/*-
* BSD LICENSE
*
- * Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
*
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
* are met:
*
- * * Redistributions of source code must retain the above copyright
+ * * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
* distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
*/
#include <errno.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_string_fns.h>
+#ifdef RTE_LIBRTE_CMDLINE
#include <cmdline_parse.h>
#include <cmdline_parse_etheraddr.h>
+#endif
#include "testpmd.h"
static void
usage(char* progname)
{
- printf("usage: %s [--interactive|-i] [--help|-h] | ["
+ printf("usage: %s "
+#ifdef RTE_LIBRTE_CMDLINE
+ "[--interactive|-i] "
+#endif
+ "[--help|-h] | ["
"--coremask=COREMASK --portmask=PORTMASK --numa "
"--mbuf-size= | --total-num-mbufs= | "
"--nb-cores= | --nb-ports= | "
+#ifdef RTE_LIBRTE_CMDLINE
"--eth-peers-configfile= | "
"--eth-peer=X,M:M:M:M:M:M | "
+#endif
"--pkt-filter-mode= |"
"--rss-ip | --rss-udp | "
"--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
"--txpt= | --txht= | --txwt= | --txfreet= | "
"--txrst= | --txqflags= ]\n",
progname);
+#ifdef RTE_LIBRTE_CMDLINE
printf(" --interactive: run in interactive mode.\n");
+#endif
printf(" --help: display this message and quit.\n");
printf(" --nb-cores=N: set the number of forwarding cores "
"(1 <= N <= %d).\n", nb_lcores);
"specify the socket on which the TX/RX rings for "
"the port will be allocated "
"(flag: 1 for RX; 2 for TX; 3 for RX and TX).\n");
- printf(" --socket-num=N: set socket from which all memory is allocated "
+ printf(" --socket-num=N: set socket from which all memory is allocated "
"in NUMA mode.\n");
printf(" --mbuf-size=N: set the data size of mbuf to N bytes.\n");
printf(" --total-num-mbufs=N: set the number of mbufs to be allocated "
"in mbuf pools.\n");
printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
+#ifdef RTE_LIBRTE_CMDLINE
printf(" --eth-peers-configfile=name: config file with ethernet addresses "
"of peer ports.\n");
printf(" --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer "
"port (0 <= X < %d).\n", RTE_MAX_ETHPORTS);
+#endif
printf(" --pkt-filter-mode=N: set Flow Director mode "
"(N: none (default mode) or signature or perfect).\n");
printf(" --pkt-filter-report-hash=N: set Flow Director report mode "
printf(" --rx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
"rx queues statistics counters mapping "
"(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
+ printf(" --no-flush-rx: Don't flush RX streams before forwarding."
+ " Used mainly with PCAP drivers.\n");
}
+#ifdef RTE_LIBRTE_CMDLINE
static int
init_peer_eth_addrs(char *config_filename)
{
nb_peer_eth_addrs = (portid_t) i;
return 0;
}
+#endif
/*
* Parse the coremask given as argument (hexadecimal string) and set
static struct option lgopts[] = {
{ "help", 0, 0, 0 },
+#ifdef RTE_LIBRTE_CMDLINE
{ "interactive", 0, 0, 0 },
{ "eth-peers-configfile", 1, 0, 0 },
{ "eth-peer", 1, 0, 0 },
+#endif
{ "ports", 1, 0, 0 },
{ "nb-cores", 1, 0, 0 },
{ "nb-ports", 1, 0, 0 },
{ "coremask", 1, 0, 0 },
{ "portmask", 1, 0, 0 },
{ "numa", 0, 0, 0 },
+ { "mp-anon", 0, 0, 0 },
{ "port-numa-config", 1, 0, 0 },
{ "ring-numa-config", 1, 0, 0 },
{ "socket-num", 1, 0, 0 },
{ "rxfreet", 1, 0, 0 },
{ "tx-queue-stats-mapping", 1, 0, 0 },
{ "rx-queue-stats-mapping", 1, 0, 0 },
+ { "no-flush-rx", 0, 0, 0 },
{ 0, 0, 0, 0 },
};
argvopt = argv;
- while ((opt = getopt_long(argc, argvopt, "ih",
+#ifdef RTE_LIBRTE_CMDLINE
+#define SHORTOPTS "ih"
+#else
+#define SHORTOPTS "h"
+#endif
+ while ((opt = getopt_long(argc, argvopt, SHORTOPTS,
lgopts, &opt_idx)) != EOF) {
switch (opt) {
+#ifdef RTE_LIBRTE_CMDLINE
case 'i':
printf("Interactive-mode selected\n");
interactive = 1;
break;
+#endif
case 0: /*long options */
if (!strcmp(lgopts[opt_idx].name, "help")) {
usage(argv[0]);
rte_exit(EXIT_SUCCESS, "Displayed help\n");
}
+#ifdef RTE_LIBRTE_CMDLINE
if (!strcmp(lgopts[opt_idx].name, "interactive")) {
printf("Interactive-mode selected\n");
interactive = 1;
peer_addr[c];
nb_peer_eth_addrs++;
}
+#endif
if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
n = atoi(optarg);
if (n > 0 && n <= nb_ports)
memset(rxring_numa,NUMA_NO_CONFIG,RTE_MAX_ETHPORTS);
memset(txring_numa,NUMA_NO_CONFIG,RTE_MAX_ETHPORTS);
}
+ if (!strcmp(lgopts[opt_idx].name, "mp-anon")) {
+ mp_anon = 1;
+ }
if (!strcmp(lgopts[opt_idx].name, "port-numa-config")) {
if (parse_portnuma_config(optarg))
rte_exit(EXIT_FAILURE,
port_topology = PORT_TOPOLOGY_PAIRED;
else if (!strcmp(optarg, "chained"))
port_topology = PORT_TOPOLOGY_CHAINED;
+ else if (!strcmp(optarg, "loop"))
+ port_topology = PORT_TOPOLOGY_LOOP;
else
rte_exit(EXIT_FAILURE, "port-topology %s invalid -"
" must be: paired or chained \n",
"invalid RX queue statistics mapping config entered\n");
}
}
+ if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
+ no_flush_rx = 1;
+
break;
case 'h':
usage(argv[0]);