#include <stdio.h>
#include <stdint.h>
#include <string.h>
-#include <termios.h>
#include <unistd.h>
#include <inttypes.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-
#include <sys/queue.h>
#include <rte_common.h>
"show port (port_id) fec_mode"
" Show fec mode of a port.\n\n"
+
+ "show port (port_id) flow_ctrl"
+ " Show flow control info of a port.\n\n"
);
}
"del port meter profile (port_id) (profile_id)\n"
" meter profile delete\n\n"
- "create port meter (port_id) (mtr_id) (profile_id) (meter_enable)\n"
- "(g_action) (y_action) (r_action) (stats_mask) (shared)\n"
- "(use_pre_meter_color) [(dscp_tbl_entry0) (dscp_tbl_entry1)...\n"
+ "create port meter (port_id) (mtr_id) (profile_id) (policy_id) (meter_enable)\n"
+ "(stats_mask) (shared) (use_pre_meter_color) [(dscp_tbl_entry0) (dscp_tbl_entry1)...\n"
"(dscp_tbl_entry63)]\n"
" meter create\n\n"
"del port meter (port_id) (mtr_id)\n"
" meter delete\n\n"
+ "add port meter policy (port_id) (policy_id) g_actions (actions)\n"
+ "y_actions (actions) r_actions (actions)\n"
+ " meter policy add\n\n"
+
+ "del port meter policy (port_id) (policy_id)\n"
+ " meter policy delete\n\n"
+
"set port meter profile (port_id) (mtr_id) (profile_id)\n"
" meter update meter profile\n\n"
" Register a dynf and Set/clear this flag on Tx. "
"Testpmd will set this value to any Tx packet "
"sent from this port\n\n"
+
+ "port cleanup (port_id) txq (queue_id) (free_cnt)\n"
+ " Cleanup txq mbufs for a specific Tx queue\n\n"
);
}
else if (!strcmp(res->name, "reset"))
reset_port(RTE_PORT_ALL);
else
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
}
cmdline_parse_token_string_t cmd_operate_port_all_cmd =
cmdline_parse_inst_t cmd_operate_port = {
.f = cmd_operate_port_parsed,
.data = NULL,
- .help_str = "port start|stop|close all: Start/Stop/Close/Reset all ports",
+ .help_str = "port start|stop|close|reset all: Start/Stop/Close/Reset all ports",
.tokens = {
(void *)&cmd_operate_port_all_cmd,
(void *)&cmd_operate_port_all_port,
else if (!strcmp(res->name, "reset"))
reset_port(res->value);
else
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
}
cmdline_parse_token_string_t cmd_operate_specific_port_cmd =
cmdline_parse_inst_t cmd_operate_specific_port = {
.f = cmd_operate_specific_port_parsed,
.data = NULL,
- .help_str = "port start|stop|close <port_id>: Start/Stop/Close/Reset port_id",
+ .help_str = "port start|stop|close
|reset <port_id>: Start/Stop/Close/Reset port_id",
.tokens = {
(void *)&cmd_operate_specific_port_cmd,
(void *)&cmd_operate_specific_port_port,
else if (strcmp(res->mode, "iterator") == 0)
setup_on_probe_event = false;
else
- printf("Unknown mode\n");
+ fprintf(stderr, "Unknown mode\n");
}
cmdline_parse_token_string_t cmd_set_port_setup_on_set =
if (!strcmp(res->keyword, "attach"))
attach_port(res->identifier);
else
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
}
cmdline_parse_token_string_t cmd_operate_attach_port_port =
RTE_ETH_VALID_PORTID_OR_RET(res->port_id);
detach_port_device(res->port_id);
} else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
}
}
if (!strcmp(res->keyword, "detach"))
detach_devargs(res->identifier);
else
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
}
cmdline_parse_token_string_t cmd_operate_detach_device_device =
} else if (!strcmp(duplexstr, "auto")) {
duplex = ETH_LINK_FULL_DUPLEX;
} else {
- printf("Unknown duplex parameter\n");
+ fprintf(stderr, "Unknown duplex parameter\n");
return -1;
}
ETH_LINK_SPEED_100M_HD : ETH_LINK_SPEED_100M;
} else {
if (duplex != ETH_LINK_FULL_DUPLEX) {
- printf("Invalid speed/duplex parameters\n");
+ fprintf(stderr, "Invalid speed/duplex parameters\n");
return -1;
}
if (!strcmp(speedstr, "1000")) {
} else if (!strcmp(speedstr, "auto")) {
*speed = ETH_LINK_SPEED_AUTONEG;
} else {
- printf("Unknown speed parameter\n");
+ fprintf(stderr, "Unknown speed parameter\n");
return -1;
}
}
portid_t pid;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
struct cmd_config_speed_specific *res = parsed_result;
uint32_t link_speed;
- if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ if (port_id_is_invalid(res->id, ENABLED_WARN))
return;
- }
- if (port_id_is_invalid(res->id, ENABLED_WARN))
+ if (!port_is_stopped(res->id)) {
+ fprintf(stderr, "Please stop port %d first\n", res->id);
return;
+ }
if (parse_and_check_speed_duplex(res->value1, res->value2,
&link_speed) < 0)
portid_t pid;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
return;
if (!port_is_stopped(res->port_id)) {
- printf("Please stop port %u first\n", res->port_id);
+ fprintf(stderr, "Please stop port %u first\n", res->port_id);
return;
}
struct cmd_config_rx_tx *res = parsed_result;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
if (!strcmp(res->name, "rxq")) {
if (!res->value && !nb_txq) {
- printf("Warning: Either rx or tx queues should be non zero\n");
+ fprintf(stderr, "Warning: Either rx or tx queues should be non zero\n");
return;
}
if (check_nb_rxq(res->value) != 0)
}
else if (!strcmp(res->name, "txq")) {
if (!res->value && !nb_rxq) {
- printf("Warning: Either rx or tx queues should be non zero\n");
+ fprintf(stderr, "Warning: Either rx or tx queues should be non zero\n");
return;
}
if (check_nb_txq(res->value) != 0)
nb_txd = res->value;
} else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
int ret;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
if (!strcmp(res->name, "max-pkt-len")) {
if (res->value < RTE_ETHER_MIN_LEN) {
- printf("max-pkt-len can not be less than %d\n",
- RTE_ETHER_MIN_LEN);
+ fprintf(stderr,
+ "max-pkt-len can not be less than %d\n",
+ RTE_ETHER_MIN_LEN);
return;
}
if (res->value == port->dev_conf.rxmode.max_rx_pkt_len)
ret = eth_dev_info_get_print_err(pid, &port->dev_info);
if (ret != 0) {
- printf("rte_eth_dev_info_get() failed for port %u\n",
+ fprintf(stderr,
+ "rte_eth_dev_info_get() failed for port %u\n",
pid);
return;
}
if (update_jumbo_frame_offload(pid) != 0)
port->dev_conf.rxmode.max_rx_pkt_len = max_rx_pkt_len_backup;
} else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
}
portid_t pid;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
port->dev_conf.rxmode.max_lro_pkt_size = res->value;
} else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
}
struct cmd_config_mtu_result *res = parsed_result;
if (res->value < RTE_ETHER_MIN_LEN) {
- printf("mtu cannot be less than %d\n", RTE_ETHER_MIN_LEN);
+ fprintf(stderr, "mtu cannot be less than %d\n", RTE_ETHER_MIN_LEN);
return;
}
port_mtu_set(res->port_id, res->value);
struct cmd_config_rx_mode_flag *res = parsed_result;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
else if (!strcmp(res->value, "off"))
rx_drop_en = 0;
else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
} else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
atoi(res->value) < 64)
rss_conf.rss_hf = 1ULL << atoi(res->value);
else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
rss_conf.rss_key = NULL;
diag = rte_eth_dev_rss_hash_update(i, &local_rss_conf);
if (diag < 0) {
all_updated = 0;
- printf("Configuration of RSS hash at ethernet port %d "
- "failed with error (%d): %s.\n",
+ fprintf(stderr,
+ "Configuration of RSS hash at ethernet port %d failed with error (%d): %s.\n",
i, -diag, strerror(-diag));
}
}
hexa_v = hexa_digit_to_value(key[idx]);
if (hexa_v == 0xFF)
- printf("invalid key: character %c at position %d is not a "
- "valid hexa digit\n", key[idx], idx);
+ fprintf(stderr,
+ "invalid key: character %c at position %d is not a valid hexa digit\n",
+ key[idx], idx);
return hexa_v;
}
dev_info.hash_key_size <= sizeof(hash_key))
hash_key_size = dev_info.hash_key_size;
else {
- printf("dev_info did not provide a valid hash key size\n");
+ fprintf(stderr,
+ "dev_info did not provide a valid hash key size\n");
return;
}
/* Check the length of the RSS hash key */
key_len = strlen(res->key);
if (key_len != (hash_key_size * 2)) {
- printf("key length: %d invalid - key must be a string of %d"
- " hexa-decimal numbers\n",
- (int) key_len, hash_key_size * 2);
+ fprintf(stderr,
+ "key length: %d invalid - key must be a string of %d hexa-decimal numbers\n",
+ (int)key_len, hash_key_size * 2);
return;
}
/* Translate RSS hash key into binary representation */
},
};
+/* *** cleanup txq mbufs *** */
+struct cmd_cleanup_txq_mbufs_result {
+ cmdline_fixed_string_t port;
+ cmdline_fixed_string_t keyword;
+ cmdline_fixed_string_t name;
+ uint16_t port_id;
+ uint16_t queue_id;
+ uint32_t free_cnt;
+};
+
+static void
+cmd_cleanup_txq_mbufs_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_cleanup_txq_mbufs_result *res = parsed_result;
+ uint16_t port_id = res->port_id;
+ uint16_t queue_id = res->queue_id;
+ uint32_t free_cnt = res->free_cnt;
+ struct rte_eth_txq_info qinfo;
+ int ret;
+
+ if (test_done == 0) {
+ fprintf(stderr, "Please stop forwarding first\n");
+ return;
+ }
+
+ if (rte_eth_tx_queue_info_get(port_id, queue_id, &qinfo)) {
+ fprintf(stderr, "Failed to get port %u Tx queue %u info\n",
+ port_id, queue_id);
+ return;
+ }
+
+ if (qinfo.queue_state != RTE_ETH_QUEUE_STATE_STARTED) {
+ fprintf(stderr, "Tx queue %u not started\n", queue_id);
+ return;
+ }
+
+ ret = rte_eth_tx_done_cleanup(port_id, queue_id, free_cnt);
+ if (ret < 0) {
+ fprintf(stderr,
+ "Failed to cleanup mbuf for port %u Tx queue %u error desc: %s(%d)\n",
+ port_id, queue_id, strerror(-ret), ret);
+ return;
+ }
+
+ printf("Cleanup port %u Tx queue %u mbuf nums: %u\n",
+ port_id, queue_id, ret);
+}
+
+cmdline_parse_token_string_t cmd_cleanup_txq_mbufs_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_cleanup_txq_mbufs_result, port,
+ "port");
+cmdline_parse_token_string_t cmd_cleanup_txq_mbufs_cleanup =
+ TOKEN_STRING_INITIALIZER(struct cmd_cleanup_txq_mbufs_result, keyword,
+ "cleanup");
+cmdline_parse_token_num_t cmd_cleanup_txq_mbufs_port_id =
+ TOKEN_NUM_INITIALIZER(struct cmd_cleanup_txq_mbufs_result, port_id,
+ RTE_UINT16);
+cmdline_parse_token_string_t cmd_cleanup_txq_mbufs_txq =
+ TOKEN_STRING_INITIALIZER(struct cmd_cleanup_txq_mbufs_result, name,
+ "txq");
+cmdline_parse_token_num_t cmd_cleanup_txq_mbufs_queue_id =
+ TOKEN_NUM_INITIALIZER(struct cmd_cleanup_txq_mbufs_result, queue_id,
+ RTE_UINT16);
+cmdline_parse_token_num_t cmd_cleanup_txq_mbufs_free_cnt =
+ TOKEN_NUM_INITIALIZER(struct cmd_cleanup_txq_mbufs_result, free_cnt,
+ RTE_UINT32);
+
+cmdline_parse_inst_t cmd_cleanup_txq_mbufs = {
+ .f = cmd_cleanup_txq_mbufs_parsed,
+ .data = NULL,
+ .help_str = "port cleanup <port_id> txq <queue_id> <free_cnt>",
+ .tokens = {
+ (void *)&cmd_cleanup_txq_mbufs_port,
+ (void *)&cmd_cleanup_txq_mbufs_cleanup,
+ (void *)&cmd_cleanup_txq_mbufs_port_id,
+ (void *)&cmd_cleanup_txq_mbufs_txq,
+ (void *)&cmd_cleanup_txq_mbufs_queue_id,
+ (void *)&cmd_cleanup_txq_mbufs_free_cnt,
+ NULL,
+ },
+};
+
/* *** configure port rxq/txq ring size *** */
struct cmd_config_rxtx_ring_size {
cmdline_fixed_string_t port;
return;
if (res->portid == (portid_t)RTE_PORT_ALL) {
- printf("Invalid port id\n");
+ fprintf(stderr, "Invalid port id\n");
return;
}
else if (!strcmp(res->rxtxq, "txq"))
isrx = 0;
else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
return;
if (isrx && res->size != 0 && res->size <= rx_free_thresh) {
- printf("Invalid rx ring_size, must > rx_free_thresh: %d\n",
- rx_free_thresh);
+ fprintf(stderr,
+ "Invalid rx ring_size, must > rx_free_thresh: %d\n",
+ rx_free_thresh);
return;
}
int ret = 0;
if (test_done == 0) {
- printf("Please stop forwarding first\n");
+ fprintf(stderr, "Please stop forwarding first\n");
return;
}
return;
if (port_is_started(res->portid) != 1) {
- printf("Please start port %u first\n", res->portid);
+ fprintf(stderr, "Please start port %u first\n", res->portid);
return;
}
else if (!strcmp(res->rxtxq, "txq"))
isrx = 0;
else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
else if (!strcmp(res->opname, "stop"))
isstart = 0;
else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
ret = rte_eth_dev_tx_queue_stop(res->portid, res->qid);
if (ret == -ENOTSUP)
- printf("Function not supported in PMD driver\n");
+ fprintf(stderr, "Function not supported in PMD driver\n");
}
cmdline_parse_token_string_t cmd_config_rxtx_queue_port =
return;
if (port_is_started(res->port_id) != 0) {
- printf("Please stop port %u first\n", res->port_id);
+ fprintf(stderr, "Please stop port %u first\n", res->port_id);
return;
}
return;
if (res->portid == (portid_t)RTE_PORT_ALL) {
- printf("Invalid port id\n");
+ fprintf(stderr, "Invalid port id\n");
return;
}
else if (!strcmp(res->rxtxq, "txq"))
isrx = 0;
else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
if (isrx && rx_queue_id_is_invalid(res->qid)) {
- printf("Invalid rx queue\n");
+ fprintf(stderr, "Invalid rx queue\n");
return;
} else if (!isrx && tx_queue_id_is_invalid(res->qid)) {
- printf("Invalid tx queue\n");
+ fprintf(stderr, "Invalid tx queue\n");
return;
}
mp = mbuf_pool_find(socket_id, 0);
if (mp == NULL) {
- printf("Failed to setup RX queue: "
- "No mempool allocation"
- " on the socket %d\n",
+ fprintf(stderr,
+ "Failed to setup RX queue: No mempool allocation on the socket %d\n",
rxring_numa[res->portid]);
return;
}
&port->rx_conf[res->qid],
mp);
if (ret)
- printf("Failed to setup RX queue\n");
+ fprintf(stderr, "Failed to setup RX queue\n");
} else {
socket_id = txring_numa[res->portid];
if (!numa_support || socket_id == NUMA_NO_CONFIG)
socket_id = port->socket_id;
+ if (port->nb_tx_desc[res->qid] < tx_pkt_nb_segs) {
+ fprintf(stderr,
+ "Failed to setup TX queue: not enough descriptors\n");
+ return;
+ }
ret = rte_eth_tx_queue_setup(res->portid,
res->qid,
port->nb_tx_desc[res->qid],
socket_id,
&port->tx_conf[res->qid]);
if (ret)
- printf("Failed to setup TX queue\n");
+ fprintf(stderr, "Failed to setup TX queue\n");
}
}
nb_queue = (uint16_t)int_fld[FLD_QUEUE];
if (hash_index >= nb_entries) {
- printf("Invalid RETA hash index=%d\n", hash_index);
+ fprintf(stderr, "Invalid RETA hash index=%d\n",
+ hash_index);
return -1;
}
return;
if (dev_info.reta_size == 0) {
- printf("Redirection table size is 0 which is "
- "invalid for RSS\n");
+ fprintf(stderr,
+ "Redirection table size is 0 which is invalid for RSS\n");
return;
} else
printf("The reta size of port %d is %u\n",
res->port_id, dev_info.reta_size);
if (dev_info.reta_size > ETH_RSS_RETA_SIZE_512) {
- printf("Currently do not support more than %u entries of "
- "redirection table\n", ETH_RSS_RETA_SIZE_512);
+ fprintf(stderr,
+ "Currently do not support more than %u entries of redirection table\n",
+ ETH_RSS_RETA_SIZE_512);
return;
}
if (!strcmp(res->list_name, "reta")) {
if (parse_reta_config(res->list_of_items, reta_conf,
dev_info.reta_size)) {
- printf("Invalid RSS Redirection Table "
- "config entered\n");
+ fprintf(stderr,
+ "Invalid RSS Redirection Table config entered\n");
return;
}
ret = rte_eth_dev_rss_reta_update(res->port_id,
reta_conf, dev_info.reta_size);
if (ret != 0)
- printf("Bad redirection table parameter, "
- "return code = %d \n", ret);
+ fprintf(stderr,
+ "Bad redirection table parameter, return code = %d\n",
+ ret);
}
}
return -1;
size = p0 - p;
if (size >= sizeof(s)) {
- printf("The string size exceeds the internal buffer size\n");
+ fprintf(stderr,
+ "The string size exceeds the internal buffer size\n");
return -1;
}
snprintf(s, sizeof(s), "%.*s", size, p);
ret = rte_strsplit(s, sizeof(s), str_fld, num, ',');
if (ret <= 0 || ret != num) {
- printf("The bits of masks do not match the number of "
- "reta entries: %u\n", num);
+ fprintf(stderr,
+ "The bits of masks do not match the number of reta entries: %u\n",
+ num);
return -1;
}
for (i = 0; i < ret; i++)
max_reta_size = RTE_MIN(dev_info.reta_size, ETH_RSS_RETA_SIZE_512);
if (res->size == 0 || res->size > max_reta_size) {
- printf("Invalid redirection table size: %u (1-%u)\n",
+ fprintf(stderr, "Invalid redirection table size: %u (1-%u)\n",
res->size, max_reta_size);
return;
}
memset(reta_conf, 0, sizeof(reta_conf));
if (showport_parse_reta_config(reta_conf, res->size,
res->list_of_items) < 0) {
- printf("Invalid string: %s for reta masks\n",
- res->list_of_items);
+ fprintf(stderr, "Invalid string: %s for reta masks\n",
+ res->list_of_items);
return;
}
port_rss_reta_info(res->port_id, reta_conf, res->size);
__rte_unused void *data)
{
struct cmd_config_dcb *res = parsed_result;
+ struct rte_eth_dcb_info dcb_info;
portid_t port_id = res->port_id;
struct rte_port *port;
uint8_t pfc_en;
port = &ports[port_id];
/** Check if the port is not started **/
if (port->port_status != RTE_PORT_STOPPED) {
- printf("Please stop port %d first\n", port_id);
+ fprintf(stderr, "Please stop port %d first\n", port_id);
return;
}
if ((res->num_tcs != ETH_4_TCS) && (res->num_tcs != ETH_8_TCS)) {
- printf("The invalid number of traffic class,"
- " only 4 or 8 allowed.\n");
+ fprintf(stderr,
+ "The invalid number of traffic class, only 4 or 8 allowed.\n");
return;
}
if (nb_fwd_lcores < res->num_tcs) {
- printf("nb_cores shouldn't be less than number of TCs.\n");
+ fprintf(stderr,
+ "nb_cores shouldn't be less than number of TCs.\n");
+ return;
+ }
+
+ /* Check whether the port supports the report of DCB info. */
+ ret = rte_eth_dev_get_dcb_info(port_id, &dcb_info);
+ if (ret == -ENOTSUP) {
+ fprintf(stderr, "rte_eth_dev_get_dcb_info not supported.\n");
return;
}
+
if (!strncmp(res->pfc_en, "on", 2))
pfc_en = 1;
else
ret = init_port_dcb_config(port_id, DCB_ENABLED,
(enum rte_eth_nb_tcs)res->num_tcs,
pfc_en);
-
-
if (ret != 0) {
- printf("Cannot initialize network ports.\n");
+ fprintf(stderr, "Cannot initialize network ports.\n");
return;
}
+ fwd_config_setup();
+
cmd_reconfig_device_queue(port_id, 1, 1);
}
int ret;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
rec_nb_pkts);
nb_pkt_per_burst = rec_nb_pkts;
} else if (res->value > MAX_PKT_BURST) {
- printf("burst must be >= 1 && <= %d\n", MAX_PKT_BURST);
+ fprintf(stderr, "burst must be >= 1 && <= %d\n",
+ MAX_PKT_BURST);
return;
} else
nb_pkt_per_burst = res->value;
} else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
struct cmd_config_thresh *res = parsed_result;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
else if(!strcmp(res->name, "rxwt"))
rx_wthresh = res->value;
else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
struct cmd_config_threshold *res = parsed_result;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
else if (!strcmp(res->name, "rxfreet"))
rx_free_thresh = res->value;
else {
- printf("Unknown parameter\n");
+ fprintf(stderr, "Unknown parameter\n");
return;
}
/* *** SET CORELIST and PORTLIST CONFIGURATION *** */
unsigned int
-parse_item_list(char* str, const char* item_name, unsigned int max_items,
+parse_item_list(const char *str, const char *item_name, unsigned int max_items,
unsigned int *parsed_items, int check_unique_values)
{
unsigned int nb_item;
continue;
}
if (c != ',') {
- printf("character %c is not a decimal digit\n", c);
+ fprintf(stderr, "character %c is not a decimal digit\n", c);
return 0;
}
if (! value_ok) {
- printf("No valid value before comma\n");
+ fprintf(stderr, "No valid value before comma\n");
return 0;
}
if (nb_item < max_items) {
nb_item++;
}
if (nb_item >= max_items) {
- printf("Number of %s = %u > %u (maximum items)\n",
- item_name, nb_item + 1, max_items);
+ fprintf(stderr, "Number of %s = %u > %u (maximum items)\n",
+ item_name, nb_item + 1, max_items);
return 0;
}
parsed_items[nb_item++] = value;
for (i = 0; i < nb_item; i++) {
for (j = i + 1; j < nb_item; j++) {
if (parsed_items[j] == parsed_items[i]) {
- printf("duplicated %s %u at index %u and %u\n",
- item_name, parsed_items[i], i, j);
+ fprintf(stderr,
+ "duplicated %s %u at index %u and %u\n",
+ item_name, parsed_items[i], i, j);
return 0;
}
}
unsigned int nb_item;
if (test_done == 0) {
- printf("Please stop forwarding first\n");
+ fprintf(stderr, "Please stop forwarding first\n");
return;
}
struct cmd_setmask_result *res = parsed_result;
if (test_done == 0) {
- printf("Please stop forwarding first\n");
+ fprintf(stderr, "Please stop forwarding first\n");
return;
}
if (!strcmp(res->mask, "coremask")) {
else {
ret = rte_log_set_level_regexp(res->type, res->level);
if (ret < 0)
- printf("Unable to set log level\n");
+ fprintf(stderr, "Unable to set log level\n");
}
}
/* No queue_id, return */
if(i + 1 >= len) {
- printf("must specify (port,queue_id)\n");
+ fprintf(stderr, "must specify (port,queue_id)\n");
return;
}
tmp = strtoul(str + i + 1, NULL, 0);
else if (!strcmp(res->vlan_type, "outer"))
vlan_type = ETH_VLAN_TYPE_OUTER;
else {
- printf("Unknown vlan type\n");
+ fprintf(stderr, "Unknown vlan type\n");
return;
}
vlan_tpid_set(res->port_id, vlan_type, res->tp_id);
return;
if (!port_is_stopped(res->port_id)) {
- printf("Please stop port %d first\n", res->port_id);
+ fprintf(stderr, "Please stop port %d first\n", res->port_id);
return;
}
return;
if (!port_is_stopped(res->port_id)) {
- printf("Please stop port %d first\n", res->port_id);
+ fprintf(stderr, "Please stop port %d first\n", res->port_id);
return;
}
return;
if (!port_is_stopped(res->port_id)) {
- printf("Please stop port %d first\n", res->port_id);
+ fprintf(stderr, "Please stop port %d first\n", res->port_id);
return;
}
if ((tx_offloads & DEV_TX_OFFLOAD_IPV4_CKSUM) &&
(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_IPV4_CKSUM) == 0) {
- printf("Warning: hardware IP checksum enabled but not "
- "supported by port %d\n", port_id);
+ fprintf(stderr,
+ "Warning: hardware IP checksum enabled but not supported by port %d\n",
+ port_id);
}
if ((tx_offloads & DEV_TX_OFFLOAD_UDP_CKSUM) &&
(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_UDP_CKSUM) == 0) {
- printf("Warning: hardware UDP checksum enabled but not "
- "supported by port %d\n", port_id);
+ fprintf(stderr,
+ "Warning: hardware UDP checksum enabled but not supported by port %d\n",
+ port_id);
}
if ((tx_offloads & DEV_TX_OFFLOAD_TCP_CKSUM) &&
(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_TCP_CKSUM) == 0) {
- printf("Warning: hardware TCP checksum enabled but not "
- "supported by port %d\n", port_id);
+ fprintf(stderr,
+ "Warning: hardware TCP checksum enabled but not supported by port %d\n",
+ port_id);
}
if ((tx_offloads & DEV_TX_OFFLOAD_SCTP_CKSUM) &&
(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_SCTP_CKSUM) == 0) {
- printf("Warning: hardware SCTP checksum enabled but not "
- "supported by port %d\n", port_id);
+ fprintf(stderr,
+ "Warning: hardware SCTP checksum enabled but not supported by port %d\n",
+ port_id);
}
if ((tx_offloads & DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM) &&
(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM) == 0) {
- printf("Warning: hardware outer IP checksum enabled but not "
- "supported by port %d\n", port_id);
+ fprintf(stderr,
+ "Warning: hardware outer IP checksum enabled but not supported by port %d\n",
+ port_id);
}
if ((tx_offloads & DEV_TX_OFFLOAD_OUTER_UDP_CKSUM) &&
(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_OUTER_UDP_CKSUM)
== 0) {
- printf("Warning: hardware outer UDP checksum enabled but not "
- "supported by port %d\n", port_id);
+ fprintf(stderr,
+ "Warning: hardware outer UDP checksum enabled but not supported by port %d\n",
+ port_id);
}
}
int k;
/* Apply queue tx offloads configuration */
- for (k = 0; k < port->dev_info.max_rx_queues; k++)
+ for (k = 0; k < port->dev_info.max_tx_queues; k++)
port->tx_conf[k].offloads =
port->dev_conf.txmode.offloads;
}
int ret;
if (port_id_is_invalid(res->port_id, ENABLED_WARN)) {
- printf("invalid port %d\n", res->port_id);
+ fprintf(stderr, "invalid port %d\n", res->port_id);
return;
}
if (!port_is_stopped(res->port_id)) {
- printf("Please stop port %d first\n", res->port_id);
+ fprintf(stderr, "Please stop port %d first\n", res->port_id);
return;
}
DEV_TX_OFFLOAD_IPV4_CKSUM)) {
csum_offloads |= DEV_TX_OFFLOAD_IPV4_CKSUM;
} else {
- printf("IP checksum offload is not supported "
- "by port %u\n", res->port_id);
+ fprintf(stderr,
+ "IP checksum offload is not supported by port %u\n",
+ res->port_id);
}
} else if (!strcmp(res->proto, "udp")) {
if (hw == 0 || (dev_info.tx_offload_capa &
DEV_TX_OFFLOAD_UDP_CKSUM)) {
csum_offloads |= DEV_TX_OFFLOAD_UDP_CKSUM;
} else {
- printf("UDP checksum offload is not supported "
- "by port %u\n", res->port_id);
+ fprintf(stderr,
+ "UDP checksum offload is not supported by port %u\n",
+ res->port_id);
}
} else if (!strcmp(res->proto, "tcp")) {
if (hw == 0 || (dev_info.tx_offload_capa &
DEV_TX_OFFLOAD_TCP_CKSUM)) {
csum_offloads |= DEV_TX_OFFLOAD_TCP_CKSUM;
} else {
- printf("TCP checksum offload is not supported "
- "by port %u\n", res->port_id);
+ fprintf(stderr,
+ "TCP checksum offload is not supported by port %u\n",
+ res->port_id);
}
} else if (!strcmp(res->proto, "sctp")) {
if (hw == 0 || (dev_info.tx_offload_capa &
DEV_TX_OFFLOAD_SCTP_CKSUM)) {
csum_offloads |= DEV_TX_OFFLOAD_SCTP_CKSUM;
} else {
- printf("SCTP checksum offload is not supported "
- "by port %u\n", res->port_id);
+ fprintf(stderr,
+ "SCTP checksum offload is not supported by port %u\n",
+ res->port_id);
}
} else if (!strcmp(res->proto, "outer-ip")) {
if (hw == 0 || (dev_info.tx_offload_capa &
csum_offloads |=
DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM;
} else {
- printf("Outer IP checksum offload is not "
- "supported by port %u\n", res->port_id);
+ fprintf(stderr,
+ "Outer IP checksum offload is not supported by port %u\n",
+ res->port_id);
}
} else if (!strcmp(res->proto, "outer-udp")) {
if (hw == 0 || (dev_info.tx_offload_capa &
csum_offloads |=
DEV_TX_OFFLOAD_OUTER_UDP_CKSUM;
} else {
- printf("Outer UDP checksum offload is not "
- "supported by port %u\n", res->port_id);
+ fprintf(stderr,
+ "Outer UDP checksum offload is not supported by port %u\n",
+ res->port_id);
}
}
if (port_id_is_invalid(res->port_id, ENABLED_WARN))
return;
if (!port_is_stopped(res->port_id)) {
- printf("Please stop port %d first\n", res->port_id);
+ fprintf(stderr, "Please stop port %d first\n", res->port_id);
return;
}
if ((ports[res->port_id].tso_segsz != 0) &&
(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_TCP_TSO) == 0) {
- printf("Error: TSO is not supported by port %d\n",
- res->port_id);
+ fprintf(stderr, "Error: TSO is not supported by port %d\n",
+ res->port_id);
return;
}
if ((ports[res->port_id].tso_segsz != 0) &&
(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_TCP_TSO) == 0) {
- printf("Warning: TSO enabled but not "
- "supported by port %d\n", res->port_id);
+ fprintf(stderr,
+ "Warning: TSO enabled but not supported by port %d\n",
+ res->port_id);
}
cmd_reconfig_device_queue(res->port_id, 1, 1);
return dev_info;
if (!(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_VXLAN_TNL_TSO))
- printf("Warning: VXLAN TUNNEL TSO not supported therefore "
- "not enabled for port %d\n", port_id);
+ fprintf(stderr,
+ "Warning: VXLAN TUNNEL TSO not supported therefore not enabled for port %d\n",
+ port_id);
if (!(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_GRE_TNL_TSO))
- printf("Warning: GRE TUNNEL TSO not supported therefore "
- "not enabled for port %d\n", port_id);
+ fprintf(stderr,
+ "Warning: GRE TUNNEL TSO not supported therefore not enabled for port %d\n",
+ port_id);
if (!(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_IPIP_TNL_TSO))
- printf("Warning: IPIP TUNNEL TSO not supported therefore "
- "not enabled for port %d\n", port_id);
+ fprintf(stderr,
+ "Warning: IPIP TUNNEL TSO not supported therefore not enabled for port %d\n",
+ port_id);
if (!(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_GENEVE_TNL_TSO))
- printf("Warning: GENEVE TUNNEL TSO not supported therefore "
- "not enabled for port %d\n", port_id);
+ fprintf(stderr,
+ "Warning: GENEVE TUNNEL TSO not supported therefore not enabled for port %d\n",
+ port_id);
if (!(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_IP_TNL_TSO))
- printf("Warning: IP TUNNEL TSO not supported therefore "
- "not enabled for port %d\n", port_id);
+ fprintf(stderr,
+ "Warning: IP TUNNEL TSO not supported therefore not enabled for port %d\n",
+ port_id);
if (!(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_UDP_TNL_TSO))
- printf("Warning: UDP TUNNEL TSO not supported therefore "
- "not enabled for port %d\n", port_id);
+ fprintf(stderr,
+ "Warning: UDP TUNNEL TSO not supported therefore not enabled for port %d\n",
+ port_id);
return dev_info;
}
if (port_id_is_invalid(res->port_id, ENABLED_WARN))
return;
if (!port_is_stopped(res->port_id)) {
- printf("Please stop port %d first\n", res->port_id);
+ fprintf(stderr, "Please stop port %d first\n", res->port_id);
return;
}
*/
if (!ports[res->port_id].parse_tunnel)
- printf("Warning: csum parse_tunnel must be set "
- "so that tunneled packets are recognized\n");
+ fprintf(stderr,
+ "Warning: csum parse_tunnel must be set so that tunneled packets are recognized\n");
if (!(ports[res->port_id].dev_conf.txmode.offloads &
DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM))
- printf("Warning: csum set outer-ip must be set to hw "
- "if outer L3 is IPv4; not necessary for IPv6\n");
+ fprintf(stderr,
+ "Warning: csum set outer-ip must be set to hw if outer L3 is IPv4; not necessary for IPv6\n");
}
cmd_config_queue_tx_offloads(&ports[res->port_id]);
struct cmd_gso_size_result *res = parsed_result;
if (test_done == 0) {
- printf("Before setting GSO segsz, please first"
- " stop forwarding\n");
+ fprintf(stderr,
+ "Before setting GSO segsz, please first stop forwarding\n");
return;
}
if (!strcmp(res->cmd_keyword, "gso") &&
!strcmp(res->cmd_segsz, "segsz")) {
if (res->cmd_size < RTE_GSO_SEG_SIZE_MIN)
- printf("gso_size should be larger than %zu."
- " Please input a legal value\n",
- RTE_GSO_SEG_SIZE_MIN);
+ fprintf(stderr,
+ "gso_size should be larger than %zu. Please input a legal value\n",
+ RTE_GSO_SEG_SIZE_MIN);
else
gso_max_segment_size = res->cmd_size;
}
struct cmd_gso_show_result *res = parsed_result;
if (!rte_eth_dev_is_valid_port(res->cmd_pid)) {
- printf("invalid port id %u\n", res->cmd_pid);
+ fprintf(stderr, "invalid port id %u\n", res->cmd_pid);
return;
}
if (!strcmp(res->cmd_keyword, "gso")) {
__rte_unused void *data)
{
struct cmd_set_flush_rx *res = parsed_result;
+
+ if (num_procs > 1 && (strcmp(res->mode, "on") == 0)) {
+ printf("multi-process doesn't support to flush Rx queues.\n");
+ return;
+ }
+
no_flush_rx = (uint8_t)((strcmp(res->mode, "on") == 0) ? 0 : 1);
}
rc = rte_pmd_ixgbe_bypass_state_set(port_id, &bypass_mode);
#endif
if (rc != 0)
- printf("\t Failed to set bypass mode for port = %d.\n", port_id);
+ fprintf(stderr, "\t Failed to set bypass mode for port = %d.\n",
+ port_id);
}
cmdline_parse_token_string_t cmd_setbypass_mode_set =
bypass_timeout);
}
if (rc != 0) {
- printf("Failed to set timeout value %u "
- "for port %d, errto code: %d.\n",
- bypass_timeout, port_id, rc);
+ fprintf(stderr,
+ "Failed to set timeout value %u for port %d, errto code: %d.\n",
+ bypass_timeout, port_id, rc);
}
}
#endif
if (rc != 0)
- printf("\t Failed to set bypass event for port = %d.\n",
- port_id);
+ fprintf(stderr, "\t Failed to set bypass event for port = %d.\n",
+ port_id);
}
cmdline_parse_token_string_t cmd_setbypass_event_set =
/* Display the bypass mode.*/
if (rte_pmd_ixgbe_bypass_state_show(port_id, &bypass_mode) != 0) {
- printf("\tFailed to get bypass mode for port = %d\n", port_id);
+ fprintf(stderr, "\tFailed to get bypass mode for port = %d\n",
+ port_id);
return;
}
else {
for (i = RTE_PMD_IXGBE_BYPASS_EVENT_START; i < RTE_DIM(events); i++) {
if (rte_pmd_ixgbe_bypass_event_show(port_id, i, &event_mode)) {
- printf("\tFailed to get bypass mode for event = %s\n",
+ fprintf(stderr,
+ "\tFailed to get bypass mode for event = %s\n",
events[i]);
} else {
if (!RTE_PMD_IXGBE_BYPASS_MODE_VALID(event_mode))
}
#endif
if (rc != 0)
- printf("\tFailed to get bypass configuration for port = %d\n",
+ fprintf(stderr,
+ "\tFailed to get bypass configuration for port = %d\n",
port_id);
}
/* Set the bonding mode for the relevant port. */
if (0 != rte_eth_bond_mode_set(port_id, res->value))
- printf("\t Failed to set bonding mode for port = %d.\n", port_id);
+ fprintf(stderr, "\t Failed to set bonding mode for port = %d.\n",
+ port_id);
}
cmdline_parse_token_string_t cmd_setbonding_mode_set =
/** Check if the port is not started **/
if (port->port_status != RTE_PORT_STOPPED) {
- printf("Please stop port %d first\n", port_id);
+ fprintf(stderr, "Please stop port %d first\n", port_id);
return;
}
} else if (!strcmp(res->policy, "l34")) {
policy = BALANCE_XMIT_POLICY_LAYER34;
} else {
- printf("\t Invalid xmit policy selection");
+ fprintf(stderr, "\t Invalid xmit policy selection");
return;
}
/* Set the bonding mode for the relevant port. */
if (0 != rte_eth_bond_xmit_policy_set(port_id, policy)) {
- printf("\t Failed to set bonding balance xmit policy for port = %d.\n",
- port_id);
+ fprintf(stderr,
+ "\t Failed to set bonding balance xmit policy for port = %d.\n",
+ port_id);
}
}
/* Display the bonding mode.*/
bonding_mode = rte_eth_bond_mode_get(port_id);
if (bonding_mode < 0) {
- printf("\tFailed to get bonding mode for port = %d\n", port_id);
+ fprintf(stderr, "\tFailed to get bonding mode for port = %d\n",
+ port_id);
return;
} else
printf("\tBonding mode: %d\n", bonding_mode);
balance_xmit_policy = rte_eth_bond_xmit_policy_get(port_id);
if (balance_xmit_policy < 0) {
- printf("\tFailed to get balance xmit policy for port = %d\n",
- port_id);
+ fprintf(stderr,
+ "\tFailed to get balance xmit policy for port = %d\n",
+ port_id);
return;
} else {
printf("\tBalance Xmit Policy: ");
num_slaves = rte_eth_bond_slaves_get(port_id, slaves, RTE_MAX_ETHPORTS);
if (num_slaves < 0) {
- printf("\tFailed to get slave list for port = %d\n", port_id);
+ fprintf(stderr, "\tFailed to get slave list for port = %d\n",
+ port_id);
return;
}
if (num_slaves > 0) {
RTE_MAX_ETHPORTS);
if (num_active_slaves < 0) {
- printf("\tFailed to get active slave list for port = %d\n", port_id);
+ fprintf(stderr,
+ "\tFailed to get active slave list for port = %d\n",
+ port_id);
return;
}
if (num_active_slaves > 0) {
primary_id = rte_eth_bond_primary_get(port_id);
if (primary_id < 0) {
- printf("\tFailed to get primary slave for port = %d\n", port_id);
+ fprintf(stderr, "\tFailed to get primary slave for port = %d\n",
+ port_id);
return;
} else
printf("\tPrimary: [%d]\n", primary_id);
/* Set the primary slave for a bonded device. */
if (0 != rte_eth_bond_primary_set(master_port_id, slave_port_id)) {
- printf("\t Failed to set primary slave for port = %d.\n",
- master_port_id);
+ fprintf(stderr, "\t Failed to set primary slave for port = %d.\n",
+ master_port_id);
return;
}
init_port_config();
/* add the slave for a bonded device. */
if (0 != rte_eth_bond_slave_add(master_port_id, slave_port_id)) {
- printf("\t Failed to add slave %d to master port = %d.\n",
- slave_port_id, master_port_id);
+ fprintf(stderr,
+ "\t Failed to add slave %d to master port = %d.\n",
+ slave_port_id, master_port_id);
return;
}
init_port_config();
/* remove the slave from a bonded device. */
if (0 != rte_eth_bond_slave_remove(master_port_id, slave_port_id)) {
- printf("\t Failed to remove slave %d from master port = %d.\n",
- slave_port_id, master_port_id);
+ fprintf(stderr,
+ "\t Failed to remove slave %d from master port = %d.\n",
+ slave_port_id, master_port_id);
return;
}
init_port_config();
int ret;
if (test_done == 0) {
- printf("Please stop forwarding first\n");
+ fprintf(stderr, "Please stop forwarding first\n");
return;
}
/* Create a new bonded device. */
port_id = rte_eth_bond_create(ethdev_name, res->mode, res->socket);
if (port_id < 0) {
- printf("\t Failed to create bonded device.\n");
+ fprintf(stderr, "\t Failed to create bonded device.\n");
return;
} else {
printf("Created new bonded device %s on (port %d).\n", ethdev_name,
reconfig(port_id, res->socket);
ret = rte_eth_promiscuous_enable(port_id);
if (ret != 0)
- printf("Failed to enable promiscuous mode for port %u: %s - ignore\n",
+ fprintf(stderr,
+ "Failed to enable promiscuous mode for port %u: %s - ignore\n",
port_id, rte_strerror(-ret));
ports[port_id].need_setup = 0;
/* check the return value and print it if is < 0 */
if (ret < 0)
- printf("set_bond_mac_addr error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "set_bond_mac_addr error: (%s)\n",
+ strerror(-ret));
}
cmdline_parse_token_string_t cmd_set_bond_mac_addr_set =
/* check the return value and print it if is < 0 */
if (ret < 0)
- printf("set_bond_mac_addr error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "set_bond_mac_addr error: (%s)\n",
+ strerror(-ret));
}
cmdline_parse_token_string_t cmd_set_bond_mon_period_set =
},
};
+/* *** GET CURRENT ETHERNET LINK FLOW CONTROL *** */
+struct cmd_link_flow_ctrl_show {
+ cmdline_fixed_string_t show;
+ cmdline_fixed_string_t port;
+ portid_t port_id;
+ cmdline_fixed_string_t flow_ctrl;
+};
+
+cmdline_parse_token_string_t cmd_lfc_show_show =
+ TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_show,
+ show, "show");
+cmdline_parse_token_string_t cmd_lfc_show_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_show,
+ port, "port");
+cmdline_parse_token_num_t cmd_lfc_show_portid =
+ TOKEN_NUM_INITIALIZER(struct cmd_link_flow_ctrl_show,
+ port_id, RTE_UINT16);
+cmdline_parse_token_string_t cmd_lfc_show_flow_ctrl =
+ TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_show,
+ flow_ctrl, "flow_ctrl");
+
+static void
+cmd_link_flow_ctrl_show_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_link_flow_ctrl_show *res = parsed_result;
+ static const char *info_border = "*********************";
+ struct rte_eth_fc_conf fc_conf;
+ bool rx_fc_en = false;
+ bool tx_fc_en = false;
+ int ret;
+
+ ret = rte_eth_dev_flow_ctrl_get(res->port_id, &fc_conf);
+ if (ret != 0) {
+ fprintf(stderr,
+ "Failed to get current flow ctrl information: err = %d\n",
+ ret);
+ return;
+ }
+
+ if (fc_conf.mode == RTE_FC_RX_PAUSE || fc_conf.mode == RTE_FC_FULL)
+ rx_fc_en = true;
+ if (fc_conf.mode == RTE_FC_TX_PAUSE || fc_conf.mode == RTE_FC_FULL)
+ tx_fc_en = true;
+
+ printf("\n%s Flow control infos for port %-2d %s\n",
+ info_border, res->port_id, info_border);
+ printf("FC mode:\n");
+ printf(" Rx pause: %s\n", rx_fc_en ? "on" : "off");
+ printf(" Tx pause: %s\n", tx_fc_en ? "on" : "off");
+ printf("Autoneg: %s\n", fc_conf.autoneg ? "on" : "off");
+ printf("Pause time: 0x%x\n", fc_conf.pause_time);
+ printf("High waterline: 0x%x\n", fc_conf.high_water);
+ printf("Low waterline: 0x%x\n", fc_conf.low_water);
+ printf("Send XON: %s\n", fc_conf.send_xon ? "on" : "off");
+ printf("Forward MAC control frames: %s\n",
+ fc_conf.mac_ctrl_frame_fwd ? "on" : "off");
+ printf("\n%s************** End ***********%s\n",
+ info_border, info_border);
+}
+
+cmdline_parse_inst_t cmd_link_flow_control_show = {
+ .f = cmd_link_flow_ctrl_show_parsed,
+ .data = NULL,
+ .help_str = "show port <port_id> flow_ctrl",
+ .tokens = {
+ (void *)&cmd_lfc_show_show,
+ (void *)&cmd_lfc_show_port,
+ (void *)&cmd_lfc_show_portid,
+ (void *)&cmd_lfc_show_flow_ctrl,
+ NULL,
+ },
+};
+
/* *** SETUP ETHERNET LINK FLOW CONTROL *** */
struct cmd_link_flow_ctrl_set_result {
cmdline_fixed_string_t set;
if (cmd) {
ret = rte_eth_dev_flow_ctrl_get(res->port_id, &fc_conf);
if (ret != 0) {
- printf("cannot get current flow ctrl parameters, return"
- "code = %d\n", ret);
+ fprintf(stderr,
+ "cannot get current flow ctrl parameters, return code = %d\n",
+ ret);
return;
}
ret = rte_eth_dev_flow_ctrl_set(res->port_id, &fc_conf);
if (ret != 0)
- printf("bad flow contrl parameter, return code = %d \n", ret);
+ fprintf(stderr,
+ "bad flow control parameter, return code = %d\n",
+ ret);
}
/* *** SETUP ETHERNET PRIORITY FLOW CONTROL *** */
ret = rte_eth_dev_priority_flow_ctrl_set(res->port_id, &pfc_conf);
if (ret != 0)
- printf("bad priority flow contrl parameter, return code = %d \n", ret);
+ fprintf(stderr,
+ "bad priority flow control parameter, return code = %d\n",
+ ret);
}
cmdline_parse_token_string_t cmd_pfc_set_set =
else if (!strcmp(res->type, "module_eeprom"))
port_module_eeprom_display(res->portnum);
else
- printf("Unknown argument\n");
+ fprintf(stderr, "Unknown argument\n");
}
cmdline_parse_token_string_t cmd_showeeprom_show =
/* check the return value and print it if is < 0 */
if(ret < 0)
- printf("mac_addr_cmd error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "mac_addr_cmd error: (%s)\n", strerror(-ret));
}
struct cmd_eth_peer_result *res = parsed_result;
if (test_done == 0) {
- printf("Please stop forwarding first\n");
+ fprintf(stderr, "Please stop forwarding first\n");
return;
}
if (!strcmp(res->eth_peer, "eth-peer")) {
ret = rte_eth_dev_uc_hash_table_set(res->port_id,
&res->address,(uint8_t)is_on);
if (ret < 0)
- printf("bad unicast hash table parameter, return code = %d \n", ret);
+ fprintf(stderr,
+ "bad unicast hash table parameter, return code = %d\n",
+ ret);
}
(strcmp(res->value, "all") == 0))
ret = rte_eth_dev_uc_all_hash_table_set(res->port_id,(uint8_t) is_on);
if (ret < 0)
- printf("bad unicast hash table parameter,"
- "return code = %d \n", ret);
+ fprintf(stderr,
+ "bad unicast hash table parameter, return code = %d\n",
+ ret);
}
cmdline_parse_token_string_t cmd_set_uc_all_hash_set =
vf_rxmode, (uint8_t)is_on);
#endif
if (ret < 0)
- printf("bad VF receive mode parameter, return code = %d \n",
- ret);
+ fprintf(stderr,
+ "bad VF receive mode parameter, return code = %d\n",
+ ret);
}
cmdline_parse_token_string_t cmd_set_vf_rxmode_set =
#endif
if(ret < 0)
- printf("vf_mac_addr_cmd error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "vf_mac_addr_cmd error: (%s)\n", strerror(-ret));
}
case 0:
break;
case -EINVAL:
- printf("invalid vlan_id %d or vf_mask %"PRIu64"\n",
- res->vlan_id, res->vf_mask);
+ fprintf(stderr, "invalid vlan_id %d or vf_mask %"PRIu64"\n",
+ res->vlan_id, res->vf_mask);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented or supported\n");
+ fprintf(stderr, "function not implemented or supported\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
ret = set_queue_rate_limit(res->port_num, res->queue_num,
res->rate_num);
if (ret < 0)
- printf("queue_rate_limit_cmd error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "queue_rate_limit_cmd error: (%s)\n",
+ strerror(-ret));
}
ret = set_vf_rate_limit(res->port_num, res->vf_num,
res->rate_num, res->q_msk_val);
if (ret < 0)
- printf("vf_rate_limit_cmd error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "vf_rate_limit_cmd error: (%s)\n",
+ strerror(-ret));
}
&tunnel_udp);
if (ret < 0)
- printf("udp tunneling add error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "udp tunneling add error: (%s)\n",
+ strerror(-ret));
}
cmdline_parse_token_string_t cmd_tunnel_udp_config_rx_vxlan_port =
} else if (!strcmp(res->tunnel_type, "ecpri")) {
tunnel_udp.prot_type = RTE_TUNNEL_TYPE_ECPRI;
} else {
- printf("Invalid tunnel type\n");
+ fprintf(stderr, "Invalid tunnel type\n");
return;
}
&tunnel_udp);
if (ret < 0)
- printf("udp tunneling port add error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "udp tunneling port add error: (%s)\n",
+ strerror(-ret));
}
cmdline_parse_token_string_t cmd_config_tunnel_udp_port_port =
for (i = 0; i < nb_item; i++) {
if (vlan_list[i] > RTE_ETHER_MAX_VLAN_ID) {
- printf("Invalid vlan_id: must be < 4096\n");
+ fprintf(stderr,
+ "Invalid vlan_id: must be < 4096\n");
return;
}
ret = rte_eth_mirror_rule_set(res->port_id, &mr_conf,
res->rule_id, 0);
if (ret < 0)
- printf("mirror rule add error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "mirror rule add error: (%s)\n",
+ strerror(-ret));
}
cmdline_parse_inst_t cmd_set_mirror_mask = {
/* check the return value and print it if is < 0 */
if (ret < 0)
- printf("mirror rule add error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "mirror rule add error: (%s)\n",
+ strerror(-ret));
}
/* check rule_id */
ret = rte_eth_mirror_rule_reset(res->port_id,res->rule_id);
if(ret < 0)
- printf("mirror rule remove error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "mirror rule remove error: (%s)\n",
+ strerror(-ret));
}
cmdline_parse_inst_t cmd_reset_mirror_rule = {
fprintf(f,
"Total : size(M) total: %.6lf alloc: %.6lf(%.3lf%%) free: %.6lf \tcount alloc: %-4u free: %u\n",
(double)total / (1024 * 1024), (double)alloc / (1024 * 1024),
- (double)alloc * 100 / (double)total,
+ total ? ((double)alloc * 100 / (double)total) : 0,
(double)free / (1024 * 1024),
n_alloc, n_free);
if (last_allocs)
case 0:
break;
case -ENOTSUP:
- printf("function not implemented or supported\n");
+ fprintf(stderr, "function not implemented or supported\n");
break;
default:
- printf("queue region config error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "queue region config error: (%s)\n",
+ strerror(-ret));
}
}
case 0:
break;
case -ENOTSUP:
- printf("function not implemented or supported\n");
+ fprintf(stderr, "function not implemented or supported\n");
break;
default:
- printf("region flowtype config error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "region flowtype config error: (%s)\n",
+ strerror(-ret));
}
}
case 0:
break;
case -ENOTSUP:
- printf("function not implemented or supported\n");
+ fprintf(stderr, "function not implemented or supported\n");
break;
default:
- printf("user_priority region config error: (%s)\n",
- strerror(-ret));
+ fprintf(stderr, "user_priority region config error: (%s)\n",
+ strerror(-ret));
}
}
case 0:
break;
case -ENOTSUP:
- printf("function not implemented or supported\n");
+ fprintf(stderr, "function not implemented or supported\n");
break;
default:
- printf("queue region config flush error: (%s)\n",
- strerror(-ret));
+ fprintf(stderr, "queue region config flush error: (%s)\n",
+ strerror(-ret));
}
}
case 0:
break;
case -ENOTSUP:
- printf("function not implemented or supported\n");
+ fprintf(stderr, "function not implemented or supported\n");
break;
default:
- printf("queue region config info show error: (%s)\n",
- strerror(-ret));
+ fprintf(stderr, "queue region config info show error: (%s)\n",
+ strerror(-ret));
}
}
if ((ip_addr).family == AF_INET) \
(ip) = (ip_addr).addr.ipv4.s_addr; \
else { \
- printf("invalid parameter.\n"); \
+ fprintf(stderr, "invalid parameter.\n"); \
return; \
} \
} while (0)
&((ip_addr).addr.ipv6), \
sizeof(struct in6_addr)); \
else { \
- printf("invalid parameter.\n"); \
+ fprintf(stderr, "invalid parameter.\n"); \
return; \
} \
} while (0)
memset(&conf, 0, sizeof(conf));
if (flow_type == RTE_ETH_FLOW_UNKNOWN) {
- printf("Invalid flow type specified.\n");
+ fprintf(stderr, "Invalid flow type specified.\n");
return;
}
ret = rte_pmd_i40e_flow_type_mapping_get(res->port_id,
if (ret)
return;
if (mapping[flow_type].pctype == 0ULL) {
- printf("Invalid flow type specified.\n");
+ fprintf(stderr, "Invalid flow type specified.\n");
return;
}
for (i = 0; i < RTE_PMD_I40E_PCTYPE_MAX; i++) {
&conf,
add);
if (ret < 0)
- printf("flow director config error: (%s)\n",
- strerror(-ret));
+ fprintf(stderr, "flow director config error: (%s)\n",
+ strerror(-ret));
close_file(conf.input.packet);
}
port = &ports[res->port_id];
/** Check if the port is not started **/
if (port->port_status != RTE_PORT_STOPPED) {
- printf("Please stop port %d first\n", res->port_id);
+ fprintf(stderr, "Please stop port %d first\n", res->port_id);
return;
}
if (fdir_conf.mode == RTE_FDIR_MODE_PERFECT_MAC_VLAN) {
if (strcmp(res->mode_value, "MAC-VLAN")) {
- printf("Please set mode to MAC-VLAN.\n");
+ fprintf(stderr, "Please set mode to MAC-VLAN.\n");
return;
}
mask->vlan_tci_mask = rte_cpu_to_be_16(res->vlan_mask);
} else if (fdir_conf.mode == RTE_FDIR_MODE_PERFECT_TUNNEL) {
if (strcmp(res->mode_value, "Tunnel")) {
- printf("Please set mode to Tunnel.\n");
+ fprintf(stderr, "Please set mode to Tunnel.\n");
return;
}
mask->tunnel_type_mask = res->tunnel_type_mask;
} else {
if (strcmp(res->mode_value, "IP")) {
- printf("Please set mode to IP.\n");
+ fprintf(stderr, "Please set mode to IP.\n");
return;
}
port = &ports[res->port_id];
/** Check if the port is not started **/
if (port->port_status != RTE_PORT_STOPPED) {
- printf("Please stop port %d first\n", res->port_id);
+ fprintf(stderr, "Please stop port %d first\n", res->port_id);
return;
}
ret = parse_offsets(res->payload_cfg, flex_cfg.src_offset,
RTE_ETH_FDIR_MAX_FLEXLEN);
if (ret < 0) {
- printf("error: Cannot parse flex payload input.\n");
+ fprintf(stderr, "error: Cannot parse flex payload input.\n");
return;
}
struct cmd_mcast_addr_result *res = parsed_result;
if (!rte_is_multicast_ether_addr(&res->mc_addr)) {
- printf("Invalid multicast addr %02X:%02X:%02X:%02X:%02X:%02X\n",
- res->mc_addr.addr_bytes[0], res->mc_addr.addr_bytes[1],
- res->mc_addr.addr_bytes[2], res->mc_addr.addr_bytes[3],
- res->mc_addr.addr_bytes[4], res->mc_addr.addr_bytes[5]);
+ fprintf(stderr,
+ "Invalid multicast addr " RTE_ETHER_ADDR_PRT_FMT "\n",
+ RTE_ETHER_ADDR_BYTES(&res->mc_addr));
return;
}
if (strcmp(res->what, "add") == 0)
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d\n", res->vf_id);
+ fprintf(stderr, "invalid vf_id %d\n", res->vf_id);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d or is_on %d\n", res->vf_id, is_on);
+ fprintf(stderr, "invalid vf_id %d or is_on %d\n",
+ res->vf_id, is_on);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d or is_on %d\n", res->vf_id, is_on);
+ fprintf(stderr, "invalid vf_id %d or is_on %d\n",
+ res->vf_id, is_on);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d or vlan_id %d\n", res->vf_id, res->vlan_id);
+ fprintf(stderr, "invalid vf_id %d or vlan_id %d\n",
+ res->vf_id, res->vlan_id);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid is_on %d\n", is_on);
+ fprintf(stderr, "invalid is_on %d\n", is_on);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid is_on %d\n", is_on);
+ fprintf(stderr, "invalid is_on %d\n", is_on);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d or is_on %d\n", res->vf_id, is_on);
+ fprintf(stderr, "invalid vf_id %d or is_on %d\n",
+ res->vf_id, is_on);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("not supported on port %d\n", res->port_id);
+ fprintf(stderr, "not supported on port %d\n", res->port_id);
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d or mac_addr\n", res->vf_id);
+ fprintf(stderr, "invalid vf_id %d or mac_addr\n", res->vf_id);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (!port_is_stopped(port_id)) {
- printf("Please stop port %d first\n", port_id);
+ fprintf(stderr, "Please stop port %d first\n", port_id);
return;
}
cmd_reconfig_device_queue(port_id, 1, 1);
break;
case -ENODEV:
- printf("invalid port_id %d\n", port_id);
+ fprintf(stderr, "invalid port_id %d\n", port_id);
break;
case -ENOTSUP:
- printf("not supported on port %d\n", port_id);
+ fprintf(stderr, "not supported on port %d\n", port_id);
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (!port_is_stopped(port_id)) {
- printf("Please stop port %d first\n", port_id);
+ fprintf(stderr, "Please stop port %d first\n", port_id);
return;
}
cmd_reconfig_device_queue(port_id, 1, 1);
break;
case -ENODEV:
- printf("invalid port_id %d\n", port_id);
+ fprintf(stderr, "invalid port_id %d\n", port_id);
break;
case -ENOTSUP:
- printf("not supported on port %d\n", port_id);
+ fprintf(stderr, "not supported on port %d\n", port_id);
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("not supported on port %d\n", res->port_id);
+ fprintf(stderr, "not supported on port %d\n", res->port_id);
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid idx %d or an %d\n", res->idx, res->an);
+ fprintf(stderr, "invalid idx %d or an %d\n", res->idx, res->an);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("not supported on port %d\n", res->port_id);
+ fprintf(stderr, "not supported on port %d\n", res->port_id);
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d\n", res->vf_id);
+ fprintf(stderr, "invalid vf_id %d\n", res->vf_id);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d\n", res->vf_id);
+ fprintf(stderr, "invalid vf_id %d\n", res->vf_id);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d or is_on %d\n", res->vf_id, is_on);
+ fprintf(stderr, "invalid vf_id %d or is_on %d\n",
+ res->vf_id, is_on);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d or is_on %d\n", res->vf_id, is_on);
+ fprintf(stderr, "invalid vf_id %d or is_on %d\n",
+ res->vf_id, is_on);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d or bandwidth %d\n",
- res->vf_id, res->bw);
+ fprintf(stderr, "invalid vf_id %d or bandwidth %d\n",
+ res->vf_id, res->bw);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
p = strchr(p0, '(');
if (p == NULL) {
- printf("The bandwidth-list should be '(bw1, bw2, ...)'\n");
+ fprintf(stderr,
+ "The bandwidth-list should be '(bw1, bw2, ...)'\n");
return -1;
}
p++;
p0 = strchr(p, ')');
if (p0 == NULL) {
- printf("The bandwidth-list should be '(bw1, bw2, ...)'\n");
+ fprintf(stderr,
+ "The bandwidth-list should be '(bw1, bw2, ...)'\n");
return -1;
}
size = p0 - p;
if (size >= sizeof(s)) {
- printf("The string size exceeds the internal buffer size\n");
+ fprintf(stderr,
+ "The string size exceeds the internal buffer size\n");
return -1;
}
snprintf(s, sizeof(s), "%.*s", size, p);
ret = rte_strsplit(s, sizeof(s), str_fld, 16, ',');
if (ret <= 0) {
- printf("Failed to get the bandwidth list. ");
+ fprintf(stderr, "Failed to get the bandwidth list.\n");
return -1;
}
*tc_num = ret;
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d or bandwidth\n", res->vf_id);
+ fprintf(stderr, "invalid vf_id %d or bandwidth\n", res->vf_id);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
port = &ports[res->port_id];
/** Check if the port is not started **/
if (port->port_status != RTE_PORT_STOPPED) {
- printf("Please stop port %d first\n", res->port_id);
+ fprintf(stderr, "Please stop port %d first\n", res->port_id);
return;
}
case 0:
break;
case -EINVAL:
- printf("invalid bandwidth\n");
+ fprintf(stderr, "invalid bandwidth\n");
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d, tc_no %d or bandwidth %d\n",
- res->vf_id, res->tc_no, res->bw);
+ fprintf(stderr,
+ "invalid vf_id %d, tc_no %d or bandwidth %d\n",
+ res->vf_id, res->tc_no, res->bw);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid tc_bitmap 0x%x\n", res->tc_map);
+ fprintf(stderr, "invalid tc_bitmap 0x%x\n", res->tc_map);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
int ret = -ENOTSUP;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
filepath = strdup(res->filepath);
if (filepath == NULL) {
- printf("Failed to allocate memory\n");
+ fprintf(stderr, "Failed to allocate memory\n");
return;
}
file_num = rte_strsplit(filepath, strlen(filepath), file_fld, 2, ',');
#endif
if (ret == -EEXIST)
- printf("Profile has already existed.\n");
+ fprintf(stderr, "Profile has already existed.\n");
else if (ret < 0)
- printf("Failed to load profile.\n");
+ fprintf(stderr, "Failed to load profile.\n");
else if (file_num == 2)
save_file(file_fld[1], buff, size);
int ret = -ENOTSUP;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
#endif
if (ret == -EACCES)
- printf("Profile does not exist.\n");
+ fprintf(stderr, "Profile does not exist.\n");
else if (ret < 0)
- printf("Failed to delete profile.\n");
+ fprintf(stderr, "Failed to delete profile.\n");
close_file(buff);
}
free(proto);
#endif
if (ret == -ENOTSUP)
- printf("Function not supported in PMD driver\n");
+ fprintf(stderr, "Function not supported in PMD driver\n");
close_file(pkg);
}
size = PROFILE_INFO_SIZE * MAX_PROFILE_NUM + 4;
p_list = (struct rte_pmd_i40e_profile_list *)malloc(size);
if (!p_list) {
- printf("%s: Failed to malloc buffer\n", __func__);
+ fprintf(stderr, "%s: Failed to malloc buffer\n", __func__);
return;
}
#endif
if (ret < 0)
- printf("Failed to get ddp list\n");
+ fprintf(stderr, "Failed to get ddp list\n");
}
cmdline_parse_inst_t cmd_ddp_get_list = {
int ret = -ENOTSUP;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
ret = rte_pmd_i40e_inset_get(res->port_id, res->pctype_id,
&inset, inset_type);
if (ret) {
- printf("Failed to get input set.\n");
+ fprintf(stderr, "Failed to get input set.\n");
return;
}
ret = rte_pmd_i40e_inset_field_clear(&inset.inset,
res->field_idx);
if (ret) {
- printf("Failed to configure input set field.\n");
+ fprintf(stderr, "Failed to configure input set field.\n");
return;
}
ret = rte_pmd_i40e_inset_set(res->port_id, res->pctype_id,
&inset, inset_type);
if (ret) {
- printf("Failed to set input set.\n");
+ fprintf(stderr, "Failed to set input set.\n");
return;
}
#endif
if (ret == -ENOTSUP)
- printf("Function not supported\n");
+ fprintf(stderr, "Function not supported\n");
}
cmdline_parse_token_string_t cmd_cfg_input_set_port =
int ret = -ENOTSUP;
if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
+ fprintf(stderr, "Please stop all ports first\n");
return;
}
ret = rte_pmd_i40e_inset_set(res->port_id, res->pctype_id,
&inset, inset_type);
if (ret) {
- printf("Failed to clear input set.\n");
+ fprintf(stderr, "Failed to clear input set.\n");
return;
}
#endif
if (ret == -ENOTSUP)
- printf("Function not supported\n");
+ fprintf(stderr, "Function not supported\n");
}
cmdline_parse_token_string_t cmd_clear_input_set_port =
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d\n", res->vf_id);
+ fprintf(stderr, "invalid vf_id %d\n", res->vf_id);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
printf("\n %s NIC statistics for port %-2d vf %-2d %s\n",
case 0:
break;
case -EINVAL:
- printf("invalid vf_id %d\n", res->vf_id);
+ fprintf(stderr, "invalid vf_id %d\n", res->vf_id);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
return;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
return;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
return;
}
case 0:
break;
case -EINVAL:
- printf("invalid pctype or flow type\n");
+ fprintf(stderr, "invalid pctype or flow type\n");
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
#ifdef RTE_NET_I40E
case 0:
break;
case -EINVAL:
- printf("invalid ptype 0x%8x or 0x%8x\n",
- res->target, res->pkt_type);
+ fprintf(stderr, "invalid ptype 0x%8x or 0x%8x\n",
+ res->target, res->pkt_type);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
case 0:
break;
case -EINVAL:
- printf("invalid ptype 0x%8x\n", res->sw_ptype);
+ fprintf(stderr, "invalid ptype 0x%8x\n", res->sw_ptype);
break;
case -ENODEV:
- printf("invalid port_id %d\n", res->port_id);
+ fprintf(stderr, "invalid port_id %d\n", res->port_id);
break;
case -ENOTSUP:
- printf("function not implemented\n");
+ fprintf(stderr, "function not implemented\n");
break;
default:
- printf("programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
}
}
int ret;
if (port->port_status != RTE_PORT_STOPPED) {
- printf("Error: Can't config offload when Port %d "
- "is not stopped\n", port_id);
+ fprintf(stderr,
+ "Error: Can't config offload when Port %d is not stopped\n",
+ port_id);
return;
}
single_offload = search_rx_offload(res->offload);
if (single_offload == 0) {
- printf("Unknown offload name: %s\n", res->offload);
+ fprintf(stderr, "Unknown offload name: %s\n", res->offload);
return;
}
int ret;
if (port->port_status != RTE_PORT_STOPPED) {
- printf("Error: Can't config offload when Port %d "
- "is not stopped\n", port_id);
+ fprintf(stderr,
+ "Error: Can't config offload when Port %d is not stopped\n",
+ port_id);
return;
}
return;
if (queue_id >= dev_info.nb_rx_queues) {
- printf("Error: input queue_id should be 0 ... "
- "%d\n", dev_info.nb_rx_queues - 1);
+ fprintf(stderr,
+ "Error: input queue_id should be 0 ... %d\n",
+ dev_info.nb_rx_queues - 1);
return;
}
single_offload = search_rx_offload(res->offload);
if (single_offload == 0) {
- printf("Unknown offload name: %s\n", res->offload);
+ fprintf(stderr, "Unknown offload name: %s\n", res->offload);
return;
}
int ret;
if (port->port_status != RTE_PORT_STOPPED) {
- printf("Error: Can't config offload when Port %d "
- "is not stopped\n", port_id);
+ fprintf(stderr,
+ "Error: Can't config offload when Port %d is not stopped\n",
+ port_id);
return;
}
single_offload = search_tx_offload(res->offload);
if (single_offload == 0) {
- printf("Unknown offload name: %s\n", res->offload);
+ fprintf(stderr, "Unknown offload name: %s\n", res->offload);
return;
}
int ret;
if (port->port_status != RTE_PORT_STOPPED) {
- printf("Error: Can't config offload when Port %d "
- "is not stopped\n", port_id);
+ fprintf(stderr,
+ "Error: Can't config offload when Port %d is not stopped\n",
+ port_id);
return;
}
return;
if (queue_id >= dev_info.nb_tx_queues) {
- printf("Error: input queue_id should be 0 ... "
- "%d\n", dev_info.nb_tx_queues - 1);
+ fprintf(stderr,
+ "Error: input queue_id should be 0 ... %d\n",
+ dev_info.nb_tx_queues - 1);
return;
}
single_offload = search_tx_offload(res->offload);
if (single_offload == 0) {
- printf("Unknown offload name: %s\n", res->offload);
+ fprintf(stderr, "Unknown offload name: %s\n", res->offload);
return;
}
if (flag <= 0) {
if (strlcpy(desc_flag.name, res->name,
RTE_MBUF_DYN_NAMESIZE) >= RTE_MBUF_DYN_NAMESIZE) {
- printf("Flag name too long\n");
+ fprintf(stderr, "Flag name too long\n");
return;
}
desc_flag.flags = 0;
flag = rte_mbuf_dynflag_register(&desc_flag);
if (flag < 0) {
- printf("Can't register flag\n");
+ fprintf(stderr, "Can't register flag\n");
return;
}
strcpy(dynf_names[flag], desc_flag.name);
struct cmd_show_tx_metadata_result *res = parsed_result;
if (!rte_eth_dev_is_valid_port(res->cmd_pid)) {
- printf("invalid port id %u\n", res->cmd_pid);
+ fprintf(stderr, "invalid port id %u\n", res->cmd_pid);
return;
}
if (!strcmp(res->cmd_keyword, "tx_metadata")) {
int ret;
if (!rte_eth_dev_is_valid_port(res->cmd_pid)) {
- printf("Invalid port id %u\n", res->cmd_pid);
+ fprintf(stderr, "Invalid port id %u\n", res->cmd_pid);
return;
}
ret = rte_eth_fec_get_capability(res->cmd_pid, NULL, 0);
if (ret == -ENOTSUP) {
- printf("Function not implemented\n");
+ fprintf(stderr, "Function not implemented\n");
return;
} else if (ret < 0) {
- printf("Get FEC capability failed: %d\n", ret);
+ fprintf(stderr, "Get FEC capability failed: %d\n", ret);
return;
}
num = (unsigned int)ret;
speed_fec_capa = calloc(num, sizeof(*speed_fec_capa));
if (speed_fec_capa == NULL) {
- printf("Failed to alloc FEC capability buffer\n");
+ fprintf(stderr, "Failed to alloc FEC capability buffer\n");
return;
}
ret = rte_eth_fec_get_capability(res->cmd_pid, speed_fec_capa, num);
if (ret < 0) {
- printf("Error getting FEC capability: %d\n", ret);
+ fprintf(stderr, "Error getting FEC capability: %d\n", ret);
goto out;
}
int ret;
if (!rte_eth_dev_is_valid_port(res->cmd_pid)) {
- printf("Invalid port id %u\n", res->cmd_pid);
+ fprintf(stderr, "Invalid port id %u\n", res->cmd_pid);
return;
}
ret = rte_eth_fec_get(res->cmd_pid, &mode);
if (ret == -ENOTSUP) {
- printf("Function not implemented\n");
+ fprintf(stderr, "Function not implemented\n");
return;
} else if (ret < 0) {
- printf("Get FEC mode failed\n");
+ fprintf(stderr, "Get FEC mode failed\n");
return;
}
{
struct cmd_set_port_fec_mode *res = parsed_result;
uint16_t port_id = res->port_id;
- uint32_t mode;
+ uint32_t fec_capa;
int ret;
- ret = parse_fec_mode(res->fec_value, &mode);
+ ret = parse_fec_mode(res->fec_value, &fec_capa);
if (ret < 0) {
- printf("Unknown fec mode: %s for Port %d\n", res->fec_value,
- port_id);
+ fprintf(stderr, "Unknown fec mode: %s for port %d\n",
+ res->fec_value, port_id);
return;
}
- ret = rte_eth_fec_set(port_id, mode);
+ ret = rte_eth_fec_set(port_id, fec_capa);
if (ret == -ENOTSUP) {
- printf("Function not implemented\n");
+ fprintf(stderr, "Function not implemented\n");
return;
} else if (ret < 0) {
- printf("Set FEC mode failed\n");
+ fprintf(stderr, "Set FEC mode failed\n");
return;
}
}
int rc;
if (!rte_eth_dev_is_valid_port(res->cmd_pid)) {
- printf("invalid port id %u\n", res->cmd_pid);
+ fprintf(stderr, "invalid port id %u\n", res->cmd_pid);
return;
}
rc = rte_eth_rx_descriptor_status(res->cmd_pid, res->cmd_qid,
res->cmd_did);
if (rc < 0) {
- printf("Invalid input: queue id = %d, desc id = %d\n",
- res->cmd_qid, res->cmd_did);
+ fprintf(stderr,
+ "Invalid input: queue id = %d, desc id = %d\n",
+ res->cmd_qid, res->cmd_did);
return;
}
if (rc == RTE_ETH_RX_DESC_AVAIL)
rc = rte_eth_tx_descriptor_status(res->cmd_pid, res->cmd_qid,
res->cmd_did);
if (rc < 0) {
- printf("Invalid input: queue id = %d, desc id = %d\n",
- res->cmd_qid, res->cmd_did);
+ fprintf(stderr,
+ "Invalid input: queue id = %d, desc id = %d\n",
+ res->cmd_qid, res->cmd_did);
return;
}
if (rc == RTE_ETH_TX_DESC_FULL)
int rc;
if (!rte_eth_dev_is_valid_port(res->cmd_pid)) {
- printf("invalid port id %u\n", res->cmd_pid);
+ fprintf(stderr, "invalid port id %u\n", res->cmd_pid);
return;
}
rc = rte_eth_rx_queue_count(res->cmd_pid, res->cmd_qid);
if (rc < 0) {
- printf("Invalid queueid = %d\n", res->cmd_qid);
+ fprintf(stderr, "Invalid queueid = %d\n", res->cmd_qid);
return;
}
printf("Used desc count = %d\n", rc);
ret = rte_eth_dev_get_supported_ptypes(port_id, RTE_PTYPE_ALL_MASK,
NULL, 0);
if (ret <= 0) {
- printf("Port %d doesn't support any ptypes.\n", port_id);
+ fprintf(stderr, "Port %d doesn't support any ptypes.\n",
+ port_id);
return;
}
ret = rte_eth_dev_set_ptypes(port_id, ptype_mask, ptypes, ret);
if (ret < 0) {
- printf("Unable to set requested ptypes for Port %d\n", port_id);
+ fprintf(stderr, "Unable to set requested ptypes for Port %d\n",
+ port_id);
return;
}
(cmdline_parse_inst_t *)&cmd_link_flow_control_set_xon,
(cmdline_parse_inst_t *)&cmd_link_flow_control_set_macfwd,
(cmdline_parse_inst_t *)&cmd_link_flow_control_set_autoneg,
+ (cmdline_parse_inst_t *)&cmd_link_flow_control_show,
(cmdline_parse_inst_t *)&cmd_priority_flow_control_set,
(cmdline_parse_inst_t *)&cmd_config_dcb,
(cmdline_parse_inst_t *)&cmd_read_reg,
(cmdline_parse_inst_t *)&cmd_showport_rss_hash,
(cmdline_parse_inst_t *)&cmd_showport_rss_hash_key,
(cmdline_parse_inst_t *)&cmd_config_rss_hash_key,
+ (cmdline_parse_inst_t *)&cmd_cleanup_txq_mbufs,
(cmdline_parse_inst_t *)&cmd_dump,
(cmdline_parse_inst_t *)&cmd_dump_one,
#ifdef RTE_NET_I40E
(cmdline_parse_inst_t *)&cmd_enable_port_meter,
(cmdline_parse_inst_t *)&cmd_disable_port_meter,
(cmdline_parse_inst_t *)&cmd_del_port_meter,
+ (cmdline_parse_inst_t *)&cmd_del_port_meter_policy,
(cmdline_parse_inst_t *)&cmd_set_port_meter_profile,
(cmdline_parse_inst_t *)&cmd_set_port_meter_dscp_table,
(cmdline_parse_inst_t *)&cmd_set_port_meter_stats_mask,
cl = cmdline_file_new(main_ctx, "testpmd> ", filename);
if (cl == NULL) {
- printf("Failed to create file based cmdline context: %s\n",
- filename);
+ fprintf(stderr,
+ "Failed to create file based cmdline context: %s\n",
+ filename);
return;
}
ret = atexit(prompt_exit);
if (ret != 0)
- printf("Cannot set exit function for cmdline\n");
+ fprintf(stderr, "Cannot set exit function for cmdline\n");
cmdline_interact(testpmd_cl);
if (ret != 0)
git.droids-corp.org / dpdk.git / blobdiff