+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "drop action not supported for "
+ "egress");
+ return 0;
+}
+
+/*
+ * Validate the queue action.
+ *
+ * @param[in] action
+ * Pointer to the queue action.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attr
+ * Attributes of flow that includes this action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_action_queue(const struct rte_flow_action *action,
+ uint64_t action_flags,
+ struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ const struct rte_flow_action_queue *queue = action->conf;
+
+ if (action_flags & MLX5_FLOW_FATE_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions in"
+ " same flow");
+ if (!priv->rxqs_n)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL, "No Rx queues configured");
+ if (queue->index >= priv->rxqs_n)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &queue->index,
+ "queue index out of range");
+ if (!(*priv->rxqs)[queue->index])
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &queue->index,
+ "queue is not configured");
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "queue action not supported for "
+ "egress");
+ return 0;
+}
+
+/*
+ * Validate the rss action.
+ *
+ * @param[in] action
+ * Pointer to the queue action.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attr
+ * Attributes of flow that includes this action.
+ * @param[in] item_flags
+ * Items that were detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_action_rss(const struct rte_flow_action *action,
+ uint64_t action_flags,
+ struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ const struct rte_flow_action_rss *rss = action->conf;
+ int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ unsigned int i;
+
+ if (action_flags & MLX5_FLOW_FATE_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions"
+ " in same flow");
+ if (rss->func != RTE_ETH_HASH_FUNCTION_DEFAULT &&
+ rss->func != RTE_ETH_HASH_FUNCTION_TOEPLITZ)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->func,
+ "RSS hash function not supported");
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ if (rss->level > 2)
+#else
+ if (rss->level > 1)
+#endif
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->level,
+ "tunnel RSS is not supported");
+ /* allow RSS key_len 0 in case of NULL (default) RSS key. */
+ if (rss->key_len == 0 && rss->key != NULL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key length 0");
+ if (rss->key_len > 0 && rss->key_len < MLX5_RSS_HASH_KEY_LEN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key too small");
+ if (rss->key_len > MLX5_RSS_HASH_KEY_LEN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key too large");
+ if (rss->queue_num > priv->config.ind_table_max_size)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue_num,
+ "number of queues too large");
+ if (rss->types & MLX5_RSS_HF_MASK)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->types,
+ "some RSS protocols are not"
+ " supported");
+ if (!priv->rxqs_n)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL, "No Rx queues configured");
+ if (!rss->queue_num)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL, "No queues configured");
+ for (i = 0; i != rss->queue_num; ++i) {
+ if (!(*priv->rxqs)[rss->queue[i]])
+ return rte_flow_error_set
+ (error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue[i], "queue is not configured");
+ }
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "rss action not supported for "
+ "egress");
+ if (rss->level > 1 && !tunnel)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
+ "inner RSS is not supported for "
+ "non-tunnel flows");
+ return 0;
+}
+
+/*
+ * Validate the count action.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attr
+ * Attributes of flow that includes this action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_action_count(struct rte_eth_dev *dev __rte_unused,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "count action not supported for "
+ "egress");
+ return 0;
+}
+
+/**
+ * Verify the @p attributes will be correctly understood by the NIC and store
+ * them in the @p flow if everything is correct.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attributes
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_attributes(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attributes,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint32_t priority_max = priv->config.flow_prio - 1;
+
+ if (attributes->group)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ NULL, "groups is not supported");
+ if (attributes->priority != MLX5_FLOW_PRIO_RSVD &&
+ attributes->priority >= priority_max)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ NULL, "priority out of range");
+ if (attributes->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "egress is not supported");
+ if (attributes->transfer)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
+ NULL, "transfer is not supported");
+ if (!attributes->ingress)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "ingress attribute is mandatory");
+ return 0;
+}
+
+/**
+ * Validate Ethernet item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_eth(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_eth *mask = item->mask;
+ const struct rte_flow_item_eth nic_mask = {
+ .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .type = RTE_BE16(0xffff),
+ };
+ int ret;
+ int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t ethm = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
+ MLX5_FLOW_LAYER_OUTER_L2;
+
+ if (item_flags & ethm)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L2 layers not supported");
+ if (!mask)
+ mask = &rte_flow_item_eth_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_eth),
+ error);
+ return ret;
+}
+
+/**
+ * Validate VLAN item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_vlan(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_vlan *spec = item->spec;
+ const struct rte_flow_item_vlan *mask = item->mask;
+ const struct rte_flow_item_vlan nic_mask = {
+ .tci = RTE_BE16(0x0fff),
+ .inner_type = RTE_BE16(0xffff),
+ };
+ uint16_t vlan_tag = 0;
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int ret;
+ const uint64_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
+ MLX5_FLOW_LAYER_INNER_L4) :
+ (MLX5_FLOW_LAYER_OUTER_L3 |
+ MLX5_FLOW_LAYER_OUTER_L4);
+ const uint64_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
+ MLX5_FLOW_LAYER_OUTER_VLAN;
+
+ if (item_flags & vlanm)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple VLAN layers not supported");
+ else if ((item_flags & l34m) != 0)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L2 layer cannot follow L3/L4 layer");
+ if (!mask)
+ mask = &rte_flow_item_vlan_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_vlan),
+ error);
+ if (ret)
+ return ret;
+ if (spec) {
+ vlan_tag = spec->tci;
+ vlan_tag &= mask->tci;
+ }
+ /*
+ * From verbs perspective an empty VLAN is equivalent
+ * to a packet without VLAN layer.
+ */
+ if (!vlan_tag)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "VLAN cannot be empty");
+ return 0;
+}
+
+/**
+ * Validate IPV4 item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] acc_mask
+ * Acceptable mask, if NULL default internal default mask
+ * will be used to check whether item fields are supported.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_ipv4(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ const struct rte_flow_item_ipv4 *acc_mask,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv4 *mask = item->mask;
+ const struct rte_flow_item_ipv4 nic_mask = {
+ .hdr = {
+ .src_addr = RTE_BE32(0xffffffff),
+ .dst_addr = RTE_BE32(0xffffffff),
+ .type_of_service = 0xff,
+ .next_proto_id = 0xff,
+ },
+ };
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3;
+ const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4;
+ int ret;
+
+ if (item_flags & l3m)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L3 layers not supported");
+ else if (item_flags & l4m)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 cannot follow an L4 layer.");
+ if (!mask)
+ mask = &rte_flow_item_ipv4_mask;
+ else if (mask->hdr.next_proto_id != 0 &&
+ mask->hdr.next_proto_id != 0xff)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "partial mask is not supported"
+ " for protocol");
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ acc_mask ? (const uint8_t *)acc_mask
+ : (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_ipv4),
+ error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Validate IPV6 item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] acc_mask
+ * Acceptable mask, if NULL default internal default mask
+ * will be used to check whether item fields are supported.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_ipv6(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ const struct rte_flow_item_ipv6 *acc_mask,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv6 *mask = item->mask;
+ const struct rte_flow_item_ipv6 nic_mask = {
+ .hdr = {
+ .src_addr =
+ "\xff\xff\xff\xff\xff\xff\xff\xff"
+ "\xff\xff\xff\xff\xff\xff\xff\xff",
+ .dst_addr =
+ "\xff\xff\xff\xff\xff\xff\xff\xff"
+ "\xff\xff\xff\xff\xff\xff\xff\xff",
+ .vtc_flow = RTE_BE32(0xffffffff),
+ .proto = 0xff,
+ .hop_limits = 0xff,
+ },
+ };
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3;
+ const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4;
+ int ret;
+
+ if (item_flags & l3m)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L3 layers not supported");
+ else if (item_flags & l4m)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 cannot follow an L4 layer.");
+ if (!mask)
+ mask = &rte_flow_item_ipv6_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ acc_mask ? (const uint8_t *)acc_mask
+ : (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_ipv6),
+ error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Validate UDP item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[in] flow_mask
+ * mlx5 flow-specific (TCF, DV, verbs, etc.) supported header fields mask.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_udp(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_udp *mask = item->mask;
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3;
+ const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4;
+ int ret;
+
+ if (target_protocol != 0xff && target_protocol != IPPROTO_UDP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with UDP layer");
+ if (!(item_flags & l3m))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 is mandatory to filter on L4");
+ if (item_flags & l4m)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L4 layers not supported");
+ if (!mask)
+ mask = &rte_flow_item_udp_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_udp_mask,
+ sizeof(struct rte_flow_item_udp), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Validate TCP item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_tcp(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ const struct rte_flow_item_tcp *flow_mask,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_tcp *mask = item->mask;
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3;
+ const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4;
+ int ret;
+
+ assert(flow_mask);
+ if (target_protocol != 0xff && target_protocol != IPPROTO_TCP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with TCP layer");
+ if (!(item_flags & l3m))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 is mandatory to filter on L4");
+ if (item_flags & l4m)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L4 layers not supported");
+ if (!mask)
+ mask = &rte_flow_item_tcp_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)flow_mask,
+ sizeof(struct rte_flow_item_tcp), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Validate VXLAN item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_vxlan(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_vxlan *spec = item->spec;
+ const struct rte_flow_item_vxlan *mask = item->mask;
+ int ret;
+ union vni {
+ uint32_t vlan_id;
+ uint8_t vni[4];
+ } id = { .vlan_id = 0, };
+ uint32_t vlan_id = 0;
+
+
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple tunnel layers not"
+ " supported");
+ /*
+ * Verify only UDPv4 is present as defined in
+ * https://tools.ietf.org/html/rfc7348
+ */
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "no outer UDP layer found");
+ if (!mask)
+ mask = &rte_flow_item_vxlan_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_vxlan_mask,
+ sizeof(struct rte_flow_item_vxlan),
+ error);
+ if (ret < 0)
+ return ret;
+ if (spec) {
+ memcpy(&id.vni[1], spec->vni, 3);
+ vlan_id = id.vlan_id;
+ memcpy(&id.vni[1], mask->vni, 3);
+ vlan_id &= id.vlan_id;
+ }
+ /*
+ * Tunnel id 0 is equivalent as not adding a VXLAN layer, if
+ * only this layer is defined in the Verbs specification it is
+ * interpreted as wildcard and all packets will match this
+ * rule, if it follows a full stack layer (ex: eth / ipv4 /
+ * udp), all packets matching the layers before will also
+ * match this rule. To avoid such situation, VNI 0 is
+ * currently refused.
+ */
+ if (!vlan_id)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VXLAN vni cannot be 0");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VXLAN tunnel must be fully defined");
+ return 0;
+}
+
+/**
+ * Validate VXLAN_GPE item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] priv
+ * Pointer to the private data structure.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_vxlan_gpe(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ const struct rte_flow_item_vxlan_gpe *spec = item->spec;
+ const struct rte_flow_item_vxlan_gpe *mask = item->mask;
+ int ret;
+ union vni {
+ uint32_t vlan_id;
+ uint8_t vni[4];
+ } id = { .vlan_id = 0, };
+ uint32_t vlan_id = 0;
+
+ if (!priv->config.l3_vxlan_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 VXLAN is not enabled by device"
+ " parameter and/or not configured in"
+ " firmware");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple tunnel layers not"
+ " supported");
+ /*
+ * Verify only UDPv4 is present as defined in
+ * https://tools.ietf.org/html/rfc7348
+ */
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "no outer UDP layer found");
+ if (!mask)
+ mask = &rte_flow_item_vxlan_gpe_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_vxlan_gpe_mask,
+ sizeof(struct rte_flow_item_vxlan_gpe),
+ error);
+ if (ret < 0)
+ return ret;
+ if (spec) {
+ if (spec->protocol)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VxLAN-GPE protocol"
+ " not supported");
+ memcpy(&id.vni[1], spec->vni, 3);
+ vlan_id = id.vlan_id;
+ memcpy(&id.vni[1], mask->vni, 3);
+ vlan_id &= id.vlan_id;
+ }
+ /*
+ * Tunnel id 0 is equivalent as not adding a VXLAN layer, if only this
+ * layer is defined in the Verbs specification it is interpreted as
+ * wildcard and all packets will match this rule, if it follows a full
+ * stack layer (ex: eth / ipv4 / udp), all packets matching the layers
+ * before will also match this rule. To avoid such situation, VNI 0
+ * is currently refused.
+ */
+ if (!vlan_id)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VXLAN-GPE vni cannot be 0");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VXLAN-GPE tunnel must be fully"
+ " defined");
+ return 0;
+}
+
+/**
+ * Validate GRE item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit flags to mark detected items.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_gre(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_gre *spec __rte_unused = item->spec;
+ const struct rte_flow_item_gre *mask = item->mask;
+ int ret;
+
+ if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with this GRE layer");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple tunnel layers not"
+ " supported");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 Layer is missing");
+ if (!mask)
+ mask = &rte_flow_item_gre_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_gre_mask,
+ sizeof(struct rte_flow_item_gre), error);
+ if (ret < 0)
+ return ret;
+#ifndef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ if (spec && (spec->protocol & mask->protocol))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "without MPLS support the"
+ " specification cannot be used for"
+ " filtering");
+#endif
+ return 0;
+}
+
+/**
+ * Validate MPLS item.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] prev_layer
+ * The protocol layer indicated in previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_mpls(struct rte_eth_dev *dev __rte_unused,
+ const struct rte_flow_item *item __rte_unused,
+ uint64_t item_flags __rte_unused,
+ uint64_t prev_layer __rte_unused,
+ struct rte_flow_error *error)
+{
+#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ const struct rte_flow_item_mpls *mask = item->mask;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ int ret;
+
+ if (!priv->config.mpls_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "MPLS not supported or"
+ " disabled in firmware"
+ " configuration.");
+ /* MPLS over IP, UDP, GRE is allowed */
+ if (!(prev_layer & (MLX5_FLOW_LAYER_OUTER_L3 |
+ MLX5_FLOW_LAYER_OUTER_L4_UDP |
+ MLX5_FLOW_LAYER_GRE)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with MPLS layer");
+ /* Multi-tunnel isn't allowed but MPLS over GRE is an exception. */
+ if ((item_flags & MLX5_FLOW_LAYER_TUNNEL) &&
+ !(item_flags & MLX5_FLOW_LAYER_GRE))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple tunnel layers not"
+ " supported");
+ if (!mask)
+ mask = &rte_flow_item_mpls_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_mpls_mask,
+ sizeof(struct rte_flow_item_mpls), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+#endif
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "MPLS is not supported by Verbs, please"
+ " update.");
+}
+
+static int
+flow_null_validate(struct rte_eth_dev *dev __rte_unused,
+ const struct rte_flow_attr *attr __rte_unused,
+ const struct rte_flow_item items[] __rte_unused,
+ const struct rte_flow_action actions[] __rte_unused,
+ struct rte_flow_error *error __rte_unused)
+{
+ rte_errno = ENOTSUP;
+ return -rte_errno;
+}
+
+static struct mlx5_flow *
+flow_null_prepare(const struct rte_flow_attr *attr __rte_unused,
+ const struct rte_flow_item items[] __rte_unused,
+ const struct rte_flow_action actions[] __rte_unused,
+ struct rte_flow_error *error __rte_unused)
+{
+ rte_errno = ENOTSUP;
+ return NULL;
+}
+
+static int
+flow_null_translate(struct rte_eth_dev *dev __rte_unused,
+ struct mlx5_flow *dev_flow __rte_unused,
+ const struct rte_flow_attr *attr __rte_unused,
+ const struct rte_flow_item items[] __rte_unused,
+ const struct rte_flow_action actions[] __rte_unused,
+ struct rte_flow_error *error __rte_unused)
+{
+ rte_errno = ENOTSUP;
+ return -rte_errno;
+}
+
+static int
+flow_null_apply(struct rte_eth_dev *dev __rte_unused,
+ struct rte_flow *flow __rte_unused,
+ struct rte_flow_error *error __rte_unused)
+{
+ rte_errno = ENOTSUP;
+ return -rte_errno;
+}
+
+static void
+flow_null_remove(struct rte_eth_dev *dev __rte_unused,
+ struct rte_flow *flow __rte_unused)
+{
+}
+
+static void
+flow_null_destroy(struct rte_eth_dev *dev __rte_unused,
+ struct rte_flow *flow __rte_unused)
+{
+}
+
+static int
+flow_null_query(struct rte_eth_dev *dev __rte_unused,
+ struct rte_flow *flow __rte_unused,
+ const struct rte_flow_action *actions __rte_unused,
+ void *data __rte_unused,
+ struct rte_flow_error *error __rte_unused)
+{
+ rte_errno = ENOTSUP;
+ return -rte_errno;
+}
+
+/* Void driver to protect from null pointer reference. */
+const struct mlx5_flow_driver_ops mlx5_flow_null_drv_ops = {
+ .validate = flow_null_validate,
+ .prepare = flow_null_prepare,
+ .translate = flow_null_translate,
+ .apply = flow_null_apply,
+ .remove = flow_null_remove,
+ .destroy = flow_null_destroy,
+ .query = flow_null_query,
+};
+
+/**
+ * Select flow driver type according to flow attributes and device
+ * configuration.
+ *
+ * @param[in] dev
+ * Pointer to the dev structure.
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ *
+ * @return
+ * flow driver type, MLX5_FLOW_TYPE_MAX otherwise.
+ */
+static enum mlx5_flow_drv_type
+flow_get_drv_type(struct rte_eth_dev *dev, const struct rte_flow_attr *attr)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ enum mlx5_flow_drv_type type = MLX5_FLOW_TYPE_MAX;
+
+ if (attr->transfer && !priv->config.dv_esw_en)
+ type = MLX5_FLOW_TYPE_TCF;
+ else
+ type = priv->config.dv_flow_en ? MLX5_FLOW_TYPE_DV :
+ MLX5_FLOW_TYPE_VERBS;
+ return type;
+}
+
+#define flow_get_drv_ops(type) flow_drv_ops[type]
+
+/**
+ * Flow driver validation API. This abstracts calling driver specific functions.
+ * The type of flow driver is determined according to flow attributes.
+ *
+ * @param[in] dev
+ * Pointer to the dev structure.
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ * @param[in] items
+ * Pointer to the list of items.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static inline int
+flow_drv_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ const struct mlx5_flow_driver_ops *fops;
+ enum mlx5_flow_drv_type type = flow_get_drv_type(dev, attr);
+
+ fops = flow_get_drv_ops(type);
+ return fops->validate(dev, attr, items, actions, error);