static struct rte_cryptodev_sym_session *
test_perf_create_snow3g_session(uint8_t dev_id, enum chain_mode chain,
- enum rte_crypto_cipher_algorithm cipher_algo, unsigned cipher_key_len,
+ enum rte_crypto_cipher_algorithm cipher_algo,
+ unsigned int cipher_key_len,
+ enum rte_crypto_auth_algorithm auth_algo);
+static struct rte_cryptodev_sym_session *
+test_perf_create_libcrypto_session(uint8_t dev_id, enum chain_mode chain,
+ enum rte_crypto_cipher_algorithm cipher_algo,
+ unsigned int cipher_key_len,
enum rte_crypto_auth_algorithm auth_algo);
static struct rte_mbuf *
test_perf_create_pktmbuf(struct rte_mempool *mpool, unsigned buf_sz);
test_perf_set_crypto_op_snow3g(struct rte_crypto_op *op, struct rte_mbuf *m,
struct rte_cryptodev_sym_session *sess, unsigned data_len,
unsigned digest_len);
+static inline struct rte_crypto_op *
+test_perf_set_crypto_op_aes(struct rte_crypto_op *op, struct rte_mbuf *m,
+ struct rte_cryptodev_sym_session *sess, unsigned int data_len,
+ unsigned int digest_len);
+static inline struct rte_crypto_op *
+test_perf_set_crypto_op_aes_gcm(struct rte_crypto_op *op, struct rte_mbuf *m,
+ struct rte_cryptodev_sym_session *sess, unsigned int data_len,
+ unsigned int digest_len);
+static inline struct rte_crypto_op *
+test_perf_set_crypto_op_3des(struct rte_crypto_op *op, struct rte_mbuf *m,
+ struct rte_cryptodev_sym_session *sess, unsigned int data_len,
+ unsigned int digest_len);
static uint32_t get_auth_digest_length(enum rte_crypto_auth_algorithm algo);
}
}
+ /* Create 2 LIBCRYPTO devices if required */
+ if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_LIBCRYPTO_PMD) {
+#ifndef RTE_LIBRTE_PMD_LIBCRYPTO
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
+ nb_devs = rte_cryptodev_count_devtype(
+ RTE_CRYPTODEV_LIBCRYPTO_PMD);
+ if (nb_devs < 2) {
+ for (i = nb_devs; i < 2; i++) {
+ ret = rte_eal_vdev_init(
+ RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD),
+ NULL);
+
+ TEST_ASSERT(ret == 0, "Failed to create "
+ "instance %u of pmd : %s", i,
+ RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD));
+ }
+ }
+ }
+
#ifndef RTE_LIBRTE_PMD_QAT
if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_QAT_SYM_PMD) {
RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled "
nb_devs = rte_cryptodev_count();
if (nb_devs < 1) {
- RTE_LOG(ERR, USER1, "No crypto devices found?");
+ RTE_LOG(ERR, USER1, "No crypto devices found?\n");
return TEST_FAILED;
}
return 0;
}
+static int
+test_perf_libcrypto_optimise_cyclecount(struct perf_test_params *pparams)
+{
+ uint32_t num_to_submit = pparams->total_operations;
+ struct rte_crypto_op *c_ops[num_to_submit];
+ struct rte_crypto_op *proc_ops[num_to_submit];
+ uint64_t failed_polls, retries, start_cycles,
+ end_cycles, total_cycles = 0;
+ uint32_t burst_sent = 0, burst_received = 0;
+ uint32_t i, burst_size, num_sent, num_ops_received;
+
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+ static struct rte_cryptodev_sym_session *sess;
+
+ static struct rte_crypto_op *(*test_perf_set_crypto_op)
+ (struct rte_crypto_op *, struct rte_mbuf *,
+ struct rte_cryptodev_sym_session *,
+ unsigned int, unsigned int);
+
+ unsigned int digest_length = get_auth_digest_length(pparams->auth_algo);
+
+ if (rte_cryptodev_count() == 0) {
+ printf("\nNo crypto devices found. Is PMD build configured?\n");
+ return TEST_FAILED;
+ }
+
+ /* Create Crypto session*/
+ sess = test_perf_create_libcrypto_session(ts_params->dev_id,
+ pparams->chain, pparams->cipher_algo,
+ pparams->cipher_key_length, pparams->auth_algo);
+ TEST_ASSERT_NOT_NULL(sess, "Session creation failed");
+
+ /* Generate Crypto op data structure(s)*/
+ for (i = 0; i < num_to_submit ; i++) {
+ struct rte_mbuf *m = test_perf_create_pktmbuf(
+ ts_params->mbuf_mp,
+ pparams->buf_size);
+ TEST_ASSERT_NOT_NULL(m, "Failed to allocate tx_buf");
+
+ struct rte_crypto_op *op =
+ rte_crypto_op_alloc(ts_params->op_mpool,
+ RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+ TEST_ASSERT_NOT_NULL(op, "Failed to allocate op");
+
+ switch (pparams->cipher_algo) {
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ case RTE_CRYPTO_CIPHER_3DES_CTR:
+ test_perf_set_crypto_op = test_perf_set_crypto_op_3des;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ test_perf_set_crypto_op = test_perf_set_crypto_op_aes;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_GCM:
+ test_perf_set_crypto_op =
+ test_perf_set_crypto_op_aes_gcm;
+ break;
+ default:
+ return TEST_FAILED;
+ }
+
+ op = test_perf_set_crypto_op(op, m, sess, pparams->buf_size,
+ digest_length);
+ TEST_ASSERT_NOT_NULL(op, "Failed to attach op to session");
+
+ c_ops[i] = op;
+ }
+
+ printf("\nOn %s dev%u qp%u, %s, cipher algo:%s, cipher key length:%u, "
+ "auth_algo:%s, Packet Size %u bytes",
+ pmd_name(gbl_cryptodev_perftest_devtype),
+ ts_params->dev_id, 0,
+ chain_mode_name(pparams->chain),
+ cipher_algo_name(pparams->cipher_algo),
+ pparams->cipher_key_length,
+ auth_algo_name(pparams->auth_algo),
+ pparams->buf_size);
+ printf("\nOps Tx\tOps Rx\tOps/burst ");
+ printf("Retries EmptyPolls\tIACycles/CyOp\tIACycles/Burst\t"
+ "IACycles/Byte");
+
+ for (i = 2; i <= 128 ; i *= 2) {
+ num_sent = 0;
+ num_ops_received = 0;
+ retries = 0;
+ failed_polls = 0;
+ burst_size = i;
+ total_cycles = 0;
+ while (num_sent < num_to_submit) {
+ start_cycles = rte_rdtsc_precise();
+ burst_sent = rte_cryptodev_enqueue_burst(
+ ts_params->dev_id,
+ 0, &c_ops[num_sent],
+ ((num_to_submit - num_sent) <
+ burst_size) ?
+ num_to_submit - num_sent : burst_size);
+ end_cycles = rte_rdtsc_precise();
+ if (burst_sent == 0)
+ retries++;
+ num_sent += burst_sent;
+ total_cycles += (end_cycles - start_cycles);
+
+ /* Wait until requests have been sent. */
+ rte_delay_ms(1);
+
+ start_cycles = rte_rdtsc_precise();
+ burst_received = rte_cryptodev_dequeue_burst(
+ ts_params->dev_id, 0, proc_ops,
+ burst_size);
+ end_cycles = rte_rdtsc_precise();
+ if (burst_received < burst_sent)
+ failed_polls++;
+ num_ops_received += burst_received;
+
+ total_cycles += end_cycles - start_cycles;
+ }
+
+ while (num_ops_received != num_to_submit) {
+ /* Sending 0 length burst to flush sw crypto device */
+ rte_cryptodev_enqueue_burst(ts_params->dev_id, 0,
+ NULL, 0);
+
+ start_cycles = rte_rdtsc_precise();
+ burst_received = rte_cryptodev_dequeue_burst(
+ ts_params->dev_id, 0, proc_ops,
+ burst_size);
+ end_cycles = rte_rdtsc_precise();
+
+ total_cycles += end_cycles - start_cycles;
+ if (burst_received == 0)
+ failed_polls++;
+ num_ops_received += burst_received;
+ }
+
+ printf("\n%u\t%u\t%u", num_sent, num_ops_received, burst_size);
+ printf("\t\t%"PRIu64, retries);
+ printf("\t%"PRIu64, failed_polls);
+ printf("\t\t%"PRIu64, total_cycles/num_ops_received);
+ printf("\t\t%"PRIu64, (total_cycles/num_ops_received) *
+ burst_size);
+ printf("\t\t%"PRIu64,
+ total_cycles /
+ (num_ops_received * pparams->buf_size));
+ }
+ printf("\n");
+
+ for (i = 0; i < num_to_submit ; i++) {
+ rte_pktmbuf_free(c_ops[i]->sym->m_src);
+ rte_crypto_op_free(c_ops[i]);
+ }
+
+ return TEST_SUCCESS;
+}
+
static uint32_t get_auth_key_max_length(enum rte_crypto_auth_algorithm algo)
{
switch (algo) {
return 128;
case RTE_CRYPTO_AUTH_SHA512_HMAC:
return 128;
+ case RTE_CRYPTO_AUTH_AES_GCM:
+ return 0;
default:
return 0;
}
return TRUNCATED_DIGEST_BYTE_LENGTH_SHA384;
case RTE_CRYPTO_AUTH_SHA512_HMAC:
return TRUNCATED_DIGEST_BYTE_LENGTH_SHA512;
+ case RTE_CRYPTO_AUTH_AES_GCM:
+ return DIGEST_BYTE_LENGTH_AES_GCM;
default:
return 0;
}
}
-static uint8_t aes_cbc_key[] = {
+static uint8_t aes_key[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
-static uint8_t aes_cbc_iv[] = {
+static uint8_t aes_iv[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
+static uint8_t triple_des_key[] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static uint8_t triple_des_iv[] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
static uint8_t hmac_sha_key[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
cipher_xform.cipher.algo = cipher_algo;
cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
- cipher_xform.cipher.key.data = aes_cbc_key;
+ cipher_xform.cipher.key.data = aes_key;
cipher_xform.cipher.key.length = cipher_key_len;
/* Setup HMAC Parameters */
}
}
-#define AES_CBC_BLOCK_SIZE 16
-#define AES_CBC_CIPHER_IV_LENGTH 16
+static struct rte_cryptodev_sym_session *
+test_perf_create_libcrypto_session(uint8_t dev_id, enum chain_mode chain,
+ enum rte_crypto_cipher_algorithm cipher_algo,
+ unsigned int cipher_key_len,
+ enum rte_crypto_auth_algorithm auth_algo)
+{
+ struct rte_crypto_sym_xform cipher_xform = { 0 };
+ struct rte_crypto_sym_xform auth_xform = { 0 };
+
+ /* Setup Cipher Parameters */
+ cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+ cipher_xform.cipher.algo = cipher_algo;
+ cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+
+ switch (cipher_algo) {
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ case RTE_CRYPTO_CIPHER_3DES_CTR:
+ cipher_xform.cipher.key.data = triple_des_key;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ case RTE_CRYPTO_CIPHER_AES_GCM:
+ cipher_xform.cipher.key.data = aes_key;
+ break;
+ default:
+ return NULL;
+ }
+
+ cipher_xform.cipher.key.length = cipher_key_len;
+
+ /* Setup Auth Parameters */
+ auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+ auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+ auth_xform.auth.algo = auth_algo;
+
+ switch (auth_algo) {
+ case RTE_CRYPTO_AUTH_SHA1_HMAC:
+ auth_xform.auth.key.data = hmac_sha_key;
+ break;
+ case RTE_CRYPTO_AUTH_AES_GCM:
+ auth_xform.auth.key.data = NULL;
+ break;
+ default:
+ return NULL;
+ }
+
+ auth_xform.auth.key.length = get_auth_key_max_length(auth_algo);
+ auth_xform.auth.digest_length = get_auth_digest_length(auth_algo);
+
+ switch (chain) {
+ case CIPHER_HASH:
+ cipher_xform.next = &auth_xform;
+ auth_xform.next = NULL;
+ /* Create Crypto session*/
+ return rte_cryptodev_sym_session_create(dev_id, &cipher_xform);
+ case HASH_CIPHER:
+ auth_xform.next = &cipher_xform;
+ cipher_xform.next = NULL;
+ /* Create Crypto session*/
+ return rte_cryptodev_sym_session_create(dev_id, &auth_xform);
+ default:
+ return NULL;
+ }
+}
+
+#define AES_BLOCK_SIZE 16
+#define AES_CIPHER_IV_LENGTH 16
+
+#define TRIPLE_DES_BLOCK_SIZE 8
+#define TRIPLE_DES_CIPHER_IV_LENGTH 8
+
#define SNOW3G_CIPHER_IV_LENGTH 16
static struct rte_mbuf *
}
static inline struct rte_crypto_op *
-test_perf_set_crypto_op(struct rte_crypto_op *op, struct rte_mbuf *m,
+test_perf_set_crypto_op_aes(struct rte_crypto_op *op, struct rte_mbuf *m,
struct rte_cryptodev_sym_session *sess, unsigned data_len,
unsigned digest_len)
{
(m->data_off + data_len);
op->sym->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(m, data_len);
op->sym->auth.digest.length = digest_len;
- op->sym->auth.aad.data = aes_cbc_iv;
- op->sym->auth.aad.length = AES_CBC_CIPHER_IV_LENGTH;
+ op->sym->auth.aad.data = aes_iv;
+ op->sym->auth.aad.length = AES_CIPHER_IV_LENGTH;
/* Cipher Parameters */
- op->sym->cipher.iv.data = aes_cbc_iv;
- op->sym->cipher.iv.length = AES_CBC_CIPHER_IV_LENGTH;
+ op->sym->cipher.iv.data = aes_iv;
+ op->sym->cipher.iv.length = AES_CIPHER_IV_LENGTH;
/* Data lengths/offsets Parameters */
op->sym->auth.data.offset = 0;
op->sym->auth.data.length = data_len;
- op->sym->cipher.data.offset = AES_CBC_BLOCK_SIZE;
- op->sym->cipher.data.length = data_len - AES_CBC_BLOCK_SIZE;
+ op->sym->cipher.data.offset = AES_BLOCK_SIZE;
+ op->sym->cipher.data.length = data_len - AES_BLOCK_SIZE;
+
+ op->sym->m_src = m;
+
+ return op;
+}
+
+static inline struct rte_crypto_op *
+test_perf_set_crypto_op_aes_gcm(struct rte_crypto_op *op, struct rte_mbuf *m,
+ struct rte_cryptodev_sym_session *sess, unsigned int data_len,
+ unsigned int digest_len)
+{
+ if (rte_crypto_op_attach_sym_session(op, sess) != 0) {
+ rte_crypto_op_free(op);
+ return NULL;
+ }
+
+ /* Authentication Parameters */
+ op->sym->auth.digest.data = (uint8_t *)m->buf_addr +
+ (m->data_off + data_len);
+ op->sym->auth.digest.phys_addr =
+ rte_pktmbuf_mtophys_offset(m, data_len);
+ op->sym->auth.digest.length = digest_len;
+ op->sym->auth.aad.data = aes_iv;
+ op->sym->auth.aad.length = AES_CIPHER_IV_LENGTH;
+
+ /* Cipher Parameters */
+ op->sym->cipher.iv.data = aes_iv;
+ op->sym->cipher.iv.length = AES_CIPHER_IV_LENGTH;
+
+ /* Data lengths/offsets Parameters */
+ op->sym->auth.data.offset = AES_BLOCK_SIZE;
+ op->sym->auth.data.length = data_len - AES_BLOCK_SIZE;
+
+ op->sym->cipher.data.offset = AES_BLOCK_SIZE;
+ op->sym->cipher.data.length = data_len - AES_BLOCK_SIZE;
op->sym->m_src = m;
/* Authentication Parameters */
op->sym->auth.digest.data = (uint8_t *)m->buf_addr +
(m->data_off + data_len);
- op->sym->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(m, data_len);
+ op->sym->auth.digest.phys_addr =
+ rte_pktmbuf_mtophys_offset(m, data_len);
op->sym->auth.digest.length = digest_len;
op->sym->auth.aad.data = snow3g_iv;
op->sym->auth.aad.length = SNOW3G_CIPHER_IV_LENGTH;
return op;
}
+static inline struct rte_crypto_op *
+test_perf_set_crypto_op_3des(struct rte_crypto_op *op, struct rte_mbuf *m,
+ struct rte_cryptodev_sym_session *sess, unsigned int data_len,
+ unsigned int digest_len)
+{
+ if (rte_crypto_op_attach_sym_session(op, sess) != 0) {
+ rte_crypto_op_free(op);
+ return NULL;
+ }
+
+ /* Authentication Parameters */
+ op->sym->auth.digest.data = (uint8_t *)m->buf_addr +
+ (m->data_off + data_len);
+ op->sym->auth.digest.phys_addr =
+ rte_pktmbuf_mtophys_offset(m, data_len);
+ op->sym->auth.digest.length = digest_len;
+ op->sym->auth.aad.data = triple_des_iv;
+ op->sym->auth.aad.length = TRIPLE_DES_CIPHER_IV_LENGTH;
+
+ /* Cipher Parameters */
+ op->sym->cipher.iv.data = triple_des_iv;
+ op->sym->cipher.iv.length = TRIPLE_DES_CIPHER_IV_LENGTH;
+
+ /* Data lengths/offsets Parameters */
+ op->sym->auth.data.offset = 0;
+ op->sym->auth.data.length = data_len;
+
+ op->sym->cipher.data.offset = TRIPLE_DES_BLOCK_SIZE;
+ op->sym->cipher.data.length = data_len - TRIPLE_DES_BLOCK_SIZE;
+
+ op->sym->m_src = m;
+ return op;
+}
/* An mbuf set is used in each burst. An mbuf can be used by multiple bursts at
* same time, i.e. as they're not dereferenced there's no need to wait until
"and free ops below.");
} else {
for (i = 0; i < ops_needed; i++)
- ops[i] = test_perf_set_crypto_op(ops[i],
+ ops[i] = test_perf_set_crypto_op_aes(ops[i],
mbufs[i + (pparams->burst_size *
(j % NUM_MBUF_SETS))],
sess, pparams->buf_size, digest_length);
return TEST_SUCCESS;
}
+static int
+test_perf_libcrypto(uint8_t dev_id, uint16_t queue_id,
+ struct perf_test_params *pparams)
+{
+ uint16_t i, k, l, m;
+ uint16_t j = 0;
+ uint16_t ops_unused = 0;
+
+ uint64_t burst_enqueued = 0, total_enqueued = 0, burst_dequeued = 0;
+ uint64_t processed = 0, failed_polls = 0, retries = 0;
+ uint64_t tsc_start = 0, tsc_end = 0;
+
+ unsigned int digest_length = get_auth_digest_length(pparams->auth_algo);
+
+ struct rte_crypto_op *ops[pparams->burst_size];
+ struct rte_crypto_op *proc_ops[pparams->burst_size];
+
+ struct rte_mbuf *mbufs[pparams->burst_size * NUM_MBUF_SETS];
+
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+ static struct rte_cryptodev_sym_session *sess;
+
+ static struct rte_crypto_op *(*test_perf_set_crypto_op)
+ (struct rte_crypto_op *, struct rte_mbuf *,
+ struct rte_cryptodev_sym_session *,
+ unsigned int, unsigned int);
+
+ switch (pparams->cipher_algo) {
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ case RTE_CRYPTO_CIPHER_3DES_CTR:
+ test_perf_set_crypto_op = test_perf_set_crypto_op_3des;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ test_perf_set_crypto_op = test_perf_set_crypto_op_aes;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_GCM:
+ test_perf_set_crypto_op = test_perf_set_crypto_op_aes_gcm;
+ break;
+ default:
+ return TEST_FAILED;
+ }
+
+ if (rte_cryptodev_count() == 0) {
+ printf("\nNo crypto devices found. Is PMD build configured?\n");
+ return TEST_FAILED;
+ }
+
+ /* Create Crypto session*/
+ sess = test_perf_create_libcrypto_session(ts_params->dev_id,
+ pparams->chain, pparams->cipher_algo,
+ pparams->cipher_key_length, pparams->auth_algo);
+ TEST_ASSERT_NOT_NULL(sess, "Session creation failed");
+
+ /* Generate a burst of crypto operations */
+ for (i = 0; i < (pparams->burst_size * NUM_MBUF_SETS); i++) {
+ mbufs[i] = test_perf_create_pktmbuf(
+ ts_params->mbuf_mp,
+ pparams->buf_size);
+
+ if (mbufs[i] == NULL) {
+ printf("\nFailed to get mbuf - freeing the rest.\n");
+ for (k = 0; k < i; k++)
+ rte_pktmbuf_free(mbufs[k]);
+ return -1;
+ }
+ }
+
+ tsc_start = rte_rdtsc_precise();
+
+ while (total_enqueued < pparams->total_operations) {
+ uint16_t burst_size =
+ total_enqueued + pparams->burst_size <=
+ pparams->total_operations ? pparams->burst_size :
+ pparams->total_operations - total_enqueued;
+ uint16_t ops_needed = burst_size - ops_unused;
+
+ if (ops_needed != rte_crypto_op_bulk_alloc(ts_params->op_mpool,
+ RTE_CRYPTO_OP_TYPE_SYMMETRIC, ops, ops_needed)){
+ printf("\nFailed to alloc enough ops, finish dequeuing "
+ "and free ops below.");
+ } else {
+ for (i = 0; i < ops_needed; i++)
+ ops[i] = test_perf_set_crypto_op(ops[i],
+ mbufs[i + (pparams->burst_size *
+ (j % NUM_MBUF_SETS))],
+ sess, pparams->buf_size, digest_length);
+
+ /* enqueue burst */
+ burst_enqueued = rte_cryptodev_enqueue_burst(dev_id,
+ queue_id, ops, burst_size);
+
+ if (burst_enqueued < burst_size)
+ retries++;
+
+ ops_unused = burst_size - burst_enqueued;
+ total_enqueued += burst_enqueued;
+ }
+
+ /* dequeue burst */
+ burst_dequeued = rte_cryptodev_dequeue_burst(dev_id, queue_id,
+ proc_ops, pparams->burst_size);
+ if (burst_dequeued == 0)
+ failed_polls++;
+ else {
+ processed += burst_dequeued;
+
+ for (l = 0; l < burst_dequeued; l++)
+ rte_crypto_op_free(proc_ops[l]);
+ }
+ j++;
+ }
+
+ /* Dequeue any operations still in the crypto device */
+ while (processed < pparams->total_operations) {
+ /* Sending 0 length burst to flush sw crypto device */
+ rte_cryptodev_enqueue_burst(dev_id, queue_id, NULL, 0);
+
+ /* dequeue burst */
+ burst_dequeued = rte_cryptodev_dequeue_burst(dev_id, queue_id,
+ proc_ops, pparams->burst_size);
+ if (burst_dequeued == 0)
+ failed_polls++;
+ else {
+ processed += burst_dequeued;
+
+ for (m = 0; m < burst_dequeued; m++)
+ rte_crypto_op_free(proc_ops[m]);
+ }
+ }
+
+ tsc_end = rte_rdtsc_precise();
+
+ double ops_s = ((double)processed / (tsc_end - tsc_start))
+ * rte_get_tsc_hz();
+ double throughput = (ops_s * pparams->buf_size * NUM_MBUF_SETS)
+ / 1000000000;
+
+ printf("\t%u\t%6.2f\t%10.2f\t%8"PRIu64"\t%8"PRIu64, pparams->buf_size,
+ ops_s / 1000000, throughput, retries, failed_polls);
+
+ for (i = 0; i < pparams->burst_size * NUM_MBUF_SETS; i++)
+ rte_pktmbuf_free(mbufs[i]);
+
+ printf("\n");
+ return TEST_SUCCESS;
+}
+
/*
perf_test_aes_sha("avx2", HASH_CIPHER, 16, CBC, SHA1);
return 0;
}
+static int
+test_perf_libcrypto_vary_pkt_size(void)
+{
+ unsigned int total_operations = 1000000;
+ unsigned int burst_size = { 64 };
+ unsigned int buf_lengths[] = { 64, 128, 256, 512, 768, 1024, 1280, 1536,
+ 1792, 2048 };
+ uint8_t i, j;
+
+ struct perf_test_params params_set[] = {
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key_length = 24,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .cipher_key_length = 32,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key_length = 24,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_GCM,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_AES_GCM
+ },
+ };
+
+ for (i = 0; i < RTE_DIM(params_set); i++) {
+ params_set[i].total_operations = total_operations;
+ params_set[i].burst_size = burst_size;
+ printf("\n%s. cipher algo: %s auth algo: %s cipher key size=%u."
+ " burst_size: %d ops\n",
+ chain_mode_name(params_set[i].chain),
+ cipher_algo_name(params_set[i].cipher_algo),
+ auth_algo_name(params_set[i].auth_algo),
+ params_set[i].cipher_key_length,
+ burst_size);
+ printf("\nBuffer Size(B)\tOPS(M)\tThroughput(Gbps)\tRetries\t"
+ "EmptyPolls\n");
+ for (j = 0; j < RTE_DIM(buf_lengths); j++) {
+ params_set[i].buf_size = buf_lengths[j];
+ test_perf_libcrypto(testsuite_params.dev_id, 0,
+ ¶ms_set[i]);
+ }
+ }
+
+ return 0;
+}
+
+static int
+test_perf_libcrypto_vary_burst_size(void)
+{
+ unsigned int total_operations = 4096;
+ uint16_t buf_lengths[] = { 40 };
+ uint8_t i, j;
+
+ struct perf_test_params params_set[] = {
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key_length = 24,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .cipher_key_length = 32,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key_length = 24,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_GCM,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_AES_GCM
+ },
+ };
+
+ printf("\n\nStart %s.", __func__);
+ printf("\nThis Test measures the average IA cycle cost using a "
+ "constant request(packet) size. ");
+ printf("Cycle cost is only valid when indicators show device is not"
+ " busy, i.e. Retries and EmptyPolls = 0");
+
+ for (i = 0; i < RTE_DIM(params_set); i++) {
+ printf("\n");
+ params_set[i].total_operations = total_operations;
+
+ for (j = 0; j < RTE_DIM(buf_lengths); j++) {
+ params_set[i].buf_size = buf_lengths[j];
+ test_perf_libcrypto_optimise_cyclecount(¶ms_set[i]);
+ }
+ }
+
+ return 0;
+}
+
static int
test_perf_aes_cbc_vary_burst_size(void)
{
}
};
+static struct unit_test_suite cryptodev_libcrypto_testsuite = {
+ .suite_name = "Crypto Device LIBCRYPTO Unit Test Suite",
+ .setup = testsuite_setup,
+ .teardown = testsuite_teardown,
+ .unit_test_cases = {
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_perf_libcrypto_vary_pkt_size),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_perf_libcrypto_vary_burst_size),
+ TEST_CASES_END() /**< NULL terminate unit test array */
+ }
+};
+
static int
perftest_aesni_gcm_cryptodev(void)
{
return unit_test_suite_runner(&cryptodev_snow3g_testsuite);
}
+static int
+perftest_libcrypto_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/)
+{
+ gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_LIBCRYPTO_PMD;
+
+ return unit_test_suite_runner(&cryptodev_libcrypto_testsuite);
+}
+
REGISTER_TEST_COMMAND(cryptodev_aesni_mb_perftest, perftest_aesni_mb_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_qat_perftest, perftest_qat_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_sw_snow3g_perftest, perftest_sw_snow3g_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_qat_snow3g_perftest, perftest_qat_snow3g_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_aesni_gcm_perftest, perftest_aesni_gcm_cryptodev);
+REGISTER_TEST_COMMAND(cryptodev_libcrypto_perftest,
+ perftest_libcrypto_cryptodev);
git.droids-corp.org / dpdk.git / blobdiff