#include <string.h>
#include <time.h>
#include <fcntl.h>
+#ifndef RTE_EXEC_ENV_WINDOWS
#include <sys/mman.h>
+#endif
#include <sys/types.h>
#include <errno.h>
#include <stdbool.h>
#include <rte_ethdev.h>
#include <rte_dev.h>
#include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_IXGBE_PMD
+#ifdef RTE_NET_IXGBE
#include <rte_pmd_ixgbe.h>
#endif
-#ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIB_PDUMP
#include <rte_pdump.h>
#endif
#include <rte_flow.h>
#include <rte_metrics.h>
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIB_BITRATESTATS
#include <rte_bitrate.h>
#endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
#include <rte_latencystats.h>
#endif
+#ifdef RTE_EXEC_ENV_WINDOWS
+#include <process.h>
+#endif
#include "testpmd.h"
uint16_t verbose_level = 0; /**< Silent by default. */
int testpmd_logtype; /**< Log type for testpmd logs */
-/* use master core for command line ? */
+/* use main core for command line ? */
uint8_t interactive = 0;
uint8_t auto_start = 0;
uint8_t tx_first;
&csum_fwd_engine,
&icmp_echo_engine,
&noisy_vnf_engine,
-#if defined RTE_LIBRTE_PMD_SOFTNIC
- &softnic_fwd_engine,
-#endif
+ &five_tuple_swap_fwd_engine,
#ifdef RTE_LIBRTE_IEEE1588
&ieee1588_fwd_engine,
#endif
+ &shared_rxq_engine,
NULL,
};
-struct rte_mempool *mempools[RTE_MAX_NUMA_NODES];
+struct rte_mempool *mempools[RTE_MAX_NUMA_NODES * MAX_SEGS_BUFFER_SPLIT];
uint16_t mempool_flags;
struct fwd_config cur_fwd_config;
uint32_t burst_tx_delay_time = BURST_TX_WAIT_US;
uint32_t burst_tx_retry_num = BURST_TX_RETRIES;
-uint16_t mbuf_data_size = DEFAULT_MBUF_DATA_SIZE; /**< Mbuf data space size. */
+uint32_t mbuf_data_size_n = 1; /* Number of specified mbuf sizes. */
+uint16_t mbuf_data_size[MAX_SEGS_BUFFER_SPLIT] = {
+ DEFAULT_MBUF_DATA_SIZE
+}; /**< Mbuf data space size. */
uint32_t param_total_num_mbufs = 0; /**< number of mbufs in all pools - if
* specified on command-line. */
uint16_t stats_period; /**< Period to show statistics (disabled by default) */
+/** Extended statistics to show. */
+struct rte_eth_xstat_name *xstats_display;
+
+unsigned int xstats_display_num; /**< Size of extended statistics to show */
+
/*
* In container, it cannot terminate the process which running with 'stats-period'
* option. Set flag to exit stats period loop after received SIGINT/SIGTERM.
*/
uint8_t f_quit;
+/*
+ * Max Rx frame size, set by '--max-pkt-len' parameter.
+ */
+uint32_t max_rx_pkt_len;
+
+/*
+ * Configuration of packet segments used to scatter received packets
+ * if some of split features is configured.
+ */
+uint16_t rx_pkt_seg_lengths[MAX_SEGS_BUFFER_SPLIT];
+uint8_t rx_pkt_nb_segs; /**< Number of segments to split */
+uint16_t rx_pkt_seg_offsets[MAX_SEGS_BUFFER_SPLIT];
+uint8_t rx_pkt_nb_offs; /**< Number of specified offsets */
+
/*
* Configuration of packet segments used by the "txonly" processing engine.
*/
uint8_t txonly_multi_flow;
/**< Whether multiple flows are generated in TXONLY mode. */
+uint32_t tx_pkt_times_inter;
+/**< Timings for send scheduling in TXONLY mode, time between bursts. */
+
+uint32_t tx_pkt_times_intra;
+/**< Timings for send scheduling in TXONLY mode, time between packets. */
+
uint16_t nb_pkt_per_burst = DEF_PKT_BURST; /**< Number of packets per burst. */
+uint16_t nb_pkt_flowgen_clones; /**< Number of Tx packet clones to send in flowgen mode. */
+int nb_flows_flowgen = 1024; /**< Number of flows in flowgen mode. */
uint16_t mb_mempool_cache = DEF_MBUF_CACHE; /**< Size of mbuf mempool cache. */
/* current configuration is in DCB or not,0 means it is not in DCB mode */
uint8_t dcb_config = 0;
-/* Whether the dcb is in testing status */
-uint8_t dcb_test = 0;
-
/*
* Configurable number of RX/TX queues.
*/
/* Clear ptypes on port initialization. */
uint8_t clear_ptypes = true;
+/* Hairpin ports configuration mode. */
+uint16_t hairpin_mode;
+
/* Pretty printing of ethdev events */
static const char * const eth_event_desc[] = {
[RTE_ETH_EVENT_UNKNOWN] = "unknown",
[RTE_ETH_EVENT_INTR_RMV] = "device removal",
[RTE_ETH_EVENT_NEW] = "device probed",
[RTE_ETH_EVENT_DESTROY] = "device released",
+ [RTE_ETH_EVENT_FLOW_AGED] = "flow aged",
[RTE_ETH_EVENT_MAX] = NULL,
};
(UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
(UINT32_C(1) << RTE_ETH_EVENT_IPSEC) |
(UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
- (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV);
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV) |
+ (UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED);
/*
* Decide if all memory are locked for performance.
*/
* NIC bypass mode configuration options.
*/
-#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
+#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS
/* The NIC bypass watchdog timeout. */
uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
#endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
/*
* Set when latency stats is enabled in the commandline
/*
* Ethernet device configuration.
*/
-struct rte_eth_rxmode rx_mode = {
- .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
- /**< Default maximum frame length. */
-};
+struct rte_eth_rxmode rx_mode;
struct rte_eth_txmode tx_mode = {
.offloads = DEV_TX_OFFLOAD_MBUF_FAST_FREE,
volatile int test_done = 1; /* stop packet forwarding when set to 1. */
-struct queue_stats_mappings tx_queue_stats_mappings_array[MAX_TX_QUEUE_STATS_MAPPINGS];
-struct queue_stats_mappings rx_queue_stats_mappings_array[MAX_RX_QUEUE_STATS_MAPPINGS];
+/*
+ * Display zero values by default for xstats
+ */
+uint8_t xstats_hide_zero;
-struct queue_stats_mappings *tx_queue_stats_mappings = tx_queue_stats_mappings_array;
-struct queue_stats_mappings *rx_queue_stats_mappings = rx_queue_stats_mappings_array;
+/*
+ * Measure of CPU cycles disabled by default
+ */
+uint8_t record_core_cycles;
-uint16_t nb_tx_queue_stats_mappings = 0;
-uint16_t nb_rx_queue_stats_mappings = 0;
+/*
+ * Display of RX and TX bursts disabled by default
+ */
+uint8_t record_burst_stats;
/*
- * Display zero values by default for xstats
+ * Number of ports per shared Rx queue group, 0 disable.
*/
-uint8_t xstats_hide_zero;
+uint32_t rxq_share;
unsigned int num_sockets = 0;
unsigned int socket_ids[RTE_MAX_NUMA_NODES];
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIB_BITRATESTATS
/* Bitrate statistics */
struct rte_stats_bitrates *bitrate_data;
lcoreid_t bitrate_lcore_id;
struct gro_status gro_ports[RTE_MAX_ETHPORTS];
uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES;
+/*
+ * hexadecimal bitmask of RX mq mode can be enabled.
+ */
+enum rte_eth_rx_mq_mode rx_mq_mode = ETH_MQ_RX_VMDQ_DCB_RSS;
+
+/*
+ * Used to set forced link speed
+ */
+uint32_t eth_link_speed;
+
+/*
+ * ID of the current process in multi-process, used to
+ * configure the queues to be polled.
+ */
+int proc_id;
+
+/*
+ * Number of processes in multi-process, used to
+ * configure the queues to be polled.
+ */
+unsigned int num_procs = 1;
+
+static void
+eth_rx_metadata_negotiate_mp(uint16_t port_id)
+{
+ uint64_t rx_meta_features = 0;
+ int ret;
+
+ if (!is_proc_primary())
+ return;
+
+ rx_meta_features |= RTE_ETH_RX_METADATA_USER_FLAG;
+ rx_meta_features |= RTE_ETH_RX_METADATA_USER_MARK;
+ rx_meta_features |= RTE_ETH_RX_METADATA_TUNNEL_ID;
+
+ ret = rte_eth_rx_metadata_negotiate(port_id, &rx_meta_features);
+ if (ret == 0) {
+ if (!(rx_meta_features & RTE_ETH_RX_METADATA_USER_FLAG)) {
+ TESTPMD_LOG(DEBUG, "Flow action FLAG will not affect Rx mbufs on port %u\n",
+ port_id);
+ }
+
+ if (!(rx_meta_features & RTE_ETH_RX_METADATA_USER_MARK)) {
+ TESTPMD_LOG(DEBUG, "Flow action MARK will not affect Rx mbufs on port %u\n",
+ port_id);
+ }
+
+ if (!(rx_meta_features & RTE_ETH_RX_METADATA_TUNNEL_ID)) {
+ TESTPMD_LOG(DEBUG, "Flow tunnel offload support might be limited or unavailable on port %u\n",
+ port_id);
+ }
+ } else if (ret != -ENOTSUP) {
+ rte_exit(EXIT_FAILURE, "Error when negotiating Rx meta features on port %u: %s\n",
+ port_id, rte_strerror(-ret));
+ }
+}
+
+static void
+flow_pick_transfer_proxy_mp(uint16_t port_id)
+{
+ struct rte_port *port = &ports[port_id];
+ int ret;
+
+ port->flow_transfer_proxy = port_id;
+
+ if (!is_proc_primary())
+ return;
+
+ ret = rte_flow_pick_transfer_proxy(port_id, &port->flow_transfer_proxy,
+ NULL);
+ if (ret != 0) {
+ fprintf(stderr, "Error picking flow transfer proxy for port %u: %s - ignore\n",
+ port_id, rte_strerror(-ret));
+ }
+}
+
+static int
+eth_dev_configure_mp(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
+ const struct rte_eth_conf *dev_conf)
+{
+ if (is_proc_primary())
+ return rte_eth_dev_configure(port_id, nb_rx_q, nb_tx_q,
+ dev_conf);
+ return 0;
+}
+
+static int
+eth_dev_start_mp(uint16_t port_id)
+{
+ if (is_proc_primary())
+ return rte_eth_dev_start(port_id);
+
+ return 0;
+}
+
+static int
+eth_dev_stop_mp(uint16_t port_id)
+{
+ if (is_proc_primary())
+ return rte_eth_dev_stop(port_id);
+
+ return 0;
+}
+
+static void
+mempool_free_mp(struct rte_mempool *mp)
+{
+ if (is_proc_primary())
+ rte_mempool_free(mp);
+}
+
+static int
+eth_dev_set_mtu_mp(uint16_t port_id, uint16_t mtu)
+{
+ if (is_proc_primary())
+ return rte_eth_dev_set_mtu(port_id, mtu);
+
+ return 0;
+}
+
/* Forward function declarations */
static void setup_attached_port(portid_t pi);
-static void map_port_queue_stats_mapping_registers(portid_t pi,
- struct rte_port *port);
static void check_all_ports_link_status(uint32_t port_mask);
static int eth_event_callback(portid_t port_id,
enum rte_eth_event_type type,
static void dev_event_callback(const char *device_name,
enum rte_dev_event_type type,
void *param);
+static void fill_xstats_display_info(void);
/*
* Check if all the ports are started.
/* Holds the registered mbuf dynamic flags names. */
char dynf_names[64][RTE_MBUF_DYN_NAMESIZE];
+
/*
* Helper function to check if socket is already discovered.
* If yes, return positive value. If not, return zero.
}
socket_ids[num_sockets++] = sock_num;
}
- if (i == rte_get_master_lcore())
+ if (i == rte_get_main_lcore())
continue;
fwd_lcores_cpuids[nb_lc++] = i;
}
set_default_fwd_ports_config();
}
+#ifndef RTE_EXEC_ENV_WINDOWS
/* extremely pessimistic estimation of memory required to create a mempool */
static int
calc_mem_size(uint32_t nb_mbufs, uint32_t mbuf_sz, size_t pgsz, size_t *out)
int ret;
RTE_ETH_FOREACH_DEV(pid) {
- struct rte_eth_dev *dev =
- &rte_eth_devices[pid];
+ struct rte_eth_dev_info dev_info;
- ret = rte_dev_dma_unmap(dev->device, memhdr->addr, 0,
- memhdr->len);
+ ret = eth_dev_info_get_print_err(pid, &dev_info);
+ if (ret != 0) {
+ TESTPMD_LOG(DEBUG,
+ "unable to get device info for port %d on addr 0x%p,"
+ "mempool unmapping will not be performed\n",
+ pid, memhdr->addr);
+ continue;
+ }
+
+ ret = rte_dev_dma_unmap(dev_info.device, memhdr->addr, 0, memhdr->len);
if (ret) {
TESTPMD_LOG(DEBUG,
"unable to DMA unmap addr 0x%p "
"for device %s\n",
- memhdr->addr, dev->data->name);
+ memhdr->addr, dev_info.device->name);
}
}
ret = rte_extmem_unregister(memhdr->addr, memhdr->len);
return;
}
RTE_ETH_FOREACH_DEV(pid) {
- struct rte_eth_dev *dev =
- &rte_eth_devices[pid];
+ struct rte_eth_dev_info dev_info;
- ret = rte_dev_dma_map(dev->device, memhdr->addr, 0,
- memhdr->len);
+ ret = eth_dev_info_get_print_err(pid, &dev_info);
+ if (ret != 0) {
+ TESTPMD_LOG(DEBUG,
+ "unable to get device info for port %d on addr 0x%p,"
+ "mempool mapping will not be performed\n",
+ pid, memhdr->addr);
+ continue;
+ }
+ ret = rte_dev_dma_map(dev_info.device, memhdr->addr, 0, memhdr->len);
if (ret) {
TESTPMD_LOG(DEBUG,
"unable to DMA map addr 0x%p "
"for device %s\n",
- memhdr->addr, dev->data->name);
+ memhdr->addr, dev_info.device->name);
}
}
}
+#endif
static unsigned int
setup_extbuf(uint32_t nb_mbufs, uint16_t mbuf_sz, unsigned int socket_id,
*/
static struct rte_mempool *
mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf,
- unsigned int socket_id)
+ unsigned int socket_id, uint16_t size_idx)
{
char pool_name[RTE_MEMPOOL_NAMESIZE];
struct rte_mempool *rte_mp = NULL;
+#ifndef RTE_EXEC_ENV_WINDOWS
uint32_t mb_size;
mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size;
- mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name));
+#endif
+ mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name), size_idx);
+ if (!is_proc_primary()) {
+ rte_mp = rte_mempool_lookup(pool_name);
+ if (rte_mp == NULL)
+ rte_exit(EXIT_FAILURE,
+ "Get mbuf pool for socket %u failed: %s\n",
+ socket_id, rte_strerror(rte_errno));
+ return rte_mp;
+ }
TESTPMD_LOG(INFO,
"create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n",
mb_mempool_cache, 0, mbuf_seg_size, socket_id);
break;
}
+#ifndef RTE_EXEC_ENV_WINDOWS
case MP_ALLOC_ANON:
{
rte_mp = rte_mempool_create_empty(pool_name, nb_mbuf,
heap_socket);
break;
}
+#endif
case MP_ALLOC_XBUF:
{
struct rte_pktmbuf_extmem *ext_mem;
}
}
+#ifndef RTE_EXEC_ENV_WINDOWS
err:
+#endif
if (rte_mp == NULL) {
rte_exit(EXIT_FAILURE,
"Creation of mbuf pool for socket %u failed: %s\n",
if (new_socket_id(socket_id)) {
if (!warning_once && numa_support)
- printf("Warning: NUMA should be configured manually by"
- " using --port-numa-config and"
- " --ring-numa-config parameters along with"
- " --numa.\n");
+ fprintf(stderr,
+ "Warning: NUMA should be configured manually by using --port-numa-config and --ring-numa-config parameters along with --numa.\n");
warning_once = 1;
return -1;
}
allowed_max_rxq = get_allowed_max_nb_rxq(&pid);
if (rxq > allowed_max_rxq) {
- printf("Fail: input rxq (%u) can't be greater "
- "than max_rx_queues (%u) of port %u\n",
- rxq,
- allowed_max_rxq,
- pid);
+ fprintf(stderr,
+ "Fail: input rxq (%u) can't be greater than max_rx_queues (%u) of port %u\n",
+ rxq, allowed_max_rxq, pid);
return -1;
}
return 0;
allowed_max_txq = get_allowed_max_nb_txq(&pid);
if (txq > allowed_max_txq) {
- printf("Fail: input txq (%u) can't be greater "
- "than max_tx_queues (%u) of port %u\n",
- txq,
- allowed_max_txq,
- pid);
+ fprintf(stderr,
+ "Fail: input txq (%u) can't be greater than max_tx_queues (%u) of port %u\n",
+ txq, allowed_max_txq, pid);
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Get the allowed maximum number of RXDs of every rx queue.
+ * *pid return the port id which has minimal value of
+ * max_rxd in all queues of all ports.
+ */
+static uint16_t
+get_allowed_max_nb_rxd(portid_t *pid)
+{
+ uint16_t allowed_max_rxd = UINT16_MAX;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
+ continue;
+
+ if (dev_info.rx_desc_lim.nb_max < allowed_max_rxd) {
+ allowed_max_rxd = dev_info.rx_desc_lim.nb_max;
+ *pid = pi;
+ }
+ }
+ return allowed_max_rxd;
+}
+
+/*
+ * Get the allowed minimal number of RXDs of every rx queue.
+ * *pid return the port id which has minimal value of
+ * min_rxd in all queues of all ports.
+ */
+static uint16_t
+get_allowed_min_nb_rxd(portid_t *pid)
+{
+ uint16_t allowed_min_rxd = 0;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
+ continue;
+
+ if (dev_info.rx_desc_lim.nb_min > allowed_min_rxd) {
+ allowed_min_rxd = dev_info.rx_desc_lim.nb_min;
+ *pid = pi;
+ }
+ }
+
+ return allowed_min_rxd;
+}
+
+/*
+ * Check input rxd is valid or not.
+ * If input rxd is not greater than any of maximum number
+ * of RXDs of every Rx queues and is not less than any of
+ * minimal number of RXDs of every Rx queues, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_rxd(queueid_t rxd)
+{
+ uint16_t allowed_max_rxd;
+ uint16_t allowed_min_rxd;
+ portid_t pid = 0;
+
+ allowed_max_rxd = get_allowed_max_nb_rxd(&pid);
+ if (rxd > allowed_max_rxd) {
+ fprintf(stderr,
+ "Fail: input rxd (%u) can't be greater than max_rxds (%u) of port %u\n",
+ rxd, allowed_max_rxd, pid);
+ return -1;
+ }
+
+ allowed_min_rxd = get_allowed_min_nb_rxd(&pid);
+ if (rxd < allowed_min_rxd) {
+ fprintf(stderr,
+ "Fail: input rxd (%u) can't be less than min_rxds (%u) of port %u\n",
+ rxd, allowed_min_rxd, pid);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Get the allowed maximum number of TXDs of every rx queues.
+ * *pid return the port id which has minimal value of
+ * max_txd in every tx queue.
+ */
+static uint16_t
+get_allowed_max_nb_txd(portid_t *pid)
+{
+ uint16_t allowed_max_txd = UINT16_MAX;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
+ continue;
+
+ if (dev_info.tx_desc_lim.nb_max < allowed_max_txd) {
+ allowed_max_txd = dev_info.tx_desc_lim.nb_max;
+ *pid = pi;
+ }
+ }
+ return allowed_max_txd;
+}
+
+/*
+ * Get the allowed maximum number of TXDs of every tx queues.
+ * *pid return the port id which has minimal value of
+ * min_txd in every tx queue.
+ */
+static uint16_t
+get_allowed_min_nb_txd(portid_t *pid)
+{
+ uint16_t allowed_min_txd = 0;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
+ continue;
+
+ if (dev_info.tx_desc_lim.nb_min > allowed_min_txd) {
+ allowed_min_txd = dev_info.tx_desc_lim.nb_min;
+ *pid = pi;
+ }
+ }
+
+ return allowed_min_txd;
+}
+
+/*
+ * Check input txd is valid or not.
+ * If input txd is not greater than any of maximum number
+ * of TXDs of every Rx queues, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_txd(queueid_t txd)
+{
+ uint16_t allowed_max_txd;
+ uint16_t allowed_min_txd;
+ portid_t pid = 0;
+
+ allowed_max_txd = get_allowed_max_nb_txd(&pid);
+ if (txd > allowed_max_txd) {
+ fprintf(stderr,
+ "Fail: input txd (%u) can't be greater than max_txds (%u) of port %u\n",
+ txd, allowed_max_txd, pid);
+ return -1;
+ }
+
+ allowed_min_txd = get_allowed_min_nb_txd(&pid);
+ if (txd < allowed_min_txd) {
+ fprintf(stderr,
+ "Fail: input txd (%u) can't be less than min_txds (%u) of port %u\n",
+ txd, allowed_min_txd, pid);
return -1;
}
return 0;
}
+
/*
* Get the allowed maximum number of hairpin queues.
* *pid return the port id which has minimal value of
allowed_max_hairpinq = get_allowed_max_nb_hairpinq(&pid);
if (hairpinq > allowed_max_hairpinq) {
- printf("Fail: input hairpin (%u) can't be greater "
- "than max_hairpin_queues (%u) of port %u\n",
- hairpinq, allowed_max_hairpinq, pid);
+ fprintf(stderr,
+ "Fail: input hairpin (%u) can't be greater than max_hairpin_queues (%u) of port %u\n",
+ hairpinq, allowed_max_hairpinq, pid);
return -1;
}
return 0;
}
+static int
+get_eth_overhead(struct rte_eth_dev_info *dev_info)
+{
+ uint32_t eth_overhead;
+
+ if (dev_info->max_mtu != UINT16_MAX &&
+ dev_info->max_rx_pktlen > dev_info->max_mtu)
+ eth_overhead = dev_info->max_rx_pktlen - dev_info->max_mtu;
+ else
+ eth_overhead = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+ return eth_overhead;
+}
+
+static void
+init_config_port_offloads(portid_t pid, uint32_t socket_id)
+{
+ struct rte_port *port = &ports[pid];
+ int ret;
+ int i;
+
+ eth_rx_metadata_negotiate_mp(pid);
+ flow_pick_transfer_proxy_mp(pid);
+
+ port->dev_conf.txmode = tx_mode;
+ port->dev_conf.rxmode = rx_mode;
+
+ ret = eth_dev_info_get_print_err(pid, &port->dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE, "rte_eth_dev_info_get() failed\n");
+
+ if (!(port->dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE))
+ port->dev_conf.txmode.offloads &=
+ ~DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+
+ /* Apply Rx offloads configuration */
+ for (i = 0; i < port->dev_info.max_rx_queues; i++)
+ port->rx_conf[i].offloads = port->dev_conf.rxmode.offloads;
+ /* Apply Tx offloads configuration */
+ for (i = 0; i < port->dev_info.max_tx_queues; i++)
+ port->tx_conf[i].offloads = port->dev_conf.txmode.offloads;
+
+ if (eth_link_speed)
+ port->dev_conf.link_speeds = eth_link_speed;
+
+ if (max_rx_pkt_len)
+ port->dev_conf.rxmode.mtu = max_rx_pkt_len -
+ get_eth_overhead(&port->dev_info);
+
+ /* set flag to initialize port/queue */
+ port->need_reconfig = 1;
+ port->need_reconfig_queues = 1;
+ port->socket_id = socket_id;
+ port->tx_metadata = 0;
+
+ /*
+ * Check for maximum number of segments per MTU.
+ * Accordingly update the mbuf data size.
+ */
+ if (port->dev_info.rx_desc_lim.nb_mtu_seg_max != UINT16_MAX &&
+ port->dev_info.rx_desc_lim.nb_mtu_seg_max != 0) {
+ uint32_t eth_overhead = get_eth_overhead(&port->dev_info);
+ uint16_t mtu;
+
+ if (rte_eth_dev_get_mtu(pid, &mtu) == 0) {
+ uint16_t data_size = (mtu + eth_overhead) /
+ port->dev_info.rx_desc_lim.nb_mtu_seg_max;
+ uint16_t buffer_size = data_size + RTE_PKTMBUF_HEADROOM;
+
+ if (buffer_size > mbuf_data_size[0]) {
+ mbuf_data_size[0] = buffer_size;
+ TESTPMD_LOG(WARNING,
+ "Configured mbuf size of the first segment %hu\n",
+ mbuf_data_size[0]);
+ }
+ }
+ }
+}
+
static void
init_config(void)
{
portid_t pid;
- struct rte_port *port;
struct rte_mempool *mbp;
unsigned int nb_mbuf_per_pool;
lcoreid_t lc_id;
- uint8_t port_per_socket[RTE_MAX_NUMA_NODES];
struct rte_gro_param gro_param;
uint32_t gso_types;
- uint16_t data_size;
- bool warning = 0;
- int k;
- int ret;
-
- memset(port_per_socket,0,RTE_MAX_NUMA_NODES);
/* Configuration of logical cores. */
fwd_lcores = rte_zmalloc("testpmd: fwd_lcores",
}
RTE_ETH_FOREACH_DEV(pid) {
- port = &ports[pid];
- /* Apply default TxRx configuration for all ports */
- port->dev_conf.txmode = tx_mode;
- port->dev_conf.rxmode = rx_mode;
-
- ret = eth_dev_info_get_print_err(pid, &port->dev_info);
- if (ret != 0)
- rte_exit(EXIT_FAILURE,
- "rte_eth_dev_info_get() failed\n");
+ uint32_t socket_id;
- if (!(port->dev_info.tx_offload_capa &
- DEV_TX_OFFLOAD_MBUF_FAST_FREE))
- port->dev_conf.txmode.offloads &=
- ~DEV_TX_OFFLOAD_MBUF_FAST_FREE;
if (numa_support) {
- if (port_numa[pid] != NUMA_NO_CONFIG)
- port_per_socket[port_numa[pid]]++;
- else {
- uint32_t socket_id = rte_eth_dev_socket_id(pid);
+ socket_id = port_numa[pid];
+ if (port_numa[pid] == NUMA_NO_CONFIG) {
+ socket_id = rte_eth_dev_socket_id(pid);
/*
* if socket_id is invalid,
*/
if (check_socket_id(socket_id) < 0)
socket_id = socket_ids[0];
- port_per_socket[socket_id]++;
- }
- }
-
- /* Apply Rx offloads configuration */
- for (k = 0; k < port->dev_info.max_rx_queues; k++)
- port->rx_conf[k].offloads =
- port->dev_conf.rxmode.offloads;
- /* Apply Tx offloads configuration */
- for (k = 0; k < port->dev_info.max_tx_queues; k++)
- port->tx_conf[k].offloads =
- port->dev_conf.txmode.offloads;
-
- /* set flag to initialize port/queue */
- port->need_reconfig = 1;
- port->need_reconfig_queues = 1;
- port->tx_metadata = 0;
-
- /* Check for maximum number of segments per MTU. Accordingly
- * update the mbuf data size.
- */
- if (port->dev_info.rx_desc_lim.nb_mtu_seg_max != UINT16_MAX &&
- port->dev_info.rx_desc_lim.nb_mtu_seg_max != 0) {
- data_size = rx_mode.max_rx_pkt_len /
- port->dev_info.rx_desc_lim.nb_mtu_seg_max;
-
- if ((data_size + RTE_PKTMBUF_HEADROOM) >
- mbuf_data_size) {
- mbuf_data_size = data_size +
- RTE_PKTMBUF_HEADROOM;
- warning = 1;
}
+ } else {
+ socket_id = (socket_num == UMA_NO_CONFIG) ?
+ 0 : socket_num;
}
+ /* Apply default TxRx configuration for all ports */
+ init_config_port_offloads(pid, socket_id);
}
-
- if (warning)
- TESTPMD_LOG(WARNING, "Configured mbuf size %hu\n",
- mbuf_data_size);
-
/*
* Create pools of mbuf.
* If NUMA support is disabled, create a single pool of mbuf in
}
if (numa_support) {
- uint8_t i;
+ uint8_t i, j;
for (i = 0; i < num_sockets; i++)
- mempools[i] = mbuf_pool_create(mbuf_data_size,
- nb_mbuf_per_pool,
- socket_ids[i]);
+ for (j = 0; j < mbuf_data_size_n; j++)
+ mempools[i * MAX_SEGS_BUFFER_SPLIT + j] =
+ mbuf_pool_create(mbuf_data_size[j],
+ nb_mbuf_per_pool,
+ socket_ids[i], j);
} else {
- if (socket_num == UMA_NO_CONFIG)
- mempools[0] = mbuf_pool_create(mbuf_data_size,
- nb_mbuf_per_pool, 0);
- else
- mempools[socket_num] = mbuf_pool_create
- (mbuf_data_size,
- nb_mbuf_per_pool,
- socket_num);
+ uint8_t i;
+
+ for (i = 0; i < mbuf_data_size_n; i++)
+ mempools[i] = mbuf_pool_create
+ (mbuf_data_size[i],
+ nb_mbuf_per_pool,
+ socket_num == UMA_NO_CONFIG ?
+ 0 : socket_num, i);
}
init_port_config();
*/
for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
mbp = mbuf_pool_find(
- rte_lcore_to_socket_id(fwd_lcores_cpuids[lc_id]));
+ rte_lcore_to_socket_id(fwd_lcores_cpuids[lc_id]), 0);
if (mbp == NULL)
- mbp = mbuf_pool_find(0);
+ mbp = mbuf_pool_find(0, 0);
fwd_lcores[lc_id]->mbp = mbp;
/* initialize GSO context */
fwd_lcores[lc_id]->gso_ctx.direct_pool = mbp;
fwd_lcores[lc_id]->gso_ctx.flag = 0;
}
- /* Configuration of packet forwarding streams. */
- if (init_fwd_streams() < 0)
- rte_exit(EXIT_FAILURE, "FAIL from init_fwd_streams()\n");
-
fwd_config_setup();
/* create a gro context for each lcore */
"rte_gro_ctx_create() failed\n");
}
}
-
-#if defined RTE_LIBRTE_PMD_SOFTNIC
- if (strcmp(cur_fwd_eng->fwd_mode_name, "softnic") == 0) {
- RTE_ETH_FOREACH_DEV(pid) {
- port = &ports[pid];
- const char *driver = port->dev_info.driver_name;
-
- if (strcmp(driver, "net_softnic") == 0)
- port->softport.fwd_lcore_arg = fwd_lcores;
- }
- }
-#endif
-
}
void
reconfig(portid_t new_port_id, unsigned socket_id)
{
- struct rte_port *port;
- int ret;
-
/* Reconfiguration of Ethernet ports. */
- port = &ports[new_port_id];
-
- ret = eth_dev_info_get_print_err(new_port_id, &port->dev_info);
- if (ret != 0)
- return;
-
- /* set flag to initialize port/queue */
- port->need_reconfig = 1;
- port->need_reconfig_queues = 1;
- port->socket_id = socket_id;
-
+ init_config_port_offloads(new_port_id, socket_id);
init_port_config();
}
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
if (nb_rxq > port->dev_info.max_rx_queues) {
- printf("Fail: nb_rxq(%d) is greater than "
- "max_rx_queues(%d)\n", nb_rxq,
- port->dev_info.max_rx_queues);
+ fprintf(stderr,
+ "Fail: nb_rxq(%d) is greater than max_rx_queues(%d)\n",
+ nb_rxq, port->dev_info.max_rx_queues);
return -1;
}
if (nb_txq > port->dev_info.max_tx_queues) {
- printf("Fail: nb_txq(%d) is greater than "
- "max_tx_queues(%d)\n", nb_txq,
- port->dev_info.max_tx_queues);
+ fprintf(stderr,
+ "Fail: nb_txq(%d) is greater than max_tx_queues(%d)\n",
+ nb_txq, port->dev_info.max_tx_queues);
return -1;
}
if (numa_support) {
q = RTE_MAX(nb_rxq, nb_txq);
if (q == 0) {
- printf("Fail: Cannot allocate fwd streams as number of queues is 0\n");
+ fprintf(stderr,
+ "Fail: Cannot allocate fwd streams as number of queues is 0\n");
return -1;
}
nb_fwd_streams_new = (streamid_t)(nb_ports * q);
return 0;
}
-#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
static void
pkt_burst_stats_display(const char *rx_tx, struct pkt_burst_stats *pbs)
{
- unsigned int total_burst;
- unsigned int nb_burst;
- unsigned int burst_stats[3];
- uint16_t pktnb_stats[3];
+ uint64_t total_burst, sburst;
+ uint64_t nb_burst;
+ uint64_t burst_stats[4];
+ uint16_t pktnb_stats[4];
uint16_t nb_pkt;
- int burst_percent[3];
+ int burst_percent[4], sburstp;
+ int i;
/*
* First compute the total number of packet bursts and the
* two highest numbers of bursts of the same number of packets.
*/
- total_burst = 0;
- burst_stats[0] = burst_stats[1] = burst_stats[2] = 0;
- pktnb_stats[0] = pktnb_stats[1] = pktnb_stats[2] = 0;
- for (nb_pkt = 0; nb_pkt < MAX_PKT_BURST; nb_pkt++) {
+ memset(&burst_stats, 0x0, sizeof(burst_stats));
+ memset(&pktnb_stats, 0x0, sizeof(pktnb_stats));
+
+ /* Show stats for 0 burst size always */
+ total_burst = pbs->pkt_burst_spread[0];
+ burst_stats[0] = pbs->pkt_burst_spread[0];
+ pktnb_stats[0] = 0;
+
+ /* Find the next 2 burst sizes with highest occurrences. */
+ for (nb_pkt = 1; nb_pkt < MAX_PKT_BURST; nb_pkt++) {
nb_burst = pbs->pkt_burst_spread[nb_pkt];
+
if (nb_burst == 0)
continue;
+
total_burst += nb_burst;
- if (nb_burst > burst_stats[0]) {
- burst_stats[1] = burst_stats[0];
- pktnb_stats[1] = pktnb_stats[0];
- burst_stats[0] = nb_burst;
- pktnb_stats[0] = nb_pkt;
- } else if (nb_burst > burst_stats[1]) {
+
+ if (nb_burst > burst_stats[1]) {
+ burst_stats[2] = burst_stats[1];
+ pktnb_stats[2] = pktnb_stats[1];
burst_stats[1] = nb_burst;
pktnb_stats[1] = nb_pkt;
+ } else if (nb_burst > burst_stats[2]) {
+ burst_stats[2] = nb_burst;
+ pktnb_stats[2] = nb_pkt;
}
}
if (total_burst == 0)
return;
- burst_percent[0] = (burst_stats[0] * 100) / total_burst;
- printf(" %s-bursts : %u [%d%% of %d pkts", rx_tx, total_burst,
- burst_percent[0], (int) pktnb_stats[0]);
- if (burst_stats[0] == total_burst) {
- printf("]\n");
- return;
- }
- if (burst_stats[0] + burst_stats[1] == total_burst) {
- printf(" + %d%% of %d pkts]\n",
- 100 - burst_percent[0], pktnb_stats[1]);
- return;
- }
- burst_percent[1] = (burst_stats[1] * 100) / total_burst;
- burst_percent[2] = 100 - (burst_percent[0] + burst_percent[1]);
- if ((burst_percent[1] == 0) || (burst_percent[2] == 0)) {
- printf(" + %d%% of others]\n", 100 - burst_percent[0]);
- return;
+
+ printf(" %s-bursts : %"PRIu64" [", rx_tx, total_burst);
+ for (i = 0, sburst = 0, sburstp = 0; i < 4; i++) {
+ if (i == 3) {
+ printf("%d%% of other]\n", 100 - sburstp);
+ return;
+ }
+
+ sburst += burst_stats[i];
+ if (sburst == total_burst) {
+ printf("%d%% of %d pkts]\n",
+ 100 - sburstp, (int) pktnb_stats[i]);
+ return;
+ }
+
+ burst_percent[i] =
+ (double)burst_stats[i] / total_burst * 100;
+ printf("%d%% of %d pkts + ",
+ burst_percent[i], (int) pktnb_stats[i]);
+ sburstp += burst_percent[i];
}
- printf(" + %d%% of %d pkts + %d%% of others]\n",
- burst_percent[1], (int) pktnb_stats[1], burst_percent[2]);
}
-#endif /* RTE_TEST_PMD_RECORD_BURST_STATS */
static void
fwd_stream_stats_display(streamid_t stream_id)
" Rx- bad outer L4 checksum: %-14"PRIu64"\n",
fs->rx_bad_ip_csum, fs->rx_bad_l4_csum,
fs->rx_bad_outer_l4_csum);
+ printf(" RX- bad outer IP checksum: %-14"PRIu64"\n",
+ fs->rx_bad_outer_ip_csum);
} else {
printf("\n");
}
-#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
- pkt_burst_stats_display("RX", &fs->rx_burst_stats);
- pkt_burst_stats_display("TX", &fs->tx_burst_stats);
-#endif
+ if (record_burst_stats) {
+ pkt_burst_stats_display("RX", &fs->rx_burst_stats);
+ pkt_burst_stats_display("TX", &fs->tx_burst_stats);
+ }
}
void
uint64_t rx_bad_ip_csum;
uint64_t rx_bad_l4_csum;
uint64_t rx_bad_outer_l4_csum;
+ uint64_t rx_bad_outer_ip_csum;
} ports_stats[RTE_MAX_ETHPORTS];
uint64_t total_rx_dropped = 0;
uint64_t total_tx_dropped = 0;
uint64_t total_rx_nombuf = 0;
struct rte_eth_stats stats;
-#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
uint64_t fwd_cycles = 0;
-#endif
uint64_t total_recv = 0;
uint64_t total_xmit = 0;
struct rte_port *port;
ports_stats[fs->rx_port].rx_bad_l4_csum += fs->rx_bad_l4_csum;
ports_stats[fs->rx_port].rx_bad_outer_l4_csum +=
fs->rx_bad_outer_l4_csum;
+ ports_stats[fs->rx_port].rx_bad_outer_ip_csum +=
+ fs->rx_bad_outer_ip_csum;
-#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
- fwd_cycles += fs->core_cycles;
-#endif
+ if (record_core_cycles)
+ fwd_cycles += fs->core_cycles;
}
for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
- uint8_t j;
-
pt_id = fwd_ports_ids[i];
port = &ports[pt_id];
printf("\n %s Forward statistics for port %-2d %s\n",
fwd_stats_border, pt_id, fwd_stats_border);
- if (!port->rx_queue_stats_mapping_enabled &&
- !port->tx_queue_stats_mapping_enabled) {
- printf(" RX-packets: %-14"PRIu64
- " RX-dropped: %-14"PRIu64
- "RX-total: %-"PRIu64"\n",
- stats.ipackets, stats.imissed,
- stats.ipackets + stats.imissed);
-
- if (cur_fwd_eng == &csum_fwd_engine)
- printf(" Bad-ipcsum: %-14"PRIu64
- " Bad-l4csum: %-14"PRIu64
- "Bad-outer-l4csum: %-14"PRIu64"\n",
- ports_stats[pt_id].rx_bad_ip_csum,
- ports_stats[pt_id].rx_bad_l4_csum,
- ports_stats[pt_id].rx_bad_outer_l4_csum);
- if (stats.ierrors + stats.rx_nombuf > 0) {
- printf(" RX-error: %-"PRIu64"\n",
- stats.ierrors);
- printf(" RX-nombufs: %-14"PRIu64"\n",
- stats.rx_nombuf);
- }
-
- printf(" TX-packets: %-14"PRIu64
- " TX-dropped: %-14"PRIu64
- "TX-total: %-"PRIu64"\n",
- stats.opackets, ports_stats[pt_id].tx_dropped,
- stats.opackets + ports_stats[pt_id].tx_dropped);
- } else {
- printf(" RX-packets: %14"PRIu64
- " RX-dropped:%14"PRIu64
- " RX-total:%14"PRIu64"\n",
- stats.ipackets, stats.imissed,
- stats.ipackets + stats.imissed);
-
- if (cur_fwd_eng == &csum_fwd_engine)
- printf(" Bad-ipcsum:%14"PRIu64
- " Bad-l4csum:%14"PRIu64
- " Bad-outer-l4csum: %-14"PRIu64"\n",
- ports_stats[pt_id].rx_bad_ip_csum,
- ports_stats[pt_id].rx_bad_l4_csum,
- ports_stats[pt_id].rx_bad_outer_l4_csum);
- if ((stats.ierrors + stats.rx_nombuf) > 0) {
- printf(" RX-error:%"PRIu64"\n", stats.ierrors);
- printf(" RX-nombufs: %14"PRIu64"\n",
- stats.rx_nombuf);
- }
-
- printf(" TX-packets: %14"PRIu64
- " TX-dropped:%14"PRIu64
- " TX-total:%14"PRIu64"\n",
- stats.opackets, ports_stats[pt_id].tx_dropped,
- stats.opackets + ports_stats[pt_id].tx_dropped);
+ printf(" RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64
+ "RX-total: %-"PRIu64"\n", stats.ipackets, stats.imissed,
+ stats.ipackets + stats.imissed);
+
+ if (cur_fwd_eng == &csum_fwd_engine) {
+ printf(" Bad-ipcsum: %-14"PRIu64
+ " Bad-l4csum: %-14"PRIu64
+ "Bad-outer-l4csum: %-14"PRIu64"\n",
+ ports_stats[pt_id].rx_bad_ip_csum,
+ ports_stats[pt_id].rx_bad_l4_csum,
+ ports_stats[pt_id].rx_bad_outer_l4_csum);
+ printf(" Bad-outer-ipcsum: %-14"PRIu64"\n",
+ ports_stats[pt_id].rx_bad_outer_ip_csum);
+ }
+ if (stats.ierrors + stats.rx_nombuf > 0) {
+ printf(" RX-error: %-"PRIu64"\n", stats.ierrors);
+ printf(" RX-nombufs: %-14"PRIu64"\n", stats.rx_nombuf);
}
-#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
- if (ports_stats[pt_id].rx_stream)
- pkt_burst_stats_display("RX",
- &ports_stats[pt_id].rx_stream->rx_burst_stats);
- if (ports_stats[pt_id].tx_stream)
- pkt_burst_stats_display("TX",
+ printf(" TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64
+ "TX-total: %-"PRIu64"\n",
+ stats.opackets, ports_stats[pt_id].tx_dropped,
+ stats.opackets + ports_stats[pt_id].tx_dropped);
+
+ if (record_burst_stats) {
+ if (ports_stats[pt_id].rx_stream)
+ pkt_burst_stats_display("RX",
+ &ports_stats[pt_id].rx_stream->rx_burst_stats);
+ if (ports_stats[pt_id].tx_stream)
+ pkt_burst_stats_display("TX",
&ports_stats[pt_id].tx_stream->tx_burst_stats);
-#endif
-
- if (port->rx_queue_stats_mapping_enabled) {
- printf("\n");
- for (j = 0; j < RTE_ETHDEV_QUEUE_STAT_CNTRS; j++) {
- printf(" Stats reg %2d RX-packets:%14"PRIu64
- " RX-errors:%14"PRIu64
- " RX-bytes:%14"PRIu64"\n",
- j, stats.q_ipackets[j],
- stats.q_errors[j], stats.q_ibytes[j]);
- }
- printf("\n");
- }
- if (port->tx_queue_stats_mapping_enabled) {
- for (j = 0; j < RTE_ETHDEV_QUEUE_STAT_CNTRS; j++) {
- printf(" Stats reg %2d TX-packets:%14"PRIu64
- " TX-bytes:%14"
- PRIu64"\n",
- j, stats.q_opackets[j],
- stats.q_obytes[j]);
- }
}
printf(" %s--------------------------------%s\n",
printf(" %s++++++++++++++++++++++++++++++++++++++++++++++"
"%s\n",
acc_stats_border, acc_stats_border);
-#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
- if (total_recv > 0)
- printf("\n CPU cycles/packet=%u (total cycles="
- "%"PRIu64" / total RX packets=%"PRIu64")\n",
- (unsigned int)(fwd_cycles / total_recv),
- fwd_cycles, total_recv);
-#endif
+ if (record_core_cycles) {
+#define CYC_PER_MHZ 1E6
+ if (total_recv > 0 || total_xmit > 0) {
+ uint64_t total_pkts = 0;
+ if (strcmp(cur_fwd_eng->fwd_mode_name, "txonly") == 0 ||
+ strcmp(cur_fwd_eng->fwd_mode_name, "flowgen") == 0)
+ total_pkts = total_xmit;
+ else
+ total_pkts = total_recv;
+
+ printf("\n CPU cycles/packet=%.2F (total cycles="
+ "%"PRIu64" / total %s packets=%"PRIu64") at %"PRIu64
+ " MHz Clock\n",
+ (double) fwd_cycles / total_pkts,
+ fwd_cycles, cur_fwd_eng->fwd_mode_name, total_pkts,
+ (uint64_t)(rte_get_tsc_hz() / CYC_PER_MHZ));
+ }
+ }
}
void
fs->rx_bad_ip_csum = 0;
fs->rx_bad_l4_csum = 0;
fs->rx_bad_outer_l4_csum = 0;
+ fs->rx_bad_outer_ip_csum = 0;
-#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
memset(&fs->rx_burst_stats, 0, sizeof(fs->rx_burst_stats));
memset(&fs->tx_burst_stats, 0, sizeof(fs->tx_burst_stats));
-#endif
-#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
fs->core_cycles = 0;
-#endif
}
}
uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0;
uint64_t timer_period;
+ if (num_procs > 1) {
+ printf("multi-process not support for flushing fwd Rx queues, skip the below lines and return.\n");
+ return;
+ }
+
/* convert to number of cycles */
timer_period = rte_get_timer_hz(); /* 1 second timeout */
struct fwd_stream **fsm;
streamid_t nb_fs;
streamid_t sm_id;
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIB_BITRATESTATS
uint64_t tics_per_1sec;
uint64_t tics_datum;
uint64_t tics_current;
do {
for (sm_id = 0; sm_id < nb_fs; sm_id++)
(*pkt_fwd)(fsm[sm_id]);
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIB_BITRATESTATS
if (bitrate_enabled != 0 &&
bitrate_lcore_id == rte_lcore_id()) {
tics_current = rte_rdtsc();
}
}
#endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
if (latencystats_enabled != 0 &&
latencystats_lcore_id == rte_lcore_id())
rte_latencystats_update();
static void
launch_packet_forwarding(lcore_function_t *pkt_fwd_on_lcore)
{
- port_fwd_begin_t port_fwd_begin;
unsigned int i;
unsigned int lc_id;
int diag;
- port_fwd_begin = cur_fwd_config.fwd_eng->port_fwd_begin;
- if (port_fwd_begin != NULL) {
- for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
- (*port_fwd_begin)(fwd_ports_ids[i]);
- }
for (i = 0; i < cur_fwd_config.nb_fwd_lcores; i++) {
lc_id = fwd_lcores_cpuids[i];
if ((interactive == 0) || (lc_id != rte_lcore_id())) {
diag = rte_eal_remote_launch(pkt_fwd_on_lcore,
fwd_lcores[i], lc_id);
if (diag != 0)
- printf("launch lcore %u failed - diag=%d\n",
- lc_id, diag);
+ fprintf(stderr,
+ "launch lcore %u failed - diag=%d\n",
+ lc_id, diag);
}
}
}
{
port_fwd_begin_t port_fwd_begin;
port_fwd_end_t port_fwd_end;
- struct rte_port *port;
unsigned int i;
- portid_t pt_id;
if (strcmp(cur_fwd_eng->fwd_mode_name, "rxonly") == 0 && !nb_rxq)
rte_exit(EXIT_FAILURE, "rxq are 0, cannot use rxonly fwd mode\n");
cur_fwd_eng->fwd_mode_name);
if (all_ports_started() == 0) {
- printf("Not all ports were started\n");
+ fprintf(stderr, "Not all ports were started\n");
return;
}
if (test_done == 0) {
- printf("Packet forwarding already started\n");
+ fprintf(stderr, "Packet forwarding already started\n");
return;
}
+ fwd_config_setup();
- if(dcb_test) {
- for (i = 0; i < nb_fwd_ports; i++) {
- pt_id = fwd_ports_ids[i];
- port = &ports[pt_id];
- if (!port->dcb_flag) {
- printf("In DCB mode, all forwarding ports must "
- "be configured in this mode.\n");
+ pkt_fwd_config_display(&cur_fwd_config);
+ if (!pkt_fwd_shared_rxq_check())
+ return;
+
+ port_fwd_begin = cur_fwd_config.fwd_eng->port_fwd_begin;
+ if (port_fwd_begin != NULL) {
+ for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
+ if (port_fwd_begin(fwd_ports_ids[i])) {
+ fprintf(stderr,
+ "Packet forwarding is not ready\n");
return;
}
}
- if (nb_fwd_lcores == 1) {
- printf("In DCB mode,the nb forwarding cores "
- "should be larger than 1.\n");
- return;
+ }
+
+ if (with_tx_first) {
+ port_fwd_begin = tx_only_engine.port_fwd_begin;
+ if (port_fwd_begin != NULL) {
+ for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
+ if (port_fwd_begin(fwd_ports_ids[i])) {
+ fprintf(stderr,
+ "Packet forwarding is not ready\n");
+ return;
+ }
+ }
}
}
- test_done = 0;
- fwd_config_setup();
+ test_done = 0;
if(!no_flush_rx)
flush_fwd_rx_queues();
- pkt_fwd_config_display(&cur_fwd_config);
rxtx_config_display();
fwd_stats_reset();
- for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
- pt_id = fwd_ports_ids[i];
- port = &ports[pt_id];
- map_port_queue_stats_mapping_registers(pt_id, port);
- }
if (with_tx_first) {
- port_fwd_begin = tx_only_engine.port_fwd_begin;
- if (port_fwd_begin != NULL) {
- for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
- (*port_fwd_begin)(fwd_ports_ids[i]);
- }
while (with_tx_first--) {
launch_packet_forwarding(
run_one_txonly_burst_on_core);
int i;
if (test_done) {
- printf("Packet forwarding not started\n");
+ fprintf(stderr, "Packet forwarding not started\n");
return;
}
printf("Telling cores to stop...");
dev_set_link_up(portid_t pid)
{
if (rte_eth_dev_set_link_up(pid) < 0)
- printf("\nSet link up fail.\n");
+ fprintf(stderr, "\nSet link up fail.\n");
}
void
dev_set_link_down(portid_t pid)
{
if (rte_eth_dev_set_link_down(pid) < 0)
- printf("\nSet link down fail.\n");
+ fprintf(stderr, "\nSet link down fail.\n");
}
static int
/* Configure the Rx and Tx hairpin queues for the selected port. */
static int
-setup_hairpin_queues(portid_t pi)
+setup_hairpin_queues(portid_t pi, portid_t p_pi, uint16_t cnt_pi)
{
queueid_t qi;
struct rte_eth_hairpin_conf hairpin_conf = {
int i;
int diag;
struct rte_port *port = &ports[pi];
+ uint16_t peer_rx_port = pi;
+ uint16_t peer_tx_port = pi;
+ uint32_t manual = 1;
+ uint32_t tx_exp = hairpin_mode & 0x10;
+
+ if (!(hairpin_mode & 0xf)) {
+ peer_rx_port = pi;
+ peer_tx_port = pi;
+ manual = 0;
+ } else if (hairpin_mode & 0x1) {
+ peer_tx_port = rte_eth_find_next_owned_by(pi + 1,
+ RTE_ETH_DEV_NO_OWNER);
+ if (peer_tx_port >= RTE_MAX_ETHPORTS)
+ peer_tx_port = rte_eth_find_next_owned_by(0,
+ RTE_ETH_DEV_NO_OWNER);
+ if (p_pi != RTE_MAX_ETHPORTS) {
+ peer_rx_port = p_pi;
+ } else {
+ uint16_t next_pi;
+
+ /* Last port will be the peer RX port of the first. */
+ RTE_ETH_FOREACH_DEV(next_pi)
+ peer_rx_port = next_pi;
+ }
+ manual = 1;
+ } else if (hairpin_mode & 0x2) {
+ if (cnt_pi & 0x1) {
+ peer_rx_port = p_pi;
+ } else {
+ peer_rx_port = rte_eth_find_next_owned_by(pi + 1,
+ RTE_ETH_DEV_NO_OWNER);
+ if (peer_rx_port >= RTE_MAX_ETHPORTS)
+ peer_rx_port = pi;
+ }
+ peer_tx_port = peer_rx_port;
+ manual = 1;
+ }
for (qi = nb_txq, i = 0; qi < nb_hairpinq + nb_txq; qi++) {
- hairpin_conf.peers[0].port = pi;
+ hairpin_conf.peers[0].port = peer_rx_port;
hairpin_conf.peers[0].queue = i + nb_rxq;
+ hairpin_conf.manual_bind = !!manual;
+ hairpin_conf.tx_explicit = !!tx_exp;
diag = rte_eth_tx_hairpin_queue_setup
(pi, qi, nb_txd, &hairpin_conf);
i++;
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING,
RTE_PORT_STOPPED) == 0)
- printf("Port %d can not be set back "
- "to stopped\n", pi);
- printf("Fail to configure port %d hairpin "
- "queues\n", pi);
+ fprintf(stderr,
+ "Port %d can not be set back to stopped\n", pi);
+ fprintf(stderr, "Fail to configure port %d hairpin queues\n",
+ pi);
/* try to reconfigure queues next time */
port->need_reconfig_queues = 1;
return -1;
}
for (qi = nb_rxq, i = 0; qi < nb_hairpinq + nb_rxq; qi++) {
- hairpin_conf.peers[0].port = pi;
+ hairpin_conf.peers[0].port = peer_tx_port;
hairpin_conf.peers[0].queue = i + nb_txq;
+ hairpin_conf.manual_bind = !!manual;
+ hairpin_conf.tx_explicit = !!tx_exp;
diag = rte_eth_rx_hairpin_queue_setup
(pi, qi, nb_rxd, &hairpin_conf);
i++;
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING,
RTE_PORT_STOPPED) == 0)
- printf("Port %d can not be set back "
- "to stopped\n", pi);
- printf("Fail to configure port %d hairpin "
- "queues\n", pi);
+ fprintf(stderr,
+ "Port %d can not be set back to stopped\n", pi);
+ fprintf(stderr, "Fail to configure port %d hairpin queues\n",
+ pi);
/* try to reconfigure queues next time */
port->need_reconfig_queues = 1;
return -1;
return 0;
}
+/* Configure the Rx with optional split. */
+int
+rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
+ uint16_t nb_rx_desc, unsigned int socket_id,
+ struct rte_eth_rxconf *rx_conf, struct rte_mempool *mp)
+{
+ union rte_eth_rxseg rx_useg[MAX_SEGS_BUFFER_SPLIT] = {};
+ unsigned int i, mp_n;
+ int ret;
+
+ if (rx_pkt_nb_segs <= 1 ||
+ (rx_conf->offloads & RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT) == 0) {
+ rx_conf->rx_seg = NULL;
+ rx_conf->rx_nseg = 0;
+ ret = rte_eth_rx_queue_setup(port_id, rx_queue_id,
+ nb_rx_desc, socket_id,
+ rx_conf, mp);
+ return ret;
+ }
+ for (i = 0; i < rx_pkt_nb_segs; i++) {
+ struct rte_eth_rxseg_split *rx_seg = &rx_useg[i].split;
+ struct rte_mempool *mpx;
+ /*
+ * Use last valid pool for the segments with number
+ * exceeding the pool index.
+ */
+ mp_n = (i > mbuf_data_size_n) ? mbuf_data_size_n - 1 : i;
+ mpx = mbuf_pool_find(socket_id, mp_n);
+ /* Handle zero as mbuf data buffer size. */
+ rx_seg->length = rx_pkt_seg_lengths[i] ?
+ rx_pkt_seg_lengths[i] :
+ mbuf_data_size[mp_n];
+ rx_seg->offset = i < rx_pkt_nb_offs ?
+ rx_pkt_seg_offsets[i] : 0;
+ rx_seg->mp = mpx ? mpx : mp;
+ }
+ rx_conf->rx_nseg = rx_pkt_nb_segs;
+ rx_conf->rx_seg = rx_useg;
+ ret = rte_eth_rx_queue_setup(port_id, rx_queue_id, nb_rx_desc,
+ socket_id, rx_conf, NULL);
+ rx_conf->rx_seg = NULL;
+ rx_conf->rx_nseg = 0;
+ return ret;
+}
+
+static int
+alloc_xstats_display_info(portid_t pi)
+{
+ uint64_t **ids_supp = &ports[pi].xstats_info.ids_supp;
+ uint64_t **prev_values = &ports[pi].xstats_info.prev_values;
+ uint64_t **curr_values = &ports[pi].xstats_info.curr_values;
+
+ if (xstats_display_num == 0)
+ return 0;
+
+ *ids_supp = calloc(xstats_display_num, sizeof(**ids_supp));
+ if (*ids_supp == NULL)
+ goto fail_ids_supp;
+
+ *prev_values = calloc(xstats_display_num,
+ sizeof(**prev_values));
+ if (*prev_values == NULL)
+ goto fail_prev_values;
+
+ *curr_values = calloc(xstats_display_num,
+ sizeof(**curr_values));
+ if (*curr_values == NULL)
+ goto fail_curr_values;
+
+ ports[pi].xstats_info.allocated = true;
+
+ return 0;
+
+fail_curr_values:
+ free(*prev_values);
+fail_prev_values:
+ free(*ids_supp);
+fail_ids_supp:
+ return -ENOMEM;
+}
+
+static void
+free_xstats_display_info(portid_t pi)
+{
+ if (!ports[pi].xstats_info.allocated)
+ return;
+ free(ports[pi].xstats_info.ids_supp);
+ free(ports[pi].xstats_info.prev_values);
+ free(ports[pi].xstats_info.curr_values);
+ ports[pi].xstats_info.allocated = false;
+}
+
+/** Fill helper structures for specified port to show extended statistics. */
+static void
+fill_xstats_display_info_for_port(portid_t pi)
+{
+ unsigned int stat, stat_supp;
+ const char *xstat_name;
+ struct rte_port *port;
+ uint64_t *ids_supp;
+ int rc;
+
+ if (xstats_display_num == 0)
+ return;
+
+ if (pi == (portid_t)RTE_PORT_ALL) {
+ fill_xstats_display_info();
+ return;
+ }
+
+ port = &ports[pi];
+ if (port->port_status != RTE_PORT_STARTED)
+ return;
+
+ if (!port->xstats_info.allocated && alloc_xstats_display_info(pi) != 0)
+ rte_exit(EXIT_FAILURE,
+ "Failed to allocate xstats display memory\n");
+
+ ids_supp = port->xstats_info.ids_supp;
+ for (stat = stat_supp = 0; stat < xstats_display_num; stat++) {
+ xstat_name = xstats_display[stat].name;
+ rc = rte_eth_xstats_get_id_by_name(pi, xstat_name,
+ ids_supp + stat_supp);
+ if (rc != 0) {
+ fprintf(stderr, "No xstat '%s' on port %u - skip it %u\n",
+ xstat_name, pi, stat);
+ continue;
+ }
+ stat_supp++;
+ }
+
+ port->xstats_info.ids_supp_sz = stat_supp;
+}
+
+/** Fill helper structures for all ports to show extended statistics. */
+static void
+fill_xstats_display_info(void)
+{
+ portid_t pi;
+
+ if (xstats_display_num == 0)
+ return;
+
+ RTE_ETH_FOREACH_DEV(pi)
+ fill_xstats_display_info_for_port(pi);
+}
+
int
start_port(portid_t pid)
{
int diag, need_check_link_status = -1;
portid_t pi;
+ portid_t p_pi = RTE_MAX_ETHPORTS;
+ portid_t pl[RTE_MAX_ETHPORTS];
+ portid_t peer_pl[RTE_MAX_ETHPORTS];
+ uint16_t cnt_pi = 0;
+ uint16_t cfg_pi = 0;
+ int peer_pi;
queueid_t qi;
struct rte_port *port;
- struct rte_ether_addr mac_addr;
struct rte_eth_hairpin_cap cap;
if (port_id_is_invalid(pid, ENABLED_WARN))
return 0;
- if(dcb_config)
- dcb_test = 1;
RTE_ETH_FOREACH_DEV(pi) {
if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
continue;
port = &ports[pi];
if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STOPPED,
RTE_PORT_HANDLING) == 0) {
- printf("Port %d is now not stopped\n", pi);
+ fprintf(stderr, "Port %d is now not stopped\n", pi);
continue;
}
if (port->need_reconfig > 0) {
+ struct rte_eth_conf dev_conf;
+ int k;
+
port->need_reconfig = 0;
if (flow_isolate_all) {
int ret = port_flow_isolate(pi, 1);
if (ret) {
- printf("Failed to apply isolated"
- " mode on port %d\n", pi);
+ fprintf(stderr,
+ "Failed to apply isolated mode on port %d\n",
+ pi);
return -1;
}
}
port->socket_id);
if (nb_hairpinq > 0 &&
rte_eth_dev_hairpin_capability_get(pi, &cap)) {
- printf("Port %d doesn't support hairpin "
- "queues\n", pi);
+ fprintf(stderr,
+ "Port %d doesn't support hairpin queues\n",
+ pi);
return -1;
}
+
/* configure port */
- diag = rte_eth_dev_configure(pi, nb_rxq + nb_hairpinq,
+ diag = eth_dev_configure_mp(pi, nb_rxq + nb_hairpinq,
nb_txq + nb_hairpinq,
&(port->dev_conf));
if (diag != 0) {
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
- printf("Port %d can not be set back "
- "to stopped\n", pi);
- printf("Fail to configure port %d\n", pi);
+ fprintf(stderr,
+ "Port %d can not be set back to stopped\n",
+ pi);
+ fprintf(stderr, "Fail to configure port %d\n",
+ pi);
/* try to reconfigure port next time */
port->need_reconfig = 1;
return -1;
}
+ /* get device configuration*/
+ if (0 !=
+ eth_dev_conf_get_print_err(pi, &dev_conf)) {
+ fprintf(stderr,
+ "port %d can not get device configuration\n",
+ pi);
+ return -1;
+ }
+ /* Apply Rx offloads configuration */
+ if (dev_conf.rxmode.offloads !=
+ port->dev_conf.rxmode.offloads) {
+ port->dev_conf.rxmode.offloads |=
+ dev_conf.rxmode.offloads;
+ for (k = 0;
+ k < port->dev_info.max_rx_queues;
+ k++)
+ port->rx_conf[k].offloads |=
+ dev_conf.rxmode.offloads;
+ }
+ /* Apply Tx offloads configuration */
+ if (dev_conf.txmode.offloads !=
+ port->dev_conf.txmode.offloads) {
+ port->dev_conf.txmode.offloads |=
+ dev_conf.txmode.offloads;
+ for (k = 0;
+ k < port->dev_info.max_tx_queues;
+ k++)
+ port->tx_conf[k].offloads |=
+ dev_conf.txmode.offloads;
+ }
}
- if (port->need_reconfig_queues > 0) {
+ if (port->need_reconfig_queues > 0 && is_proc_primary()) {
port->need_reconfig_queues = 0;
/* setup tx queues */
for (qi = 0; qi < nb_txq; qi++) {
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING,
RTE_PORT_STOPPED) == 0)
- printf("Port %d can not be set back "
- "to stopped\n", pi);
- printf("Fail to configure port %d tx queues\n",
- pi);
+ fprintf(stderr,
+ "Port %d can not be set back to stopped\n",
+ pi);
+ fprintf(stderr,
+ "Fail to configure port %d tx queues\n",
+ pi);
/* try to reconfigure queues next time */
port->need_reconfig_queues = 1;
return -1;
if ((numa_support) &&
(rxring_numa[pi] != NUMA_NO_CONFIG)) {
struct rte_mempool * mp =
- mbuf_pool_find(rxring_numa[pi]);
+ mbuf_pool_find
+ (rxring_numa[pi], 0);
if (mp == NULL) {
- printf("Failed to setup RX queue:"
- "No mempool allocation"
- " on the socket %d\n",
+ fprintf(stderr,
+ "Failed to setup RX queue: No mempool allocation on the socket %d\n",
rxring_numa[pi]);
return -1;
}
- diag = rte_eth_rx_queue_setup(pi, qi,
+ diag = rx_queue_setup(pi, qi,
port->nb_rx_desc[qi],
rxring_numa[pi],
&(port->rx_conf[qi]),
mp);
} else {
struct rte_mempool *mp =
- mbuf_pool_find(port->socket_id);
+ mbuf_pool_find
+ (port->socket_id, 0);
if (mp == NULL) {
- printf("Failed to setup RX queue:"
- "No mempool allocation"
- " on the socket %d\n",
+ fprintf(stderr,
+ "Failed to setup RX queue: No mempool allocation on the socket %d\n",
port->socket_id);
return -1;
}
- diag = rte_eth_rx_queue_setup(pi, qi,
+ diag = rx_queue_setup(pi, qi,
port->nb_rx_desc[qi],
port->socket_id,
&(port->rx_conf[qi]),
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING,
RTE_PORT_STOPPED) == 0)
- printf("Port %d can not be set back "
- "to stopped\n", pi);
- printf("Fail to configure port %d rx queues\n",
- pi);
+ fprintf(stderr,
+ "Port %d can not be set back to stopped\n",
+ pi);
+ fprintf(stderr,
+ "Fail to configure port %d rx queues\n",
+ pi);
/* try to reconfigure queues next time */
port->need_reconfig_queues = 1;
return -1;
}
/* setup hairpin queues */
- if (setup_hairpin_queues(pi) != 0)
+ if (setup_hairpin_queues(pi, p_pi, cnt_pi) != 0)
return -1;
}
configure_rxtx_dump_callbacks(verbose_level);
diag = rte_eth_dev_set_ptypes(pi, RTE_PTYPE_UNKNOWN,
NULL, 0);
if (diag < 0)
- printf(
- "Port %d: Failed to disable Ptype parsing\n",
- pi);
+ fprintf(stderr,
+ "Port %d: Failed to disable Ptype parsing\n",
+ pi);
}
+ p_pi = pi;
+ cnt_pi++;
+
/* start port */
- if (rte_eth_dev_start(pi) < 0) {
- printf("Fail to start port %d\n", pi);
+ diag = eth_dev_start_mp(pi);
+ if (diag < 0) {
+ fprintf(stderr, "Fail to start port %d: %s\n",
+ pi, rte_strerror(-diag));
/* Fail to setup rx queue, return */
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
- printf("Port %d can not be set back to "
- "stopped\n", pi);
+ fprintf(stderr,
+ "Port %d can not be set back to stopped\n",
+ pi);
continue;
}
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
- printf("Port %d can not be set into started\n", pi);
+ fprintf(stderr, "Port %d can not be set into started\n",
+ pi);
- if (eth_macaddr_get_print_err(pi, &mac_addr) == 0)
- printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi,
- mac_addr.addr_bytes[0], mac_addr.addr_bytes[1],
- mac_addr.addr_bytes[2], mac_addr.addr_bytes[3],
- mac_addr.addr_bytes[4], mac_addr.addr_bytes[5]);
+ if (eth_macaddr_get_print_err(pi, &port->eth_addr) == 0)
+ printf("Port %d: " RTE_ETHER_ADDR_PRT_FMT "\n", pi,
+ RTE_ETHER_ADDR_BYTES(&port->eth_addr));
/* at least one port started, need checking link status */
need_check_link_status = 1;
+
+ pl[cfg_pi++] = pi;
}
if (need_check_link_status == 1 && !no_link_check)
check_all_ports_link_status(RTE_PORT_ALL);
else if (need_check_link_status == 0)
- printf("Please stop the ports first\n");
+ fprintf(stderr, "Please stop the ports first\n");
+
+ if (hairpin_mode & 0xf) {
+ uint16_t i;
+ int j;
+
+ /* bind all started hairpin ports */
+ for (i = 0; i < cfg_pi; i++) {
+ pi = pl[i];
+ /* bind current Tx to all peer Rx */
+ peer_pi = rte_eth_hairpin_get_peer_ports(pi, peer_pl,
+ RTE_MAX_ETHPORTS, 1);
+ if (peer_pi < 0)
+ return peer_pi;
+ for (j = 0; j < peer_pi; j++) {
+ if (!port_is_started(peer_pl[j]))
+ continue;
+ diag = rte_eth_hairpin_bind(pi, peer_pl[j]);
+ if (diag < 0) {
+ fprintf(stderr,
+ "Error during binding hairpin Tx port %u to %u: %s\n",
+ pi, peer_pl[j],
+ rte_strerror(-diag));
+ return -1;
+ }
+ }
+ /* bind all peer Tx to current Rx */
+ peer_pi = rte_eth_hairpin_get_peer_ports(pi, peer_pl,
+ RTE_MAX_ETHPORTS, 0);
+ if (peer_pi < 0)
+ return peer_pi;
+ for (j = 0; j < peer_pi; j++) {
+ if (!port_is_started(peer_pl[j]))
+ continue;
+ diag = rte_eth_hairpin_bind(peer_pl[j], pi);
+ if (diag < 0) {
+ fprintf(stderr,
+ "Error during binding hairpin Tx port %u to %u: %s\n",
+ peer_pl[j], pi,
+ rte_strerror(-diag));
+ return -1;
+ }
+ }
+ }
+ }
+
+ fill_xstats_display_info_for_port(pid);
printf("Done\n");
return 0;
portid_t pi;
struct rte_port *port;
int need_check_link_status = 0;
-
- if (dcb_test) {
- dcb_test = 0;
- dcb_config = 0;
- }
+ portid_t peer_pl[RTE_MAX_ETHPORTS];
+ int peer_pi;
if (port_id_is_invalid(pid, ENABLED_WARN))
return;
continue;
if (port_is_forwarding(pi) != 0 && test_done == 0) {
- printf("Please remove port %d from forwarding configuration.\n", pi);
+ fprintf(stderr,
+ "Please remove port %d from forwarding configuration.\n",
+ pi);
continue;
}
if (port_is_bonding_slave(pi)) {
- printf("Please remove port %d from bonded device.\n", pi);
+ fprintf(stderr,
+ "Please remove port %d from bonded device.\n",
+ pi);
continue;
}
RTE_PORT_HANDLING) == 0)
continue;
- rte_eth_dev_stop(pi);
+ if (hairpin_mode & 0xf) {
+ int j;
+
+ rte_eth_hairpin_unbind(pi, RTE_MAX_ETHPORTS);
+ /* unbind all peer Tx from current Rx */
+ peer_pi = rte_eth_hairpin_get_peer_ports(pi, peer_pl,
+ RTE_MAX_ETHPORTS, 0);
+ if (peer_pi < 0)
+ continue;
+ for (j = 0; j < peer_pi; j++) {
+ if (!port_is_started(peer_pl[j]))
+ continue;
+ rte_eth_hairpin_unbind(peer_pl[j], pi);
+ }
+ }
+
+ if (port->flow_list)
+ port_flow_flush(pi);
+
+ if (eth_dev_stop_mp(pi) != 0)
+ RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port %u\n",
+ pi);
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
- printf("Port %d can not be set into stopped\n", pi);
+ fprintf(stderr, "Port %d can not be set into stopped\n",
+ pi);
need_check_link_status = 1;
}
if (need_check_link_status && !no_link_check)
continue;
if (port_is_forwarding(pi) != 0 && test_done == 0) {
- printf("Please remove port %d from forwarding configuration.\n", pi);
+ fprintf(stderr,
+ "Please remove port %d from forwarding configuration.\n",
+ pi);
continue;
}
if (port_is_bonding_slave(pi)) {
- printf("Please remove port %d from bonded device.\n", pi);
+ fprintf(stderr,
+ "Please remove port %d from bonded device.\n",
+ pi);
continue;
}
port = &ports[pi];
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_CLOSED, RTE_PORT_CLOSED) == 1) {
- printf("Port %d is already closed\n", pi);
- continue;
- }
-
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_STOPPED, RTE_PORT_HANDLING) == 0) {
- printf("Port %d is now not stopped\n", pi);
+ fprintf(stderr, "Port %d is already closed\n", pi);
continue;
}
- if (port->flow_list)
+ if (is_proc_primary()) {
port_flow_flush(pi);
- rte_eth_dev_close(pi);
-
- remove_invalid_ports();
+ port_flex_item_flush(pi);
+ rte_eth_dev_close(pi);
+ }
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_HANDLING, RTE_PORT_CLOSED) == 0)
- printf("Port %d cannot be set to closed\n", pi);
+ free_xstats_display_info(pi);
}
+ remove_invalid_ports();
printf("Done\n");
}
if ((pid == (portid_t)RTE_PORT_ALL && !all_ports_stopped()) ||
(pid != (portid_t)RTE_PORT_ALL && !port_is_stopped(pid))) {
- printf("Can not reset port(s), please stop port(s) first.\n");
+ fprintf(stderr,
+ "Can not reset port(s), please stop port(s) first.\n");
return;
}
continue;
if (port_is_forwarding(pi) != 0 && test_done == 0) {
- printf("Please remove port %d from forwarding "
- "configuration.\n", pi);
+ fprintf(stderr,
+ "Please remove port %d from forwarding configuration.\n",
+ pi);
continue;
}
if (port_is_bonding_slave(pi)) {
- printf("Please remove port %d from bonded device.\n",
- pi);
+ fprintf(stderr,
+ "Please remove port %d from bonded device.\n",
+ pi);
continue;
}
port->need_reconfig = 1;
port->need_reconfig_queues = 1;
} else {
- printf("Failed to reset port %d. diag=%d\n", pi, diag);
+ fprintf(stderr, "Failed to reset port %d. diag=%d\n",
+ pi, diag);
}
}
printf("Attaching a new port...\n");
if (identifier == NULL) {
- printf("Invalid parameters are specified\n");
+ fprintf(stderr, "Invalid parameters are specified\n");
return;
}
reconfig(pi, socket_id);
ret = rte_eth_promiscuous_enable(pi);
if (ret != 0)
- printf("Error during enabling promiscuous mode for port %u: %s - ignore\n",
+ fprintf(stderr,
+ "Error during enabling promiscuous mode for port %u: %s - ignore\n",
pi, rte_strerror(-ret));
ports_ids[nb_ports++] = pi;
portid_t sibling;
if (dev == NULL) {
- printf("Device already removed\n");
+ fprintf(stderr, "Device already removed\n");
return;
}
printf("Removing a device...\n");
- if (rte_dev_remove(dev) < 0) {
- TESTPMD_LOG(ERR, "Failed to detach device %s\n", dev->name);
- return;
- }
RTE_ETH_FOREACH_DEV_OF(sibling, dev) {
- /* reset mapping between old ports and removed device */
- rte_eth_devices[sibling].device = NULL;
if (ports[sibling].port_status != RTE_PORT_CLOSED) {
- /* sibling ports are forced to be closed */
- ports[sibling].port_status = RTE_PORT_CLOSED;
- printf("Port %u is closed\n", sibling);
+ if (ports[sibling].port_status != RTE_PORT_STOPPED) {
+ fprintf(stderr, "Port %u not stopped\n",
+ sibling);
+ return;
+ }
+ port_flow_flush(sibling);
}
}
+ if (rte_dev_remove(dev) < 0) {
+ TESTPMD_LOG(ERR, "Failed to detach device %s\n", dev->name);
+ return;
+ }
remove_invalid_ports();
printf("Device is detached\n");
void
detach_port_device(portid_t port_id)
{
+ int ret;
+ struct rte_eth_dev_info dev_info;
+
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (ports[port_id].port_status != RTE_PORT_CLOSED) {
if (ports[port_id].port_status != RTE_PORT_STOPPED) {
- printf("Port not stopped\n");
+ fprintf(stderr, "Port not stopped\n");
return;
}
- printf("Port was not closed\n");
- if (ports[port_id].flow_list)
- port_flow_flush(port_id);
+ fprintf(stderr, "Port was not closed\n");
}
- detach_device(rte_eth_devices[port_id].device);
+ ret = eth_dev_info_get_print_err(port_id, &dev_info);
+ if (ret != 0) {
+ TESTPMD_LOG(ERR,
+ "Failed to get device info for port %d, not detaching\n",
+ port_id);
+ return;
+ }
+ detach_device(dev_info.device);
}
void
memset(&da, 0, sizeof(da));
if (rte_devargs_parsef(&da, "%s", identifier)) {
- printf("cannot parse identifier\n");
- if (da.args)
- free(da.args);
+ fprintf(stderr, "cannot parse identifier\n");
return;
}
RTE_ETH_FOREACH_MATCHING_DEV(port_id, identifier, &iterator) {
if (ports[port_id].port_status != RTE_PORT_CLOSED) {
if (ports[port_id].port_status != RTE_PORT_STOPPED) {
- printf("Port %u not stopped\n", port_id);
+ fprintf(stderr, "Port %u not stopped\n",
+ port_id);
rte_eth_iterator_cleanup(&iterator);
+ rte_devargs_reset(&da);
return;
}
-
- /* sibling ports are forced to be closed */
- if (ports[port_id].flow_list)
- port_flow_flush(port_id);
- ports[port_id].port_status = RTE_PORT_CLOSED;
- printf("Port %u is now closed\n", port_id);
+ port_flow_flush(port_id);
}
}
if (rte_eal_hotplug_remove(da.bus->name, da.name) != 0) {
TESTPMD_LOG(ERR, "Failed to detach device %s(%s)\n",
da.name, da.bus->name);
+ rte_devargs_reset(&da);
return;
}
printf("Device %s is detached\n", identifier);
printf("Now total ports is %d\n", nb_ports);
printf("Done\n");
+ rte_devargs_reset(&da);
}
void
pmd_test_exit(void)
{
portid_t pt_id;
+ unsigned int i;
int ret;
- int i;
if (test_done == 0)
stop_packet_forwarding();
- for (i = 0 ; i < RTE_MAX_NUMA_NODES ; i++) {
+#ifndef RTE_EXEC_ENV_WINDOWS
+ for (i = 0 ; i < RTE_DIM(mempools) ; i++) {
if (mempools[i]) {
if (mp_alloc_type == MP_ALLOC_ANON)
rte_mempool_mem_iter(mempools[i], dma_unmap_cb,
NULL);
}
}
+#endif
if (ports != NULL) {
no_link_check = 1;
RTE_ETH_FOREACH_DEV(pt_id) {
return;
}
}
- for (i = 0 ; i < RTE_MAX_NUMA_NODES ; i++) {
+ for (i = 0 ; i < RTE_DIM(mempools) ; i++) {
if (mempools[i])
- rte_mempool_free(mempools[i]);
+ mempool_free_mp(mempools[i]);
}
+ free(xstats_display);
printf("\nBye...\n");
}
uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
int ret;
+ char link_status[RTE_ETH_LINK_MAX_STR_LEN];
printf("Checking link statuses...\n");
fflush(stdout);
if (ret < 0) {
all_ports_up = 0;
if (print_flag == 1)
- printf("Port %u link get failed: %s\n",
+ fprintf(stderr,
+ "Port %u link get failed: %s\n",
portid, rte_strerror(-ret));
continue;
}
/* print link status if flag set */
if (print_flag == 1) {
- if (link.link_status)
- printf(
- "Port%d Link Up. speed %u Mbps- %s\n",
- portid, link.link_speed,
- (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
- else
- printf("Port %d Link Down\n", portid);
+ rte_eth_link_to_str(link_status,
+ sizeof(link_status), &link);
+ printf("Port %d %s\n", portid, link_status);
continue;
}
/* clear all_ports_up flag if any link down */
}
}
-/*
- * This callback is for remove a port for a device. It has limitation because
- * it is not for multiple port removal for a device.
- * TODO: the device detach invoke will plan to be removed from user side to
- * eal. And convert all PMDs to free port resources on ether device closing.
- */
static void
rmv_port_callback(void *arg)
{
int need_to_start = 0;
int org_no_link_check = no_link_check;
portid_t port_id = (intptr_t)arg;
- struct rte_device *dev;
+ struct rte_eth_dev_info dev_info;
+ int ret;
RTE_ETH_VALID_PORTID_OR_RET(port_id);
stop_port(port_id);
no_link_check = org_no_link_check;
- /* Save rte_device pointer before closing ethdev port */
- dev = rte_eth_devices[port_id].device;
- close_port(port_id);
- detach_device(dev); /* might be already removed or have more ports */
-
+ ret = eth_dev_info_get_print_err(port_id, &dev_info);
+ if (ret != 0)
+ TESTPMD_LOG(ERR,
+ "Failed to get device info for port %d, not detaching\n",
+ port_id);
+ else {
+ struct rte_device *device = dev_info.device;
+ close_port(port_id);
+ detach_device(device); /* might be already removed or have more ports */
+ }
if (need_to_start)
start_packet_forwarding(0);
}
RTE_SET_USED(ret_param);
if (type >= RTE_ETH_EVENT_MAX) {
- fprintf(stderr, "\nPort %" PRIu16 ": %s called upon invalid event %d\n",
+ fprintf(stderr,
+ "\nPort %" PRIu16 ": %s called upon invalid event %d\n",
port_id, __func__, type);
fflush(stderr);
} else if (event_print_mask & (UINT32_C(1) << type)) {
break;
if (rte_eal_alarm_set(100000,
rmv_port_callback, (void *)(intptr_t)port_id))
- fprintf(stderr, "Could not set up deferred device removal\n");
+ fprintf(stderr,
+ "Could not set up deferred device removal\n");
+ break;
+ case RTE_ETH_EVENT_DESTROY:
+ ports[port_id].port_status = RTE_PORT_CLOSED;
+ printf("Port %u is closed\n", port_id);
break;
default:
break;
}
}
-static int
-set_tx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
-{
- uint16_t i;
- int diag;
- uint8_t mapping_found = 0;
-
- for (i = 0; i < nb_tx_queue_stats_mappings; i++) {
- if ((tx_queue_stats_mappings[i].port_id == port_id) &&
- (tx_queue_stats_mappings[i].queue_id < nb_txq )) {
- diag = rte_eth_dev_set_tx_queue_stats_mapping(port_id,
- tx_queue_stats_mappings[i].queue_id,
- tx_queue_stats_mappings[i].stats_counter_id);
- if (diag != 0)
- return diag;
- mapping_found = 1;
- }
- }
- if (mapping_found)
- port->tx_queue_stats_mapping_enabled = 1;
- return 0;
-}
-
-static int
-set_rx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
-{
- uint16_t i;
- int diag;
- uint8_t mapping_found = 0;
-
- for (i = 0; i < nb_rx_queue_stats_mappings; i++) {
- if ((rx_queue_stats_mappings[i].port_id == port_id) &&
- (rx_queue_stats_mappings[i].queue_id < nb_rxq )) {
- diag = rte_eth_dev_set_rx_queue_stats_mapping(port_id,
- rx_queue_stats_mappings[i].queue_id,
- rx_queue_stats_mappings[i].stats_counter_id);
- if (diag != 0)
- return diag;
- mapping_found = 1;
- }
- }
- if (mapping_found)
- port->rx_queue_stats_mapping_enabled = 1;
- return 0;
-}
-
-static void
-map_port_queue_stats_mapping_registers(portid_t pi, struct rte_port *port)
-{
- int diag = 0;
-
- diag = set_tx_queue_stats_mapping_registers(pi, port);
- if (diag != 0) {
- if (diag == -ENOTSUP) {
- port->tx_queue_stats_mapping_enabled = 0;
- printf("TX queue stats mapping not supported port id=%d\n", pi);
- }
- else
- rte_exit(EXIT_FAILURE,
- "set_tx_queue_stats_mapping_registers "
- "failed for port id=%d diag=%d\n",
- pi, diag);
- }
-
- diag = set_rx_queue_stats_mapping_registers(pi, port);
- if (diag != 0) {
- if (diag == -ENOTSUP) {
- port->rx_queue_stats_mapping_enabled = 0;
- printf("RX queue stats mapping not supported port id=%d\n", pi);
- }
- else
- rte_exit(EXIT_FAILURE,
- "set_rx_queue_stats_mapping_registers "
- "failed for port id=%d diag=%d\n",
- pi, diag);
- }
-}
-
static void
-rxtx_port_config(struct rte_port *port)
+rxtx_port_config(portid_t pid)
{
uint16_t qid;
uint64_t offloads;
+ struct rte_port *port = &ports[pid];
for (qid = 0; qid < nb_rxq; qid++) {
offloads = port->rx_conf[qid].offloads;
port->rx_conf[qid] = port->dev_info.default_rxconf;
+
+ if (rxq_share > 0 &&
+ (port->dev_info.dev_capa & RTE_ETH_DEV_CAPA_RXQ_SHARE)) {
+ /* Non-zero share group to enable RxQ share. */
+ port->rx_conf[qid].share_group = pid / rxq_share + 1;
+ port->rx_conf[qid].share_qid = qid; /* Equal mapping. */
+ }
+
if (offloads != 0)
port->rx_conf[qid].offloads = offloads;
}
}
+/*
+ * Helper function to set MTU from frame size
+ *
+ * port->dev_info should be set before calling this function.
+ *
+ * return 0 on success, negative on error
+ */
+int
+update_mtu_from_frame_size(portid_t portid, uint32_t max_rx_pktlen)
+{
+ struct rte_port *port = &ports[portid];
+ uint32_t eth_overhead;
+ uint16_t mtu, new_mtu;
+
+ eth_overhead = get_eth_overhead(&port->dev_info);
+
+ if (rte_eth_dev_get_mtu(portid, &mtu) != 0) {
+ printf("Failed to get MTU for port %u\n", portid);
+ return -1;
+ }
+
+ new_mtu = max_rx_pktlen - eth_overhead;
+
+ if (mtu == new_mtu)
+ return 0;
+
+ if (eth_dev_set_mtu_mp(portid, new_mtu) != 0) {
+ fprintf(stderr,
+ "Failed to set MTU to %u for port %u\n",
+ new_mtu, portid);
+ return -1;
+ }
+
+ port->dev_conf.rxmode.mtu = new_mtu;
+
+ return 0;
+}
+
void
init_port_config(void)
{
portid_t pid;
struct rte_port *port;
- int ret;
+ int ret, i;
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
}
if (port->dcb_flag == 0) {
- if( port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0)
- port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_RSS;
- else
+ if (port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0) {
+ port->dev_conf.rxmode.mq_mode =
+ (enum rte_eth_rx_mq_mode)
+ (rx_mq_mode & ETH_MQ_RX_RSS);
+ } else {
port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE;
+ port->dev_conf.rxmode.offloads &=
+ ~DEV_RX_OFFLOAD_RSS_HASH;
+
+ for (i = 0;
+ i < port->dev_info.nb_rx_queues;
+ i++)
+ port->rx_conf[i].offloads &=
+ ~DEV_RX_OFFLOAD_RSS_HASH;
+ }
}
- rxtx_port_config(port);
+ rxtx_port_config(pid);
ret = eth_macaddr_get_print_err(pid, &port->eth_addr);
if (ret != 0)
return;
- map_port_queue_stats_mapping_registers(pid, port);
-#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
+#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS
rte_pmd_ixgbe_bypass_init(pid);
#endif
- if (lsc_interrupt &&
- (rte_eth_devices[pid].data->dev_flags &
- RTE_ETH_DEV_INTR_LSC))
+ if (lsc_interrupt && (*port->dev_info.dev_flags & RTE_ETH_DEV_INTR_LSC))
port->dev_conf.intr_conf.lsc = 1;
- if (rmv_interrupt &&
- (rte_eth_devices[pid].data->dev_flags &
- RTE_ETH_DEV_INTR_RMV))
+ if (rmv_interrupt && (*port->dev_info.dev_flags & RTE_ETH_DEV_INTR_RMV))
port->dev_conf.intr_conf.rmv = 1;
}
}
uint8_t port_is_bonding_slave(portid_t slave_pid)
{
struct rte_port *port;
+ struct rte_eth_dev_info dev_info;
+ int ret;
port = &ports[slave_pid];
- if ((rte_eth_devices[slave_pid].data->dev_flags &
- RTE_ETH_DEV_BONDED_SLAVE) || (port->slave_flag == 1))
+ ret = eth_dev_info_get_print_err(slave_pid, &dev_info);
+ if (ret != 0) {
+ TESTPMD_LOG(ERR,
+ "Failed to get device info for port id %d,"
+ "cannot determine if the port is a bonded slave",
+ slave_pid);
+ return 0;
+ }
+ if ((*dev_info.dev_flags & RTE_ETH_DEV_BONDED_SLAVE) || (port->slave_flag == 1))
return 1;
return 0;
}
}
/* set DCB mode of RX and TX of multiple queues */
- eth_conf->rxmode.mq_mode = ETH_MQ_RX_VMDQ_DCB;
+ eth_conf->rxmode.mq_mode =
+ (enum rte_eth_rx_mq_mode)
+ (rx_mq_mode & ETH_MQ_RX_VMDQ_DCB);
eth_conf->txmode.mq_mode = ETH_MQ_TX_VMDQ_DCB;
} else {
struct rte_eth_dcb_rx_conf *rx_conf =
struct rte_eth_dcb_tx_conf *tx_conf =
ð_conf->tx_adv_conf.dcb_tx_conf;
+ memset(&rss_conf, 0, sizeof(struct rte_eth_rss_conf));
+
rc = rte_eth_dev_rss_hash_conf_get(pid, &rss_conf);
if (rc != 0)
return rc;
tx_conf->dcb_tc[i] = i % num_tcs;
}
- eth_conf->rxmode.mq_mode = ETH_MQ_RX_DCB_RSS;
+ eth_conf->rxmode.mq_mode =
+ (enum rte_eth_rx_mq_mode)
+ (rx_mq_mode & ETH_MQ_RX_DCB_RSS);
eth_conf->rx_adv_conf.rss_conf = rss_conf;
eth_conf->txmode.mq_mode = ETH_MQ_TX_DCB;
}
int retval;
uint16_t i;
+ if (num_procs > 1) {
+ printf("The multi-process feature doesn't support dcb.\n");
+ return -ENOTSUP;
+ }
rte_port = &ports[pid];
- memset(&port_conf, 0, sizeof(struct rte_eth_conf));
- /* Enter DCB configuration status */
- dcb_config = 1;
-
- port_conf.rxmode = rte_port->dev_conf.rxmode;
- port_conf.txmode = rte_port->dev_conf.txmode;
+ /* retain the original device configuration. */
+ memcpy(&port_conf, &rte_port->dev_conf, sizeof(struct rte_eth_conf));
/*set configuration of DCB in vt mode and DCB in non-vt mode*/
retval = get_eth_dcb_conf(pid, &port_conf, dcb_mode, num_tcs, pfc_en);
*/
if (dcb_mode == DCB_VT_ENABLED &&
rte_port->dev_info.vmdq_pool_base > 0) {
- printf("VMDQ_DCB multi-queue mode is nonsensical"
- " for port %d.", pid);
+ fprintf(stderr,
+ "VMDQ_DCB multi-queue mode is nonsensical for port %d.\n",
+ pid);
return -1;
}
memcpy(&rte_port->dev_conf, &port_conf, sizeof(struct rte_eth_conf));
- rxtx_port_config(rte_port);
+ rxtx_port_config(pid);
/* VLAN filter */
rte_port->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
for (i = 0; i < RTE_DIM(vlan_tags); i++)
if (retval != 0)
return retval;
- map_port_queue_stats_mapping_registers(pid, rte_port);
-
rte_port->dcb_flag = 1;
+ /* Enter DCB configuration status */
+ dcb_config = 1;
+
return 0;
}
static void
init_port(void)
{
+ int i;
+
/* Configuration of Ethernet ports. */
ports = rte_zmalloc("testpmd: ports",
sizeof(struct rte_port) * RTE_MAX_ETHPORTS,
"rte_zmalloc(%d struct rte_port) failed\n",
RTE_MAX_ETHPORTS);
}
-
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++)
+ ports[i].xstats_info.allocated = false;
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++)
+ LIST_INIT(&ports[i].flow_tunnel_list);
/* Initialize ports NUMA structures */
memset(port_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
memset(rxring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
signal_handler(int signum)
{
if (signum == SIGINT || signum == SIGTERM) {
- printf("\nSignal %d received, preparing to exit...\n",
- signum);
-#ifdef RTE_LIBRTE_PDUMP
+ fprintf(stderr, "\nSignal %d received, preparing to exit...\n",
+ signum);
+#ifdef RTE_LIB_PDUMP
/* uninitialize packet capture framework */
rte_pdump_uninit();
#endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
if (latencystats_enabled != 0)
rte_latencystats_uninit();
#endif
/* Set flag to indicate the force termination. */
f_quit = 1;
/* exit with the expected status */
+#ifndef RTE_EXEC_ENV_WINDOWS
signal(signum, SIG_DFL);
kill(getpid(), signum);
+#endif
}
}
rte_exit(EXIT_FAILURE, "Cannot init EAL: %s\n",
rte_strerror(rte_errno));
- if (rte_eal_process_type() == RTE_PROC_SECONDARY)
- rte_exit(EXIT_FAILURE,
- "Secondary process type not supported.\n");
-
ret = register_eth_event_callback();
if (ret != 0)
rte_exit(EXIT_FAILURE, "Cannot register for ethdev events");
-#ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIB_PDUMP
/* initialize packet capture framework */
rte_pdump_init();
#endif
"Check the core mask argument\n");
/* Bitrate/latency stats disabled by default */
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIB_BITRATESTATS
bitrate_enabled = 0;
#endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
latencystats_enabled = 0;
#endif
if (argc > 1)
launch_args_parse(argc, argv);
+#ifndef RTE_EXEC_ENV_WINDOWS
if (do_mlockall && mlockall(MCL_CURRENT | MCL_FUTURE)) {
TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n",
strerror(errno));
}
+#endif
if (tx_first && interactive)
rte_exit(EXIT_FAILURE, "--tx-first cannot be used on "
"interactive mode.\n");
if (tx_first && lsc_interrupt) {
- printf("Warning: lsc_interrupt needs to be off when "
- " using tx_first. Disabling.\n");
+ fprintf(stderr,
+ "Warning: lsc_interrupt needs to be off when using tx_first. Disabling.\n");
lsc_interrupt = 0;
}
if (!nb_rxq && !nb_txq)
- printf("Warning: Either rx or tx queues should be non-zero\n");
+ fprintf(stderr,
+ "Warning: Either rx or tx queues should be non-zero\n");
if (nb_rxq > 1 && nb_rxq > nb_txq)
- printf("Warning: nb_rxq=%d enables RSS configuration, "
- "but nb_txq=%d will prevent to fully test it.\n",
- nb_rxq, nb_txq);
+ fprintf(stderr,
+ "Warning: nb_rxq=%d enables RSS configuration, but nb_txq=%d will prevent to fully test it.\n",
+ nb_rxq, nb_txq);
init_config();
RTE_ETH_FOREACH_DEV(port_id) {
ret = rte_eth_promiscuous_enable(port_id);
if (ret != 0)
- printf("Error during enabling promiscuous mode for port %u: %s - ignore\n",
+ fprintf(stderr,
+ "Error during enabling promiscuous mode for port %u: %s - ignore\n",
port_id, rte_strerror(-ret));
}
/* Init metrics library */
rte_metrics_init(rte_socket_id());
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
if (latencystats_enabled != 0) {
int ret = rte_latencystats_init(1, NULL);
if (ret)
- printf("Warning: latencystats init()"
- " returned error %d\n", ret);
- printf("Latencystats running on lcore %d\n",
+ fprintf(stderr,
+ "Warning: latencystats init() returned error %d\n",
+ ret);
+ fprintf(stderr, "Latencystats running on lcore %d\n",
latencystats_lcore_id);
}
#endif
/* Setup bitrate stats */
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIB_BITRATESTATS
if (bitrate_enabled != 0) {
bitrate_data = rte_stats_bitrate_create();
if (bitrate_data == NULL)
rte_stats_bitrate_reg(bitrate_data);
}
#endif
-
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
if (strlen(cmdline_filename) != 0)
cmdline_read_from_file(cmdline_filename);
}
/* Sleep to avoid unnecessary checks */
prev_time = cur_time;
- sleep(1);
+ rte_delay_us_sleep(US_PER_S);
}
}
git.droids-corp.org / dpdk.git / blobdiff