drivers/net/mlx5/mlx5_flow.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright 2016 6WIND S.A.
   3  * Copyright 2016 Mellanox Technologies, Ltd
   4  */
   5
   6 #include <stdalign.h>
   7 #include <stdint.h>
   8 #include <string.h>
   9 #include <stdbool.h>
  10 #include <sys/queue.h>
  11
  12 #include <rte_common.h>
  13 #include <rte_ether.h>
  14 #include <ethdev_driver.h>
  15 #include <rte_eal_paging.h>
  16 #include <rte_flow.h>
  17 #include <rte_cycles.h>
  18 #include <rte_flow_driver.h>
  19 #include <rte_malloc.h>
  20 #include <rte_ip.h>
  21
  22 #include <mlx5_glue.h>
  23 #include <mlx5_devx_cmds.h>
  24 #include <mlx5_prm.h>
  25 #include <mlx5_malloc.h>
  26
  27 #include "mlx5_defs.h"
  28 #include "mlx5.h"
  29 #include "mlx5_flow.h"
  30 #include "mlx5_flow_os.h"
  31 #include "mlx5_rx.h"
  32 #include "mlx5_tx.h"
  33 #include "mlx5_common_os.h"
  34 #include "rte_pmd_mlx5.h"
  35
  36 struct tunnel_default_miss_ctx {
  37         uint16_t *queue;
  38         __extension__
  39         union {
  40                 struct rte_flow_action_rss action_rss;
  41                 struct rte_flow_action_queue miss_queue;
  42                 struct rte_flow_action_jump miss_jump;
  43                 uint8_t raw[0];
  44         };
  45 };
  46
  47 static int
  48 flow_tunnel_add_default_miss(struct rte_eth_dev *dev,
  49                              struct rte_flow *flow,
  50                              const struct rte_flow_attr *attr,
  51                              const struct rte_flow_action *app_actions,
  52                              uint32_t flow_idx,
  53                              struct tunnel_default_miss_ctx *ctx,
  54                              struct rte_flow_error *error);
  55 static struct mlx5_flow_tunnel *
  56 mlx5_find_tunnel_id(struct rte_eth_dev *dev, uint32_t id);
  57 static void
  58 mlx5_flow_tunnel_free(struct rte_eth_dev *dev, struct mlx5_flow_tunnel *tunnel);
  59 static uint32_t
  60 tunnel_flow_group_to_flow_table(struct rte_eth_dev *dev,
  61                                 const struct mlx5_flow_tunnel *tunnel,
  62                                 uint32_t group, uint32_t *table,
  63                                 struct rte_flow_error *error);
  64
  65 static struct mlx5_flow_workspace *mlx5_flow_push_thread_workspace(void);
  66 static void mlx5_flow_pop_thread_workspace(void);
  67
  68
  69 /** Device flow drivers. */
  70 extern const struct mlx5_flow_driver_ops mlx5_flow_verbs_drv_ops;
  71
  72 const struct mlx5_flow_driver_ops mlx5_flow_null_drv_ops;
  73
  74 const struct mlx5_flow_driver_ops *flow_drv_ops[] = {
  75         [MLX5_FLOW_TYPE_MIN] = &mlx5_flow_null_drv_ops,
  76 #if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
  77         [MLX5_FLOW_TYPE_DV] = &mlx5_flow_dv_drv_ops,
  78 #endif
  79         [MLX5_FLOW_TYPE_VERBS] = &mlx5_flow_verbs_drv_ops,
  80         [MLX5_FLOW_TYPE_MAX] = &mlx5_flow_null_drv_ops
  81 };
  82
  83 /** Helper macro to build input graph for mlx5_flow_expand_rss(). */
  84 #define MLX5_FLOW_EXPAND_RSS_NEXT(...) \
  85         (const int []){ \
  86                 __VA_ARGS__, 0, \
  87         }
  88
  89 /** Node object of input graph for mlx5_flow_expand_rss(). */
  90 struct mlx5_flow_expand_node {
  91         const int *const next;
  92         /**<
  93          * List of next node indexes. Index 0 is interpreted as a terminator.
  94          */
  95         const enum rte_flow_item_type type;
  96         /**< Pattern item type of current node. */
  97         uint64_t rss_types;
  98         /**<
  99          * RSS types bit-field associated with this node
 100          * (see ETH_RSS_* definitions).
 101          */
 102 };
 103
 104 /** Object returned by mlx5_flow_expand_rss(). */
 105 struct mlx5_flow_expand_rss {
 106         uint32_t entries;
 107         /**< Number of entries @p patterns and @p priorities. */
 108         struct {
 109                 struct rte_flow_item *pattern; /**< Expanded pattern array. */
 110                 uint32_t priority; /**< Priority offset for each expansion. */
 111         } entry[];
 112 };
 113
 114 static enum rte_flow_item_type
 115 mlx5_flow_expand_rss_item_complete(const struct rte_flow_item *item)
 116 {
 117         enum rte_flow_item_type ret = RTE_FLOW_ITEM_TYPE_VOID;
 118         uint16_t ether_type = 0;
 119         uint16_t ether_type_m;
 120         uint8_t ip_next_proto = 0;
 121         uint8_t ip_next_proto_m;
 122
 123         if (item == NULL || item->spec == NULL)
 124                 return ret;
 125         switch (item->type) {
 126         case RTE_FLOW_ITEM_TYPE_ETH:
 127                 if (item->mask)
 128                         ether_type_m = ((const struct rte_flow_item_eth *)
 129                                                 (item->mask))->type;
 130                 else
 131                         ether_type_m = rte_flow_item_eth_mask.type;
 132                 if (ether_type_m != RTE_BE16(0xFFFF))
 133                         break;
 134                 ether_type = ((const struct rte_flow_item_eth *)
 135                                 (item->spec))->type;
 136                 if (rte_be_to_cpu_16(ether_type) == RTE_ETHER_TYPE_IPV4)
 137                         ret = RTE_FLOW_ITEM_TYPE_IPV4;
 138                 else if (rte_be_to_cpu_16(ether_type) == RTE_ETHER_TYPE_IPV6)
 139                         ret = RTE_FLOW_ITEM_TYPE_IPV6;
 140                 else if (rte_be_to_cpu_16(ether_type) == RTE_ETHER_TYPE_VLAN)
 141                         ret = RTE_FLOW_ITEM_TYPE_VLAN;
 142                 else
 143                         ret = RTE_FLOW_ITEM_TYPE_END;
 144                 break;
 145         case RTE_FLOW_ITEM_TYPE_VLAN:
 146                 if (item->mask)
 147                         ether_type_m = ((const struct rte_flow_item_vlan *)
 148                                                 (item->mask))->inner_type;
 149                 else
 150                         ether_type_m = rte_flow_item_vlan_mask.inner_type;
 151                 if (ether_type_m != RTE_BE16(0xFFFF))
 152                         break;
 153                 ether_type = ((const struct rte_flow_item_vlan *)
 154                                 (item->spec))->inner_type;
 155                 if (rte_be_to_cpu_16(ether_type) == RTE_ETHER_TYPE_IPV4)
 156                         ret = RTE_FLOW_ITEM_TYPE_IPV4;
 157                 else if (rte_be_to_cpu_16(ether_type) == RTE_ETHER_TYPE_IPV6)
 158                         ret = RTE_FLOW_ITEM_TYPE_IPV6;
 159                 else if (rte_be_to_cpu_16(ether_type) == RTE_ETHER_TYPE_VLAN)
 160                         ret = RTE_FLOW_ITEM_TYPE_VLAN;
 161                 else
 162                         ret = RTE_FLOW_ITEM_TYPE_END;
 163                 break;
 164         case RTE_FLOW_ITEM_TYPE_IPV4:
 165                 if (item->mask)
 166                         ip_next_proto_m = ((const struct rte_flow_item_ipv4 *)
 167                                         (item->mask))->hdr.next_proto_id;
 168                 else
 169                         ip_next_proto_m =
 170                                 rte_flow_item_ipv4_mask.hdr.next_proto_id;
 171                 if (ip_next_proto_m != 0xFF)
 172                         break;
 173                 ip_next_proto = ((const struct rte_flow_item_ipv4 *)
 174                                 (item->spec))->hdr.next_proto_id;
 175                 if (ip_next_proto == IPPROTO_UDP)
 176                         ret = RTE_FLOW_ITEM_TYPE_UDP;
 177                 else if (ip_next_proto == IPPROTO_TCP)
 178                         ret = RTE_FLOW_ITEM_TYPE_TCP;
 179                 else if (ip_next_proto == IPPROTO_IP)
 180                         ret = RTE_FLOW_ITEM_TYPE_IPV4;
 181                 else if (ip_next_proto == IPPROTO_IPV6)
 182                         ret = RTE_FLOW_ITEM_TYPE_IPV6;
 183                 else
 184                         ret = RTE_FLOW_ITEM_TYPE_END;
 185                 break;
 186         case RTE_FLOW_ITEM_TYPE_IPV6:
 187                 if (item->mask)
 188                         ip_next_proto_m = ((const struct rte_flow_item_ipv6 *)
 189                                                 (item->mask))->hdr.proto;
 190                 else
 191                         ip_next_proto_m =
 192                                 rte_flow_item_ipv6_mask.hdr.proto;
 193                 if (ip_next_proto_m != 0xFF)
 194                         break;
 195                 ip_next_proto = ((const struct rte_flow_item_ipv6 *)
 196                                 (item->spec))->hdr.proto;
 197                 if (ip_next_proto == IPPROTO_UDP)
 198                         ret = RTE_FLOW_ITEM_TYPE_UDP;
 199                 else if (ip_next_proto == IPPROTO_TCP)
 200                         ret = RTE_FLOW_ITEM_TYPE_TCP;
 201                 else if (ip_next_proto == IPPROTO_IP)
 202                         ret = RTE_FLOW_ITEM_TYPE_IPV4;
 203                 else if (ip_next_proto == IPPROTO_IPV6)
 204                         ret = RTE_FLOW_ITEM_TYPE_IPV6;
 205                 else
 206                         ret = RTE_FLOW_ITEM_TYPE_END;
 207                 break;
 208         default:
 209                 ret = RTE_FLOW_ITEM_TYPE_VOID;
 210                 break;
 211         }
 212         return ret;
 213 }
 214
 215 #define MLX5_RSS_EXP_ELT_N 8
 216
 217 /**
 218  * Expand RSS flows into several possible flows according to the RSS hash
 219  * fields requested and the driver capabilities.
 220  *
 221  * @param[out] buf
 222  *   Buffer to store the result expansion.
 223  * @param[in] size
 224  *   Buffer size in bytes. If 0, @p buf can be NULL.
 225  * @param[in] pattern
 226  *   User flow pattern.
 227  * @param[in] types
 228  *   RSS types to expand (see ETH_RSS_* definitions).
 229  * @param[in] graph
 230  *   Input graph to expand @p pattern according to @p types.
 231  * @param[in] graph_root_index
 232  *   Index of root node in @p graph, typically 0.
 233  *
 234  * @return
 235  *   A positive value representing the size of @p buf in bytes regardless of
 236  *   @p size on success, a negative errno value otherwise and rte_errno is
 237  *   set, the following errors are defined:
 238  *
 239  *   -E2BIG: graph-depth @p graph is too deep.
 240  */
 241 static int
 242 mlx5_flow_expand_rss(struct mlx5_flow_expand_rss *buf, size_t size,
 243                      const struct rte_flow_item *pattern, uint64_t types,
 244                      const struct mlx5_flow_expand_node graph[],
 245                      int graph_root_index)
 246 {
 247         const struct rte_flow_item *item;
 248         const struct mlx5_flow_expand_node *node = &graph[graph_root_index];
 249         const int *next_node;
 250         const int *stack[MLX5_RSS_EXP_ELT_N];
 251         int stack_pos = 0;
 252         struct rte_flow_item flow_items[MLX5_RSS_EXP_ELT_N];
 253         unsigned int i;
 254         size_t lsize;
 255         size_t user_pattern_size = 0;
 256         void *addr = NULL;
 257         const struct mlx5_flow_expand_node *next = NULL;
 258         struct rte_flow_item missed_item;
 259         int missed = 0;
 260         int elt = 0;
 261         const struct rte_flow_item *last_item = NULL;
 262
 263         memset(&missed_item, 0, sizeof(missed_item));
 264         lsize = offsetof(struct mlx5_flow_expand_rss, entry) +
 265                 MLX5_RSS_EXP_ELT_N * sizeof(buf->entry[0]);
 266         if (lsize <= size) {
 267                 buf->entry[0].priority = 0;
 268                 buf->entry[0].pattern = (void *)&buf->entry[MLX5_RSS_EXP_ELT_N];
 269                 buf->entries = 0;
 270                 addr = buf->entry[0].pattern;
 271         }
 272         for (item = pattern; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
 273                 if (item->type != RTE_FLOW_ITEM_TYPE_VOID)
 274                         last_item = item;
 275                 for (i = 0; node->next && node->next[i]; ++i) {
 276                         next = &graph[node->next[i]];
 277                         if (next->type == item->type)
 278                                 break;
 279                 }
 280                 if (next)
 281                         node = next;
 282                 user_pattern_size += sizeof(*item);
 283         }
 284         user_pattern_size += sizeof(*item); /* Handle END item. */
 285         lsize += user_pattern_size;
 286         /* Copy the user pattern in the first entry of the buffer. */
 287         if (lsize <= size) {
 288                 rte_memcpy(addr, pattern, user_pattern_size);
 289                 addr = (void *)(((uintptr_t)addr) + user_pattern_size);
 290                 buf->entries = 1;
 291         }
 292         /* Start expanding. */
 293         memset(flow_items, 0, sizeof(flow_items));
 294         user_pattern_size -= sizeof(*item);
 295         /*
 296          * Check if the last valid item has spec set, need complete pattern,
 297          * and the pattern can be used for expansion.
 298          */
 299         missed_item.type = mlx5_flow_expand_rss_item_complete(last_item);
 300         if (missed_item.type == RTE_FLOW_ITEM_TYPE_END) {
 301                 /* Item type END indicates expansion is not required. */
 302                 return lsize;
 303         }
 304         if (missed_item.type != RTE_FLOW_ITEM_TYPE_VOID) {
 305                 next = NULL;
 306                 missed = 1;
 307                 for (i = 0; node->next && node->next[i]; ++i) {
 308                         next = &graph[node->next[i]];
 309                         if (next->type == missed_item.type) {
 310                                 flow_items[0].type = missed_item.type;
 311                                 flow_items[1].type = RTE_FLOW_ITEM_TYPE_END;
 312                                 break;
 313                         }
 314                         next = NULL;
 315                 }
 316         }
 317         if (next && missed) {
 318                 elt = 2; /* missed item + item end. */
 319                 node = next;
 320                 lsize += elt * sizeof(*item) + user_pattern_size;
 321                 if ((node->rss_types & types) && lsize <= size) {
 322                         buf->entry[buf->entries].priority = 1;
 323                         buf->entry[buf->entries].pattern = addr;
 324                         buf->entries++;
 325                         rte_memcpy(addr, buf->entry[0].pattern,
 326                                    user_pattern_size);
 327                         addr = (void *)(((uintptr_t)addr) + user_pattern_size);
 328                         rte_memcpy(addr, flow_items, elt * sizeof(*item));
 329                         addr = (void *)(((uintptr_t)addr) +
 330                                         elt * sizeof(*item));
 331                 }
 332         }
 333         memset(flow_items, 0, sizeof(flow_items));
 334         next_node = node->next;
 335         stack[stack_pos] = next_node;
 336         node = next_node ? &graph[*next_node] : NULL;
 337         while (node) {
 338                 flow_items[stack_pos].type = node->type;
 339                 if (node->rss_types & types) {
 340                         /*
 341                          * compute the number of items to copy from the
 342                          * expansion and copy it.
 343                          * When the stack_pos is 0, there are 1 element in it,
 344                          * plus the addition END item.
 345                          */
 346                         elt = stack_pos + 2;
 347                         flow_items[stack_pos + 1].type = RTE_FLOW_ITEM_TYPE_END;
 348                         lsize += elt * sizeof(*item) + user_pattern_size;
 349                         if (lsize <= size) {
 350                                 size_t n = elt * sizeof(*item);
 351
 352                                 buf->entry[buf->entries].priority =
 353                                         stack_pos + 1 + missed;
 354                                 buf->entry[buf->entries].pattern = addr;
 355                                 buf->entries++;
 356                                 rte_memcpy(addr, buf->entry[0].pattern,
 357                                            user_pattern_size);
 358                                 addr = (void *)(((uintptr_t)addr) +
 359                                                 user_pattern_size);
 360                                 rte_memcpy(addr, &missed_item,
 361                                            missed * sizeof(*item));
 362                                 addr = (void *)(((uintptr_t)addr) +
 363                                         missed * sizeof(*item));
 364                                 rte_memcpy(addr, flow_items, n);
 365                                 addr = (void *)(((uintptr_t)addr) + n);
 366                         }
 367                 }
 368                 /* Go deeper. */
 369                 if (node->next) {
 370                         next_node = node->next;
 371                         if (stack_pos++ == MLX5_RSS_EXP_ELT_N) {
 372                                 rte_errno = E2BIG;
 373                                 return -rte_errno;
 374                         }
 375                         stack[stack_pos] = next_node;
 376                 } else if (*(next_node + 1)) {
 377                         /* Follow up with the next possibility. */
 378                         ++next_node;
 379                 } else {
 380                         /* Move to the next path. */
 381                         if (stack_pos)
 382                                 next_node = stack[--stack_pos];
 383                         next_node++;
 384                         stack[stack_pos] = next_node;
 385                 }
 386                 node = *next_node ? &graph[*next_node] : NULL;
 387         };
 388         return lsize;
 389 }
 390
 391 enum mlx5_expansion {
 392         MLX5_EXPANSION_ROOT,
 393         MLX5_EXPANSION_ROOT_OUTER,
 394         MLX5_EXPANSION_ROOT_ETH_VLAN,
 395         MLX5_EXPANSION_ROOT_OUTER_ETH_VLAN,
 396         MLX5_EXPANSION_OUTER_ETH,
 397         MLX5_EXPANSION_OUTER_ETH_VLAN,
 398         MLX5_EXPANSION_OUTER_VLAN,
 399         MLX5_EXPANSION_OUTER_IPV4,
 400         MLX5_EXPANSION_OUTER_IPV4_UDP,
 401         MLX5_EXPANSION_OUTER_IPV4_TCP,
 402         MLX5_EXPANSION_OUTER_IPV6,
 403         MLX5_EXPANSION_OUTER_IPV6_UDP,
 404         MLX5_EXPANSION_OUTER_IPV6_TCP,
 405         MLX5_EXPANSION_VXLAN,
 406         MLX5_EXPANSION_VXLAN_GPE,
 407         MLX5_EXPANSION_GRE,
 408         MLX5_EXPANSION_MPLS,
 409         MLX5_EXPANSION_ETH,
 410         MLX5_EXPANSION_ETH_VLAN,
 411         MLX5_EXPANSION_VLAN,
 412         MLX5_EXPANSION_IPV4,
 413         MLX5_EXPANSION_IPV4_UDP,
 414         MLX5_EXPANSION_IPV4_TCP,
 415         MLX5_EXPANSION_IPV6,
 416         MLX5_EXPANSION_IPV6_UDP,
 417         MLX5_EXPANSION_IPV6_TCP,
 418 };
 419
 420 /** Supported expansion of items. */
 421 static const struct mlx5_flow_expand_node mlx5_support_expansion[] = {
 422         [MLX5_EXPANSION_ROOT] = {
 423                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
 424                                                   MLX5_EXPANSION_IPV4,
 425                                                   MLX5_EXPANSION_IPV6),
 426                 .type = RTE_FLOW_ITEM_TYPE_END,
 427         },
 428         [MLX5_EXPANSION_ROOT_OUTER] = {
 429                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_ETH,
 430                                                   MLX5_EXPANSION_OUTER_IPV4,
 431                                                   MLX5_EXPANSION_OUTER_IPV6),
 432                 .type = RTE_FLOW_ITEM_TYPE_END,
 433         },
 434         [MLX5_EXPANSION_ROOT_ETH_VLAN] = {
 435                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH_VLAN),
 436                 .type = RTE_FLOW_ITEM_TYPE_END,
 437         },
 438         [MLX5_EXPANSION_ROOT_OUTER_ETH_VLAN] = {
 439                 .next = MLX5_FLOW_EXPAND_RSS_NEXT
 440                                                 (MLX5_EXPANSION_OUTER_ETH_VLAN),
 441                 .type = RTE_FLOW_ITEM_TYPE_END,
 442         },
 443         [MLX5_EXPANSION_OUTER_ETH] = {
 444                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_IPV4,
 445                                                   MLX5_EXPANSION_OUTER_IPV6,
 446                                                   MLX5_EXPANSION_MPLS),
 447                 .type = RTE_FLOW_ITEM_TYPE_ETH,
 448                 .rss_types = 0,
 449         },
 450         [MLX5_EXPANSION_OUTER_ETH_VLAN] = {
 451                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_VLAN),
 452                 .type = RTE_FLOW_ITEM_TYPE_ETH,
 453                 .rss_types = 0,
 454         },
 455         [MLX5_EXPANSION_OUTER_VLAN] = {
 456                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_IPV4,
 457                                                   MLX5_EXPANSION_OUTER_IPV6),
 458                 .type = RTE_FLOW_ITEM_TYPE_VLAN,
 459         },
 460         [MLX5_EXPANSION_OUTER_IPV4] = {
 461                 .next = MLX5_FLOW_EXPAND_RSS_NEXT
 462                         (MLX5_EXPANSION_OUTER_IPV4_UDP,
 463                          MLX5_EXPANSION_OUTER_IPV4_TCP,
 464                          MLX5_EXPANSION_GRE,
 465                          MLX5_EXPANSION_IPV4,
 466                          MLX5_EXPANSION_IPV6),
 467                 .type = RTE_FLOW_ITEM_TYPE_IPV4,
 468                 .rss_types = ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
 469                         ETH_RSS_NONFRAG_IPV4_OTHER,
 470         },
 471         [MLX5_EXPANSION_OUTER_IPV4_UDP] = {
 472                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN,
 473                                                   MLX5_EXPANSION_VXLAN_GPE),
 474                 .type = RTE_FLOW_ITEM_TYPE_UDP,
 475                 .rss_types = ETH_RSS_NONFRAG_IPV4_UDP,
 476         },
 477         [MLX5_EXPANSION_OUTER_IPV4_TCP] = {
 478                 .type = RTE_FLOW_ITEM_TYPE_TCP,
 479                 .rss_types = ETH_RSS_NONFRAG_IPV4_TCP,
 480         },
 481         [MLX5_EXPANSION_OUTER_IPV6] = {
 482                 .next = MLX5_FLOW_EXPAND_RSS_NEXT
 483                         (MLX5_EXPANSION_OUTER_IPV6_UDP,
 484                          MLX5_EXPANSION_OUTER_IPV6_TCP,
 485                          MLX5_EXPANSION_IPV4,
 486                          MLX5_EXPANSION_IPV6,
 487                          MLX5_EXPANSION_GRE),
 488                 .type = RTE_FLOW_ITEM_TYPE_IPV6,
 489                 .rss_types = ETH_RSS_IPV6 | ETH_RSS_FRAG_IPV6 |
 490                         ETH_RSS_NONFRAG_IPV6_OTHER,
 491         },
 492         [MLX5_EXPANSION_OUTER_IPV6_UDP] = {
 493                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN,
 494                                                   MLX5_EXPANSION_VXLAN_GPE),
 495                 .type = RTE_FLOW_ITEM_TYPE_UDP,
 496                 .rss_types = ETH_RSS_NONFRAG_IPV6_UDP,
 497         },
 498         [MLX5_EXPANSION_OUTER_IPV6_TCP] = {
 499                 .type = RTE_FLOW_ITEM_TYPE_TCP,
 500                 .rss_types = ETH_RSS_NONFRAG_IPV6_TCP,
 501         },
 502         [MLX5_EXPANSION_VXLAN] = {
 503                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
 504                                                   MLX5_EXPANSION_IPV4,
 505                                                   MLX5_EXPANSION_IPV6),
 506                 .type = RTE_FLOW_ITEM_TYPE_VXLAN,
 507         },
 508         [MLX5_EXPANSION_VXLAN_GPE] = {
 509                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
 510                                                   MLX5_EXPANSION_IPV4,
 511                                                   MLX5_EXPANSION_IPV6),
 512                 .type = RTE_FLOW_ITEM_TYPE_VXLAN_GPE,
 513         },
 514         [MLX5_EXPANSION_GRE] = {
 515                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
 516                                                   MLX5_EXPANSION_IPV6),
 517                 .type = RTE_FLOW_ITEM_TYPE_GRE,
 518         },
 519         [MLX5_EXPANSION_MPLS] = {
 520                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
 521                                                   MLX5_EXPANSION_IPV6),
 522                 .type = RTE_FLOW_ITEM_TYPE_MPLS,
 523         },
 524         [MLX5_EXPANSION_ETH] = {
 525                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
 526                                                   MLX5_EXPANSION_IPV6),
 527                 .type = RTE_FLOW_ITEM_TYPE_ETH,
 528         },
 529         [MLX5_EXPANSION_ETH_VLAN] = {
 530                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VLAN),
 531                 .type = RTE_FLOW_ITEM_TYPE_ETH,
 532         },
 533         [MLX5_EXPANSION_VLAN] = {
 534                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
 535                                                   MLX5_EXPANSION_IPV6),
 536                 .type = RTE_FLOW_ITEM_TYPE_VLAN,
 537         },
 538         [MLX5_EXPANSION_IPV4] = {
 539                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4_UDP,
 540                                                   MLX5_EXPANSION_IPV4_TCP),
 541                 .type = RTE_FLOW_ITEM_TYPE_IPV4,
 542                 .rss_types = ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
 543                         ETH_RSS_NONFRAG_IPV4_OTHER,
 544         },
 545         [MLX5_EXPANSION_IPV4_UDP] = {
 546                 .type = RTE_FLOW_ITEM_TYPE_UDP,
 547                 .rss_types = ETH_RSS_NONFRAG_IPV4_UDP,
 548         },
 549         [MLX5_EXPANSION_IPV4_TCP] = {
 550                 .type = RTE_FLOW_ITEM_TYPE_TCP,
 551                 .rss_types = ETH_RSS_NONFRAG_IPV4_TCP,
 552         },
 553         [MLX5_EXPANSION_IPV6] = {
 554                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV6_UDP,
 555                                                   MLX5_EXPANSION_IPV6_TCP),
 556                 .type = RTE_FLOW_ITEM_TYPE_IPV6,
 557                 .rss_types = ETH_RSS_IPV6 | ETH_RSS_FRAG_IPV6 |
 558                         ETH_RSS_NONFRAG_IPV6_OTHER,
 559         },
 560         [MLX5_EXPANSION_IPV6_UDP] = {
 561                 .type = RTE_FLOW_ITEM_TYPE_UDP,
 562                 .rss_types = ETH_RSS_NONFRAG_IPV6_UDP,
 563         },
 564         [MLX5_EXPANSION_IPV6_TCP] = {
 565                 .type = RTE_FLOW_ITEM_TYPE_TCP,
 566                 .rss_types = ETH_RSS_NONFRAG_IPV6_TCP,
 567         },
 568 };
 569
 570 static struct rte_flow_action_handle *
 571 mlx5_action_handle_create(struct rte_eth_dev *dev,
 572                           const struct rte_flow_indir_action_conf *conf,
 573                           const struct rte_flow_action *action,
 574                           struct rte_flow_error *error);
 575 static int mlx5_action_handle_destroy
 576                                 (struct rte_eth_dev *dev,
 577                                  struct rte_flow_action_handle *handle,
 578                                  struct rte_flow_error *error);
 579 static int mlx5_action_handle_update
 580                                 (struct rte_eth_dev *dev,
 581                                  struct rte_flow_action_handle *handle,
 582                                  const void *update,
 583                                  struct rte_flow_error *error);
 584 static int mlx5_action_handle_query
 585                                 (struct rte_eth_dev *dev,
 586                                  const struct rte_flow_action_handle *handle,
 587                                  void *data,
 588                                  struct rte_flow_error *error);
 589 static int
 590 mlx5_flow_tunnel_decap_set(struct rte_eth_dev *dev,
 591                     struct rte_flow_tunnel *app_tunnel,
 592                     struct rte_flow_action **actions,
 593                     uint32_t *num_of_actions,
 594                     struct rte_flow_error *error);
 595 static int
 596 mlx5_flow_tunnel_match(struct rte_eth_dev *dev,
 597                        struct rte_flow_tunnel *app_tunnel,
 598                        struct rte_flow_item **items,
 599                        uint32_t *num_of_items,
 600                        struct rte_flow_error *error);
 601 static int
 602 mlx5_flow_tunnel_item_release(struct rte_eth_dev *dev,
 603                               struct rte_flow_item *pmd_items,
 604                               uint32_t num_items, struct rte_flow_error *err);
 605 static int
 606 mlx5_flow_tunnel_action_release(struct rte_eth_dev *dev,
 607                                 struct rte_flow_action *pmd_actions,
 608                                 uint32_t num_actions,
 609                                 struct rte_flow_error *err);
 610 static int
 611 mlx5_flow_tunnel_get_restore_info(struct rte_eth_dev *dev,
 612                                   struct rte_mbuf *m,
 613                                   struct rte_flow_restore_info *info,
 614                                   struct rte_flow_error *err);
 615
 616 static const struct rte_flow_ops mlx5_flow_ops = {
 617         .validate = mlx5_flow_validate,
 618         .create = mlx5_flow_create,
 619         .destroy = mlx5_flow_destroy,
 620         .flush = mlx5_flow_flush,
 621         .isolate = mlx5_flow_isolate,
 622         .query = mlx5_flow_query,
 623         .dev_dump = mlx5_flow_dev_dump,
 624         .get_aged_flows = mlx5_flow_get_aged_flows,
 625         .action_handle_create = mlx5_action_handle_create,
 626         .action_handle_destroy = mlx5_action_handle_destroy,
 627         .action_handle_update = mlx5_action_handle_update,
 628         .action_handle_query = mlx5_action_handle_query,
 629         .tunnel_decap_set = mlx5_flow_tunnel_decap_set,
 630         .tunnel_match = mlx5_flow_tunnel_match,
 631         .tunnel_action_decap_release = mlx5_flow_tunnel_action_release,
 632         .tunnel_item_release = mlx5_flow_tunnel_item_release,
 633         .get_restore_info = mlx5_flow_tunnel_get_restore_info,
 634 };
 635
 636 /* Tunnel information. */
 637 struct mlx5_flow_tunnel_info {
 638         uint64_t tunnel; /**< Tunnel bit (see MLX5_FLOW_*). */
 639         uint32_t ptype; /**< Tunnel Ptype (see RTE_PTYPE_*). */
 640 };
 641
 642 static struct mlx5_flow_tunnel_info tunnels_info[] = {
 643         {
 644                 .tunnel = MLX5_FLOW_LAYER_VXLAN,
 645                 .ptype = RTE_PTYPE_TUNNEL_VXLAN | RTE_PTYPE_L4_UDP,
 646         },
 647         {
 648                 .tunnel = MLX5_FLOW_LAYER_GENEVE,
 649                 .ptype = RTE_PTYPE_TUNNEL_GENEVE | RTE_PTYPE_L4_UDP,
 650         },
 651         {
 652                 .tunnel = MLX5_FLOW_LAYER_VXLAN_GPE,
 653                 .ptype = RTE_PTYPE_TUNNEL_VXLAN_GPE | RTE_PTYPE_L4_UDP,
 654         },
 655         {
 656                 .tunnel = MLX5_FLOW_LAYER_GRE,
 657                 .ptype = RTE_PTYPE_TUNNEL_GRE,
 658         },
 659         {
 660                 .tunnel = MLX5_FLOW_LAYER_MPLS | MLX5_FLOW_LAYER_OUTER_L4_UDP,
 661                 .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_UDP | RTE_PTYPE_L4_UDP,
 662         },
 663         {
 664                 .tunnel = MLX5_FLOW_LAYER_MPLS,
 665                 .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE,
 666         },
 667         {
 668                 .tunnel = MLX5_FLOW_LAYER_NVGRE,
 669                 .ptype = RTE_PTYPE_TUNNEL_NVGRE,
 670         },
 671         {
 672                 .tunnel = MLX5_FLOW_LAYER_IPIP,
 673                 .ptype = RTE_PTYPE_TUNNEL_IP,
 674         },
 675         {
 676                 .tunnel = MLX5_FLOW_LAYER_IPV6_ENCAP,
 677                 .ptype = RTE_PTYPE_TUNNEL_IP,
 678         },
 679         {
 680                 .tunnel = MLX5_FLOW_LAYER_GTP,
 681                 .ptype = RTE_PTYPE_TUNNEL_GTPU,
 682         },
 683 };
 684
 685
 686
 687 /**
 688  * Translate tag ID to register.
 689  *
 690  * @param[in] dev
 691  *   Pointer to the Ethernet device structure.
 692  * @param[in] feature
 693  *   The feature that request the register.
 694  * @param[in] id
 695  *   The request register ID.
 696  * @param[out] error
 697  *   Error description in case of any.
 698  *
 699  * @return
 700  *   The request register on success, a negative errno
 701  *   value otherwise and rte_errno is set.
 702  */
 703 int
 704 mlx5_flow_get_reg_id(struct rte_eth_dev *dev,
 705                      enum mlx5_feature_name feature,
 706                      uint32_t id,
 707                      struct rte_flow_error *error)
 708 {
 709         struct mlx5_priv *priv = dev->data->dev_private;
 710         struct mlx5_dev_config *config = &priv->config;
 711         enum modify_reg start_reg;
 712         bool skip_mtr_reg = false;
 713
 714         switch (feature) {
 715         case MLX5_HAIRPIN_RX:
 716                 return REG_B;
 717         case MLX5_HAIRPIN_TX:
 718                 return REG_A;
 719         case MLX5_METADATA_RX:
 720                 switch (config->dv_xmeta_en) {
 721                 case MLX5_XMETA_MODE_LEGACY:
 722                         return REG_B;
 723                 case MLX5_XMETA_MODE_META16:
 724                         return REG_C_0;
 725                 case MLX5_XMETA_MODE_META32:
 726                         return REG_C_1;
 727                 }
 728                 break;
 729         case MLX5_METADATA_TX:
 730                 return REG_A;
 731         case MLX5_METADATA_FDB:
 732                 switch (config->dv_xmeta_en) {
 733                 case MLX5_XMETA_MODE_LEGACY:
 734                         return REG_NON;
 735                 case MLX5_XMETA_MODE_META16:
 736                         return REG_C_0;
 737                 case MLX5_XMETA_MODE_META32:
 738                         return REG_C_1;
 739                 }
 740                 break;
 741         case MLX5_FLOW_MARK:
 742                 switch (config->dv_xmeta_en) {
 743                 case MLX5_XMETA_MODE_LEGACY:
 744                         return REG_NON;
 745                 case MLX5_XMETA_MODE_META16:
 746                         return REG_C_1;
 747                 case MLX5_XMETA_MODE_META32:
 748                         return REG_C_0;
 749                 }
 750                 break;
 751         case MLX5_MTR_ID:
 752                 /*
 753                  * If meter color and meter id share one register, flow match
 754                  * should use the meter color register for match.
 755                  */
 756                 if (priv->mtr_reg_share)
 757                         return priv->mtr_color_reg;
 758                 else
 759                         return priv->mtr_color_reg != REG_C_2 ? REG_C_2 :
 760                                REG_C_3;
 761         case MLX5_MTR_COLOR:
 762         case MLX5_ASO_FLOW_HIT: /* Both features use the same REG_C. */
 763                 MLX5_ASSERT(priv->mtr_color_reg != REG_NON);
 764                 return priv->mtr_color_reg;
 765         case MLX5_COPY_MARK:
 766                 /*
 767                  * Metadata COPY_MARK register using is in meter suffix sub
 768                  * flow while with meter. It's safe to share the same register.
 769                  */
 770                 return priv->mtr_color_reg != REG_C_2 ? REG_C_2 : REG_C_3;
 771         case MLX5_APP_TAG:
 772                 /*
 773                  * If meter is enable, it will engage the register for color
 774                  * match and flow match. If meter color match is not using the
 775                  * REG_C_2, need to skip the REG_C_x be used by meter color
 776                  * match.
 777                  * If meter is disable, free to use all available registers.
 778                  */
 779                 start_reg = priv->mtr_color_reg != REG_C_2 ? REG_C_2 :
 780                             (priv->mtr_reg_share ? REG_C_3 : REG_C_4);
 781                 skip_mtr_reg = !!(priv->mtr_en && start_reg == REG_C_2);
 782                 if (id > (uint32_t)(REG_C_7 - start_reg))
 783                         return rte_flow_error_set(error, EINVAL,
 784                                                   RTE_FLOW_ERROR_TYPE_ITEM,
 785                                                   NULL, "invalid tag id");
 786                 if (config->flow_mreg_c[id + start_reg - REG_C_0] == REG_NON)
 787                         return rte_flow_error_set(error, ENOTSUP,
 788                                                   RTE_FLOW_ERROR_TYPE_ITEM,
 789                                                   NULL, "unsupported tag id");
 790                 /*
 791                  * This case means meter is using the REG_C_x great than 2.
 792                  * Take care not to conflict with meter color REG_C_x.
 793                  * If the available index REG_C_y >= REG_C_x, skip the
 794                  * color register.
 795                  */
 796                 if (skip_mtr_reg && config->flow_mreg_c
 797                     [id + start_reg - REG_C_0] >= priv->mtr_color_reg) {
 798                         if (id >= (uint32_t)(REG_C_7 - start_reg))
 799                                 return rte_flow_error_set(error, EINVAL,
 800                                                        RTE_FLOW_ERROR_TYPE_ITEM,
 801                                                         NULL, "invalid tag id");
 802                         if (config->flow_mreg_c
 803                             [id + 1 + start_reg - REG_C_0] != REG_NON)
 804                                 return config->flow_mreg_c
 805                                                [id + 1 + start_reg - REG_C_0];
 806                         return rte_flow_error_set(error, ENOTSUP,
 807                                                   RTE_FLOW_ERROR_TYPE_ITEM,
 808                                                   NULL, "unsupported tag id");
 809                 }
 810                 return config->flow_mreg_c[id + start_reg - REG_C_0];
 811         }
 812         MLX5_ASSERT(false);
 813         return rte_flow_error_set(error, EINVAL,
 814                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
 815                                   NULL, "invalid feature name");
 816 }
 817
 818 /**
 819  * Check extensive flow metadata register support.
 820  *
 821  * @param dev
 822  *   Pointer to rte_eth_dev structure.
 823  *
 824  * @return
 825  *   True if device supports extensive flow metadata register, otherwise false.
 826  */
 827 bool
 828 mlx5_flow_ext_mreg_supported(struct rte_eth_dev *dev)
 829 {
 830         struct mlx5_priv *priv = dev->data->dev_private;
 831         struct mlx5_dev_config *config = &priv->config;
 832
 833         /*
 834          * Having available reg_c can be regarded inclusively as supporting
 835          * extensive flow metadata register, which could mean,
 836          * - metadata register copy action by modify header.
 837          * - 16 modify header actions is supported.
 838          * - reg_c's are preserved across different domain (FDB and NIC) on
 839          *   packet loopback by flow lookup miss.
 840          */
 841         return config->flow_mreg_c[2] != REG_NON;
 842 }
 843
 844 /**
 845  * Get the lowest priority.
 846  *
 847  * @param[in] dev
 848  *   Pointer to the Ethernet device structure.
 849  * @param[in] attributes
 850  *   Pointer to device flow rule attributes.
 851  *
 852  * @return
 853  *   The value of lowest priority of flow.
 854  */
 855 uint32_t
 856 mlx5_get_lowest_priority(struct rte_eth_dev *dev,
 857                           const struct rte_flow_attr *attr)
 858 {
 859         struct mlx5_priv *priv = dev->data->dev_private;
 860
 861         if (!attr->group && !attr->transfer)
 862                 return priv->config.flow_prio - 2;
 863         return MLX5_NON_ROOT_FLOW_MAX_PRIO - 1;
 864 }
 865
 866 /**
 867  * Calculate matcher priority of the flow.
 868  *
 869  * @param[in] dev
 870  *   Pointer to the Ethernet device structure.
 871  * @param[in] attr
 872  *   Pointer to device flow rule attributes.
 873  * @param[in] subpriority
 874  *   The priority based on the items.
 875  * @return
 876  *   The matcher priority of the flow.
 877  */
 878 uint16_t
 879 mlx5_get_matcher_priority(struct rte_eth_dev *dev,
 880                           const struct rte_flow_attr *attr,
 881                           uint32_t subpriority)
 882 {
 883         uint16_t priority = (uint16_t)attr->priority;
 884         struct mlx5_priv *priv = dev->data->dev_private;
 885
 886         if (!attr->group && !attr->transfer) {
 887                 if (attr->priority == MLX5_FLOW_LOWEST_PRIO_INDICATOR)
 888                         priority = priv->config.flow_prio - 1;
 889                 return mlx5_os_flow_adjust_priority(dev, priority, subpriority);
 890         }
 891         if (attr->priority == MLX5_FLOW_LOWEST_PRIO_INDICATOR)
 892                 priority = MLX5_NON_ROOT_FLOW_MAX_PRIO;
 893         return priority * 3 + subpriority;
 894 }
 895
 896 /**
 897  * Verify the @p item specifications (spec, last, mask) are compatible with the
 898  * NIC capabilities.
 899  *
 900  * @param[in] item
 901  *   Item specification.
 902  * @param[in] mask
 903  *   @p item->mask or flow default bit-masks.
 904  * @param[in] nic_mask
 905  *   Bit-masks covering supported fields by the NIC to compare with user mask.
 906  * @param[in] size
 907  *   Bit-masks size in bytes.
 908  * @param[in] range_accepted
 909  *   True if range of values is accepted for specific fields, false otherwise.
 910  * @param[out] error
 911  *   Pointer to error structure.
 912  *
 913  * @return
 914  *   0 on success, a negative errno value otherwise and rte_errno is set.
 915  */
 916 int
 917 mlx5_flow_item_acceptable(const struct rte_flow_item *item,
 918                           const uint8_t *mask,
 919                           const uint8_t *nic_mask,
 920                           unsigned int size,
 921                           bool range_accepted,
 922                           struct rte_flow_error *error)
 923 {
 924         unsigned int i;
 925
 926         MLX5_ASSERT(nic_mask);
 927         for (i = 0; i < size; ++i)
 928                 if ((nic_mask[i] | mask[i]) != nic_mask[i])
 929                         return rte_flow_error_set(error, ENOTSUP,
 930                                                   RTE_FLOW_ERROR_TYPE_ITEM,
 931                                                   item,
 932                                                   "mask enables non supported"
 933                                                   " bits");
 934         if (!item->spec && (item->mask || item->last))
 935                 return rte_flow_error_set(error, EINVAL,
 936                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
 937                                           "mask/last without a spec is not"
 938                                           " supported");
 939         if (item->spec && item->last && !range_accepted) {
 940                 uint8_t spec[size];
 941                 uint8_t last[size];
 942                 unsigned int i;
 943                 int ret;
 944
 945                 for (i = 0; i < size; ++i) {
 946                         spec[i] = ((const uint8_t *)item->spec)[i] & mask[i];
 947                         last[i] = ((const uint8_t *)item->last)[i] & mask[i];
 948                 }
 949                 ret = memcmp(spec, last, size);
 950                 if (ret != 0)
 951                         return rte_flow_error_set(error, EINVAL,
 952                                                   RTE_FLOW_ERROR_TYPE_ITEM,
 953                                                   item,
 954                                                   "range is not valid");
 955         }
 956         return 0;
 957 }
 958
 959 /**
 960  * Adjust the hash fields according to the @p flow information.
 961  *
 962  * @param[in] dev_flow.
 963  *   Pointer to the mlx5_flow.
 964  * @param[in] tunnel
 965  *   1 when the hash field is for a tunnel item.
 966  * @param[in] layer_types
 967  *   ETH_RSS_* types.
 968  * @param[in] hash_fields
 969  *   Item hash fields.
 970  *
 971  * @return
 972  *   The hash fields that should be used.
 973  */
 974 uint64_t
 975 mlx5_flow_hashfields_adjust(struct mlx5_flow_rss_desc *rss_desc,
 976                             int tunnel __rte_unused, uint64_t layer_types,
 977                             uint64_t hash_fields)
 978 {
 979 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
 980         int rss_request_inner = rss_desc->level >= 2;
 981
 982         /* Check RSS hash level for tunnel. */
 983         if (tunnel && rss_request_inner)
 984                 hash_fields |= IBV_RX_HASH_INNER;
 985         else if (tunnel || rss_request_inner)
 986                 return 0;
 987 #endif
 988         /* Check if requested layer matches RSS hash fields. */
 989         if (!(rss_desc->types & layer_types))
 990                 return 0;
 991         return hash_fields;
 992 }
 993
 994 /**
 995  * Lookup and set the ptype in the data Rx part.  A single Ptype can be used,
 996  * if several tunnel rules are used on this queue, the tunnel ptype will be
 997  * cleared.
 998  *
 999  * @param rxq_ctrl
1000  *   Rx queue to update.
1001  */
1002 static void
1003 flow_rxq_tunnel_ptype_update(struct mlx5_rxq_ctrl *rxq_ctrl)
1004 {
1005         unsigned int i;
1006         uint32_t tunnel_ptype = 0;
1007
1008         /* Look up for the ptype to use. */
1009         for (i = 0; i != MLX5_FLOW_TUNNEL; ++i) {
1010                 if (!rxq_ctrl->flow_tunnels_n[i])
1011                         continue;
1012                 if (!tunnel_ptype) {
1013                         tunnel_ptype = tunnels_info[i].ptype;
1014                 } else {
1015                         tunnel_ptype = 0;
1016                         break;
1017                 }
1018         }
1019         rxq_ctrl->rxq.tunnel = tunnel_ptype;
1020 }
1021
1022 /**
1023  * Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) according to the devive
1024  * flow.
1025  *
1026  * @param[in] dev
1027  *   Pointer to the Ethernet device structure.
1028  * @param[in] dev_handle
1029  *   Pointer to device flow handle structure.
1030  */
1031 static void
1032 flow_drv_rxq_flags_set(struct rte_eth_dev *dev,
1033                        struct mlx5_flow_handle *dev_handle)
1034 {
1035         struct mlx5_priv *priv = dev->data->dev_private;
1036         const int mark = dev_handle->mark;
1037         const int tunnel = !!(dev_handle->layers & MLX5_FLOW_LAYER_TUNNEL);
1038         struct mlx5_ind_table_obj *ind_tbl = NULL;
1039         unsigned int i;
1040
1041         if (dev_handle->fate_action == MLX5_FLOW_FATE_QUEUE) {
1042                 struct mlx5_hrxq *hrxq;
1043
1044                 hrxq = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_HRXQ],
1045                               dev_handle->rix_hrxq);
1046                 if (hrxq)
1047                         ind_tbl = hrxq->ind_table;
1048         } else if (dev_handle->fate_action == MLX5_FLOW_FATE_SHARED_RSS) {
1049                 struct mlx5_shared_action_rss *shared_rss;
1050
1051                 shared_rss = mlx5_ipool_get
1052                         (priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
1053                          dev_handle->rix_srss);
1054                 if (shared_rss)
1055                         ind_tbl = shared_rss->ind_tbl;
1056         }
1057         if (!ind_tbl)
1058                 return;
1059         for (i = 0; i != ind_tbl->queues_n; ++i) {
1060                 int idx = ind_tbl->queues[i];
1061                 struct mlx5_rxq_ctrl *rxq_ctrl =
1062                         container_of((*priv->rxqs)[idx],
1063                                      struct mlx5_rxq_ctrl, rxq);
1064
1065                 /*
1066                  * To support metadata register copy on Tx loopback,
1067                  * this must be always enabled (metadata may arive
1068                  * from other port - not from local flows only.
1069                  */
1070                 if (priv->config.dv_flow_en &&
1071                     priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
1072                     mlx5_flow_ext_mreg_supported(dev)) {
1073                         rxq_ctrl->rxq.mark = 1;
1074                         rxq_ctrl->flow_mark_n = 1;
1075                 } else if (mark) {
1076                         rxq_ctrl->rxq.mark = 1;
1077                         rxq_ctrl->flow_mark_n++;
1078                 }
1079                 if (tunnel) {
1080                         unsigned int j;
1081
1082                         /* Increase the counter matching the flow. */
1083                         for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
1084                                 if ((tunnels_info[j].tunnel &
1085                                      dev_handle->layers) ==
1086                                     tunnels_info[j].tunnel) {
1087                                         rxq_ctrl->flow_tunnels_n[j]++;
1088                                         break;
1089                                 }
1090                         }
1091                         flow_rxq_tunnel_ptype_update(rxq_ctrl);
1092                 }
1093         }
1094 }
1095
1096 /**
1097  * Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) for a flow
1098  *
1099  * @param[in] dev
1100  *   Pointer to the Ethernet device structure.
1101  * @param[in] flow
1102  *   Pointer to flow structure.
1103  */
1104 static void
1105 flow_rxq_flags_set(struct rte_eth_dev *dev, struct rte_flow *flow)
1106 {
1107         struct mlx5_priv *priv = dev->data->dev_private;
1108         uint32_t handle_idx;
1109         struct mlx5_flow_handle *dev_handle;
1110
1111         SILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW], flow->dev_handles,
1112                        handle_idx, dev_handle, next)
1113                 flow_drv_rxq_flags_set(dev, dev_handle);
1114 }
1115
1116 /**
1117  * Clear the Rx queue flags (Mark/Flag and Tunnel Ptype) associated with the
1118  * device flow if no other flow uses it with the same kind of request.
1119  *
1120  * @param dev
1121  *   Pointer to Ethernet device.
1122  * @param[in] dev_handle
1123  *   Pointer to the device flow handle structure.
1124  */
1125 static void
1126 flow_drv_rxq_flags_trim(struct rte_eth_dev *dev,
1127                         struct mlx5_flow_handle *dev_handle)
1128 {
1129         struct mlx5_priv *priv = dev->data->dev_private;
1130         const int mark = dev_handle->mark;
1131         const int tunnel = !!(dev_handle->layers & MLX5_FLOW_LAYER_TUNNEL);
1132         struct mlx5_ind_table_obj *ind_tbl = NULL;
1133         unsigned int i;
1134
1135         if (dev_handle->fate_action == MLX5_FLOW_FATE_QUEUE) {
1136                 struct mlx5_hrxq *hrxq;
1137
1138                 hrxq = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_HRXQ],
1139                               dev_handle->rix_hrxq);
1140                 if (hrxq)
1141                         ind_tbl = hrxq->ind_table;
1142         } else if (dev_handle->fate_action == MLX5_FLOW_FATE_SHARED_RSS) {
1143                 struct mlx5_shared_action_rss *shared_rss;
1144
1145                 shared_rss = mlx5_ipool_get
1146                         (priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
1147                          dev_handle->rix_srss);
1148                 if (shared_rss)
1149                         ind_tbl = shared_rss->ind_tbl;
1150         }
1151         if (!ind_tbl)
1152                 return;
1153         MLX5_ASSERT(dev->data->dev_started);
1154         for (i = 0; i != ind_tbl->queues_n; ++i) {
1155                 int idx = ind_tbl->queues[i];
1156                 struct mlx5_rxq_ctrl *rxq_ctrl =
1157                         container_of((*priv->rxqs)[idx],
1158                                      struct mlx5_rxq_ctrl, rxq);
1159
1160                 if (priv->config.dv_flow_en &&
1161                     priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
1162                     mlx5_flow_ext_mreg_supported(dev)) {
1163                         rxq_ctrl->rxq.mark = 1;
1164                         rxq_ctrl->flow_mark_n = 1;
1165                 } else if (mark) {
1166                         rxq_ctrl->flow_mark_n--;
1167                         rxq_ctrl->rxq.mark = !!rxq_ctrl->flow_mark_n;
1168                 }
1169                 if (tunnel) {
1170                         unsigned int j;
1171
1172                         /* Decrease the counter matching the flow. */
1173                         for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
1174                                 if ((tunnels_info[j].tunnel &
1175                                      dev_handle->layers) ==
1176                                     tunnels_info[j].tunnel) {
1177                                         rxq_ctrl->flow_tunnels_n[j]--;
1178                                         break;
1179                                 }
1180                         }
1181                         flow_rxq_tunnel_ptype_update(rxq_ctrl);
1182                 }
1183         }
1184 }
1185
1186 /**
1187  * Clear the Rx queue flags (Mark/Flag and Tunnel Ptype) associated with the
1188  * @p flow if no other flow uses it with the same kind of request.
1189  *
1190  * @param dev
1191  *   Pointer to Ethernet device.
1192  * @param[in] flow
1193  *   Pointer to the flow.
1194  */
1195 static void
1196 flow_rxq_flags_trim(struct rte_eth_dev *dev, struct rte_flow *flow)
1197 {
1198         struct mlx5_priv *priv = dev->data->dev_private;
1199         uint32_t handle_idx;
1200         struct mlx5_flow_handle *dev_handle;
1201
1202         SILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW], flow->dev_handles,
1203                        handle_idx, dev_handle, next)
1204                 flow_drv_rxq_flags_trim(dev, dev_handle);
1205 }
1206
1207 /**
1208  * Clear the Mark/Flag and Tunnel ptype information in all Rx queues.
1209  *
1210  * @param dev
1211  *   Pointer to Ethernet device.
1212  */
1213 static void
1214 flow_rxq_flags_clear(struct rte_eth_dev *dev)
1215 {
1216         struct mlx5_priv *priv = dev->data->dev_private;
1217         unsigned int i;
1218
1219         for (i = 0; i != priv->rxqs_n; ++i) {
1220                 struct mlx5_rxq_ctrl *rxq_ctrl;
1221                 unsigned int j;
1222
1223                 if (!(*priv->rxqs)[i])
1224                         continue;
1225                 rxq_ctrl = container_of((*priv->rxqs)[i],
1226                                         struct mlx5_rxq_ctrl, rxq);
1227                 rxq_ctrl->flow_mark_n = 0;
1228                 rxq_ctrl->rxq.mark = 0;
1229                 for (j = 0; j != MLX5_FLOW_TUNNEL; ++j)
1230                         rxq_ctrl->flow_tunnels_n[j] = 0;
1231                 rxq_ctrl->rxq.tunnel = 0;
1232         }
1233 }
1234
1235 /**
1236  * Set the Rx queue dynamic metadata (mask and offset) for a flow
1237  *
1238  * @param[in] dev
1239  *   Pointer to the Ethernet device structure.
1240  */
1241 void
1242 mlx5_flow_rxq_dynf_metadata_set(struct rte_eth_dev *dev)
1243 {
1244         struct mlx5_priv *priv = dev->data->dev_private;
1245         struct mlx5_rxq_data *data;
1246         unsigned int i;
1247
1248         for (i = 0; i != priv->rxqs_n; ++i) {
1249                 if (!(*priv->rxqs)[i])
1250                         continue;
1251                 data = (*priv->rxqs)[i];
1252                 if (!rte_flow_dynf_metadata_avail()) {
1253                         data->dynf_meta = 0;
1254                         data->flow_meta_mask = 0;
1255                         data->flow_meta_offset = -1;
1256                         data->flow_meta_port_mask = 0;
1257                 } else {
1258                         data->dynf_meta = 1;
1259                         data->flow_meta_mask = rte_flow_dynf_metadata_mask;
1260                         data->flow_meta_offset = rte_flow_dynf_metadata_offs;
1261                         data->flow_meta_port_mask = (uint32_t)~0;
1262                         if (priv->config.dv_xmeta_en == MLX5_XMETA_MODE_META16)
1263                                 data->flow_meta_port_mask >>= 16;
1264                 }
1265         }
1266 }
1267
1268 /*
1269  * return a pointer to the desired action in the list of actions.
1270  *
1271  * @param[in] actions
1272  *   The list of actions to search the action in.
1273  * @param[in] action
1274  *   The action to find.
1275  *
1276  * @return
1277  *   Pointer to the action in the list, if found. NULL otherwise.
1278  */
1279 const struct rte_flow_action *
1280 mlx5_flow_find_action(const struct rte_flow_action *actions,
1281                       enum rte_flow_action_type action)
1282 {
1283         if (actions == NULL)
1284                 return NULL;
1285         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++)
1286                 if (actions->type == action)
1287                         return actions;
1288         return NULL;
1289 }
1290
1291 /*
1292  * Validate the flag action.
1293  *
1294  * @param[in] action_flags
1295  *   Bit-fields that holds the actions detected until now.
1296  * @param[in] attr
1297  *   Attributes of flow that includes this action.
1298  * @param[out] error
1299  *   Pointer to error structure.
1300  *
1301  * @return
1302  *   0 on success, a negative errno value otherwise and rte_errno is set.
1303  */
1304 int
1305 mlx5_flow_validate_action_flag(uint64_t action_flags,
1306                                const struct rte_flow_attr *attr,
1307                                struct rte_flow_error *error)
1308 {
1309         if (action_flags & MLX5_FLOW_ACTION_MARK)
1310                 return rte_flow_error_set(error, EINVAL,
1311                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1312                                           "can't mark and flag in same flow");
1313         if (action_flags & MLX5_FLOW_ACTION_FLAG)
1314                 return rte_flow_error_set(error, EINVAL,
1315                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1316                                           "can't have 2 flag"
1317                                           " actions in same flow");
1318         if (attr->egress)
1319                 return rte_flow_error_set(error, ENOTSUP,
1320                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1321                                           "flag action not supported for "
1322                                           "egress");
1323         return 0;
1324 }
1325
1326 /*
1327  * Validate the mark action.
1328  *
1329  * @param[in] action
1330  *   Pointer to the queue action.
1331  * @param[in] action_flags
1332  *   Bit-fields that holds the actions detected until now.
1333  * @param[in] attr
1334  *   Attributes of flow that includes this action.
1335  * @param[out] error
1336  *   Pointer to error structure.
1337  *
1338  * @return
1339  *   0 on success, a negative errno value otherwise and rte_errno is set.
1340  */
1341 int
1342 mlx5_flow_validate_action_mark(const struct rte_flow_action *action,
1343                                uint64_t action_flags,
1344                                const struct rte_flow_attr *attr,
1345                                struct rte_flow_error *error)
1346 {
1347         const struct rte_flow_action_mark *mark = action->conf;
1348
1349         if (!mark)
1350                 return rte_flow_error_set(error, EINVAL,
1351                                           RTE_FLOW_ERROR_TYPE_ACTION,
1352                                           action,
1353                                           "configuration cannot be null");
1354         if (mark->id >= MLX5_FLOW_MARK_MAX)
1355                 return rte_flow_error_set(error, EINVAL,
1356                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1357                                           &mark->id,
1358                                           "mark id must in 0 <= id < "
1359                                           RTE_STR(MLX5_FLOW_MARK_MAX));
1360         if (action_flags & MLX5_FLOW_ACTION_FLAG)
1361                 return rte_flow_error_set(error, EINVAL,
1362                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1363                                           "can't flag and mark in same flow");
1364         if (action_flags & MLX5_FLOW_ACTION_MARK)
1365                 return rte_flow_error_set(error, EINVAL,
1366                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1367                                           "can't have 2 mark actions in same"
1368                                           " flow");
1369         if (attr->egress)
1370                 return rte_flow_error_set(error, ENOTSUP,
1371                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1372                                           "mark action not supported for "
1373                                           "egress");
1374         return 0;
1375 }
1376
1377 /*
1378  * Validate the drop action.
1379  *
1380  * @param[in] action_flags
1381  *   Bit-fields that holds the actions detected until now.
1382  * @param[in] attr
1383  *   Attributes of flow that includes this action.
1384  * @param[out] error
1385  *   Pointer to error structure.
1386  *
1387  * @return
1388  *   0 on success, a negative errno value otherwise and rte_errno is set.
1389  */
1390 int
1391 mlx5_flow_validate_action_drop(uint64_t action_flags __rte_unused,
1392                                const struct rte_flow_attr *attr,
1393                                struct rte_flow_error *error)
1394 {
1395         if (attr->egress)
1396                 return rte_flow_error_set(error, ENOTSUP,
1397                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1398                                           "drop action not supported for "
1399                                           "egress");
1400         return 0;
1401 }
1402
1403 /*
1404  * Validate the queue action.
1405  *
1406  * @param[in] action
1407  *   Pointer to the queue action.
1408  * @param[in] action_flags
1409  *   Bit-fields that holds the actions detected until now.
1410  * @param[in] dev
1411  *   Pointer to the Ethernet device structure.
1412  * @param[in] attr
1413  *   Attributes of flow that includes this action.
1414  * @param[out] error
1415  *   Pointer to error structure.
1416  *
1417  * @return
1418  *   0 on success, a negative errno value otherwise and rte_errno is set.
1419  */
1420 int
1421 mlx5_flow_validate_action_queue(const struct rte_flow_action *action,
1422                                 uint64_t action_flags,
1423                                 struct rte_eth_dev *dev,
1424                                 const struct rte_flow_attr *attr,
1425                                 struct rte_flow_error *error)
1426 {
1427         struct mlx5_priv *priv = dev->data->dev_private;
1428         const struct rte_flow_action_queue *queue = action->conf;
1429
1430         if (action_flags & MLX5_FLOW_FATE_ACTIONS)
1431                 return rte_flow_error_set(error, EINVAL,
1432                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1433                                           "can't have 2 fate actions in"
1434                                           " same flow");
1435         if (!priv->rxqs_n)
1436                 return rte_flow_error_set(error, EINVAL,
1437                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1438                                           NULL, "No Rx queues configured");
1439         if (queue->index >= priv->rxqs_n)
1440                 return rte_flow_error_set(error, EINVAL,
1441                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1442                                           &queue->index,
1443                                           "queue index out of range");
1444         if (!(*priv->rxqs)[queue->index])
1445                 return rte_flow_error_set(error, EINVAL,
1446                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1447                                           &queue->index,
1448                                           "queue is not configured");
1449         if (attr->egress)
1450                 return rte_flow_error_set(error, ENOTSUP,
1451                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1452                                           "queue action not supported for "
1453                                           "egress");
1454         return 0;
1455 }
1456
1457 /*
1458  * Validate the rss action.
1459  *
1460  * @param[in] dev
1461  *   Pointer to the Ethernet device structure.
1462  * @param[in] action
1463  *   Pointer to the queue action.
1464  * @param[out] error
1465  *   Pointer to error structure.
1466  *
1467  * @return
1468  *   0 on success, a negative errno value otherwise and rte_errno is set.
1469  */
1470 int
1471 mlx5_validate_action_rss(struct rte_eth_dev *dev,
1472                          const struct rte_flow_action *action,
1473                          struct rte_flow_error *error)
1474 {
1475         struct mlx5_priv *priv = dev->data->dev_private;
1476         const struct rte_flow_action_rss *rss = action->conf;
1477         enum mlx5_rxq_type rxq_type = MLX5_RXQ_TYPE_UNDEFINED;
1478         unsigned int i;
1479
1480         if (rss->func != RTE_ETH_HASH_FUNCTION_DEFAULT &&
1481             rss->func != RTE_ETH_HASH_FUNCTION_TOEPLITZ)
1482                 return rte_flow_error_set(error, ENOTSUP,
1483                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1484                                           &rss->func,
1485                                           "RSS hash function not supported");
1486 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
1487         if (rss->level > 2)
1488 #else
1489         if (rss->level > 1)
1490 #endif
1491                 return rte_flow_error_set(error, ENOTSUP,
1492                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1493                                           &rss->level,
1494                                           "tunnel RSS is not supported");
1495         /* allow RSS key_len 0 in case of NULL (default) RSS key. */
1496         if (rss->key_len == 0 && rss->key != NULL)
1497                 return rte_flow_error_set(error, ENOTSUP,
1498                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1499                                           &rss->key_len,
1500                                           "RSS hash key length 0");
1501         if (rss->key_len > 0 && rss->key_len < MLX5_RSS_HASH_KEY_LEN)
1502                 return rte_flow_error_set(error, ENOTSUP,
1503                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1504                                           &rss->key_len,
1505                                           "RSS hash key too small");
1506         if (rss->key_len > MLX5_RSS_HASH_KEY_LEN)
1507                 return rte_flow_error_set(error, ENOTSUP,
1508                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1509                                           &rss->key_len,
1510                                           "RSS hash key too large");
1511         if (rss->queue_num > priv->config.ind_table_max_size)
1512                 return rte_flow_error_set(error, ENOTSUP,
1513                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1514                                           &rss->queue_num,
1515                                           "number of queues too large");
1516         if (rss->types & MLX5_RSS_HF_MASK)
1517                 return rte_flow_error_set(error, ENOTSUP,
1518                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1519                                           &rss->types,
1520                                           "some RSS protocols are not"
1521                                           " supported");
1522         if ((rss->types & (ETH_RSS_L3_SRC_ONLY | ETH_RSS_L3_DST_ONLY)) &&
1523             !(rss->types & ETH_RSS_IP))
1524                 return rte_flow_error_set(error, EINVAL,
1525                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
1526                                           "L3 partial RSS requested but L3 RSS"
1527                                           " type not specified");
1528         if ((rss->types & (ETH_RSS_L4_SRC_ONLY | ETH_RSS_L4_DST_ONLY)) &&
1529             !(rss->types & (ETH_RSS_UDP | ETH_RSS_TCP)))
1530                 return rte_flow_error_set(error, EINVAL,
1531                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
1532                                           "L4 partial RSS requested but L4 RSS"
1533                                           " type not specified");
1534         if (!priv->rxqs_n)
1535                 return rte_flow_error_set(error, EINVAL,
1536                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1537                                           NULL, "No Rx queues configured");
1538         if (!rss->queue_num)
1539                 return rte_flow_error_set(error, EINVAL,
1540                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1541                                           NULL, "No queues configured");
1542         for (i = 0; i != rss->queue_num; ++i) {
1543                 struct mlx5_rxq_ctrl *rxq_ctrl;
1544
1545                 if (rss->queue[i] >= priv->rxqs_n)
1546                         return rte_flow_error_set
1547                                 (error, EINVAL,
1548                                  RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1549                                  &rss->queue[i], "queue index out of range");
1550                 if (!(*priv->rxqs)[rss->queue[i]])
1551                         return rte_flow_error_set
1552                                 (error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1553                                  &rss->queue[i], "queue is not configured");
1554                 rxq_ctrl = container_of((*priv->rxqs)[rss->queue[i]],
1555                                         struct mlx5_rxq_ctrl, rxq);
1556                 if (i == 0)
1557                         rxq_type = rxq_ctrl->type;
1558                 if (rxq_type != rxq_ctrl->type)
1559                         return rte_flow_error_set
1560                                 (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1561                                  &rss->queue[i],
1562                                  "combining hairpin and regular RSS queues is not supported");
1563         }
1564         return 0;
1565 }
1566
1567 /*
1568  * Validate the rss action.
1569  *
1570  * @param[in] action
1571  *   Pointer to the queue action.
1572  * @param[in] action_flags
1573  *   Bit-fields that holds the actions detected until now.
1574  * @param[in] dev
1575  *   Pointer to the Ethernet device structure.
1576  * @param[in] attr
1577  *   Attributes of flow that includes this action.
1578  * @param[in] item_flags
1579  *   Items that were detected.
1580  * @param[out] error
1581  *   Pointer to error structure.
1582  *
1583  * @return
1584  *   0 on success, a negative errno value otherwise and rte_errno is set.
1585  */
1586 int
1587 mlx5_flow_validate_action_rss(const struct rte_flow_action *action,
1588                               uint64_t action_flags,
1589                               struct rte_eth_dev *dev,
1590                               const struct rte_flow_attr *attr,
1591                               uint64_t item_flags,
1592                               struct rte_flow_error *error)
1593 {
1594         const struct rte_flow_action_rss *rss = action->conf;
1595         int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1596         int ret;
1597
1598         if (action_flags & MLX5_FLOW_FATE_ACTIONS)
1599                 return rte_flow_error_set(error, EINVAL,
1600                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1601                                           "can't have 2 fate actions"
1602                                           " in same flow");
1603         ret = mlx5_validate_action_rss(dev, action, error);
1604         if (ret)
1605                 return ret;
1606         if (attr->egress)
1607                 return rte_flow_error_set(error, ENOTSUP,
1608                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1609                                           "rss action not supported for "
1610                                           "egress");
1611         if (rss->level > 1 && !tunnel)
1612                 return rte_flow_error_set(error, EINVAL,
1613                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
1614                                           "inner RSS is not supported for "
1615                                           "non-tunnel flows");
1616         if ((item_flags & MLX5_FLOW_LAYER_ECPRI) &&
1617             !(item_flags & MLX5_FLOW_LAYER_INNER_L4_UDP)) {
1618                 return rte_flow_error_set(error, EINVAL,
1619                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
1620                                           "RSS on eCPRI is not supported now");
1621         }
1622         return 0;
1623 }
1624
1625 /*
1626  * Validate the default miss action.
1627  *
1628  * @param[in] action_flags
1629  *   Bit-fields that holds the actions detected until now.
1630  * @param[out] error
1631  *   Pointer to error structure.
1632  *
1633  * @return
1634  *   0 on success, a negative errno value otherwise and rte_errno is set.
1635  */
1636 int
1637 mlx5_flow_validate_action_default_miss(uint64_t action_flags,
1638                                 const struct rte_flow_attr *attr,
1639                                 struct rte_flow_error *error)
1640 {
1641         if (action_flags & MLX5_FLOW_FATE_ACTIONS)
1642                 return rte_flow_error_set(error, EINVAL,
1643                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1644                                           "can't have 2 fate actions in"
1645                                           " same flow");
1646         if (attr->egress)
1647                 return rte_flow_error_set(error, ENOTSUP,
1648                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1649                                           "default miss action not supported "
1650                                           "for egress");
1651         if (attr->group)
1652                 return rte_flow_error_set(error, ENOTSUP,
1653                                           RTE_FLOW_ERROR_TYPE_ATTR_GROUP, NULL,
1654                                           "only group 0 is supported");
1655         if (attr->transfer)
1656                 return rte_flow_error_set(error, ENOTSUP,
1657                                           RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
1658                                           NULL, "transfer is not supported");
1659         return 0;
1660 }
1661
1662 /*
1663  * Validate the count action.
1664  *
1665  * @param[in] dev
1666  *   Pointer to the Ethernet device structure.
1667  * @param[in] attr
1668  *   Attributes of flow that includes this action.
1669  * @param[out] error
1670  *   Pointer to error structure.
1671  *
1672  * @return
1673  *   0 on success, a negative errno value otherwise and rte_errno is set.
1674  */
1675 int
1676 mlx5_flow_validate_action_count(struct rte_eth_dev *dev __rte_unused,
1677                                 const struct rte_flow_attr *attr,
1678                                 struct rte_flow_error *error)
1679 {
1680         if (attr->egress)
1681                 return rte_flow_error_set(error, ENOTSUP,
1682                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1683                                           "count action not supported for "
1684                                           "egress");
1685         return 0;
1686 }
1687
1688 /**
1689  * Verify the @p attributes will be correctly understood by the NIC and store
1690  * them in the @p flow if everything is correct.
1691  *
1692  * @param[in] dev
1693  *   Pointer to the Ethernet device structure.
1694  * @param[in] attributes
1695  *   Pointer to flow attributes
1696  * @param[out] error
1697  *   Pointer to error structure.
1698  *
1699  * @return
1700  *   0 on success, a negative errno value otherwise and rte_errno is set.
1701  */
1702 int
1703 mlx5_flow_validate_attributes(struct rte_eth_dev *dev,
1704                               const struct rte_flow_attr *attributes,
1705                               struct rte_flow_error *error)
1706 {
1707         struct mlx5_priv *priv = dev->data->dev_private;
1708         uint32_t priority_max = priv->config.flow_prio - 1;
1709
1710         if (attributes->group)
1711                 return rte_flow_error_set(error, ENOTSUP,
1712                                           RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
1713                                           NULL, "groups is not supported");
1714         if (attributes->priority != MLX5_FLOW_LOWEST_PRIO_INDICATOR &&
1715             attributes->priority >= priority_max)
1716                 return rte_flow_error_set(error, ENOTSUP,
1717                                           RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
1718                                           NULL, "priority out of range");
1719         if (attributes->egress)
1720                 return rte_flow_error_set(error, ENOTSUP,
1721                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1722                                           "egress is not supported");
1723         if (attributes->transfer && !priv->config.dv_esw_en)
1724                 return rte_flow_error_set(error, ENOTSUP,
1725                                           RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
1726                                           NULL, "transfer is not supported");
1727         if (!attributes->ingress)
1728                 return rte_flow_error_set(error, EINVAL,
1729                                           RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
1730                                           NULL,
1731                                           "ingress attribute is mandatory");
1732         return 0;
1733 }
1734
1735 /**
1736  * Validate ICMP6 item.
1737  *
1738  * @param[in] item
1739  *   Item specification.
1740  * @param[in] item_flags
1741  *   Bit-fields that holds the items detected until now.
1742  * @param[in] ext_vlan_sup
1743  *   Whether extended VLAN features are supported or not.
1744  * @param[out] error
1745  *   Pointer to error structure.
1746  *
1747  * @return
1748  *   0 on success, a negative errno value otherwise and rte_errno is set.
1749  */
1750 int
1751 mlx5_flow_validate_item_icmp6(const struct rte_flow_item *item,
1752                                uint64_t item_flags,
1753                                uint8_t target_protocol,
1754                                struct rte_flow_error *error)
1755 {
1756         const struct rte_flow_item_icmp6 *mask = item->mask;
1757         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1758         const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
1759                                       MLX5_FLOW_LAYER_OUTER_L3_IPV6;
1760         const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
1761                                       MLX5_FLOW_LAYER_OUTER_L4;
1762         int ret;
1763
1764         if (target_protocol != 0xFF && target_protocol != IPPROTO_ICMPV6)
1765                 return rte_flow_error_set(error, EINVAL,
1766                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1767                                           "protocol filtering not compatible"
1768                                           " with ICMP6 layer");
1769         if (!(item_flags & l3m))
1770                 return rte_flow_error_set(error, EINVAL,
1771                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1772                                           "IPv6 is mandatory to filter on"
1773                                           " ICMP6");
1774         if (item_flags & l4m)
1775                 return rte_flow_error_set(error, EINVAL,
1776                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1777                                           "multiple L4 layers not supported");
1778         if (!mask)
1779                 mask = &rte_flow_item_icmp6_mask;
1780         ret = mlx5_flow_item_acceptable
1781                 (item, (const uint8_t *)mask,
1782                  (const uint8_t *)&rte_flow_item_icmp6_mask,
1783                  sizeof(struct rte_flow_item_icmp6),
1784                  MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
1785         if (ret < 0)
1786                 return ret;
1787         return 0;
1788 }
1789
1790 /**
1791  * Validate ICMP item.
1792  *
1793  * @param[in] item
1794  *   Item specification.
1795  * @param[in] item_flags
1796  *   Bit-fields that holds the items detected until now.
1797  * @param[out] error
1798  *   Pointer to error structure.
1799  *
1800  * @return
1801  *   0 on success, a negative errno value otherwise and rte_errno is set.
1802  */
1803 int
1804 mlx5_flow_validate_item_icmp(const struct rte_flow_item *item,
1805                              uint64_t item_flags,
1806                              uint8_t target_protocol,
1807                              struct rte_flow_error *error)
1808 {
1809         const struct rte_flow_item_icmp *mask = item->mask;
1810         const struct rte_flow_item_icmp nic_mask = {
1811                 .hdr.icmp_type = 0xff,
1812                 .hdr.icmp_code = 0xff,
1813                 .hdr.icmp_ident = RTE_BE16(0xffff),
1814                 .hdr.icmp_seq_nb = RTE_BE16(0xffff),
1815         };
1816         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1817         const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
1818                                       MLX5_FLOW_LAYER_OUTER_L3_IPV4;
1819         const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
1820                                       MLX5_FLOW_LAYER_OUTER_L4;
1821         int ret;
1822
1823         if (target_protocol != 0xFF && target_protocol != IPPROTO_ICMP)
1824                 return rte_flow_error_set(error, EINVAL,
1825                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1826                                           "protocol filtering not compatible"
1827                                           " with ICMP layer");
1828         if (!(item_flags & l3m))
1829                 return rte_flow_error_set(error, EINVAL,
1830                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1831                                           "IPv4 is mandatory to filter"
1832                                           " on ICMP");
1833         if (item_flags & l4m)
1834                 return rte_flow_error_set(error, EINVAL,
1835                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1836                                           "multiple L4 layers not supported");
1837         if (!mask)
1838                 mask = &nic_mask;
1839         ret = mlx5_flow_item_acceptable
1840                 (item, (const uint8_t *)mask,
1841                  (const uint8_t *)&nic_mask,
1842                  sizeof(struct rte_flow_item_icmp),
1843                  MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
1844         if (ret < 0)
1845                 return ret;
1846         return 0;
1847 }
1848
1849 /**
1850  * Validate Ethernet item.
1851  *
1852  * @param[in] item
1853  *   Item specification.
1854  * @param[in] item_flags
1855  *   Bit-fields that holds the items detected until now.
1856  * @param[out] error
1857  *   Pointer to error structure.
1858  *
1859  * @return
1860  *   0 on success, a negative errno value otherwise and rte_errno is set.
1861  */
1862 int
1863 mlx5_flow_validate_item_eth(const struct rte_flow_item *item,
1864                             uint64_t item_flags, bool ext_vlan_sup,
1865                             struct rte_flow_error *error)
1866 {
1867         const struct rte_flow_item_eth *mask = item->mask;
1868         const struct rte_flow_item_eth nic_mask = {
1869                 .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
1870                 .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
1871                 .type = RTE_BE16(0xffff),
1872                 .has_vlan = ext_vlan_sup ? 1 : 0,
1873         };
1874         int ret;
1875         int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1876         const uint64_t ethm = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
1877                                        MLX5_FLOW_LAYER_OUTER_L2;
1878
1879         if (item_flags & ethm)
1880                 return rte_flow_error_set(error, ENOTSUP,
1881                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1882                                           "multiple L2 layers not supported");
1883         if ((!tunnel && (item_flags & MLX5_FLOW_LAYER_OUTER_L3)) ||
1884             (tunnel && (item_flags & MLX5_FLOW_LAYER_INNER_L3)))
1885                 return rte_flow_error_set(error, EINVAL,
1886                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1887                                           "L2 layer should not follow "
1888                                           "L3 layers");
1889         if ((!tunnel && (item_flags & MLX5_FLOW_LAYER_OUTER_VLAN)) ||
1890             (tunnel && (item_flags & MLX5_FLOW_LAYER_INNER_VLAN)))
1891                 return rte_flow_error_set(error, EINVAL,
1892                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1893                                           "L2 layer should not follow VLAN");
1894         if (!mask)
1895                 mask = &rte_flow_item_eth_mask;
1896         ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
1897                                         (const uint8_t *)&nic_mask,
1898                                         sizeof(struct rte_flow_item_eth),
1899                                         MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
1900         return ret;
1901 }
1902
1903 /**
1904  * Validate VLAN item.
1905  *
1906  * @param[in] item
1907  *   Item specification.
1908  * @param[in] item_flags
1909  *   Bit-fields that holds the items detected until now.
1910  * @param[in] dev
1911  *   Ethernet device flow is being created on.
1912  * @param[out] error
1913  *   Pointer to error structure.
1914  *
1915  * @return
1916  *   0 on success, a negative errno value otherwise and rte_errno is set.
1917  */
1918 int
1919 mlx5_flow_validate_item_vlan(const struct rte_flow_item *item,
1920                              uint64_t item_flags,
1921                              struct rte_eth_dev *dev,
1922                              struct rte_flow_error *error)
1923 {
1924         const struct rte_flow_item_vlan *spec = item->spec;
1925         const struct rte_flow_item_vlan *mask = item->mask;
1926         const struct rte_flow_item_vlan nic_mask = {
1927                 .tci = RTE_BE16(UINT16_MAX),
1928                 .inner_type = RTE_BE16(UINT16_MAX),
1929         };
1930         uint16_t vlan_tag = 0;
1931         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1932         int ret;
1933         const uint64_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
1934                                         MLX5_FLOW_LAYER_INNER_L4) :
1935                                        (MLX5_FLOW_LAYER_OUTER_L3 |
1936                                         MLX5_FLOW_LAYER_OUTER_L4);
1937         const uint64_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
1938                                         MLX5_FLOW_LAYER_OUTER_VLAN;
1939
1940         if (item_flags & vlanm)
1941                 return rte_flow_error_set(error, EINVAL,
1942                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1943                                           "multiple VLAN layers not supported");
1944         else if ((item_flags & l34m) != 0)
1945                 return rte_flow_error_set(error, EINVAL,
1946                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1947                                           "VLAN cannot follow L3/L4 layer");
1948         if (!mask)
1949                 mask = &rte_flow_item_vlan_mask;
1950         ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
1951                                         (const uint8_t *)&nic_mask,
1952                                         sizeof(struct rte_flow_item_vlan),
1953                                         MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
1954         if (ret)
1955                 return ret;
1956         if (!tunnel && mask->tci != RTE_BE16(0x0fff)) {
1957                 struct mlx5_priv *priv = dev->data->dev_private;
1958
1959                 if (priv->vmwa_context) {
1960                         /*
1961                          * Non-NULL context means we have a virtual machine
1962                          * and SR-IOV enabled, we have to create VLAN interface
1963                          * to make hypervisor to setup E-Switch vport
1964                          * context correctly. We avoid creating the multiple
1965                          * VLAN interfaces, so we cannot support VLAN tag mask.
1966                          */
1967                         return rte_flow_error_set(error, EINVAL,
1968                                                   RTE_FLOW_ERROR_TYPE_ITEM,
1969                                                   item,
1970                                                   "VLAN tag mask is not"
1971                                                   " supported in virtual"
1972                                                   " environment");
1973                 }
1974         }
1975         if (spec) {
1976                 vlan_tag = spec->tci;
1977                 vlan_tag &= mask->tci;
1978         }
1979         /*
1980          * From verbs perspective an empty VLAN is equivalent
1981          * to a packet without VLAN layer.
1982          */
1983         if (!vlan_tag)
1984                 return rte_flow_error_set(error, EINVAL,
1985                                           RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
1986                                           item->spec,
1987                                           "VLAN cannot be empty");
1988         return 0;
1989 }
1990
1991 /**
1992  * Validate IPV4 item.
1993  *
1994  * @param[in] item
1995  *   Item specification.
1996  * @param[in] item_flags
1997  *   Bit-fields that holds the items detected until now.
1998  * @param[in] last_item
1999  *   Previous validated item in the pattern items.
2000  * @param[in] ether_type
2001  *   Type in the ethernet layer header (including dot1q).
2002  * @param[in] acc_mask
2003  *   Acceptable mask, if NULL default internal default mask
2004  *   will be used to check whether item fields are supported.
2005  * @param[in] range_accepted
2006  *   True if range of values is accepted for specific fields, false otherwise.
2007  * @param[out] error
2008  *   Pointer to error structure.
2009  *
2010  * @return
2011  *   0 on success, a negative errno value otherwise and rte_errno is set.
2012  */
2013 int
2014 mlx5_flow_validate_item_ipv4(const struct rte_flow_item *item,
2015                              uint64_t item_flags,
2016                              uint64_t last_item,
2017                              uint16_t ether_type,
2018                              const struct rte_flow_item_ipv4 *acc_mask,
2019                              bool range_accepted,
2020                              struct rte_flow_error *error)
2021 {
2022         const struct rte_flow_item_ipv4 *mask = item->mask;
2023         const struct rte_flow_item_ipv4 *spec = item->spec;
2024         const struct rte_flow_item_ipv4 nic_mask = {
2025                 .hdr = {
2026                         .src_addr = RTE_BE32(0xffffffff),
2027                         .dst_addr = RTE_BE32(0xffffffff),
2028                         .type_of_service = 0xff,
2029                         .next_proto_id = 0xff,
2030                 },
2031         };
2032         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
2033         const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
2034                                       MLX5_FLOW_LAYER_OUTER_L3;
2035         const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
2036                                       MLX5_FLOW_LAYER_OUTER_L4;
2037         int ret;
2038         uint8_t next_proto = 0xFF;
2039         const uint64_t l2_vlan = (MLX5_FLOW_LAYER_L2 |
2040                                   MLX5_FLOW_LAYER_OUTER_VLAN |
2041                                   MLX5_FLOW_LAYER_INNER_VLAN);
2042
2043         if ((last_item & l2_vlan) && ether_type &&
2044             ether_type != RTE_ETHER_TYPE_IPV4)
2045                 return rte_flow_error_set(error, EINVAL,
2046                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2047                                           "IPv4 cannot follow L2/VLAN layer "
2048                                           "which ether type is not IPv4");
2049         if (item_flags & MLX5_FLOW_LAYER_IPIP) {
2050                 if (mask && spec)
2051                         next_proto = mask->hdr.next_proto_id &
2052                                      spec->hdr.next_proto_id;
2053                 if (next_proto == IPPROTO_IPIP || next_proto == IPPROTO_IPV6)
2054                         return rte_flow_error_set(error, EINVAL,
2055                                                   RTE_FLOW_ERROR_TYPE_ITEM,
2056                                                   item,
2057                                                   "multiple tunnel "
2058                                                   "not supported");
2059         }
2060         if (item_flags & MLX5_FLOW_LAYER_IPV6_ENCAP)
2061                 return rte_flow_error_set(error, EINVAL,
2062                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2063                                           "wrong tunnel type - IPv6 specified "
2064                                           "but IPv4 item provided");
2065         if (item_flags & l3m)
2066                 return rte_flow_error_set(error, ENOTSUP,
2067                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2068                                           "multiple L3 layers not supported");
2069         else if (item_flags & l4m)
2070                 return rte_flow_error_set(error, EINVAL,
2071                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2072                                           "L3 cannot follow an L4 layer.");
2073         else if ((item_flags & MLX5_FLOW_LAYER_NVGRE) &&
2074                   !(item_flags & MLX5_FLOW_LAYER_INNER_L2))
2075                 return rte_flow_error_set(error, EINVAL,
2076                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2077                                           "L3 cannot follow an NVGRE layer.");
2078         if (!mask)
2079                 mask = &rte_flow_item_ipv4_mask;
2080         else if (mask->hdr.next_proto_id != 0 &&
2081                  mask->hdr.next_proto_id != 0xff)
2082                 return rte_flow_error_set(error, EINVAL,
2083                                           RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
2084                                           "partial mask is not supported"
2085                                           " for protocol");
2086         ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
2087                                         acc_mask ? (const uint8_t *)acc_mask
2088                                                  : (const uint8_t *)&nic_mask,
2089                                         sizeof(struct rte_flow_item_ipv4),
2090                                         range_accepted, error);
2091         if (ret < 0)
2092                 return ret;
2093         return 0;
2094 }
2095
2096 /**
2097  * Validate IPV6 item.
2098  *
2099  * @param[in] item
2100  *   Item specification.
2101  * @param[in] item_flags
2102  *   Bit-fields that holds the items detected until now.
2103  * @param[in] last_item
2104  *   Previous validated item in the pattern items.
2105  * @param[in] ether_type
2106  *   Type in the ethernet layer header (including dot1q).
2107  * @param[in] acc_mask
2108  *   Acceptable mask, if NULL default internal default mask
2109  *   will be used to check whether item fields are supported.
2110  * @param[out] error
2111  *   Pointer to error structure.
2112  *
2113  * @return
2114  *   0 on success, a negative errno value otherwise and rte_errno is set.
2115  */
2116 int
2117 mlx5_flow_validate_item_ipv6(const struct rte_flow_item *item,
2118                              uint64_t item_flags,
2119                              uint64_t last_item,
2120                              uint16_t ether_type,
2121                              const struct rte_flow_item_ipv6 *acc_mask,
2122                              struct rte_flow_error *error)
2123 {
2124         const struct rte_flow_item_ipv6 *mask = item->mask;
2125         const struct rte_flow_item_ipv6 *spec = item->spec;
2126         const struct rte_flow_item_ipv6 nic_mask = {
2127                 .hdr = {
2128                         .src_addr =
2129                                 "\xff\xff\xff\xff\xff\xff\xff\xff"
2130                                 "\xff\xff\xff\xff\xff\xff\xff\xff",
2131                         .dst_addr =
2132                                 "\xff\xff\xff\xff\xff\xff\xff\xff"
2133                                 "\xff\xff\xff\xff\xff\xff\xff\xff",
2134                         .vtc_flow = RTE_BE32(0xffffffff),
2135                         .proto = 0xff,
2136                 },
2137         };
2138         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
2139         const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
2140                                       MLX5_FLOW_LAYER_OUTER_L3;
2141         const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
2142                                       MLX5_FLOW_LAYER_OUTER_L4;
2143         int ret;
2144         uint8_t next_proto = 0xFF;
2145         const uint64_t l2_vlan = (MLX5_FLOW_LAYER_L2 |
2146                                   MLX5_FLOW_LAYER_OUTER_VLAN |
2147                                   MLX5_FLOW_LAYER_INNER_VLAN);
2148
2149         if ((last_item & l2_vlan) && ether_type &&
2150             ether_type != RTE_ETHER_TYPE_IPV6)
2151                 return rte_flow_error_set(error, EINVAL,
2152                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2153                                           "IPv6 cannot follow L2/VLAN layer "
2154                                           "which ether type is not IPv6");
2155         if (mask && mask->hdr.proto == UINT8_MAX && spec)
2156                 next_proto = spec->hdr.proto;
2157         if (item_flags & MLX5_FLOW_LAYER_IPV6_ENCAP) {
2158                 if (next_proto == IPPROTO_IPIP || next_proto == IPPROTO_IPV6)
2159                         return rte_flow_error_set(error, EINVAL,
2160                                                   RTE_FLOW_ERROR_TYPE_ITEM,
2161                                                   item,
2162                                                   "multiple tunnel "
2163                                                   "not supported");
2164         }
2165         if (next_proto == IPPROTO_HOPOPTS  ||
2166             next_proto == IPPROTO_ROUTING  ||
2167             next_proto == IPPROTO_FRAGMENT ||
2168             next_proto == IPPROTO_ESP      ||
2169             next_proto == IPPROTO_AH       ||
2170             next_proto == IPPROTO_DSTOPTS)
2171                 return rte_flow_error_set(error, EINVAL,
2172                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2173                                           "IPv6 proto (next header) should "
2174                                           "not be set as extension header");
2175         if (item_flags & MLX5_FLOW_LAYER_IPIP)
2176                 return rte_flow_error_set(error, EINVAL,
2177                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2178                                           "wrong tunnel type - IPv4 specified "
2179                                           "but IPv6 item provided");
2180         if (item_flags & l3m)
2181                 return rte_flow_error_set(error, ENOTSUP,
2182                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2183                                           "multiple L3 layers not supported");
2184         else if (item_flags & l4m)
2185                 return rte_flow_error_set(error, EINVAL,
2186                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2187                                           "L3 cannot follow an L4 layer.");
2188         else if ((item_flags & MLX5_FLOW_LAYER_NVGRE) &&
2189                   !(item_flags & MLX5_FLOW_LAYER_INNER_L2))
2190                 return rte_flow_error_set(error, EINVAL,
2191                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2192                                           "L3 cannot follow an NVGRE layer.");
2193         if (!mask)
2194                 mask = &rte_flow_item_ipv6_mask;
2195         ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
2196                                         acc_mask ? (const uint8_t *)acc_mask
2197                                                  : (const uint8_t *)&nic_mask,
2198                                         sizeof(struct rte_flow_item_ipv6),
2199                                         MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2200         if (ret < 0)
2201                 return ret;
2202         return 0;
2203 }
2204
2205 /**
2206  * Validate UDP item.
2207  *
2208  * @param[in] item
2209  *   Item specification.
2210  * @param[in] item_flags
2211  *   Bit-fields that holds the items detected until now.
2212  * @param[in] target_protocol
2213  *   The next protocol in the previous item.
2214  * @param[in] flow_mask
2215  *   mlx5 flow-specific (DV, verbs, etc.) supported header fields mask.
2216  * @param[out] error
2217  *   Pointer to error structure.
2218  *
2219  * @return
2220  *   0 on success, a negative errno value otherwise and rte_errno is set.
2221  */
2222 int
2223 mlx5_flow_validate_item_udp(const struct rte_flow_item *item,
2224                             uint64_t item_flags,
2225                             uint8_t target_protocol,
2226                             struct rte_flow_error *error)
2227 {
2228         const struct rte_flow_item_udp *mask = item->mask;
2229         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
2230         const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
2231                                       MLX5_FLOW_LAYER_OUTER_L3;
2232         const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
2233                                       MLX5_FLOW_LAYER_OUTER_L4;
2234         int ret;
2235
2236         if (target_protocol != 0xff && target_protocol != IPPROTO_UDP)
2237                 return rte_flow_error_set(error, EINVAL,
2238                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2239                                           "protocol filtering not compatible"
2240                                           " with UDP layer");
2241         if (!(item_flags & l3m))
2242                 return rte_flow_error_set(error, EINVAL,
2243                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2244                                           "L3 is mandatory to filter on L4");
2245         if (item_flags & l4m)
2246                 return rte_flow_error_set(error, EINVAL,
2247                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2248                                           "multiple L4 layers not supported");
2249         if (!mask)
2250                 mask = &rte_flow_item_udp_mask;
2251         ret = mlx5_flow_item_acceptable
2252                 (item, (const uint8_t *)mask,
2253                  (const uint8_t *)&rte_flow_item_udp_mask,
2254                  sizeof(struct rte_flow_item_udp), MLX5_ITEM_RANGE_NOT_ACCEPTED,
2255                  error);
2256         if (ret < 0)
2257                 return ret;
2258         return 0;
2259 }
2260
2261 /**
2262  * Validate TCP item.
2263  *
2264  * @param[in] item
2265  *   Item specification.
2266  * @param[in] item_flags
2267  *   Bit-fields that holds the items detected until now.
2268  * @param[in] target_protocol
2269  *   The next protocol in the previous item.
2270  * @param[out] error
2271  *   Pointer to error structure.
2272  *
2273  * @return
2274  *   0 on success, a negative errno value otherwise and rte_errno is set.
2275  */
2276 int
2277 mlx5_flow_validate_item_tcp(const struct rte_flow_item *item,
2278                             uint64_t item_flags,
2279                             uint8_t target_protocol,
2280                             const struct rte_flow_item_tcp *flow_mask,
2281                             struct rte_flow_error *error)
2282 {
2283         const struct rte_flow_item_tcp *mask = item->mask;
2284         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
2285         const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
2286                                       MLX5_FLOW_LAYER_OUTER_L3;
2287         const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
2288                                       MLX5_FLOW_LAYER_OUTER_L4;
2289         int ret;
2290
2291         MLX5_ASSERT(flow_mask);
2292         if (target_protocol != 0xff && target_protocol != IPPROTO_TCP)
2293                 return rte_flow_error_set(error, EINVAL,
2294                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2295                                           "protocol filtering not compatible"
2296                                           " with TCP layer");
2297         if (!(item_flags & l3m))
2298                 return rte_flow_error_set(error, EINVAL,
2299                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2300                                           "L3 is mandatory to filter on L4");
2301         if (item_flags & l4m)
2302                 return rte_flow_error_set(error, EINVAL,
2303                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2304                                           "multiple L4 layers not supported");
2305         if (!mask)
2306                 mask = &rte_flow_item_tcp_mask;
2307         ret = mlx5_flow_item_acceptable
2308                 (item, (const uint8_t *)mask,
2309                  (const uint8_t *)flow_mask,
2310                  sizeof(struct rte_flow_item_tcp), MLX5_ITEM_RANGE_NOT_ACCEPTED,
2311                  error);
2312         if (ret < 0)
2313                 return ret;
2314         return 0;
2315 }
2316
2317 /**
2318  * Validate VXLAN item.
2319  *
2320  * @param[in] item
2321  *   Item specification.
2322  * @param[in] item_flags
2323  *   Bit-fields that holds the items detected until now.
2324  * @param[in] target_protocol
2325  *   The next protocol in the previous item.
2326  * @param[out] error
2327  *   Pointer to error structure.
2328  *
2329  * @return
2330  *   0 on success, a negative errno value otherwise and rte_errno is set.
2331  */
2332 int
2333 mlx5_flow_validate_item_vxlan(const struct rte_flow_item *item,
2334                               uint64_t item_flags,
2335                               struct rte_flow_error *error)
2336 {
2337         const struct rte_flow_item_vxlan *spec = item->spec;
2338         const struct rte_flow_item_vxlan *mask = item->mask;
2339         int ret;
2340         union vni {
2341                 uint32_t vlan_id;
2342                 uint8_t vni[4];
2343         } id = { .vlan_id = 0, };
2344
2345
2346         if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2347                 return rte_flow_error_set(error, ENOTSUP,
2348                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2349                                           "multiple tunnel layers not"
2350                                           " supported");
2351         /*
2352          * Verify only UDPv4 is present as defined in
2353          * https://tools.ietf.org/html/rfc7348
2354          */
2355         if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
2356                 return rte_flow_error_set(error, EINVAL,
2357                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2358                                           "no outer UDP layer found");
2359         if (!mask)
2360                 mask = &rte_flow_item_vxlan_mask;
2361         ret = mlx5_flow_item_acceptable
2362                 (item, (const uint8_t *)mask,
2363                  (const uint8_t *)&rte_flow_item_vxlan_mask,
2364                  sizeof(struct rte_flow_item_vxlan),
2365                  MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2366         if (ret < 0)
2367                 return ret;
2368         if (spec) {
2369                 memcpy(&id.vni[1], spec->vni, 3);
2370                 memcpy(&id.vni[1], mask->vni, 3);
2371         }
2372         if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
2373                 return rte_flow_error_set(error, ENOTSUP,
2374                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2375                                           "VXLAN tunnel must be fully defined");
2376         return 0;
2377 }
2378
2379 /**
2380  * Validate VXLAN_GPE item.
2381  *
2382  * @param[in] item
2383  *   Item specification.
2384  * @param[in] item_flags
2385  *   Bit-fields that holds the items detected until now.
2386  * @param[in] priv
2387  *   Pointer to the private data structure.
2388  * @param[in] target_protocol
2389  *   The next protocol in the previous item.
2390  * @param[out] error
2391  *   Pointer to error structure.
2392  *
2393  * @return
2394  *   0 on success, a negative errno value otherwise and rte_errno is set.
2395  */
2396 int
2397 mlx5_flow_validate_item_vxlan_gpe(const struct rte_flow_item *item,
2398                                   uint64_t item_flags,
2399                                   struct rte_eth_dev *dev,
2400                                   struct rte_flow_error *error)
2401 {
2402         struct mlx5_priv *priv = dev->data->dev_private;
2403         const struct rte_flow_item_vxlan_gpe *spec = item->spec;
2404         const struct rte_flow_item_vxlan_gpe *mask = item->mask;
2405         int ret;
2406         union vni {
2407                 uint32_t vlan_id;
2408                 uint8_t vni[4];
2409         } id = { .vlan_id = 0, };
2410
2411         if (!priv->config.l3_vxlan_en)
2412                 return rte_flow_error_set(error, ENOTSUP,
2413                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2414                                           "L3 VXLAN is not enabled by device"
2415                                           " parameter and/or not configured in"
2416                                           " firmware");
2417         if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2418                 return rte_flow_error_set(error, ENOTSUP,
2419                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2420                                           "multiple tunnel layers not"
2421                                           " supported");
2422         /*
2423          * Verify only UDPv4 is present as defined in
2424          * https://tools.ietf.org/html/rfc7348
2425          */
2426         if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
2427                 return rte_flow_error_set(error, EINVAL,
2428                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2429                                           "no outer UDP layer found");
2430         if (!mask)
2431                 mask = &rte_flow_item_vxlan_gpe_mask;
2432         ret = mlx5_flow_item_acceptable
2433                 (item, (const uint8_t *)mask,
2434                  (const uint8_t *)&rte_flow_item_vxlan_gpe_mask,
2435                  sizeof(struct rte_flow_item_vxlan_gpe),
2436                  MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2437         if (ret < 0)
2438                 return ret;
2439         if (spec) {
2440                 if (spec->protocol)
2441                         return rte_flow_error_set(error, ENOTSUP,
2442                                                   RTE_FLOW_ERROR_TYPE_ITEM,
2443                                                   item,
2444                                                   "VxLAN-GPE protocol"
2445                                                   " not supported");
2446                 memcpy(&id.vni[1], spec->vni, 3);
2447                 memcpy(&id.vni[1], mask->vni, 3);
2448         }
2449         if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
2450                 return rte_flow_error_set(error, ENOTSUP,
2451                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2452                                           "VXLAN-GPE tunnel must be fully"
2453                                           " defined");
2454         return 0;
2455 }
2456 /**
2457  * Validate GRE Key item.
2458  *
2459  * @param[in] item
2460  *   Item specification.
2461  * @param[in] item_flags
2462  *   Bit flags to mark detected items.
2463  * @param[in] gre_item
2464  *   Pointer to gre_item
2465  * @param[out] error
2466  *   Pointer to error structure.
2467  *
2468  * @return
2469  *   0 on success, a negative errno value otherwise and rte_errno is set.
2470  */
2471 int
2472 mlx5_flow_validate_item_gre_key(const struct rte_flow_item *item,
2473                                 uint64_t item_flags,
2474                                 const struct rte_flow_item *gre_item,
2475                                 struct rte_flow_error *error)
2476 {
2477         const rte_be32_t *mask = item->mask;
2478         int ret = 0;
2479         rte_be32_t gre_key_default_mask = RTE_BE32(UINT32_MAX);
2480         const struct rte_flow_item_gre *gre_spec;
2481         const struct rte_flow_item_gre *gre_mask;
2482
2483         if (item_flags & MLX5_FLOW_LAYER_GRE_KEY)
2484                 return rte_flow_error_set(error, ENOTSUP,
2485                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2486                                           "Multiple GRE key not support");
2487         if (!(item_flags & MLX5_FLOW_LAYER_GRE))
2488                 return rte_flow_error_set(error, ENOTSUP,
2489                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2490                                           "No preceding GRE header");
2491         if (item_flags & MLX5_FLOW_LAYER_INNER)
2492                 return rte_flow_error_set(error, ENOTSUP,
2493                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2494                                           "GRE key following a wrong item");
2495         gre_mask = gre_item->mask;
2496         if (!gre_mask)
2497                 gre_mask = &rte_flow_item_gre_mask;
2498         gre_spec = gre_item->spec;
2499         if (gre_spec && (gre_mask->c_rsvd0_ver & RTE_BE16(0x2000)) &&
2500                          !(gre_spec->c_rsvd0_ver & RTE_BE16(0x2000)))
2501                 return rte_flow_error_set(error, EINVAL,
2502                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2503                                           "Key bit must be on");
2504
2505         if (!mask)
2506                 mask = &gre_key_default_mask;
2507         ret = mlx5_flow_item_acceptable
2508                 (item, (const uint8_t *)mask,
2509                  (const uint8_t *)&gre_key_default_mask,
2510                  sizeof(rte_be32_t), MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2511         return ret;
2512 }
2513
2514 /**
2515  * Validate GRE item.
2516  *
2517  * @param[in] item
2518  *   Item specification.
2519  * @param[in] item_flags
2520  *   Bit flags to mark detected items.
2521  * @param[in] target_protocol
2522  *   The next protocol in the previous item.
2523  * @param[out] error
2524  *   Pointer to error structure.
2525  *
2526  * @return
2527  *   0 on success, a negative errno value otherwise and rte_errno is set.
2528  */
2529 int
2530 mlx5_flow_validate_item_gre(const struct rte_flow_item *item,
2531                             uint64_t item_flags,
2532                             uint8_t target_protocol,
2533                             struct rte_flow_error *error)
2534 {
2535         const struct rte_flow_item_gre *spec __rte_unused = item->spec;
2536         const struct rte_flow_item_gre *mask = item->mask;
2537         int ret;
2538         const struct rte_flow_item_gre nic_mask = {
2539                 .c_rsvd0_ver = RTE_BE16(0xB000),
2540                 .protocol = RTE_BE16(UINT16_MAX),
2541         };
2542
2543         if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
2544                 return rte_flow_error_set(error, EINVAL,
2545                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2546                                           "protocol filtering not compatible"
2547                                           " with this GRE layer");
2548         if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2549                 return rte_flow_error_set(error, ENOTSUP,
2550                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2551                                           "multiple tunnel layers not"
2552                                           " supported");
2553         if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
2554                 return rte_flow_error_set(error, ENOTSUP,
2555                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2556                                           "L3 Layer is missing");
2557         if (!mask)
2558                 mask = &rte_flow_item_gre_mask;
2559         ret = mlx5_flow_item_acceptable
2560                 (item, (const uint8_t *)mask,
2561                  (const uint8_t *)&nic_mask,
2562                  sizeof(struct rte_flow_item_gre), MLX5_ITEM_RANGE_NOT_ACCEPTED,
2563                  error);
2564         if (ret < 0)
2565                 return ret;
2566 #ifndef HAVE_MLX5DV_DR
2567 #ifndef HAVE_IBV_DEVICE_MPLS_SUPPORT
2568         if (spec && (spec->protocol & mask->protocol))
2569                 return rte_flow_error_set(error, ENOTSUP,
2570                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2571                                           "without MPLS support the"
2572                                           " specification cannot be used for"
2573                                           " filtering");
2574 #endif
2575 #endif
2576         return 0;
2577 }
2578
2579 /**
2580  * Validate Geneve item.
2581  *
2582  * @param[in] item
2583  *   Item specification.
2584  * @param[in] itemFlags
2585  *   Bit-fields that holds the items detected until now.
2586  * @param[in] enPriv
2587  *   Pointer to the private data structure.
2588  * @param[out] error
2589  *   Pointer to error structure.
2590  *
2591  * @return
2592  *   0 on success, a negative errno value otherwise and rte_errno is set.
2593  */
2594
2595 int
2596 mlx5_flow_validate_item_geneve(const struct rte_flow_item *item,
2597                                uint64_t item_flags,
2598                                struct rte_eth_dev *dev,
2599                                struct rte_flow_error *error)
2600 {
2601         struct mlx5_priv *priv = dev->data->dev_private;
2602         const struct rte_flow_item_geneve *spec = item->spec;
2603         const struct rte_flow_item_geneve *mask = item->mask;
2604         int ret;
2605         uint16_t gbhdr;
2606         uint8_t opt_len = priv->config.hca_attr.geneve_max_opt_len ?
2607                           MLX5_GENEVE_OPT_LEN_1 : MLX5_GENEVE_OPT_LEN_0;
2608         const struct rte_flow_item_geneve nic_mask = {
2609                 .ver_opt_len_o_c_rsvd0 = RTE_BE16(0x3f80),
2610                 .vni = "\xff\xff\xff",
2611                 .protocol = RTE_BE16(UINT16_MAX),
2612         };
2613
2614         if (!priv->config.hca_attr.tunnel_stateless_geneve_rx)
2615                 return rte_flow_error_set(error, ENOTSUP,
2616                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2617                                           "L3 Geneve is not enabled by device"
2618                                           " parameter and/or not configured in"
2619                                           " firmware");
2620         if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2621                 return rte_flow_error_set(error, ENOTSUP,
2622                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2623                                           "multiple tunnel layers not"
2624                                           " supported");
2625         /*
2626          * Verify only UDPv4 is present as defined in
2627          * https://tools.ietf.org/html/rfc7348
2628          */
2629         if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
2630                 return rte_flow_error_set(error, EINVAL,
2631                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2632                                           "no outer UDP layer found");
2633         if (!mask)
2634                 mask = &rte_flow_item_geneve_mask;
2635         ret = mlx5_flow_item_acceptable
2636                                   (item, (const uint8_t *)mask,
2637                                    (const uint8_t *)&nic_mask,
2638                                    sizeof(struct rte_flow_item_geneve),
2639                                    MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2640         if (ret)
2641                 return ret;
2642         if (spec) {
2643                 gbhdr = rte_be_to_cpu_16(spec->ver_opt_len_o_c_rsvd0);
2644                 if (MLX5_GENEVE_VER_VAL(gbhdr) ||
2645                      MLX5_GENEVE_CRITO_VAL(gbhdr) ||
2646                      MLX5_GENEVE_RSVD_VAL(gbhdr) || spec->rsvd1)
2647                         return rte_flow_error_set(error, ENOTSUP,
2648                                                   RTE_FLOW_ERROR_TYPE_ITEM,
2649                                                   item,
2650                                                   "Geneve protocol unsupported"
2651                                                   " fields are being used");
2652                 if (MLX5_GENEVE_OPTLEN_VAL(gbhdr) > opt_len)
2653                         return rte_flow_error_set
2654                                         (error, ENOTSUP,
2655                                          RTE_FLOW_ERROR_TYPE_ITEM,
2656                                          item,
2657                                          "Unsupported Geneve options length");
2658         }
2659         if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
2660                 return rte_flow_error_set
2661                                     (error, ENOTSUP,
2662                                      RTE_FLOW_ERROR_TYPE_ITEM, item,
2663                                      "Geneve tunnel must be fully defined");
2664         return 0;
2665 }
2666
2667 /**
2668  * Validate Geneve TLV option item.
2669  *
2670  * @param[in] item
2671  *   Item specification.
2672  * @param[in] last_item
2673  *   Previous validated item in the pattern items.
2674  * @param[in] geneve_item
2675  *   Previous GENEVE item specification.
2676  * @param[in] dev
2677  *   Pointer to the rte_eth_dev structure.
2678  * @param[out] error
2679  *   Pointer to error structure.
2680  *
2681  * @return
2682  *   0 on success, a negative errno value otherwise and rte_errno is set.
2683  */
2684 int
2685 mlx5_flow_validate_item_geneve_opt(const struct rte_flow_item *item,
2686                                    uint64_t last_item,
2687                                    const struct rte_flow_item *geneve_item,
2688                                    struct rte_eth_dev *dev,
2689                                    struct rte_flow_error *error)
2690 {
2691         struct mlx5_priv *priv = dev->data->dev_private;
2692         struct mlx5_dev_ctx_shared *sh = priv->sh;
2693         struct mlx5_geneve_tlv_option_resource *geneve_opt_resource;
2694         struct mlx5_hca_attr *hca_attr = &priv->config.hca_attr;
2695         uint8_t data_max_supported =
2696                         hca_attr->max_geneve_tlv_option_data_len * 4;
2697         struct mlx5_dev_config *config = &priv->config;
2698         const struct rte_flow_item_geneve *geneve_spec;
2699         const struct rte_flow_item_geneve *geneve_mask;
2700         const struct rte_flow_item_geneve_opt *spec = item->spec;
2701         const struct rte_flow_item_geneve_opt *mask = item->mask;
2702         unsigned int i;
2703         unsigned int data_len;
2704         uint8_t tlv_option_len;
2705         uint16_t optlen_m, optlen_v;
2706         const struct rte_flow_item_geneve_opt full_mask = {
2707                 .option_class = RTE_BE16(0xffff),
2708                 .option_type = 0xff,
2709                 .option_len = 0x1f,
2710         };
2711
2712         if (!mask)
2713                 mask = &rte_flow_item_geneve_opt_mask;
2714         if (!spec)
2715                 return rte_flow_error_set
2716                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2717                         "Geneve TLV opt class/type/length must be specified");
2718         if ((uint32_t)spec->option_len > MLX5_GENEVE_OPTLEN_MASK)
2719                 return rte_flow_error_set
2720                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2721                         "Geneve TLV opt length exceeeds the limit (31)");
2722         /* Check if class type and length masks are full. */
2723         if (full_mask.option_class != mask->option_class ||
2724             full_mask.option_type != mask->option_type ||
2725             full_mask.option_len != (mask->option_len & full_mask.option_len))
2726                 return rte_flow_error_set
2727                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2728                         "Geneve TLV opt class/type/length masks must be full");
2729         /* Check if length is supported */
2730         if ((uint32_t)spec->option_len >
2731                         config->hca_attr.max_geneve_tlv_option_data_len)
2732                 return rte_flow_error_set
2733                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2734                         "Geneve TLV opt length not supported");
2735         if (config->hca_attr.max_geneve_tlv_options > 1)
2736                 DRV_LOG(DEBUG,
2737                         "max_geneve_tlv_options supports more than 1 option");
2738         /* Check GENEVE item preceding. */
2739         if (!geneve_item || !(last_item & MLX5_FLOW_LAYER_GENEVE))
2740                 return rte_flow_error_set
2741                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2742                         "Geneve opt item must be preceded with Geneve item");
2743         geneve_spec = geneve_item->spec;
2744         geneve_mask = geneve_item->mask ? geneve_item->mask :
2745                                           &rte_flow_item_geneve_mask;
2746         /* Check if GENEVE TLV option size doesn't exceed option length */
2747         if (geneve_spec && (geneve_mask->ver_opt_len_o_c_rsvd0 ||
2748                             geneve_spec->ver_opt_len_o_c_rsvd0)) {
2749                 tlv_option_len = spec->option_len & mask->option_len;
2750                 optlen_v = rte_be_to_cpu_16(geneve_spec->ver_opt_len_o_c_rsvd0);
2751                 optlen_v = MLX5_GENEVE_OPTLEN_VAL(optlen_v);
2752                 optlen_m = rte_be_to_cpu_16(geneve_mask->ver_opt_len_o_c_rsvd0);
2753                 optlen_m = MLX5_GENEVE_OPTLEN_VAL(optlen_m);
2754                 if ((optlen_v & optlen_m) <= tlv_option_len)
2755                         return rte_flow_error_set
2756                                 (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2757                                  "GENEVE TLV option length exceeds optlen");
2758         }
2759         /* Check if length is 0 or data is 0. */
2760         if (spec->data == NULL || spec->option_len == 0)
2761                 return rte_flow_error_set
2762                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2763                         "Geneve TLV opt with zero data/length not supported");
2764         /* Check not all data & mask are 0. */
2765         data_len = spec->option_len * 4;
2766         if (mask->data == NULL) {
2767                 for (i = 0; i < data_len; i++)
2768                         if (spec->data[i])
2769                                 break;
2770                 if (i == data_len)
2771                         return rte_flow_error_set(error, ENOTSUP,
2772                                 RTE_FLOW_ERROR_TYPE_ITEM, item,
2773                                 "Can't match on Geneve option data 0");
2774         } else {
2775                 for (i = 0; i < data_len; i++)
2776                         if (spec->data[i] & mask->data[i])
2777                                 break;
2778                 if (i == data_len)
2779                         return rte_flow_error_set(error, ENOTSUP,
2780                                 RTE_FLOW_ERROR_TYPE_ITEM, item,
2781                                 "Can't match on Geneve option data and mask 0");
2782                 /* Check data mask supported. */
2783                 for (i = data_max_supported; i < data_len ; i++)
2784                         if (mask->data[i])
2785                                 return rte_flow_error_set(error, ENOTSUP,
2786                                         RTE_FLOW_ERROR_TYPE_ITEM, item,
2787                                         "Data mask is of unsupported size");
2788         }
2789         /* Check GENEVE option is supported in NIC. */
2790         if (!config->hca_attr.geneve_tlv_opt)
2791                 return rte_flow_error_set
2792                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2793                         "Geneve TLV opt not supported");
2794         /* Check if we already have geneve option with different type/class. */
2795         rte_spinlock_lock(&sh->geneve_tlv_opt_sl);
2796         geneve_opt_resource = sh->geneve_tlv_option_resource;
2797         if (geneve_opt_resource != NULL)
2798                 if (geneve_opt_resource->option_class != spec->option_class ||
2799                     geneve_opt_resource->option_type != spec->option_type ||
2800                     geneve_opt_resource->length != spec->option_len) {
2801                         rte_spinlock_unlock(&sh->geneve_tlv_opt_sl);
2802                         return rte_flow_error_set(error, ENOTSUP,
2803                                 RTE_FLOW_ERROR_TYPE_ITEM, item,
2804                                 "Only one Geneve TLV option supported");
2805                 }
2806         rte_spinlock_unlock(&sh->geneve_tlv_opt_sl);
2807         return 0;
2808 }
2809
2810 /**
2811  * Validate MPLS item.
2812  *
2813  * @param[in] dev
2814  *   Pointer to the rte_eth_dev structure.
2815  * @param[in] item
2816  *   Item specification.
2817  * @param[in] item_flags
2818  *   Bit-fields that holds the items detected until now.
2819  * @param[in] prev_layer
2820  *   The protocol layer indicated in previous item.
2821  * @param[out] error
2822  *   Pointer to error structure.
2823  *
2824  * @return
2825  *   0 on success, a negative errno value otherwise and rte_errno is set.
2826  */
2827 int
2828 mlx5_flow_validate_item_mpls(struct rte_eth_dev *dev __rte_unused,
2829                              const struct rte_flow_item *item __rte_unused,
2830                              uint64_t item_flags __rte_unused,
2831                              uint64_t prev_layer __rte_unused,
2832                              struct rte_flow_error *error)
2833 {
2834 #ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
2835         const struct rte_flow_item_mpls *mask = item->mask;
2836         struct mlx5_priv *priv = dev->data->dev_private;
2837         int ret;
2838
2839         if (!priv->config.mpls_en)
2840                 return rte_flow_error_set(error, ENOTSUP,
2841                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2842                                           "MPLS not supported or"
2843                                           " disabled in firmware"
2844                                           " configuration.");
2845         /* MPLS over IP, UDP, GRE is allowed */
2846         if (!(prev_layer & (MLX5_FLOW_LAYER_OUTER_L3 |
2847                             MLX5_FLOW_LAYER_OUTER_L4_UDP |
2848                             MLX5_FLOW_LAYER_GRE |
2849                             MLX5_FLOW_LAYER_GRE_KEY)))
2850                 return rte_flow_error_set(error, EINVAL,
2851                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2852                                           "protocol filtering not compatible"
2853                                           " with MPLS layer");
2854         /* Multi-tunnel isn't allowed but MPLS over GRE is an exception. */
2855         if ((item_flags & MLX5_FLOW_LAYER_TUNNEL) &&
2856             !(item_flags & MLX5_FLOW_LAYER_GRE))
2857                 return rte_flow_error_set(error, ENOTSUP,
2858                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2859                                           "multiple tunnel layers not"
2860                                           " supported");
2861         if (!mask)
2862                 mask = &rte_flow_item_mpls_mask;
2863         ret = mlx5_flow_item_acceptable
2864                 (item, (const uint8_t *)mask,
2865                  (const uint8_t *)&rte_flow_item_mpls_mask,
2866                  sizeof(struct rte_flow_item_mpls),
2867                  MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2868         if (ret < 0)
2869                 return ret;
2870         return 0;
2871 #else
2872         return rte_flow_error_set(error, ENOTSUP,
2873                                   RTE_FLOW_ERROR_TYPE_ITEM, item,
2874                                   "MPLS is not supported by Verbs, please"
2875                                   " update.");
2876 #endif
2877 }
2878
2879 /**
2880  * Validate NVGRE item.
2881  *
2882  * @param[in] item
2883  *   Item specification.
2884  * @param[in] item_flags
2885  *   Bit flags to mark detected items.
2886  * @param[in] target_protocol
2887  *   The next protocol in the previous item.
2888  * @param[out] error
2889  *   Pointer to error structure.
2890  *
2891  * @return
2892  *   0 on success, a negative errno value otherwise and rte_errno is set.
2893  */
2894 int
2895 mlx5_flow_validate_item_nvgre(const struct rte_flow_item *item,
2896                               uint64_t item_flags,
2897                               uint8_t target_protocol,
2898                               struct rte_flow_error *error)
2899 {
2900         const struct rte_flow_item_nvgre *mask = item->mask;
2901         int ret;
2902
2903         if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
2904                 return rte_flow_error_set(error, EINVAL,
2905                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2906                                           "protocol filtering not compatible"
2907                                           " with this GRE layer");
2908         if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2909                 return rte_flow_error_set(error, ENOTSUP,
2910                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2911                                           "multiple tunnel layers not"
2912                                           " supported");
2913         if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
2914                 return rte_flow_error_set(error, ENOTSUP,
2915                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2916                                           "L3 Layer is missing");
2917         if (!mask)
2918                 mask = &rte_flow_item_nvgre_mask;
2919         ret = mlx5_flow_item_acceptable
2920                 (item, (const uint8_t *)mask,
2921                  (const uint8_t *)&rte_flow_item_nvgre_mask,
2922                  sizeof(struct rte_flow_item_nvgre),
2923                  MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2924         if (ret < 0)
2925                 return ret;
2926         return 0;
2927 }
2928
2929 /**
2930  * Validate eCPRI item.
2931  *
2932  * @param[in] item
2933  *   Item specification.
2934  * @param[in] item_flags
2935  *   Bit-fields that holds the items detected until now.
2936  * @param[in] last_item
2937  *   Previous validated item in the pattern items.
2938  * @param[in] ether_type
2939  *   Type in the ethernet layer header (including dot1q).
2940  * @param[in] acc_mask
2941  *   Acceptable mask, if NULL default internal default mask
2942  *   will be used to check whether item fields are supported.
2943  * @param[out] error
2944  *   Pointer to error structure.
2945  *
2946  * @return
2947  *   0 on success, a negative errno value otherwise and rte_errno is set.
2948  */
2949 int
2950 mlx5_flow_validate_item_ecpri(const struct rte_flow_item *item,
2951                               uint64_t item_flags,
2952                               uint64_t last_item,
2953                               uint16_t ether_type,
2954                               const struct rte_flow_item_ecpri *acc_mask,
2955                               struct rte_flow_error *error)
2956 {
2957         const struct rte_flow_item_ecpri *mask = item->mask;
2958         const struct rte_flow_item_ecpri nic_mask = {
2959                 .hdr = {
2960                         .common = {
2961                                 .u32 =
2962                                 RTE_BE32(((const struct rte_ecpri_common_hdr) {
2963                                         .type = 0xFF,
2964                                         }).u32),
2965                         },
2966                         .dummy[0] = 0xFFFFFFFF,
2967                 },
2968         };
2969         const uint64_t outer_l2_vlan = (MLX5_FLOW_LAYER_OUTER_L2 |
2970                                         MLX5_FLOW_LAYER_OUTER_VLAN);
2971         struct rte_flow_item_ecpri mask_lo;
2972
2973         if (!(last_item & outer_l2_vlan) &&
2974             last_item != MLX5_FLOW_LAYER_OUTER_L4_UDP)
2975                 return rte_flow_error_set(error, EINVAL,
2976                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2977                                           "eCPRI can only follow L2/VLAN layer or UDP layer");
2978         if ((last_item & outer_l2_vlan) && ether_type &&
2979             ether_type != RTE_ETHER_TYPE_ECPRI)
2980                 return rte_flow_error_set(error, EINVAL,
2981                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2982                                           "eCPRI cannot follow L2/VLAN layer which ether type is not 0xAEFE");
2983         if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2984                 return rte_flow_error_set(error, EINVAL,
2985                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2986                                           "eCPRI with tunnel is not supported right now");
2987         if (item_flags & MLX5_FLOW_LAYER_OUTER_L3)
2988                 return rte_flow_error_set(error, ENOTSUP,
2989                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2990                                           "multiple L3 layers not supported");
2991         else if (item_flags & MLX5_FLOW_LAYER_OUTER_L4_TCP)
2992                 return rte_flow_error_set(error, EINVAL,
2993                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2994                                           "eCPRI cannot coexist with a TCP layer");
2995         /* In specification, eCPRI could be over UDP layer. */
2996         else if (item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP)
2997                 return rte_flow_error_set(error, EINVAL,
2998                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2999                                           "eCPRI over UDP layer is not yet supported right now");
3000         /* Mask for type field in common header could be zero. */
3001         if (!mask)
3002                 mask = &rte_flow_item_ecpri_mask;
3003         mask_lo.hdr.common.u32 = rte_be_to_cpu_32(mask->hdr.common.u32);
3004         /* Input mask is in big-endian format. */
3005         if (mask_lo.hdr.common.type != 0 && mask_lo.hdr.common.type != 0xff)
3006                 return rte_flow_error_set(error, EINVAL,
3007                                           RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
3008                                           "partial mask is not supported for protocol");
3009         else if (mask_lo.hdr.common.type == 0 && mask->hdr.dummy[0] != 0)
3010                 return rte_flow_error_set(error, EINVAL,
3011                                           RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
3012                                           "message header mask must be after a type mask");
3013         return mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
3014                                          acc_mask ? (const uint8_t *)acc_mask
3015                                                   : (const uint8_t *)&nic_mask,
3016                                          sizeof(struct rte_flow_item_ecpri),
3017                                          MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
3018 }
3019
3020 /**
3021  * Release resource related QUEUE/RSS action split.
3022  *
3023  * @param dev
3024  *   Pointer to Ethernet device.
3025  * @param flow
3026  *   Flow to release id's from.
3027  */
3028 static void
3029 flow_mreg_split_qrss_release(struct rte_eth_dev *dev,
3030                              struct rte_flow *flow)
3031 {
3032         struct mlx5_priv *priv = dev->data->dev_private;
3033         uint32_t handle_idx;
3034         struct mlx5_flow_handle *dev_handle;
3035
3036         SILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW], flow->dev_handles,
3037                        handle_idx, dev_handle, next)
3038                 if (dev_handle->split_flow_id &&
3039                     !dev_handle->is_meter_flow_id)
3040                         mlx5_ipool_free(priv->sh->ipool
3041                                         [MLX5_IPOOL_RSS_EXPANTION_FLOW_ID],
3042                                         dev_handle->split_flow_id);
3043 }
3044
3045 static int
3046 flow_null_validate(struct rte_eth_dev *dev __rte_unused,
3047                    const struct rte_flow_attr *attr __rte_unused,
3048                    const struct rte_flow_item items[] __rte_unused,
3049                    const struct rte_flow_action actions[] __rte_unused,
3050                    bool external __rte_unused,
3051                    int hairpin __rte_unused,
3052                    struct rte_flow_error *error)
3053 {
3054         return rte_flow_error_set(error, ENOTSUP,
3055                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
3056 }
3057
3058 static struct mlx5_flow *
3059 flow_null_prepare(struct rte_eth_dev *dev __rte_unused,
3060                   const struct rte_flow_attr *attr __rte_unused,
3061                   const struct rte_flow_item items[] __rte_unused,
3062                   const struct rte_flow_action actions[] __rte_unused,
3063                   struct rte_flow_error *error)
3064 {
3065         rte_flow_error_set(error, ENOTSUP,
3066                            RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
3067         return NULL;
3068 }
3069
3070 static int
3071 flow_null_translate(struct rte_eth_dev *dev __rte_unused,
3072                     struct mlx5_flow *dev_flow __rte_unused,
3073                     const struct rte_flow_attr *attr __rte_unused,
3074                     const struct rte_flow_item items[] __rte_unused,
3075                     const struct rte_flow_action actions[] __rte_unused,
3076                     struct rte_flow_error *error)
3077 {
3078         return rte_flow_error_set(error, ENOTSUP,
3079                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
3080 }
3081
3082 static int
3083 flow_null_apply(struct rte_eth_dev *dev __rte_unused,
3084                 struct rte_flow *flow __rte_unused,
3085                 struct rte_flow_error *error)
3086 {
3087         return rte_flow_error_set(error, ENOTSUP,
3088                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
3089 }
3090
3091 static void
3092 flow_null_remove(struct rte_eth_dev *dev __rte_unused,
3093                  struct rte_flow *flow __rte_unused)
3094 {
3095 }
3096
3097 static void
3098 flow_null_destroy(struct rte_eth_dev *dev __rte_unused,
3099                   struct rte_flow *flow __rte_unused)
3100 {
3101 }
3102
3103 static int
3104 flow_null_query(struct rte_eth_dev *dev __rte_unused,
3105                 struct rte_flow *flow __rte_unused,
3106                 const struct rte_flow_action *actions __rte_unused,
3107                 void *data __rte_unused,
3108                 struct rte_flow_error *error)
3109 {
3110         return rte_flow_error_set(error, ENOTSUP,
3111                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
3112 }
3113
3114 static int
3115 flow_null_sync_domain(struct rte_eth_dev *dev __rte_unused,
3116                       uint32_t domains __rte_unused,
3117                       uint32_t flags __rte_unused)
3118 {
3119         return 0;
3120 }
3121
3122 /* Void driver to protect from null pointer reference. */
3123 const struct mlx5_flow_driver_ops mlx5_flow_null_drv_ops = {
3124         .validate = flow_null_validate,
3125         .prepare = flow_null_prepare,
3126         .translate = flow_null_translate,
3127         .apply = flow_null_apply,
3128         .remove = flow_null_remove,
3129         .destroy = flow_null_destroy,
3130         .query = flow_null_query,
3131         .sync_domain = flow_null_sync_domain,
3132 };
3133
3134 /**
3135  * Select flow driver type according to flow attributes and device
3136  * configuration.
3137  *
3138  * @param[in] dev
3139  *   Pointer to the dev structure.
3140  * @param[in] attr
3141  *   Pointer to the flow attributes.
3142  *
3143  * @return
3144  *   flow driver type, MLX5_FLOW_TYPE_MAX otherwise.
3145  */
3146 static enum mlx5_flow_drv_type
3147 flow_get_drv_type(struct rte_eth_dev *dev, const struct rte_flow_attr *attr)
3148 {
3149         struct mlx5_priv *priv = dev->data->dev_private;
3150         /* The OS can determine first a specific flow type (DV, VERBS) */
3151         enum mlx5_flow_drv_type type = mlx5_flow_os_get_type();
3152
3153         if (type != MLX5_FLOW_TYPE_MAX)
3154                 return type;
3155         /* If no OS specific type - continue with DV/VERBS selection */
3156         if (attr->transfer && priv->config.dv_esw_en)
3157                 type = MLX5_FLOW_TYPE_DV;
3158         if (!attr->transfer)
3159                 type = priv->config.dv_flow_en ? MLX5_FLOW_TYPE_DV :
3160                                                  MLX5_FLOW_TYPE_VERBS;
3161         return type;
3162 }
3163
3164 #define flow_get_drv_ops(type) flow_drv_ops[type]
3165
3166 /**
3167  * Flow driver validation API. This abstracts calling driver specific functions.
3168  * The type of flow driver is determined according to flow attributes.
3169  *
3170  * @param[in] dev
3171  *   Pointer to the dev structure.
3172  * @param[in] attr
3173  *   Pointer to the flow attributes.
3174  * @param[in] items
3175  *   Pointer to the list of items.
3176  * @param[in] actions
3177  *   Pointer to the list of actions.
3178  * @param[in] external
3179  *   This flow rule is created by request external to PMD.
3180  * @param[in] hairpin
3181  *   Number of hairpin TX actions, 0 means classic flow.
3182  * @param[out] error
3183  *   Pointer to the error structure.
3184  *
3185  * @return
3186  *   0 on success, a negative errno value otherwise and rte_errno is set.
3187  */
3188 static inline int
3189 flow_drv_validate(struct rte_eth_dev *dev,
3190                   const struct rte_flow_attr *attr,
3191                   const struct rte_flow_item items[],
3192                   const struct rte_flow_action actions[],
3193                   bool external, int hairpin, struct rte_flow_error *error)
3194 {
3195         const struct mlx5_flow_driver_ops *fops;
3196         enum mlx5_flow_drv_type type = flow_get_drv_type(dev, attr);
3197
3198         fops = flow_get_drv_ops(type);
3199         return fops->validate(dev, attr, items, actions, external,
3200                               hairpin, error);
3201 }
3202
3203 /**
3204  * Flow driver preparation API. This abstracts calling driver specific
3205  * functions. Parent flow (rte_flow) should have driver type (drv_type). It
3206  * calculates the size of memory required for device flow, allocates the memory,
3207  * initializes the device flow and returns the pointer.
3208  *
3209  * @note
3210  *   This function initializes device flow structure such as dv or verbs in
3211  *   struct mlx5_flow. However, it is caller's responsibility to initialize the
3212  *   rest. For example, adding returning device flow to flow->dev_flow list and
3213  *   setting backward reference to the flow should be done out of this function.
3214  *   layers field is not filled either.
3215  *
3216  * @param[in] dev
3217  *   Pointer to the dev structure.
3218  * @param[in] attr
3219  *   Pointer to the flow attributes.
3220  * @param[in] items
3221  *   Pointer to the list of items.
3222  * @param[in] actions
3223  *   Pointer to the list of actions.
3224  * @param[in] flow_idx
3225  *   This memory pool index to the flow.
3226  * @param[out] error
3227  *   Pointer to the error structure.
3228  *
3229  * @return
3230  *   Pointer to device flow on success, otherwise NULL and rte_errno is set.
3231  */
3232 static inline struct mlx5_flow *
3233 flow_drv_prepare(struct rte_eth_dev *dev,
3234                  const struct rte_flow *flow,
3235                  const struct rte_flow_attr *attr,
3236                  const struct rte_flow_item items[],
3237                  const struct rte_flow_action actions[],
3238                  uint32_t flow_idx,
3239                  struct rte_flow_error *error)
3240 {
3241         const struct mlx5_flow_driver_ops *fops;
3242         enum mlx5_flow_drv_type type = flow->drv_type;
3243         struct mlx5_flow *mlx5_flow = NULL;
3244
3245         MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
3246         fops = flow_get_drv_ops(type);
3247         mlx5_flow = fops->prepare(dev, attr, items, actions, error);
3248         if (mlx5_flow)
3249                 mlx5_flow->flow_idx = flow_idx;
3250         return mlx5_flow;
3251 }
3252
3253 /**
3254  * Flow driver translation API. This abstracts calling driver specific
3255  * functions. Parent flow (rte_flow) should have driver type (drv_type). It
3256  * translates a generic flow into a driver flow. flow_drv_prepare() must
3257  * precede.
3258  *
3259  * @note
3260  *   dev_flow->layers could be filled as a result of parsing during translation
3261  *   if needed by flow_drv_apply(). dev_flow->flow->actions can also be filled
3262  *   if necessary. As a flow can have multiple dev_flows by RSS flow expansion,
3263  *   flow->actions could be overwritten even though all the expanded dev_flows
3264  *   have the same actions.
3265  *
3266  * @param[in] dev
3267  *   Pointer to the rte dev structure.
3268  * @param[in, out] dev_flow
3269  *   Pointer to the mlx5 flow.
3270  * @param[in] attr
3271  *   Pointer to the flow attributes.
3272  * @param[in] items
3273  *   Pointer to the list of items.
3274  * @param[in] actions
3275  *   Pointer to the list of actions.
3276  * @param[out] error
3277  *   Pointer to the error structure.
3278  *
3279  * @return
3280  *   0 on success, a negative errno value otherwise and rte_errno is set.
3281  */
3282 static inline int
3283 flow_drv_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
3284                    const struct rte_flow_attr *attr,
3285                    const struct rte_flow_item items[],
3286                    const struct rte_flow_action actions[],
3287                    struct rte_flow_error *error)
3288 {
3289         const struct mlx5_flow_driver_ops *fops;
3290         enum mlx5_flow_drv_type type = dev_flow->flow->drv_type;
3291
3292         MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
3293         fops = flow_get_drv_ops(type);
3294         return fops->translate(dev, dev_flow, attr, items, actions, error);
3295 }
3296
3297 /**
3298  * Flow driver apply API. This abstracts calling driver specific functions.
3299  * Parent flow (rte_flow) should have driver type (drv_type). It applies
3300  * translated driver flows on to device. flow_drv_translate() must precede.
3301  *
3302  * @param[in] dev
3303  *   Pointer to Ethernet device structure.
3304  * @param[in, out] flow
3305  *   Pointer to flow structure.
3306  * @param[out] error
3307  *   Pointer to error structure.
3308  *
3309  * @return
3310  *   0 on success, a negative errno value otherwise and rte_errno is set.
3311  */
3312 static inline int
3313 flow_drv_apply(struct rte_eth_dev *dev, struct rte_flow *flow,
3314                struct rte_flow_error *error)
3315 {
3316         const struct mlx5_flow_driver_ops *fops;
3317         enum mlx5_flow_drv_type type = flow->drv_type;
3318
3319         MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
3320         fops = flow_get_drv_ops(type);
3321         return fops->apply(dev, flow, error);
3322 }
3323
3324 /**
3325  * Flow driver destroy API. This abstracts calling driver specific functions.
3326  * Parent flow (rte_flow) should have driver type (drv_type). It removes a flow
3327  * on device and releases resources of the flow.
3328  *
3329  * @param[in] dev
3330  *   Pointer to Ethernet device.
3331  * @param[in, out] flow
3332  *   Pointer to flow structure.
3333  */
3334 static inline void
3335 flow_drv_destroy(struct rte_eth_dev *dev, struct rte_flow *flow)
3336 {
3337         const struct mlx5_flow_driver_ops *fops;
3338         enum mlx5_flow_drv_type type = flow->drv_type;
3339
3340         flow_mreg_split_qrss_release(dev, flow);
3341         MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
3342         fops = flow_get_drv_ops(type);
3343         fops->destroy(dev, flow);
3344 }
3345
3346 /**
3347  * Get RSS action from the action list.
3348  *
3349  * @param[in] actions
3350  *   Pointer to the list of actions.
3351  *
3352  * @return
3353  *   Pointer to the RSS action if exist, else return NULL.
3354  */
3355 static const struct rte_flow_action_rss*
3356 flow_get_rss_action(const struct rte_flow_action actions[])
3357 {
3358         const struct rte_flow_action_rss *rss = NULL;
3359
3360         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
3361                 switch (actions->type) {
3362                 case RTE_FLOW_ACTION_TYPE_RSS:
3363                         rss = actions->conf;
3364                         break;
3365                 case RTE_FLOW_ACTION_TYPE_SAMPLE:
3366                 {
3367                         const struct rte_flow_action_sample *sample =
3368                                                                 actions->conf;
3369                         const struct rte_flow_action *act = sample->actions;
3370                         for (; act->type != RTE_FLOW_ACTION_TYPE_END; act++)
3371                                 if (act->type == RTE_FLOW_ACTION_TYPE_RSS)
3372                                         rss = act->conf;
3373                         break;
3374                 }
3375                 default:
3376                         break;
3377                 }
3378         }
3379         return rss;
3380 }
3381
3382 /**
3383  * Get ASO age action by index.
3384  *
3385  * @param[in] dev
3386  *   Pointer to the Ethernet device structure.
3387  * @param[in] age_idx
3388  *   Index to the ASO age action.
3389  *
3390  * @return
3391  *   The specified ASO age action.
3392  */
3393 struct mlx5_aso_age_action*
3394 flow_aso_age_get_by_idx(struct rte_eth_dev *dev, uint32_t age_idx)
3395 {
3396         uint16_t pool_idx = age_idx & UINT16_MAX;
3397         uint16_t offset = (age_idx >> 16) & UINT16_MAX;
3398         struct mlx5_priv *priv = dev->data->dev_private;
3399         struct mlx5_aso_age_mng *mng = priv->sh->aso_age_mng;
3400         struct mlx5_aso_age_pool *pool = mng->pools[pool_idx];
3401
3402         return &pool->actions[offset - 1];
3403 }
3404
3405 /* maps indirect action to translated direct in some actions array */
3406 struct mlx5_translated_action_handle {
3407         struct rte_flow_action_handle *action; /**< Indirect action handle. */
3408         int index; /**< Index in related array of rte_flow_action. */
3409 };
3410
3411 /**
3412  * Translates actions of type RTE_FLOW_ACTION_TYPE_INDIRECT to related
3413  * direct action if translation possible.
3414  * This functionality used to run same execution path for both direct and
3415  * indirect actions on flow create. All necessary preparations for indirect
3416  * action handling should be performed on *handle* actions list returned
3417  * from this call.
3418  *
3419  * @param[in] dev
3420  *   Pointer to Ethernet device.
3421  * @param[in] actions
3422  *   List of actions to translate.
3423  * @param[out] handle
3424  *   List to store translated indirect action object handles.
3425  * @param[in, out] indir_n
3426  *   Size of *handle* array. On return should be updated with number of
3427  *   indirect actions retrieved from the *actions* list.
3428  * @param[out] translated_actions
3429  *   List of actions where all indirect actions were translated to direct
3430  *   if possible. NULL if no translation took place.
3431  * @param[out] error
3432  *   Pointer to the error structure.
3433  *
3434  * @return
3435  *   0 on success, a negative errno value otherwise and rte_errno is set.
3436  */
3437 static int
3438 flow_action_handles_translate(struct rte_eth_dev *dev,
3439                               const struct rte_flow_action actions[],
3440                               struct mlx5_translated_action_handle *handle,
3441                               int *indir_n,
3442                               struct rte_flow_action **translated_actions,
3443                               struct rte_flow_error *error)
3444 {
3445         struct mlx5_priv *priv = dev->data->dev_private;
3446         struct rte_flow_action *translated = NULL;
3447         size_t actions_size;
3448         int n;
3449         int copied_n = 0;
3450         struct mlx5_translated_action_handle *handle_end = NULL;
3451
3452         for (n = 0; actions[n].type != RTE_FLOW_ACTION_TYPE_END; n++) {
3453                 if (actions[n].type != RTE_FLOW_ACTION_TYPE_INDIRECT)
3454                         continue;
3455                 if (copied_n == *indir_n) {
3456                         return rte_flow_error_set
3457                                 (error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION_NUM,
3458                                  NULL, "too many shared actions");
3459                 }
3460                 rte_memcpy(&handle[copied_n].action, &actions[n].conf,
3461                            sizeof(actions[n].conf));
3462                 handle[copied_n].index = n;
3463                 copied_n++;
3464         }
3465         n++;
3466         *indir_n = copied_n;
3467         if (!copied_n)
3468                 return 0;
3469         actions_size = sizeof(struct rte_flow_action) * n;
3470         translated = mlx5_malloc(MLX5_MEM_ZERO, actions_size, 0, SOCKET_ID_ANY);
3471         if (!translated) {
3472                 rte_errno = ENOMEM;
3473                 return -ENOMEM;
3474         }
3475         memcpy(translated, actions, actions_size);
3476         for (handle_end = handle + copied_n; handle < handle_end; handle++) {
3477                 struct mlx5_shared_action_rss *shared_rss;
3478                 uint32_t act_idx = (uint32_t)(uintptr_t)handle->action;
3479                 uint32_t type = act_idx >> MLX5_INDIRECT_ACTION_TYPE_OFFSET;
3480                 uint32_t idx = act_idx &
3481                                ((1u << MLX5_INDIRECT_ACTION_TYPE_OFFSET) - 1);
3482
3483                 switch (type) {
3484                 case MLX5_INDIRECT_ACTION_TYPE_RSS:
3485                         shared_rss = mlx5_ipool_get
3486                           (priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS], idx);
3487                         translated[handle->index].type =
3488                                 RTE_FLOW_ACTION_TYPE_RSS;
3489                         translated[handle->index].conf =
3490                                 &shared_rss->origin;
3491                         break;
3492                 case MLX5_INDIRECT_ACTION_TYPE_AGE:
3493                         if (priv->sh->flow_hit_aso_en) {
3494                                 translated[handle->index].type =
3495                                         (enum rte_flow_action_type)
3496                                         MLX5_RTE_FLOW_ACTION_TYPE_AGE;
3497                                 translated[handle->index].conf =
3498                                                          (void *)(uintptr_t)idx;
3499                                 break;
3500                         }
3501                         /* Fall-through */
3502                 default:
3503                         mlx5_free(translated);
3504                         return rte_flow_error_set
3505                                 (error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
3506                                  NULL, "invalid indirect action type");
3507                 }
3508         }
3509         *translated_actions = translated;
3510         return 0;
3511 }
3512
3513 /**
3514  * Get Shared RSS action from the action list.
3515  *
3516  * @param[in] dev
3517  *   Pointer to Ethernet device.
3518  * @param[in] shared
3519  *   Pointer to the list of actions.
3520  * @param[in] shared_n
3521  *   Actions list length.
3522  *
3523  * @return
3524  *   The MLX5 RSS action ID if exists, otherwise return 0.
3525  */
3526 static uint32_t
3527 flow_get_shared_rss_action(struct rte_eth_dev *dev,
3528                            struct mlx5_translated_action_handle *handle,
3529                            int shared_n)
3530 {
3531         struct mlx5_translated_action_handle *handle_end;
3532         struct mlx5_priv *priv = dev->data->dev_private;
3533         struct mlx5_shared_action_rss *shared_rss;
3534
3535
3536         for (handle_end = handle + shared_n; handle < handle_end; handle++) {
3537                 uint32_t act_idx = (uint32_t)(uintptr_t)handle->action;
3538                 uint32_t type = act_idx >> MLX5_INDIRECT_ACTION_TYPE_OFFSET;
3539                 uint32_t idx = act_idx &
3540                                ((1u << MLX5_INDIRECT_ACTION_TYPE_OFFSET) - 1);
3541                 switch (type) {
3542                 case MLX5_INDIRECT_ACTION_TYPE_RSS:
3543                         shared_rss = mlx5_ipool_get
3544                                 (priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
3545                                                                            idx);
3546                         __atomic_add_fetch(&shared_rss->refcnt, 1,
3547                                            __ATOMIC_RELAXED);
3548                         return idx;
3549                 default:
3550                         break;
3551                 }
3552         }
3553         return 0;
3554 }
3555
3556 static unsigned int
3557 find_graph_root(const struct rte_flow_item pattern[], uint32_t rss_level)
3558 {
3559         const struct rte_flow_item *item;
3560         unsigned int has_vlan = 0;
3561
3562         for (item = pattern; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
3563                 if (item->type == RTE_FLOW_ITEM_TYPE_VLAN) {
3564                         has_vlan = 1;
3565                         break;
3566                 }
3567         }
3568         if (has_vlan)
3569                 return rss_level < 2 ? MLX5_EXPANSION_ROOT_ETH_VLAN :
3570                                        MLX5_EXPANSION_ROOT_OUTER_ETH_VLAN;
3571         return rss_level < 2 ? MLX5_EXPANSION_ROOT :
3572                                MLX5_EXPANSION_ROOT_OUTER;
3573 }
3574
3575 /**
3576  *  Get layer flags from the prefix flow.
3577  *
3578  *  Some flows may be split to several subflows, the prefix subflow gets the
3579  *  match items and the suffix sub flow gets the actions.
3580  *  Some actions need the user defined match item flags to get the detail for
3581  *  the action.
3582  *  This function helps the suffix flow to get the item layer flags from prefix
3583  *  subflow.
3584  *
3585  * @param[in] dev_flow
3586  *   Pointer the created preifx subflow.
3587  *
3588  * @return
3589  *   The layers get from prefix subflow.
3590  */
3591 static inline uint64_t
3592 flow_get_prefix_layer_flags(struct mlx5_flow *dev_flow)
3593 {
3594         uint64_t layers = 0;
3595
3596         /*
3597          * Layers bits could be localization, but usually the compiler will
3598          * help to do the optimization work for source code.
3599          * If no decap actions, use the layers directly.
3600          */
3601         if (!(dev_flow->act_flags & MLX5_FLOW_ACTION_DECAP))
3602                 return dev_flow->handle->layers;
3603         /* Convert L3 layers with decap action. */
3604         if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L3_IPV4)
3605                 layers |= MLX5_FLOW_LAYER_OUTER_L3_IPV4;
3606         else if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L3_IPV6)
3607                 layers |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
3608         /* Convert L4 layers with decap action.  */
3609         if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L4_TCP)
3610                 layers |= MLX5_FLOW_LAYER_OUTER_L4_TCP;
3611         else if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L4_UDP)
3612                 layers |= MLX5_FLOW_LAYER_OUTER_L4_UDP;
3613         return layers;
3614 }
3615
3616 /**
3617  * Get metadata split action information.
3618  *
3619  * @param[in] actions
3620  *   Pointer to the list of actions.
3621  * @param[out] qrss
3622  *   Pointer to the return pointer.
3623  * @param[out] qrss_type
3624  *   Pointer to the action type to return. RTE_FLOW_ACTION_TYPE_END is returned
3625  *   if no QUEUE/RSS is found.
3626  * @param[out] encap_idx
3627  *   Pointer to the index of the encap action if exists, otherwise the last
3628  *   action index.
3629  *
3630  * @return
3631  *   Total number of actions.
3632  */
3633 static int
3634 flow_parse_metadata_split_actions_info(const struct rte_flow_action actions[],
3635                                        const struct rte_flow_action **qrss,
3636                                        int *encap_idx)
3637 {
3638         const struct rte_flow_action_raw_encap *raw_encap;
3639         int actions_n = 0;
3640         int raw_decap_idx = -1;
3641
3642         *encap_idx = -1;
3643         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
3644                 switch (actions->type) {
3645                 case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
3646                 case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
3647                         *encap_idx = actions_n;
3648                         break;
3649                 case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
3650                         raw_decap_idx = actions_n;
3651                         break;
3652                 case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
3653                         raw_encap = actions->conf;
3654                         if (raw_encap->size > MLX5_ENCAPSULATION_DECISION_SIZE)
3655                                 *encap_idx = raw_decap_idx != -1 ?
3656                                                       raw_decap_idx : actions_n;
3657                         break;
3658                 case RTE_FLOW_ACTION_TYPE_QUEUE:
3659                 case RTE_FLOW_ACTION_TYPE_RSS:
3660                         *qrss = actions;
3661                         break;
3662                 default:
3663                         break;
3664                 }
3665                 actions_n++;
3666         }
3667         if (*encap_idx == -1)
3668                 *encap_idx = actions_n;
3669         /* Count RTE_FLOW_ACTION_TYPE_END. */
3670         return actions_n + 1;
3671 }
3672
3673 /**
3674  * Check meter action from the action list.
3675  *
3676  * @param[in] actions
3677  *   Pointer to the list of actions.
3678  * @param[out] has_mtr
3679  *   Pointer to the meter exist flag.
3680  * @param[out] meter_id
3681  *   Pointer to the meter id.
3682  *
3683  * @return
3684  *   Total number of actions.
3685  */
3686 static int
3687 flow_check_meter_action(const struct rte_flow_action actions[],
3688                         bool *has_mtr,
3689                         uint32_t *meter_id)
3690 {
3691         const struct rte_flow_action_meter *mtr = NULL;
3692         int actions_n = 0;
3693
3694         MLX5_ASSERT(has_mtr);
3695         *has_mtr = false;
3696         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
3697                 switch (actions->type) {
3698                 case RTE_FLOW_ACTION_TYPE_METER:
3699                         mtr = actions->conf;
3700                         *meter_id = mtr->mtr_id;
3701                         *has_mtr = true;
3702                         break;
3703                 default:
3704                         break;
3705                 }
3706                 actions_n++;
3707         }
3708         /* Count RTE_FLOW_ACTION_TYPE_END. */
3709         return actions_n + 1;
3710 }
3711
3712 /**
3713  * Check if the flow should be split due to hairpin.
3714  * The reason for the split is that in current HW we can't
3715  * support encap and push-vlan on Rx, so if a flow contains
3716  * these actions we move it to Tx.
3717  *
3718  * @param dev
3719  *   Pointer to Ethernet device.
3720  * @param[in] attr
3721  *   Flow rule attributes.
3722  * @param[in] actions
3723  *   Associated actions (list terminated by the END action).
3724  *
3725  * @return
3726  *   > 0 the number of actions and the flow should be split,
3727  *   0 when no split required.
3728  */
3729 static int
3730 flow_check_hairpin_split(struct rte_eth_dev *dev,
3731                          const struct rte_flow_attr *attr,
3732                          const struct rte_flow_action actions[])
3733 {
3734         int queue_action = 0;
3735         int action_n = 0;
3736         int split = 0;
3737         const struct rte_flow_action_queue *queue;
3738         const struct rte_flow_action_rss *rss;
3739         const struct rte_flow_action_raw_encap *raw_encap;
3740         const struct rte_eth_hairpin_conf *conf;
3741
3742         if (!attr->ingress)
3743                 return 0;
3744         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
3745                 switch (actions->type) {
3746                 case RTE_FLOW_ACTION_TYPE_QUEUE:
3747                         queue = actions->conf;
3748                         if (queue == NULL)
3749                                 return 0;
3750                         conf = mlx5_rxq_get_hairpin_conf(dev, queue->index);
3751                         if (conf == NULL || conf->tx_explicit != 0)
3752                                 return 0;
3753                         queue_action = 1;
3754                         action_n++;
3755                         break;
3756                 case RTE_FLOW_ACTION_TYPE_RSS:
3757                         rss = actions->conf;
3758                         if (rss == NULL || rss->queue_num == 0)
3759                                 return 0;
3760                         conf = mlx5_rxq_get_hairpin_conf(dev, rss->queue[0]);
3761                         if (conf == NULL || conf->tx_explicit != 0)
3762                                 return 0;
3763                         queue_action = 1;
3764                         action_n++;
3765                         break;
3766                 case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
3767                 case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
3768                 case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
3769                 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
3770                 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
3771                         split++;
3772                         action_n++;
3773                         break;
3774                 case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
3775                         raw_encap = actions->conf;
3776                         if (raw_encap->size > MLX5_ENCAPSULATION_DECISION_SIZE)
3777                                 split++;
3778                         action_n++;
3779                         break;
3780                 default:
3781                         action_n++;
3782                         break;
3783                 }
3784         }
3785         if (split && queue_action)
3786                 return action_n;
3787         return 0;
3788 }
3789
3790 /* Declare flow create/destroy prototype in advance. */
3791 static uint32_t
3792 flow_list_create(struct rte_eth_dev *dev, uint32_t *list,
3793                  const struct rte_flow_attr *attr,
3794                  const struct rte_flow_item items[],
3795                  const struct rte_flow_action actions[],
3796                  bool external, struct rte_flow_error *error);
3797
3798 static void
3799 flow_list_destroy(struct rte_eth_dev *dev, uint32_t *list,
3800                   uint32_t flow_idx);
3801
3802 int
3803 flow_dv_mreg_match_cb(struct mlx5_hlist *list __rte_unused,
3804                       struct mlx5_hlist_entry *entry,
3805                       uint64_t key, void *cb_ctx __rte_unused)
3806 {
3807         struct mlx5_flow_mreg_copy_resource *mcp_res =
3808                 container_of(entry, typeof(*mcp_res), hlist_ent);
3809
3810         return mcp_res->mark_id != key;
3811 }
3812
3813 struct mlx5_hlist_entry *
3814 flow_dv_mreg_create_cb(struct mlx5_hlist *list, uint64_t key,
3815                        void *cb_ctx)
3816 {
3817         struct rte_eth_dev *dev = list->ctx;
3818         struct mlx5_priv *priv = dev->data->dev_private;
3819         struct mlx5_flow_cb_ctx *ctx = cb_ctx;
3820         struct mlx5_flow_mreg_copy_resource *mcp_res;
3821         struct rte_flow_error *error = ctx->error;
3822         uint32_t idx = 0;
3823         int ret;
3824         uint32_t mark_id = key;
3825         struct rte_flow_attr attr = {
3826                 .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
3827                 .ingress = 1,
3828         };
3829         struct mlx5_rte_flow_item_tag tag_spec = {
3830                 .data = mark_id,
3831         };
3832         struct rte_flow_item items[] = {
3833                 [1] = { .type = RTE_FLOW_ITEM_TYPE_END, },
3834         };
3835         struct rte_flow_action_mark ftag = {
3836                 .id = mark_id,
3837         };
3838         struct mlx5_flow_action_copy_mreg cp_mreg = {
3839                 .dst = REG_B,
3840                 .src = REG_NON,
3841         };
3842         struct rte_flow_action_jump jump = {
3843                 .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
3844         };
3845         struct rte_flow_action actions[] = {
3846                 [3] = { .type = RTE_FLOW_ACTION_TYPE_END, },
3847         };
3848
3849         /* Fill the register fileds in the flow. */
3850         ret = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
3851         if (ret < 0)
3852                 return NULL;
3853         tag_spec.id = ret;
3854         ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_RX, 0, error);
3855         if (ret < 0)
3856                 return NULL;
3857         cp_mreg.src = ret;
3858         /* Provide the full width of FLAG specific value. */
3859         if (mark_id == (priv->sh->dv_regc0_mask & MLX5_FLOW_MARK_DEFAULT))
3860                 tag_spec.data = MLX5_FLOW_MARK_DEFAULT;
3861         /* Build a new flow. */
3862         if (mark_id != MLX5_DEFAULT_COPY_ID) {
3863                 items[0] = (struct rte_flow_item){
3864                         .type = (enum rte_flow_item_type)
3865                                 MLX5_RTE_FLOW_ITEM_TYPE_TAG,
3866                         .spec = &tag_spec,
3867                 };
3868                 items[1] = (struct rte_flow_item){
3869                         .type = RTE_FLOW_ITEM_TYPE_END,
3870                 };
3871                 actions[0] = (struct rte_flow_action){
3872                         .type = (enum rte_flow_action_type)
3873                                 MLX5_RTE_FLOW_ACTION_TYPE_MARK,
3874                         .conf = &ftag,
3875                 };
3876                 actions[1] = (struct rte_flow_action){
3877                         .type = (enum rte_flow_action_type)
3878                                 MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
3879                         .conf = &cp_mreg,
3880                 };
3881                 actions[2] = (struct rte_flow_action){
3882                         .type = RTE_FLOW_ACTION_TYPE_JUMP,
3883                         .conf = &jump,
3884                 };
3885                 actions[3] = (struct rte_flow_action){
3886                         .type = RTE_FLOW_ACTION_TYPE_END,
3887                 };
3888         } else {
3889                 /* Default rule, wildcard match. */
3890                 attr.priority = MLX5_FLOW_LOWEST_PRIO_INDICATOR;
3891                 items[0] = (struct rte_flow_item){
3892                         .type = RTE_FLOW_ITEM_TYPE_END,
3893                 };
3894                 actions[0] = (struct rte_flow_action){
3895                         .type = (enum rte_flow_action_type)
3896                                 MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
3897                         .conf = &cp_mreg,
3898                 };
3899                 actions[1] = (struct rte_flow_action){
3900                         .type = RTE_FLOW_ACTION_TYPE_JUMP,
3901                         .conf = &jump,
3902                 };
3903                 actions[2] = (struct rte_flow_action){
3904                         .type = RTE_FLOW_ACTION_TYPE_END,
3905                 };
3906         }
3907         /* Build a new entry. */
3908         mcp_res = mlx5_ipool_zmalloc(priv->sh->ipool[MLX5_IPOOL_MCP], &idx);
3909         if (!mcp_res) {
3910                 rte_errno = ENOMEM;
3911                 return NULL;
3912         }
3913         mcp_res->idx = idx;
3914         mcp_res->mark_id = mark_id;
3915         /*
3916          * The copy Flows are not included in any list. There
3917          * ones are referenced from other Flows and can not
3918          * be applied, removed, deleted in ardbitrary order
3919          * by list traversing.
3920          */
3921         mcp_res->rix_flow = flow_list_create(dev, NULL, &attr, items,
3922                                          actions, false, error);
3923         if (!mcp_res->rix_flow) {
3924                 mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_MCP], idx);
3925                 return NULL;
3926         }
3927         return &mcp_res->hlist_ent;
3928 }
3929
3930 /**
3931  * Add a flow of copying flow metadata registers in RX_CP_TBL.
3932  *
3933  * As mark_id is unique, if there's already a registered flow for the mark_id,
3934  * return by increasing the reference counter of the resource. Otherwise, create
3935  * the resource (mcp_res) and flow.
3936  *
3937  * Flow looks like,
3938  *   - If ingress port is ANY and reg_c[1] is mark_id,
3939  *     flow_tag := mark_id, reg_b := reg_c[0] and jump to RX_ACT_TBL.
3940  *
3941  * For default flow (zero mark_id), flow is like,
3942  *   - If ingress port is ANY,
3943  *     reg_b := reg_c[0] and jump to RX_ACT_TBL.
3944  *
3945  * @param dev
3946  *   Pointer to Ethernet device.
3947  * @param mark_id
3948  *   ID of MARK action, zero means default flow for META.
3949  * @param[out] error
3950  *   Perform verbose error reporting if not NULL.
3951  *
3952  * @return
3953  *   Associated resource on success, NULL otherwise and rte_errno is set.
3954  */
3955 static struct mlx5_flow_mreg_copy_resource *
3956 flow_mreg_add_copy_action(struct rte_eth_dev *dev, uint32_t mark_id,
3957                           struct rte_flow_error *error)
3958 {
3959         struct mlx5_priv *priv = dev->data->dev_private;
3960         struct mlx5_hlist_entry *entry;
3961         struct mlx5_flow_cb_ctx ctx = {
3962                 .dev = dev,
3963                 .error = error,
3964         };
3965
3966         /* Check if already registered. */
3967         MLX5_ASSERT(priv->mreg_cp_tbl);
3968         entry = mlx5_hlist_register(priv->mreg_cp_tbl, mark_id, &ctx);
3969         if (!entry)
3970                 return NULL;
3971         return container_of(entry, struct mlx5_flow_mreg_copy_resource,
3972                             hlist_ent);
3973 }
3974
3975 void
3976 flow_dv_mreg_remove_cb(struct mlx5_hlist *list, struct mlx5_hlist_entry *entry)
3977 {
3978         struct mlx5_flow_mreg_copy_resource *mcp_res =
3979                 container_of(entry, typeof(*mcp_res), hlist_ent);
3980         struct rte_eth_dev *dev = list->ctx;
3981         struct mlx5_priv *priv = dev->data->dev_private;
3982
3983         MLX5_ASSERT(mcp_res->rix_flow);
3984         flow_list_destroy(dev, NULL, mcp_res->rix_flow);
3985         mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_MCP], mcp_res->idx);
3986 }
3987
3988 /**
3989  * Release flow in RX_CP_TBL.
3990  *
3991  * @param dev
3992  *   Pointer to Ethernet device.
3993  * @flow
3994  *   Parent flow for wich copying is provided.
3995  */
3996 static void
3997 flow_mreg_del_copy_action(struct rte_eth_dev *dev,
3998                           struct rte_flow *flow)
3999 {
4000         struct mlx5_flow_mreg_copy_resource *mcp_res;
4001         struct mlx5_priv *priv = dev->data->dev_private;
4002
4003         if (!flow->rix_mreg_copy)
4004                 return;
4005         mcp_res = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_MCP],
4006                                  flow->rix_mreg_copy);
4007         if (!mcp_res || !priv->mreg_cp_tbl)
4008                 return;
4009         MLX5_ASSERT(mcp_res->rix_flow);
4010         mlx5_hlist_unregister(priv->mreg_cp_tbl, &mcp_res->hlist_ent);
4011         flow->rix_mreg_copy = 0;
4012 }
4013
4014 /**
4015  * Remove the default copy action from RX_CP_TBL.
4016  *
4017  * This functions is called in the mlx5_dev_start(). No thread safe
4018  * is guaranteed.
4019  *
4020  * @param dev
4021  *   Pointer to Ethernet device.
4022  */
4023 static void
4024 flow_mreg_del_default_copy_action(struct rte_eth_dev *dev)
4025 {
4026         struct mlx5_hlist_entry *entry;
4027         struct mlx5_priv *priv = dev->data->dev_private;
4028
4029         /* Check if default flow is registered. */
4030         if (!priv->mreg_cp_tbl)
4031                 return;
4032         entry = mlx5_hlist_lookup(priv->mreg_cp_tbl,
4033                                   MLX5_DEFAULT_COPY_ID, NULL);
4034         if (!entry)
4035                 return;
4036         mlx5_hlist_unregister(priv->mreg_cp_tbl, entry);
4037 }
4038
4039 /**
4040  * Add the default copy action in in RX_CP_TBL.
4041  *
4042  * This functions is called in the mlx5_dev_start(). No thread safe
4043  * is guaranteed.
4044  *
4045  * @param dev
4046  *   Pointer to Ethernet device.
4047  * @param[out] error
4048  *   Perform verbose error reporting if not NULL.
4049  *
4050  * @return
4051  *   0 for success, negative value otherwise and rte_errno is set.
4052  */
4053 static int
4054 flow_mreg_add_default_copy_action(struct rte_eth_dev *dev,
4055                                   struct rte_flow_error *error)
4056 {
4057         struct mlx5_priv *priv = dev->data->dev_private;
4058         struct mlx5_flow_mreg_copy_resource *mcp_res;
4059
4060         /* Check whether extensive metadata feature is engaged. */
4061         if (!priv->config.dv_flow_en ||
4062             priv->config.dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
4063             !mlx5_flow_ext_mreg_supported(dev) ||
4064             !priv->sh->dv_regc0_mask)
4065                 return 0;
4066         /*
4067          * Add default mreg copy flow may be called multiple time, but
4068          * only be called once in stop. Avoid register it twice.
4069          */
4070         if (mlx5_hlist_lookup(priv->mreg_cp_tbl, MLX5_DEFAULT_COPY_ID, NULL))
4071                 return 0;
4072         mcp_res = flow_mreg_add_copy_action(dev, MLX5_DEFAULT_COPY_ID, error);
4073         if (!mcp_res)
4074                 return -rte_errno;
4075         return 0;
4076 }
4077
4078 /**
4079  * Add a flow of copying flow metadata registers in RX_CP_TBL.
4080  *
4081  * All the flow having Q/RSS action should be split by
4082  * flow_mreg_split_qrss_prep() to pass by RX_CP_TBL. A flow in the RX_CP_TBL
4083  * performs the following,
4084  *   - CQE->flow_tag := reg_c[1] (MARK)
4085  *   - CQE->flow_table_metadata (reg_b) := reg_c[0] (META)
4086  * As CQE's flow_tag is not a register, it can't be simply copied from reg_c[1]
4087  * but there should be a flow per each MARK ID set by MARK action.
4088  *
4089  * For the aforementioned reason, if there's a MARK action in flow's action
4090  * list, a corresponding flow should be added to the RX_CP_TBL in order to copy
4091  * the MARK ID to CQE's flow_tag like,
4092  *   - If reg_c[1] is mark_id,
4093  *     flow_tag := mark_id, reg_b := reg_c[0] and jump to RX_ACT_TBL.
4094  *
4095  * For SET_META action which stores value in reg_c[0], as the destination is
4096  * also a flow metadata register (reg_b), adding a default flow is enough. Zero
4097  * MARK ID means the default flow. The default flow looks like,
4098  *   - For all flow, reg_b := reg_c[0] and jump to RX_ACT_TBL.
4099  *
4100  * @param dev
4101  *   Pointer to Ethernet device.
4102  * @param flow
4103  *   Pointer to flow structure.
4104  * @param[in] actions
4105  *   Pointer to the list of actions.
4106  * @param[out] error
4107  *   Perform verbose error reporting if not NULL.
4108  *
4109  * @return
4110  *   0 on success, negative value otherwise and rte_errno is set.
4111  */
4112 static int
4113 flow_mreg_update_copy_table(struct rte_eth_dev *dev,
4114                             struct rte_flow *flow,
4115                             const struct rte_flow_action *actions,
4116                             struct rte_flow_error *error)
4117 {
4118         struct mlx5_priv *priv = dev->data->dev_private;
4119         struct mlx5_dev_config *config = &priv->config;
4120         struct mlx5_flow_mreg_copy_resource *mcp_res;
4121         const struct rte_flow_action_mark *mark;
4122
4123         /* Check whether extensive metadata feature is engaged. */
4124         if (!config->dv_flow_en ||
4125             config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
4126             !mlx5_flow_ext_mreg_supported(dev) ||
4127             !priv->sh->dv_regc0_mask)
4128                 return 0;
4129         /* Find MARK action. */
4130         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
4131                 switch (actions->type) {
4132                 case RTE_FLOW_ACTION_TYPE_FLAG:
4133                         mcp_res = flow_mreg_add_copy_action
4134                                 (dev, MLX5_FLOW_MARK_DEFAULT, error);
4135                         if (!mcp_res)
4136                                 return -rte_errno;
4137                         flow->rix_mreg_copy = mcp_res->idx;
4138                         return 0;
4139                 case RTE_FLOW_ACTION_TYPE_MARK:
4140                         mark = (const struct rte_flow_action_mark *)
4141                                 actions->conf;
4142                         mcp_res =
4143                                 flow_mreg_add_copy_action(dev, mark->id, error);
4144                         if (!mcp_res)
4145                                 return -rte_errno;
4146                         flow->rix_mreg_copy = mcp_res->idx;
4147                         return 0;
4148                 default:
4149                         break;
4150                 }
4151         }
4152         return 0;
4153 }
4154
4155 #define MLX5_MAX_SPLIT_ACTIONS 24
4156 #define MLX5_MAX_SPLIT_ITEMS 24
4157
4158 /**
4159  * Split the hairpin flow.
4160  * Since HW can't support encap and push-vlan on Rx, we move these
4161  * actions to Tx.
4162  * If the count action is after the encap then we also
4163  * move the count action. in this case the count will also measure
4164  * the outer bytes.
4165  *
4166  * @param dev
4167  *   Pointer to Ethernet device.
4168  * @param[in] actions
4169  *   Associated actions (list terminated by the END action).
4170  * @param[out] actions_rx
4171  *   Rx flow actions.
4172  * @param[out] actions_tx
4173  *   Tx flow actions..
4174  * @param[out] pattern_tx
4175  *   The pattern items for the Tx flow.
4176  * @param[out] flow_id
4177  *   The flow ID connected to this flow.
4178  *
4179  * @return
4180  *   0 on success.
4181  */
4182 static int
4183 flow_hairpin_split(struct rte_eth_dev *dev,
4184                    const struct rte_flow_action actions[],
4185                    struct rte_flow_action actions_rx[],
4186                    struct rte_flow_action actions_tx[],
4187                    struct rte_flow_item pattern_tx[],
4188                    uint32_t flow_id)
4189 {
4190         const struct rte_flow_action_raw_encap *raw_encap;
4191         const struct rte_flow_action_raw_decap *raw_decap;
4192         struct mlx5_rte_flow_action_set_tag *set_tag;
4193         struct rte_flow_action *tag_action;
4194         struct mlx5_rte_flow_item_tag *tag_item;
4195         struct rte_flow_item *item;
4196         char *addr;
4197         int encap = 0;
4198
4199         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
4200                 switch (actions->type) {
4201                 case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
4202                 case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
4203                 case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
4204                 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
4205                 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
4206                         rte_memcpy(actions_tx, actions,
4207                                sizeof(struct rte_flow_action));
4208                         actions_tx++;
4209                         break;
4210                 case RTE_FLOW_ACTION_TYPE_COUNT:
4211                         if (encap) {
4212                                 rte_memcpy(actions_tx, actions,
4213                                            sizeof(struct rte_flow_action));
4214                                 actions_tx++;
4215                         } else {
4216                                 rte_memcpy(actions_rx, actions,
4217                                            sizeof(struct rte_flow_action));
4218                                 actions_rx++;
4219                         }
4220                         break;
4221                 case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
4222                         raw_encap = actions->conf;
4223                         if (raw_encap->size > MLX5_ENCAPSULATION_DECISION_SIZE) {
4224                                 memcpy(actions_tx, actions,
4225                                        sizeof(struct rte_flow_action));
4226                                 actions_tx++;
4227                                 encap = 1;
4228                         } else {
4229                                 rte_memcpy(actions_rx, actions,
4230                                            sizeof(struct rte_flow_action));
4231                                 actions_rx++;
4232                         }
4233                         break;
4234                 case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
4235                         raw_decap = actions->conf;
4236                         if (raw_decap->size < MLX5_ENCAPSULATION_DECISION_SIZE) {
4237                                 memcpy(actions_tx, actions,
4238                                        sizeof(struct rte_flow_action));
4239                                 actions_tx++;
4240                         } else {
4241                                 rte_memcpy(actions_rx, actions,
4242                                            sizeof(struct rte_flow_action));
4243                                 actions_rx++;
4244                         }
4245                         break;
4246                 default:
4247                         rte_memcpy(actions_rx, actions,
4248                                    sizeof(struct rte_flow_action));
4249                         actions_rx++;
4250                         break;
4251                 }
4252         }
4253         /* Add set meta action and end action for the Rx flow. */
4254         tag_action = actions_rx;
4255         tag_action->type = (enum rte_flow_action_type)
4256                            MLX5_RTE_FLOW_ACTION_TYPE_TAG;
4257         actions_rx++;
4258         rte_memcpy(actions_rx, actions, sizeof(struct rte_flow_action));
4259         actions_rx++;
4260         set_tag = (void *)actions_rx;
4261         *set_tag = (struct mlx5_rte_flow_action_set_tag) {
4262                 .id = mlx5_flow_get_reg_id(dev, MLX5_HAIRPIN_RX, 0, NULL),
4263                 .data = flow_id,
4264         };
4265         MLX5_ASSERT(set_tag->id > REG_NON);
4266         tag_action->conf = set_tag;
4267         /* Create Tx item list. */
4268         rte_memcpy(actions_tx, actions, sizeof(struct rte_flow_action));
4269         addr = (void *)&pattern_tx[2];
4270         item = pattern_tx;
4271         item->type = (enum rte_flow_item_type)
4272                      MLX5_RTE_FLOW_ITEM_TYPE_TAG;
4273         tag_item = (void *)addr;
4274         tag_item->data = flow_id;
4275         tag_item->id = mlx5_flow_get_reg_id(dev, MLX5_HAIRPIN_TX, 0, NULL);
4276         MLX5_ASSERT(set_tag->id > REG_NON);
4277         item->spec = tag_item;
4278         addr += sizeof(struct mlx5_rte_flow_item_tag);
4279         tag_item = (void *)addr;
4280         tag_item->data = UINT32_MAX;
4281         tag_item->id = UINT16_MAX;
4282         item->mask = tag_item;
4283         item->last = NULL;
4284         item++;
4285         item->type = RTE_FLOW_ITEM_TYPE_END;
4286         return 0;
4287 }
4288
4289 /**
4290  * The last stage of splitting chain, just creates the subflow
4291  * without any modification.
4292  *
4293  * @param[in] dev
4294  *   Pointer to Ethernet device.
4295  * @param[in] flow
4296  *   Parent flow structure pointer.
4297  * @param[in, out] sub_flow
4298  *   Pointer to return the created subflow, may be NULL.
4299  * @param[in] attr
4300  *   Flow rule attributes.
4301  * @param[in] items
4302  *   Pattern specification (list terminated by the END pattern item).
4303  * @param[in] actions
4304  *   Associated actions (list terminated by the END action).
4305  * @param[in] flow_split_info
4306  *   Pointer to flow split info structure.
4307  * @param[out] error
4308  *   Perform verbose error reporting if not NULL.
4309  * @return
4310  *   0 on success, negative value otherwise
4311  */
4312 static int
4313 flow_create_split_inner(struct rte_eth_dev *dev,
4314                         struct rte_flow *flow,
4315                         struct mlx5_flow **sub_flow,
4316                         const struct rte_flow_attr *attr,
4317                         const struct rte_flow_item items[],
4318                         const struct rte_flow_action actions[],
4319                         struct mlx5_flow_split_info *flow_split_info,
4320                         struct rte_flow_error *error)
4321 {
4322         struct mlx5_flow *dev_flow;
4323
4324         dev_flow = flow_drv_prepare(dev, flow, attr, items, actions,
4325                                     flow_split_info->flow_idx, error);
4326         if (!dev_flow)
4327                 return -rte_errno;
4328         dev_flow->flow = flow;
4329         dev_flow->external = flow_split_info->external;
4330         dev_flow->skip_scale = flow_split_info->skip_scale;
4331         /* Subflow object was created, we must include one in the list. */
4332         SILIST_INSERT(&flow->dev_handles, dev_flow->handle_idx,
4333                       dev_flow->handle, next);
4334         /*
4335          * If dev_flow is as one of the suffix flow, some actions in suffix
4336          * flow may need some user defined item layer flags, and pass the
4337          * Metadate rxq mark flag to suffix flow as well.
4338          */
4339         if (flow_split_info->prefix_layers)
4340                 dev_flow->handle->layers = flow_split_info->prefix_layers;
4341         if (flow_split_info->prefix_mark)
4342                 dev_flow->handle->mark = 1;
4343         if (sub_flow)
4344                 *sub_flow = dev_flow;
4345         return flow_drv_translate(dev, dev_flow, attr, items, actions, error);
4346 }
4347
4348 /**
4349  * Split the meter flow.
4350  *
4351  * As meter flow will split to three sub flow, other than meter
4352  * action, the other actions make sense to only meter accepts
4353  * the packet. If it need to be dropped, no other additional
4354  * actions should be take.
4355  *
4356  * One kind of special action which decapsulates the L3 tunnel
4357  * header will be in the prefix sub flow, as not to take the
4358  * L3 tunnel header into account.
4359  *
4360  * @param[in] dev
4361  *   Pointer to Ethernet device.
4362  * @param[in] flow
4363  *   Parent flow structure pointer.
4364  * @param[in] fm
4365  *   Pointer to flow meter structure.
4366  * @param[in] attr
4367  *   Flow rule attributes.
4368  * @param[in] items
4369  *   Pattern specification (list terminated by the END pattern item).
4370  * @param[out] sfx_items
4371  *   Suffix flow match items (list terminated by the END pattern item).
4372  * @param[in] actions
4373  *   Associated actions (list terminated by the END action).
4374  * @param[out] actions_sfx
4375  *   Suffix flow actions.
4376  * @param[out] actions_pre
4377  *   Prefix flow actions.
4378  * @param[out] error
4379  *   Perform verbose error reporting if not NULL.
4380  *
4381  * @return
4382  *   The flow id, 0 otherwise and rte_errno is set.
4383  */
4384 static uint32_t
4385 flow_meter_split_prep(struct rte_eth_dev *dev,
4386                       struct rte_flow *flow,
4387                       struct mlx5_flow_meter_info *fm,
4388                       const struct rte_flow_attr *attr,
4389                       const struct rte_flow_item items[],
4390                       struct rte_flow_item sfx_items[],
4391                       const struct rte_flow_action actions[],
4392                       struct rte_flow_action actions_sfx[],
4393                       struct rte_flow_action actions_pre[],
4394                       struct rte_flow_error *error)
4395 {
4396         struct mlx5_priv *priv = dev->data->dev_private;
4397         struct rte_flow_action *tag_action = NULL;
4398         struct rte_flow_item *tag_item;
4399         struct mlx5_rte_flow_action_set_tag *set_tag;
4400         const struct rte_flow_action_raw_encap *raw_encap;
4401         const struct rte_flow_action_raw_decap *raw_decap;
4402         struct mlx5_rte_flow_item_tag *tag_item_spec;
4403         struct mlx5_rte_flow_item_tag *tag_item_mask;
4404         uint32_t tag_id = 0;
4405         bool copy_vlan = false;
4406         struct rte_flow_action *hw_mtr_action;
4407         struct rte_flow_action_jump *jump_data;
4408         struct rte_flow_action *action_pre_head = NULL;
4409         bool mtr_first = priv->sh->meter_aso_en &&
4410                         (attr->egress ||
4411                         (attr->transfer && priv->representor_id != UINT16_MAX));
4412         uint8_t mtr_id_offset = priv->mtr_reg_share ? MLX5_MTR_COLOR_BITS : 0;
4413         uint8_t mtr_reg_bits = priv->mtr_reg_share ?
4414                                 MLX5_MTR_IDLE_BITS_IN_COLOR_REG : MLX5_REG_BITS;
4415         uint32_t flow_id = 0;
4416         uint32_t flow_id_reversed = 0;
4417         uint8_t flow_id_bits = 0;
4418         int shift;
4419
4420         /* For ASO meter, meter must be before tag in TX direction. */
4421         if (mtr_first) {
4422                 action_pre_head = actions_pre++;
4423                 /* Leave space for tag action. */
4424                 tag_action = actions_pre++;
4425         }
4426         /* Prepare the actions for prefix and suffix flow. */
4427         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
4428                 struct rte_flow_action *action_cur = NULL;
4429
4430                 switch (actions->type) {
4431                 case RTE_FLOW_ACTION_TYPE_METER:
4432                         if (mtr_first) {
4433                                 action_cur = action_pre_head;
4434                         } else {
4435                                 /* Leave space for tag action. */
4436                                 tag_action = actions_pre++;
4437                                 action_cur = actions_pre++;
4438                         }
4439                         break;
4440                 case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
4441                 case RTE_FLOW_ACTION_TYPE_NVGRE_DECAP:
4442                         action_cur = actions_pre++;
4443                         break;
4444                 case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
4445                         raw_encap = actions->conf;
4446                         if (raw_encap->size < MLX5_ENCAPSULATION_DECISION_SIZE)
4447                                 action_cur = actions_pre++;
4448                         break;
4449                 case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
4450                         raw_decap = actions->conf;
4451                         if (raw_decap->size > MLX5_ENCAPSULATION_DECISION_SIZE)
4452                                 action_cur = actions_pre++;
4453                         break;
4454                 case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
4455                 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
4456                         copy_vlan = true;
4457                         break;
4458                 default:
4459                         break;
4460                 }
4461                 if (!action_cur)
4462                         action_cur = actions_sfx++;
4463                 memcpy(action_cur, actions, sizeof(struct rte_flow_action));
4464         }
4465         /* Add end action to the actions. */
4466         actions_sfx->type = RTE_FLOW_ACTION_TYPE_END;
4467         if (priv->sh->meter_aso_en) {
4468                 /**
4469                  * For ASO meter, need to add an extra jump action explicitly,
4470                  * to jump from meter to policer table.
4471                  */
4472                 hw_mtr_action = actions_pre;
4473                 hw_mtr_action->type = RTE_FLOW_ACTION_TYPE_JUMP;
4474                 actions_pre++;
4475                 actions_pre->type = RTE_FLOW_ACTION_TYPE_END;
4476                 actions_pre++;
4477                 jump_data = (struct rte_flow_action_jump *)actions_pre;
4478                 jump_data->group = attr->transfer ?
4479                                 (MLX5_FLOW_TABLE_LEVEL_METER - 1) :
4480                                  MLX5_FLOW_TABLE_LEVEL_METER;
4481                 hw_mtr_action->conf = jump_data;
4482                 actions_pre = (struct rte_flow_action *)(jump_data + 1);
4483         } else {
4484                 actions_pre->type = RTE_FLOW_ACTION_TYPE_END;
4485                 actions_pre++;
4486         }
4487         /* Generate meter flow_id only if support multiple flows per meter. */
4488         mlx5_ipool_malloc(fm->flow_ipool, &tag_id);
4489         if (!tag_id)
4490                 return rte_flow_error_set(error, ENOMEM,
4491                                 RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
4492                                 "Failed to allocate meter flow id.");
4493         flow_id = tag_id - 1;
4494         flow_id_bits = MLX5_REG_BITS - __builtin_clz(flow_id);
4495         flow_id_bits = flow_id_bits ? flow_id_bits : 1;
4496         if ((flow_id_bits + priv->max_mtr_bits) > mtr_reg_bits) {
4497                 mlx5_ipool_free(fm->flow_ipool, tag_id);
4498                 return rte_flow_error_set(error, EINVAL,
4499                                 RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
4500                                 "Meter flow id exceeds max limit.");
4501         }
4502         if (flow_id_bits > priv->max_mtr_flow_bits)
4503                 priv->max_mtr_flow_bits = flow_id_bits;
4504         /* Prepare the suffix subflow items. */
4505         tag_item = sfx_items++;
4506         for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
4507                 int item_type = items->type;
4508
4509                 switch (item_type) {
4510                 case RTE_FLOW_ITEM_TYPE_PORT_ID:
4511                         memcpy(sfx_items, items, sizeof(*sfx_items));
4512                         sfx_items++;
4513                         break;
4514                 case RTE_FLOW_ITEM_TYPE_VLAN:
4515                         if (copy_vlan) {
4516                                 memcpy(sfx_items, items, sizeof(*sfx_items));
4517                                 /*
4518                                  * Convert to internal match item, it is used
4519                                  * for vlan push and set vid.
4520                                  */
4521                                 sfx_items->type = (enum rte_flow_item_type)
4522                                                   MLX5_RTE_FLOW_ITEM_TYPE_VLAN;
4523                                 sfx_items++;
4524                         }
4525                         break;
4526                 default:
4527                         break;
4528                 }
4529         }
4530         sfx_items->type = RTE_FLOW_ITEM_TYPE_END;
4531         sfx_items++;
4532         /* Build tag actions and items for meter_id/meter flow_id. */
4533         assert(tag_action);
4534         set_tag = (struct mlx5_rte_flow_action_set_tag *)actions_pre;
4535         tag_item_spec = (struct mlx5_rte_flow_item_tag *)sfx_items;
4536         tag_item_mask = tag_item_spec + 1;
4537         /* Both flow_id and meter_id share the same register. */
4538         *set_tag = (struct mlx5_rte_flow_action_set_tag) {
4539                 .id = (enum modify_reg)mlx5_flow_get_reg_id(dev, MLX5_MTR_ID,
4540                                                             0, error),
4541                 .offset = mtr_id_offset,
4542                 .length = mtr_reg_bits,
4543                 .data = flow->meter,
4544         };
4545         /*
4546          * The color Reg bits used by flow_id are growing from
4547          * msb to lsb, so must do bit reverse for flow_id val in RegC.
4548          */
4549         for (shift = 0; shift < flow_id_bits; shift++)
4550                 flow_id_reversed = (flow_id_reversed << 1) |
4551                               ((flow_id >> shift) & 0x1);
4552         set_tag->data |= flow_id_reversed << (mtr_reg_bits - flow_id_bits);
4553         tag_item_spec->id = set_tag->id;
4554         tag_item_spec->data = set_tag->data << mtr_id_offset;
4555         tag_item_mask->data = UINT32_MAX << mtr_id_offset;
4556         tag_action->type = (enum rte_flow_action_type)
4557                                 MLX5_RTE_FLOW_ACTION_TYPE_TAG;
4558         tag_action->conf = set_tag;
4559         tag_item->type = (enum rte_flow_item_type)
4560                                 MLX5_RTE_FLOW_ITEM_TYPE_TAG;
4561         tag_item->spec = tag_item_spec;
4562         tag_item->last = NULL;
4563         tag_item->mask = tag_item_mask;
4564         return tag_id;
4565 }
4566
4567 /**
4568  * Split action list having QUEUE/RSS for metadata register copy.
4569  *
4570  * Once Q/RSS action is detected in user's action list, the flow action
4571  * should be split in order to copy metadata registers, which will happen in
4572  * RX_CP_TBL like,
4573  *   - CQE->flow_tag := reg_c[1] (MARK)
4574  *   - CQE->flow_table_metadata (reg_b) := reg_c[0] (META)
4575  * The Q/RSS action will be performed on RX_ACT_TBL after passing by RX_CP_TBL.
4576  * This is because the last action of each flow must be a terminal action
4577  * (QUEUE, RSS or DROP).
4578  *
4579  * Flow ID must be allocated to identify actions in the RX_ACT_TBL and it is
4580  * stored and kept in the mlx5_flow structure per each sub_flow.
4581  *
4582  * The Q/RSS action is replaced with,
4583  *   - SET_TAG, setting the allocated flow ID to reg_c[2].
4584  * And the following JUMP action is added at the end,
4585  *   - JUMP, to RX_CP_TBL.
4586  *
4587  * A flow to perform remained Q/RSS action will be created in RX_ACT_TBL by
4588  * flow_create_split_metadata() routine. The flow will look like,
4589  *   - If flow ID matches (reg_c[2]), perform Q/RSS.
4590  *
4591  * @param dev
4592  *   Pointer to Ethernet device.
4593  * @param[out] split_actions
4594  *   Pointer to store split actions to jump to CP_TBL.
4595  * @param[in] actions
4596  *   Pointer to the list of original flow actions.
4597  * @param[in] qrss
4598  *   Pointer to the Q/RSS action.
4599  * @param[in] actions_n
4600  *   Number of original actions.
4601  * @param[out] error
4602  *   Perform verbose error reporting if not NULL.
4603  *
4604  * @return
4605  *   non-zero unique flow_id on success, otherwise 0 and
4606  *   error/rte_error are set.
4607  */
4608 static uint32_t
4609 flow_mreg_split_qrss_prep(struct rte_eth_dev *dev,
4610                           struct rte_flow_action *split_actions,
4611                           const struct rte_flow_action *actions,
4612                           const struct rte_flow_action *qrss,
4613                           int actions_n, struct rte_flow_error *error)
4614 {
4615         struct mlx5_priv *priv = dev->data->dev_private;
4616         struct mlx5_rte_flow_action_set_tag *set_tag;
4617         struct rte_flow_action_jump *jump;
4618         const int qrss_idx = qrss - actions;
4619         uint32_t flow_id = 0;
4620         int ret = 0;
4621
4622         /*
4623          * Given actions will be split
4624          * - Replace QUEUE/RSS action with SET_TAG to set flow ID.
4625          * - Add jump to mreg CP_TBL.
4626          * As a result, there will be one more action.
4627          */
4628         ++actions_n;
4629         memcpy(split_actions, actions, sizeof(*split_actions) * actions_n);
4630         set_tag = (void *)(split_actions + actions_n);
4631         /*
4632          * If tag action is not set to void(it means we are not the meter
4633          * suffix flow), add the tag action. Since meter suffix flow already
4634          * has the tag added.
4635          */
4636         if (split_actions[qrss_idx].type != RTE_FLOW_ACTION_TYPE_VOID) {
4637                 /*
4638                  * Allocate the new subflow ID. This one is unique within
4639                  * device and not shared with representors. Otherwise,
4640                  * we would have to resolve multi-thread access synch
4641                  * issue. Each flow on the shared device is appended
4642                  * with source vport identifier, so the resulting
4643                  * flows will be unique in the shared (by master and
4644                  * representors) domain even if they have coinciding
4645                  * IDs.
4646                  */
4647                 mlx5_ipool_malloc(priv->sh->ipool
4648                                   [MLX5_IPOOL_RSS_EXPANTION_FLOW_ID], &flow_id);
4649                 if (!flow_id)
4650                         return rte_flow_error_set(error, ENOMEM,
4651                                                   RTE_FLOW_ERROR_TYPE_ACTION,
4652                                                   NULL, "can't allocate id "
4653                                                   "for split Q/RSS subflow");
4654                 /* Internal SET_TAG action to set flow ID. */
4655                 *set_tag = (struct mlx5_rte_flow_action_set_tag){
4656                         .data = flow_id,
4657                 };
4658                 ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0, error);
4659                 if (ret < 0)
4660                         return ret;
4661                 set_tag->id = ret;
4662                 /* Construct new actions array. */
4663                 /* Replace QUEUE/RSS action. */
4664                 split_actions[qrss_idx] = (struct rte_flow_action){
4665                         .type = (enum rte_flow_action_type)
4666                                 MLX5_RTE_FLOW_ACTION_TYPE_TAG,
4667                         .conf = set_tag,
4668                 };
4669         }
4670         /* JUMP action to jump to mreg copy table (CP_TBL). */
4671         jump = (void *)(set_tag + 1);
4672         *jump = (struct rte_flow_action_jump){
4673                 .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
4674         };
4675         split_actions[actions_n - 2] = (struct rte_flow_action){
4676                 .type = RTE_FLOW_ACTION_TYPE_JUMP,
4677                 .conf = jump,
4678         };
4679         split_actions[actions_n - 1] = (struct rte_flow_action){
4680                 .type = RTE_FLOW_ACTION_TYPE_END,
4681         };
4682         return flow_id;
4683 }
4684
4685 /**
4686  * Extend the given action list for Tx metadata copy.
4687  *
4688  * Copy the given action list to the ext_actions and add flow metadata register
4689  * copy action in order to copy reg_a set by WQE to reg_c[0].
4690  *
4691  * @param[out] ext_actions
4692  *   Pointer to the extended action list.
4693  * @param[in] actions
4694  *   Pointer to the list of actions.
4695  * @param[in] actions_n
4696  *   Number of actions in the list.
4697  * @param[out] error
4698  *   Perform verbose error reporting if not NULL.
4699  * @param[in] encap_idx
4700  *   The encap action inndex.
4701  *
4702  * @return
4703  *   0 on success, negative value otherwise
4704  */
4705 static int
4706 flow_mreg_tx_copy_prep(struct rte_eth_dev *dev,
4707                        struct rte_flow_action *ext_actions,
4708                        const struct rte_flow_action *actions,
4709                        int actions_n, struct rte_flow_error *error,
4710                        int encap_idx)
4711 {
4712         struct mlx5_flow_action_copy_mreg *cp_mreg =
4713                 (struct mlx5_flow_action_copy_mreg *)
4714                         (ext_actions + actions_n + 1);
4715         int ret;
4716
4717         ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_RX, 0, error);
4718         if (ret < 0)
4719                 return ret;
4720         cp_mreg->dst = ret;
4721         ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_TX, 0, error);
4722         if (ret < 0)
4723                 return ret;
4724         cp_mreg->src = ret;
4725         if (encap_idx != 0)
4726                 memcpy(ext_actions, actions, sizeof(*ext_actions) * encap_idx);
4727         if (encap_idx == actions_n - 1) {
4728                 ext_actions[actions_n - 1] = (struct rte_flow_action){
4729                         .type = (enum rte_flow_action_type)
4730                                 MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
4731                         .conf = cp_mreg,
4732                 };
4733                 ext_actions[actions_n] = (struct rte_flow_action){
4734                         .type = RTE_FLOW_ACTION_TYPE_END,
4735                 };
4736         } else {
4737                 ext_actions[encap_idx] = (struct rte_flow_action){
4738                         .type = (enum rte_flow_action_type)
4739                                 MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
4740                         .conf = cp_mreg,
4741                 };
4742                 memcpy(ext_actions + encap_idx + 1, actions + encap_idx,
4743                                 sizeof(*ext_actions) * (actions_n - encap_idx));
4744         }
4745         return 0;
4746 }
4747
4748 /**
4749  * Check the match action from the action list.
4750  *
4751  * @param[in] actions
4752  *   Pointer to the list of actions.
4753  * @param[in] attr
4754  *   Flow rule attributes.
4755  * @param[in] action
4756  *   The action to be check if exist.
4757  * @param[out] match_action_pos
4758  *   Pointer to the position of the matched action if exists, otherwise is -1.
4759  * @param[out] qrss_action_pos
4760  *   Pointer to the position of the Queue/RSS action if exists, otherwise is -1.
4761  * @param[out] modify_after_mirror
4762  *   Pointer to the flag of modify action after FDB mirroring.
4763  *
4764  * @return
4765  *   > 0 the total number of actions.
4766  *   0 if not found match action in action list.
4767  */
4768 static int
4769 flow_check_match_action(const struct rte_flow_action actions[],
4770                         const struct rte_flow_attr *attr,
4771                         enum rte_flow_action_type action,
4772                         int *match_action_pos, int *qrss_action_pos,
4773                         int *modify_after_mirror)
4774 {
4775         const struct rte_flow_action_sample *sample;
4776         int actions_n = 0;
4777         uint32_t ratio = 0;
4778         int sub_type = 0;
4779         int flag = 0;
4780         int fdb_mirror = 0;
4781
4782         *match_action_pos = -1;
4783         *qrss_action_pos = -1;
4784         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
4785                 if (actions->type == action) {
4786                         flag = 1;
4787                         *match_action_pos = actions_n;
4788                 }
4789                 switch (actions->type) {
4790                 case RTE_FLOW_ACTION_TYPE_QUEUE:
4791                 case RTE_FLOW_ACTION_TYPE_RSS:
4792                         *qrss_action_pos = actions_n;
4793                         break;
4794                 case RTE_FLOW_ACTION_TYPE_SAMPLE:
4795                         sample = actions->conf;
4796                         ratio = sample->ratio;
4797                         sub_type = ((const struct rte_flow_action *)
4798                                         (sample->actions))->type;
4799                         if (ratio == 1 && attr->transfer)
4800                                 fdb_mirror = 1;
4801                         break;
4802                 case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
4803                 case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
4804                 case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
4805                 case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
4806                 case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
4807                 case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
4808                 case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
4809                 case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
4810                 case RTE_FLOW_ACTION_TYPE_DEC_TTL:
4811                 case RTE_FLOW_ACTION_TYPE_SET_TTL:
4812                 case RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ:
4813                 case RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ:
4814                 case RTE_FLOW_ACTION_TYPE_INC_TCP_ACK:
4815                 case RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK:
4816                 case RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP:
4817                 case RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP:
4818                 case RTE_FLOW_ACTION_TYPE_FLAG:
4819                 case RTE_FLOW_ACTION_TYPE_MARK:
4820                 case RTE_FLOW_ACTION_TYPE_SET_META:
4821                 case RTE_FLOW_ACTION_TYPE_SET_TAG:
4822                 case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
4823                 case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
4824                 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
4825                 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
4826                 case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
4827                 case RTE_FLOW_ACTION_TYPE_NVGRE_DECAP:
4828                 case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
4829                 case RTE_FLOW_ACTION_TYPE_MODIFY_FIELD:
4830                         if (fdb_mirror)
4831                                 *modify_after_mirror = 1;
4832                         break;
4833                 default:
4834                         break;
4835                 }
4836                 actions_n++;
4837         }
4838         if (flag && fdb_mirror && !*modify_after_mirror) {
4839                 /* FDB mirroring uses the destination array to implement
4840                  * instead of FLOW_SAMPLER object.
4841                  */
4842                 if (sub_type != RTE_FLOW_ACTION_TYPE_END)
4843                         flag = 0;
4844         }
4845         /* Count RTE_FLOW_ACTION_TYPE_END. */
4846         return flag ? actions_n + 1 : 0;
4847 }
4848
4849 #define SAMPLE_SUFFIX_ITEM 2
4850
4851 /**
4852  * Split the sample flow.
4853  *
4854  * As sample flow will split to two sub flow, sample flow with
4855  * sample action, the other actions will move to new suffix flow.
4856  *
4857  * Also add unique tag id with tag action in the sample flow,
4858  * the same tag id will be as match in the suffix flow.
4859  *
4860  * @param dev
4861  *   Pointer to Ethernet device.
4862  * @param[in] add_tag
4863  *   Add extra tag action flag.
4864  * @param[out] sfx_items
4865  *   Suffix flow match items (list terminated by the END pattern item).
4866  * @param[in] actions
4867  *   Associated actions (list terminated by the END action).
4868  * @param[out] actions_sfx
4869  *   Suffix flow actions.
4870  * @param[out] actions_pre
4871  *   Prefix flow actions.
4872  * @param[in] actions_n
4873  *  The total number of actions.
4874  * @param[in] sample_action_pos
4875  *   The sample action position.
4876  * @param[in] qrss_action_pos
4877  *   The Queue/RSS action position.
4878  * @param[in] jump_table
4879  *   Add extra jump action flag.
4880  * @param[out] error
4881  *   Perform verbose error reporting if not NULL.
4882  *
4883  * @return
4884  *   0 on success, or unique flow_id, a negative errno value
4885  *   otherwise and rte_errno is set.
4886  */
4887 static int
4888 flow_sample_split_prep(struct rte_eth_dev *dev,
4889                        int add_tag,
4890                        struct rte_flow_item sfx_items[],
4891                        const struct rte_flow_action actions[],
4892                        struct rte_flow_action actions_sfx[],
4893                        struct rte_flow_action actions_pre[],
4894                        int actions_n,
4895                        int sample_action_pos,
4896                        int qrss_action_pos,
4897                        int jump_table,
4898                        struct rte_flow_error *error)
4899 {
4900         struct mlx5_priv *priv = dev->data->dev_private;
4901         struct mlx5_rte_flow_action_set_tag *set_tag;
4902         struct mlx5_rte_flow_item_tag *tag_spec;
4903         struct mlx5_rte_flow_item_tag *tag_mask;
4904         struct rte_flow_action_jump *jump_action;
4905         uint32_t tag_id = 0;
4906         int index;
4907         int append_index = 0;
4908         int ret;
4909
4910         if (sample_action_pos < 0)
4911                 return rte_flow_error_set(error, EINVAL,
4912                                           RTE_FLOW_ERROR_TYPE_ACTION,
4913                                           NULL, "invalid position of sample "
4914                                           "action in list");
4915         /* Prepare the actions for prefix and suffix flow. */
4916         if (qrss_action_pos >= 0 && qrss_action_pos < sample_action_pos) {
4917                 index = qrss_action_pos;
4918                 /* Put the preceding the Queue/RSS action into prefix flow. */
4919                 if (index != 0)
4920                         memcpy(actions_pre, actions,
4921                                sizeof(struct rte_flow_action) * index);
4922                 /* Put others preceding the sample action into prefix flow. */
4923                 if (sample_action_pos > index + 1)
4924                         memcpy(actions_pre + index, actions + index + 1,
4925                                sizeof(struct rte_flow_action) *
4926                                (sample_action_pos - index - 1));
4927                 index = sample_action_pos - 1;
4928                 /* Put Queue/RSS action into Suffix flow. */
4929                 memcpy(actions_sfx, actions + qrss_action_pos,
4930                        sizeof(struct rte_flow_action));
4931                 actions_sfx++;
4932         } else {
4933                 index = sample_action_pos;
4934                 if (index != 0)
4935                         memcpy(actions_pre, actions,
4936                                sizeof(struct rte_flow_action) * index);
4937         }
4938         /* For CX5, add an extra tag action for NIC-RX and E-Switch ingress.
4939          * For CX6DX and above, metadata registers Cx preserve their value,
4940          * add an extra tag action for NIC-RX and E-Switch Domain.
4941          */
4942         if (add_tag) {
4943                 /* Prepare the prefix tag action. */
4944                 append_index++;
4945                 set_tag = (void *)(actions_pre + actions_n + append_index);
4946                 ret = mlx5_flow_get_reg_id(dev, MLX5_APP_TAG, 0, error);
4947                 if (ret < 0)
4948                         return ret;
4949                 mlx5_ipool_malloc(priv->sh->ipool
4950                                   [MLX5_IPOOL_RSS_EXPANTION_FLOW_ID], &tag_id);
4951                 *set_tag = (struct mlx5_rte_flow_action_set_tag) {
4952                         .id = ret,
4953                         .data = tag_id,
4954                 };
4955                 /* Prepare the suffix subflow items. */
4956                 tag_spec = (void *)(sfx_items + SAMPLE_SUFFIX_ITEM);
4957                 tag_spec->data = tag_id;
4958                 tag_spec->id = set_tag->id;
4959                 tag_mask = tag_spec + 1;
4960                 tag_mask->data = UINT32_MAX;
4961                 sfx_items[0] = (struct rte_flow_item){
4962                         .type = (enum rte_flow_item_type)
4963                                 MLX5_RTE_FLOW_ITEM_TYPE_TAG,
4964                         .spec = tag_spec,
4965                         .last = NULL,
4966                         .mask = tag_mask,
4967                 };
4968                 sfx_items[1] = (struct rte_flow_item){
4969                         .type = (enum rte_flow_item_type)
4970                                 RTE_FLOW_ITEM_TYPE_END,
4971                 };
4972                 /* Prepare the tag action in prefix subflow. */
4973                 actions_pre[index++] =
4974                         (struct rte_flow_action){
4975                         .type = (enum rte_flow_action_type)
4976                                 MLX5_RTE_FLOW_ACTION_TYPE_TAG,
4977                         .conf = set_tag,
4978                 };
4979         }
4980         memcpy(actions_pre + index, actions + sample_action_pos,
4981                sizeof(struct rte_flow_action));
4982         index += 1;
4983         /* For the modify action after the sample action in E-Switch mirroring,
4984          * Add the extra jump action in prefix subflow and jump into the next
4985          * table, then do the modify action in the new table.
4986          */
4987         if (jump_table) {
4988                 /* Prepare the prefix jump action. */
4989                 append_index++;
4990                 jump_action = (void *)(actions_pre + actions_n + append_index);
4991                 jump_action->group = jump_table;
4992                 actions_pre[index++] =
4993                         (struct rte_flow_action){
4994                         .type = (enum rte_flow_action_type)
4995                                 RTE_FLOW_ACTION_TYPE_JUMP,
4996                         .conf = jump_action,
4997                 };
4998         }
4999         actions_pre[index] = (struct rte_flow_action){
5000                 .type = (enum rte_flow_action_type)
5001                         RTE_FLOW_ACTION_TYPE_END,
5002         };
5003         /* Put the actions after sample into Suffix flow. */
5004         memcpy(actions_sfx, actions + sample_action_pos + 1,
5005                sizeof(struct rte_flow_action) *
5006                (actions_n - sample_action_pos - 1));
5007         return tag_id;
5008 }
5009
5010 /**
5011  * The splitting for metadata feature.
5012  *
5013  * - Q/RSS action on NIC Rx should be split in order to pass by
5014  *   the mreg copy table (RX_CP_TBL) and then it jumps to the
5015  *   action table (RX_ACT_TBL) which has the split Q/RSS action.
5016  *
5017  * - All the actions on NIC Tx should have a mreg copy action to
5018  *   copy reg_a from WQE to reg_c[0].
5019  *
5020  * @param dev
5021  *   Pointer to Ethernet device.
5022  * @param[in] flow
5023  *   Parent flow structure pointer.
5024  * @param[in] attr
5025  *   Flow rule attributes.
5026  * @param[in] items
5027  *   Pattern specification (list terminated by the END pattern item).
5028  * @param[in] actions
5029  *   Associated actions (list terminated by the END action).
5030  * @param[in] flow_split_info
5031  *   Pointer to flow split info structure.
5032  * @param[out] error
5033  *   Perform verbose error reporting if not NULL.
5034  * @return
5035  *   0 on success, negative value otherwise
5036  */
5037 static int
5038 flow_create_split_metadata(struct rte_eth_dev *dev,
5039                            struct rte_flow *flow,
5040                            const struct rte_flow_attr *attr,
5041                            const struct rte_flow_item items[],
5042                            const struct rte_flow_action actions[],
5043                            struct mlx5_flow_split_info *flow_split_info,
5044                            struct rte_flow_error *error)
5045 {
5046         struct mlx5_priv *priv = dev->data->dev_private;
5047         struct mlx5_dev_config *config = &priv->config;
5048         const struct rte_flow_action *qrss = NULL;
5049         struct rte_flow_action *ext_actions = NULL;
5050         struct mlx5_flow *dev_flow = NULL;
5051         uint32_t qrss_id = 0;
5052         int mtr_sfx = 0;
5053         size_t act_size;
5054         int actions_n;
5055         int encap_idx;
5056         int ret;
5057
5058         /* Check whether extensive metadata feature is engaged. */
5059         if (!config->dv_flow_en ||
5060             config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
5061             !mlx5_flow_ext_mreg_supported(dev))
5062                 return flow_create_split_inner(dev, flow, NULL, attr, items,
5063                                                actions, flow_split_info, error);
5064         actions_n = flow_parse_metadata_split_actions_info(actions, &qrss,
5065                                                            &encap_idx);
5066         if (qrss) {
5067                 /* Exclude hairpin flows from splitting. */
5068                 if (qrss->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
5069                         const struct rte_flow_action_queue *queue;
5070
5071                         queue = qrss->conf;
5072                         if (mlx5_rxq_get_type(dev, queue->index) ==
5073                             MLX5_RXQ_TYPE_HAIRPIN)
5074                                 qrss = NULL;
5075                 } else if (qrss->type == RTE_FLOW_ACTION_TYPE_RSS) {
5076                         const struct rte_flow_action_rss *rss;
5077
5078                         rss = qrss->conf;
5079                         if (mlx5_rxq_get_type(dev, rss->queue[0]) ==
5080                             MLX5_RXQ_TYPE_HAIRPIN)
5081                                 qrss = NULL;
5082                 }
5083         }
5084         if (qrss) {
5085                 /* Check if it is in meter suffix table. */
5086                 mtr_sfx = attr->group == (attr->transfer ?
5087                           (MLX5_FLOW_TABLE_LEVEL_SUFFIX - 1) :
5088                           MLX5_FLOW_TABLE_LEVEL_SUFFIX);
5089                 /*
5090                  * Q/RSS action on NIC Rx should be split in order to pass by
5091                  * the mreg copy table (RX_CP_TBL) and then it jumps to the
5092                  * action table (RX_ACT_TBL) which has the split Q/RSS action.
5093                  */
5094                 act_size = sizeof(struct rte_flow_action) * (actions_n + 1) +
5095                            sizeof(struct rte_flow_action_set_tag) +
5096                            sizeof(struct rte_flow_action_jump);
5097                 ext_actions = mlx5_malloc(MLX5_MEM_ZERO, act_size, 0,
5098                                           SOCKET_ID_ANY);
5099                 if (!ext_actions)
5100                         return rte_flow_error_set(error, ENOMEM,
5101                                                   RTE_FLOW_ERROR_TYPE_ACTION,
5102                                                   NULL, "no memory to split "
5103                                                   "metadata flow");
5104                 /*
5105                  * If we are the suffix flow of meter, tag already exist.
5106                  * Set the tag action to void.
5107                  */
5108                 if (mtr_sfx)
5109                         ext_actions[qrss - actions].type =
5110                                                 RTE_FLOW_ACTION_TYPE_VOID;
5111                 else
5112                         ext_actions[qrss - actions].type =
5113                                                 (enum rte_flow_action_type)
5114                                                 MLX5_RTE_FLOW_ACTION_TYPE_TAG;
5115                 /*
5116                  * Create the new actions list with removed Q/RSS action
5117                  * and appended set tag and jump to register copy table
5118                  * (RX_CP_TBL). We should preallocate unique tag ID here
5119                  * in advance, because it is needed for set tag action.
5120                  */
5121                 qrss_id = flow_mreg_split_qrss_prep(dev, ext_actions, actions,
5122                                                     qrss, actions_n, error);
5123                 if (!mtr_sfx && !qrss_id) {
5124                         ret = -rte_errno;
5125                         goto exit;
5126                 }
5127         } else if (attr->egress && !attr->transfer) {
5128                 /*
5129                  * All the actions on NIC Tx should have a metadata register
5130                  * copy action to copy reg_a from WQE to reg_c[meta]
5131                  */
5132                 act_size = sizeof(struct rte_flow_action) * (actions_n + 1) +
5133                            sizeof(struct mlx5_flow_action_copy_mreg);
5134                 ext_actions = mlx5_malloc(MLX5_MEM_ZERO, act_size, 0,
5135                                           SOCKET_ID_ANY);
5136                 if (!ext_actions)
5137                         return rte_flow_error_set(error, ENOMEM,
5138                                                   RTE_FLOW_ERROR_TYPE_ACTION,
5139                                                   NULL, "no memory to split "
5140                                                   "metadata flow");
5141                 /* Create the action list appended with copy register. */
5142                 ret = flow_mreg_tx_copy_prep(dev, ext_actions, actions,
5143                                              actions_n, error, encap_idx);
5144                 if (ret < 0)
5145                         goto exit;
5146         }
5147         /* Add the unmodified original or prefix subflow. */
5148         ret = flow_create_split_inner(dev, flow, &dev_flow, attr,
5149                                       items, ext_actions ? ext_actions :
5150                                       actions, flow_split_info, error);
5151         if (ret < 0)
5152                 goto exit;
5153         MLX5_ASSERT(dev_flow);
5154         if (qrss) {
5155                 const struct rte_flow_attr q_attr = {
5156                         .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
5157                         .ingress = 1,
5158                 };
5159                 /* Internal PMD action to set register. */
5160                 struct mlx5_rte_flow_item_tag q_tag_spec = {
5161                         .data = qrss_id,
5162                         .id = REG_NON,
5163                 };
5164                 struct rte_flow_item q_items[] = {
5165                         {
5166                                 .type = (enum rte_flow_item_type)
5167                                         MLX5_RTE_FLOW_ITEM_TYPE_TAG,
5168                                 .spec = &q_tag_spec,
5169                                 .last = NULL,
5170                                 .mask = NULL,
5171                         },
5172                         {
5173                                 .type = RTE_FLOW_ITEM_TYPE_END,
5174                         },
5175                 };
5176                 struct rte_flow_action q_actions[] = {
5177                         {
5178                                 .type = qrss->type,
5179                                 .conf = qrss->conf,
5180                         },
5181                         {
5182                                 .type = RTE_FLOW_ACTION_TYPE_END,
5183                         },
5184                 };
5185                 uint64_t layers = flow_get_prefix_layer_flags(dev_flow);
5186
5187                 /*
5188                  * Configure the tag item only if there is no meter subflow.
5189                  * Since tag is already marked in the meter suffix subflow
5190                  * we can just use the meter suffix items as is.
5191                  */
5192                 if (qrss_id) {
5193                         /* Not meter subflow. */
5194                         MLX5_ASSERT(!mtr_sfx);
5195                         /*
5196                          * Put unique id in prefix flow due to it is destroyed
5197                          * after suffix flow and id will be freed after there
5198                          * is no actual flows with this id and identifier
5199                          * reallocation becomes possible (for example, for
5200                          * other flows in other threads).
5201                          */
5202                         dev_flow->handle->split_flow_id = qrss_id;
5203                         ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0,
5204                                                    error);
5205                         if (ret < 0)
5206                                 goto exit;
5207                         q_tag_spec.id = ret;
5208                 }
5209                 dev_flow = NULL;
5210                 /* Add suffix subflow to execute Q/RSS. */
5211                 flow_split_info->prefix_layers = layers;
5212                 flow_split_info->prefix_mark = 0;
5213                 ret = flow_create_split_inner(dev, flow, &dev_flow,
5214                                               &q_attr, mtr_sfx ? items :
5215                                               q_items, q_actions,
5216                                               flow_split_info, error);
5217                 if (ret < 0)
5218                         goto exit;
5219                 /* qrss ID should be freed if failed. */
5220                 qrss_id = 0;
5221                 MLX5_ASSERT(dev_flow);
5222         }
5223
5224 exit:
5225         /*
5226          * We do not destroy the partially created sub_flows in case of error.
5227          * These ones are included into parent flow list and will be destroyed
5228          * by flow_drv_destroy.
5229          */
5230         mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_RSS_EXPANTION_FLOW_ID],
5231                         qrss_id);
5232         mlx5_free(ext_actions);
5233         return ret;
5234 }
5235
5236 /**
5237  * The splitting for meter feature.
5238  *
5239  * - The meter flow will be split to two flows as prefix and
5240  *   suffix flow. The packets make sense only it pass the prefix
5241  *   meter action.
5242  *
5243  * - Reg_C_5 is used for the packet to match betweend prefix and
5244  *   suffix flow.
5245  *
5246  * @param dev
5247  *   Pointer to Ethernet device.
5248  * @param[in] flow
5249  *   Parent flow structure pointer.
5250  * @param[in] attr
5251  *   Flow rule attributes.
5252  * @param[in] items
5253  *   Pattern specification (list terminated by the END pattern item).
5254  * @param[in] actions
5255  *   Associated actions (list terminated by the END action).
5256  * @param[in] flow_split_info
5257  *   Pointer to flow split info structure.
5258  * @param[out] error
5259  *   Perform verbose error reporting if not NULL.
5260  * @return
5261  *   0 on success, negative value otherwise
5262  */
5263 static int
5264 flow_create_split_meter(struct rte_eth_dev *dev,
5265                         struct rte_flow *flow,
5266                         const struct rte_flow_attr *attr,
5267                         const struct rte_flow_item items[],
5268                         const struct rte_flow_action actions[],
5269                         struct mlx5_flow_split_info *flow_split_info,
5270                         struct rte_flow_error *error)
5271 {
5272         struct mlx5_priv *priv = dev->data->dev_private;
5273         struct mlx5_flow_workspace *wks = mlx5_flow_get_thread_workspace();
5274         struct rte_flow_action *sfx_actions = NULL;
5275         struct rte_flow_action *pre_actions = NULL;
5276         struct rte_flow_item *sfx_items = NULL;
5277         struct mlx5_flow *dev_flow = NULL;
5278         struct rte_flow_attr sfx_attr = *attr;
5279         struct mlx5_flow_meter_info *fm = NULL;
5280         bool has_mtr = false;
5281         uint32_t meter_id;
5282         uint32_t mtr_idx = 0;
5283         uint32_t mtr_tag_id = 0;
5284         size_t act_size;
5285         size_t item_size;
5286         int actions_n = 0;
5287         int ret = 0;
5288
5289         if (priv->mtr_en)
5290                 actions_n = flow_check_meter_action(actions, &has_mtr,
5291                                                     &meter_id);
5292         if (has_mtr) {
5293                 if (flow->meter) {
5294                         fm = flow_dv_meter_find_by_idx(priv, flow->meter);
5295                         if (!fm)
5296                                 return rte_flow_error_set(error, EINVAL,
5297                                                 RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
5298                                                 NULL, "Meter not found.");
5299                 } else {
5300                         fm = mlx5_flow_meter_find(priv, meter_id, &mtr_idx);
5301                         if (!fm)
5302                                 return rte_flow_error_set(error, EINVAL,
5303                                                 RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
5304                                                 NULL, "Meter not found.");
5305                         ret = mlx5_flow_meter_attach(priv, fm,
5306                                                      &sfx_attr, error);
5307                         if (ret)
5308                                 return -rte_errno;
5309                         flow->meter = mtr_idx;
5310                 }
5311                 wks->fm = fm;
5312                 /* Prefix actions: meter, decap, encap, tag, jump, end. */
5313                 act_size = sizeof(struct rte_flow_action) * (actions_n + 6) +
5314                            sizeof(struct mlx5_rte_flow_action_set_tag) +
5315                            sizeof(struct rte_flow_action_jump);
5316                 /* Suffix items: tag, vlan, port id, end. */
5317 #define METER_SUFFIX_ITEM 4
5318                 item_size = sizeof(struct rte_flow_item) * METER_SUFFIX_ITEM +
5319                             sizeof(struct mlx5_rte_flow_item_tag) * 2;
5320                 sfx_actions = mlx5_malloc(MLX5_MEM_ZERO, (act_size + item_size),
5321                                           0, SOCKET_ID_ANY);
5322                 if (!sfx_actions)
5323                         return rte_flow_error_set(error, ENOMEM,
5324                                                   RTE_FLOW_ERROR_TYPE_ACTION,
5325                                                   NULL, "no memory to split "
5326                                                   "meter flow");
5327                 sfx_items = (struct rte_flow_item *)((char *)sfx_actions +
5328                              act_size);
5329                 pre_actions = sfx_actions + actions_n;
5330                 mtr_tag_id = flow_meter_split_prep(dev, flow, fm, &sfx_attr,
5331                                                    items, sfx_items, actions,
5332                                                    sfx_actions, pre_actions,
5333                                                    error);
5334                 if (!mtr_tag_id) {
5335                         ret = -rte_errno;
5336                         goto exit;
5337                 }
5338                 /* Add the prefix subflow. */
5339                 flow_split_info->prefix_mark = 0;
5340                 ret = flow_create_split_inner(dev, flow, &dev_flow,
5341                                               attr, items, pre_actions,
5342                                               flow_split_info, error);
5343                 if (ret) {
5344                         mlx5_ipool_free(fm->flow_ipool, mtr_tag_id);
5345                         ret = -rte_errno;
5346                         goto exit;
5347                 }
5348                 dev_flow->handle->split_flow_id = mtr_tag_id;
5349                 dev_flow->handle->is_meter_flow_id = 1;
5350                 /* Setting the sfx group atrr. */
5351                 sfx_attr.group = sfx_attr.transfer ?
5352                                 (MLX5_FLOW_TABLE_LEVEL_SUFFIX - 1) :
5353                                  MLX5_FLOW_TABLE_LEVEL_SUFFIX;
5354                 flow_split_info->prefix_layers =
5355                                 flow_get_prefix_layer_flags(dev_flow);
5356                 flow_split_info->prefix_mark = dev_flow->handle->mark;
5357         }
5358         /* Add the prefix subflow. */
5359         ret = flow_create_split_metadata(dev, flow,
5360                                          &sfx_attr, sfx_items ?
5361                                          sfx_items : items,
5362                                          sfx_actions ? sfx_actions : actions,
5363                                          flow_split_info, error);
5364 exit:
5365         if (sfx_actions)
5366                 mlx5_free(sfx_actions);
5367         return ret;
5368 }
5369
5370 /**
5371  * The splitting for sample feature.
5372  *
5373  * Once Sample action is detected in the action list, the flow actions should
5374  * be split into prefix sub flow and suffix sub flow.
5375  *
5376  * The original items remain in the prefix sub flow, all actions preceding the
5377  * sample action and the sample action itself will be copied to the prefix
5378  * sub flow, the actions following the sample action will be copied to the
5379  * suffix sub flow, Queue action always be located in the suffix sub flow.
5380  *
5381  * In order to make the packet from prefix sub flow matches with suffix sub
5382  * flow, an extra tag action be added into prefix sub flow, and the suffix sub
5383  * flow uses tag item with the unique flow id.
5384  *
5385  * @param dev
5386  *   Pointer to Ethernet device.
5387  * @param[in] flow
5388  *   Parent flow structure pointer.
5389  * @param[in] attr
5390  *   Flow rule attributes.
5391  * @param[in] items
5392  *   Pattern specification (list terminated by the END pattern item).
5393  * @param[in] actions
5394  *   Associated actions (list terminated by the END action).
5395  * @param[in] flow_split_info
5396  *   Pointer to flow split info structure.
5397  * @param[out] error
5398  *   Perform verbose error reporting if not NULL.
5399  * @return
5400  *   0 on success, negative value otherwise
5401  */
5402 static int
5403 flow_create_split_sample(struct rte_eth_dev *dev,
5404                          struct rte_flow *flow,
5405                          const struct rte_flow_attr *attr,
5406                          const struct rte_flow_item items[],
5407                          const struct rte_flow_action actions[],
5408                          struct mlx5_flow_split_info *flow_split_info,
5409                          struct rte_flow_error *error)
5410 {
5411         struct mlx5_priv *priv = dev->data->dev_private;
5412         struct rte_flow_action *sfx_actions = NULL;
5413         struct rte_flow_action *pre_actions = NULL;
5414         struct rte_flow_item *sfx_items = NULL;
5415         struct mlx5_flow *dev_flow = NULL;
5416         struct rte_flow_attr sfx_attr = *attr;
5417 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
5418         struct mlx5_flow_dv_sample_resource *sample_res;
5419         struct mlx5_flow_tbl_data_entry *sfx_tbl_data;
5420         struct mlx5_flow_tbl_resource *sfx_tbl;
5421 #endif
5422         size_t act_size;
5423         size_t item_size;
5424         uint32_t fdb_tx = 0;
5425         int32_t tag_id = 0;
5426         int actions_n = 0;
5427         int sample_action_pos;
5428         int qrss_action_pos;
5429         int add_tag = 0;
5430         int modify_after_mirror = 0;
5431         uint16_t jump_table = 0;
5432         const uint32_t next_ft_step = 1;
5433         int ret = 0;
5434
5435         if (priv->sampler_en)
5436                 actions_n = flow_check_match_action(actions, attr,
5437                                         RTE_FLOW_ACTION_TYPE_SAMPLE,
5438                                         &sample_action_pos, &qrss_action_pos,
5439                                         &modify_after_mirror);
5440         if (actions_n) {
5441                 /* The prefix actions must includes sample, tag, end. */
5442                 act_size = sizeof(struct rte_flow_action) * (actions_n * 2 + 1)
5443                            + sizeof(struct mlx5_rte_flow_action_set_tag);
5444                 item_size = sizeof(struct rte_flow_item) * SAMPLE_SUFFIX_ITEM +
5445                             sizeof(struct mlx5_rte_flow_item_tag) * 2;
5446                 sfx_actions = mlx5_malloc(MLX5_MEM_ZERO, (act_size +
5447                                           item_size), 0, SOCKET_ID_ANY);
5448                 if (!sfx_actions)
5449                         return rte_flow_error_set(error, ENOMEM,
5450                                                   RTE_FLOW_ERROR_TYPE_ACTION,
5451                                                   NULL, "no memory to split "
5452                                                   "sample flow");
5453                 /* The representor_id is -1 for uplink. */
5454                 fdb_tx = (attr->transfer && priv->representor_id != -1);
5455                 /*
5456                  * When reg_c_preserve is set, metadata registers Cx preserve
5457                  * their value even through packet duplication.
5458                  */
5459                 add_tag = (!fdb_tx || priv->config.hca_attr.reg_c_preserve);
5460                 if (add_tag)
5461                         sfx_items = (struct rte_flow_item *)((char *)sfx_actions
5462                                         + act_size);
5463                 if (modify_after_mirror)
5464                         jump_table = attr->group * MLX5_FLOW_TABLE_FACTOR +
5465                                      next_ft_step;
5466                 pre_actions = sfx_actions + actions_n;
5467                 tag_id = flow_sample_split_prep(dev, add_tag, sfx_items,
5468                                                 actions, sfx_actions,
5469                                                 pre_actions, actions_n,
5470                                                 sample_action_pos,
5471                                                 qrss_action_pos, jump_table,
5472                                                 error);
5473                 if (tag_id < 0 || (add_tag && !tag_id)) {
5474                         ret = -rte_errno;
5475                         goto exit;
5476                 }
5477                 if (modify_after_mirror)
5478                         flow_split_info->skip_scale =
5479                                         1 << MLX5_SCALE_JUMP_FLOW_GROUP_BIT;
5480                 /* Add the prefix subflow. */
5481                 ret = flow_create_split_inner(dev, flow, &dev_flow, attr,
5482                                               items, pre_actions,
5483                                               flow_split_info, error);
5484                 if (ret) {
5485                         ret = -rte_errno;
5486                         goto exit;
5487                 }
5488                 dev_flow->handle->split_flow_id = tag_id;
5489 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
5490                 if (!modify_after_mirror) {
5491                         /* Set the sfx group attr. */
5492                         sample_res = (struct mlx5_flow_dv_sample_resource *)
5493                                                 dev_flow->dv.sample_res;
5494                         sfx_tbl = (struct mlx5_flow_tbl_resource *)
5495                                                 sample_res->normal_path_tbl;
5496                         sfx_tbl_data = container_of(sfx_tbl,
5497                                                 struct mlx5_flow_tbl_data_entry,
5498                                                 tbl);
5499                         sfx_attr.group = sfx_attr.transfer ?
5500                                                 (sfx_tbl_data->table_id - 1) :
5501                                                 sfx_tbl_data->table_id;
5502                 } else {
5503                         MLX5_ASSERT(attr->transfer);
5504                         sfx_attr.group = jump_table;
5505                 }
5506                 flow_split_info->prefix_layers =
5507                                 flow_get_prefix_layer_flags(dev_flow);
5508                 flow_split_info->prefix_mark = dev_flow->handle->mark;
5509                 /* Suffix group level already be scaled with factor, set
5510                  * MLX5_SCALE_FLOW_GROUP_BIT of skip_scale to 1 to avoid scale
5511                  * again in translation.
5512                  */
5513                 flow_split_info->skip_scale = 1 << MLX5_SCALE_FLOW_GROUP_BIT;
5514 #endif
5515         }
5516         /* Add the suffix subflow. */
5517         ret = flow_create_split_meter(dev, flow, &sfx_attr,
5518                                       sfx_items ? sfx_items : items,
5519                                       sfx_actions ? sfx_actions : actions,
5520                                       flow_split_info, error);
5521 exit:
5522         if (sfx_actions)
5523                 mlx5_free(sfx_actions);
5524         return ret;
5525 }
5526
5527 /**
5528  * Split the flow to subflow set. The splitters might be linked
5529  * in the chain, like this:
5530  * flow_create_split_outer() calls:
5531  *   flow_create_split_meter() calls:
5532  *     flow_create_split_metadata(meter_subflow_0) calls:
5533  *       flow_create_split_inner(metadata_subflow_0)
5534  *       flow_create_split_inner(metadata_subflow_1)
5535  *       flow_create_split_inner(metadata_subflow_2)
5536  *     flow_create_split_metadata(meter_subflow_1) calls:
5537  *       flow_create_split_inner(metadata_subflow_0)
5538  *       flow_create_split_inner(metadata_subflow_1)
5539  *       flow_create_split_inner(metadata_subflow_2)
5540  *
5541  * This provide flexible way to add new levels of flow splitting.
5542  * The all of successfully created subflows are included to the
5543  * parent flow dev_flow list.
5544  *
5545  * @param dev
5546  *   Pointer to Ethernet device.
5547  * @param[in] flow
5548  *   Parent flow structure pointer.
5549  * @param[in] attr
5550  *   Flow rule attributes.
5551  * @param[in] items
5552  *   Pattern specification (list terminated by the END pattern item).
5553  * @param[in] actions
5554  *   Associated actions (list terminated by the END action).
5555  * @param[in] flow_split_info
5556  *   Pointer to flow split info structure.
5557  * @param[out] error
5558  *   Perform verbose error reporting if not NULL.
5559  * @return
5560  *   0 on success, negative value otherwise
5561  */
5562 static int
5563 flow_create_split_outer(struct rte_eth_dev *dev,
5564                         struct rte_flow *flow,
5565                         const struct rte_flow_attr *attr,
5566                         const struct rte_flow_item items[],
5567                         const struct rte_flow_action actions[],
5568                         struct mlx5_flow_split_info *flow_split_info,
5569                         struct rte_flow_error *error)
5570 {
5571         int ret;
5572
5573         ret = flow_create_split_sample(dev, flow, attr, items,
5574                                        actions, flow_split_info, error);
5575         MLX5_ASSERT(ret <= 0);
5576         return ret;
5577 }
5578
5579 static struct mlx5_flow_tunnel *
5580 flow_tunnel_from_rule(struct rte_eth_dev *dev,
5581                       const struct rte_flow_attr *attr,
5582                       const struct rte_flow_item items[],
5583                       const struct rte_flow_action actions[])
5584 {
5585         struct mlx5_flow_tunnel *tunnel;
5586
5587 #pragma GCC diagnostic push
5588 #pragma GCC diagnostic ignored "-Wcast-qual"
5589         if (is_flow_tunnel_match_rule(dev, attr, items, actions))
5590                 tunnel = (struct mlx5_flow_tunnel *)items[0].spec;
5591         else if (is_flow_tunnel_steer_rule(dev, attr, items, actions))
5592                 tunnel = (struct mlx5_flow_tunnel *)actions[0].conf;
5593         else
5594                 tunnel = NULL;
5595 #pragma GCC diagnostic pop
5596
5597         return tunnel;
5598 }
5599
5600 /**
5601  * Adjust flow RSS workspace if needed.
5602  *
5603  * @param wks
5604  *   Pointer to thread flow work space.
5605  * @param rss_desc
5606  *   Pointer to RSS descriptor.
5607  * @param[in] nrssq_num
5608  *   New RSS queue number.
5609  *
5610  * @return
5611  *   0 on success, -1 otherwise and rte_errno is set.
5612  */
5613 static int
5614 flow_rss_workspace_adjust(struct mlx5_flow_workspace *wks,
5615                           struct mlx5_flow_rss_desc *rss_desc,
5616                           uint32_t nrssq_num)
5617 {
5618         if (likely(nrssq_num <= wks->rssq_num))
5619                 return 0;
5620         rss_desc->queue = realloc(rss_desc->queue,
5621                           sizeof(*rss_desc->queue) * RTE_ALIGN(nrssq_num, 2));
5622         if (!rss_desc->queue) {
5623                 rte_errno = ENOMEM;
5624                 return -1;
5625         }
5626         wks->rssq_num = RTE_ALIGN(nrssq_num, 2);
5627         return 0;
5628 }
5629
5630 /**
5631  * Create a flow and add it to @p list.
5632  *
5633  * @param dev
5634  *   Pointer to Ethernet device.
5635  * @param list
5636  *   Pointer to a TAILQ flow list. If this parameter NULL,
5637  *   no list insertion occurred, flow is just created,
5638  *   this is caller's responsibility to track the
5639  *   created flow.
5640  * @param[in] attr
5641  *   Flow rule attributes.
5642  * @param[in] items
5643  *   Pattern specification (list terminated by the END pattern item).
5644  * @param[in] actions
5645  *   Associated actions (list terminated by the END action).
5646  * @param[in] external
5647  *   This flow rule is created by request external to PMD.
5648  * @param[out] error
5649  *   Perform verbose error reporting if not NULL.
5650  *
5651  * @return
5652  *   A flow index on success, 0 otherwise and rte_errno is set.
5653  */
5654 static uint32_t
5655 flow_list_create(struct rte_eth_dev *dev, uint32_t *list,
5656                  const struct rte_flow_attr *attr,
5657                  const struct rte_flow_item items[],
5658                  const struct rte_flow_action original_actions[],
5659                  bool external, struct rte_flow_error *error)
5660 {
5661         struct mlx5_priv *priv = dev->data->dev_private;
5662         struct rte_flow *flow = NULL;
5663         struct mlx5_flow *dev_flow;
5664         const struct rte_flow_action_rss *rss = NULL;
5665         struct mlx5_translated_action_handle
5666                 indir_actions[MLX5_MAX_INDIRECT_ACTIONS];
5667         int indir_actions_n = MLX5_MAX_INDIRECT_ACTIONS;
5668         union {
5669                 struct mlx5_flow_expand_rss buf;
5670                 uint8_t buffer[2048];
5671         } expand_buffer;
5672         union {
5673                 struct rte_flow_action actions[MLX5_MAX_SPLIT_ACTIONS];
5674                 uint8_t buffer[2048];
5675         } actions_rx;
5676         union {
5677                 struct rte_flow_action actions[MLX5_MAX_SPLIT_ACTIONS];
5678                 uint8_t buffer[2048];
5679         } actions_hairpin_tx;
5680         union {
5681                 struct rte_flow_item items[MLX5_MAX_SPLIT_ITEMS];
5682                 uint8_t buffer[2048];
5683         } items_tx;
5684         struct mlx5_flow_expand_rss *buf = &expand_buffer.buf;
5685         struct mlx5_flow_rss_desc *rss_desc;
5686         const struct rte_flow_action *p_actions_rx;
5687         uint32_t i;
5688         uint32_t idx = 0;
5689         int hairpin_flow;
5690         struct rte_flow_attr attr_tx = { .priority = 0 };
5691         const struct rte_flow_action *actions;
5692         struct rte_flow_action *translated_actions = NULL;
5693         struct mlx5_flow_tunnel *tunnel;
5694         struct tunnel_default_miss_ctx default_miss_ctx = { 0, };
5695         struct mlx5_flow_workspace *wks = mlx5_flow_push_thread_workspace();
5696         struct mlx5_flow_split_info flow_split_info = {
5697                 .external = !!external,
5698                 .skip_scale = 0,
5699                 .flow_idx = 0,
5700                 .prefix_mark = 0,
5701                 .prefix_layers = 0
5702         };
5703         int ret;
5704
5705         MLX5_ASSERT(wks);
5706         rss_desc = &wks->rss_desc;
5707         ret = flow_action_handles_translate(dev, original_actions,
5708                                             indir_actions,
5709                                             &indir_actions_n,
5710                                             &translated_actions, error);
5711         if (ret < 0) {
5712                 MLX5_ASSERT(translated_actions == NULL);
5713                 return 0;
5714         }
5715         actions = translated_actions ? translated_actions : original_actions;
5716         p_actions_rx = actions;
5717         hairpin_flow = flow_check_hairpin_split(dev, attr, actions);
5718         ret = flow_drv_validate(dev, attr, items, p_actions_rx,
5719                                 external, hairpin_flow, error);
5720         if (ret < 0)
5721                 goto error_before_hairpin_split;
5722         flow = mlx5_ipool_zmalloc(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], &idx);
5723         if (!flow) {
5724                 rte_errno = ENOMEM;
5725                 goto error_before_hairpin_split;
5726         }
5727         if (hairpin_flow > 0) {
5728                 if (hairpin_flow > MLX5_MAX_SPLIT_ACTIONS) {
5729                         rte_errno = EINVAL;
5730                         goto error_before_hairpin_split;
5731                 }
5732                 flow_hairpin_split(dev, actions, actions_rx.actions,
5733                                    actions_hairpin_tx.actions, items_tx.items,
5734                                    idx);
5735                 p_actions_rx = actions_rx.actions;
5736         }
5737         flow_split_info.flow_idx = idx;
5738         flow->drv_type = flow_get_drv_type(dev, attr);
5739         MLX5_ASSERT(flow->drv_type > MLX5_FLOW_TYPE_MIN &&
5740                     flow->drv_type < MLX5_FLOW_TYPE_MAX);
5741         memset(rss_desc, 0, offsetof(struct mlx5_flow_rss_desc, queue));
5742         /* RSS Action only works on NIC RX domain */
5743         if (attr->ingress && !attr->transfer)
5744                 rss = flow_get_rss_action(p_actions_rx);
5745         if (rss) {
5746                 if (flow_rss_workspace_adjust(wks, rss_desc, rss->queue_num))
5747                         return 0;
5748                 /*
5749                  * The following information is required by
5750                  * mlx5_flow_hashfields_adjust() in advance.
5751                  */
5752                 rss_desc->level = rss->level;
5753                 /* RSS type 0 indicates default RSS type (ETH_RSS_IP). */
5754                 rss_desc->types = !rss->types ? ETH_RSS_IP : rss->types;
5755         }
5756         flow->dev_handles = 0;
5757         if (rss && rss->types) {
5758                 unsigned int graph_root;
5759
5760                 graph_root = find_graph_root(items, rss->level);
5761                 ret = mlx5_flow_expand_rss(buf, sizeof(expand_buffer.buffer),
5762                                            items, rss->types,
5763                                            mlx5_support_expansion, graph_root);
5764                 MLX5_ASSERT(ret > 0 &&
5765                        (unsigned int)ret < sizeof(expand_buffer.buffer));
5766         } else {
5767                 buf->entries = 1;
5768                 buf->entry[0].pattern = (void *)(uintptr_t)items;
5769         }
5770         rss_desc->shared_rss = flow_get_shared_rss_action(dev, indir_actions,
5771                                                       indir_actions_n);
5772         for (i = 0; i < buf->entries; ++i) {
5773                 /* Initialize flow split data. */
5774                 flow_split_info.prefix_layers = 0;
5775                 flow_split_info.prefix_mark = 0;
5776                 flow_split_info.skip_scale = 0;
5777                 /*
5778                  * The splitter may create multiple dev_flows,
5779                  * depending on configuration. In the simplest
5780                  * case it just creates unmodified original flow.
5781                  */
5782                 ret = flow_create_split_outer(dev, flow, attr,
5783                                               buf->entry[i].pattern,
5784                                               p_actions_rx, &flow_split_info,
5785                                               error);
5786                 if (ret < 0)
5787                         goto error;
5788                 if (is_flow_tunnel_steer_rule(dev, attr,
5789                                               buf->entry[i].pattern,
5790                                               p_actions_rx)) {
5791                         ret = flow_tunnel_add_default_miss(dev, flow, attr,
5792                                                            p_actions_rx,
5793                                                            idx,
5794                                                            &default_miss_ctx,
5795                                                            error);
5796                         if (ret < 0) {
5797                                 mlx5_free(default_miss_ctx.queue);
5798                                 goto error;
5799                         }
5800                 }
5801         }
5802         /* Create the tx flow. */
5803         if (hairpin_flow) {
5804                 attr_tx.group = MLX5_HAIRPIN_TX_TABLE;
5805                 attr_tx.ingress = 0;
5806                 attr_tx.egress = 1;
5807                 dev_flow = flow_drv_prepare(dev, flow, &attr_tx, items_tx.items,
5808                                          actions_hairpin_tx.actions,
5809                                          idx, error);
5810                 if (!dev_flow)
5811                         goto error;
5812                 dev_flow->flow = flow;
5813                 dev_flow->external = 0;
5814                 SILIST_INSERT(&flow->dev_handles, dev_flow->handle_idx,
5815                               dev_flow->handle, next);
5816                 ret = flow_drv_translate(dev, dev_flow, &attr_tx,
5817                                          items_tx.items,
5818                                          actions_hairpin_tx.actions, error);
5819                 if (ret < 0)
5820                         goto error;
5821         }
5822         /*
5823          * Update the metadata register copy table. If extensive
5824          * metadata feature is enabled and registers are supported
5825          * we might create the extra rte_flow for each unique
5826          * MARK/FLAG action ID.
5827          *
5828          * The table is updated for ingress Flows only, because
5829          * the egress Flows belong to the different device and
5830          * copy table should be updated in peer NIC Rx domain.
5831          */
5832         if (attr->ingress &&
5833             (external || attr->group != MLX5_FLOW_MREG_CP_TABLE_GROUP)) {
5834                 ret = flow_mreg_update_copy_table(dev, flow, actions, error);
5835                 if (ret)
5836                         goto error;
5837         }
5838         /*
5839          * If the flow is external (from application) OR device is started,
5840          * OR mreg discover, then apply immediately.
5841          */
5842         if (external || dev->data->dev_started ||
5843             (attr->group == MLX5_FLOW_MREG_CP_TABLE_GROUP &&
5844              attr->priority == MLX5_FLOW_LOWEST_PRIO_INDICATOR)) {
5845                 ret = flow_drv_apply(dev, flow, error);
5846                 if (ret < 0)
5847                         goto error;
5848         }
5849         if (list) {
5850                 rte_spinlock_lock(&priv->flow_list_lock);
5851                 ILIST_INSERT(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], list, idx,
5852                              flow, next);
5853                 rte_spinlock_unlock(&priv->flow_list_lock);
5854         }
5855         flow_rxq_flags_set(dev, flow);
5856         rte_free(translated_actions);
5857         tunnel = flow_tunnel_from_rule(dev, attr, items, actions);
5858         if (tunnel) {
5859                 flow->tunnel = 1;
5860                 flow->tunnel_id = tunnel->tunnel_id;
5861                 __atomic_add_fetch(&tunnel->refctn, 1, __ATOMIC_RELAXED);
5862                 mlx5_free(default_miss_ctx.queue);
5863         }
5864         mlx5_flow_pop_thread_workspace();
5865         return idx;
5866 error:
5867         MLX5_ASSERT(flow);
5868         ret = rte_errno; /* Save rte_errno before cleanup. */
5869         flow_mreg_del_copy_action(dev, flow);
5870         flow_drv_destroy(dev, flow);
5871         if (rss_desc->shared_rss)
5872                 __atomic_sub_fetch(&((struct mlx5_shared_action_rss *)
5873                         mlx5_ipool_get
5874                         (priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
5875                         rss_desc->shared_rss))->refcnt, 1, __ATOMIC_RELAXED);
5876         mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], idx);
5877         rte_errno = ret; /* Restore rte_errno. */
5878         ret = rte_errno;
5879         rte_errno = ret;
5880         mlx5_flow_pop_thread_workspace();
5881 error_before_hairpin_split:
5882         rte_free(translated_actions);
5883         return 0;
5884 }
5885
5886 /**
5887  * Create a dedicated flow rule on e-switch table 0 (root table), to direct all
5888  * incoming packets to table 1.
5889  *
5890  * Other flow rules, requested for group n, will be created in
5891  * e-switch table n+1.
5892  * Jump action to e-switch group n will be created to group n+1.
5893  *
5894  * Used when working in switchdev mode, to utilise advantages of table 1
5895  * and above.
5896  *
5897  * @param dev
5898  *   Pointer to Ethernet device.
5899  *
5900  * @return
5901  *   Pointer to flow on success, NULL otherwise and rte_errno is set.
5902  */
5903 struct rte_flow *
5904 mlx5_flow_create_esw_table_zero_flow(struct rte_eth_dev *dev)
5905 {
5906         const struct rte_flow_attr attr = {
5907                 .group = 0,
5908                 .priority = 0,
5909                 .ingress = 1,
5910                 .egress = 0,
5911                 .transfer = 1,
5912         };
5913         const struct rte_flow_item pattern = {
5914                 .type = RTE_FLOW_ITEM_TYPE_END,
5915         };
5916         struct rte_flow_action_jump jump = {
5917                 .group = 1,
5918         };
5919         const struct rte_flow_action actions[] = {
5920                 {
5921                         .type = RTE_FLOW_ACTION_TYPE_JUMP,
5922                         .conf = &jump,
5923                 },
5924                 {
5925                         .type = RTE_FLOW_ACTION_TYPE_END,
5926                 },
5927         };
5928         struct mlx5_priv *priv = dev->data->dev_private;
5929         struct rte_flow_error error;
5930
5931         return (void *)(uintptr_t)flow_list_create(dev, &priv->ctrl_flows,
5932                                                    &attr, &pattern,
5933                                                    actions, false, &error);
5934 }
5935
5936 /**
5937  * Validate a flow supported by the NIC.
5938  *
5939  * @see rte_flow_validate()
5940  * @see rte_flow_ops
5941  */
5942 int
5943 mlx5_flow_validate(struct rte_eth_dev *dev,
5944                    const struct rte_flow_attr *attr,
5945                    const struct rte_flow_item items[],
5946                    const struct rte_flow_action original_actions[],
5947                    struct rte_flow_error *error)
5948 {
5949         int hairpin_flow;
5950         struct mlx5_translated_action_handle
5951                 indir_actions[MLX5_MAX_INDIRECT_ACTIONS];
5952         int indir_actions_n = MLX5_MAX_INDIRECT_ACTIONS;
5953         const struct rte_flow_action *actions;
5954         struct rte_flow_action *translated_actions = NULL;
5955         int ret = flow_action_handles_translate(dev, original_actions,
5956                                                 indir_actions,
5957                                                 &indir_actions_n,
5958                                                 &translated_actions, error);
5959
5960         if (ret)
5961                 return ret;
5962         actions = translated_actions ? translated_actions : original_actions;
5963         hairpin_flow = flow_check_hairpin_split(dev, attr, actions);
5964         ret = flow_drv_validate(dev, attr, items, actions,
5965                                 true, hairpin_flow, error);
5966         rte_free(translated_actions);
5967         return ret;
5968 }
5969
5970 /**
5971  * Create a flow.
5972  *
5973  * @see rte_flow_create()
5974  * @see rte_flow_ops
5975  */
5976 struct rte_flow *
5977 mlx5_flow_create(struct rte_eth_dev *dev,
5978                  const struct rte_flow_attr *attr,
5979                  const struct rte_flow_item items[],
5980                  const struct rte_flow_action actions[],
5981                  struct rte_flow_error *error)
5982 {
5983         struct mlx5_priv *priv = dev->data->dev_private;
5984
5985         /*
5986          * If the device is not started yet, it is not allowed to created a
5987          * flow from application. PMD default flows and traffic control flows
5988          * are not affected.
5989          */
5990         if (unlikely(!dev->data->dev_started)) {
5991                 DRV_LOG(DEBUG, "port %u is not started when "
5992                         "inserting a flow", dev->data->port_id);
5993                 rte_flow_error_set(error, ENODEV,
5994                                    RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
5995                                    NULL,
5996                                    "port not started");
5997                 return NULL;
5998         }
5999
6000         return (void *)(uintptr_t)flow_list_create(dev, &priv->flows,
6001                                   attr, items, actions, true, error);
6002 }
6003
6004 /**
6005  * Destroy a flow in a list.
6006  *
6007  * @param dev
6008  *   Pointer to Ethernet device.
6009  * @param list
6010  *   Pointer to the Indexed flow list. If this parameter NULL,
6011  *   there is no flow removal from the list. Be noted that as
6012  *   flow is add to the indexed list, memory of the indexed
6013  *   list points to maybe changed as flow destroyed.
6014  * @param[in] flow_idx
6015  *   Index of flow to destroy.
6016  */
6017 static void
6018 flow_list_destroy(struct rte_eth_dev *dev, uint32_t *list,
6019                   uint32_t flow_idx)
6020 {
6021         struct mlx5_priv *priv = dev->data->dev_private;
6022         struct rte_flow *flow = mlx5_ipool_get(priv->sh->ipool
6023                                                [MLX5_IPOOL_RTE_FLOW], flow_idx);
6024
6025         if (!flow)
6026                 return;
6027         /*
6028          * Update RX queue flags only if port is started, otherwise it is
6029          * already clean.
6030          */
6031         if (dev->data->dev_started)
6032                 flow_rxq_flags_trim(dev, flow);
6033         flow_drv_destroy(dev, flow);
6034         if (list) {
6035                 rte_spinlock_lock(&priv->flow_list_lock);
6036                 ILIST_REMOVE(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], list,
6037                              flow_idx, flow, next);
6038                 rte_spinlock_unlock(&priv->flow_list_lock);
6039         }
6040         if (flow->tunnel) {
6041                 struct mlx5_flow_tunnel *tunnel;
6042
6043                 tunnel = mlx5_find_tunnel_id(dev, flow->tunnel_id);
6044                 RTE_VERIFY(tunnel);
6045                 if (!__atomic_sub_fetch(&tunnel->refctn, 1, __ATOMIC_RELAXED))
6046                         mlx5_flow_tunnel_free(dev, tunnel);
6047         }
6048         flow_mreg_del_copy_action(dev, flow);
6049         mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], flow_idx);
6050 }
6051
6052 /**
6053  * Destroy all flows.
6054  *
6055  * @param dev
6056  *   Pointer to Ethernet device.
6057  * @param list
6058  *   Pointer to the Indexed flow list.
6059  * @param active
6060  *   If flushing is called avtively.
6061  */
6062 void
6063 mlx5_flow_list_flush(struct rte_eth_dev *dev, uint32_t *list, bool active)
6064 {
6065         uint32_t num_flushed = 0;
6066
6067         while (*list) {
6068                 flow_list_destroy(dev, list, *list);
6069                 num_flushed++;
6070         }
6071         if (active) {
6072                 DRV_LOG(INFO, "port %u: %u flows flushed before stopping",
6073                         dev->data->port_id, num_flushed);
6074         }
6075 }
6076
6077 /**
6078  * Stop all default actions for flows.
6079  *
6080  * @param dev
6081  *   Pointer to Ethernet device.
6082  */
6083 void
6084 mlx5_flow_stop_default(struct rte_eth_dev *dev)
6085 {
6086         flow_mreg_del_default_copy_action(dev);
6087         flow_rxq_flags_clear(dev);
6088 }
6089
6090 /**
6091  * Start all default actions for flows.
6092  *
6093  * @param dev
6094  *   Pointer to Ethernet device.
6095  * @return
6096  *   0 on success, a negative errno value otherwise and rte_errno is set.
6097  */
6098 int
6099 mlx5_flow_start_default(struct rte_eth_dev *dev)
6100 {
6101         struct rte_flow_error error;
6102
6103         /* Make sure default copy action (reg_c[0] -> reg_b) is created. */
6104         return flow_mreg_add_default_copy_action(dev, &error);
6105 }
6106
6107 /**
6108  * Release key of thread specific flow workspace data.
6109  */
6110 void
6111 flow_release_workspace(void *data)
6112 {
6113         struct mlx5_flow_workspace *wks = data;
6114         struct mlx5_flow_workspace *next;
6115
6116         while (wks) {
6117                 next = wks->next;
6118                 free(wks->rss_desc.queue);
6119                 free(wks);
6120                 wks = next;
6121         }
6122 }
6123
6124 /**
6125  * Get thread specific current flow workspace.
6126  *
6127  * @return pointer to thread specific flow workspace data, NULL on error.
6128  */
6129 struct mlx5_flow_workspace*
6130 mlx5_flow_get_thread_workspace(void)
6131 {
6132         struct mlx5_flow_workspace *data;
6133
6134         data = mlx5_flow_os_get_specific_workspace();
6135         MLX5_ASSERT(data && data->inuse);
6136         if (!data || !data->inuse)
6137                 DRV_LOG(ERR, "flow workspace not initialized.");
6138         return data;
6139 }
6140
6141 /**
6142  * Allocate and init new flow workspace.
6143  *
6144  * @return pointer to flow workspace data, NULL on error.
6145  */
6146 static struct mlx5_flow_workspace*
6147 flow_alloc_thread_workspace(void)
6148 {
6149         struct mlx5_flow_workspace *data = calloc(1, sizeof(*data));
6150
6151         if (!data) {
6152                 DRV_LOG(ERR, "Failed to allocate flow workspace "
6153                         "memory.");
6154                 return NULL;
6155         }
6156         data->rss_desc.queue = calloc(1,
6157                         sizeof(uint16_t) * MLX5_RSSQ_DEFAULT_NUM);
6158         if (!data->rss_desc.queue)
6159                 goto err;
6160         data->rssq_num = MLX5_RSSQ_DEFAULT_NUM;
6161         return data;
6162 err:
6163         if (data->rss_desc.queue)
6164                 free(data->rss_desc.queue);
6165         free(data);
6166         return NULL;
6167 }
6168
6169 /**
6170  * Get new thread specific flow workspace.
6171  *
6172  * If current workspace inuse, create new one and set as current.
6173  *
6174  * @return pointer to thread specific flow workspace data, NULL on error.
6175  */
6176 static struct mlx5_flow_workspace*
6177 mlx5_flow_push_thread_workspace(void)
6178 {
6179         struct mlx5_flow_workspace *curr;
6180         struct mlx5_flow_workspace *data;
6181
6182         curr = mlx5_flow_os_get_specific_workspace();
6183         if (!curr) {
6184                 data = flow_alloc_thread_workspace();
6185                 if (!data)
6186                         return NULL;
6187         } else if (!curr->inuse) {
6188                 data = curr;
6189         } else if (curr->next) {
6190                 data = curr->next;
6191         } else {
6192                 data = flow_alloc_thread_workspace();
6193                 if (!data)
6194                         return NULL;
6195                 curr->next = data;
6196                 data->prev = curr;
6197         }
6198         data->inuse = 1;
6199         data->flow_idx = 0;
6200         /* Set as current workspace */
6201         if (mlx5_flow_os_set_specific_workspace(data))
6202                 DRV_LOG(ERR, "Failed to set flow workspace to thread.");
6203         return data;
6204 }
6205
6206 /**
6207  * Close current thread specific flow workspace.
6208  *
6209  * If previous workspace available, set it as current.
6210  *
6211  * @return pointer to thread specific flow workspace data, NULL on error.
6212  */
6213 static void
6214 mlx5_flow_pop_thread_workspace(void)
6215 {
6216         struct mlx5_flow_workspace *data = mlx5_flow_get_thread_workspace();
6217
6218         if (!data)
6219                 return;
6220         if (!data->inuse) {
6221                 DRV_LOG(ERR, "Failed to close unused flow workspace.");
6222                 return;
6223         }
6224         data->inuse = 0;
6225         if (!data->prev)
6226                 return;
6227         if (mlx5_flow_os_set_specific_workspace(data->prev))
6228                 DRV_LOG(ERR, "Failed to set flow workspace to thread.");
6229 }
6230
6231 /**
6232  * Verify the flow list is empty
6233  *
6234  * @param dev
6235  *  Pointer to Ethernet device.
6236  *
6237  * @return the number of flows not released.
6238  */
6239 int
6240 mlx5_flow_verify(struct rte_eth_dev *dev)
6241 {
6242         struct mlx5_priv *priv = dev->data->dev_private;
6243         struct rte_flow *flow;
6244         uint32_t idx;
6245         int ret = 0;
6246
6247         ILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], priv->flows, idx,
6248                       flow, next) {
6249                 DRV_LOG(DEBUG, "port %u flow %p still referenced",
6250                         dev->data->port_id, (void *)flow);
6251                 ++ret;
6252         }
6253         return ret;
6254 }
6255
6256 /**
6257  * Enable default hairpin egress flow.
6258  *
6259  * @param dev
6260  *   Pointer to Ethernet device.
6261  * @param queue
6262  *   The queue index.
6263  *
6264  * @return
6265  *   0 on success, a negative errno value otherwise and rte_errno is set.
6266  */
6267 int
6268 mlx5_ctrl_flow_source_queue(struct rte_eth_dev *dev,
6269                             uint32_t queue)
6270 {
6271         struct mlx5_priv *priv = dev->data->dev_private;
6272         const struct rte_flow_attr attr = {
6273                 .egress = 1,
6274                 .priority = 0,
6275         };
6276         struct mlx5_rte_flow_item_tx_queue queue_spec = {
6277                 .queue = queue,
6278         };
6279         struct mlx5_rte_flow_item_tx_queue queue_mask = {
6280                 .queue = UINT32_MAX,
6281         };
6282         struct rte_flow_item items[] = {
6283                 {
6284                         .type = (enum rte_flow_item_type)
6285                                 MLX5_RTE_FLOW_ITEM_TYPE_TX_QUEUE,
6286                         .spec = &queue_spec,
6287                         .last = NULL,
6288                         .mask = &queue_mask,
6289                 },
6290                 {
6291                         .type = RTE_FLOW_ITEM_TYPE_END,
6292                 },
6293         };
6294         struct rte_flow_action_jump jump = {
6295                 .group = MLX5_HAIRPIN_TX_TABLE,
6296         };
6297         struct rte_flow_action actions[2];
6298         uint32_t flow_idx;
6299         struct rte_flow_error error;
6300
6301         actions[0].type = RTE_FLOW_ACTION_TYPE_JUMP;
6302         actions[0].conf = &jump;
6303         actions[1].type = RTE_FLOW_ACTION_TYPE_END;
6304         flow_idx = flow_list_create(dev, &priv->ctrl_flows,
6305                                 &attr, items, actions, false, &error);
6306         if (!flow_idx) {
6307                 DRV_LOG(DEBUG,
6308                         "Failed to create ctrl flow: rte_errno(%d),"
6309                         " type(%d), message(%s)",
6310                         rte_errno, error.type,
6311                         error.message ? error.message : " (no stated reason)");
6312                 return -rte_errno;
6313         }
6314         return 0;
6315 }
6316
6317 /**
6318  * Enable a control flow configured from the control plane.
6319  *
6320  * @param dev
6321  *   Pointer to Ethernet device.
6322  * @param eth_spec
6323  *   An Ethernet flow spec to apply.
6324  * @param eth_mask
6325  *   An Ethernet flow mask to apply.
6326  * @param vlan_spec
6327  *   A VLAN flow spec to apply.
6328  * @param vlan_mask
6329  *   A VLAN flow mask to apply.
6330  *
6331  * @return
6332  *   0 on success, a negative errno value otherwise and rte_errno is set.
6333  */
6334 int
6335 mlx5_ctrl_flow_vlan(struct rte_eth_dev *dev,
6336                     struct rte_flow_item_eth *eth_spec,
6337                     struct rte_flow_item_eth *eth_mask,
6338                     struct rte_flow_item_vlan *vlan_spec,
6339                     struct rte_flow_item_vlan *vlan_mask)
6340 {
6341         struct mlx5_priv *priv = dev->data->dev_private;
6342         const struct rte_flow_attr attr = {
6343                 .ingress = 1,
6344                 .priority = MLX5_FLOW_LOWEST_PRIO_INDICATOR,
6345         };
6346         struct rte_flow_item items[] = {
6347                 {
6348                         .type = RTE_FLOW_ITEM_TYPE_ETH,
6349                         .spec = eth_spec,
6350                         .last = NULL,
6351                         .mask = eth_mask,
6352                 },
6353                 {
6354                         .type = (vlan_spec) ? RTE_FLOW_ITEM_TYPE_VLAN :
6355                                               RTE_FLOW_ITEM_TYPE_END,
6356                         .spec = vlan_spec,
6357                         .last = NULL,
6358                         .mask = vlan_mask,
6359                 },
6360                 {
6361                         .type = RTE_FLOW_ITEM_TYPE_END,
6362                 },
6363         };
6364         uint16_t queue[priv->reta_idx_n];
6365         struct rte_flow_action_rss action_rss = {
6366                 .func = RTE_ETH_HASH_FUNCTION_DEFAULT,
6367                 .level = 0,
6368                 .types = priv->rss_conf.rss_hf,
6369                 .key_len = priv->rss_conf.rss_key_len,
6370                 .queue_num = priv->reta_idx_n,
6371                 .key = priv->rss_conf.rss_key,
6372                 .queue = queue,
6373         };
6374         struct rte_flow_action actions[] = {
6375                 {
6376                         .type = RTE_FLOW_ACTION_TYPE_RSS,
6377                         .conf = &action_rss,
6378                 },
6379                 {
6380                         .type = RTE_FLOW_ACTION_TYPE_END,
6381                 },
6382         };
6383         uint32_t flow_idx;
6384         struct rte_flow_error error;
6385         unsigned int i;
6386
6387         if (!priv->reta_idx_n || !priv->rxqs_n) {
6388                 return 0;
6389         }
6390         if (!(dev->data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_RSS_FLAG))
6391                 action_rss.types = 0;
6392         for (i = 0; i != priv->reta_idx_n; ++i)
6393                 queue[i] = (*priv->reta_idx)[i];
6394         flow_idx = flow_list_create(dev, &priv->ctrl_flows,
6395                                 &attr, items, actions, false, &error);
6396         if (!flow_idx)
6397                 return -rte_errno;
6398         return 0;
6399 }
6400
6401 /**
6402  * Enable a flow control configured from the control plane.
6403  *
6404  * @param dev
6405  *   Pointer to Ethernet device.
6406  * @param eth_spec
6407  *   An Ethernet flow spec to apply.
6408  * @param eth_mask
6409  *   An Ethernet flow mask to apply.
6410  *
6411  * @return
6412  *   0 on success, a negative errno value otherwise and rte_errno is set.
6413  */
6414 int
6415 mlx5_ctrl_flow(struct rte_eth_dev *dev,
6416                struct rte_flow_item_eth *eth_spec,
6417                struct rte_flow_item_eth *eth_mask)
6418 {
6419         return mlx5_ctrl_flow_vlan(dev, eth_spec, eth_mask, NULL, NULL);
6420 }
6421
6422 /**
6423  * Create default miss flow rule matching lacp traffic
6424  *
6425  * @param dev
6426  *   Pointer to Ethernet device.
6427  * @param eth_spec
6428  *   An Ethernet flow spec to apply.
6429  *
6430  * @return
6431  *   0 on success, a negative errno value otherwise and rte_errno is set.
6432  */
6433 int
6434 mlx5_flow_lacp_miss(struct rte_eth_dev *dev)
6435 {
6436         struct mlx5_priv *priv = dev->data->dev_private;
6437         /*
6438          * The LACP matching is done by only using ether type since using
6439          * a multicast dst mac causes kernel to give low priority to this flow.
6440          */
6441         static const struct rte_flow_item_eth lacp_spec = {
6442                 .type = RTE_BE16(0x8809),
6443         };
6444         static const struct rte_flow_item_eth lacp_mask = {
6445                 .type = 0xffff,
6446         };
6447         const struct rte_flow_attr attr = {
6448                 .ingress = 1,
6449         };
6450         struct rte_flow_item items[] = {
6451                 {
6452                         .type = RTE_FLOW_ITEM_TYPE_ETH,
6453                         .spec = &lacp_spec,
6454                         .mask = &lacp_mask,
6455                 },
6456                 {
6457                         .type = RTE_FLOW_ITEM_TYPE_END,
6458                 },
6459         };
6460         struct rte_flow_action actions[] = {
6461                 {
6462                         .type = (enum rte_flow_action_type)
6463                                 MLX5_RTE_FLOW_ACTION_TYPE_DEFAULT_MISS,
6464                 },
6465                 {
6466                         .type = RTE_FLOW_ACTION_TYPE_END,
6467                 },
6468         };
6469         struct rte_flow_error error;
6470         uint32_t flow_idx = flow_list_create(dev, &priv->ctrl_flows,
6471                                 &attr, items, actions, false, &error);
6472
6473         if (!flow_idx)
6474                 return -rte_errno;
6475         return 0;
6476 }
6477
6478 /**
6479  * Destroy a flow.
6480  *
6481  * @see rte_flow_destroy()
6482  * @see rte_flow_ops
6483  */
6484 int
6485 mlx5_flow_destroy(struct rte_eth_dev *dev,
6486                   struct rte_flow *flow,
6487                   struct rte_flow_error *error __rte_unused)
6488 {
6489         struct mlx5_priv *priv = dev->data->dev_private;
6490
6491         flow_list_destroy(dev, &priv->flows, (uintptr_t)(void *)flow);
6492         return 0;
6493 }
6494
6495 /**
6496  * Destroy all flows.
6497  *
6498  * @see rte_flow_flush()
6499  * @see rte_flow_ops
6500  */
6501 int
6502 mlx5_flow_flush(struct rte_eth_dev *dev,
6503                 struct rte_flow_error *error __rte_unused)
6504 {
6505         struct mlx5_priv *priv = dev->data->dev_private;
6506
6507         mlx5_flow_list_flush(dev, &priv->flows, false);
6508         return 0;
6509 }
6510
6511 /**
6512  * Isolated mode.
6513  *
6514  * @see rte_flow_isolate()
6515  * @see rte_flow_ops
6516  */
6517 int
6518 mlx5_flow_isolate(struct rte_eth_dev *dev,
6519                   int enable,
6520                   struct rte_flow_error *error)
6521 {
6522         struct mlx5_priv *priv = dev->data->dev_private;
6523
6524         if (dev->data->dev_started) {
6525                 rte_flow_error_set(error, EBUSY,
6526                                    RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
6527                                    NULL,
6528                                    "port must be stopped first");
6529                 return -rte_errno;
6530         }
6531         priv->isolated = !!enable;
6532         if (enable)
6533                 dev->dev_ops = &mlx5_dev_ops_isolate;
6534         else
6535                 dev->dev_ops = &mlx5_dev_ops;
6536
6537         dev->rx_descriptor_status = mlx5_rx_descriptor_status;
6538         dev->tx_descriptor_status = mlx5_tx_descriptor_status;
6539
6540         return 0;
6541 }
6542
6543 /**
6544  * Query a flow.
6545  *
6546  * @see rte_flow_query()
6547  * @see rte_flow_ops
6548  */
6549 static int
6550 flow_drv_query(struct rte_eth_dev *dev,
6551                uint32_t flow_idx,
6552                const struct rte_flow_action *actions,
6553                void *data,
6554                struct rte_flow_error *error)
6555 {
6556         struct mlx5_priv *priv = dev->data->dev_private;
6557         const struct mlx5_flow_driver_ops *fops;
6558         struct rte_flow *flow = mlx5_ipool_get(priv->sh->ipool
6559                                                [MLX5_IPOOL_RTE_FLOW],
6560                                                flow_idx);
6561         enum mlx5_flow_drv_type ftype;
6562
6563         if (!flow) {
6564                 return rte_flow_error_set(error, ENOENT,
6565                           RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
6566                           NULL,
6567                           "invalid flow handle");
6568         }
6569         ftype = flow->drv_type;
6570         MLX5_ASSERT(ftype > MLX5_FLOW_TYPE_MIN && ftype < MLX5_FLOW_TYPE_MAX);
6571         fops = flow_get_drv_ops(ftype);
6572
6573         return fops->query(dev, flow, actions, data, error);
6574 }
6575
6576 /**
6577  * Query a flow.
6578  *
6579  * @see rte_flow_query()
6580  * @see rte_flow_ops
6581  */
6582 int
6583 mlx5_flow_query(struct rte_eth_dev *dev,
6584                 struct rte_flow *flow,
6585                 const struct rte_flow_action *actions,
6586                 void *data,
6587                 struct rte_flow_error *error)
6588 {
6589         int ret;
6590
6591         ret = flow_drv_query(dev, (uintptr_t)(void *)flow, actions, data,
6592                              error);
6593         if (ret < 0)
6594                 return ret;
6595         return 0;
6596 }
6597
6598 /**
6599  * Get rte_flow callbacks.
6600  *
6601  * @param dev
6602  *   Pointer to Ethernet device structure.
6603  * @param ops
6604  *   Pointer to operation-specific structure.
6605  *
6606  * @return 0
6607  */
6608 int
6609 mlx5_flow_ops_get(struct rte_eth_dev *dev __rte_unused,
6610                   const struct rte_flow_ops **ops)
6611 {
6612         *ops = &mlx5_flow_ops;
6613         return 0;
6614 }
6615
6616 /**
6617  * Create the needed meter and suffix tables.
6618  *
6619  * @param[in] dev
6620  *   Pointer to Ethernet device.
6621  *
6622  * @return
6623  *   Pointer to table set on success, NULL otherwise.
6624  */
6625 struct mlx5_meter_domains_infos *
6626 mlx5_flow_create_mtr_tbls(struct rte_eth_dev *dev)
6627 {
6628         const struct mlx5_flow_driver_ops *fops;
6629
6630         fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6631         return fops->create_mtr_tbls(dev);
6632 }
6633
6634 /**
6635  * Destroy the meter table set.
6636  *
6637  * @param[in] dev
6638  *   Pointer to Ethernet device.
6639  * @param[in] tbl
6640  *   Pointer to the meter table set.
6641  *
6642  * @return
6643  *   0 on success.
6644  */
6645 int
6646 mlx5_flow_destroy_mtr_tbls(struct rte_eth_dev *dev,
6647                            struct mlx5_meter_domains_infos *tbls)
6648 {
6649         const struct mlx5_flow_driver_ops *fops;
6650
6651         fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6652         return fops->destroy_mtr_tbls(dev, tbls);
6653 }
6654
6655 /**
6656  * Prepare policer rules.
6657  *
6658  * @param[in] dev
6659  *   Pointer to Ethernet device.
6660  * @param[in] fm
6661  *   Pointer to flow meter structure.
6662  * @param[in] attr
6663  *   Pointer to flow attributes.
6664  *
6665  * @return
6666  *   0 on success, -1 otherwise.
6667  */
6668 int
6669 mlx5_flow_prepare_policer_rules(struct rte_eth_dev *dev,
6670                                struct mlx5_flow_meter_info *fm,
6671                                const struct rte_flow_attr *attr)
6672 {
6673         const struct mlx5_flow_driver_ops *fops;
6674
6675         fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6676         return fops->prepare_policer_rules(dev, fm, attr);
6677 }
6678
6679 /**
6680  * Destroy policer rules.
6681  *
6682  * @param[in] fm
6683  *   Pointer to flow meter structure.
6684  * @param[in] attr
6685  *   Pointer to flow attributes.
6686  *
6687  * @return
6688  *   0 on success, -1 otherwise.
6689  */
6690 int
6691 mlx5_flow_destroy_policer_rules(struct rte_eth_dev *dev,
6692                                 struct mlx5_flow_meter_info *fm,
6693                                 const struct rte_flow_attr *attr)
6694 {
6695         const struct mlx5_flow_driver_ops *fops;
6696
6697         fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6698         return fops->destroy_policer_rules(dev, fm, attr);
6699 }
6700
6701 /**
6702  * Allocate the needed aso flow meter id.
6703  *
6704  * @param[in] dev
6705  *   Pointer to Ethernet device.
6706  *
6707  * @return
6708  *   Index to aso flow meter on success, NULL otherwise.
6709  */
6710 uint32_t
6711 mlx5_flow_mtr_alloc(struct rte_eth_dev *dev)
6712 {
6713         const struct mlx5_flow_driver_ops *fops;
6714
6715         fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6716         return fops->create_meter(dev);
6717 }
6718
6719 /**
6720  * Free the aso flow meter id.
6721  *
6722  * @param[in] dev
6723  *   Pointer to Ethernet device.
6724  * @param[in] mtr_idx
6725  *  Index to aso flow meter to be free.
6726  *
6727  * @return
6728  *   0 on success.
6729  */
6730 void
6731 mlx5_flow_mtr_free(struct rte_eth_dev *dev, uint32_t mtr_idx)
6732 {
6733         const struct mlx5_flow_driver_ops *fops;
6734
6735         fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6736         fops->free_meter(dev, mtr_idx);
6737 }
6738
6739 /**
6740  * Allocate a counter.
6741  *
6742  * @param[in] dev
6743  *   Pointer to Ethernet device structure.
6744  *
6745  * @return
6746  *   Index to allocated counter  on success, 0 otherwise.
6747  */
6748 uint32_t
6749 mlx5_counter_alloc(struct rte_eth_dev *dev)
6750 {
6751         const struct mlx5_flow_driver_ops *fops;
6752         struct rte_flow_attr attr = { .transfer = 0 };
6753
6754         if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
6755                 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6756                 return fops->counter_alloc(dev);
6757         }
6758         DRV_LOG(ERR,
6759                 "port %u counter allocate is not supported.",
6760                  dev->data->port_id);
6761         return 0;
6762 }
6763
6764 /**
6765  * Free a counter.
6766  *
6767  * @param[in] dev
6768  *   Pointer to Ethernet device structure.
6769  * @param[in] cnt
6770  *   Index to counter to be free.
6771  */
6772 void
6773 mlx5_counter_free(struct rte_eth_dev *dev, uint32_t cnt)
6774 {
6775         const struct mlx5_flow_driver_ops *fops;
6776         struct rte_flow_attr attr = { .transfer = 0 };
6777
6778         if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
6779                 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6780                 fops->counter_free(dev, cnt);
6781                 return;
6782         }
6783         DRV_LOG(ERR,
6784                 "port %u counter free is not supported.",
6785                  dev->data->port_id);
6786 }
6787
6788 /**
6789  * Query counter statistics.
6790  *
6791  * @param[in] dev
6792  *   Pointer to Ethernet device structure.
6793  * @param[in] cnt
6794  *   Index to counter to query.
6795  * @param[in] clear
6796  *   Set to clear counter statistics.
6797  * @param[out] pkts
6798  *   The counter hits packets number to save.
6799  * @param[out] bytes
6800  *   The counter hits bytes number to save.
6801  *
6802  * @return
6803  *   0 on success, a negative errno value otherwise.
6804  */
6805 int
6806 mlx5_counter_query(struct rte_eth_dev *dev, uint32_t cnt,
6807                    bool clear, uint64_t *pkts, uint64_t *bytes)
6808 {
6809         const struct mlx5_flow_driver_ops *fops;
6810         struct rte_flow_attr attr = { .transfer = 0 };
6811
6812         if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
6813                 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6814                 return fops->counter_query(dev, cnt, clear, pkts, bytes);
6815         }
6816         DRV_LOG(ERR,
6817                 "port %u counter query is not supported.",
6818                  dev->data->port_id);
6819         return -ENOTSUP;
6820 }
6821
6822 /**
6823  * Allocate a new memory for the counter values wrapped by all the needed
6824  * management.
6825  *
6826  * @param[in] sh
6827  *   Pointer to mlx5_dev_ctx_shared object.
6828  *
6829  * @return
6830  *   0 on success, a negative errno value otherwise.
6831  */
6832 static int
6833 mlx5_flow_create_counter_stat_mem_mng(struct mlx5_dev_ctx_shared *sh)
6834 {
6835         struct mlx5_devx_mkey_attr mkey_attr;
6836         struct mlx5_counter_stats_mem_mng *mem_mng;
6837         volatile struct flow_counter_stats *raw_data;
6838         int raws_n = MLX5_CNT_CONTAINER_RESIZE + MLX5_MAX_PENDING_QUERIES;
6839         int size = (sizeof(struct flow_counter_stats) *
6840                         MLX5_COUNTERS_PER_POOL +
6841                         sizeof(struct mlx5_counter_stats_raw)) * raws_n +
6842                         sizeof(struct mlx5_counter_stats_mem_mng);
6843         size_t pgsize = rte_mem_page_size();
6844         uint8_t *mem;
6845         int i;
6846
6847         if (pgsize == (size_t)-1) {
6848                 DRV_LOG(ERR, "Failed to get mem page size");
6849                 rte_errno = ENOMEM;
6850                 return -ENOMEM;
6851         }
6852         mem = mlx5_malloc(MLX5_MEM_ZERO, size, pgsize, SOCKET_ID_ANY);
6853         if (!mem) {
6854                 rte_errno = ENOMEM;
6855                 return -ENOMEM;
6856         }
6857         mem_mng = (struct mlx5_counter_stats_mem_mng *)(mem + size) - 1;
6858         size = sizeof(*raw_data) * MLX5_COUNTERS_PER_POOL * raws_n;
6859         mem_mng->umem = mlx5_os_umem_reg(sh->ctx, mem, size,
6860                                                  IBV_ACCESS_LOCAL_WRITE);
6861         if (!mem_mng->umem) {
6862                 rte_errno = errno;
6863                 mlx5_free(mem);
6864                 return -rte_errno;
6865         }
6866         mkey_attr.addr = (uintptr_t)mem;
6867         mkey_attr.size = size;
6868         mkey_attr.umem_id = mlx5_os_get_umem_id(mem_mng->umem);
6869         mkey_attr.pd = sh->pdn;
6870         mkey_attr.log_entity_size = 0;
6871         mkey_attr.pg_access = 0;
6872         mkey_attr.klm_array = NULL;
6873         mkey_attr.klm_num = 0;
6874         mkey_attr.relaxed_ordering_write = sh->cmng.relaxed_ordering_write;
6875         mkey_attr.relaxed_ordering_read = sh->cmng.relaxed_ordering_read;
6876         mem_mng->dm = mlx5_devx_cmd_mkey_create(sh->ctx, &mkey_attr);
6877         if (!mem_mng->dm) {
6878                 mlx5_os_umem_dereg(mem_mng->umem);
6879                 rte_errno = errno;
6880                 mlx5_free(mem);
6881                 return -rte_errno;
6882         }
6883         mem_mng->raws = (struct mlx5_counter_stats_raw *)(mem + size);
6884         raw_data = (volatile struct flow_counter_stats *)mem;
6885         for (i = 0; i < raws_n; ++i) {
6886                 mem_mng->raws[i].mem_mng = mem_mng;
6887                 mem_mng->raws[i].data = raw_data + i * MLX5_COUNTERS_PER_POOL;
6888         }
6889         for (i = 0; i < MLX5_MAX_PENDING_QUERIES; ++i)
6890                 LIST_INSERT_HEAD(&sh->cmng.free_stat_raws,
6891                                  mem_mng->raws + MLX5_CNT_CONTAINER_RESIZE + i,
6892                                  next);
6893         LIST_INSERT_HEAD(&sh->cmng.mem_mngs, mem_mng, next);
6894         sh->cmng.mem_mng = mem_mng;
6895         return 0;
6896 }
6897
6898 /**
6899  * Set the statistic memory to the new counter pool.
6900  *
6901  * @param[in] sh
6902  *   Pointer to mlx5_dev_ctx_shared object.
6903  * @param[in] pool
6904  *   Pointer to the pool to set the statistic memory.
6905  *
6906  * @return
6907  *   0 on success, a negative errno value otherwise.
6908  */
6909 static int
6910 mlx5_flow_set_counter_stat_mem(struct mlx5_dev_ctx_shared *sh,
6911                                struct mlx5_flow_counter_pool *pool)
6912 {
6913         struct mlx5_flow_counter_mng *cmng = &sh->cmng;
6914         /* Resize statistic memory once used out. */
6915         if (!(pool->index % MLX5_CNT_CONTAINER_RESIZE) &&
6916             mlx5_flow_create_counter_stat_mem_mng(sh)) {
6917                 DRV_LOG(ERR, "Cannot resize counter stat mem.");
6918                 return -1;
6919         }
6920         rte_spinlock_lock(&pool->sl);
6921         pool->raw = cmng->mem_mng->raws + pool->index %
6922                     MLX5_CNT_CONTAINER_RESIZE;
6923         rte_spinlock_unlock(&pool->sl);
6924         pool->raw_hw = NULL;
6925         return 0;
6926 }
6927
6928 #define MLX5_POOL_QUERY_FREQ_US 1000000
6929
6930 /**
6931  * Set the periodic procedure for triggering asynchronous batch queries for all
6932  * the counter pools.
6933  *
6934  * @param[in] sh
6935  *   Pointer to mlx5_dev_ctx_shared object.
6936  */
6937 void
6938 mlx5_set_query_alarm(struct mlx5_dev_ctx_shared *sh)
6939 {
6940         uint32_t pools_n, us;
6941
6942         pools_n = __atomic_load_n(&sh->cmng.n_valid, __ATOMIC_RELAXED);
6943         us = MLX5_POOL_QUERY_FREQ_US / pools_n;
6944         DRV_LOG(DEBUG, "Set alarm for %u pools each %u us", pools_n, us);
6945         if (rte_eal_alarm_set(us, mlx5_flow_query_alarm, sh)) {
6946                 sh->cmng.query_thread_on = 0;
6947                 DRV_LOG(ERR, "Cannot reinitialize query alarm");
6948         } else {
6949                 sh->cmng.query_thread_on = 1;
6950         }
6951 }
6952
6953 /**
6954  * The periodic procedure for triggering asynchronous batch queries for all the
6955  * counter pools. This function is probably called by the host thread.
6956  *
6957  * @param[in] arg
6958  *   The parameter for the alarm process.
6959  */
6960 void
6961 mlx5_flow_query_alarm(void *arg)
6962 {
6963         struct mlx5_dev_ctx_shared *sh = arg;
6964         int ret;
6965         uint16_t pool_index = sh->cmng.pool_index;
6966         struct mlx5_flow_counter_mng *cmng = &sh->cmng;
6967         struct mlx5_flow_counter_pool *pool;
6968         uint16_t n_valid;
6969
6970         if (sh->cmng.pending_queries >= MLX5_MAX_PENDING_QUERIES)
6971                 goto set_alarm;
6972         rte_spinlock_lock(&cmng->pool_update_sl);
6973         pool = cmng->pools[pool_index];
6974         n_valid = cmng->n_valid;
6975         rte_spinlock_unlock(&cmng->pool_update_sl);
6976         /* Set the statistic memory to the new created pool. */
6977         if ((!pool->raw && mlx5_flow_set_counter_stat_mem(sh, pool)))
6978                 goto set_alarm;
6979         if (pool->raw_hw)
6980                 /* There is a pool query in progress. */
6981                 goto set_alarm;
6982         pool->raw_hw =
6983                 LIST_FIRST(&sh->cmng.free_stat_raws);
6984         if (!pool->raw_hw)
6985                 /* No free counter statistics raw memory. */
6986                 goto set_alarm;
6987         /*
6988          * Identify the counters released between query trigger and query
6989          * handle more efficiently. The counter released in this gap period
6990          * should wait for a new round of query as the new arrived packets
6991          * will not be taken into account.
6992          */
6993         pool->query_gen++;
6994         ret = mlx5_devx_cmd_flow_counter_query(pool->min_dcs, 0,
6995                                                MLX5_COUNTERS_PER_POOL,
6996                                                NULL, NULL,
6997                                                pool->raw_hw->mem_mng->dm->id,
6998                                                (void *)(uintptr_t)
6999                                                pool->raw_hw->data,
7000                                                sh->devx_comp,
7001                                                (uint64_t)(uintptr_t)pool);
7002         if (ret) {
7003                 DRV_LOG(ERR, "Failed to trigger asynchronous query for dcs ID"
7004                         " %d", pool->min_dcs->id);
7005                 pool->raw_hw = NULL;
7006                 goto set_alarm;
7007         }
7008         LIST_REMOVE(pool->raw_hw, next);
7009         sh->cmng.pending_queries++;
7010         pool_index++;
7011         if (pool_index >= n_valid)
7012                 pool_index = 0;
7013 set_alarm:
7014         sh->cmng.pool_index = pool_index;
7015         mlx5_set_query_alarm(sh);
7016 }
7017
7018 /**
7019  * Check and callback event for new aged flow in the counter pool
7020  *
7021  * @param[in] sh
7022  *   Pointer to mlx5_dev_ctx_shared object.
7023  * @param[in] pool
7024  *   Pointer to Current counter pool.
7025  */
7026 static void
7027 mlx5_flow_aging_check(struct mlx5_dev_ctx_shared *sh,
7028                    struct mlx5_flow_counter_pool *pool)
7029 {
7030         struct mlx5_priv *priv;
7031         struct mlx5_flow_counter *cnt;
7032         struct mlx5_age_info *age_info;
7033         struct mlx5_age_param *age_param;
7034         struct mlx5_counter_stats_raw *cur = pool->raw_hw;
7035         struct mlx5_counter_stats_raw *prev = pool->raw;
7036         const uint64_t curr_time = MLX5_CURR_TIME_SEC;
7037         const uint32_t time_delta = curr_time - pool->time_of_last_age_check;
7038         uint16_t expected = AGE_CANDIDATE;
7039         uint32_t i;
7040
7041         pool->time_of_last_age_check = curr_time;
7042         for (i = 0; i < MLX5_COUNTERS_PER_POOL; ++i) {
7043                 cnt = MLX5_POOL_GET_CNT(pool, i);
7044                 age_param = MLX5_CNT_TO_AGE(cnt);
7045                 if (__atomic_load_n(&age_param->state,
7046                                     __ATOMIC_RELAXED) != AGE_CANDIDATE)
7047                         continue;
7048                 if (cur->data[i].hits != prev->data[i].hits) {
7049                         __atomic_store_n(&age_param->sec_since_last_hit, 0,
7050                                          __ATOMIC_RELAXED);
7051                         continue;
7052                 }
7053                 if (__atomic_add_fetch(&age_param->sec_since_last_hit,
7054                                        time_delta,
7055                                        __ATOMIC_RELAXED) <= age_param->timeout)
7056                         continue;
7057                 /**
7058                  * Hold the lock first, or if between the
7059                  * state AGE_TMOUT and tailq operation the
7060                  * release happened, the release procedure
7061                  * may delete a non-existent tailq node.
7062                  */
7063                 priv = rte_eth_devices[age_param->port_id].data->dev_private;
7064                 age_info = GET_PORT_AGE_INFO(priv);
7065                 rte_spinlock_lock(&age_info->aged_sl);
7066                 if (__atomic_compare_exchange_n(&age_param->state, &expected,
7067                                                 AGE_TMOUT, false,
7068                                                 __ATOMIC_RELAXED,
7069                                                 __ATOMIC_RELAXED)) {
7070                         TAILQ_INSERT_TAIL(&age_info->aged_counters, cnt, next);
7071                         MLX5_AGE_SET(age_info, MLX5_AGE_EVENT_NEW);
7072                 }
7073                 rte_spinlock_unlock(&age_info->aged_sl);
7074         }
7075         mlx5_age_event_prepare(sh);
7076 }
7077
7078 /**
7079  * Handler for the HW respond about ready values from an asynchronous batch
7080  * query. This function is probably called by the host thread.
7081  *
7082  * @param[in] sh
7083  *   The pointer to the shared device context.
7084  * @param[in] async_id
7085  *   The Devx async ID.
7086  * @param[in] status
7087  *   The status of the completion.
7088  */
7089 void
7090 mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
7091                                   uint64_t async_id, int status)
7092 {
7093         struct mlx5_flow_counter_pool *pool =
7094                 (struct mlx5_flow_counter_pool *)(uintptr_t)async_id;
7095         struct mlx5_counter_stats_raw *raw_to_free;
7096         uint8_t query_gen = pool->query_gen ^ 1;
7097         struct mlx5_flow_counter_mng *cmng = &sh->cmng;
7098         enum mlx5_counter_type cnt_type =
7099                 pool->is_aged ? MLX5_COUNTER_TYPE_AGE :
7100                                 MLX5_COUNTER_TYPE_ORIGIN;
7101
7102         if (unlikely(status)) {
7103                 raw_to_free = pool->raw_hw;
7104         } else {
7105                 raw_to_free = pool->raw;
7106                 if (pool->is_aged)
7107                         mlx5_flow_aging_check(sh, pool);
7108                 rte_spinlock_lock(&pool->sl);
7109                 pool->raw = pool->raw_hw;
7110                 rte_spinlock_unlock(&pool->sl);
7111                 /* Be sure the new raw counters data is updated in memory. */
7112                 rte_io_wmb();
7113                 if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
7114                         rte_spinlock_lock(&cmng->csl[cnt_type]);
7115                         TAILQ_CONCAT(&cmng->counters[cnt_type],
7116                                      &pool->counters[query_gen], next);
7117                         rte_spinlock_unlock(&cmng->csl[cnt_type]);
7118                 }
7119         }
7120         LIST_INSERT_HEAD(&sh->cmng.free_stat_raws, raw_to_free, next);
7121         pool->raw_hw = NULL;
7122         sh->cmng.pending_queries--;
7123 }
7124
7125 static int
7126 flow_group_to_table(uint32_t port_id, uint32_t group, uint32_t *table,
7127                     const struct flow_grp_info *grp_info,
7128                     struct rte_flow_error *error)
7129 {
7130         if (grp_info->transfer && grp_info->external &&
7131             grp_info->fdb_def_rule) {
7132                 if (group == UINT32_MAX)
7133                         return rte_flow_error_set
7134                                                 (error, EINVAL,
7135                                                  RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
7136                                                  NULL,
7137                                                  "group index not supported");
7138                 *table = group + 1;
7139         } else {
7140                 *table = group;
7141         }
7142         DRV_LOG(DEBUG, "port %u group=%#x table=%#x", port_id, group, *table);
7143         return 0;
7144 }
7145
7146 /**
7147  * Translate the rte_flow group index to HW table value.
7148  *
7149  * If tunnel offload is disabled, all group ids converted to flow table
7150  * id using the standard method.
7151  * If tunnel offload is enabled, group id can be converted using the
7152  * standard or tunnel conversion method. Group conversion method
7153  * selection depends on flags in `grp_info` parameter:
7154  * - Internal (grp_info.external == 0) groups conversion uses the
7155  *   standard method.
7156  * - Group ids in JUMP action converted with the tunnel conversion.
7157  * - Group id in rule attribute conversion depends on a rule type and
7158  *   group id value:
7159  *   ** non zero group attributes converted with the tunnel method
7160  *   ** zero group attribute in non-tunnel rule is converted using the
7161  *      standard method - there's only one root table
7162  *   ** zero group attribute in steer tunnel rule is converted with the
7163  *      standard method - single root table
7164  *   ** zero group attribute in match tunnel rule is a special OvS
7165  *      case: that value is used for portability reasons. That group
7166  *      id is converted with the tunnel conversion method.
7167  *
7168  * @param[in] dev
7169  *   Port device
7170  * @param[in] tunnel
7171  *   PMD tunnel offload object
7172  * @param[in] group
7173  *   rte_flow group index value.
7174  * @param[out] table
7175  *   HW table value.
7176  * @param[in] grp_info
7177  *   flags used for conversion
7178  * @param[out] error
7179  *   Pointer to error structure.
7180  *
7181  * @return
7182  *   0 on success, a negative errno value otherwise and rte_errno is set.
7183  */
7184 int
7185 mlx5_flow_group_to_table(struct rte_eth_dev *dev,
7186                          const struct mlx5_flow_tunnel *tunnel,
7187                          uint32_t group, uint32_t *table,
7188                          const struct flow_grp_info *grp_info,
7189                          struct rte_flow_error *error)
7190 {
7191         int ret;
7192         bool standard_translation;
7193
7194         if (!grp_info->skip_scale && grp_info->external &&
7195             group < MLX5_MAX_TABLES_EXTERNAL)
7196                 group *= MLX5_FLOW_TABLE_FACTOR;
7197         if (is_tunnel_offload_active(dev)) {
7198                 standard_translation = !grp_info->external ||
7199                                         grp_info->std_tbl_fix;
7200         } else {
7201                 standard_translation = true;
7202         }
7203         DRV_LOG(DEBUG,
7204                 "port %u group=%u transfer=%d external=%d fdb_def_rule=%d translate=%s",
7205                 dev->data->port_id, group, grp_info->transfer,
7206                 grp_info->external, grp_info->fdb_def_rule,
7207                 standard_translation ? "STANDARD" : "TUNNEL");
7208         if (standard_translation)
7209                 ret = flow_group_to_table(dev->data->port_id, group, table,
7210                                           grp_info, error);
7211         else
7212                 ret = tunnel_flow_group_to_flow_table(dev, tunnel, group,
7213                                                       table, error);
7214
7215         return ret;
7216 }
7217
7218 /**
7219  * Discover availability of metadata reg_c's.
7220  *
7221  * Iteratively use test flows to check availability.
7222  *
7223  * @param[in] dev
7224  *   Pointer to the Ethernet device structure.
7225  *
7226  * @return
7227  *   0 on success, a negative errno value otherwise and rte_errno is set.
7228  */
7229 int
7230 mlx5_flow_discover_mreg_c(struct rte_eth_dev *dev)
7231 {
7232         struct mlx5_priv *priv = dev->data->dev_private;
7233         struct mlx5_dev_config *config = &priv->config;
7234         enum modify_reg idx;
7235         int n = 0;
7236
7237         /* reg_c[0] and reg_c[1] are reserved. */
7238         config->flow_mreg_c[n++] = REG_C_0;
7239         config->flow_mreg_c[n++] = REG_C_1;
7240         /* Discover availability of other reg_c's. */
7241         for (idx = REG_C_2; idx <= REG_C_7; ++idx) {
7242                 struct rte_flow_attr attr = {
7243                         .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
7244                         .priority = MLX5_FLOW_LOWEST_PRIO_INDICATOR,
7245                         .ingress = 1,
7246                 };
7247                 struct rte_flow_item items[] = {
7248                         [0] = {
7249                                 .type = RTE_FLOW_ITEM_TYPE_END,
7250                         },
7251                 };
7252                 struct rte_flow_action actions[] = {
7253                         [0] = {
7254                                 .type = (enum rte_flow_action_type)
7255                                         MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
7256                                 .conf = &(struct mlx5_flow_action_copy_mreg){
7257                                         .src = REG_C_1,
7258                                         .dst = idx,
7259                                 },
7260                         },
7261                         [1] = {
7262                                 .type = RTE_FLOW_ACTION_TYPE_JUMP,
7263                                 .conf = &(struct rte_flow_action_jump){
7264                                         .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
7265                                 },
7266                         },
7267                         [2] = {
7268                                 .type = RTE_FLOW_ACTION_TYPE_END,
7269                         },
7270                 };
7271                 uint32_t flow_idx;
7272                 struct rte_flow *flow;
7273                 struct rte_flow_error error;
7274
7275                 if (!config->dv_flow_en)
7276                         break;
7277                 /* Create internal flow, validation skips copy action. */
7278                 flow_idx = flow_list_create(dev, NULL, &attr, items,
7279                                             actions, false, &error);
7280                 flow = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW],
7281                                       flow_idx);
7282                 if (!flow)
7283                         continue;
7284                 config->flow_mreg_c[n++] = idx;
7285                 flow_list_destroy(dev, NULL, flow_idx);
7286         }
7287         for (; n < MLX5_MREG_C_NUM; ++n)
7288                 config->flow_mreg_c[n] = REG_NON;
7289         return 0;
7290 }
7291
7292 /**
7293  * Dump flow raw hw data to file
7294  *
7295  * @param[in] dev
7296  *    The pointer to Ethernet device.
7297  * @param[in] file
7298  *   A pointer to a file for output.
7299  * @param[out] error
7300  *   Perform verbose error reporting if not NULL. PMDs initialize this
7301  *   structure in case of error only.
7302  * @return
7303  *   0 on success, a nagative value otherwise.
7304  */
7305 int
7306 mlx5_flow_dev_dump(struct rte_eth_dev *dev, struct rte_flow *flow_idx,
7307                    FILE *file,
7308                    struct rte_flow_error *error __rte_unused)
7309 {
7310         struct mlx5_priv *priv = dev->data->dev_private;
7311         struct mlx5_dev_ctx_shared *sh = priv->sh;
7312         uint32_t handle_idx;
7313         int ret;
7314         struct mlx5_flow_handle *dh;
7315         struct rte_flow *flow;
7316
7317         if (!priv->config.dv_flow_en) {
7318                 if (fputs("device dv flow disabled\n", file) <= 0)
7319                         return -errno;
7320                 return -ENOTSUP;
7321         }
7322
7323         /* dump all */
7324         if (!flow_idx)
7325                 return mlx5_devx_cmd_flow_dump(sh->fdb_domain,
7326                                         sh->rx_domain,
7327                                         sh->tx_domain, file);
7328         /* dump one */
7329         flow = mlx5_ipool_get(priv->sh->ipool
7330                         [MLX5_IPOOL_RTE_FLOW], (uintptr_t)(void *)flow_idx);
7331         if (!flow)
7332                 return -ENOENT;
7333
7334         handle_idx = flow->dev_handles;
7335         while (handle_idx) {
7336                 dh = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW],
7337                                 handle_idx);
7338                 if (!dh)
7339                         return -ENOENT;
7340                 if (dh->drv_flow) {
7341                         ret = mlx5_devx_cmd_flow_single_dump(dh->drv_flow,
7342                                         file);
7343                         if (ret)
7344                                 return -ENOENT;
7345                 }
7346                 handle_idx = dh->next.next;
7347         }
7348         return 0;
7349 }
7350
7351 /**
7352  * Get aged-out flows.
7353  *
7354  * @param[in] dev
7355  *   Pointer to the Ethernet device structure.
7356  * @param[in] context
7357  *   The address of an array of pointers to the aged-out flows contexts.
7358  * @param[in] nb_countexts
7359  *   The length of context array pointers.
7360  * @param[out] error
7361  *   Perform verbose error reporting if not NULL. Initialized in case of
7362  *   error only.
7363  *
7364  * @return
7365  *   how many contexts get in success, otherwise negative errno value.
7366  *   if nb_contexts is 0, return the amount of all aged contexts.
7367  *   if nb_contexts is not 0 , return the amount of aged flows reported
7368  *   in the context array.
7369  */
7370 int
7371 mlx5_flow_get_aged_flows(struct rte_eth_dev *dev, void **contexts,
7372                         uint32_t nb_contexts, struct rte_flow_error *error)
7373 {
7374         const struct mlx5_flow_driver_ops *fops;
7375         struct rte_flow_attr attr = { .transfer = 0 };
7376
7377         if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
7378                 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
7379                 return fops->get_aged_flows(dev, contexts, nb_contexts,
7380                                                     error);
7381         }
7382         DRV_LOG(ERR,
7383                 "port %u get aged flows is not supported.",
7384                  dev->data->port_id);
7385         return -ENOTSUP;
7386 }
7387
7388 /* Wrapper for driver action_validate op callback */
7389 static int
7390 flow_drv_action_validate(struct rte_eth_dev *dev,
7391                          const struct rte_flow_indir_action_conf *conf,
7392                          const struct rte_flow_action *action,
7393                          const struct mlx5_flow_driver_ops *fops,
7394                          struct rte_flow_error *error)
7395 {
7396         static const char err_msg[] = "indirect action validation unsupported";
7397
7398         if (!fops->action_validate) {
7399                 DRV_LOG(ERR, "port %u %s.", dev->data->port_id, err_msg);
7400                 rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
7401                                    NULL, err_msg);
7402                 return -rte_errno;
7403         }
7404         return fops->action_validate(dev, conf, action, error);
7405 }
7406
7407 /**
7408  * Destroys the shared action by handle.
7409  *
7410  * @param dev
7411  *   Pointer to Ethernet device structure.
7412  * @param[in] handle
7413  *   Handle for the indirect action object to be destroyed.
7414  * @param[out] error
7415  *   Perform verbose error reporting if not NULL. PMDs initialize this
7416  *   structure in case of error only.
7417  *
7418  * @return
7419  *   0 on success, a negative errno value otherwise and rte_errno is set.
7420  *
7421  * @note: wrapper for driver action_create op callback.
7422  */
7423 static int
7424 mlx5_action_handle_destroy(struct rte_eth_dev *dev,
7425                            struct rte_flow_action_handle *handle,
7426                            struct rte_flow_error *error)
7427 {
7428         static const char err_msg[] = "indirect action destruction unsupported";
7429         struct rte_flow_attr attr = { .transfer = 0 };
7430         const struct mlx5_flow_driver_ops *fops =
7431                         flow_get_drv_ops(flow_get_drv_type(dev, &attr));
7432
7433         if (!fops->action_destroy) {
7434                 DRV_LOG(ERR, "port %u %s.", dev->data->port_id, err_msg);
7435                 rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
7436                                    NULL, err_msg);
7437                 return -rte_errno;
7438         }
7439         return fops->action_destroy(dev, handle, error);
7440 }
7441
7442 /* Wrapper for driver action_destroy op callback */
7443 static int
7444 flow_drv_action_update(struct rte_eth_dev *dev,
7445                        struct rte_flow_action_handle *handle,
7446                        const void *update,
7447                        const struct mlx5_flow_driver_ops *fops,
7448                        struct rte_flow_error *error)
7449 {
7450         static const char err_msg[] = "indirect action update unsupported";
7451
7452         if (!fops->action_update) {
7453                 DRV_LOG(ERR, "port %u %s.", dev->data->port_id, err_msg);
7454                 rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
7455                                    NULL, err_msg);
7456                 return -rte_errno;
7457         }
7458         return fops->action_update(dev, handle, update, error);
7459 }
7460
7461 /* Wrapper for driver action_destroy op callback */
7462 static int
7463 flow_drv_action_query(struct rte_eth_dev *dev,
7464                       const struct rte_flow_action_handle *handle,
7465                       void *data,
7466                       const struct mlx5_flow_driver_ops *fops,
7467                       struct rte_flow_error *error)
7468 {
7469         static const char err_msg[] = "indirect action query unsupported";
7470
7471         if (!fops->action_query) {
7472                 DRV_LOG(ERR, "port %u %s.", dev->data->port_id, err_msg);
7473                 rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
7474                                    NULL, err_msg);
7475                 return -rte_errno;
7476         }
7477         return fops->action_query(dev, handle, data, error);
7478 }
7479
7480 /**
7481  * Create indirect action for reuse in multiple flow rules.
7482  *
7483  * @param dev
7484  *   Pointer to Ethernet device structure.
7485  * @param conf
7486  *   Pointer to indirect action object configuration.
7487  * @param[in] action
7488  *   Action configuration for indirect action object creation.
7489  * @param[out] error
7490  *   Perform verbose error reporting if not NULL. PMDs initialize this
7491  *   structure in case of error only.
7492  * @return
7493  *   A valid handle in case of success, NULL otherwise and rte_errno is set.
7494  */
7495 static struct rte_flow_action_handle *
7496 mlx5_action_handle_create(struct rte_eth_dev *dev,
7497                           const struct rte_flow_indir_action_conf *conf,
7498                           const struct rte_flow_action *action,
7499                           struct rte_flow_error *error)
7500 {
7501         static const char err_msg[] = "indirect action creation unsupported";
7502         struct rte_flow_attr attr = { .transfer = 0 };
7503         const struct mlx5_flow_driver_ops *fops =
7504                         flow_get_drv_ops(flow_get_drv_type(dev, &attr));
7505
7506         if (flow_drv_action_validate(dev, conf, action, fops, error))
7507                 return NULL;
7508         if (!fops->action_create) {
7509                 DRV_LOG(ERR, "port %u %s.", dev->data->port_id, err_msg);
7510                 rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
7511                                    NULL, err_msg);
7512                 return NULL;
7513         }
7514         return fops->action_create(dev, conf, action, error);
7515 }
7516
7517 /**
7518  * Updates inplace the indirect action configuration pointed by *handle*
7519  * with the configuration provided as *update* argument.
7520  * The update of the indirect action configuration effects all flow rules
7521  * reusing the action via handle.
7522  *
7523  * @param dev
7524  *   Pointer to Ethernet device structure.
7525  * @param[in] handle
7526  *   Handle for the indirect action to be updated.
7527  * @param[in] update
7528  *   Action specification used to modify the action pointed by handle.
7529  *   *update* could be of same type with the action pointed by the *handle*
7530  *   handle argument, or some other structures like a wrapper, depending on
7531  *   the indirect action type.
7532  * @param[out] error
7533  *   Perform verbose error reporting if not NULL. PMDs initialize this
7534  *   structure in case of error only.
7535  *
7536  * @return
7537  *   0 on success, a negative errno value otherwise and rte_errno is set.
7538  */
7539 static int
7540 mlx5_action_handle_update(struct rte_eth_dev *dev,
7541                 struct rte_flow_action_handle *handle,
7542                 const void *update,
7543                 struct rte_flow_error *error)
7544 {
7545         struct rte_flow_attr attr = { .transfer = 0 };
7546         const struct mlx5_flow_driver_ops *fops =
7547                         flow_get_drv_ops(flow_get_drv_type(dev, &attr));
7548         int ret;
7549
7550         ret = flow_drv_action_validate(dev, NULL,
7551                         (const struct rte_flow_action *)update, fops, error);
7552         if (ret)
7553                 return ret;
7554         return flow_drv_action_update(dev, handle, update, fops,
7555                                       error);
7556 }
7557
7558 /**
7559  * Query the indirect action by handle.
7560  *
7561  * This function allows retrieving action-specific data such as counters.
7562  * Data is gathered by special action which may be present/referenced in
7563  * more than one flow rule definition.
7564  *
7565  * see @RTE_FLOW_ACTION_TYPE_COUNT
7566  *
7567  * @param dev
7568  *   Pointer to Ethernet device structure.
7569  * @param[in] handle
7570  *   Handle for the indirect action to query.
7571  * @param[in, out] data
7572  *   Pointer to storage for the associated query data type.
7573  * @param[out] error
7574  *   Perform verbose error reporting if not NULL. PMDs initialize this
7575  *   structure in case of error only.
7576  *
7577  * @return
7578  *   0 on success, a negative errno value otherwise and rte_errno is set.
7579  */
7580 static int
7581 mlx5_action_handle_query(struct rte_eth_dev *dev,
7582                          const struct rte_flow_action_handle *handle,
7583                          void *data,
7584                          struct rte_flow_error *error)
7585 {
7586         struct rte_flow_attr attr = { .transfer = 0 };
7587         const struct mlx5_flow_driver_ops *fops =
7588                         flow_get_drv_ops(flow_get_drv_type(dev, &attr));
7589
7590         return flow_drv_action_query(dev, handle, data, fops, error);
7591 }
7592
7593 /**
7594  * Destroy all indirect actions (shared RSS).
7595  *
7596  * @param dev
7597  *   Pointer to Ethernet device.
7598  *
7599  * @return
7600  *   0 on success, a negative errno value otherwise and rte_errno is set.
7601  */
7602 int
7603 mlx5_action_handle_flush(struct rte_eth_dev *dev)
7604 {
7605         struct rte_flow_error error;
7606         struct mlx5_priv *priv = dev->data->dev_private;
7607         struct mlx5_shared_action_rss *shared_rss;
7608         int ret = 0;
7609         uint32_t idx;
7610
7611         ILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
7612                       priv->rss_shared_actions, idx, shared_rss, next) {
7613                 ret |= mlx5_action_handle_destroy(dev,
7614                        (struct rte_flow_action_handle *)(uintptr_t)idx, &error);
7615         }
7616         return ret;
7617 }
7618
7619 #ifndef HAVE_MLX5DV_DR
7620 #define MLX5_DOMAIN_SYNC_FLOW ((1 << 0) | (1 << 1))
7621 #else
7622 #define MLX5_DOMAIN_SYNC_FLOW \
7623         (MLX5DV_DR_DOMAIN_SYNC_FLAGS_SW | MLX5DV_DR_DOMAIN_SYNC_FLAGS_HW)
7624 #endif
7625
7626 int rte_pmd_mlx5_sync_flow(uint16_t port_id, uint32_t domains)
7627 {
7628         struct rte_eth_dev *dev = &rte_eth_devices[port_id];
7629         const struct mlx5_flow_driver_ops *fops;
7630         int ret;
7631         struct rte_flow_attr attr = { .transfer = 0 };
7632
7633         fops = flow_get_drv_ops(flow_get_drv_type(dev, &attr));
7634         ret = fops->sync_domain(dev, domains, MLX5_DOMAIN_SYNC_FLOW);
7635         if (ret > 0)
7636                 ret = -ret;
7637         return ret;
7638 }
7639
7640 /**
7641  * tunnel offload functionalilty is defined for DV environment only
7642  */
7643 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
7644 __extension__
7645 union tunnel_offload_mark {
7646         uint32_t val;
7647         struct {
7648                 uint32_t app_reserve:8;
7649                 uint32_t table_id:15;
7650                 uint32_t transfer:1;
7651                 uint32_t _unused_:8;
7652         };
7653 };
7654
7655 static bool
7656 mlx5_access_tunnel_offload_db
7657         (struct rte_eth_dev *dev,
7658          bool (*match)(struct rte_eth_dev *,
7659                        struct mlx5_flow_tunnel *, const void *),
7660          void (*hit)(struct rte_eth_dev *, struct mlx5_flow_tunnel *, void *),
7661          void (*miss)(struct rte_eth_dev *, void *),
7662          void *ctx, bool lock_op);
7663
7664 static int
7665 flow_tunnel_add_default_miss(struct rte_eth_dev *dev,
7666                              struct rte_flow *flow,
7667                              const struct rte_flow_attr *attr,
7668                              const struct rte_flow_action *app_actions,
7669                              uint32_t flow_idx,
7670                              struct tunnel_default_miss_ctx *ctx,
7671                              struct rte_flow_error *error)
7672 {
7673         struct mlx5_priv *priv = dev->data->dev_private;
7674         struct mlx5_flow *dev_flow;
7675         struct rte_flow_attr miss_attr = *attr;
7676         const struct mlx5_flow_tunnel *tunnel = app_actions[0].conf;
7677         const struct rte_flow_item miss_items[2] = {
7678                 {
7679                         .type = RTE_FLOW_ITEM_TYPE_ETH,
7680                         .spec = NULL,
7681                         .last = NULL,
7682                         .mask = NULL
7683                 },
7684                 {
7685                         .type = RTE_FLOW_ITEM_TYPE_END,
7686                         .spec = NULL,
7687                         .last = NULL,
7688                         .mask = NULL
7689                 }
7690         };
7691         union tunnel_offload_mark mark_id;
7692         struct rte_flow_action_mark miss_mark;
7693         struct rte_flow_action miss_actions[3] = {
7694                 [0] = { .type = RTE_FLOW_ACTION_TYPE_MARK, .conf = &miss_mark },
7695                 [2] = { .type = RTE_FLOW_ACTION_TYPE_END,  .conf = NULL }
7696         };
7697         const struct rte_flow_action_jump *jump_data;
7698         uint32_t i, flow_table = 0; /* prevent compilation warning */
7699         struct flow_grp_info grp_info = {
7700                 .external = 1,
7701                 .transfer = attr->transfer,
7702                 .fdb_def_rule = !!priv->fdb_def_rule,
7703                 .std_tbl_fix = 0,
7704         };
7705         int ret;
7706
7707         if (!attr->transfer) {
7708                 uint32_t q_size;
7709
7710                 miss_actions[1].type = RTE_FLOW_ACTION_TYPE_RSS;
7711                 q_size = priv->reta_idx_n * sizeof(ctx->queue[0]);
7712                 ctx->queue = mlx5_malloc(MLX5_MEM_SYS | MLX5_MEM_ZERO, q_size,
7713                                          0, SOCKET_ID_ANY);
7714                 if (!ctx->queue)
7715                         return rte_flow_error_set
7716                                 (error, ENOMEM,
7717                                 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
7718                                 NULL, "invalid default miss RSS");
7719                 ctx->action_rss.func = RTE_ETH_HASH_FUNCTION_DEFAULT,
7720                 ctx->action_rss.level = 0,
7721                 ctx->action_rss.types = priv->rss_conf.rss_hf,
7722                 ctx->action_rss.key_len = priv->rss_conf.rss_key_len,
7723                 ctx->action_rss.queue_num = priv->reta_idx_n,
7724                 ctx->action_rss.key = priv->rss_conf.rss_key,
7725                 ctx->action_rss.queue = ctx->queue;
7726                 if (!priv->reta_idx_n || !priv->rxqs_n)
7727                         return rte_flow_error_set
7728                                 (error, EINVAL,
7729                                 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
7730                                 NULL, "invalid port configuration");
7731                 if (!(dev->data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_RSS_FLAG))
7732                         ctx->action_rss.types = 0;
7733                 for (i = 0; i != priv->reta_idx_n; ++i)
7734                         ctx->queue[i] = (*priv->reta_idx)[i];
7735         } else {
7736                 miss_actions[1].type = RTE_FLOW_ACTION_TYPE_JUMP;
7737                 ctx->miss_jump.group = MLX5_TNL_MISS_FDB_JUMP_GRP;
7738         }
7739         miss_actions[1].conf = (typeof(miss_actions[1].conf))ctx->raw;
7740         for (; app_actions->type != RTE_FLOW_ACTION_TYPE_JUMP; app_actions++);
7741         jump_data = app_actions->conf;
7742         miss_attr.priority = MLX5_TNL_MISS_RULE_PRIORITY;
7743         miss_attr.group = jump_data->group;
7744         ret = mlx5_flow_group_to_table(dev, tunnel, jump_data->group,
7745                                        &flow_table, &grp_info, error);
7746         if (ret)
7747                 return rte_flow_error_set(error, EINVAL,
7748                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
7749                                           NULL, "invalid tunnel id");
7750         mark_id.app_reserve = 0;
7751         mark_id.table_id = tunnel_flow_tbl_to_id(flow_table);
7752         mark_id.transfer = !!attr->transfer;
7753         mark_id._unused_ = 0;
7754         miss_mark.id = mark_id.val;
7755         dev_flow = flow_drv_prepare(dev, flow, &miss_attr,
7756                                     miss_items, miss_actions, flow_idx, error);
7757         if (!dev_flow)
7758                 return -rte_errno;
7759         dev_flow->flow = flow;
7760         dev_flow->external = true;
7761         dev_flow->tunnel = tunnel;
7762         /* Subflow object was created, we must include one in the list. */
7763         SILIST_INSERT(&flow->dev_handles, dev_flow->handle_idx,
7764                       dev_flow->handle, next);
7765         DRV_LOG(DEBUG,
7766                 "port %u tunnel type=%d id=%u miss rule priority=%u group=%u",
7767                 dev->data->port_id, tunnel->app_tunnel.type,
7768                 tunnel->tunnel_id, miss_attr.priority, miss_attr.group);
7769         ret = flow_drv_translate(dev, dev_flow, &miss_attr, miss_items,
7770                                   miss_actions, error);
7771         if (!ret)
7772                 ret = flow_mreg_update_copy_table(dev, flow, miss_actions,
7773                                                   error);
7774
7775         return ret;
7776 }
7777
7778 static const struct mlx5_flow_tbl_data_entry  *
7779 tunnel_mark_decode(struct rte_eth_dev *dev, uint32_t mark)
7780 {
7781         struct mlx5_priv *priv = dev->data->dev_private;
7782         struct mlx5_dev_ctx_shared *sh = priv->sh;
7783         struct mlx5_hlist_entry *he;
7784         union tunnel_offload_mark mbits = { .val = mark };
7785         union mlx5_flow_tbl_key table_key = {
7786                 {
7787                         .table_id = tunnel_id_to_flow_tbl(mbits.table_id),
7788                         .dummy = 0,
7789                         .domain = !!mbits.transfer,
7790                         .direction = 0,
7791                 }
7792         };
7793         he = mlx5_hlist_lookup(sh->flow_tbls, table_key.v64, NULL);
7794         return he ?
7795                container_of(he, struct mlx5_flow_tbl_data_entry, entry) : NULL;
7796 }
7797
7798 static void
7799 mlx5_flow_tunnel_grp2tbl_remove_cb(struct mlx5_hlist *list,
7800                                    struct mlx5_hlist_entry *entry)
7801 {
7802         struct mlx5_dev_ctx_shared *sh = list->ctx;
7803         struct tunnel_tbl_entry *tte = container_of(entry, typeof(*tte), hash);
7804
7805         mlx5_ipool_free(sh->ipool[MLX5_IPOOL_TNL_TBL_ID],
7806                         tunnel_flow_tbl_to_id(tte->flow_table));
7807         mlx5_free(tte);
7808 }
7809
7810 static int
7811 mlx5_flow_tunnel_grp2tbl_match_cb(struct mlx5_hlist *list __rte_unused,
7812                                   struct mlx5_hlist_entry *entry,
7813                                   uint64_t key, void *cb_ctx __rte_unused)
7814 {
7815         union tunnel_tbl_key tbl = {
7816                 .val = key,
7817         };
7818         struct tunnel_tbl_entry *tte = container_of(entry, typeof(*tte), hash);
7819
7820         return tbl.tunnel_id != tte->tunnel_id || tbl.group != tte->group;
7821 }
7822
7823 static struct mlx5_hlist_entry *
7824 mlx5_flow_tunnel_grp2tbl_create_cb(struct mlx5_hlist *list, uint64_t key,
7825                                    void *ctx __rte_unused)
7826 {
7827         struct mlx5_dev_ctx_shared *sh = list->ctx;
7828         struct tunnel_tbl_entry *tte;
7829         union tunnel_tbl_key tbl = {
7830                 .val = key,
7831         };
7832
7833         tte = mlx5_malloc(MLX5_MEM_SYS | MLX5_MEM_ZERO,
7834                           sizeof(*tte), 0,
7835                           SOCKET_ID_ANY);
7836         if (!tte)
7837                 goto err;
7838         mlx5_ipool_malloc(sh->ipool[MLX5_IPOOL_TNL_TBL_ID],
7839                           &tte->flow_table);
7840         if (tte->flow_table >= MLX5_MAX_TABLES) {
7841                 DRV_LOG(ERR, "Tunnel TBL ID %d exceed max limit.",
7842                         tte->flow_table);
7843                 mlx5_ipool_free(sh->ipool[MLX5_IPOOL_TNL_TBL_ID],
7844                                 tte->flow_table);
7845                 goto err;
7846         } else if (!tte->flow_table) {
7847                 goto err;
7848         }
7849         tte->flow_table = tunnel_id_to_flow_tbl(tte->flow_table);
7850         tte->tunnel_id = tbl.tunnel_id;
7851         tte->group = tbl.group;
7852         return &tte->hash;
7853 err:
7854         if (tte)
7855                 mlx5_free(tte);
7856         return NULL;
7857 }
7858
7859 static uint32_t
7860 tunnel_flow_group_to_flow_table(struct rte_eth_dev *dev,
7861                                 const struct mlx5_flow_tunnel *tunnel,
7862                                 uint32_t group, uint32_t *table,
7863                                 struct rte_flow_error *error)
7864 {
7865         struct mlx5_hlist_entry *he;
7866         struct tunnel_tbl_entry *tte;
7867         union tunnel_tbl_key key = {
7868                 .tunnel_id = tunnel ? tunnel->tunnel_id : 0,
7869                 .group = group
7870         };
7871         struct mlx5_flow_tunnel_hub *thub = mlx5_tunnel_hub(dev);
7872         struct mlx5_hlist *group_hash;
7873
7874         group_hash = tunnel ? tunnel->groups : thub->groups;
7875         he = mlx5_hlist_register(group_hash, key.val, NULL);
7876         if (!he)
7877                 return rte_flow_error_set(error, EINVAL,
7878                                           RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
7879                                           NULL,
7880                                           "tunnel group index not supported");
7881         tte = container_of(he, typeof(*tte), hash);
7882         *table = tte->flow_table;
7883         DRV_LOG(DEBUG, "port %u tunnel %u group=%#x table=%#x",
7884                 dev->data->port_id, key.tunnel_id, group, *table);
7885         return 0;
7886 }
7887
7888 static void
7889 mlx5_flow_tunnel_free(struct rte_eth_dev *dev,
7890                       struct mlx5_flow_tunnel *tunnel)
7891 {
7892         struct mlx5_priv *priv = dev->data->dev_private;
7893         struct mlx5_indexed_pool *ipool;
7894
7895         DRV_LOG(DEBUG, "port %u release pmd tunnel id=0x%x",
7896                 dev->data->port_id, tunnel->tunnel_id);
7897         LIST_REMOVE(tunnel, chain);
7898         mlx5_hlist_destroy(tunnel->groups);
7899         ipool = priv->sh->ipool[MLX5_IPOOL_TUNNEL_ID];
7900         mlx5_ipool_free(ipool, tunnel->tunnel_id);
7901 }
7902
7903 static bool
7904 mlx5_access_tunnel_offload_db
7905         (struct rte_eth_dev *dev,
7906          bool (*match)(struct rte_eth_dev *,
7907                        struct mlx5_flow_tunnel *, const void *),
7908          void (*hit)(struct rte_eth_dev *, struct mlx5_flow_tunnel *, void *),
7909          void (*miss)(struct rte_eth_dev *, void *),
7910          void *ctx, bool lock_op)
7911 {
7912         bool verdict = false;
7913         struct mlx5_flow_tunnel_hub *thub = mlx5_tunnel_hub(dev);
7914         struct mlx5_flow_tunnel *tunnel;
7915
7916         rte_spinlock_lock(&thub->sl);
7917         LIST_FOREACH(tunnel, &thub->tunnels, chain) {
7918                 verdict = match(dev, tunnel, (const void *)ctx);
7919                 if (verdict)
7920                         break;
7921         }
7922         if (!lock_op)
7923                 rte_spinlock_unlock(&thub->sl);
7924         if (verdict && hit)
7925                 hit(dev, tunnel, ctx);
7926         if (!verdict && miss)
7927                 miss(dev, ctx);
7928         if (lock_op)
7929                 rte_spinlock_unlock(&thub->sl);
7930
7931         return verdict;
7932 }
7933
7934 struct tunnel_db_find_tunnel_id_ctx {
7935         uint32_t tunnel_id;
7936         struct mlx5_flow_tunnel *tunnel;
7937 };
7938
7939 static bool
7940 find_tunnel_id_match(struct rte_eth_dev *dev,
7941                      struct mlx5_flow_tunnel *tunnel, const void *x)
7942 {
7943         const struct tunnel_db_find_tunnel_id_ctx *ctx = x;
7944
7945         RTE_SET_USED(dev);
7946         return tunnel->tunnel_id == ctx->tunnel_id;
7947 }
7948
7949 static void
7950 find_tunnel_id_hit(struct rte_eth_dev *dev,
7951                    struct mlx5_flow_tunnel *tunnel, void *x)
7952 {
7953         struct tunnel_db_find_tunnel_id_ctx *ctx = x;
7954         RTE_SET_USED(dev);
7955         ctx->tunnel = tunnel;
7956 }
7957
7958 static struct mlx5_flow_tunnel *
7959 mlx5_find_tunnel_id(struct rte_eth_dev *dev, uint32_t id)
7960 {
7961         struct tunnel_db_find_tunnel_id_ctx ctx = {
7962                 .tunnel_id = id,
7963         };
7964
7965         mlx5_access_tunnel_offload_db(dev, find_tunnel_id_match,
7966                                       find_tunnel_id_hit, NULL, &ctx, true);
7967
7968         return ctx.tunnel;
7969 }
7970
7971 static struct mlx5_flow_tunnel *
7972 mlx5_flow_tunnel_allocate(struct rte_eth_dev *dev,
7973                           const struct rte_flow_tunnel *app_tunnel)
7974 {
7975         struct mlx5_priv *priv = dev->data->dev_private;
7976         struct mlx5_indexed_pool *ipool;
7977         struct mlx5_flow_tunnel *tunnel;
7978         uint32_t id;
7979
7980         ipool = priv->sh->ipool[MLX5_IPOOL_TUNNEL_ID];
7981         tunnel = mlx5_ipool_zmalloc(ipool, &id);
7982         if (!tunnel)
7983                 return NULL;
7984         if (id >= MLX5_MAX_TUNNELS) {
7985                 mlx5_ipool_free(ipool, id);
7986                 DRV_LOG(ERR, "Tunnel ID %d exceed max limit.", id);
7987                 return NULL;
7988         }
7989         tunnel->groups = mlx5_hlist_create("tunnel groups", 1024, 0, 0,
7990                                            mlx5_flow_tunnel_grp2tbl_create_cb,
7991                                            mlx5_flow_tunnel_grp2tbl_match_cb,
7992                                            mlx5_flow_tunnel_grp2tbl_remove_cb);
7993         if (!tunnel->groups) {
7994                 mlx5_ipool_free(ipool, id);
7995                 return NULL;
7996         }
7997         tunnel->groups->ctx = priv->sh;
7998         /* initiate new PMD tunnel */
7999         memcpy(&tunnel->app_tunnel, app_tunnel, sizeof(*app_tunnel));
8000         tunnel->tunnel_id = id;
8001         tunnel->action.type = (typeof(tunnel->action.type))
8002                               MLX5_RTE_FLOW_ACTION_TYPE_TUNNEL_SET;
8003         tunnel->action.conf = tunnel;
8004         tunnel->item.type = (typeof(tunnel->item.type))
8005                             MLX5_RTE_FLOW_ITEM_TYPE_TUNNEL;
8006         tunnel->item.spec = tunnel;
8007         tunnel->item.last = NULL;
8008         tunnel->item.mask = NULL;
8009
8010         DRV_LOG(DEBUG, "port %u new pmd tunnel id=0x%x",
8011                 dev->data->port_id, tunnel->tunnel_id);
8012
8013         return tunnel;
8014 }
8015
8016 struct tunnel_db_get_tunnel_ctx {
8017         const struct rte_flow_tunnel *app_tunnel;
8018         struct mlx5_flow_tunnel *tunnel;
8019 };
8020
8021 static bool get_tunnel_match(struct rte_eth_dev *dev,
8022                              struct mlx5_flow_tunnel *tunnel, const void *x)
8023 {
8024         const struct tunnel_db_get_tunnel_ctx *ctx = x;
8025
8026         RTE_SET_USED(dev);
8027         return !memcmp(ctx->app_tunnel, &tunnel->app_tunnel,
8028                        sizeof(*ctx->app_tunnel));
8029 }
8030
8031 static void get_tunnel_hit(struct rte_eth_dev *dev,
8032                            struct mlx5_flow_tunnel *tunnel, void *x)
8033 {
8034         /* called under tunnel spinlock protection */
8035         struct tunnel_db_get_tunnel_ctx *ctx = x;
8036
8037         RTE_SET_USED(dev);
8038         tunnel->refctn++;
8039         ctx->tunnel = tunnel;
8040 }
8041
8042 static void get_tunnel_miss(struct rte_eth_dev *dev, void *x)
8043 {
8044         /* called under tunnel spinlock protection */
8045         struct mlx5_flow_tunnel_hub *thub = mlx5_tunnel_hub(dev);
8046         struct tunnel_db_get_tunnel_ctx *ctx = x;
8047
8048         rte_spinlock_unlock(&thub->sl);
8049         ctx->tunnel = mlx5_flow_tunnel_allocate(dev, ctx->app_tunnel);
8050         rte_spinlock_lock(&thub->sl);
8051         if (ctx->tunnel) {
8052                 ctx->tunnel->refctn = 1;
8053                 LIST_INSERT_HEAD(&thub->tunnels, ctx->tunnel, chain);
8054         }
8055 }
8056
8057
8058 static int
8059 mlx5_get_flow_tunnel(struct rte_eth_dev *dev,
8060                      const struct rte_flow_tunnel *app_tunnel,
8061                      struct mlx5_flow_tunnel **tunnel)
8062 {
8063         struct tunnel_db_get_tunnel_ctx ctx = {
8064                 .app_tunnel = app_tunnel,
8065         };
8066
8067         mlx5_access_tunnel_offload_db(dev, get_tunnel_match, get_tunnel_hit,
8068                                       get_tunnel_miss, &ctx, true);
8069         *tunnel = ctx.tunnel;
8070         return ctx.tunnel ? 0 : -ENOMEM;
8071 }
8072
8073 void mlx5_release_tunnel_hub(struct mlx5_dev_ctx_shared *sh, uint16_t port_id)
8074 {
8075         struct mlx5_flow_tunnel_hub *thub = sh->tunnel_hub;
8076
8077         if (!thub)
8078                 return;
8079         if (!LIST_EMPTY(&thub->tunnels))
8080                 DRV_LOG(WARNING, "port %u tunnels present", port_id);
8081         mlx5_hlist_destroy(thub->groups);
8082         mlx5_free(thub);
8083 }
8084
8085 int mlx5_alloc_tunnel_hub(struct mlx5_dev_ctx_shared *sh)
8086 {
8087         int err;
8088         struct mlx5_flow_tunnel_hub *thub;
8089
8090         thub = mlx5_malloc(MLX5_MEM_SYS | MLX5_MEM_ZERO, sizeof(*thub),
8091                            0, SOCKET_ID_ANY);
8092         if (!thub)
8093                 return -ENOMEM;
8094         LIST_INIT(&thub->tunnels);
8095         rte_spinlock_init(&thub->sl);
8096         thub->groups = mlx5_hlist_create("flow groups",
8097                                          rte_align32pow2(MLX5_MAX_TABLES), 0,
8098                                          0, mlx5_flow_tunnel_grp2tbl_create_cb,
8099                                          mlx5_flow_tunnel_grp2tbl_match_cb,
8100                                          mlx5_flow_tunnel_grp2tbl_remove_cb);
8101         if (!thub->groups) {
8102                 err = -rte_errno;
8103                 goto err;
8104         }
8105         thub->groups->ctx = sh;
8106         sh->tunnel_hub = thub;
8107
8108         return 0;
8109
8110 err:
8111         if (thub->groups)
8112                 mlx5_hlist_destroy(thub->groups);
8113         if (thub)
8114                 mlx5_free(thub);
8115         return err;
8116 }
8117
8118 static inline bool
8119 mlx5_flow_tunnel_validate(struct rte_eth_dev *dev,
8120                           struct rte_flow_tunnel *tunnel,
8121                           const char *err_msg)
8122 {
8123         err_msg = NULL;
8124         if (!is_tunnel_offload_active(dev)) {
8125                 err_msg = "tunnel offload was not activated";
8126                 goto out;
8127         } else if (!tunnel) {
8128                 err_msg = "no application tunnel";
8129                 goto out;
8130         }
8131
8132         switch (tunnel->type) {
8133         default:
8134                 err_msg = "unsupported tunnel type";
8135                 goto out;
8136         case RTE_FLOW_ITEM_TYPE_VXLAN:
8137                 break;
8138         }
8139
8140 out:
8141         return !err_msg;
8142 }
8143
8144 static int
8145 mlx5_flow_tunnel_decap_set(struct rte_eth_dev *dev,
8146                     struct rte_flow_tunnel *app_tunnel,
8147                     struct rte_flow_action **actions,
8148                     uint32_t *num_of_actions,
8149                     struct rte_flow_error *error)
8150 {
8151         int ret;
8152         struct mlx5_flow_tunnel *tunnel;
8153         const char *err_msg = NULL;
8154         bool verdict = mlx5_flow_tunnel_validate(dev, app_tunnel, err_msg);
8155
8156         if (!verdict)
8157                 return rte_flow_error_set(error, EINVAL,
8158                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
8159                                           err_msg);
8160         ret = mlx5_get_flow_tunnel(dev, app_tunnel, &tunnel);
8161         if (ret < 0) {
8162                 return rte_flow_error_set(error, ret,
8163                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
8164                                           "failed to initialize pmd tunnel");
8165         }
8166         *actions = &tunnel->action;
8167         *num_of_actions = 1;
8168         return 0;
8169 }
8170
8171 static int
8172 mlx5_flow_tunnel_match(struct rte_eth_dev *dev,
8173                        struct rte_flow_tunnel *app_tunnel,
8174                        struct rte_flow_item **items,
8175                        uint32_t *num_of_items,
8176                        struct rte_flow_error *error)
8177 {
8178         int ret;
8179         struct mlx5_flow_tunnel *tunnel;
8180         const char *err_msg = NULL;
8181         bool verdict = mlx5_flow_tunnel_validate(dev, app_tunnel, err_msg);
8182
8183         if (!verdict)
8184                 return rte_flow_error_set(error, EINVAL,
8185                                           RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
8186                                           err_msg);
8187         ret = mlx5_get_flow_tunnel(dev, app_tunnel, &tunnel);
8188         if (ret < 0) {
8189                 return rte_flow_error_set(error, ret,
8190                                           RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
8191                                           "failed to initialize pmd tunnel");
8192         }
8193         *items = &tunnel->item;
8194         *num_of_items = 1;
8195         return 0;
8196 }
8197
8198 struct tunnel_db_element_release_ctx {
8199         struct rte_flow_item *items;
8200         struct rte_flow_action *actions;
8201         uint32_t num_elements;
8202         struct rte_flow_error *error;
8203         int ret;
8204 };
8205
8206 static bool
8207 tunnel_element_release_match(struct rte_eth_dev *dev,
8208                              struct mlx5_flow_tunnel *tunnel, const void *x)
8209 {
8210         const struct tunnel_db_element_release_ctx *ctx = x;
8211
8212         RTE_SET_USED(dev);
8213         if (ctx->num_elements != 1)
8214                 return false;
8215         else if (ctx->items)
8216                 return ctx->items == &tunnel->item;
8217         else if (ctx->actions)
8218                 return ctx->actions == &tunnel->action;
8219
8220         return false;
8221 }
8222
8223 static void
8224 tunnel_element_release_hit(struct rte_eth_dev *dev,
8225                            struct mlx5_flow_tunnel *tunnel, void *x)
8226 {
8227         struct tunnel_db_element_release_ctx *ctx = x;
8228         ctx->ret = 0;
8229         if (!__atomic_sub_fetch(&tunnel->refctn, 1, __ATOMIC_RELAXED))
8230                 mlx5_flow_tunnel_free(dev, tunnel);
8231 }
8232
8233 static void
8234 tunnel_element_release_miss(struct rte_eth_dev *dev, void *x)
8235 {
8236         struct tunnel_db_element_release_ctx *ctx = x;
8237         RTE_SET_USED(dev);
8238         ctx->ret = rte_flow_error_set(ctx->error, EINVAL,
8239                                       RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
8240                                       "invalid argument");
8241 }
8242
8243 static int
8244 mlx5_flow_tunnel_item_release(struct rte_eth_dev *dev,
8245                        struct rte_flow_item *pmd_items,
8246                        uint32_t num_items, struct rte_flow_error *err)
8247 {
8248         struct tunnel_db_element_release_ctx ctx = {
8249                 .items = pmd_items,
8250                 .actions = NULL,
8251                 .num_elements = num_items,
8252                 .error = err,
8253         };
8254
8255         mlx5_access_tunnel_offload_db(dev, tunnel_element_release_match,
8256                                       tunnel_element_release_hit,
8257                                       tunnel_element_release_miss, &ctx, false);
8258
8259         return ctx.ret;
8260 }
8261
8262 static int
8263 mlx5_flow_tunnel_action_release(struct rte_eth_dev *dev,
8264                          struct rte_flow_action *pmd_actions,
8265                          uint32_t num_actions, struct rte_flow_error *err)
8266 {
8267         struct tunnel_db_element_release_ctx ctx = {
8268                 .items = NULL,
8269                 .actions = pmd_actions,
8270                 .num_elements = num_actions,
8271                 .error = err,
8272         };
8273
8274         mlx5_access_tunnel_offload_db(dev, tunnel_element_release_match,
8275                                       tunnel_element_release_hit,
8276                                       tunnel_element_release_miss, &ctx, false);
8277
8278         return ctx.ret;
8279 }
8280
8281 static int
8282 mlx5_flow_tunnel_get_restore_info(struct rte_eth_dev *dev,
8283                                   struct rte_mbuf *m,
8284                                   struct rte_flow_restore_info *info,
8285                                   struct rte_flow_error *err)
8286 {
8287         uint64_t ol_flags = m->ol_flags;
8288         const struct mlx5_flow_tbl_data_entry *tble;
8289         const uint64_t mask = PKT_RX_FDIR | PKT_RX_FDIR_ID;
8290
8291         if (!is_tunnel_offload_active(dev)) {
8292                 info->flags = 0;
8293                 return 0;
8294         }
8295
8296         if ((ol_flags & mask) != mask)
8297                 goto err;
8298         tble = tunnel_mark_decode(dev, m->hash.fdir.hi);
8299         if (!tble) {
8300                 DRV_LOG(DEBUG, "port %u invalid miss tunnel mark %#x",
8301                         dev->data->port_id, m->hash.fdir.hi);
8302                 goto err;
8303         }
8304         MLX5_ASSERT(tble->tunnel);
8305         memcpy(&info->tunnel, &tble->tunnel->app_tunnel, sizeof(info->tunnel));
8306         info->group_id = tble->group_id;
8307         info->flags = RTE_FLOW_RESTORE_INFO_TUNNEL |
8308                       RTE_FLOW_RESTORE_INFO_GROUP_ID |
8309                       RTE_FLOW_RESTORE_INFO_ENCAPSULATED;
8310
8311         return 0;
8312
8313 err:
8314         return rte_flow_error_set(err, EINVAL,
8315                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
8316                                   "failed to get restore info");
8317 }
8318
8319 #else /* HAVE_IBV_FLOW_DV_SUPPORT */
8320 static int
8321 mlx5_flow_tunnel_decap_set(__rte_unused struct rte_eth_dev *dev,
8322                            __rte_unused struct rte_flow_tunnel *app_tunnel,
8323                            __rte_unused struct rte_flow_action **actions,
8324                            __rte_unused uint32_t *num_of_actions,
8325                            __rte_unused struct rte_flow_error *error)
8326 {
8327         return -ENOTSUP;
8328 }
8329
8330 static int
8331 mlx5_flow_tunnel_match(__rte_unused struct rte_eth_dev *dev,
8332                        __rte_unused struct rte_flow_tunnel *app_tunnel,
8333                        __rte_unused struct rte_flow_item **items,
8334                        __rte_unused uint32_t *num_of_items,
8335                        __rte_unused struct rte_flow_error *error)
8336 {
8337         return -ENOTSUP;
8338 }
8339
8340 static int
8341 mlx5_flow_tunnel_item_release(__rte_unused struct rte_eth_dev *dev,
8342                               __rte_unused struct rte_flow_item *pmd_items,
8343                               __rte_unused uint32_t num_items,
8344                               __rte_unused struct rte_flow_error *err)
8345 {
8346         return -ENOTSUP;
8347 }
8348
8349 static int
8350 mlx5_flow_tunnel_action_release(__rte_unused struct rte_eth_dev *dev,
8351                                 __rte_unused struct rte_flow_action *pmd_action,
8352                                 __rte_unused uint32_t num_actions,
8353                                 __rte_unused struct rte_flow_error *err)
8354 {
8355         return -ENOTSUP;
8356 }
8357
8358 static int
8359 mlx5_flow_tunnel_get_restore_info(__rte_unused struct rte_eth_dev *dev,
8360                                   __rte_unused struct rte_mbuf *m,
8361                                   __rte_unused struct rte_flow_restore_info *i,
8362                                   __rte_unused struct rte_flow_error *err)
8363 {
8364         return -ENOTSUP;
8365 }
8366
8367 static int
8368 flow_tunnel_add_default_miss(__rte_unused struct rte_eth_dev *dev,
8369                              __rte_unused struct rte_flow *flow,
8370                              __rte_unused const struct rte_flow_attr *attr,
8371                              __rte_unused const struct rte_flow_action *actions,
8372                              __rte_unused uint32_t flow_idx,
8373                              __rte_unused struct tunnel_default_miss_ctx *ctx,
8374                              __rte_unused struct rte_flow_error *error)
8375 {
8376         return -ENOTSUP;
8377 }
8378
8379 static struct mlx5_flow_tunnel *
8380 mlx5_find_tunnel_id(__rte_unused struct rte_eth_dev *dev,
8381                     __rte_unused uint32_t id)
8382 {
8383         return NULL;
8384 }
8385
8386 static void
8387 mlx5_flow_tunnel_free(__rte_unused struct rte_eth_dev *dev,
8388                       __rte_unused struct mlx5_flow_tunnel *tunnel)
8389 {
8390 }
8391
8392 static uint32_t
8393 tunnel_flow_group_to_flow_table(__rte_unused struct rte_eth_dev *dev,
8394                                 __rte_unused const struct mlx5_flow_tunnel *t,
8395                                 __rte_unused uint32_t group,
8396                                 __rte_unused uint32_t *table,
8397                                 struct rte_flow_error *error)
8398 {
8399         return rte_flow_error_set(error, ENOTSUP,
8400                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
8401                                   "tunnel offload requires DV support");
8402 }
8403
8404 void
8405 mlx5_release_tunnel_hub(__rte_unused struct mlx5_dev_ctx_shared *sh,
8406                         __rte_unused  uint16_t port_id)
8407 {
8408 }
8409 #endif /* HAVE_IBV_FLOW_DV_SUPPORT */