examples/vm_power_manager/main.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2010-2014 Intel Corporation
   3  */
   4
   5 #include <stdio.h>
   6 #include <string.h>
   7 #include <stdint.h>
   8 #include <sys/epoll.h>
   9 #include <fcntl.h>
  10 #include <unistd.h>
  11 #include <stdlib.h>
  12 #include <signal.h>
  13 #include <errno.h>
  14
  15 #include <sys/queue.h>
  16
  17 #include <rte_common.h>
  18 #include <rte_eal.h>
  19 #include <rte_launch.h>
  20 #include <rte_log.h>
  21 #include <rte_per_lcore.h>
  22 #include <rte_lcore.h>
  23 #include <rte_ethdev.h>
  24 #include <getopt.h>
  25 #include <rte_cycles.h>
  26 #include <rte_debug.h>
  27
  28 #include "channel_manager.h"
  29 #include "channel_monitor.h"
  30 #include "power_manager.h"
  31 #include "vm_power_cli.h"
  32 #include "oob_monitor.h"
  33 #include "parse.h"
  34 #ifdef RTE_LIBRTE_IXGBE_PMD
  35 #include <rte_pmd_ixgbe.h>
  36 #endif
  37 #ifdef RTE_LIBRTE_I40E_PMD
  38 #include <rte_pmd_i40e.h>
  39 #endif
  40 #ifdef RTE_LIBRTE_BNXT_PMD
  41 #include <rte_pmd_bnxt.h>
  42 #endif
  43
  44 #define RX_RING_SIZE 1024
  45 #define TX_RING_SIZE 1024
  46
  47 #define NUM_MBUFS 8191
  48 #define MBUF_CACHE_SIZE 250
  49 #define BURST_SIZE 32
  50
  51 static uint32_t enabled_port_mask;
  52 static volatile bool force_quit;
  53
  54 /****************/
  55 static const struct rte_eth_conf port_conf_default = {
  56         .rxmode = {
  57                 .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
  58         },
  59 };
  60
  61 static inline int
  62 port_init(uint16_t port, struct rte_mempool *mbuf_pool)
  63 {
  64         struct rte_eth_conf port_conf = port_conf_default;
  65         const uint16_t rx_rings = 1, tx_rings = 1;
  66         int retval;
  67         uint16_t q;
  68         struct rte_eth_dev_info dev_info;
  69         struct rte_eth_txconf txq_conf;
  70
  71         if (!rte_eth_dev_is_valid_port(port))
  72                 return -1;
  73
  74         retval = rte_eth_dev_info_get(port, &dev_info);
  75         if (retval != 0) {
  76                 printf("Error during getting device (port %u) info: %s\n",
  77                                 port, strerror(-retval));
  78                 return retval;
  79         }
  80
  81         if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
  82                 port_conf.txmode.offloads |=
  83                         DEV_TX_OFFLOAD_MBUF_FAST_FREE;
  84
  85         /* Configure the Ethernet device. */
  86         retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
  87         if (retval != 0)
  88                 return retval;
  89
  90         /* Allocate and set up 1 RX queue per Ethernet port. */
  91         for (q = 0; q < rx_rings; q++) {
  92                 retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
  93                                 rte_eth_dev_socket_id(port), NULL, mbuf_pool);
  94                 if (retval < 0)
  95                         return retval;
  96         }
  97
  98         txq_conf = dev_info.default_txconf;
  99         txq_conf.offloads = port_conf.txmode.offloads;
 100         /* Allocate and set up 1 TX queue per Ethernet port. */
 101         for (q = 0; q < tx_rings; q++) {
 102                 retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
 103                                 rte_eth_dev_socket_id(port), &txq_conf);
 104                 if (retval < 0)
 105                         return retval;
 106         }
 107
 108         /* Start the Ethernet port. */
 109         retval = rte_eth_dev_start(port);
 110         if (retval < 0)
 111                 return retval;
 112
 113         /* Display the port MAC address. */
 114         struct rte_ether_addr addr;
 115         rte_eth_macaddr_get(port, &addr);
 116         printf("Port %u MAC: %02" PRIx8 " %02" PRIx8 " %02" PRIx8
 117                            " %02" PRIx8 " %02" PRIx8 " %02" PRIx8 "\n",
 118                         (unsigned int)port,
 119                         addr.addr_bytes[0], addr.addr_bytes[1],
 120                         addr.addr_bytes[2], addr.addr_bytes[3],
 121                         addr.addr_bytes[4], addr.addr_bytes[5]);
 122
 123         /* Enable RX in promiscuous mode for the Ethernet device. */
 124         rte_eth_promiscuous_enable(port);
 125
 126
 127         return 0;
 128 }
 129
 130 static int
 131 parse_portmask(const char *portmask)
 132 {
 133         char *end = NULL;
 134         unsigned long pm;
 135
 136         /* parse hexadecimal string */
 137         pm = strtoul(portmask, &end, 16);
 138         if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
 139                 return -1;
 140
 141         if (pm == 0)
 142                 return -1;
 143
 144         return pm;
 145 }
 146 /* Parse the argument given in the command line of the application */
 147 static int
 148 parse_args(int argc, char **argv)
 149 {
 150         int opt, ret, cnt, i;
 151         char **argvopt;
 152         uint16_t *oob_enable;
 153         int option_index;
 154         char *prgname = argv[0];
 155         struct core_info *ci;
 156         float branch_ratio;
 157         static struct option lgopts[] = {
 158                 { "mac-updating", no_argument, 0, 1},
 159                 { "no-mac-updating", no_argument, 0, 0},
 160                 { "core-list", optional_argument, 0, 'l'},
 161                 { "port-list", optional_argument, 0, 'p'},
 162                 { "branch-ratio", optional_argument, 0, 'b'},
 163                 {NULL, 0, 0, 0}
 164         };
 165         argvopt = argv;
 166         ci = get_core_info();
 167
 168         while ((opt = getopt_long(argc, argvopt, "l:p:q:T:b:",
 169                                   lgopts, &option_index)) != EOF) {
 170
 171                 switch (opt) {
 172                 /* portmask */
 173                 case 'p':
 174                         enabled_port_mask = parse_portmask(optarg);
 175                         if (enabled_port_mask == 0) {
 176                                 printf("invalid portmask\n");
 177                                 return -1;
 178                         }
 179                         break;
 180                 case 'l':
 181                         oob_enable = malloc(ci->core_count * sizeof(uint16_t));
 182                         if (oob_enable == NULL) {
 183                                 printf("Error - Unable to allocate memory\n");
 184                                 return -1;
 185                         }
 186                         cnt = parse_set(optarg, oob_enable, ci->core_count);
 187                         if (cnt < 0) {
 188                                 printf("Invalid core-list - [%s]\n",
 189                                                 optarg);
 190                                 free(oob_enable);
 191                                 break;
 192                         }
 193                         for (i = 0; i < ci->core_count; i++) {
 194                                 if (oob_enable[i]) {
 195                                         printf("***Using core %d\n", i);
 196                                         ci->cd[i].oob_enabled = 1;
 197                                         ci->cd[i].global_enabled_cpus = 1;
 198                                 }
 199                         }
 200                         free(oob_enable);
 201                         break;
 202                 case 'b':
 203                         branch_ratio = 0.0;
 204                         if (strlen(optarg))
 205                                 branch_ratio = atof(optarg);
 206                         if (branch_ratio <= 0.0) {
 207                                 printf("invalid branch ratio specified\n");
 208                                 return -1;
 209                         }
 210                         ci->branch_ratio_threshold = branch_ratio;
 211                         printf("***Setting branch ratio to %f\n",
 212                                         branch_ratio);
 213                         break;
 214                 /* long options */
 215                 case 0:
 216                         break;
 217
 218                 default:
 219                         return -1;
 220                 }
 221         }
 222
 223         if (optind >= 0)
 224                 argv[optind-1] = prgname;
 225
 226         ret = optind-1;
 227         optind = 0; /* reset getopt lib */
 228         return ret;
 229 }
 230
 231 static void
 232 check_all_ports_link_status(uint32_t port_mask)
 233 {
 234 #define CHECK_INTERVAL 100 /* 100ms */
 235 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
 236         uint16_t portid, count, all_ports_up, print_flag = 0;
 237         struct rte_eth_link link;
 238
 239         printf("\nChecking link status");
 240         fflush(stdout);
 241         for (count = 0; count <= MAX_CHECK_TIME; count++) {
 242                 if (force_quit)
 243                         return;
 244                 all_ports_up = 1;
 245                 RTE_ETH_FOREACH_DEV(portid) {
 246                         if (force_quit)
 247                                 return;
 248                         if ((port_mask & (1 << portid)) == 0)
 249                                 continue;
 250                         memset(&link, 0, sizeof(link));
 251                         rte_eth_link_get_nowait(portid, &link);
 252                         /* print link status if flag set */
 253                         if (print_flag == 1) {
 254                                 if (link.link_status)
 255                                         printf("Port %d Link Up - speed %u "
 256                                                 "Mbps - %s\n", (uint16_t)portid,
 257                                                 (unsigned int)link.link_speed,
 258                                 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
 259                                         ("full-duplex") : ("half-duplex\n"));
 260                                 else
 261                                         printf("Port %d Link Down\n",
 262                                                 (uint16_t)portid);
 263                                 continue;
 264                         }
 265                        /* clear all_ports_up flag if any link down */
 266                         if (link.link_status == ETH_LINK_DOWN) {
 267                                 all_ports_up = 0;
 268                                 break;
 269                         }
 270                 }
 271                 /* after finally printing all link status, get out */
 272                 if (print_flag == 1)
 273                         break;
 274
 275                 if (all_ports_up == 0) {
 276                         printf(".");
 277                         fflush(stdout);
 278                         rte_delay_ms(CHECK_INTERVAL);
 279                 }
 280
 281                 /* set the print_flag if all ports up or timeout */
 282                 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
 283                         print_flag = 1;
 284                         printf("done\n");
 285                 }
 286         }
 287 }
 288 static int
 289 run_monitor(__attribute__((unused)) void *arg)
 290 {
 291         if (channel_monitor_init() < 0) {
 292                 printf("Unable to initialize channel monitor\n");
 293                 return -1;
 294         }
 295         run_channel_monitor();
 296         return 0;
 297 }
 298
 299 static int
 300 run_core_monitor(__attribute__((unused)) void *arg)
 301 {
 302         if (branch_monitor_init() < 0) {
 303                 printf("Unable to initialize core monitor\n");
 304                 return -1;
 305         }
 306         run_branch_monitor();
 307         return 0;
 308 }
 309
 310 static void
 311 sig_handler(int signo)
 312 {
 313         printf("Received signal %d, exiting...\n", signo);
 314         channel_monitor_exit();
 315         channel_manager_exit();
 316         power_manager_exit();
 317
 318 }
 319
 320 int
 321 main(int argc, char **argv)
 322 {
 323         int ret;
 324         unsigned lcore_id;
 325         unsigned int nb_ports;
 326         struct rte_mempool *mbuf_pool;
 327         uint16_t portid;
 328         struct core_info *ci;
 329
 330
 331         ret = core_info_init();
 332         if (ret < 0)
 333                 rte_panic("Cannot allocate core info\n");
 334
 335         ci = get_core_info();
 336
 337         ret = rte_eal_init(argc, argv);
 338         if (ret < 0)
 339                 rte_panic("Cannot init EAL\n");
 340
 341         signal(SIGINT, sig_handler);
 342         signal(SIGTERM, sig_handler);
 343
 344         argc -= ret;
 345         argv += ret;
 346
 347         /* parse application arguments (after the EAL ones) */
 348         ret = parse_args(argc, argv);
 349         if (ret < 0)
 350                 rte_exit(EXIT_FAILURE, "Invalid arguments\n");
 351
 352         nb_ports = rte_eth_dev_count_avail();
 353
 354         if (nb_ports > 0) {
 355                 mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
 356                                 NUM_MBUFS * nb_ports, MBUF_CACHE_SIZE, 0,
 357                                 RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
 358
 359                 if (mbuf_pool == NULL)
 360                         rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
 361
 362                 /* Initialize ports. */
 363                 RTE_ETH_FOREACH_DEV(portid) {
 364                         struct rte_ether_addr eth;
 365                         int w, j;
 366                         int ret;
 367
 368                         if ((enabled_port_mask & (1 << portid)) == 0)
 369                                 continue;
 370
 371                         eth.addr_bytes[0] = 0xe0;
 372                         eth.addr_bytes[1] = 0xe0;
 373                         eth.addr_bytes[2] = 0xe0;
 374                         eth.addr_bytes[3] = 0xe0;
 375                         eth.addr_bytes[4] = portid + 0xf0;
 376
 377                         if (port_init(portid, mbuf_pool) != 0)
 378                                 rte_exit(EXIT_FAILURE,
 379                                         "Cannot init port %"PRIu8 "\n",
 380                                         portid);
 381
 382                         for (w = 0; w < MAX_VFS; w++) {
 383                                 eth.addr_bytes[5] = w + 0xf0;
 384
 385                                 ret = -ENOTSUP;
 386 #ifdef RTE_LIBRTE_IXGBE_PMD
 387                                 ret = rte_pmd_ixgbe_set_vf_mac_addr(portid,
 388                                                         w, &eth);
 389 #endif
 390 #ifdef RTE_LIBRTE_I40E_PMD
 391                                 if (ret == -ENOTSUP)
 392                                         ret = rte_pmd_i40e_set_vf_mac_addr(
 393                                                         portid, w, &eth);
 394 #endif
 395 #ifdef RTE_LIBRTE_BNXT_PMD
 396                                 if (ret == -ENOTSUP)
 397                                         ret = rte_pmd_bnxt_set_vf_mac_addr(
 398                                                         portid, w, &eth);
 399 #endif
 400
 401                                 switch (ret) {
 402                                 case 0:
 403                                         printf("Port %d VF %d MAC: ",
 404                                                         portid, w);
 405                                         for (j = 0; j < 5; j++) {
 406                                                 printf("%02x:",
 407                                                         eth.addr_bytes[j]);
 408                                         }
 409                                         printf("%02x\n", eth.addr_bytes[5]);
 410                                         break;
 411                                 }
 412                                 printf("\n");
 413                         }
 414                 }
 415         }
 416
 417         check_all_ports_link_status(enabled_port_mask);
 418
 419         lcore_id = rte_get_next_lcore(-1, 1, 0);
 420         if (lcore_id == RTE_MAX_LCORE) {
 421                 RTE_LOG(ERR, EAL, "A minimum of three cores are required to run "
 422                                 "application\n");
 423                 return 0;
 424         }
 425         printf("Running channel monitor on lcore id %d\n", lcore_id);
 426         rte_eal_remote_launch(run_monitor, NULL, lcore_id);
 427
 428         lcore_id = rte_get_next_lcore(lcore_id, 1, 0);
 429         if (lcore_id == RTE_MAX_LCORE) {
 430                 RTE_LOG(ERR, EAL, "A minimum of three cores are required to run "
 431                                 "application\n");
 432                 return 0;
 433         }
 434         if (power_manager_init() < 0) {
 435                 printf("Unable to initialize power manager\n");
 436                 return -1;
 437         }
 438         if (channel_manager_init(CHANNEL_MGR_DEFAULT_HV_PATH) < 0) {
 439                 printf("Unable to initialize channel manager\n");
 440                 return -1;
 441         }
 442
 443         add_host_channels();
 444
 445         printf("Running core monitor on lcore id %d\n", lcore_id);
 446         rte_eal_remote_launch(run_core_monitor, NULL, lcore_id);
 447
 448         run_cli(NULL);
 449
 450         branch_monitor_exit();
 451
 452         rte_eal_mp_wait_lcore();
 453
 454         free(ci->cd);
 455
 456         return 0;
 457 }