drivers/net/mlx5/windows/mlx5_os.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright 2020 Mellanox Technologies, Ltd
   3  */
   4
   5 #include <errno.h>
   6 #include <stdalign.h>
   7 #include <stddef.h>
   8 #include <stdint.h>
   9 #include <stdlib.h>
  10
  11 #include <rte_windows.h>
  12 #include <ethdev_pci.h>
  13
  14 #include <mlx5_glue.h>
  15 #include <mlx5_devx_cmds.h>
  16 #include <mlx5_common.h>
  17 #include <mlx5_common_mp.h>
  18 #include <mlx5_common_mr.h>
  19 #include <mlx5_malloc.h>
  20
  21 #include "mlx5_defs.h"
  22 #include "mlx5.h"
  23 #include "mlx5_common_os.h"
  24 #include "mlx5_utils.h"
  25 #include "mlx5_rxtx.h"
  26 #include "mlx5_rx.h"
  27 #include "mlx5_tx.h"
  28 #include "mlx5_autoconf.h"
  29 #include "mlx5_flow.h"
  30 #include "mlx5_devx.h"
  31
  32 static const char *MZ_MLX5_PMD_SHARED_DATA = "mlx5_pmd_shared_data";
  33
  34 /* Spinlock for mlx5_shared_data allocation. */
  35 static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
  36
  37 /* rte flow indexed pool configuration. */
  38 static struct mlx5_indexed_pool_config icfg[] = {
  39         {
  40                 .size = sizeof(struct rte_flow),
  41                 .trunk_size = 64,
  42                 .need_lock = 1,
  43                 .release_mem_en = 0,
  44                 .malloc = mlx5_malloc,
  45                 .free = mlx5_free,
  46                 .per_core_cache = 0,
  47                 .type = "ctl_flow_ipool",
  48         },
  49         {
  50                 .size = sizeof(struct rte_flow),
  51                 .trunk_size = 64,
  52                 .grow_trunk = 3,
  53                 .grow_shift = 2,
  54                 .need_lock = 1,
  55                 .release_mem_en = 0,
  56                 .malloc = mlx5_malloc,
  57                 .free = mlx5_free,
  58                 .per_core_cache = 1 << 14,
  59                 .type = "rte_flow_ipool",
  60         },
  61         {
  62                 .size = sizeof(struct rte_flow),
  63                 .trunk_size = 64,
  64                 .grow_trunk = 3,
  65                 .grow_shift = 2,
  66                 .need_lock = 1,
  67                 .release_mem_en = 0,
  68                 .malloc = mlx5_malloc,
  69                 .free = mlx5_free,
  70                 .per_core_cache = 0,
  71                 .type = "mcp_flow_ipool",
  72         },
  73 };
  74
  75 /**
  76  * Initialize shared data between primary and secondary process.
  77  *
  78  * A memzone is reserved by primary process and secondary processes attach to
  79  * the memzone.
  80  *
  81  * @return
  82  *   0 on success, a negative errno value otherwise and rte_errno is set.
  83  */
  84 static int
  85 mlx5_init_shared_data(void)
  86 {
  87         const struct rte_memzone *mz;
  88         int ret = 0;
  89
  90         rte_spinlock_lock(&mlx5_shared_data_lock);
  91         if (mlx5_shared_data == NULL) {
  92                 /* Allocate shared memory. */
  93                 mz = rte_memzone_reserve(MZ_MLX5_PMD_SHARED_DATA,
  94                                          sizeof(*mlx5_shared_data),
  95                                          SOCKET_ID_ANY, 0);
  96                 if (mz == NULL) {
  97                         DRV_LOG(ERR,
  98                                 "Cannot allocate mlx5 shared data");
  99                         ret = -rte_errno;
 100                         goto error;
 101                 }
 102                 mlx5_shared_data = mz->addr;
 103                 memset(mlx5_shared_data, 0, sizeof(*mlx5_shared_data));
 104                 rte_spinlock_init(&mlx5_shared_data->lock);
 105         }
 106 error:
 107         rte_spinlock_unlock(&mlx5_shared_data_lock);
 108         return ret;
 109 }
 110
 111 /**
 112  * PMD global initialization.
 113  *
 114  * Independent from individual device, this function initializes global
 115  * per-PMD data structures distinguishing primary and secondary processes.
 116  * Hence, each initialization is called once per a process.
 117  *
 118  * @return
 119  *   0 on success, a negative errno value otherwise and rte_errno is set.
 120  */
 121 static int
 122 mlx5_init_once(void)
 123 {
 124         if (mlx5_init_shared_data())
 125                 return -rte_errno;
 126         return 0;
 127 }
 128
 129 /**
 130  * Get mlx5 device attributes.
 131  *
 132  * @param cdev
 133  *   Pointer to mlx5 device.
 134  *
 135  * @param device_attr
 136  *   Pointer to mlx5 device attributes.
 137  *
 138  * @return
 139  *   0 on success, non zero error number otherwise.
 140  */
 141 int
 142 mlx5_os_get_dev_attr(struct mlx5_common_device *cdev,
 143                      struct mlx5_dev_attr *device_attr)
 144 {
 145         struct mlx5_context *mlx5_ctx;
 146         void *pv_iseg = NULL;
 147         u32 cb_iseg = 0;
 148         int err = 0;
 149
 150         if (!cdev || !cdev->ctx)
 151                 return -EINVAL;
 152         mlx5_ctx = (struct mlx5_context *)cdev->ctx;
 153         memset(device_attr, 0, sizeof(*device_attr));
 154         device_attr->max_cq = 1 << cdev->config.hca_attr.log_max_cq;
 155         device_attr->max_qp = 1 << cdev->config.hca_attr.log_max_qp;
 156         device_attr->max_qp_wr = 1 << cdev->config.hca_attr.log_max_qp_sz;
 157         device_attr->max_cqe = 1 << cdev->config.hca_attr.log_max_cq_sz;
 158         device_attr->max_mr = 1 << cdev->config.hca_attr.log_max_mrw_sz;
 159         device_attr->max_pd = 1 << cdev->config.hca_attr.log_max_pd;
 160         device_attr->max_srq = 1 << cdev->config.hca_attr.log_max_srq;
 161         device_attr->max_srq_wr = 1 << cdev->config.hca_attr.log_max_srq_sz;
 162         device_attr->max_tso = 1 << cdev->config.hca_attr.max_lso_cap;
 163         if (cdev->config.hca_attr.rss_ind_tbl_cap) {
 164                 device_attr->max_rwq_indirection_table_size =
 165                         1 << cdev->config.hca_attr.rss_ind_tbl_cap;
 166         }
 167         device_attr->sw_parsing_offloads =
 168                 mlx5_get_supported_sw_parsing_offloads(&cdev->config.hca_attr);
 169         device_attr->tunnel_offloads_caps =
 170                 mlx5_get_supported_tunneling_offloads(&cdev->config.hca_attr);
 171         pv_iseg = mlx5_glue->query_hca_iseg(mlx5_ctx, &cb_iseg);
 172         if (pv_iseg == NULL) {
 173                 DRV_LOG(ERR, "Failed to get device hca_iseg");
 174                 return errno;
 175         }
 176         if (!err) {
 177                 snprintf(device_attr->fw_ver, 64, "%x.%x.%04x",
 178                         MLX5_GET(initial_seg, pv_iseg, fw_rev_major),
 179                         MLX5_GET(initial_seg, pv_iseg, fw_rev_minor),
 180                         MLX5_GET(initial_seg, pv_iseg, fw_rev_subminor));
 181         }
 182         return err;
 183 }
 184
 185 /**
 186  * Initialize DR related data within private structure.
 187  * Routine checks the reference counter and does actual
 188  * resources creation/initialization only if counter is zero.
 189  *
 190  * @param[in] priv
 191  *   Pointer to the private device data structure.
 192  *
 193  * @return
 194  *   Zero on success, positive error code otherwise.
 195  */
 196 static int
 197 mlx5_alloc_shared_dr(struct mlx5_priv *priv)
 198 {
 199         struct mlx5_dev_ctx_shared *sh = priv->sh;
 200         int err = 0;
 201
 202         if (!sh->flow_tbls)
 203                 err = mlx5_alloc_table_hash_list(priv);
 204         else
 205                 DRV_LOG(DEBUG, "sh->flow_tbls[%p] already created, reuse",
 206                         (void *)sh->flow_tbls);
 207         return err;
 208 }
 209 /**
 210  * Destroy DR related data within private structure.
 211  *
 212  * @param[in] priv
 213  *   Pointer to the private device data structure.
 214  */
 215 void
 216 mlx5_os_free_shared_dr(struct mlx5_priv *priv)
 217 {
 218         mlx5_free_table_hash_list(priv);
 219 }
 220
 221 /**
 222  * Set the completion channel file descriptor interrupt as non-blocking.
 223  * Currently it has no support under Windows.
 224  *
 225  * @param[in] rxq_obj
 226  *   Pointer to RQ channel object, which includes the channel fd
 227  *
 228  * @param[out] fd
 229  *   The file descriptor (representing the intetrrupt) used in this channel.
 230  *
 231  * @return
 232  *   0 on successfully setting the fd to non-blocking, non-zero otherwise.
 233  */
 234 int
 235 mlx5_os_set_nonblock_channel_fd(int fd)
 236 {
 237         (void)fd;
 238         DRV_LOG(WARNING, "%s: is not supported", __func__);
 239         return -ENOTSUP;
 240 }
 241
 242 /**
 243  * DV flow counter mode detect and config.
 244  *
 245  * @param dev
 246  *   Pointer to rte_eth_dev structure.
 247  *
 248  */
 249 static void
 250 mlx5_flow_counter_mode_config(struct rte_eth_dev *dev __rte_unused)
 251 {
 252 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
 253         struct mlx5_priv *priv = dev->data->dev_private;
 254         struct mlx5_dev_ctx_shared *sh = priv->sh;
 255         bool fallback;
 256
 257 #ifndef HAVE_IBV_DEVX_ASYNC
 258         fallback = true;
 259 #else
 260         fallback = false;
 261         if (!sh->devx || !priv->config.dv_flow_en ||
 262             !priv->config.hca_attr.flow_counters_dump ||
 263             !(priv->config.hca_attr.flow_counter_bulk_alloc_bitmap & 0x4) ||
 264             (mlx5_flow_dv_discover_counter_offset_support(dev) == -ENOTSUP))
 265                 fallback = true;
 266 #endif
 267         if (fallback)
 268                 DRV_LOG(INFO, "Use fall-back DV counter management. Flow "
 269                         "counter dump:%d, bulk_alloc_bitmap:0x%hhx.",
 270                         priv->config.hca_attr.flow_counters_dump,
 271                         priv->config.hca_attr.flow_counter_bulk_alloc_bitmap);
 272         /* Initialize fallback mode only on the port initializes sh. */
 273         if (sh->refcnt == 1)
 274                 sh->cmng.counter_fallback = fallback;
 275         else if (fallback != sh->cmng.counter_fallback)
 276                 DRV_LOG(WARNING, "Port %d in sh has different fallback mode "
 277                         "with others:%d.", PORT_ID(priv), fallback);
 278 #endif
 279 }
 280
 281 /**
 282  * Spawn an Ethernet device from DevX information.
 283  *
 284  * @param dpdk_dev
 285  *   Backing DPDK device.
 286  * @param spawn
 287  *   Verbs device parameters (name, port, switch_info) to spawn.
 288  * @param config
 289  *   Device configuration parameters.
 290  *
 291  * @return
 292  *   A valid Ethernet device object on success, NULL otherwise and rte_errno
 293  *   is set. The following errors are defined:
 294  *
 295  *   EEXIST: device is already spawned
 296  */
 297 static struct rte_eth_dev *
 298 mlx5_dev_spawn(struct rte_device *dpdk_dev,
 299                struct mlx5_dev_spawn_data *spawn,
 300                struct mlx5_dev_config *config)
 301 {
 302         const struct mlx5_switch_info *switch_info = &spawn->info;
 303         struct mlx5_dev_ctx_shared *sh = NULL;
 304         struct mlx5_dev_attr device_attr;
 305         struct rte_eth_dev *eth_dev = NULL;
 306         struct mlx5_priv *priv = NULL;
 307         int err = 0;
 308         unsigned int cqe_comp;
 309         struct rte_ether_addr mac;
 310         char name[RTE_ETH_NAME_MAX_LEN];
 311         int own_domain_id = 0;
 312         uint16_t port_id;
 313         int i;
 314
 315         /* Build device name. */
 316         strlcpy(name, dpdk_dev->name, sizeof(name));
 317         /* check if the device is already spawned */
 318         if (rte_eth_dev_get_port_by_name(name, &port_id) == 0) {
 319                 rte_errno = EEXIST;
 320                 return NULL;
 321         }
 322         DRV_LOG(DEBUG, "naming Ethernet device \"%s\"", name);
 323         /*
 324          * Some parameters are needed in advance to create device context. We
 325          * process the devargs here to get ones, and later process devargs
 326          * again to override some hardware settings.
 327          */
 328         err = mlx5_args(config, dpdk_dev->devargs);
 329         if (err) {
 330                 err = rte_errno;
 331                 DRV_LOG(ERR, "failed to process device arguments: %s",
 332                         strerror(rte_errno));
 333                 goto error;
 334         }
 335         sh = mlx5_alloc_shared_dev_ctx(spawn, config);
 336         if (!sh)
 337                 return NULL;
 338         /* Initialize the shutdown event in mlx5_dev_spawn to
 339          * support mlx5_is_removed for Windows.
 340          */
 341         err = mlx5_glue->devx_init_showdown_event(sh->cdev->ctx);
 342         if (err) {
 343                 DRV_LOG(ERR, "failed to init showdown event: %s",
 344                         strerror(errno));
 345                 goto error;
 346         }
 347         DRV_LOG(DEBUG, "MPW isn't supported");
 348         mlx5_os_get_dev_attr(sh->cdev, &device_attr);
 349         config->swp = device_attr.sw_parsing_offloads &
 350                 (MLX5_SW_PARSING_CAP | MLX5_SW_PARSING_CSUM_CAP |
 351                  MLX5_SW_PARSING_TSO_CAP);
 352         config->ind_table_max_size =
 353                 sh->device_attr.max_rwq_indirection_table_size;
 354         cqe_comp = 0;
 355         config->cqe_comp = cqe_comp;
 356         config->tunnel_en = device_attr.tunnel_offloads_caps &
 357                 (MLX5_TUNNELED_OFFLOADS_VXLAN_CAP |
 358                  MLX5_TUNNELED_OFFLOADS_GRE_CAP |
 359                  MLX5_TUNNELED_OFFLOADS_GENEVE_CAP);
 360         if (config->tunnel_en) {
 361                 DRV_LOG(DEBUG, "tunnel offloading is supported for %s%s%s",
 362                 config->tunnel_en &
 363                 MLX5_TUNNELED_OFFLOADS_VXLAN_CAP ? "[VXLAN]" : "",
 364                 config->tunnel_en &
 365                 MLX5_TUNNELED_OFFLOADS_GRE_CAP ? "[GRE]" : "",
 366                 config->tunnel_en &
 367                 MLX5_TUNNELED_OFFLOADS_GENEVE_CAP ? "[GENEVE]" : ""
 368                 );
 369         } else {
 370                 DRV_LOG(DEBUG, "tunnel offloading is not supported");
 371         }
 372         DRV_LOG(DEBUG, "MPLS over GRE/UDP tunnel offloading is no supported");
 373         config->mpls_en = 0;
 374         /* Allocate private eth device data. */
 375         priv = mlx5_malloc(MLX5_MEM_ZERO | MLX5_MEM_RTE,
 376                            sizeof(*priv),
 377                            RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
 378         if (priv == NULL) {
 379                 DRV_LOG(ERR, "priv allocation failure");
 380                 err = ENOMEM;
 381                 goto error;
 382         }
 383         priv->sh = sh;
 384         priv->dev_port = spawn->phys_port;
 385         priv->pci_dev = spawn->pci_dev;
 386         priv->mtu = RTE_ETHER_MTU;
 387         priv->mp_id.port_id = port_id;
 388         strlcpy(priv->mp_id.name, MLX5_MP_NAME, RTE_MP_MAX_NAME_LEN);
 389         priv->representor = !!switch_info->representor;
 390         priv->master = !!switch_info->master;
 391         priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
 392         priv->vport_meta_tag = 0;
 393         priv->vport_meta_mask = 0;
 394         priv->pf_bond = spawn->pf_bond;
 395         priv->vport_id = -1;
 396         /* representor_id field keeps the unmodified VF index. */
 397         priv->representor_id = -1;
 398         /*
 399          * Look for sibling devices in order to reuse their switch domain
 400          * if any, otherwise allocate one.
 401          */
 402         MLX5_ETH_FOREACH_DEV(port_id, dpdk_dev) {
 403                 const struct mlx5_priv *opriv =
 404                         rte_eth_devices[port_id].data->dev_private;
 405
 406                 if (!opriv ||
 407                     opriv->sh != priv->sh ||
 408                         opriv->domain_id ==
 409                         RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID)
 410                         continue;
 411                 priv->domain_id = opriv->domain_id;
 412                 break;
 413         }
 414         if (priv->domain_id == RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
 415                 err = rte_eth_switch_domain_alloc(&priv->domain_id);
 416                 if (err) {
 417                         err = rte_errno;
 418                         DRV_LOG(ERR, "unable to allocate switch domain: %s",
 419                                 strerror(rte_errno));
 420                         goto error;
 421                 }
 422                 own_domain_id = 1;
 423         }
 424         /* Override some values set by hardware configuration. */
 425         mlx5_args(config, dpdk_dev->devargs);
 426         err = mlx5_dev_check_sibling_config(priv, config, dpdk_dev);
 427         if (err)
 428                 goto error;
 429         DRV_LOG(DEBUG, "counters are not supported");
 430         config->ind_table_max_size =
 431                 sh->device_attr.max_rwq_indirection_table_size;
 432         /*
 433          * Remove this check once DPDK supports larger/variable
 434          * indirection tables.
 435          */
 436         if (config->ind_table_max_size > (unsigned int)ETH_RSS_RETA_SIZE_512)
 437                 config->ind_table_max_size = ETH_RSS_RETA_SIZE_512;
 438         DRV_LOG(DEBUG, "maximum Rx indirection table size is %u",
 439                 config->ind_table_max_size);
 440         if (config->hw_padding) {
 441                 DRV_LOG(DEBUG, "Rx end alignment padding isn't supported");
 442                 config->hw_padding = 0;
 443         }
 444         config->tso = (sh->device_attr.max_tso > 0);
 445         if (config->tso)
 446                 config->tso_max_payload_sz = sh->device_attr.max_tso;
 447         DRV_LOG(DEBUG, "%sMPS is %s.",
 448                 config->mps == MLX5_MPW_ENHANCED ? "enhanced " :
 449                 config->mps == MLX5_MPW ? "legacy " : "",
 450                 config->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
 451         if (config->cqe_comp && !cqe_comp) {
 452                 DRV_LOG(WARNING, "Rx CQE compression isn't supported.");
 453                 config->cqe_comp = 0;
 454         }
 455         if (sh->devx) {
 456                 config->hca_attr = sh->cdev->config.hca_attr;
 457                 config->hw_csum = config->hca_attr.csum_cap;
 458                 DRV_LOG(DEBUG, "checksum offloading is %ssupported",
 459                     (config->hw_csum ? "" : "not "));
 460                 config->hw_vlan_strip = config->hca_attr.vlan_cap;
 461                 DRV_LOG(DEBUG, "VLAN stripping is %ssupported",
 462                         (config->hw_vlan_strip ? "" : "not "));
 463                 config->hw_fcs_strip = config->hca_attr.scatter_fcs;
 464         }
 465         if (sh->devx) {
 466                 uint32_t reg[MLX5_ST_SZ_DW(register_mtutc)];
 467
 468                 err = config->hca_attr.access_register_user ?
 469                         mlx5_devx_cmd_register_read
 470                                 (sh->cdev->ctx, MLX5_REGISTER_ID_MTUTC, 0,
 471                                 reg, MLX5_ST_SZ_DW(register_mtutc)) : ENOTSUP;
 472                 if (!err) {
 473                         uint32_t ts_mode;
 474
 475                         /* MTUTC register is read successfully. */
 476                         ts_mode = MLX5_GET(register_mtutc, reg,
 477                                            time_stamp_mode);
 478                         if (ts_mode == MLX5_MTUTC_TIMESTAMP_MODE_REAL_TIME)
 479                                 config->rt_timestamp = 1;
 480                 } else {
 481                         /* Kernel does not support register reading. */
 482                         if (config->hca_attr.dev_freq_khz ==
 483                                                  (NS_PER_S / MS_PER_S))
 484                                 config->rt_timestamp = 1;
 485                 }
 486         }
 487         if (config->mprq.enabled) {
 488                 DRV_LOG(WARNING, "Multi-Packet RQ isn't supported");
 489                 config->mprq.enabled = 0;
 490         }
 491         if (config->max_dump_files_num == 0)
 492                 config->max_dump_files_num = 128;
 493         eth_dev = rte_eth_dev_allocate(name);
 494         if (eth_dev == NULL) {
 495                 DRV_LOG(ERR, "can not allocate rte ethdev");
 496                 err = ENOMEM;
 497                 goto error;
 498         }
 499         if (priv->representor) {
 500                 eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
 501                 eth_dev->data->representor_id = priv->representor_id;
 502                 MLX5_ETH_FOREACH_DEV(port_id, dpdk_dev) {
 503                         struct mlx5_priv *opriv =
 504                                 rte_eth_devices[port_id].data->dev_private;
 505                         if (opriv &&
 506                             opriv->master &&
 507                             opriv->domain_id == priv->domain_id &&
 508                             opriv->sh == priv->sh) {
 509                                 eth_dev->data->backer_port_id = port_id;
 510                                 break;
 511                         }
 512                 }
 513                 if (port_id >= RTE_MAX_ETHPORTS)
 514                         eth_dev->data->backer_port_id = eth_dev->data->port_id;
 515         }
 516         /*
 517          * Store associated network device interface index. This index
 518          * is permanent throughout the lifetime of device. So, we may store
 519          * the ifindex here and use the cached value further.
 520          */
 521         MLX5_ASSERT(spawn->ifindex);
 522         priv->if_index = spawn->ifindex;
 523         eth_dev->data->dev_private = priv;
 524         priv->dev_data = eth_dev->data;
 525         eth_dev->data->mac_addrs = priv->mac;
 526         eth_dev->device = dpdk_dev;
 527         eth_dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
 528         /* Configure the first MAC address by default. */
 529         if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
 530                 DRV_LOG(ERR,
 531                         "port %u cannot get MAC address, is mlx5_en"
 532                         " loaded? (errno: %s).",
 533                         eth_dev->data->port_id, strerror(rte_errno));
 534                 err = ENODEV;
 535                 goto error;
 536         }
 537         DRV_LOG(INFO,
 538                 "port %u MAC address is " RTE_ETHER_ADDR_PRT_FMT,
 539                 eth_dev->data->port_id, RTE_ETHER_ADDR_BYTES(&mac));
 540 #ifdef RTE_LIBRTE_MLX5_DEBUG
 541         {
 542                 char ifname[MLX5_NAMESIZE];
 543
 544                 if (mlx5_get_ifname(eth_dev, &ifname) == 0)
 545                         DRV_LOG(DEBUG, "port %u ifname is \"%s\"",
 546                                 eth_dev->data->port_id, ifname);
 547                 else
 548                         DRV_LOG(DEBUG, "port %u ifname is unknown.",
 549                                 eth_dev->data->port_id);
 550         }
 551 #endif
 552         /* Get actual MTU if possible. */
 553         err = mlx5_get_mtu(eth_dev, &priv->mtu);
 554         if (err) {
 555                 err = rte_errno;
 556                 goto error;
 557         }
 558         DRV_LOG(DEBUG, "port %u MTU is %u.", eth_dev->data->port_id,
 559                 priv->mtu);
 560         /* Initialize burst functions to prevent crashes before link-up. */
 561         eth_dev->rx_pkt_burst = removed_rx_burst;
 562         eth_dev->tx_pkt_burst = removed_tx_burst;
 563         eth_dev->dev_ops = &mlx5_dev_ops;
 564         eth_dev->rx_descriptor_status = mlx5_rx_descriptor_status;
 565         eth_dev->tx_descriptor_status = mlx5_tx_descriptor_status;
 566         eth_dev->rx_queue_count = mlx5_rx_queue_count;
 567         /* Register MAC address. */
 568         claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
 569         priv->ctrl_flows = 0;
 570         TAILQ_INIT(&priv->flow_meters);
 571         priv->mtr_profile_tbl = mlx5_l3t_create(MLX5_L3T_TYPE_PTR);
 572         if (!priv->mtr_profile_tbl)
 573                 goto error;
 574         /* Bring Ethernet device up. */
 575         DRV_LOG(DEBUG, "port %u forcing Ethernet interface up.",
 576                 eth_dev->data->port_id);
 577         /* nl calls are unsupported - set to -1 not to fail on release */
 578         priv->nl_socket_rdma = -1;
 579         priv->nl_socket_route = -1;
 580         mlx5_set_link_up(eth_dev);
 581         /*
 582          * Even though the interrupt handler is not installed yet,
 583          * interrupts will still trigger on the async_fd from
 584          * Verbs context returned by ibv_open_device().
 585          */
 586         mlx5_link_update(eth_dev, 0);
 587         config->dv_esw_en = 0;
 588         /* Detect minimal data bytes to inline. */
 589         mlx5_set_min_inline(spawn, config);
 590         /* Store device configuration on private structure. */
 591         priv->config = *config;
 592         for (i = 0; i < MLX5_FLOW_TYPE_MAXI; i++) {
 593                 icfg[i].release_mem_en = !!config->reclaim_mode;
 594                 if (config->reclaim_mode)
 595                         icfg[i].per_core_cache = 0;
 596                 priv->flows[i] = mlx5_ipool_create(&icfg[i]);
 597                 if (!priv->flows[i])
 598                         goto error;
 599         }
 600         /* Create context for virtual machine VLAN workaround. */
 601         priv->vmwa_context = NULL;
 602         if (config->dv_flow_en) {
 603                 err = mlx5_alloc_shared_dr(priv);
 604                 if (err)
 605                         goto error;
 606         }
 607         /* No supported flow priority number detection. */
 608         priv->config.flow_prio = -1;
 609         if (!priv->config.dv_esw_en &&
 610             priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
 611                 DRV_LOG(WARNING, "metadata mode %u is not supported "
 612                                  "(no E-Switch)", priv->config.dv_xmeta_en);
 613                 priv->config.dv_xmeta_en = MLX5_XMETA_MODE_LEGACY;
 614         }
 615         mlx5_set_metadata_mask(eth_dev);
 616         if (priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
 617             !priv->sh->dv_regc0_mask) {
 618                 DRV_LOG(ERR, "metadata mode %u is not supported "
 619                              "(no metadata reg_c[0] is available).",
 620                              priv->config.dv_xmeta_en);
 621                         err = ENOTSUP;
 622                         goto error;
 623         }
 624         priv->hrxqs = mlx5_list_create("hrxq", eth_dev, true,
 625                 mlx5_hrxq_create_cb, mlx5_hrxq_match_cb,
 626                 mlx5_hrxq_remove_cb, mlx5_hrxq_clone_cb,
 627                 mlx5_hrxq_clone_free_cb);
 628         /* Query availability of metadata reg_c's. */
 629         err = mlx5_flow_discover_mreg_c(eth_dev);
 630         if (err < 0) {
 631                 err = -err;
 632                 goto error;
 633         }
 634         if (!mlx5_flow_ext_mreg_supported(eth_dev)) {
 635                 DRV_LOG(DEBUG,
 636                         "port %u extensive metadata register is not supported.",
 637                         eth_dev->data->port_id);
 638                 if (priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
 639                         DRV_LOG(ERR, "metadata mode %u is not supported "
 640                                      "(no metadata registers available).",
 641                                      priv->config.dv_xmeta_en);
 642                         err = ENOTSUP;
 643                         goto error;
 644                 }
 645         }
 646         if (sh->devx && config->dv_flow_en) {
 647                 priv->obj_ops = devx_obj_ops;
 648         } else {
 649                 DRV_LOG(ERR, "Flow mode %u is not supported "
 650                                 "(Windows flow must be DevX with DV flow enabled).",
 651                                 priv->config.dv_flow_en);
 652                 err = ENOTSUP;
 653                 goto error;
 654         }
 655         mlx5_flow_counter_mode_config(eth_dev);
 656         return eth_dev;
 657 error:
 658         if (priv) {
 659                 if (priv->mtr_profile_tbl)
 660                         mlx5_l3t_destroy(priv->mtr_profile_tbl);
 661                 if (own_domain_id)
 662                         claim_zero(rte_eth_switch_domain_free(priv->domain_id));
 663                 mlx5_free(priv);
 664                 if (eth_dev != NULL)
 665                         eth_dev->data->dev_private = NULL;
 666         }
 667         if (eth_dev != NULL) {
 668                 /* mac_addrs must not be freed alone because part of
 669                  * dev_private
 670                  **/
 671                 eth_dev->data->mac_addrs = NULL;
 672                 rte_eth_dev_release_port(eth_dev);
 673         }
 674         if (sh)
 675                 mlx5_free_shared_dev_ctx(sh);
 676         MLX5_ASSERT(err > 0);
 677         rte_errno = err;
 678         return NULL;
 679 }
 680
 681 /**
 682  * This function should share events between multiple ports of single IB
 683  * device.  Currently it has no support under Windows.
 684  *
 685  * @param sh
 686  *   Pointer to mlx5_dev_ctx_shared object.
 687  */
 688 void
 689 mlx5_os_dev_shared_handler_install(struct mlx5_dev_ctx_shared *sh)
 690 {
 691         (void)sh;
 692         DRV_LOG(WARNING, "%s: is not supported", __func__);
 693 }
 694
 695 /**
 696  * This function should share events between multiple ports of single IB
 697  * device.  Currently it has no support under Windows.
 698  *
 699  * @param dev
 700  *   Pointer to mlx5_dev_ctx_shared object.
 701  */
 702 void
 703 mlx5_os_dev_shared_handler_uninstall(struct mlx5_dev_ctx_shared *sh)
 704 {
 705         (void)sh;
 706         DRV_LOG(WARNING, "%s: is not supported", __func__);
 707 }
 708
 709 /**
 710  * Read statistics by a named counter.
 711  *
 712  * @param[in] priv
 713  *   Pointer to the private device data structure.
 714  * @param[in] ctr_name
 715  *   Pointer to the name of the statistic counter to read
 716  * @param[out] stat
 717  *   Pointer to read statistic value.
 718  * @return
 719  *   0 on success and stat is valud, 1 if failed to read the value
 720  *   rte_errno is set.
 721  *
 722  */
 723 int
 724 mlx5_os_read_dev_stat(struct mlx5_priv *priv, const char *ctr_name,
 725                       uint64_t *stat)
 726 {
 727         RTE_SET_USED(priv);
 728         RTE_SET_USED(ctr_name);
 729         RTE_SET_USED(stat);
 730         DRV_LOG(WARNING, "%s: is not supported", __func__);
 731         return -ENOTSUP;
 732 }
 733
 734 /**
 735  * Flush device MAC addresses
 736  * Currently it has no support under Windows.
 737  *
 738  * @param dev
 739  *   Pointer to Ethernet device structure.
 740  *
 741  */
 742 void
 743 mlx5_os_mac_addr_flush(struct rte_eth_dev *dev)
 744 {
 745         (void)dev;
 746         DRV_LOG(WARNING, "%s: is not supported", __func__);
 747 }
 748
 749 /**
 750  * Remove a MAC address from device
 751  * Currently it has no support under Windows.
 752  *
 753  * @param dev
 754  *   Pointer to Ethernet device structure.
 755  * @param index
 756  *   MAC address index.
 757  */
 758 void
 759 mlx5_os_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
 760 {
 761         (void)dev;
 762         (void)(index);
 763         DRV_LOG(WARNING, "%s: is not supported", __func__);
 764 }
 765
 766 /**
 767  * Adds a MAC address to the device
 768  * Currently it has no support under Windows.
 769  *
 770  * @param dev
 771  *   Pointer to Ethernet device structure.
 772  * @param mac_addr
 773  *   MAC address to register.
 774  * @param index
 775  *   MAC address index.
 776  *
 777  * @return
 778  *   0 on success, a negative errno value otherwise
 779  */
 780 int
 781 mlx5_os_mac_addr_add(struct rte_eth_dev *dev, struct rte_ether_addr *mac,
 782                      uint32_t index)
 783 {
 784         (void)index;
 785         struct rte_ether_addr lmac;
 786
 787         if (mlx5_get_mac(dev, &lmac.addr_bytes)) {
 788                 DRV_LOG(ERR,
 789                         "port %u cannot get MAC address, is mlx5_en"
 790                         " loaded? (errno: %s)",
 791                         dev->data->port_id, strerror(rte_errno));
 792                 return rte_errno;
 793         }
 794         if (!rte_is_same_ether_addr(&lmac, mac)) {
 795                 DRV_LOG(ERR,
 796                         "adding new mac address to device is unsupported");
 797                 return -ENOTSUP;
 798         }
 799         return 0;
 800 }
 801
 802 /**
 803  * Modify a VF MAC address
 804  * Currently it has no support under Windows.
 805  *
 806  * @param priv
 807  *   Pointer to device private data.
 808  * @param mac_addr
 809  *   MAC address to modify into.
 810  * @param iface_idx
 811  *   Net device interface index
 812  * @param vf_index
 813  *   VF index
 814  *
 815  * @return
 816  *   0 on success, a negative errno value otherwise
 817  */
 818 int
 819 mlx5_os_vf_mac_addr_modify(struct mlx5_priv *priv,
 820                            unsigned int iface_idx,
 821                            struct rte_ether_addr *mac_addr,
 822                            int vf_index)
 823 {
 824         (void)priv;
 825         (void)iface_idx;
 826         (void)mac_addr;
 827         (void)vf_index;
 828         DRV_LOG(WARNING, "%s: is not supported", __func__);
 829         return -ENOTSUP;
 830 }
 831
 832 /**
 833  * Set device promiscuous mode
 834  * Currently it has no support under Windows.
 835  *
 836  * @param dev
 837  *   Pointer to Ethernet device structure.
 838  * @param enable
 839  *   0 - promiscuous is disabled, otherwise - enabled
 840  *
 841  * @return
 842  *   0 on success, a negative error value otherwise
 843  */
 844 int
 845 mlx5_os_set_promisc(struct rte_eth_dev *dev, int enable)
 846 {
 847         (void)dev;
 848         (void)enable;
 849         DRV_LOG(WARNING, "%s: is not supported", __func__);
 850         return -ENOTSUP;
 851 }
 852
 853 /**
 854  * Set device allmulti mode
 855  *
 856  * @param dev
 857  *   Pointer to Ethernet device structure.
 858  * @param enable
 859  *   0 - all multicase is disabled, otherwise - enabled
 860  *
 861  * @return
 862  *   0 on success, a negative error value otherwise
 863  */
 864 int
 865 mlx5_os_set_allmulti(struct rte_eth_dev *dev, int enable)
 866 {
 867         (void)dev;
 868         (void)enable;
 869         DRV_LOG(WARNING, "%s: is not supported", __func__);
 870         return -ENOTSUP;
 871 }
 872
 873 /**
 874  * DPDK callback to register a PCI device.
 875  *
 876  * This function spawns Ethernet devices out of a given device.
 877  *
 878  * @param[in] dev
 879  *   Pointer to the common device.
 880  *
 881  * @return
 882  *   0 on success, a negative errno value otherwise and rte_errno is set.
 883  */
 884 int
 885 mlx5_os_net_probe(struct mlx5_common_device *cdev)
 886 {
 887         struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(cdev->dev);
 888         struct mlx5_dev_spawn_data spawn = {
 889                 .pf_bond = -1,
 890                 .max_port = 1,
 891                 .phys_port = 1,
 892                 .phys_dev_name = mlx5_os_get_ctx_device_name(cdev->ctx),
 893                 .pci_dev = pci_dev,
 894                 .cdev = cdev,
 895                 .ifindex = -1, /* Spawn will assign */
 896                 .info = (struct mlx5_switch_info){
 897                         .name_type = MLX5_PHYS_PORT_NAME_TYPE_UPLINK,
 898                 },
 899         };
 900         struct mlx5_dev_config dev_config = {
 901                 .rx_vec_en = 1,
 902                 .txq_inline_max = MLX5_ARG_UNSET,
 903                 .txq_inline_min = MLX5_ARG_UNSET,
 904                 .txq_inline_mpw = MLX5_ARG_UNSET,
 905                 .txqs_inline = MLX5_ARG_UNSET,
 906                 .mprq = {
 907                         .max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
 908                         .min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
 909                 },
 910                 .dv_flow_en = 1,
 911                 .log_hp_size = MLX5_ARG_UNSET,
 912         };
 913         int ret;
 914         uint32_t restore;
 915
 916         if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
 917                 DRV_LOG(ERR, "Secondary process is not supported on Windows.");
 918                 return -ENOTSUP;
 919         }
 920         ret = mlx5_init_once();
 921         if (ret) {
 922                 DRV_LOG(ERR, "unable to init PMD global data: %s",
 923                         strerror(rte_errno));
 924                 return -rte_errno;
 925         }
 926         /* Device specific configuration. */
 927         switch (pci_dev->id.device_id) {
 928         case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
 929         case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
 930         case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
 931         case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
 932         case PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF:
 933         case PCI_DEVICE_ID_MELLANOX_CONNECTX6VF:
 934         case PCI_DEVICE_ID_MELLANOX_CONNECTXVF:
 935                 dev_config.vf = 1;
 936                 break;
 937         default:
 938                 dev_config.vf = 0;
 939                 break;
 940         }
 941         spawn.eth_dev = mlx5_dev_spawn(cdev->dev, &spawn, &dev_config);
 942         if (!spawn.eth_dev)
 943                 return -rte_errno;
 944         restore = spawn.eth_dev->data->dev_flags;
 945         rte_eth_copy_pci_info(spawn.eth_dev, pci_dev);
 946         /* Restore non-PCI flags cleared by the above call. */
 947         spawn.eth_dev->data->dev_flags |= restore;
 948         rte_eth_dev_probing_finish(spawn.eth_dev);
 949         return 0;
 950 }
 951
 952 const struct mlx5_flow_driver_ops mlx5_flow_verbs_drv_ops = {0};