drivers/net/mlx5/mlx5_rxq.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright 2015 6WIND S.A.
   3  * Copyright 2015 Mellanox Technologies, Ltd
   4  */
   5
   6 #include <stddef.h>
   7 #include <assert.h>
   8 #include <errno.h>
   9 #include <string.h>
  10 #include <stdint.h>
  11 #include <fcntl.h>
  12 #include <sys/queue.h>
  13
  14 /* Verbs header. */
  15 /* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
  16 #ifdef PEDANTIC
  17 #pragma GCC diagnostic ignored "-Wpedantic"
  18 #endif
  19 #include <infiniband/verbs.h>
  20 #include <infiniband/mlx5dv.h>
  21 #ifdef PEDANTIC
  22 #pragma GCC diagnostic error "-Wpedantic"
  23 #endif
  24
  25 #include <rte_mbuf.h>
  26 #include <rte_malloc.h>
  27 #include <rte_ethdev_driver.h>
  28 #include <rte_common.h>
  29 #include <rte_interrupts.h>
  30 #include <rte_debug.h>
  31 #include <rte_io.h>
  32
  33 #include "mlx5.h"
  34 #include "mlx5_rxtx.h"
  35 #include "mlx5_utils.h"
  36 #include "mlx5_autoconf.h"
  37 #include "mlx5_defs.h"
  38 #include "mlx5_glue.h"
  39
  40 /* Default RSS hash key also used for ConnectX-3. */
  41 uint8_t rss_hash_default_key[] = {
  42         0x2c, 0xc6, 0x81, 0xd1,
  43         0x5b, 0xdb, 0xf4, 0xf7,
  44         0xfc, 0xa2, 0x83, 0x19,
  45         0xdb, 0x1a, 0x3e, 0x94,
  46         0x6b, 0x9e, 0x38, 0xd9,
  47         0x2c, 0x9c, 0x03, 0xd1,
  48         0xad, 0x99, 0x44, 0xa7,
  49         0xd9, 0x56, 0x3d, 0x59,
  50         0x06, 0x3c, 0x25, 0xf3,
  51         0xfc, 0x1f, 0xdc, 0x2a,
  52 };
  53
  54 /* Length of the default RSS hash key. */
  55 static_assert(MLX5_RSS_HASH_KEY_LEN ==
  56               (unsigned int)sizeof(rss_hash_default_key),
  57               "wrong RSS default key size.");
  58
  59 /**
  60  * Check whether Multi-Packet RQ can be enabled for the device.
  61  *
  62  * @param dev
  63  *   Pointer to Ethernet device.
  64  *
  65  * @return
  66  *   1 if supported, negative errno value if not.
  67  */
  68 inline int
  69 mlx5_check_mprq_support(struct rte_eth_dev *dev)
  70 {
  71         struct mlx5_priv *priv = dev->data->dev_private;
  72
  73         if (priv->config.mprq.enabled &&
  74             priv->rxqs_n >= priv->config.mprq.min_rxqs_num)
  75                 return 1;
  76         return -ENOTSUP;
  77 }
  78
  79 /**
  80  * Check whether Multi-Packet RQ is enabled for the Rx queue.
  81  *
  82  *  @param rxq
  83  *     Pointer to receive queue structure.
  84  *
  85  * @return
  86  *   0 if disabled, otherwise enabled.
  87  */
  88 inline int
  89 mlx5_rxq_mprq_enabled(struct mlx5_rxq_data *rxq)
  90 {
  91         return rxq->strd_num_n > 0;
  92 }
  93
  94 /**
  95  * Check whether Multi-Packet RQ is enabled for the device.
  96  * MPRQ can be enabled explicitly, or implicitly by enabling LRO.
  97  *
  98  * @param dev
  99  *   Pointer to Ethernet device.
 100  *
 101  * @return
 102  *   0 if disabled, otherwise enabled.
 103  */
 104 inline int
 105 mlx5_mprq_enabled(struct rte_eth_dev *dev)
 106 {
 107         struct mlx5_priv *priv = dev->data->dev_private;
 108         uint16_t i;
 109         uint16_t n = 0;
 110
 111         if (mlx5_check_mprq_support(dev) < 0)
 112                 return 0;
 113         /* All the configured queues should be enabled. */
 114         for (i = 0; i < priv->rxqs_n; ++i) {
 115                 struct mlx5_rxq_data *rxq = (*priv->rxqs)[i];
 116
 117                 if (!rxq)
 118                         continue;
 119                 if (mlx5_rxq_mprq_enabled(rxq))
 120                         ++n;
 121         }
 122         /* Multi-Packet RQ can't be partially configured. */
 123         assert(n == 0 || n == priv->rxqs_n);
 124         return n == priv->rxqs_n;
 125 }
 126
 127 /**
 128  * Check whether LRO is supported and enabled for the device.
 129  *
 130  * @param dev
 131  *   Pointer to Ethernet device.
 132  *
 133  * @return
 134  *   0 if disabled, 1 if enabled.
 135  */
 136 inline int
 137 mlx5_lro_on(struct rte_eth_dev *dev)
 138 {
 139         return (MLX5_LRO_SUPPORTED(dev) && MLX5_LRO_ENABLED(dev));
 140 }
 141
 142 /**
 143  * Allocate RX queue elements for Multi-Packet RQ.
 144  *
 145  * @param rxq_ctrl
 146  *   Pointer to RX queue structure.
 147  *
 148  * @return
 149  *   0 on success, a negative errno value otherwise and rte_errno is set.
 150  */
 151 static int
 152 rxq_alloc_elts_mprq(struct mlx5_rxq_ctrl *rxq_ctrl)
 153 {
 154         struct mlx5_rxq_data *rxq = &rxq_ctrl->rxq;
 155         unsigned int wqe_n = 1 << rxq->elts_n;
 156         unsigned int i;
 157         int err;
 158
 159         /* Iterate on segments. */
 160         for (i = 0; i <= wqe_n; ++i) {
 161                 struct mlx5_mprq_buf *buf;
 162
 163                 if (rte_mempool_get(rxq->mprq_mp, (void **)&buf) < 0) {
 164                         DRV_LOG(ERR, "port %u empty mbuf pool", rxq->port_id);
 165                         rte_errno = ENOMEM;
 166                         goto error;
 167                 }
 168                 if (i < wqe_n)
 169                         (*rxq->mprq_bufs)[i] = buf;
 170                 else
 171                         rxq->mprq_repl = buf;
 172         }
 173         DRV_LOG(DEBUG,
 174                 "port %u Rx queue %u allocated and configured %u segments",
 175                 rxq->port_id, rxq->idx, wqe_n);
 176         return 0;
 177 error:
 178         err = rte_errno; /* Save rte_errno before cleanup. */
 179         wqe_n = i;
 180         for (i = 0; (i != wqe_n); ++i) {
 181                 if ((*rxq->mprq_bufs)[i] != NULL)
 182                         rte_mempool_put(rxq->mprq_mp,
 183                                         (*rxq->mprq_bufs)[i]);
 184                 (*rxq->mprq_bufs)[i] = NULL;
 185         }
 186         DRV_LOG(DEBUG, "port %u Rx queue %u failed, freed everything",
 187                 rxq->port_id, rxq->idx);
 188         rte_errno = err; /* Restore rte_errno. */
 189         return -rte_errno;
 190 }
 191
 192 /**
 193  * Allocate RX queue elements for Single-Packet RQ.
 194  *
 195  * @param rxq_ctrl
 196  *   Pointer to RX queue structure.
 197  *
 198  * @return
 199  *   0 on success, errno value on failure.
 200  */
 201 static int
 202 rxq_alloc_elts_sprq(struct mlx5_rxq_ctrl *rxq_ctrl)
 203 {
 204         const unsigned int sges_n = 1 << rxq_ctrl->rxq.sges_n;
 205         unsigned int elts_n = 1 << rxq_ctrl->rxq.elts_n;
 206         unsigned int i;
 207         int err;
 208
 209         /* Iterate on segments. */
 210         for (i = 0; (i != elts_n); ++i) {
 211                 struct rte_mbuf *buf;
 212
 213                 buf = rte_pktmbuf_alloc(rxq_ctrl->rxq.mp);
 214                 if (buf == NULL) {
 215                         DRV_LOG(ERR, "port %u empty mbuf pool",
 216                                 PORT_ID(rxq_ctrl->priv));
 217                         rte_errno = ENOMEM;
 218                         goto error;
 219                 }
 220                 /* Headroom is reserved by rte_pktmbuf_alloc(). */
 221                 assert(DATA_OFF(buf) == RTE_PKTMBUF_HEADROOM);
 222                 /* Buffer is supposed to be empty. */
 223                 assert(rte_pktmbuf_data_len(buf) == 0);
 224                 assert(rte_pktmbuf_pkt_len(buf) == 0);
 225                 assert(!buf->next);
 226                 /* Only the first segment keeps headroom. */
 227                 if (i % sges_n)
 228                         SET_DATA_OFF(buf, 0);
 229                 PORT(buf) = rxq_ctrl->rxq.port_id;
 230                 DATA_LEN(buf) = rte_pktmbuf_tailroom(buf);
 231                 PKT_LEN(buf) = DATA_LEN(buf);
 232                 NB_SEGS(buf) = 1;
 233                 (*rxq_ctrl->rxq.elts)[i] = buf;
 234         }
 235         /* If Rx vector is activated. */
 236         if (mlx5_rxq_check_vec_support(&rxq_ctrl->rxq) > 0) {
 237                 struct mlx5_rxq_data *rxq = &rxq_ctrl->rxq;
 238                 struct rte_mbuf *mbuf_init = &rxq->fake_mbuf;
 239                 int j;
 240
 241                 /* Initialize default rearm_data for vPMD. */
 242                 mbuf_init->data_off = RTE_PKTMBUF_HEADROOM;
 243                 rte_mbuf_refcnt_set(mbuf_init, 1);
 244                 mbuf_init->nb_segs = 1;
 245                 mbuf_init->port = rxq->port_id;
 246                 /*
 247                  * prevent compiler reordering:
 248                  * rearm_data covers previous fields.
 249                  */
 250                 rte_compiler_barrier();
 251                 rxq->mbuf_initializer =
 252                         *(uint64_t *)&mbuf_init->rearm_data;
 253                 /* Padding with a fake mbuf for vectorized Rx. */
 254                 for (j = 0; j < MLX5_VPMD_DESCS_PER_LOOP; ++j)
 255                         (*rxq->elts)[elts_n + j] = &rxq->fake_mbuf;
 256         }
 257         DRV_LOG(DEBUG,
 258                 "port %u Rx queue %u allocated and configured %u segments"
 259                 " (max %u packets)",
 260                 PORT_ID(rxq_ctrl->priv), rxq_ctrl->rxq.idx, elts_n,
 261                 elts_n / (1 << rxq_ctrl->rxq.sges_n));
 262         return 0;
 263 error:
 264         err = rte_errno; /* Save rte_errno before cleanup. */
 265         elts_n = i;
 266         for (i = 0; (i != elts_n); ++i) {
 267                 if ((*rxq_ctrl->rxq.elts)[i] != NULL)
 268                         rte_pktmbuf_free_seg((*rxq_ctrl->rxq.elts)[i]);
 269                 (*rxq_ctrl->rxq.elts)[i] = NULL;
 270         }
 271         DRV_LOG(DEBUG, "port %u Rx queue %u failed, freed everything",
 272                 PORT_ID(rxq_ctrl->priv), rxq_ctrl->rxq.idx);
 273         rte_errno = err; /* Restore rte_errno. */
 274         return -rte_errno;
 275 }
 276
 277 /**
 278  * Allocate RX queue elements.
 279  *
 280  * @param rxq_ctrl
 281  *   Pointer to RX queue structure.
 282  *
 283  * @return
 284  *   0 on success, errno value on failure.
 285  */
 286 int
 287 rxq_alloc_elts(struct mlx5_rxq_ctrl *rxq_ctrl)
 288 {
 289         return mlx5_rxq_mprq_enabled(&rxq_ctrl->rxq) ?
 290                rxq_alloc_elts_mprq(rxq_ctrl) : rxq_alloc_elts_sprq(rxq_ctrl);
 291 }
 292
 293 /**
 294  * Free RX queue elements for Multi-Packet RQ.
 295  *
 296  * @param rxq_ctrl
 297  *   Pointer to RX queue structure.
 298  */
 299 static void
 300 rxq_free_elts_mprq(struct mlx5_rxq_ctrl *rxq_ctrl)
 301 {
 302         struct mlx5_rxq_data *rxq = &rxq_ctrl->rxq;
 303         uint16_t i;
 304
 305         DRV_LOG(DEBUG, "port %u Multi-Packet Rx queue %u freeing WRs",
 306                 rxq->port_id, rxq->idx);
 307         if (rxq->mprq_bufs == NULL)
 308                 return;
 309         assert(mlx5_rxq_check_vec_support(rxq) < 0);
 310         for (i = 0; (i != (1u << rxq->elts_n)); ++i) {
 311                 if ((*rxq->mprq_bufs)[i] != NULL)
 312                         mlx5_mprq_buf_free((*rxq->mprq_bufs)[i]);
 313                 (*rxq->mprq_bufs)[i] = NULL;
 314         }
 315         if (rxq->mprq_repl != NULL) {
 316                 mlx5_mprq_buf_free(rxq->mprq_repl);
 317                 rxq->mprq_repl = NULL;
 318         }
 319 }
 320
 321 /**
 322  * Free RX queue elements for Single-Packet RQ.
 323  *
 324  * @param rxq_ctrl
 325  *   Pointer to RX queue structure.
 326  */
 327 static void
 328 rxq_free_elts_sprq(struct mlx5_rxq_ctrl *rxq_ctrl)
 329 {
 330         struct mlx5_rxq_data *rxq = &rxq_ctrl->rxq;
 331         const uint16_t q_n = (1 << rxq->elts_n);
 332         const uint16_t q_mask = q_n - 1;
 333         uint16_t used = q_n - (rxq->rq_ci - rxq->rq_pi);
 334         uint16_t i;
 335
 336         DRV_LOG(DEBUG, "port %u Rx queue %u freeing WRs",
 337                 PORT_ID(rxq_ctrl->priv), rxq->idx);
 338         if (rxq->elts == NULL)
 339                 return;
 340         /**
 341          * Some mbuf in the Ring belongs to the application.  They cannot be
 342          * freed.
 343          */
 344         if (mlx5_rxq_check_vec_support(rxq) > 0) {
 345                 for (i = 0; i < used; ++i)
 346                         (*rxq->elts)[(rxq->rq_ci + i) & q_mask] = NULL;
 347                 rxq->rq_pi = rxq->rq_ci;
 348         }
 349         for (i = 0; (i != (1u << rxq->elts_n)); ++i) {
 350                 if ((*rxq->elts)[i] != NULL)
 351                         rte_pktmbuf_free_seg((*rxq->elts)[i]);
 352                 (*rxq->elts)[i] = NULL;
 353         }
 354 }
 355
 356 /**
 357  * Free RX queue elements.
 358  *
 359  * @param rxq_ctrl
 360  *   Pointer to RX queue structure.
 361  */
 362 static void
 363 rxq_free_elts(struct mlx5_rxq_ctrl *rxq_ctrl)
 364 {
 365         if (mlx5_rxq_mprq_enabled(&rxq_ctrl->rxq))
 366                 rxq_free_elts_mprq(rxq_ctrl);
 367         else
 368                 rxq_free_elts_sprq(rxq_ctrl);
 369 }
 370
 371 /**
 372  * Returns the per-queue supported offloads.
 373  *
 374  * @param dev
 375  *   Pointer to Ethernet device.
 376  *
 377  * @return
 378  *   Supported Rx offloads.
 379  */
 380 uint64_t
 381 mlx5_get_rx_queue_offloads(struct rte_eth_dev *dev)
 382 {
 383         struct mlx5_priv *priv = dev->data->dev_private;
 384         struct mlx5_dev_config *config = &priv->config;
 385         uint64_t offloads = (DEV_RX_OFFLOAD_SCATTER |
 386                              DEV_RX_OFFLOAD_TIMESTAMP |
 387                              DEV_RX_OFFLOAD_JUMBO_FRAME);
 388
 389         if (config->hw_fcs_strip)
 390                 offloads |= DEV_RX_OFFLOAD_KEEP_CRC;
 391
 392         if (config->hw_csum)
 393                 offloads |= (DEV_RX_OFFLOAD_IPV4_CKSUM |
 394                              DEV_RX_OFFLOAD_UDP_CKSUM |
 395                              DEV_RX_OFFLOAD_TCP_CKSUM);
 396         if (config->hw_vlan_strip)
 397                 offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
 398         return offloads;
 399 }
 400
 401
 402 /**
 403  * Returns the per-port supported offloads.
 404  *
 405  * @param dev
 406  *   Pointer to Ethernet device.
 407  *
 408  * @return
 409  *   Supported Rx offloads.
 410  */
 411 uint64_t
 412 mlx5_get_rx_port_offloads(struct rte_eth_dev *dev)
 413 {
 414         uint64_t offloads = DEV_RX_OFFLOAD_VLAN_FILTER;
 415
 416         if (MLX5_LRO_SUPPORTED(dev))
 417                 offloads |= DEV_RX_OFFLOAD_TCP_LRO;
 418         return offloads;
 419 }
 420
 421 /**
 422  * Verify if the queue can be released.
 423  *
 424  * @param dev
 425  *   Pointer to Ethernet device.
 426  * @param idx
 427  *   RX queue index.
 428  *
 429  * @return
 430  *   1 if the queue can be released
 431  *   0 if the queue can not be released, there are references to it.
 432  *   Negative errno and rte_errno is set if queue doesn't exist.
 433  */
 434 static int
 435 mlx5_rxq_releasable(struct rte_eth_dev *dev, uint16_t idx)
 436 {
 437         struct mlx5_priv *priv = dev->data->dev_private;
 438         struct mlx5_rxq_ctrl *rxq_ctrl;
 439
 440         if (!(*priv->rxqs)[idx]) {
 441                 rte_errno = EINVAL;
 442                 return -rte_errno;
 443         }
 444         rxq_ctrl = container_of((*priv->rxqs)[idx], struct mlx5_rxq_ctrl, rxq);
 445         return (rte_atomic32_read(&rxq_ctrl->refcnt) == 1);
 446 }
 447
 448 /**
 449  *
 450  * @param dev
 451  *   Pointer to Ethernet device structure.
 452  * @param idx
 453  *   RX queue index.
 454  * @param desc
 455  *   Number of descriptors to configure in queue.
 456  * @param socket
 457  *   NUMA socket on which memory must be allocated.
 458  * @param[in] conf
 459  *   Thresholds parameters.
 460  * @param mp
 461  *   Memory pool for buffer allocations.
 462  *
 463  * @return
 464  *   0 on success, a negative errno value otherwise and rte_errno is set.
 465  */
 466 int
 467 mlx5_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 468                     unsigned int socket, const struct rte_eth_rxconf *conf,
 469                     struct rte_mempool *mp)
 470 {
 471         struct mlx5_priv *priv = dev->data->dev_private;
 472         struct mlx5_rxq_data *rxq = (*priv->rxqs)[idx];
 473         struct mlx5_rxq_ctrl *rxq_ctrl =
 474                 container_of(rxq, struct mlx5_rxq_ctrl, rxq);
 475
 476         if (!rte_is_power_of_2(desc)) {
 477                 desc = 1 << log2above(desc);
 478                 DRV_LOG(WARNING,
 479                         "port %u increased number of descriptors in Rx queue %u"
 480                         " to the next power of two (%d)",
 481                         dev->data->port_id, idx, desc);
 482         }
 483         DRV_LOG(DEBUG, "port %u configuring Rx queue %u for %u descriptors",
 484                 dev->data->port_id, idx, desc);
 485         if (idx >= priv->rxqs_n) {
 486                 DRV_LOG(ERR, "port %u Rx queue index out of range (%u >= %u)",
 487                         dev->data->port_id, idx, priv->rxqs_n);
 488                 rte_errno = EOVERFLOW;
 489                 return -rte_errno;
 490         }
 491         if (!mlx5_rxq_releasable(dev, idx)) {
 492                 DRV_LOG(ERR, "port %u unable to release queue index %u",
 493                         dev->data->port_id, idx);
 494                 rte_errno = EBUSY;
 495                 return -rte_errno;
 496         }
 497         mlx5_rxq_release(dev, idx);
 498         rxq_ctrl = mlx5_rxq_new(dev, idx, desc, socket, conf, mp);
 499         if (!rxq_ctrl) {
 500                 DRV_LOG(ERR, "port %u unable to allocate queue index %u",
 501                         dev->data->port_id, idx);
 502                 rte_errno = ENOMEM;
 503                 return -rte_errno;
 504         }
 505         DRV_LOG(DEBUG, "port %u adding Rx queue %u to list",
 506                 dev->data->port_id, idx);
 507         (*priv->rxqs)[idx] = &rxq_ctrl->rxq;
 508         return 0;
 509 }
 510
 511 /**
 512  * DPDK callback to release a RX queue.
 513  *
 514  * @param dpdk_rxq
 515  *   Generic RX queue pointer.
 516  */
 517 void
 518 mlx5_rx_queue_release(void *dpdk_rxq)
 519 {
 520         struct mlx5_rxq_data *rxq = (struct mlx5_rxq_data *)dpdk_rxq;
 521         struct mlx5_rxq_ctrl *rxq_ctrl;
 522         struct mlx5_priv *priv;
 523
 524         if (rxq == NULL)
 525                 return;
 526         rxq_ctrl = container_of(rxq, struct mlx5_rxq_ctrl, rxq);
 527         priv = rxq_ctrl->priv;
 528         if (!mlx5_rxq_releasable(ETH_DEV(priv), rxq_ctrl->rxq.idx))
 529                 rte_panic("port %u Rx queue %u is still used by a flow and"
 530                           " cannot be removed\n",
 531                           PORT_ID(priv), rxq->idx);
 532         mlx5_rxq_release(ETH_DEV(priv), rxq_ctrl->rxq.idx);
 533 }
 534
 535 /**
 536  * Get an Rx queue Verbs/DevX object.
 537  *
 538  * @param dev
 539  *   Pointer to Ethernet device.
 540  * @param idx
 541  *   Queue index in DPDK Rx queue array
 542  *
 543  * @return
 544  *   The Verbs/DevX object if it exists.
 545  */
 546 static struct mlx5_rxq_obj *
 547 mlx5_rxq_obj_get(struct rte_eth_dev *dev, uint16_t idx)
 548 {
 549         struct mlx5_priv *priv = dev->data->dev_private;
 550         struct mlx5_rxq_data *rxq_data = (*priv->rxqs)[idx];
 551         struct mlx5_rxq_ctrl *rxq_ctrl;
 552
 553         if (idx >= priv->rxqs_n)
 554                 return NULL;
 555         if (!rxq_data)
 556                 return NULL;
 557         rxq_ctrl = container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
 558         if (rxq_ctrl->obj)
 559                 rte_atomic32_inc(&rxq_ctrl->obj->refcnt);
 560         return rxq_ctrl->obj;
 561 }
 562
 563 /**
 564  * Release the resources allocated for an RQ DevX object.
 565  *
 566  * @param rxq_ctrl
 567  *   DevX Rx queue object.
 568  */
 569 static void
 570 rxq_release_rq_resources(struct mlx5_rxq_ctrl *rxq_ctrl)
 571 {
 572         if (rxq_ctrl->rxq.wqes) {
 573                 rte_free((void *)(uintptr_t)rxq_ctrl->rxq.wqes);
 574                 rxq_ctrl->rxq.wqes = NULL;
 575         }
 576         if (rxq_ctrl->wq_umem) {
 577                 mlx5_glue->devx_umem_dereg(rxq_ctrl->wq_umem);
 578                 rxq_ctrl->wq_umem = NULL;
 579         }
 580 }
 581
 582 /**
 583  * Release an Rx verbs/DevX queue object.
 584  *
 585  * @param rxq_obj
 586  *   Verbs/DevX Rx queue object.
 587  *
 588  * @return
 589  *   1 while a reference on it exists, 0 when freed.
 590  */
 591 static int
 592 mlx5_rxq_obj_release(struct mlx5_rxq_obj *rxq_obj)
 593 {
 594         assert(rxq_obj);
 595         if (rxq_obj->type == MLX5_RXQ_OBJ_TYPE_IBV)
 596                 assert(rxq_obj->wq);
 597         assert(rxq_obj->cq);
 598         if (rte_atomic32_dec_and_test(&rxq_obj->refcnt)) {
 599                 rxq_free_elts(rxq_obj->rxq_ctrl);
 600                 if (rxq_obj->type == MLX5_RXQ_OBJ_TYPE_IBV) {
 601                         claim_zero(mlx5_glue->destroy_wq(rxq_obj->wq));
 602                 } else if (rxq_obj->type == MLX5_RXQ_OBJ_TYPE_DEVX_RQ) {
 603                         claim_zero(mlx5_devx_cmd_destroy(rxq_obj->rq));
 604                         rxq_release_rq_resources(rxq_obj->rxq_ctrl);
 605                 }
 606                 claim_zero(mlx5_glue->destroy_cq(rxq_obj->cq));
 607                 if (rxq_obj->channel)
 608                         claim_zero(mlx5_glue->destroy_comp_channel
 609                                    (rxq_obj->channel));
 610                 LIST_REMOVE(rxq_obj, next);
 611                 rte_free(rxq_obj);
 612                 return 0;
 613         }
 614         return 1;
 615 }
 616
 617 /**
 618  * Allocate queue vector and fill epoll fd list for Rx interrupts.
 619  *
 620  * @param dev
 621  *   Pointer to Ethernet device.
 622  *
 623  * @return
 624  *   0 on success, a negative errno value otherwise and rte_errno is set.
 625  */
 626 int
 627 mlx5_rx_intr_vec_enable(struct rte_eth_dev *dev)
 628 {
 629         struct mlx5_priv *priv = dev->data->dev_private;
 630         unsigned int i;
 631         unsigned int rxqs_n = priv->rxqs_n;
 632         unsigned int n = RTE_MIN(rxqs_n, (uint32_t)RTE_MAX_RXTX_INTR_VEC_ID);
 633         unsigned int count = 0;
 634         struct rte_intr_handle *intr_handle = dev->intr_handle;
 635
 636         if (!dev->data->dev_conf.intr_conf.rxq)
 637                 return 0;
 638         mlx5_rx_intr_vec_disable(dev);
 639         intr_handle->intr_vec = malloc(n * sizeof(intr_handle->intr_vec[0]));
 640         if (intr_handle->intr_vec == NULL) {
 641                 DRV_LOG(ERR,
 642                         "port %u failed to allocate memory for interrupt"
 643                         " vector, Rx interrupts will not be supported",
 644                         dev->data->port_id);
 645                 rte_errno = ENOMEM;
 646                 return -rte_errno;
 647         }
 648         intr_handle->type = RTE_INTR_HANDLE_EXT;
 649         for (i = 0; i != n; ++i) {
 650                 /* This rxq obj must not be released in this function. */
 651                 struct mlx5_rxq_obj *rxq_obj = mlx5_rxq_obj_get(dev, i);
 652                 int fd;
 653                 int flags;
 654                 int rc;
 655
 656                 /* Skip queues that cannot request interrupts. */
 657                 if (!rxq_obj || !rxq_obj->channel) {
 658                         /* Use invalid intr_vec[] index to disable entry. */
 659                         intr_handle->intr_vec[i] =
 660                                 RTE_INTR_VEC_RXTX_OFFSET +
 661                                 RTE_MAX_RXTX_INTR_VEC_ID;
 662                         continue;
 663                 }
 664                 if (count >= RTE_MAX_RXTX_INTR_VEC_ID) {
 665                         DRV_LOG(ERR,
 666                                 "port %u too many Rx queues for interrupt"
 667                                 " vector size (%d), Rx interrupts cannot be"
 668                                 " enabled",
 669                                 dev->data->port_id, RTE_MAX_RXTX_INTR_VEC_ID);
 670                         mlx5_rx_intr_vec_disable(dev);
 671                         rte_errno = ENOMEM;
 672                         return -rte_errno;
 673                 }
 674                 fd = rxq_obj->channel->fd;
 675                 flags = fcntl(fd, F_GETFL);
 676                 rc = fcntl(fd, F_SETFL, flags | O_NONBLOCK);
 677                 if (rc < 0) {
 678                         rte_errno = errno;
 679                         DRV_LOG(ERR,
 680                                 "port %u failed to make Rx interrupt file"
 681                                 " descriptor %d non-blocking for queue index"
 682                                 " %d",
 683                                 dev->data->port_id, fd, i);
 684                         mlx5_rx_intr_vec_disable(dev);
 685                         return -rte_errno;
 686                 }
 687                 intr_handle->intr_vec[i] = RTE_INTR_VEC_RXTX_OFFSET + count;
 688                 intr_handle->efds[count] = fd;
 689                 count++;
 690         }
 691         if (!count)
 692                 mlx5_rx_intr_vec_disable(dev);
 693         else
 694                 intr_handle->nb_efd = count;
 695         return 0;
 696 }
 697
 698 /**
 699  * Clean up Rx interrupts handler.
 700  *
 701  * @param dev
 702  *   Pointer to Ethernet device.
 703  */
 704 void
 705 mlx5_rx_intr_vec_disable(struct rte_eth_dev *dev)
 706 {
 707         struct mlx5_priv *priv = dev->data->dev_private;
 708         struct rte_intr_handle *intr_handle = dev->intr_handle;
 709         unsigned int i;
 710         unsigned int rxqs_n = priv->rxqs_n;
 711         unsigned int n = RTE_MIN(rxqs_n, (uint32_t)RTE_MAX_RXTX_INTR_VEC_ID);
 712
 713         if (!dev->data->dev_conf.intr_conf.rxq)
 714                 return;
 715         if (!intr_handle->intr_vec)
 716                 goto free;
 717         for (i = 0; i != n; ++i) {
 718                 struct mlx5_rxq_ctrl *rxq_ctrl;
 719                 struct mlx5_rxq_data *rxq_data;
 720
 721                 if (intr_handle->intr_vec[i] == RTE_INTR_VEC_RXTX_OFFSET +
 722                     RTE_MAX_RXTX_INTR_VEC_ID)
 723                         continue;
 724                 /**
 725                  * Need to access directly the queue to release the reference
 726                  * kept in mlx5_rx_intr_vec_enable().
 727                  */
 728                 rxq_data = (*priv->rxqs)[i];
 729                 rxq_ctrl = container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
 730                 if (rxq_ctrl->obj)
 731                         mlx5_rxq_obj_release(rxq_ctrl->obj);
 732         }
 733 free:
 734         rte_intr_free_epoll_fd(intr_handle);
 735         if (intr_handle->intr_vec)
 736                 free(intr_handle->intr_vec);
 737         intr_handle->nb_efd = 0;
 738         intr_handle->intr_vec = NULL;
 739 }
 740
 741 /**
 742  *  MLX5 CQ notification .
 743  *
 744  *  @param rxq
 745  *     Pointer to receive queue structure.
 746  *  @param sq_n_rxq
 747  *     Sequence number per receive queue .
 748  */
 749 static inline void
 750 mlx5_arm_cq(struct mlx5_rxq_data *rxq, int sq_n_rxq)
 751 {
 752         int sq_n = 0;
 753         uint32_t doorbell_hi;
 754         uint64_t doorbell;
 755         void *cq_db_reg = (char *)rxq->cq_uar + MLX5_CQ_DOORBELL;
 756
 757         sq_n = sq_n_rxq & MLX5_CQ_SQN_MASK;
 758         doorbell_hi = sq_n << MLX5_CQ_SQN_OFFSET | (rxq->cq_ci & MLX5_CI_MASK);
 759         doorbell = (uint64_t)doorbell_hi << 32;
 760         doorbell |=  rxq->cqn;
 761         rxq->cq_db[MLX5_CQ_ARM_DB] = rte_cpu_to_be_32(doorbell_hi);
 762         mlx5_uar_write64(rte_cpu_to_be_64(doorbell),
 763                          cq_db_reg, rxq->uar_lock_cq);
 764 }
 765
 766 /**
 767  * DPDK callback for Rx queue interrupt enable.
 768  *
 769  * @param dev
 770  *   Pointer to Ethernet device structure.
 771  * @param rx_queue_id
 772  *   Rx queue number.
 773  *
 774  * @return
 775  *   0 on success, a negative errno value otherwise and rte_errno is set.
 776  */
 777 int
 778 mlx5_rx_intr_enable(struct rte_eth_dev *dev, uint16_t rx_queue_id)
 779 {
 780         struct mlx5_priv *priv = dev->data->dev_private;
 781         struct mlx5_rxq_data *rxq_data;
 782         struct mlx5_rxq_ctrl *rxq_ctrl;
 783
 784         rxq_data = (*priv->rxqs)[rx_queue_id];
 785         if (!rxq_data) {
 786                 rte_errno = EINVAL;
 787                 return -rte_errno;
 788         }
 789         rxq_ctrl = container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
 790         if (rxq_ctrl->irq) {
 791                 struct mlx5_rxq_obj *rxq_obj;
 792
 793                 rxq_obj = mlx5_rxq_obj_get(dev, rx_queue_id);
 794                 if (!rxq_obj) {
 795                         rte_errno = EINVAL;
 796                         return -rte_errno;
 797                 }
 798                 mlx5_arm_cq(rxq_data, rxq_data->cq_arm_sn);
 799                 mlx5_rxq_obj_release(rxq_obj);
 800         }
 801         return 0;
 802 }
 803
 804 /**
 805  * DPDK callback for Rx queue interrupt disable.
 806  *
 807  * @param dev
 808  *   Pointer to Ethernet device structure.
 809  * @param rx_queue_id
 810  *   Rx queue number.
 811  *
 812  * @return
 813  *   0 on success, a negative errno value otherwise and rte_errno is set.
 814  */
 815 int
 816 mlx5_rx_intr_disable(struct rte_eth_dev *dev, uint16_t rx_queue_id)
 817 {
 818         struct mlx5_priv *priv = dev->data->dev_private;
 819         struct mlx5_rxq_data *rxq_data;
 820         struct mlx5_rxq_ctrl *rxq_ctrl;
 821         struct mlx5_rxq_obj *rxq_obj = NULL;
 822         struct ibv_cq *ev_cq;
 823         void *ev_ctx;
 824         int ret;
 825
 826         rxq_data = (*priv->rxqs)[rx_queue_id];
 827         if (!rxq_data) {
 828                 rte_errno = EINVAL;
 829                 return -rte_errno;
 830         }
 831         rxq_ctrl = container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
 832         if (!rxq_ctrl->irq)
 833                 return 0;
 834         rxq_obj = mlx5_rxq_obj_get(dev, rx_queue_id);
 835         if (!rxq_obj) {
 836                 rte_errno = EINVAL;
 837                 return -rte_errno;
 838         }
 839         ret = mlx5_glue->get_cq_event(rxq_obj->channel, &ev_cq, &ev_ctx);
 840         if (ret || ev_cq != rxq_obj->cq) {
 841                 rte_errno = EINVAL;
 842                 goto exit;
 843         }
 844         rxq_data->cq_arm_sn++;
 845         mlx5_glue->ack_cq_events(rxq_obj->cq, 1);
 846         mlx5_rxq_obj_release(rxq_obj);
 847         return 0;
 848 exit:
 849         ret = rte_errno; /* Save rte_errno before cleanup. */
 850         if (rxq_obj)
 851                 mlx5_rxq_obj_release(rxq_obj);
 852         DRV_LOG(WARNING, "port %u unable to disable interrupt on Rx queue %d",
 853                 dev->data->port_id, rx_queue_id);
 854         rte_errno = ret; /* Restore rte_errno. */
 855         return -rte_errno;
 856 }
 857
 858 /**
 859  * Create a CQ Verbs object.
 860  *
 861  * @param dev
 862  *   Pointer to Ethernet device.
 863  * @param priv
 864  *   Pointer to device private data.
 865  * @param rxq_data
 866  *   Pointer to Rx queue data.
 867  * @param cqe_n
 868  *   Number of CQEs in CQ.
 869  * @param rxq_obj
 870  *   Pointer to Rx queue object data.
 871  *
 872  * @return
 873  *   The Verbs object initialised, NULL otherwise and rte_errno is set.
 874  */
 875 static struct ibv_cq *
 876 mlx5_ibv_cq_new(struct rte_eth_dev *dev, struct mlx5_priv *priv,
 877                 struct mlx5_rxq_data *rxq_data,
 878                 unsigned int cqe_n, struct mlx5_rxq_obj *rxq_obj)
 879 {
 880         struct {
 881                 struct ibv_cq_init_attr_ex ibv;
 882                 struct mlx5dv_cq_init_attr mlx5;
 883         } cq_attr;
 884
 885         cq_attr.ibv = (struct ibv_cq_init_attr_ex){
 886                 .cqe = cqe_n,
 887                 .channel = rxq_obj->channel,
 888                 .comp_mask = 0,
 889         };
 890         cq_attr.mlx5 = (struct mlx5dv_cq_init_attr){
 891                 .comp_mask = 0,
 892         };
 893         if (priv->config.cqe_comp && !rxq_data->hw_timestamp) {
 894                 cq_attr.mlx5.comp_mask |=
 895                                 MLX5DV_CQ_INIT_ATTR_MASK_COMPRESSED_CQE;
 896 #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
 897                 cq_attr.mlx5.cqe_comp_res_format =
 898                                 mlx5_rxq_mprq_enabled(rxq_data) ?
 899                                 MLX5DV_CQE_RES_FORMAT_CSUM_STRIDX :
 900                                 MLX5DV_CQE_RES_FORMAT_HASH;
 901 #else
 902                 cq_attr.mlx5.cqe_comp_res_format = MLX5DV_CQE_RES_FORMAT_HASH;
 903 #endif
 904                 /*
 905                  * For vectorized Rx, it must not be doubled in order to
 906                  * make cq_ci and rq_ci aligned.
 907                  */
 908                 if (mlx5_rxq_check_vec_support(rxq_data) < 0)
 909                         cq_attr.ibv.cqe *= 2;
 910         } else if (priv->config.cqe_comp && rxq_data->hw_timestamp) {
 911                 DRV_LOG(DEBUG,
 912                         "port %u Rx CQE compression is disabled for HW"
 913                         " timestamp",
 914                         dev->data->port_id);
 915         }
 916 #ifdef HAVE_IBV_MLX5_MOD_CQE_128B_PAD
 917         if (priv->config.cqe_pad) {
 918                 cq_attr.mlx5.comp_mask |= MLX5DV_CQ_INIT_ATTR_MASK_FLAGS;
 919                 cq_attr.mlx5.flags |= MLX5DV_CQ_INIT_ATTR_FLAGS_CQE_PAD;
 920         }
 921 #endif
 922         return mlx5_glue->cq_ex_to_cq(mlx5_glue->dv_create_cq(priv->sh->ctx,
 923                                                               &cq_attr.ibv,
 924                                                               &cq_attr.mlx5));
 925 }
 926
 927 /**
 928  * Create a WQ Verbs object.
 929  *
 930  * @param dev
 931  *   Pointer to Ethernet device.
 932  * @param priv
 933  *   Pointer to device private data.
 934  * @param rxq_data
 935  *   Pointer to Rx queue data.
 936  * @param idx
 937  *   Queue index in DPDK Rx queue array
 938  * @param wqe_n
 939  *   Number of WQEs in WQ.
 940  * @param rxq_obj
 941  *   Pointer to Rx queue object data.
 942  *
 943  * @return
 944  *   The Verbs object initialised, NULL otherwise and rte_errno is set.
 945  */
 946 static struct ibv_wq *
 947 mlx5_ibv_wq_new(struct rte_eth_dev *dev, struct mlx5_priv *priv,
 948                 struct mlx5_rxq_data *rxq_data, uint16_t idx,
 949                 unsigned int wqe_n, struct mlx5_rxq_obj *rxq_obj)
 950 {
 951         struct {
 952                 struct ibv_wq_init_attr ibv;
 953 #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
 954                 struct mlx5dv_wq_init_attr mlx5;
 955 #endif
 956         } wq_attr;
 957
 958         wq_attr.ibv = (struct ibv_wq_init_attr){
 959                 .wq_context = NULL, /* Could be useful in the future. */
 960                 .wq_type = IBV_WQT_RQ,
 961                 /* Max number of outstanding WRs. */
 962                 .max_wr = wqe_n >> rxq_data->sges_n,
 963                 /* Max number of scatter/gather elements in a WR. */
 964                 .max_sge = 1 << rxq_data->sges_n,
 965                 .pd = priv->sh->pd,
 966                 .cq = rxq_obj->cq,
 967                 .comp_mask = IBV_WQ_FLAGS_CVLAN_STRIPPING | 0,
 968                 .create_flags = (rxq_data->vlan_strip ?
 969                                  IBV_WQ_FLAGS_CVLAN_STRIPPING : 0),
 970         };
 971         /* By default, FCS (CRC) is stripped by hardware. */
 972         if (rxq_data->crc_present) {
 973                 wq_attr.ibv.create_flags |= IBV_WQ_FLAGS_SCATTER_FCS;
 974                 wq_attr.ibv.comp_mask |= IBV_WQ_INIT_ATTR_FLAGS;
 975         }
 976         if (priv->config.hw_padding) {
 977 #if defined(HAVE_IBV_WQ_FLAG_RX_END_PADDING)
 978                 wq_attr.ibv.create_flags |= IBV_WQ_FLAG_RX_END_PADDING;
 979                 wq_attr.ibv.comp_mask |= IBV_WQ_INIT_ATTR_FLAGS;
 980 #elif defined(HAVE_IBV_WQ_FLAGS_PCI_WRITE_END_PADDING)
 981                 wq_attr.ibv.create_flags |= IBV_WQ_FLAGS_PCI_WRITE_END_PADDING;
 982                 wq_attr.ibv.comp_mask |= IBV_WQ_INIT_ATTR_FLAGS;
 983 #endif
 984         }
 985 #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
 986         wq_attr.mlx5 = (struct mlx5dv_wq_init_attr){
 987                 .comp_mask = 0,
 988         };
 989         if (mlx5_rxq_mprq_enabled(rxq_data)) {
 990                 struct mlx5dv_striding_rq_init_attr *mprq_attr =
 991                                                 &wq_attr.mlx5.striding_rq_attrs;
 992
 993                 wq_attr.mlx5.comp_mask |= MLX5DV_WQ_INIT_ATTR_MASK_STRIDING_RQ;
 994                 *mprq_attr = (struct mlx5dv_striding_rq_init_attr){
 995                         .single_stride_log_num_of_bytes = rxq_data->strd_sz_n,
 996                         .single_wqe_log_num_of_strides = rxq_data->strd_num_n,
 997                         .two_byte_shift_en = MLX5_MPRQ_TWO_BYTE_SHIFT,
 998                 };
 999         }
1000         rxq_obj->wq = mlx5_glue->dv_create_wq(priv->sh->ctx, &wq_attr.ibv,
1001                                               &wq_attr.mlx5);
1002 #else
1003         rxq_obj->wq = mlx5_glue->create_wq(priv->sh->ctx, &wq_attr.ibv);
1004 #endif
1005         if (rxq_obj->wq) {
1006                 /*
1007                  * Make sure number of WRs*SGEs match expectations since a queue
1008                  * cannot allocate more than "desc" buffers.
1009                  */
1010                 if (wq_attr.ibv.max_wr != (wqe_n >> rxq_data->sges_n) ||
1011                     wq_attr.ibv.max_sge != (1u << rxq_data->sges_n)) {
1012                         DRV_LOG(ERR,
1013                                 "port %u Rx queue %u requested %u*%u but got"
1014                                 " %u*%u WRs*SGEs",
1015                                 dev->data->port_id, idx,
1016                                 wqe_n >> rxq_data->sges_n,
1017                                 (1 << rxq_data->sges_n),
1018                                 wq_attr.ibv.max_wr, wq_attr.ibv.max_sge);
1019                         claim_zero(mlx5_glue->destroy_wq(rxq_obj->wq));
1020                         rxq_obj->wq = NULL;
1021                         rte_errno = EINVAL;
1022                 }
1023         }
1024         return rxq_obj->wq;
1025 }
1026
1027 /**
1028  * Fill common fields of create RQ attributes structure.
1029  *
1030  * @param rxq_data
1031  *   Pointer to Rx queue data.
1032  * @param cqn
1033  *   CQ number to use with this RQ.
1034  * @param rq_attr
1035  *   RQ attributes structure to fill..
1036  */
1037 static void
1038 mlx5_devx_create_rq_attr_fill(struct mlx5_rxq_data *rxq_data, uint32_t cqn,
1039                               struct mlx5_devx_create_rq_attr *rq_attr)
1040 {
1041         rq_attr->state = MLX5_RQC_STATE_RST;
1042         rq_attr->vsd = (rxq_data->vlan_strip) ? 0 : 1;
1043         rq_attr->cqn = cqn;
1044         rq_attr->scatter_fcs = (rxq_data->crc_present) ? 1 : 0;
1045 }
1046
1047 /**
1048  * Fill common fields of DevX WQ attributes structure.
1049  *
1050  * @param priv
1051  *   Pointer to device private data.
1052  * @param rxq_ctrl
1053  *   Pointer to Rx queue control structure.
1054  * @param wq_attr
1055  *   WQ attributes structure to fill..
1056  */
1057 static void
1058 mlx5_devx_wq_attr_fill(struct mlx5_priv *priv, struct mlx5_rxq_ctrl *rxq_ctrl,
1059                        struct mlx5_devx_wq_attr *wq_attr)
1060 {
1061         wq_attr->end_padding_mode = priv->config.cqe_pad ?
1062                                         MLX5_WQ_END_PAD_MODE_ALIGN :
1063                                         MLX5_WQ_END_PAD_MODE_NONE;
1064         wq_attr->pd = priv->sh->pdn;
1065         wq_attr->dbr_addr = rxq_ctrl->dbr_offset;
1066         wq_attr->dbr_umem_id = rxq_ctrl->dbr_umem_id;
1067         wq_attr->dbr_umem_valid = 1;
1068         wq_attr->wq_umem_id = rxq_ctrl->wq_umem->umem_id;
1069         wq_attr->wq_umem_valid = 1;
1070 }
1071
1072 /**
1073  * Create a RQ object using DevX.
1074  *
1075  * @param dev
1076  *   Pointer to Ethernet device.
1077  * @param idx
1078  *   Queue index in DPDK Rx queue array
1079  * @param cqn
1080  *   CQ number to use with this RQ.
1081  *
1082  * @return
1083  *   The DevX object initialised, NULL otherwise and rte_errno is set.
1084  */
1085 static struct mlx5_devx_obj *
1086 mlx5_devx_rq_new(struct rte_eth_dev *dev, uint16_t idx, uint32_t cqn)
1087 {
1088         struct mlx5_priv *priv = dev->data->dev_private;
1089         struct mlx5_rxq_data *rxq_data = (*priv->rxqs)[idx];
1090         struct mlx5_rxq_ctrl *rxq_ctrl =
1091                 container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
1092         struct mlx5_devx_create_rq_attr rq_attr;
1093         uint32_t wqe_n = 1 << rxq_data->elts_n;
1094         uint32_t wq_size = 0;
1095         uint32_t wqe_size = 0;
1096         uint32_t log_wqe_size = 0;
1097         void *buf = NULL;
1098         struct mlx5_devx_obj *rq;
1099
1100         memset(&rq_attr, 0, sizeof(rq_attr));
1101         /* Fill RQ attributes. */
1102         rq_attr.mem_rq_type = MLX5_RQC_MEM_RQ_TYPE_MEMORY_RQ_INLINE;
1103         rq_attr.flush_in_error_en = 1;
1104         mlx5_devx_create_rq_attr_fill(rxq_data, cqn, &rq_attr);
1105         /* Fill WQ attributes for this RQ. */
1106         if (mlx5_rxq_mprq_enabled(rxq_data)) {
1107                 rq_attr.wq_attr.wq_type = MLX5_WQ_TYPE_CYCLIC_STRIDING_RQ;
1108                 /*
1109                  * Number of strides in each WQE:
1110                  * 512*2^single_wqe_log_num_of_strides.
1111                  */
1112                 rq_attr.wq_attr.single_wqe_log_num_of_strides =
1113                                 rxq_data->strd_num_n -
1114                                 MLX5_MIN_SINGLE_WQE_LOG_NUM_STRIDES;
1115                 /* Stride size = (2^single_stride_log_num_of_bytes)*64B. */
1116                 rq_attr.wq_attr.single_stride_log_num_of_bytes =
1117                                 rxq_data->strd_sz_n -
1118                                 MLX5_MIN_SINGLE_STRIDE_LOG_NUM_BYTES;
1119                 wqe_size = sizeof(struct mlx5_wqe_mprq);
1120         } else {
1121                 int max_sge = 0;
1122                 int num_scatter = 0;
1123
1124                 rq_attr.wq_attr.wq_type = MLX5_WQ_TYPE_CYCLIC;
1125                 max_sge = 1 << rxq_data->sges_n;
1126                 num_scatter = RTE_MAX(max_sge, 1);
1127                 wqe_size = sizeof(struct mlx5_wqe_data_seg) * num_scatter;
1128         }
1129         log_wqe_size = log2above(wqe_size);
1130         rq_attr.wq_attr.log_wq_stride = log_wqe_size;
1131         rq_attr.wq_attr.log_wq_sz = rxq_data->elts_n;
1132         /* Calculate and allocate WQ memory space. */
1133         wqe_size = 1 << log_wqe_size; /* round up power of two.*/
1134         wq_size = wqe_n * wqe_size;
1135         buf = rte_calloc_socket(__func__, 1, wq_size, RTE_CACHE_LINE_SIZE,
1136                                 rxq_ctrl->socket);
1137         if (!buf)
1138                 return NULL;
1139         rxq_data->wqes = buf;
1140         rxq_ctrl->wq_umem = mlx5_glue->devx_umem_reg(priv->sh->ctx,
1141                                                      buf, wq_size, 0);
1142         if (!rxq_ctrl->wq_umem) {
1143                 rte_free(buf);
1144                 return NULL;
1145         }
1146         mlx5_devx_wq_attr_fill(priv, rxq_ctrl, &rq_attr.wq_attr);
1147         rq = mlx5_devx_cmd_create_rq(priv->sh->ctx, &rq_attr, rxq_ctrl->socket);
1148         if (!rq)
1149                 rxq_release_rq_resources(rxq_ctrl);
1150         return rq;
1151 }
1152
1153 /**
1154  * Create the Rx queue Verbs/DevX object.
1155  *
1156  * @param dev
1157  *   Pointer to Ethernet device.
1158  * @param idx
1159  *   Queue index in DPDK Rx queue array
1160  * @param type
1161  *   Type of Rx queue object to create.
1162  *
1163  * @return
1164  *   The Verbs/DevX object initialised, NULL otherwise and rte_errno is set.
1165  */
1166 struct mlx5_rxq_obj *
1167 mlx5_rxq_obj_new(struct rte_eth_dev *dev, uint16_t idx,
1168                  enum mlx5_rxq_obj_type type)
1169 {
1170         struct mlx5_priv *priv = dev->data->dev_private;
1171         struct mlx5_rxq_data *rxq_data = (*priv->rxqs)[idx];
1172         struct mlx5_rxq_ctrl *rxq_ctrl =
1173                 container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
1174         struct ibv_wq_attr mod;
1175         unsigned int cqe_n;
1176         unsigned int wqe_n = 1 << rxq_data->elts_n;
1177         struct mlx5_rxq_obj *tmpl = NULL;
1178         struct mlx5dv_cq cq_info;
1179         struct mlx5dv_rwq rwq;
1180         int ret = 0;
1181         struct mlx5dv_obj obj;
1182
1183         assert(rxq_data);
1184         assert(!rxq_ctrl->obj);
1185         priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_RX_QUEUE;
1186         priv->verbs_alloc_ctx.obj = rxq_ctrl;
1187         tmpl = rte_calloc_socket(__func__, 1, sizeof(*tmpl), 0,
1188                                  rxq_ctrl->socket);
1189         if (!tmpl) {
1190                 DRV_LOG(ERR,
1191                         "port %u Rx queue %u cannot allocate verbs resources",
1192                         dev->data->port_id, rxq_data->idx);
1193                 rte_errno = ENOMEM;
1194                 goto error;
1195         }
1196         tmpl->type = type;
1197         tmpl->rxq_ctrl = rxq_ctrl;
1198         if (rxq_ctrl->irq) {
1199                 tmpl->channel = mlx5_glue->create_comp_channel(priv->sh->ctx);
1200                 if (!tmpl->channel) {
1201                         DRV_LOG(ERR, "port %u: comp channel creation failure",
1202                                 dev->data->port_id);
1203                         rte_errno = ENOMEM;
1204                         goto error;
1205                 }
1206         }
1207         if (mlx5_rxq_mprq_enabled(rxq_data))
1208                 cqe_n = wqe_n * (1 << rxq_data->strd_num_n) - 1;
1209         else
1210                 cqe_n = wqe_n  - 1;
1211         tmpl->cq = mlx5_ibv_cq_new(dev, priv, rxq_data, cqe_n, tmpl);
1212         if (!tmpl->cq) {
1213                 DRV_LOG(ERR, "port %u Rx queue %u CQ creation failure",
1214                         dev->data->port_id, idx);
1215                 rte_errno = ENOMEM;
1216                 goto error;
1217         }
1218         obj.cq.in = tmpl->cq;
1219         obj.cq.out = &cq_info;
1220         ret = mlx5_glue->dv_init_obj(&obj, MLX5DV_OBJ_CQ);
1221         if (ret) {
1222                 rte_errno = ret;
1223                 goto error;
1224         }
1225         if (cq_info.cqe_size != RTE_CACHE_LINE_SIZE) {
1226                 DRV_LOG(ERR,
1227                         "port %u wrong MLX5_CQE_SIZE environment variable"
1228                         " value: it should be set to %u",
1229                         dev->data->port_id, RTE_CACHE_LINE_SIZE);
1230                 rte_errno = EINVAL;
1231                 goto error;
1232         }
1233         DRV_LOG(DEBUG, "port %u device_attr.max_qp_wr is %d",
1234                 dev->data->port_id, priv->sh->device_attr.orig_attr.max_qp_wr);
1235         DRV_LOG(DEBUG, "port %u device_attr.max_sge is %d",
1236                 dev->data->port_id, priv->sh->device_attr.orig_attr.max_sge);
1237         /* Allocate door-bell for types created with DevX. */
1238         if (tmpl->type != MLX5_RXQ_OBJ_TYPE_IBV) {
1239                 struct mlx5_devx_dbr_page *dbr_page;
1240                 int64_t dbr_offset;
1241
1242                 dbr_offset = mlx5_get_dbr(dev, &dbr_page);
1243                 if (dbr_offset < 0)
1244                         goto error;
1245                 rxq_ctrl->dbr_offset = dbr_offset;
1246                 rxq_ctrl->dbr_umem_id = dbr_page->umem->umem_id;
1247                 rxq_ctrl->dbr_umem_id_valid = 1;
1248                 rxq_data->rq_db = (uint32_t *)((uintptr_t)dbr_page->dbrs +
1249                                                (uintptr_t)rxq_ctrl->dbr_offset);
1250         }
1251         if (tmpl->type == MLX5_RXQ_OBJ_TYPE_IBV) {
1252                 tmpl->wq = mlx5_ibv_wq_new(dev, priv, rxq_data, idx, wqe_n,
1253                                            tmpl);
1254                 if (!tmpl->wq) {
1255                         DRV_LOG(ERR, "port %u Rx queue %u WQ creation failure",
1256                                 dev->data->port_id, idx);
1257                         rte_errno = ENOMEM;
1258                         goto error;
1259                 }
1260                 /* Change queue state to ready. */
1261                 mod = (struct ibv_wq_attr){
1262                         .attr_mask = IBV_WQ_ATTR_STATE,
1263                         .wq_state = IBV_WQS_RDY,
1264                 };
1265                 ret = mlx5_glue->modify_wq(tmpl->wq, &mod);
1266                 if (ret) {
1267                         DRV_LOG(ERR,
1268                                 "port %u Rx queue %u WQ state to IBV_WQS_RDY"
1269                                 " failed", dev->data->port_id, idx);
1270                         rte_errno = ret;
1271                         goto error;
1272                 }
1273                 obj.rwq.in = tmpl->wq;
1274                 obj.rwq.out = &rwq;
1275                 ret = mlx5_glue->dv_init_obj(&obj, MLX5DV_OBJ_RWQ);
1276                 if (ret) {
1277                         rte_errno = ret;
1278                         goto error;
1279                 }
1280                 rxq_data->wqes = rwq.buf;
1281                 rxq_data->rq_db = rwq.dbrec;
1282         } else if (tmpl->type == MLX5_RXQ_OBJ_TYPE_DEVX_RQ) {
1283                 struct mlx5_devx_modify_rq_attr rq_attr;
1284
1285                 memset(&rq_attr, 0, sizeof(rq_attr));
1286                 tmpl->rq = mlx5_devx_rq_new(dev, idx, cq_info.cqn);
1287                 if (!tmpl->rq) {
1288                         DRV_LOG(ERR, "port %u Rx queue %u RQ creation failure",
1289                                 dev->data->port_id, idx);
1290                         rte_errno = ENOMEM;
1291                         goto error;
1292                 }
1293                 /* Change queue state to ready. */
1294                 rq_attr.rq_state = MLX5_RQC_STATE_RST;
1295                 rq_attr.state = MLX5_RQC_STATE_RDY;
1296                 ret = mlx5_devx_cmd_modify_rq(tmpl->rq, &rq_attr);
1297                 if (ret)
1298                         goto error;
1299         }
1300         /* Fill the rings. */
1301         rxq_data->cqe_n = log2above(cq_info.cqe_cnt);
1302         rxq_data->cq_db = cq_info.dbrec;
1303         rxq_data->cqes = (volatile struct mlx5_cqe (*)[])(uintptr_t)cq_info.buf;
1304         rxq_data->cq_uar = cq_info.cq_uar;
1305         rxq_data->cqn = cq_info.cqn;
1306         rxq_data->cq_arm_sn = 0;
1307         mlx5_rxq_initialize(rxq_data);
1308         rxq_data->cq_ci = 0;
1309         DRV_LOG(DEBUG, "port %u rxq %u updated with %p", dev->data->port_id,
1310                 idx, (void *)&tmpl);
1311         rte_atomic32_inc(&tmpl->refcnt);
1312         LIST_INSERT_HEAD(&priv->rxqsobj, tmpl, next);
1313         priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_NONE;
1314         return tmpl;
1315 error:
1316         if (tmpl) {
1317                 ret = rte_errno; /* Save rte_errno before cleanup. */
1318                 if (tmpl->type == MLX5_RXQ_OBJ_TYPE_IBV && tmpl->wq)
1319                         claim_zero(mlx5_glue->destroy_wq(tmpl->wq));
1320                 else if (tmpl->type == MLX5_RXQ_OBJ_TYPE_DEVX_RQ && tmpl->rq)
1321                         claim_zero(mlx5_devx_cmd_destroy(tmpl->rq));
1322                 if (tmpl->cq)
1323                         claim_zero(mlx5_glue->destroy_cq(tmpl->cq));
1324                 if (tmpl->channel)
1325                         claim_zero(mlx5_glue->destroy_comp_channel
1326                                                         (tmpl->channel));
1327                 rte_free(tmpl);
1328                 rte_errno = ret; /* Restore rte_errno. */
1329         }
1330         if (type == MLX5_RXQ_OBJ_TYPE_DEVX_RQ)
1331                 rxq_release_rq_resources(rxq_ctrl);
1332         priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_NONE;
1333         return NULL;
1334 }
1335
1336 /**
1337  * Verify the Rx queue objects list is empty
1338  *
1339  * @param dev
1340  *   Pointer to Ethernet device.
1341  *
1342  * @return
1343  *   The number of objects not released.
1344  */
1345 int
1346 mlx5_rxq_obj_verify(struct rte_eth_dev *dev)
1347 {
1348         struct mlx5_priv *priv = dev->data->dev_private;
1349         int ret = 0;
1350         struct mlx5_rxq_obj *rxq_obj;
1351
1352         LIST_FOREACH(rxq_obj, &priv->rxqsobj, next) {
1353                 DRV_LOG(DEBUG, "port %u Rx queue %u still referenced",
1354                         dev->data->port_id, rxq_obj->rxq_ctrl->rxq.idx);
1355                 ++ret;
1356         }
1357         return ret;
1358 }
1359
1360 /**
1361  * Callback function to initialize mbufs for Multi-Packet RQ.
1362  */
1363 static inline void
1364 mlx5_mprq_buf_init(struct rte_mempool *mp, void *opaque_arg,
1365                     void *_m, unsigned int i __rte_unused)
1366 {
1367         struct mlx5_mprq_buf *buf = _m;
1368         struct rte_mbuf_ext_shared_info *shinfo;
1369         unsigned int strd_n = (unsigned int)(uintptr_t)opaque_arg;
1370         unsigned int j;
1371
1372         memset(_m, 0, sizeof(*buf));
1373         buf->mp = mp;
1374         rte_atomic16_set(&buf->refcnt, 1);
1375         for (j = 0; j != strd_n; ++j) {
1376                 shinfo = &buf->shinfos[j];
1377                 shinfo->free_cb = mlx5_mprq_buf_free_cb;
1378                 shinfo->fcb_opaque = buf;
1379         }
1380 }
1381
1382 /**
1383  * Free mempool of Multi-Packet RQ.
1384  *
1385  * @param dev
1386  *   Pointer to Ethernet device.
1387  *
1388  * @return
1389  *   0 on success, negative errno value on failure.
1390  */
1391 int
1392 mlx5_mprq_free_mp(struct rte_eth_dev *dev)
1393 {
1394         struct mlx5_priv *priv = dev->data->dev_private;
1395         struct rte_mempool *mp = priv->mprq_mp;
1396         unsigned int i;
1397
1398         if (mp == NULL)
1399                 return 0;
1400         DRV_LOG(DEBUG, "port %u freeing mempool (%s) for Multi-Packet RQ",
1401                 dev->data->port_id, mp->name);
1402         /*
1403          * If a buffer in the pool has been externally attached to a mbuf and it
1404          * is still in use by application, destroying the Rx queue can spoil
1405          * the packet. It is unlikely to happen but if application dynamically
1406          * creates and destroys with holding Rx packets, this can happen.
1407          *
1408          * TODO: It is unavoidable for now because the mempool for Multi-Packet
1409          * RQ isn't provided by application but managed by PMD.
1410          */
1411         if (!rte_mempool_full(mp)) {
1412                 DRV_LOG(ERR,
1413                         "port %u mempool for Multi-Packet RQ is still in use",
1414                         dev->data->port_id);
1415                 rte_errno = EBUSY;
1416                 return -rte_errno;
1417         }
1418         rte_mempool_free(mp);
1419         /* Unset mempool for each Rx queue. */
1420         for (i = 0; i != priv->rxqs_n; ++i) {
1421                 struct mlx5_rxq_data *rxq = (*priv->rxqs)[i];
1422
1423                 if (rxq == NULL)
1424                         continue;
1425                 rxq->mprq_mp = NULL;
1426         }
1427         priv->mprq_mp = NULL;
1428         return 0;
1429 }
1430
1431 /**
1432  * Allocate a mempool for Multi-Packet RQ. All configured Rx queues share the
1433  * mempool. If already allocated, reuse it if there're enough elements.
1434  * Otherwise, resize it.
1435  *
1436  * @param dev
1437  *   Pointer to Ethernet device.
1438  *
1439  * @return
1440  *   0 on success, negative errno value on failure.
1441  */
1442 int
1443 mlx5_mprq_alloc_mp(struct rte_eth_dev *dev)
1444 {
1445         struct mlx5_priv *priv = dev->data->dev_private;
1446         struct rte_mempool *mp = priv->mprq_mp;
1447         char name[RTE_MEMPOOL_NAMESIZE];
1448         unsigned int desc = 0;
1449         unsigned int buf_len;
1450         unsigned int obj_num;
1451         unsigned int obj_size;
1452         unsigned int strd_num_n = 0;
1453         unsigned int strd_sz_n = 0;
1454         unsigned int i;
1455
1456         if (!mlx5_mprq_enabled(dev))
1457                 return 0;
1458         /* Count the total number of descriptors configured. */
1459         for (i = 0; i != priv->rxqs_n; ++i) {
1460                 struct mlx5_rxq_data *rxq = (*priv->rxqs)[i];
1461
1462                 if (rxq == NULL)
1463                         continue;
1464                 desc += 1 << rxq->elts_n;
1465                 /* Get the max number of strides. */
1466                 if (strd_num_n < rxq->strd_num_n)
1467                         strd_num_n = rxq->strd_num_n;
1468                 /* Get the max size of a stride. */
1469                 if (strd_sz_n < rxq->strd_sz_n)
1470                         strd_sz_n = rxq->strd_sz_n;
1471         }
1472         assert(strd_num_n && strd_sz_n);
1473         buf_len = (1 << strd_num_n) * (1 << strd_sz_n);
1474         obj_size = sizeof(struct mlx5_mprq_buf) + buf_len + (1 << strd_num_n) *
1475                 sizeof(struct rte_mbuf_ext_shared_info) + RTE_PKTMBUF_HEADROOM;
1476         /*
1477          * Received packets can be either memcpy'd or externally referenced. In
1478          * case that the packet is attached to an mbuf as an external buffer, as
1479          * it isn't possible to predict how the buffers will be queued by
1480          * application, there's no option to exactly pre-allocate needed buffers
1481          * in advance but to speculatively prepares enough buffers.
1482          *
1483          * In the data path, if this Mempool is depleted, PMD will try to memcpy
1484          * received packets to buffers provided by application (rxq->mp) until
1485          * this Mempool gets available again.
1486          */
1487         desc *= 4;
1488         obj_num = desc + MLX5_MPRQ_MP_CACHE_SZ * priv->rxqs_n;
1489         /*
1490          * rte_mempool_create_empty() has sanity check to refuse large cache
1491          * size compared to the number of elements.
1492          * CACHE_FLUSHTHRESH_MULTIPLIER is defined in a C file, so using a
1493          * constant number 2 instead.
1494          */
1495         obj_num = RTE_MAX(obj_num, MLX5_MPRQ_MP_CACHE_SZ * 2);
1496         /* Check a mempool is already allocated and if it can be resued. */
1497         if (mp != NULL && mp->elt_size >= obj_size && mp->size >= obj_num) {
1498                 DRV_LOG(DEBUG, "port %u mempool %s is being reused",
1499                         dev->data->port_id, mp->name);
1500                 /* Reuse. */
1501                 goto exit;
1502         } else if (mp != NULL) {
1503                 DRV_LOG(DEBUG, "port %u mempool %s should be resized, freeing it",
1504                         dev->data->port_id, mp->name);
1505                 /*
1506                  * If failed to free, which means it may be still in use, no way
1507                  * but to keep using the existing one. On buffer underrun,
1508                  * packets will be memcpy'd instead of external buffer
1509                  * attachment.
1510                  */
1511                 if (mlx5_mprq_free_mp(dev)) {
1512                         if (mp->elt_size >= obj_size)
1513                                 goto exit;
1514                         else
1515                                 return -rte_errno;
1516                 }
1517         }
1518         snprintf(name, sizeof(name), "port-%u-mprq", dev->data->port_id);
1519         mp = rte_mempool_create(name, obj_num, obj_size, MLX5_MPRQ_MP_CACHE_SZ,
1520                                 0, NULL, NULL, mlx5_mprq_buf_init,
1521                                 (void *)(uintptr_t)(1 << strd_num_n),
1522                                 dev->device->numa_node, 0);
1523         if (mp == NULL) {
1524                 DRV_LOG(ERR,
1525                         "port %u failed to allocate a mempool for"
1526                         " Multi-Packet RQ, count=%u, size=%u",
1527                         dev->data->port_id, obj_num, obj_size);
1528                 rte_errno = ENOMEM;
1529                 return -rte_errno;
1530         }
1531         priv->mprq_mp = mp;
1532 exit:
1533         /* Set mempool for each Rx queue. */
1534         for (i = 0; i != priv->rxqs_n; ++i) {
1535                 struct mlx5_rxq_data *rxq = (*priv->rxqs)[i];
1536
1537                 if (rxq == NULL)
1538                         continue;
1539                 rxq->mprq_mp = mp;
1540         }
1541         DRV_LOG(INFO, "port %u Multi-Packet RQ is configured",
1542                 dev->data->port_id);
1543         return 0;
1544 }
1545
1546 #define MLX5_MAX_LRO_SIZE (UINT8_MAX * 256u)
1547 #define MLX5_MAX_TCP_HDR_OFFSET ((unsigned int)(sizeof(struct rte_ether_hdr) + \
1548                                         sizeof(struct rte_vlan_hdr) * 2 + \
1549                                         sizeof(struct rte_ipv6_hdr)))
1550 /**
1551  * Adjust the maximum LRO massage size.
1552  *
1553  * @param dev
1554  *   Pointer to Ethernet device.
1555  * @param max_lro_size
1556  *   The maximum size for LRO packet.
1557  */
1558 static void
1559 mlx5_max_lro_msg_size_adjust(struct rte_eth_dev *dev, uint32_t max_lro_size)
1560 {
1561         struct mlx5_priv *priv = dev->data->dev_private;
1562
1563         if (priv->config.hca_attr.lro_max_msg_sz_mode ==
1564             MLX5_LRO_MAX_MSG_SIZE_START_FROM_L4 && max_lro_size >
1565             MLX5_MAX_TCP_HDR_OFFSET)
1566                 max_lro_size -= MLX5_MAX_TCP_HDR_OFFSET;
1567         max_lro_size = RTE_MIN(max_lro_size, MLX5_MAX_LRO_SIZE);
1568         assert(max_lro_size >= 256u);
1569         max_lro_size /= 256u;
1570         if (priv->max_lro_msg_size)
1571                 priv->max_lro_msg_size =
1572                         RTE_MIN((uint32_t)priv->max_lro_msg_size, max_lro_size);
1573         else
1574                 priv->max_lro_msg_size = max_lro_size;
1575 }
1576
1577 /**
1578  * Create a DPDK Rx queue.
1579  *
1580  * @param dev
1581  *   Pointer to Ethernet device.
1582  * @param idx
1583  *   RX queue index.
1584  * @param desc
1585  *   Number of descriptors to configure in queue.
1586  * @param socket
1587  *   NUMA socket on which memory must be allocated.
1588  *
1589  * @return
1590  *   A DPDK queue object on success, NULL otherwise and rte_errno is set.
1591  */
1592 struct mlx5_rxq_ctrl *
1593 mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
1594              unsigned int socket, const struct rte_eth_rxconf *conf,
1595              struct rte_mempool *mp)
1596 {
1597         struct mlx5_priv *priv = dev->data->dev_private;
1598         struct mlx5_rxq_ctrl *tmpl;
1599         unsigned int mb_len = rte_pktmbuf_data_room_size(mp);
1600         unsigned int mprq_stride_size;
1601         struct mlx5_dev_config *config = &priv->config;
1602         /*
1603          * LRO packet may consume all the stride memory, hence we cannot
1604          * guaranty head-room. A new striding RQ feature may be added in CX6 DX
1605          * to allow head-room and tail-room for the LRO packets.
1606          */
1607         unsigned int strd_headroom_en = mlx5_lro_on(dev) ? 0 : 1;
1608         /*
1609          * Always allocate extra slots, even if eventually
1610          * the vector Rx will not be used.
1611          */
1612         uint16_t desc_n =
1613                 desc + config->rx_vec_en * MLX5_VPMD_DESCS_PER_LOOP;
1614         uint64_t offloads = conf->offloads |
1615                            dev->data->dev_conf.rxmode.offloads;
1616         const int mprq_en = mlx5_check_mprq_support(dev) > 0;
1617         unsigned int max_rx_pkt_len = dev->data->dev_conf.rxmode.max_rx_pkt_len;
1618         unsigned int non_scatter_min_mbuf_size = max_rx_pkt_len +
1619                                                         RTE_PKTMBUF_HEADROOM;
1620
1621         if (non_scatter_min_mbuf_size > mb_len && !(offloads &
1622                                                     DEV_RX_OFFLOAD_SCATTER)) {
1623                 DRV_LOG(ERR, "port %u Rx queue %u: Scatter offload is not"
1624                         " configured and no enough mbuf space(%u) to contain "
1625                         "the maximum RX packet length(%u) with head-room(%u)",
1626                         dev->data->port_id, idx, mb_len, max_rx_pkt_len,
1627                         RTE_PKTMBUF_HEADROOM);
1628                 rte_errno = ENOSPC;
1629                 return NULL;
1630         }
1631         tmpl = rte_calloc_socket("RXQ", 1,
1632                                  sizeof(*tmpl) +
1633                                  desc_n * sizeof(struct rte_mbuf *),
1634                                  0, socket);
1635         if (!tmpl) {
1636                 rte_errno = ENOMEM;
1637                 return NULL;
1638         }
1639         if (mlx5_mr_btree_init(&tmpl->rxq.mr_ctrl.cache_bh,
1640                                MLX5_MR_BTREE_CACHE_N, socket)) {
1641                 /* rte_errno is already set. */
1642                 goto error;
1643         }
1644         tmpl->socket = socket;
1645         if (dev->data->dev_conf.intr_conf.rxq)
1646                 tmpl->irq = 1;
1647         /*
1648          * This Rx queue can be configured as a Multi-Packet RQ if all of the
1649          * following conditions are met:
1650          *  - MPRQ is enabled.
1651          *  - The number of descs is more than the number of strides.
1652          *  - max_rx_pkt_len plus overhead is less than the max size of a
1653          *    stride.
1654          *  Otherwise, enable Rx scatter if necessary.
1655          */
1656         mprq_stride_size = max_rx_pkt_len + RTE_PKTMBUF_HEADROOM *
1657                                 strd_headroom_en;
1658         if (mprq_en &&
1659             desc > (1U << config->mprq.stride_num_n) &&
1660             mprq_stride_size <= (1U << config->mprq.max_stride_size_n)) {
1661                 /* TODO: Rx scatter isn't supported yet. */
1662                 tmpl->rxq.sges_n = 0;
1663                 /* Trim the number of descs needed. */
1664                 desc >>= config->mprq.stride_num_n;
1665                 tmpl->rxq.strd_num_n = config->mprq.stride_num_n;
1666                 tmpl->rxq.strd_sz_n = RTE_MAX(log2above(mprq_stride_size),
1667                                               config->mprq.min_stride_size_n);
1668                 tmpl->rxq.strd_shift_en = MLX5_MPRQ_TWO_BYTE_SHIFT;
1669                 tmpl->rxq.strd_headroom_en = strd_headroom_en;
1670                 tmpl->rxq.mprq_max_memcpy_len = RTE_MIN(mb_len -
1671                             RTE_PKTMBUF_HEADROOM, config->mprq.max_memcpy_len);
1672                 mlx5_max_lro_msg_size_adjust(dev, RTE_MIN(max_rx_pkt_len,
1673                    (1u << tmpl->rxq.strd_num_n) * (1u << tmpl->rxq.strd_sz_n)));
1674                 DRV_LOG(DEBUG,
1675                         "port %u Rx queue %u: Multi-Packet RQ is enabled"
1676                         " strd_num_n = %u, strd_sz_n = %u",
1677                         dev->data->port_id, idx,
1678                         tmpl->rxq.strd_num_n, tmpl->rxq.strd_sz_n);
1679         } else if (max_rx_pkt_len <= (mb_len - RTE_PKTMBUF_HEADROOM)) {
1680                 tmpl->rxq.sges_n = 0;
1681         } else if (offloads & DEV_RX_OFFLOAD_SCATTER) {
1682                 unsigned int size = non_scatter_min_mbuf_size;
1683                 unsigned int sges_n;
1684
1685                 /*
1686                  * Determine the number of SGEs needed for a full packet
1687                  * and round it to the next power of two.
1688                  */
1689                 sges_n = log2above((size / mb_len) + !!(size % mb_len));
1690                 tmpl->rxq.sges_n = sges_n;
1691                 /* Make sure rxq.sges_n did not overflow. */
1692                 size = mb_len * (1 << tmpl->rxq.sges_n);
1693                 size -= RTE_PKTMBUF_HEADROOM;
1694                 if (size < max_rx_pkt_len) {
1695                         DRV_LOG(ERR,
1696                                 "port %u too many SGEs (%u) needed to handle"
1697                                 " requested maximum packet size %u",
1698                                 dev->data->port_id,
1699                                 1 << sges_n,
1700                                 max_rx_pkt_len);
1701                         rte_errno = EOVERFLOW;
1702                         goto error;
1703                 }
1704         }
1705         if (mprq_en && !mlx5_rxq_mprq_enabled(&tmpl->rxq))
1706                 DRV_LOG(WARNING,
1707                         "port %u MPRQ is requested but cannot be enabled"
1708                         " (requested: desc = %u, stride_sz = %u,"
1709                         " supported: min_stride_num = %u, max_stride_sz = %u).",
1710                         dev->data->port_id, desc, mprq_stride_size,
1711                         (1 << config->mprq.stride_num_n),
1712                         (1 << config->mprq.max_stride_size_n));
1713         DRV_LOG(DEBUG, "port %u maximum number of segments per packet: %u",
1714                 dev->data->port_id, 1 << tmpl->rxq.sges_n);
1715         if (desc % (1 << tmpl->rxq.sges_n)) {
1716                 DRV_LOG(ERR,
1717                         "port %u number of Rx queue descriptors (%u) is not a"
1718                         " multiple of SGEs per packet (%u)",
1719                         dev->data->port_id,
1720                         desc,
1721                         1 << tmpl->rxq.sges_n);
1722                 rte_errno = EINVAL;
1723                 goto error;
1724         }
1725         /* Toggle RX checksum offload if hardware supports it. */
1726         tmpl->rxq.csum = !!(offloads & DEV_RX_OFFLOAD_CHECKSUM);
1727         tmpl->rxq.hw_timestamp = !!(offloads & DEV_RX_OFFLOAD_TIMESTAMP);
1728         /* Configure VLAN stripping. */
1729         tmpl->rxq.vlan_strip = !!(offloads & DEV_RX_OFFLOAD_VLAN_STRIP);
1730         /* By default, FCS (CRC) is stripped by hardware. */
1731         tmpl->rxq.crc_present = 0;
1732         if (offloads & DEV_RX_OFFLOAD_KEEP_CRC) {
1733                 if (config->hw_fcs_strip) {
1734                         /*
1735                          * RQs used for LRO-enabled TIRs should not be
1736                          * configured to scatter the FCS.
1737                          */
1738                         if (mlx5_lro_on(dev))
1739                                 DRV_LOG(WARNING,
1740                                         "port %u CRC stripping has been "
1741                                         "disabled but will still be performed "
1742                                         "by hardware, because LRO is enabled",
1743                                         dev->data->port_id);
1744                         else
1745                                 tmpl->rxq.crc_present = 1;
1746                 } else {
1747                         DRV_LOG(WARNING,
1748                                 "port %u CRC stripping has been disabled but will"
1749                                 " still be performed by hardware, make sure MLNX_OFED"
1750                                 " and firmware are up to date",
1751                                 dev->data->port_id);
1752                 }
1753         }
1754         DRV_LOG(DEBUG,
1755                 "port %u CRC stripping is %s, %u bytes will be subtracted from"
1756                 " incoming frames to hide it",
1757                 dev->data->port_id,
1758                 tmpl->rxq.crc_present ? "disabled" : "enabled",
1759                 tmpl->rxq.crc_present << 2);
1760         /* Save port ID. */
1761         tmpl->rxq.rss_hash = !!priv->rss_conf.rss_hf &&
1762                 (!!(dev->data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_RSS));
1763         tmpl->rxq.port_id = dev->data->port_id;
1764         tmpl->priv = priv;
1765         tmpl->rxq.mp = mp;
1766         tmpl->rxq.elts_n = log2above(desc);
1767         tmpl->rxq.rq_repl_thresh =
1768                 MLX5_VPMD_RXQ_RPLNSH_THRESH(1 << tmpl->rxq.elts_n);
1769         tmpl->rxq.elts =
1770                 (struct rte_mbuf *(*)[1 << tmpl->rxq.elts_n])(tmpl + 1);
1771 #ifndef RTE_ARCH_64
1772         tmpl->rxq.uar_lock_cq = &priv->uar_lock_cq;
1773 #endif
1774         tmpl->rxq.idx = idx;
1775         rte_atomic32_inc(&tmpl->refcnt);
1776         LIST_INSERT_HEAD(&priv->rxqsctrl, tmpl, next);
1777         return tmpl;
1778 error:
1779         rte_free(tmpl);
1780         return NULL;
1781 }
1782
1783 /**
1784  * Get a Rx queue.
1785  *
1786  * @param dev
1787  *   Pointer to Ethernet device.
1788  * @param idx
1789  *   RX queue index.
1790  *
1791  * @return
1792  *   A pointer to the queue if it exists, NULL otherwise.
1793  */
1794 struct mlx5_rxq_ctrl *
1795 mlx5_rxq_get(struct rte_eth_dev *dev, uint16_t idx)
1796 {
1797         struct mlx5_priv *priv = dev->data->dev_private;
1798         struct mlx5_rxq_ctrl *rxq_ctrl = NULL;
1799
1800         if ((*priv->rxqs)[idx]) {
1801                 rxq_ctrl = container_of((*priv->rxqs)[idx],
1802                                         struct mlx5_rxq_ctrl,
1803                                         rxq);
1804                 mlx5_rxq_obj_get(dev, idx);
1805                 rte_atomic32_inc(&rxq_ctrl->refcnt);
1806         }
1807         return rxq_ctrl;
1808 }
1809
1810 /**
1811  * Release a Rx queue.
1812  *
1813  * @param dev
1814  *   Pointer to Ethernet device.
1815  * @param idx
1816  *   RX queue index.
1817  *
1818  * @return
1819  *   1 while a reference on it exists, 0 when freed.
1820  */
1821 int
1822 mlx5_rxq_release(struct rte_eth_dev *dev, uint16_t idx)
1823 {
1824         struct mlx5_priv *priv = dev->data->dev_private;
1825         struct mlx5_rxq_ctrl *rxq_ctrl;
1826
1827         if (!(*priv->rxqs)[idx])
1828                 return 0;
1829         rxq_ctrl = container_of((*priv->rxqs)[idx], struct mlx5_rxq_ctrl, rxq);
1830         assert(rxq_ctrl->priv);
1831         if (rxq_ctrl->obj && !mlx5_rxq_obj_release(rxq_ctrl->obj))
1832                 rxq_ctrl->obj = NULL;
1833         if (rte_atomic32_dec_and_test(&rxq_ctrl->refcnt)) {
1834                 if (rxq_ctrl->dbr_umem_id_valid)
1835                         claim_zero(mlx5_release_dbr(dev, rxq_ctrl->dbr_umem_id,
1836                                                     rxq_ctrl->dbr_offset));
1837                 mlx5_mr_btree_free(&rxq_ctrl->rxq.mr_ctrl.cache_bh);
1838                 LIST_REMOVE(rxq_ctrl, next);
1839                 rte_free(rxq_ctrl);
1840                 (*priv->rxqs)[idx] = NULL;
1841                 return 0;
1842         }
1843         return 1;
1844 }
1845
1846 /**
1847  * Verify the Rx Queue list is empty
1848  *
1849  * @param dev
1850  *   Pointer to Ethernet device.
1851  *
1852  * @return
1853  *   The number of object not released.
1854  */
1855 int
1856 mlx5_rxq_verify(struct rte_eth_dev *dev)
1857 {
1858         struct mlx5_priv *priv = dev->data->dev_private;
1859         struct mlx5_rxq_ctrl *rxq_ctrl;
1860         int ret = 0;
1861
1862         LIST_FOREACH(rxq_ctrl, &priv->rxqsctrl, next) {
1863                 DRV_LOG(DEBUG, "port %u Rx Queue %u still referenced",
1864                         dev->data->port_id, rxq_ctrl->rxq.idx);
1865                 ++ret;
1866         }
1867         return ret;
1868 }
1869
1870 /**
1871  * Create an indirection table.
1872  *
1873  * @param dev
1874  *   Pointer to Ethernet device.
1875  * @param queues
1876  *   Queues entering in the indirection table.
1877  * @param queues_n
1878  *   Number of queues in the array.
1879  *
1880  * @return
1881  *   The Verbs/DevX object initialised, NULL otherwise and rte_errno is set.
1882  */
1883 static struct mlx5_ind_table_obj *
1884 mlx5_ind_table_obj_new(struct rte_eth_dev *dev, const uint16_t *queues,
1885                        uint32_t queues_n, enum mlx5_ind_tbl_type type)
1886 {
1887         struct mlx5_priv *priv = dev->data->dev_private;
1888         struct mlx5_ind_table_obj *ind_tbl;
1889         unsigned int i = 0, j = 0, k = 0;
1890
1891         ind_tbl = rte_calloc(__func__, 1, sizeof(*ind_tbl) +
1892                              queues_n * sizeof(uint16_t), 0);
1893         if (!ind_tbl) {
1894                 rte_errno = ENOMEM;
1895                 return NULL;
1896         }
1897         ind_tbl->type = type;
1898         if (ind_tbl->type == MLX5_IND_TBL_TYPE_IBV) {
1899                 const unsigned int wq_n = rte_is_power_of_2(queues_n) ?
1900                         log2above(queues_n) :
1901                         log2above(priv->config.ind_table_max_size);
1902                 struct ibv_wq *wq[1 << wq_n];
1903
1904                 for (i = 0; i != queues_n; ++i) {
1905                         struct mlx5_rxq_ctrl *rxq = mlx5_rxq_get(dev,
1906                                                                  queues[i]);
1907                         if (!rxq)
1908                                 goto error;
1909                         wq[i] = rxq->obj->wq;
1910                         ind_tbl->queues[i] = queues[i];
1911                 }
1912                 ind_tbl->queues_n = queues_n;
1913                 /* Finalise indirection table. */
1914                 k = i; /* Retain value of i for use in error case. */
1915                 for (j = 0; k != (unsigned int)(1 << wq_n); ++k, ++j)
1916                         wq[k] = wq[j];
1917                 ind_tbl->ind_table = mlx5_glue->create_rwq_ind_table
1918                         (priv->sh->ctx,
1919                          &(struct ibv_rwq_ind_table_init_attr){
1920                                 .log_ind_tbl_size = wq_n,
1921                                 .ind_tbl = wq,
1922                                 .comp_mask = 0,
1923                         });
1924                 if (!ind_tbl->ind_table) {
1925                         rte_errno = errno;
1926                         goto error;
1927                 }
1928         } else { /* ind_tbl->type == MLX5_IND_TBL_TYPE_DEVX */
1929                 struct mlx5_devx_rqt_attr *rqt_attr = NULL;
1930
1931                 rqt_attr = rte_calloc(__func__, 1, sizeof(*rqt_attr) +
1932                                       queues_n * sizeof(uint16_t), 0);
1933                 if (!rqt_attr) {
1934                         DRV_LOG(ERR, "port %u cannot allocate RQT resources",
1935                                 dev->data->port_id);
1936                         rte_errno = ENOMEM;
1937                         goto error;
1938                 }
1939                 rqt_attr->rqt_max_size = priv->config.ind_table_max_size;
1940                 rqt_attr->rqt_actual_size = queues_n;
1941                 for (i = 0; i != queues_n; ++i) {
1942                         struct mlx5_rxq_ctrl *rxq = mlx5_rxq_get(dev,
1943                                                                  queues[i]);
1944                         if (!rxq)
1945                                 goto error;
1946                         rqt_attr->rq_list[i] = rxq->obj->rq->id;
1947                         ind_tbl->queues[i] = queues[i];
1948                 }
1949                 ind_tbl->rqt = mlx5_devx_cmd_create_rqt(priv->sh->ctx,
1950                                                         rqt_attr);
1951                 rte_free(rqt_attr);
1952                 if (!ind_tbl->rqt) {
1953                         DRV_LOG(ERR, "port %u cannot create DevX RQT",
1954                                 dev->data->port_id);
1955                         rte_errno = errno;
1956                         goto error;
1957                 }
1958                 ind_tbl->queues_n = queues_n;
1959         }
1960         rte_atomic32_inc(&ind_tbl->refcnt);
1961         LIST_INSERT_HEAD(&priv->ind_tbls, ind_tbl, next);
1962         return ind_tbl;
1963 error:
1964         for (j = 0; j < i; j++)
1965                 mlx5_rxq_release(dev, ind_tbl->queues[j]);
1966         rte_free(ind_tbl);
1967         DEBUG("port %u cannot create indirection table", dev->data->port_id);
1968         return NULL;
1969 }
1970
1971 /**
1972  * Get an indirection table.
1973  *
1974  * @param dev
1975  *   Pointer to Ethernet device.
1976  * @param queues
1977  *   Queues entering in the indirection table.
1978  * @param queues_n
1979  *   Number of queues in the array.
1980  *
1981  * @return
1982  *   An indirection table if found.
1983  */
1984 static struct mlx5_ind_table_obj *
1985 mlx5_ind_table_obj_get(struct rte_eth_dev *dev, const uint16_t *queues,
1986                        uint32_t queues_n)
1987 {
1988         struct mlx5_priv *priv = dev->data->dev_private;
1989         struct mlx5_ind_table_obj *ind_tbl;
1990
1991         LIST_FOREACH(ind_tbl, &priv->ind_tbls, next) {
1992                 if ((ind_tbl->queues_n == queues_n) &&
1993                     (memcmp(ind_tbl->queues, queues,
1994                             ind_tbl->queues_n * sizeof(ind_tbl->queues[0]))
1995                      == 0))
1996                         break;
1997         }
1998         if (ind_tbl) {
1999                 unsigned int i;
2000
2001                 rte_atomic32_inc(&ind_tbl->refcnt);
2002                 for (i = 0; i != ind_tbl->queues_n; ++i)
2003                         mlx5_rxq_get(dev, ind_tbl->queues[i]);
2004         }
2005         return ind_tbl;
2006 }
2007
2008 /**
2009  * Release an indirection table.
2010  *
2011  * @param dev
2012  *   Pointer to Ethernet device.
2013  * @param ind_table
2014  *   Indirection table to release.
2015  *
2016  * @return
2017  *   1 while a reference on it exists, 0 when freed.
2018  */
2019 static int
2020 mlx5_ind_table_obj_release(struct rte_eth_dev *dev,
2021                            struct mlx5_ind_table_obj *ind_tbl)
2022 {
2023         unsigned int i;
2024
2025         if (rte_atomic32_dec_and_test(&ind_tbl->refcnt)) {
2026                 if (ind_tbl->type == MLX5_IND_TBL_TYPE_IBV)
2027                         claim_zero(mlx5_glue->destroy_rwq_ind_table
2028                                                         (ind_tbl->ind_table));
2029                 else if (ind_tbl->type == MLX5_IND_TBL_TYPE_DEVX)
2030                         claim_zero(mlx5_devx_cmd_destroy(ind_tbl->rqt));
2031         }
2032         for (i = 0; i != ind_tbl->queues_n; ++i)
2033                 claim_nonzero(mlx5_rxq_release(dev, ind_tbl->queues[i]));
2034         if (!rte_atomic32_read(&ind_tbl->refcnt)) {
2035                 LIST_REMOVE(ind_tbl, next);
2036                 rte_free(ind_tbl);
2037                 return 0;
2038         }
2039         return 1;
2040 }
2041
2042 /**
2043  * Verify the Rx Queue list is empty
2044  *
2045  * @param dev
2046  *   Pointer to Ethernet device.
2047  *
2048  * @return
2049  *   The number of object not released.
2050  */
2051 int
2052 mlx5_ind_table_obj_verify(struct rte_eth_dev *dev)
2053 {
2054         struct mlx5_priv *priv = dev->data->dev_private;
2055         struct mlx5_ind_table_obj *ind_tbl;
2056         int ret = 0;
2057
2058         LIST_FOREACH(ind_tbl, &priv->ind_tbls, next) {
2059                 DRV_LOG(DEBUG,
2060                         "port %u indirection table obj %p still referenced",
2061                         dev->data->port_id, (void *)ind_tbl);
2062                 ++ret;
2063         }
2064         return ret;
2065 }
2066
2067 /**
2068  * Create an Rx Hash queue.
2069  *
2070  * @param dev
2071  *   Pointer to Ethernet device.
2072  * @param rss_key
2073  *   RSS key for the Rx hash queue.
2074  * @param rss_key_len
2075  *   RSS key length.
2076  * @param hash_fields
2077  *   Verbs protocol hash field to make the RSS on.
2078  * @param queues
2079  *   Queues entering in hash queue. In case of empty hash_fields only the
2080  *   first queue index will be taken for the indirection table.
2081  * @param queues_n
2082  *   Number of queues.
2083  * @param tunnel
2084  *   Tunnel type.
2085  * @param lro
2086  *   Flow rule is relevant for LRO, i.e. contains IPv4/IPv6 and TCP.
2087  *
2088  * @return
2089  *   The Verbs/DevX object initialised, NULL otherwise and rte_errno is set.
2090  */
2091 struct mlx5_hrxq *
2092 mlx5_hrxq_new(struct rte_eth_dev *dev,
2093               const uint8_t *rss_key, uint32_t rss_key_len,
2094               uint64_t hash_fields,
2095               const uint16_t *queues, uint32_t queues_n,
2096               int tunnel __rte_unused, int lro)
2097 {
2098         struct mlx5_priv *priv = dev->data->dev_private;
2099         struct mlx5_hrxq *hrxq;
2100         struct ibv_qp *qp = NULL;
2101         struct mlx5_ind_table_obj *ind_tbl;
2102         int err;
2103         struct mlx5_devx_obj *tir = NULL;
2104
2105         queues_n = hash_fields ? queues_n : 1;
2106         ind_tbl = mlx5_ind_table_obj_get(dev, queues, queues_n);
2107         if (!ind_tbl) {
2108                 struct mlx5_rxq_data *rxq_data = (*priv->rxqs)[queues[0]];
2109                 struct mlx5_rxq_ctrl *rxq_ctrl =
2110                         container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
2111                 enum mlx5_ind_tbl_type type;
2112
2113                 type = rxq_ctrl->obj->type == MLX5_RXQ_OBJ_TYPE_IBV ?
2114                                 MLX5_IND_TBL_TYPE_IBV : MLX5_IND_TBL_TYPE_DEVX;
2115                 ind_tbl = mlx5_ind_table_obj_new(dev, queues, queues_n, type);
2116         }
2117         if (!ind_tbl) {
2118                 rte_errno = ENOMEM;
2119                 return NULL;
2120         }
2121         if (ind_tbl->type == MLX5_IND_TBL_TYPE_IBV) {
2122 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
2123                 struct mlx5dv_qp_init_attr qp_init_attr;
2124
2125                 memset(&qp_init_attr, 0, sizeof(qp_init_attr));
2126                 if (tunnel) {
2127                         qp_init_attr.comp_mask =
2128                                 MLX5DV_QP_INIT_ATTR_MASK_QP_CREATE_FLAGS;
2129                         qp_init_attr.create_flags =
2130                                 MLX5DV_QP_CREATE_TUNNEL_OFFLOADS;
2131                 }
2132 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
2133                 if (dev->data->dev_conf.lpbk_mode) {
2134                         /*
2135                          * Allow packet sent from NIC loop back
2136                          * w/o source MAC check.
2137                          */
2138                         qp_init_attr.comp_mask |=
2139                                 MLX5DV_QP_INIT_ATTR_MASK_QP_CREATE_FLAGS;
2140                         qp_init_attr.create_flags |=
2141                                 MLX5DV_QP_CREATE_TIR_ALLOW_SELF_LOOPBACK_UC;
2142                 }
2143 #endif
2144                 qp = mlx5_glue->dv_create_qp
2145                         (priv->sh->ctx,
2146                          &(struct ibv_qp_init_attr_ex){
2147                                 .qp_type = IBV_QPT_RAW_PACKET,
2148                                 .comp_mask =
2149                                         IBV_QP_INIT_ATTR_PD |
2150                                         IBV_QP_INIT_ATTR_IND_TABLE |
2151                                         IBV_QP_INIT_ATTR_RX_HASH,
2152                                 .rx_hash_conf = (struct ibv_rx_hash_conf){
2153                                         .rx_hash_function =
2154                                                 IBV_RX_HASH_FUNC_TOEPLITZ,
2155                                         .rx_hash_key_len = rss_key_len,
2156                                         .rx_hash_key =
2157                                                 (void *)(uintptr_t)rss_key,
2158                                         .rx_hash_fields_mask = hash_fields,
2159                                 },
2160                                 .rwq_ind_tbl = ind_tbl->ind_table,
2161                                 .pd = priv->sh->pd,
2162                           },
2163                           &qp_init_attr);
2164 #else
2165                 qp = mlx5_glue->create_qp_ex
2166                         (priv->sh->ctx,
2167                          &(struct ibv_qp_init_attr_ex){
2168                                 .qp_type = IBV_QPT_RAW_PACKET,
2169                                 .comp_mask =
2170                                         IBV_QP_INIT_ATTR_PD |
2171                                         IBV_QP_INIT_ATTR_IND_TABLE |
2172                                         IBV_QP_INIT_ATTR_RX_HASH,
2173                                 .rx_hash_conf = (struct ibv_rx_hash_conf){
2174                                         .rx_hash_function =
2175                                                 IBV_RX_HASH_FUNC_TOEPLITZ,
2176                                         .rx_hash_key_len = rss_key_len,
2177                                         .rx_hash_key =
2178                                                 (void *)(uintptr_t)rss_key,
2179                                         .rx_hash_fields_mask = hash_fields,
2180                                 },
2181                                 .rwq_ind_tbl = ind_tbl->ind_table,
2182                                 .pd = priv->sh->pd,
2183                          });
2184 #endif
2185                 if (!qp) {
2186                         rte_errno = errno;
2187                         goto error;
2188                 }
2189         } else { /* ind_tbl->type == MLX5_IND_TBL_TYPE_DEVX */
2190                 struct mlx5_devx_tir_attr tir_attr;
2191
2192                 memset(&tir_attr, 0, sizeof(tir_attr));
2193                 tir_attr.disp_type = MLX5_TIRC_DISP_TYPE_INDIRECT;
2194                 tir_attr.rx_hash_fn = MLX5_RX_HASH_FN_TOEPLITZ;
2195                 memcpy(&tir_attr.rx_hash_field_selector_outer, &hash_fields,
2196                        sizeof(uint64_t));
2197                 tir_attr.transport_domain = priv->sh->tdn;
2198                 memcpy(tir_attr.rx_hash_toeplitz_key, rss_key, rss_key_len);
2199                 tir_attr.indirect_table = ind_tbl->rqt->id;
2200                 if (dev->data->dev_conf.lpbk_mode)
2201                         tir_attr.self_lb_block =
2202                                         MLX5_TIRC_SELF_LB_BLOCK_BLOCK_UNICAST;
2203                 if (lro) {
2204                         tir_attr.lro_timeout_period_usecs =
2205                                         priv->config.lro.timeout;
2206                         tir_attr.lro_max_msg_sz = priv->max_lro_msg_size;
2207                         tir_attr.lro_enable_mask = lro;
2208                 }
2209                 tir = mlx5_devx_cmd_create_tir(priv->sh->ctx, &tir_attr);
2210                 if (!tir) {
2211                         DRV_LOG(ERR, "port %u cannot create DevX TIR",
2212                                 dev->data->port_id);
2213                         rte_errno = errno;
2214                         goto error;
2215                 }
2216         }
2217         hrxq = rte_calloc(__func__, 1, sizeof(*hrxq) + rss_key_len, 0);
2218         if (!hrxq)
2219                 goto error;
2220         hrxq->ind_table = ind_tbl;
2221         if (ind_tbl->type == MLX5_IND_TBL_TYPE_IBV) {
2222                 hrxq->qp = qp;
2223 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
2224                 hrxq->action =
2225                         mlx5_glue->dv_create_flow_action_dest_ibv_qp(hrxq->qp);
2226                 if (!hrxq->action) {
2227                         rte_errno = errno;
2228                         goto error;
2229                 }
2230 #endif
2231         } else { /* ind_tbl->type == MLX5_IND_TBL_TYPE_DEVX */
2232                 hrxq->tir = tir;
2233 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
2234                 hrxq->action = mlx5_glue->dv_create_flow_action_dest_devx_tir
2235                                                         (hrxq->tir->obj);
2236                 if (!hrxq->action) {
2237                         rte_errno = errno;
2238                         goto error;
2239                 }
2240 #endif
2241         }
2242         hrxq->rss_key_len = rss_key_len;
2243         hrxq->hash_fields = hash_fields;
2244         memcpy(hrxq->rss_key, rss_key, rss_key_len);
2245         rte_atomic32_inc(&hrxq->refcnt);
2246         LIST_INSERT_HEAD(&priv->hrxqs, hrxq, next);
2247         return hrxq;
2248 error:
2249         err = rte_errno; /* Save rte_errno before cleanup. */
2250         mlx5_ind_table_obj_release(dev, ind_tbl);
2251         if (qp)
2252                 claim_zero(mlx5_glue->destroy_qp(qp));
2253         else if (tir)
2254                 claim_zero(mlx5_devx_cmd_destroy(tir));
2255         rte_errno = err; /* Restore rte_errno. */
2256         return NULL;
2257 }
2258
2259 /**
2260  * Get an Rx Hash queue.
2261  *
2262  * @param dev
2263  *   Pointer to Ethernet device.
2264  * @param rss_conf
2265  *   RSS configuration for the Rx hash queue.
2266  * @param queues
2267  *   Queues entering in hash queue. In case of empty hash_fields only the
2268  *   first queue index will be taken for the indirection table.
2269  * @param queues_n
2270  *   Number of queues.
2271  *
2272  * @return
2273  *   An hash Rx queue on success.
2274  */
2275 struct mlx5_hrxq *
2276 mlx5_hrxq_get(struct rte_eth_dev *dev,
2277               const uint8_t *rss_key, uint32_t rss_key_len,
2278               uint64_t hash_fields,
2279               const uint16_t *queues, uint32_t queues_n)
2280 {
2281         struct mlx5_priv *priv = dev->data->dev_private;
2282         struct mlx5_hrxq *hrxq;
2283
2284         queues_n = hash_fields ? queues_n : 1;
2285         LIST_FOREACH(hrxq, &priv->hrxqs, next) {
2286                 struct mlx5_ind_table_obj *ind_tbl;
2287
2288                 if (hrxq->rss_key_len != rss_key_len)
2289                         continue;
2290                 if (memcmp(hrxq->rss_key, rss_key, rss_key_len))
2291                         continue;
2292                 if (hrxq->hash_fields != hash_fields)
2293                         continue;
2294                 ind_tbl = mlx5_ind_table_obj_get(dev, queues, queues_n);
2295                 if (!ind_tbl)
2296                         continue;
2297                 if (ind_tbl != hrxq->ind_table) {
2298                         mlx5_ind_table_obj_release(dev, ind_tbl);
2299                         continue;
2300                 }
2301                 rte_atomic32_inc(&hrxq->refcnt);
2302                 return hrxq;
2303         }
2304         return NULL;
2305 }
2306
2307 /**
2308  * Release the hash Rx queue.
2309  *
2310  * @param dev
2311  *   Pointer to Ethernet device.
2312  * @param hrxq
2313  *   Pointer to Hash Rx queue to release.
2314  *
2315  * @return
2316  *   1 while a reference on it exists, 0 when freed.
2317  */
2318 int
2319 mlx5_hrxq_release(struct rte_eth_dev *dev, struct mlx5_hrxq *hrxq)
2320 {
2321         if (rte_atomic32_dec_and_test(&hrxq->refcnt)) {
2322 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
2323                 mlx5_glue->destroy_flow_action(hrxq->action);
2324 #endif
2325                 if (hrxq->ind_table->type == MLX5_IND_TBL_TYPE_IBV)
2326                         claim_zero(mlx5_glue->destroy_qp(hrxq->qp));
2327                 else /* hrxq->ind_table->type == MLX5_IND_TBL_TYPE_DEVX */
2328                         claim_zero(mlx5_devx_cmd_destroy(hrxq->tir));
2329                 mlx5_ind_table_obj_release(dev, hrxq->ind_table);
2330                 LIST_REMOVE(hrxq, next);
2331                 rte_free(hrxq);
2332                 return 0;
2333         }
2334         claim_nonzero(mlx5_ind_table_obj_release(dev, hrxq->ind_table));
2335         return 1;
2336 }
2337
2338 /**
2339  * Verify the Rx Queue list is empty
2340  *
2341  * @param dev
2342  *   Pointer to Ethernet device.
2343  *
2344  * @return
2345  *   The number of object not released.
2346  */
2347 int
2348 mlx5_hrxq_verify(struct rte_eth_dev *dev)
2349 {
2350         struct mlx5_priv *priv = dev->data->dev_private;
2351         struct mlx5_hrxq *hrxq;
2352         int ret = 0;
2353
2354         LIST_FOREACH(hrxq, &priv->hrxqs, next) {
2355                 DRV_LOG(DEBUG,
2356                         "port %u hash Rx queue %p still referenced",
2357                         dev->data->port_id, (void *)hrxq);
2358                 ++ret;
2359         }
2360         return ret;
2361 }
2362
2363 /**
2364  * Create a drop Rx queue Verbs/DevX object.
2365  *
2366  * @param dev
2367  *   Pointer to Ethernet device.
2368  *
2369  * @return
2370  *   The Verbs/DevX object initialised, NULL otherwise and rte_errno is set.
2371  */
2372 static struct mlx5_rxq_obj *
2373 mlx5_rxq_obj_drop_new(struct rte_eth_dev *dev)
2374 {
2375         struct mlx5_priv *priv = dev->data->dev_private;
2376         struct ibv_context *ctx = priv->sh->ctx;
2377         struct ibv_cq *cq;
2378         struct ibv_wq *wq = NULL;
2379         struct mlx5_rxq_obj *rxq;
2380
2381         if (priv->drop_queue.rxq)
2382                 return priv->drop_queue.rxq;
2383         cq = mlx5_glue->create_cq(ctx, 1, NULL, NULL, 0);
2384         if (!cq) {
2385                 DEBUG("port %u cannot allocate CQ for drop queue",
2386                       dev->data->port_id);
2387                 rte_errno = errno;
2388                 goto error;
2389         }
2390         wq = mlx5_glue->create_wq(ctx,
2391                  &(struct ibv_wq_init_attr){
2392                         .wq_type = IBV_WQT_RQ,
2393                         .max_wr = 1,
2394                         .max_sge = 1,
2395                         .pd = priv->sh->pd,
2396                         .cq = cq,
2397                  });
2398         if (!wq) {
2399                 DEBUG("port %u cannot allocate WQ for drop queue",
2400                       dev->data->port_id);
2401                 rte_errno = errno;
2402                 goto error;
2403         }
2404         rxq = rte_calloc(__func__, 1, sizeof(*rxq), 0);
2405         if (!rxq) {
2406                 DEBUG("port %u cannot allocate drop Rx queue memory",
2407                       dev->data->port_id);
2408                 rte_errno = ENOMEM;
2409                 goto error;
2410         }
2411         rxq->cq = cq;
2412         rxq->wq = wq;
2413         priv->drop_queue.rxq = rxq;
2414         return rxq;
2415 error:
2416         if (wq)
2417                 claim_zero(mlx5_glue->destroy_wq(wq));
2418         if (cq)
2419                 claim_zero(mlx5_glue->destroy_cq(cq));
2420         return NULL;
2421 }
2422
2423 /**
2424  * Release a drop Rx queue Verbs/DevX object.
2425  *
2426  * @param dev
2427  *   Pointer to Ethernet device.
2428  *
2429  * @return
2430  *   The Verbs/DevX object initialised, NULL otherwise and rte_errno is set.
2431  */
2432 static void
2433 mlx5_rxq_obj_drop_release(struct rte_eth_dev *dev)
2434 {
2435         struct mlx5_priv *priv = dev->data->dev_private;
2436         struct mlx5_rxq_obj *rxq = priv->drop_queue.rxq;
2437
2438         if (rxq->wq)
2439                 claim_zero(mlx5_glue->destroy_wq(rxq->wq));
2440         if (rxq->cq)
2441                 claim_zero(mlx5_glue->destroy_cq(rxq->cq));
2442         rte_free(rxq);
2443         priv->drop_queue.rxq = NULL;
2444 }
2445
2446 /**
2447  * Create a drop indirection table.
2448  *
2449  * @param dev
2450  *   Pointer to Ethernet device.
2451  *
2452  * @return
2453  *   The Verbs/DevX object initialised, NULL otherwise and rte_errno is set.
2454  */
2455 static struct mlx5_ind_table_obj *
2456 mlx5_ind_table_obj_drop_new(struct rte_eth_dev *dev)
2457 {
2458         struct mlx5_priv *priv = dev->data->dev_private;
2459         struct mlx5_ind_table_obj *ind_tbl;
2460         struct mlx5_rxq_obj *rxq;
2461         struct mlx5_ind_table_obj tmpl;
2462
2463         rxq = mlx5_rxq_obj_drop_new(dev);
2464         if (!rxq)
2465                 return NULL;
2466         tmpl.ind_table = mlx5_glue->create_rwq_ind_table
2467                 (priv->sh->ctx,
2468                  &(struct ibv_rwq_ind_table_init_attr){
2469                         .log_ind_tbl_size = 0,
2470                         .ind_tbl = &rxq->wq,
2471                         .comp_mask = 0,
2472                  });
2473         if (!tmpl.ind_table) {
2474                 DEBUG("port %u cannot allocate indirection table for drop"
2475                       " queue",
2476                       dev->data->port_id);
2477                 rte_errno = errno;
2478                 goto error;
2479         }
2480         ind_tbl = rte_calloc(__func__, 1, sizeof(*ind_tbl), 0);
2481         if (!ind_tbl) {
2482                 rte_errno = ENOMEM;
2483                 goto error;
2484         }
2485         ind_tbl->ind_table = tmpl.ind_table;
2486         return ind_tbl;
2487 error:
2488         mlx5_rxq_obj_drop_release(dev);
2489         return NULL;
2490 }
2491
2492 /**
2493  * Release a drop indirection table.
2494  *
2495  * @param dev
2496  *   Pointer to Ethernet device.
2497  */
2498 static void
2499 mlx5_ind_table_obj_drop_release(struct rte_eth_dev *dev)
2500 {
2501         struct mlx5_priv *priv = dev->data->dev_private;
2502         struct mlx5_ind_table_obj *ind_tbl = priv->drop_queue.hrxq->ind_table;
2503
2504         claim_zero(mlx5_glue->destroy_rwq_ind_table(ind_tbl->ind_table));
2505         mlx5_rxq_obj_drop_release(dev);
2506         rte_free(ind_tbl);
2507         priv->drop_queue.hrxq->ind_table = NULL;
2508 }
2509
2510 /**
2511  * Create a drop Rx Hash queue.
2512  *
2513  * @param dev
2514  *   Pointer to Ethernet device.
2515  *
2516  * @return
2517  *   The Verbs/DevX object initialised, NULL otherwise and rte_errno is set.
2518  */
2519 struct mlx5_hrxq *
2520 mlx5_hrxq_drop_new(struct rte_eth_dev *dev)
2521 {
2522         struct mlx5_priv *priv = dev->data->dev_private;
2523         struct mlx5_ind_table_obj *ind_tbl;
2524         struct ibv_qp *qp;
2525         struct mlx5_hrxq *hrxq;
2526
2527         if (priv->drop_queue.hrxq) {
2528                 rte_atomic32_inc(&priv->drop_queue.hrxq->refcnt);
2529                 return priv->drop_queue.hrxq;
2530         }
2531         ind_tbl = mlx5_ind_table_obj_drop_new(dev);
2532         if (!ind_tbl)
2533                 return NULL;
2534         qp = mlx5_glue->create_qp_ex(priv->sh->ctx,
2535                  &(struct ibv_qp_init_attr_ex){
2536                         .qp_type = IBV_QPT_RAW_PACKET,
2537                         .comp_mask =
2538                                 IBV_QP_INIT_ATTR_PD |
2539                                 IBV_QP_INIT_ATTR_IND_TABLE |
2540                                 IBV_QP_INIT_ATTR_RX_HASH,
2541                         .rx_hash_conf = (struct ibv_rx_hash_conf){
2542                                 .rx_hash_function =
2543                                         IBV_RX_HASH_FUNC_TOEPLITZ,
2544                                 .rx_hash_key_len = MLX5_RSS_HASH_KEY_LEN,
2545                                 .rx_hash_key = rss_hash_default_key,
2546                                 .rx_hash_fields_mask = 0,
2547                                 },
2548                         .rwq_ind_tbl = ind_tbl->ind_table,
2549                         .pd = priv->sh->pd
2550                  });
2551         if (!qp) {
2552                 DEBUG("port %u cannot allocate QP for drop queue",
2553                       dev->data->port_id);
2554                 rte_errno = errno;
2555                 goto error;
2556         }
2557         hrxq = rte_calloc(__func__, 1, sizeof(*hrxq), 0);
2558         if (!hrxq) {
2559                 DRV_LOG(WARNING,
2560                         "port %u cannot allocate memory for drop queue",
2561                         dev->data->port_id);
2562                 rte_errno = ENOMEM;
2563                 goto error;
2564         }
2565         hrxq->ind_table = ind_tbl;
2566         hrxq->qp = qp;
2567 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
2568         hrxq->action = mlx5_glue->dv_create_flow_action_dest_ibv_qp(hrxq->qp);
2569         if (!hrxq->action) {
2570                 rte_errno = errno;
2571                 goto error;
2572         }
2573 #endif
2574         priv->drop_queue.hrxq = hrxq;
2575         rte_atomic32_set(&hrxq->refcnt, 1);
2576         return hrxq;
2577 error:
2578         if (ind_tbl)
2579                 mlx5_ind_table_obj_drop_release(dev);
2580         return NULL;
2581 }
2582
2583 /**
2584  * Release a drop hash Rx queue.
2585  *
2586  * @param dev
2587  *   Pointer to Ethernet device.
2588  */
2589 void
2590 mlx5_hrxq_drop_release(struct rte_eth_dev *dev)
2591 {
2592         struct mlx5_priv *priv = dev->data->dev_private;
2593         struct mlx5_hrxq *hrxq = priv->drop_queue.hrxq;
2594
2595         if (rte_atomic32_dec_and_test(&hrxq->refcnt)) {
2596 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
2597                 mlx5_glue->destroy_flow_action(hrxq->action);
2598 #endif
2599                 claim_zero(mlx5_glue->destroy_qp(hrxq->qp));
2600                 mlx5_ind_table_obj_drop_release(dev);
2601                 rte_free(hrxq);
2602                 priv->drop_queue.hrxq = NULL;
2603         }
2604 }