4 * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of Intel Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
41 #include <sys/queue.h>
43 #include <netinet/ip.h>
45 #include <rte_common.h>
46 #include <rte_memory.h>
48 #include <rte_launch.h>
49 #include <rte_per_lcore.h>
50 #include <rte_lcore.h>
51 #include <rte_branch_prediction.h>
52 #include <rte_atomic.h>
55 #include <rte_debug.h>
56 #include <rte_mempool.h>
57 #include <rte_memcpy.h>
59 #include <rte_ether.h>
60 #include <rte_interrupts.h>
62 #include <rte_ethdev.h>
63 #include <rte_byteorder.h>
64 #include <rte_malloc.h>
65 #include <rte_string_fns.h>
72 * When doing reads from the NIC or the client queues,
75 #define PACKET_READ_SIZE 32
78 * Local buffers to put packets in, used to send packets in bursts to the
81 struct client_rx_buf {
82 struct rte_mbuf *buffer[PACKET_READ_SIZE];
86 /* One buffer per client rx queue - dynamically allocate array */
87 static struct client_rx_buf *cl_rx_buf;
90 get_printable_mac_addr(uint16_t port)
92 static const char err_address[] = "00:00:00:00:00:00";
93 static char addresses[RTE_MAX_ETHPORTS][sizeof(err_address)];
95 if (unlikely(port >= RTE_MAX_ETHPORTS))
97 if (unlikely(addresses[port][0]=='\0')){
98 struct ether_addr mac;
99 rte_eth_macaddr_get(port, &mac);
100 snprintf(addresses[port], sizeof(addresses[port]),
101 "%02x:%02x:%02x:%02x:%02x:%02x\n",
102 mac.addr_bytes[0], mac.addr_bytes[1], mac.addr_bytes[2],
103 mac.addr_bytes[3], mac.addr_bytes[4], mac.addr_bytes[5]);
105 return addresses[port];
109 * This function displays the recorded statistics for each port
110 * and for each client. It uses ANSI terminal codes to clear
111 * screen when called. It is called from a single non-master
112 * thread in the server process, when the process is run with more
113 * than one lcore enabled.
116 do_stats_display(void)
119 const char clr[] = { 27, '[', '2', 'J', '\0' };
120 const char topLeft[] = { 27, '[', '1', ';', '1', 'H','\0' };
121 uint64_t port_tx[RTE_MAX_ETHPORTS], port_tx_drop[RTE_MAX_ETHPORTS];
122 uint64_t client_tx[MAX_CLIENTS], client_tx_drop[MAX_CLIENTS];
124 /* to get TX stats, we need to do some summing calculations */
125 memset(port_tx, 0, sizeof(port_tx));
126 memset(port_tx_drop, 0, sizeof(port_tx_drop));
127 memset(client_tx, 0, sizeof(client_tx));
128 memset(client_tx_drop, 0, sizeof(client_tx_drop));
130 for (i = 0; i < num_clients; i++){
131 const volatile struct tx_stats *tx = &ports->tx_stats[i];
132 for (j = 0; j < ports->num_ports; j++){
133 /* assign to local variables here, save re-reading volatile vars */
134 const uint64_t tx_val = tx->tx[ports->id[j]];
135 const uint64_t drop_val = tx->tx_drop[ports->id[j]];
136 port_tx[j] += tx_val;
137 port_tx_drop[j] += drop_val;
138 client_tx[i] += tx_val;
139 client_tx_drop[i] += drop_val;
143 /* Clear screen and move to top left */
144 printf("%s%s", clr, topLeft);
148 for (i = 0; i < ports->num_ports; i++)
149 printf("Port %u: '%s'\t", (unsigned)ports->id[i],
150 get_printable_mac_addr(ports->id[i]));
152 for (i = 0; i < ports->num_ports; i++){
153 printf("Port %u - rx: %9"PRIu64"\t"
155 (unsigned)ports->id[i], ports->rx_stats.rx[i],
159 printf("\nCLIENTS\n");
161 for (i = 0; i < num_clients; i++){
162 const unsigned long long rx = clients[i].stats.rx;
163 const unsigned long long rx_drop = clients[i].stats.rx_drop;
164 printf("Client %2u - rx: %9llu, rx_drop: %9llu\n"
165 " tx: %9"PRIu64", tx_drop: %9"PRIu64"\n",
166 i, rx, rx_drop, client_tx[i], client_tx_drop[i]);
173 * The function called from each non-master lcore used by the process.
174 * The test_and_set function is used to randomly pick a single lcore on which
175 * the code to display the statistics will run. Otherwise, the code just
179 sleep_lcore(__attribute__((unused)) void *dummy)
181 /* Used to pick a display thread - static, so zero-initialised */
182 static rte_atomic32_t display_stats;
184 /* Only one core should display stats */
185 if (rte_atomic32_test_and_set(&display_stats)) {
186 const unsigned sleeptime = 1;
187 printf("Core %u displaying statistics\n", rte_lcore_id());
189 /* Longer initial pause so above printf is seen */
190 sleep(sleeptime * 3);
192 /* Loop forever: sleep always returns 0 or <= param */
193 while (sleep(sleeptime) <= sleeptime)
200 * Function to set all the client statistic values to zero.
201 * Called at program startup.
208 for (i = 0; i < num_clients; i++)
209 clients[i].stats.rx = clients[i].stats.rx_drop = 0;
213 * send a burst of traffic to a client, assuming there are packets
214 * available to be sent to this client
217 flush_rx_queue(uint16_t client)
222 if (cl_rx_buf[client].count == 0)
225 cl = &clients[client];
226 if (rte_ring_enqueue_bulk(cl->rx_q, (void **)cl_rx_buf[client].buffer,
227 cl_rx_buf[client].count, NULL) == 0){
228 for (j = 0; j < cl_rx_buf[client].count; j++)
229 rte_pktmbuf_free(cl_rx_buf[client].buffer[j]);
230 cl->stats.rx_drop += cl_rx_buf[client].count;
233 cl->stats.rx += cl_rx_buf[client].count;
235 cl_rx_buf[client].count = 0;
239 * marks a packet down to be sent to a particular client process
242 enqueue_rx_packet(uint8_t client, struct rte_mbuf *buf)
244 cl_rx_buf[client].buffer[cl_rx_buf[client].count++] = buf;
248 * This function takes a group of packets and routes them
249 * individually to the client process. Very simply round-robins the packets
250 * without checking any of the packet contents.
253 process_packets(uint32_t port_num __rte_unused,
254 struct rte_mbuf *pkts[], uint16_t rx_count)
259 for (i = 0; i < rx_count; i++) {
260 enqueue_rx_packet(client, pkts[i]);
262 if (++client == num_clients)
266 for (i = 0; i < num_clients; i++)
271 * Function called by the master lcore of the DPDK process.
274 do_packet_forwarding(void)
276 unsigned port_num = 0; /* indexes the port[] array */
279 struct rte_mbuf *buf[PACKET_READ_SIZE];
283 rx_count = rte_eth_rx_burst(ports->id[port_num], 0, \
284 buf, PACKET_READ_SIZE);
285 ports->rx_stats.rx[port_num] += rx_count;
287 /* Now process the NIC packets read */
288 if (likely(rx_count > 0))
289 process_packets(port_num, buf, rx_count);
291 /* move to next port */
292 if (++port_num == ports->num_ports)
298 main(int argc, char *argv[])
300 /* initialise the system */
301 if (init(argc, argv) < 0 )
303 RTE_LOG(INFO, APP, "Finished Process Init.\n");
305 cl_rx_buf = calloc(num_clients, sizeof(cl_rx_buf[0]));
307 /* clear statistics */
310 /* put all other cores to sleep bar master */
311 rte_eal_mp_remote_launch(sleep_lcore, NULL, SKIP_MASTER);
313 do_packet_forwarding();