-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2017 Intel Corporation
*/
#include <stdarg.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <errno.h>
+#include <stdbool.h>
#include <sys/queue.h>
#include <sys/stat.h>
#include <rte_cycles.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
#include <rte_launch.h>
#include <rte_eal.h>
#include <rte_alarm.h>
#include <rte_mempool.h>
#include <rte_malloc.h>
#include <rte_mbuf.h>
+#include <rte_mbuf_pool_ops.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_ether.h>
#include "testpmd.h"
uint16_t verbose_level = 0; /**< Silent by default. */
+int testpmd_logtype; /**< Log type for testpmd logs */
/* use master core for command line ? */
uint8_t interactive = 0;
*/
uint8_t mp_anon = 0;
+/*
+ * Store specified sockets on which memory pool to be used by ports
+ * is allocated.
+ */
+uint8_t port_numa[RTE_MAX_ETHPORTS];
+
+/*
+ * Store specified sockets on which RX ring to be used by ports
+ * is allocated.
+ */
+uint8_t rxring_numa[RTE_MAX_ETHPORTS];
+
+/*
+ * Store specified sockets on which TX ring to be used by ports
+ * is allocated.
+ */
+uint8_t txring_numa[RTE_MAX_ETHPORTS];
+
/*
* Record the Ethernet address of peer target ports to which packets are
* forwarded.
/*
* Configurable number of RX/TX ring descriptors.
+ * Defaults are supplied by drivers via ethdev.
*/
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 0
+#define RTE_TEST_TX_DESC_DEFAULT 0
uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; /**< Number of RX descriptors. */
uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; /**< Number of TX descriptors. */
*/
int16_t tx_rs_thresh = RTE_PMD_PARAM_UNSET;
-/*
- * Configurable value of TX queue flags.
- */
-int32_t txq_flags = RTE_PMD_PARAM_UNSET;
-
/*
* Receive Side Scaling (RSS) configuration.
*/
*/
uint8_t rmv_interrupt = 1; /* enabled by default */
+uint8_t hot_plug = 0; /**< hotplug disabled by default. */
+
/*
* Display or mask ether events
* Default to all events except VF_MBOX
(UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) |
(UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) |
(UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
+ (UINT32_C(1) << RTE_ETH_EVENT_IPSEC) |
(UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
(UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV);
+/*
+ * Decide if all memory are locked for performance.
+ */
+int do_mlockall = 0;
/*
* NIC bypass mode configuration options.
*/
struct rte_eth_rxmode rx_mode = {
.max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */
- .split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled. */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled. */
- .hw_vlan_filter = 1, /**< VLAN filtering enabled. */
- .hw_vlan_strip = 1, /**< VLAN strip enabled. */
- .hw_vlan_extend = 0, /**< Extended VLAN disabled. */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled. */
- .hw_strip_crc = 1, /**< CRC stripping by hardware enabled. */
- .hw_timestamp = 0, /**< HW timestamp enabled. */
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
+ .ignore_offload_bitfield = 1,
+};
+
+struct rte_eth_txmode tx_mode = {
+ .offloads = DEV_TX_OFFLOAD_MBUF_FAST_FREE,
};
struct rte_fdir_conf fdir_conf = {
.pballoc = RTE_FDIR_PBALLOC_64K,
.status = RTE_FDIR_REPORT_STATUS,
.mask = {
- .vlan_tci_mask = 0x0,
+ .vlan_tci_mask = 0xFFEF,
.ipv4_mask = {
.src_ip = 0xFFFFFFFF,
.dst_ip = 0xFFFFFFFF,
static int eth_event_callback(portid_t port_id,
enum rte_eth_event_type type,
void *param, void *ret_param);
+static void eth_dev_event_callback(char *device_name,
+ enum rte_dev_event_type type,
+ void *param);
+static int eth_dev_event_callback_register(void);
+static int eth_dev_event_callback_unregister(void);
+
/*
* Check if all the ports are started.
mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size;
mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name));
- RTE_LOG(INFO, USER1,
+ TESTPMD_LOG(INFO,
"create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n",
pool_name, nb_mbuf, mbuf_seg_size, socket_id);
rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL);
} else {
/* wrapper to rte_mempool_create() */
+ TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
+ rte_mbuf_best_mempool_ops());
rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
mb_mempool_cache, 0, mbuf_seg_size, socket_id);
}
return 0;
}
+/*
+ * Get the allowed maximum number of RX queues.
+ * *pid return the port id which has minimal value of
+ * max_rx_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_rxq(portid_t *pid)
+{
+ queueid_t allowed_max_rxq = MAX_QUEUE_ID;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ rte_eth_dev_info_get(pi, &dev_info);
+ if (dev_info.max_rx_queues < allowed_max_rxq) {
+ allowed_max_rxq = dev_info.max_rx_queues;
+ *pid = pi;
+ }
+ }
+ return allowed_max_rxq;
+}
+
+/*
+ * Check input rxq is valid or not.
+ * If input rxq is not greater than any of maximum number
+ * of RX queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_rxq(queueid_t rxq)
+{
+ queueid_t allowed_max_rxq;
+ portid_t pid = 0;
+
+ allowed_max_rxq = get_allowed_max_nb_rxq(&pid);
+ if (rxq > allowed_max_rxq) {
+ printf("Fail: input rxq (%u) can't be greater "
+ "than max_rx_queues (%u) of port %u\n",
+ rxq,
+ allowed_max_rxq,
+ pid);
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Get the allowed maximum number of TX queues.
+ * *pid return the port id which has minimal value of
+ * max_tx_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_txq(portid_t *pid)
+{
+ queueid_t allowed_max_txq = MAX_QUEUE_ID;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ rte_eth_dev_info_get(pi, &dev_info);
+ if (dev_info.max_tx_queues < allowed_max_txq) {
+ allowed_max_txq = dev_info.max_tx_queues;
+ *pid = pi;
+ }
+ }
+ return allowed_max_txq;
+}
+
+/*
+ * Check input txq is valid or not.
+ * If input txq is not greater than any of maximum number
+ * of TX queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_txq(queueid_t txq)
+{
+ queueid_t allowed_max_txq;
+ portid_t pid = 0;
+
+ allowed_max_txq = get_allowed_max_nb_txq(&pid);
+ if (txq > allowed_max_txq) {
+ printf("Fail: input txq (%u) can't be greater "
+ "than max_tx_queues (%u) of port %u\n",
+ txq,
+ allowed_max_txq,
+ pid);
+ return -1;
+ }
+ return 0;
+}
+
static void
init_config(void)
{
uint8_t port_per_socket[RTE_MAX_NUMA_NODES];
struct rte_gro_param gro_param;
uint32_t gso_types;
+ int k;
memset(port_per_socket,0,RTE_MAX_NUMA_NODES);
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
+ /* Apply default TxRx configuration for all ports */
+ port->dev_conf.txmode = tx_mode;
+ port->dev_conf.rxmode = rx_mode;
rte_eth_dev_info_get(pid, &port->dev_info);
+ if (!(port->dev_info.rx_offload_capa &
+ DEV_RX_OFFLOAD_CRC_STRIP))
+ port->dev_conf.rxmode.offloads &=
+ ~DEV_RX_OFFLOAD_CRC_STRIP;
+ if (!(port->dev_info.tx_offload_capa &
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE))
+ port->dev_conf.txmode.offloads &=
+ ~DEV_TX_OFFLOAD_MBUF_FAST_FREE;
if (numa_support) {
if (port_numa[pid] != NUMA_NO_CONFIG)
port_per_socket[port_numa[pid]]++;
}
}
+ /* Apply Rx offloads configuration */
+ for (k = 0; k < port->dev_info.max_rx_queues; k++)
+ port->rx_conf[k].offloads =
+ port->dev_conf.rxmode.offloads;
+ /* Apply Tx offloads configuration */
+ for (k = 0; k < port->dev_info.max_tx_queues; k++)
+ port->tx_conf[k].offloads =
+ port->dev_conf.txmode.offloads;
+
/* set flag to initialize port/queue */
port->need_reconfig = 1;
port->need_reconfig_queues = 1;
/* init new */
nb_fwd_streams = nb_fwd_streams_new;
- fwd_streams = rte_zmalloc("testpmd: fwd_streams",
- sizeof(struct fwd_stream *) * nb_fwd_streams, RTE_CACHE_LINE_SIZE);
- if (fwd_streams == NULL)
- rte_exit(EXIT_FAILURE, "rte_zmalloc(%d (struct fwd_stream *)) "
- "failed\n", nb_fwd_streams);
+ if (nb_fwd_streams) {
+ fwd_streams = rte_zmalloc("testpmd: fwd_streams",
+ sizeof(struct fwd_stream *) * nb_fwd_streams,
+ RTE_CACHE_LINE_SIZE);
+ if (fwd_streams == NULL)
+ rte_exit(EXIT_FAILURE, "rte_zmalloc(%d"
+ " (struct fwd_stream *)) failed\n",
+ nb_fwd_streams);
- for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
- fwd_streams[sm_id] = rte_zmalloc("testpmd: struct fwd_stream",
- sizeof(struct fwd_stream), RTE_CACHE_LINE_SIZE);
- if (fwd_streams[sm_id] == NULL)
- rte_exit(EXIT_FAILURE, "rte_zmalloc(struct fwd_stream)"
- " failed\n");
+ for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
+ fwd_streams[sm_id] = rte_zmalloc("testpmd:"
+ " struct fwd_stream", sizeof(struct fwd_stream),
+ RTE_CACHE_LINE_SIZE);
+ if (fwd_streams[sm_id] == NULL)
+ rte_exit(EXIT_FAILURE, "rte_zmalloc"
+ "(struct fwd_stream) failed\n");
+ }
}
return 0;
pktnb_stats[1] = pktnb_stats[0];
burst_stats[0] = nb_burst;
pktnb_stats[0] = nb_pkt;
+ } else if (nb_burst > burst_stats[1]) {
+ burst_stats[1] = nb_burst;
+ pktnb_stats[1] = nb_pkt;
}
}
if (total_burst == 0)
uint64_t tics_per_1sec;
uint64_t tics_datum;
uint64_t tics_current;
- uint8_t idx_port, cnt_ports;
+ uint16_t idx_port;
- cnt_ports = rte_eth_dev_count();
tics_datum = rte_rdtsc();
tics_per_1sec = rte_get_timer_hz();
#endif
tics_current = rte_rdtsc();
if (tics_current - tics_datum >= tics_per_1sec) {
/* Periodic bitrate calculation */
- for (idx_port = 0;
- idx_port < cnt_ports;
- idx_port++)
+ RTE_ETH_FOREACH_DEV(idx_port)
rte_stats_bitrate_calc(bitrate_data,
idx_port);
tics_datum = tics_current;
}
}
+/*
+ * Update the forward ports list.
+ */
+void
+update_fwd_ports(portid_t new_pid)
+{
+ unsigned int i;
+ unsigned int new_nb_fwd_ports = 0;
+ int move = 0;
+
+ for (i = 0; i < nb_fwd_ports; ++i) {
+ if (port_id_is_invalid(fwd_ports_ids[i], DISABLED_WARN))
+ move = 1;
+ else if (move)
+ fwd_ports_ids[new_nb_fwd_ports++] = fwd_ports_ids[i];
+ else
+ new_nb_fwd_ports++;
+ }
+ if (new_pid < RTE_MAX_ETHPORTS)
+ fwd_ports_ids[new_nb_fwd_ports++] = new_pid;
+
+ nb_fwd_ports = new_nb_fwd_ports;
+ nb_cfg_ports = new_nb_fwd_ports;
+}
+
/*
* Launch packet forwarding configuration.
*/
return;
}
- if (init_fwd_streams() < 0) {
- printf("Fail from init_fwd_streams()\n");
- return;
- }
if(dcb_test) {
for (i = 0; i < nb_fwd_ports; i++) {
}
test_done = 0;
+ fwd_config_setup();
+
if(!no_flush_rx)
flush_fwd_rx_queues();
- fwd_config_setup();
pkt_fwd_config_display(&cur_fwd_config);
rxtx_config_display();
return 1;
}
+int
+port_is_stopped(portid_t port_id)
+{
+ struct rte_port *port = &ports[port_id];
+
+ if ((port->port_status != RTE_PORT_STOPPED) &&
+ (port->slave_flag == 0))
+ return 0;
+ return 1;
+}
+
int
all_ports_stopped(void)
{
portid_t pi;
- struct rte_port *port;
RTE_ETH_FOREACH_DEV(pi) {
- port = &ports[pi];
- if ((port->port_status != RTE_PORT_STOPPED) &&
- (port->slave_flag == 0))
+ if (!port_is_stopped(pi))
return 0;
}
port->need_reconfig_queues = 0;
/* setup tx queues */
for (qi = 0; qi < nb_txq; qi++) {
+ port->tx_conf[qi].txq_flags =
+ ETH_TXQ_FLAGS_IGNORE;
if ((numa_support) &&
(txring_numa[pi] != NUMA_NO_CONFIG))
diag = rte_eth_tx_queue_setup(pi, qi,
- nb_txd,txring_numa[pi],
- &(port->tx_conf));
+ port->nb_tx_desc[qi],
+ txring_numa[pi],
+ &(port->tx_conf[qi]));
else
diag = rte_eth_tx_queue_setup(pi, qi,
- nb_txd,port->socket_id,
- &(port->tx_conf));
+ port->nb_tx_desc[qi],
+ port->socket_id,
+ &(port->tx_conf[qi]));
if (diag == 0)
continue;
RTE_PORT_STOPPED) == 0)
printf("Port %d can not be set back "
"to stopped\n", pi);
- printf("Fail to configure port %d tx queues\n", pi);
+ printf("Fail to configure port %d tx queues\n",
+ pi);
/* try to reconfigure queues next time */
port->need_reconfig_queues = 1;
return -1;
}
- /* setup rx queues */
for (qi = 0; qi < nb_rxq; qi++) {
+ /* setup rx queues */
if ((numa_support) &&
(rxring_numa[pi] != NUMA_NO_CONFIG)) {
struct rte_mempool * mp =
}
diag = rte_eth_rx_queue_setup(pi, qi,
- nb_rxd,rxring_numa[pi],
- &(port->rx_conf),mp);
+ port->nb_rx_desc[qi],
+ rxring_numa[pi],
+ &(port->rx_conf[qi]),
+ mp);
} else {
struct rte_mempool *mp =
mbuf_pool_find(port->socket_id);
return -1;
}
diag = rte_eth_rx_queue_setup(pi, qi,
- nb_rxd,port->socket_id,
- &(port->rx_conf), mp);
+ port->nb_rx_desc[qi],
+ port->socket_id,
+ &(port->rx_conf[qi]),
+ mp);
}
if (diag == 0)
continue;
RTE_PORT_STOPPED) == 0)
printf("Port %d can not be set back "
"to stopped\n", pi);
- printf("Fail to configure port %d rx queues\n", pi);
+ printf("Fail to configure port %d rx queues\n",
+ pi);
/* try to reconfigure queues next time */
port->need_reconfig_queues = 1;
return -1;
}
}
- for (event_type = RTE_ETH_EVENT_UNKNOWN;
- event_type < RTE_ETH_EVENT_MAX;
- event_type++) {
- diag = rte_eth_dev_callback_register(pi,
- event_type,
- eth_event_callback,
- NULL);
- if (diag) {
- printf("Failed to setup even callback for event %d\n",
- event_type);
- return -1;
- }
- }
-
/* start port */
if (rte_eth_dev_start(pi) < 0) {
printf("Fail to start port %d\n", pi);
need_check_link_status = 1;
}
+ for (event_type = RTE_ETH_EVENT_UNKNOWN;
+ event_type < RTE_ETH_EVENT_MAX;
+ event_type++) {
+ diag = rte_eth_dev_callback_register(RTE_ETH_ALL,
+ event_type,
+ eth_event_callback,
+ NULL);
+ if (diag) {
+ printf("Failed to setup even callback for event %d\n",
+ event_type);
+ return -1;
+ }
+ }
+
if (need_check_link_status == 1 && !no_link_check)
check_all_ports_link_status(RTE_PORT_ALL);
else if (need_check_link_status == 0)
printf("Done\n");
}
+static int
+eth_dev_event_callback_register(void)
+{
+ int ret;
+
+ /* register the device event callback */
+ ret = rte_dev_event_callback_register(NULL,
+ eth_dev_event_callback, NULL);
+ if (ret) {
+ printf("Failed to register device event callback\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+
+static int
+eth_dev_event_callback_unregister(void)
+{
+ int ret;
+
+ /* unregister the device event callback */
+ ret = rte_dev_event_callback_unregister(NULL,
+ eth_dev_event_callback, NULL);
+ if (ret < 0) {
+ printf("Failed to unregister device event callback\n");
+ return -1;
+ }
+
+ return 0;
+}
+
void
attach_port(char *identifier)
{
reconfig(pi, socket_id);
rte_eth_promiscuous_enable(pi);
- nb_ports = rte_eth_dev_count();
+ nb_ports = rte_eth_dev_count_avail();
ports[pi].port_status = RTE_PORT_STOPPED;
+ update_fwd_ports(pi);
+
printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports);
printf("Done\n");
}
port_flow_flush(port_id);
if (rte_eth_dev_detach(port_id, name)) {
- RTE_LOG(ERR, USER1, "Failed to detach port '%s'\n", name);
+ TESTPMD_LOG(ERR, "Failed to detach port %u\n", port_id);
return;
}
- nb_ports = rte_eth_dev_count();
+ nb_ports = rte_eth_dev_count_avail();
+
+ update_fwd_ports(RTE_MAX_ETHPORTS);
- printf("Port '%s' is detached. Now total ports is %d\n",
- name, nb_ports);
+ printf("Port %u is detached. Now total ports is %d\n",
+ port_id, nb_ports);
printf("Done\n");
return;
}
void
pmd_test_exit(void)
{
+ struct rte_device *device;
portid_t pt_id;
+ int ret;
if (test_done == 0)
stop_packet_forwarding();
fflush(stdout);
stop_port(pt_id);
close_port(pt_id);
+
+ /*
+ * This is a workaround to fix a virtio-user issue that
+ * requires to call clean-up routine to remove existing
+ * socket.
+ * This workaround valid only for testpmd, needs a fix
+ * valid for all applications.
+ * TODO: Implement proper resource cleanup
+ */
+ device = rte_eth_devices[pt_id].device;
+ if (device && !strcmp(device->driver->name, "net_virtio_user"))
+ detach_port(pt_id);
}
}
+
+ if (hot_plug) {
+ ret = rte_dev_event_monitor_stop();
+ if (ret)
+ RTE_LOG(ERR, EAL,
+ "fail to stop device event monitor.");
+
+ ret = eth_dev_event_callback_unregister();
+ if (ret)
+ RTE_LOG(ERR, EAL,
+ "fail to unregister all event callbacks.");
+ }
+
printf("\nBye...\n");
}
static void
rmv_event_callback(void *arg)
{
- struct rte_eth_dev *dev;
+ int need_to_start = 0;
+ int org_no_link_check = no_link_check;
portid_t port_id = (intptr_t)arg;
RTE_ETH_VALID_PORTID_OR_RET(port_id);
- dev = &rte_eth_devices[port_id];
+ if (!test_done && port_is_forwarding(port_id)) {
+ need_to_start = 1;
+ stop_packet_forwarding();
+ }
+ no_link_check = 1;
stop_port(port_id);
+ no_link_check = org_no_link_check;
close_port(port_id);
- printf("removing device %s\n", dev->device->name);
- if (rte_eal_dev_detach(dev->device))
- RTE_LOG(ERR, USER1, "Failed to detach device %s\n",
- dev->device->name);
+ detach_port(port_id);
+ if (need_to_start)
+ start_packet_forwarding(0);
}
/* This function is used by the interrupt thread */
[RTE_ETH_EVENT_QUEUE_STATE] = "Queue state",
[RTE_ETH_EVENT_INTR_RESET] = "Interrupt reset",
[RTE_ETH_EVENT_VF_MBOX] = "VF Mbox",
+ [RTE_ETH_EVENT_IPSEC] = "IPsec",
[RTE_ETH_EVENT_MACSEC] = "MACsec",
[RTE_ETH_EVENT_INTR_RMV] = "device removal",
+ [RTE_ETH_EVENT_NEW] = "device probed",
+ [RTE_ETH_EVENT_DESTROY] = "device released",
[RTE_ETH_EVENT_MAX] = NULL,
};
fflush(stdout);
}
+ if (port_id_is_invalid(port_id, DISABLED_WARN))
+ return 0;
+
switch (type) {
case RTE_ETH_EVENT_INTR_RMV:
if (rte_eal_alarm_set(100000,
return 0;
}
+/* This function is used by the interrupt thread */
+static void
+eth_dev_event_callback(char *device_name, enum rte_dev_event_type type,
+ __rte_unused void *arg)
+{
+ if (type >= RTE_DEV_EVENT_MAX) {
+ fprintf(stderr, "%s called upon invalid event %d\n",
+ __func__, type);
+ fflush(stderr);
+ }
+
+ switch (type) {
+ case RTE_DEV_EVENT_REMOVE:
+ RTE_LOG(ERR, EAL, "The device: %s has been removed!\n",
+ device_name);
+ /* TODO: After finish failure handle, begin to stop
+ * packet forward, stop port, close port, detach port.
+ */
+ break;
+ case RTE_DEV_EVENT_ADD:
+ RTE_LOG(ERR, EAL, "The device: %s has been added!\n",
+ device_name);
+ /* TODO: After finish kernel driver binding,
+ * begin to attach port.
+ */
+ break;
+ default:
+ break;
+ }
+}
+
static int
set_tx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
{
static void
rxtx_port_config(struct rte_port *port)
{
- port->rx_conf = port->dev_info.default_rxconf;
- port->tx_conf = port->dev_info.default_txconf;
+ uint16_t qid;
+
+ for (qid = 0; qid < nb_rxq; qid++) {
+ port->rx_conf[qid] = port->dev_info.default_rxconf;
+
+ /* Check if any Rx parameters have been passed */
+ if (rx_pthresh != RTE_PMD_PARAM_UNSET)
+ port->rx_conf[qid].rx_thresh.pthresh = rx_pthresh;
- /* Check if any RX/TX parameters have been passed */
- if (rx_pthresh != RTE_PMD_PARAM_UNSET)
- port->rx_conf.rx_thresh.pthresh = rx_pthresh;
+ if (rx_hthresh != RTE_PMD_PARAM_UNSET)
+ port->rx_conf[qid].rx_thresh.hthresh = rx_hthresh;
- if (rx_hthresh != RTE_PMD_PARAM_UNSET)
- port->rx_conf.rx_thresh.hthresh = rx_hthresh;
+ if (rx_wthresh != RTE_PMD_PARAM_UNSET)
+ port->rx_conf[qid].rx_thresh.wthresh = rx_wthresh;
- if (rx_wthresh != RTE_PMD_PARAM_UNSET)
- port->rx_conf.rx_thresh.wthresh = rx_wthresh;
+ if (rx_free_thresh != RTE_PMD_PARAM_UNSET)
+ port->rx_conf[qid].rx_free_thresh = rx_free_thresh;
- if (rx_free_thresh != RTE_PMD_PARAM_UNSET)
- port->rx_conf.rx_free_thresh = rx_free_thresh;
+ if (rx_drop_en != RTE_PMD_PARAM_UNSET)
+ port->rx_conf[qid].rx_drop_en = rx_drop_en;
+
+ port->nb_rx_desc[qid] = nb_rxd;
+ }
- if (rx_drop_en != RTE_PMD_PARAM_UNSET)
- port->rx_conf.rx_drop_en = rx_drop_en;
+ for (qid = 0; qid < nb_txq; qid++) {
+ port->tx_conf[qid] = port->dev_info.default_txconf;
- if (tx_pthresh != RTE_PMD_PARAM_UNSET)
- port->tx_conf.tx_thresh.pthresh = tx_pthresh;
+ /* Check if any Tx parameters have been passed */
+ if (tx_pthresh != RTE_PMD_PARAM_UNSET)
+ port->tx_conf[qid].tx_thresh.pthresh = tx_pthresh;
- if (tx_hthresh != RTE_PMD_PARAM_UNSET)
- port->tx_conf.tx_thresh.hthresh = tx_hthresh;
+ if (tx_hthresh != RTE_PMD_PARAM_UNSET)
+ port->tx_conf[qid].tx_thresh.hthresh = tx_hthresh;
- if (tx_wthresh != RTE_PMD_PARAM_UNSET)
- port->tx_conf.tx_thresh.wthresh = tx_wthresh;
+ if (tx_wthresh != RTE_PMD_PARAM_UNSET)
+ port->tx_conf[qid].tx_thresh.wthresh = tx_wthresh;
- if (tx_rs_thresh != RTE_PMD_PARAM_UNSET)
- port->tx_conf.tx_rs_thresh = tx_rs_thresh;
+ if (tx_rs_thresh != RTE_PMD_PARAM_UNSET)
+ port->tx_conf[qid].tx_rs_thresh = tx_rs_thresh;
- if (tx_free_thresh != RTE_PMD_PARAM_UNSET)
- port->tx_conf.tx_free_thresh = tx_free_thresh;
+ if (tx_free_thresh != RTE_PMD_PARAM_UNSET)
+ port->tx_conf[qid].tx_free_thresh = tx_free_thresh;
- if (txq_flags != RTE_PMD_PARAM_UNSET)
- port->tx_conf.txq_flags = txq_flags;
+ port->nb_tx_desc[qid] = nb_txd;
+ }
}
void
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
- port->dev_conf.rxmode = rx_mode;
port->dev_conf.fdir_conf = fdir_conf;
+ rte_eth_dev_info_get(pid, &port->dev_info);
if (nb_rxq > 1) {
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
- port->dev_conf.rx_adv_conf.rss_conf.rss_hf = rss_hf;
+ port->dev_conf.rx_adv_conf.rss_conf.rss_hf =
+ rss_hf & port->dev_info.flow_type_rss_offloads;
} else {
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
port->dev_conf.rx_adv_conf.rss_conf.rss_hf = 0;
struct rte_port *port;
port = &ports[slave_pid];
- return port->slave_flag;
+ if ((rte_eth_devices[slave_pid].data->dev_flags &
+ RTE_ETH_DEV_BONDED_SLAVE) || (port->slave_flag == 1))
+ return 1;
+ return 0;
}
const uint16_t vlan_tags[] = {
/* Enter DCB configuration status */
dcb_config = 1;
+ port_conf.rxmode = rte_port->dev_conf.rxmode;
+ port_conf.txmode = rte_port->dev_conf.txmode;
+
/*set configuration of DCB in vt mode and DCB in non-vt mode*/
retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
if (retval < 0)
return retval;
- port_conf.rxmode.hw_vlan_filter = 1;
+ port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
- /**
- * Write the configuration into the device.
- * Set the numbers of RX & TX queues to 0, so
- * the RX & TX queues will not be setup.
- */
- rte_eth_dev_configure(pid, 0, 0, &port_conf);
+ /* re-configure the device . */
+ rte_eth_dev_configure(pid, nb_rxq, nb_rxq, &port_conf);
rte_eth_dev_info_get(pid, &rte_port->dev_info);
rxtx_port_config(rte_port);
/* VLAN filter */
- rte_port->dev_conf.rxmode.hw_vlan_filter = 1;
+ rte_port->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
for (i = 0; i < RTE_DIM(vlan_tags); i++)
rx_vft_set(pid, vlan_tags[i], 1);
int
main(int argc, char** argv)
{
- int diag;
+ int diag;
portid_t port_id;
+ int ret;
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
if (diag < 0)
rte_panic("Cannot init EAL\n");
- if (mlockall(MCL_CURRENT | MCL_FUTURE)) {
- RTE_LOG(NOTICE, USER1, "mlockall() failed with error \"%s\"\n",
- strerror(errno));
- }
+ testpmd_logtype = rte_log_register("testpmd");
+ if (testpmd_logtype < 0)
+ rte_panic("Cannot register log type");
+ rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
#ifdef RTE_LIBRTE_PDUMP
/* initialize packet capture framework */
rte_pdump_init(NULL);
#endif
- nb_ports = (portid_t) rte_eth_dev_count();
+ nb_ports = (portid_t) rte_eth_dev_count_avail();
if (nb_ports == 0)
- RTE_LOG(WARNING, EAL, "No probed ethernet devices\n");
+ TESTPMD_LOG(WARNING, "No probed ethernet devices\n");
/* allocate port structures, and init them */
init_port();
latencystats_enabled = 0;
#endif
+ /* on FreeBSD, mlockall() is disabled by default */
+#ifdef RTE_EXEC_ENV_BSDAPP
+ do_mlockall = 0;
+#else
+ do_mlockall = 1;
+#endif
+
argc -= diag;
argv += diag;
if (argc > 1)
launch_args_parse(argc, argv);
+ if (do_mlockall && mlockall(MCL_CURRENT | MCL_FUTURE)) {
+ TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n",
+ strerror(errno));
+ }
+
if (tx_first && interactive)
rte_exit(EXIT_FAILURE, "--tx-first cannot be used on "
"interactive mode.\n");
nb_rxq, nb_txq);
init_config();
+
+ if (hot_plug) {
+ /* enable hot plug monitoring */
+ ret = rte_dev_event_monitor_start();
+ if (ret) {
+ rte_errno = EINVAL;
+ return -1;
+ }
+ eth_dev_event_callback_register();
+
+ }
+
if (start_port(RTE_PORT_ALL) != 0)
rte_exit(EXIT_FAILURE, "Start ports failed\n");
git.droids-corp.org / dpdk.git / blobdiff