app/testpmd: add log for preferred mempool ops
[dpdk.git] / app / test-pmd / testpmd.c
index 57a6f89..d8ac432 100644 (file)
@@ -1,34 +1,5 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2017 Intel Corporation
  */
 
 #include <stdarg.h>
@@ -57,7 +28,6 @@
 #include <rte_cycles.h>
 #include <rte_memory.h>
 #include <rte_memcpy.h>
-#include <rte_memzone.h>
 #include <rte_launch.h>
 #include <rte_eal.h>
 #include <rte_alarm.h>
@@ -68,6 +38,7 @@
 #include <rte_mempool.h>
 #include <rte_malloc.h>
 #include <rte_mbuf.h>
+#include <rte_mbuf_pool_ops.h>
 #include <rte_interrupts.h>
 #include <rte_pci.h>
 #include <rte_ether.h>
@@ -92,6 +63,7 @@
 #include "testpmd.h"
 
 uint16_t verbose_level = 0; /**< Silent by default. */
+int testpmd_logtype; /**< Log type for testpmd logs */
 
 /* use master core for command line ? */
 uint8_t interactive = 0;
@@ -164,6 +136,10 @@ struct fwd_engine * fwd_engines[] = {
        &tx_only_engine,
        &csum_fwd_engine,
        &icmp_echo_engine,
+#if defined RTE_LIBRTE_PMD_SOFTNIC && defined RTE_LIBRTE_SCHED
+       &softnic_tm_engine,
+       &softnic_tm_bypass_engine,
+#endif
 #ifdef RTE_LIBRTE_IEEE1588
        &ieee1588_fwd_engine,
 #endif
@@ -180,6 +156,13 @@ uint16_t mbuf_data_size = DEFAULT_MBUF_DATA_SIZE; /**< Mbuf data space size. */
 uint32_t param_total_num_mbufs = 0;  /**< number of mbufs in all pools - if
                                       * specified on command-line. */
 uint16_t stats_period; /**< Period to show statistics (disabled by default) */
+
+/*
+ * In container, it cannot terminate the process which running with 'stats-period'
+ * option. Set flag to exit stats period loop after received SIGINT/SIGTERM.
+ */
+uint8_t f_quit;
+
 /*
  * Configuration of packet segments used by the "txonly" processing engine.
  */
@@ -248,11 +231,6 @@ int16_t tx_free_thresh = RTE_PMD_PARAM_UNSET;
  */
 int16_t tx_rs_thresh = RTE_PMD_PARAM_UNSET;
 
-/*
- * Configurable value of TX queue flags.
- */
-int32_t txq_flags = RTE_PMD_PARAM_UNSET;
-
 /*
  * Receive Side Scaling (RSS) configuration.
  */
@@ -328,14 +306,14 @@ lcoreid_t latencystats_lcore_id = -1;
  */
 struct rte_eth_rxmode rx_mode = {
        .max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */
-       .split_hdr_size = 0,
-       .header_split   = 0, /**< Header Split disabled. */
-       .hw_ip_checksum = 0, /**< IP checksum offload disabled. */
-       .hw_vlan_filter = 1, /**< VLAN filtering enabled. */
-       .hw_vlan_strip  = 1, /**< VLAN strip enabled. */
-       .hw_vlan_extend = 0, /**< Extended VLAN disabled. */
-       .jumbo_frame    = 0, /**< Jumbo Frame Support disabled. */
-       .hw_strip_crc   = 1, /**< CRC stripping by hardware enabled. */
+       .offloads = (DEV_RX_OFFLOAD_VLAN_FILTER |
+                    DEV_RX_OFFLOAD_VLAN_STRIP |
+                    DEV_RX_OFFLOAD_CRC_STRIP),
+       .ignore_offload_bitfield = 1,
+};
+
+struct rte_eth_txmode tx_mode = {
+       .offloads = DEV_TX_OFFLOAD_MBUF_FAST_FREE,
 };
 
 struct rte_fdir_conf fdir_conf = {
@@ -372,6 +350,11 @@ struct queue_stats_mappings *rx_queue_stats_mappings = rx_queue_stats_mappings_a
 uint16_t nb_tx_queue_stats_mappings = 0;
 uint16_t nb_rx_queue_stats_mappings = 0;
 
+/*
+ * Display zero values by default for xstats
+ */
+uint8_t xstats_hide_zero;
+
 unsigned int num_sockets = 0;
 unsigned int socket_ids[RTE_MAX_NUMA_NODES];
 
@@ -386,7 +369,8 @@ struct gro_status gro_ports[RTE_MAX_ETHPORTS];
 uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES;
 
 /* Forward function declarations */
-static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
+static void map_port_queue_stats_mapping_registers(portid_t pi,
+                                                  struct rte_port *port);
 static void check_all_ports_link_status(uint32_t port_mask);
 static int eth_event_callback(portid_t port_id,
                              enum rte_eth_event_type type,
@@ -464,9 +448,10 @@ static void
 set_default_fwd_ports_config(void)
 {
        portid_t pt_id;
+       int i = 0;
 
-       for (pt_id = 0; pt_id < nb_ports; pt_id++)
-               fwd_ports_ids[pt_id] = pt_id;
+       RTE_ETH_FOREACH_DEV(pt_id)
+               fwd_ports_ids[i++] = pt_id;
 
        nb_cfg_ports = nb_ports;
        nb_fwd_ports = nb_ports;
@@ -494,7 +479,7 @@ mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf,
        mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size;
        mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name));
 
-       RTE_LOG(INFO, USER1,
+       TESTPMD_LOG(INFO,
                "create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n",
                pool_name, nb_mbuf, mbuf_seg_size, socket_id);
 
@@ -515,6 +500,8 @@ mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf,
                rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL);
        } else {
                /* wrapper to rte_mempool_create() */
+               TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
+                               rte_mbuf_best_mempool_ops());
                rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
                        mb_mempool_cache, 0, mbuf_seg_size, socket_id);
        }
@@ -550,6 +537,98 @@ check_socket_id(const unsigned int socket_id)
        return 0;
 }
 
+/*
+ * Get the allowed maximum number of RX queues.
+ * *pid return the port id which has minimal value of
+ * max_rx_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_rxq(portid_t *pid)
+{
+       queueid_t allowed_max_rxq = MAX_QUEUE_ID;
+       portid_t pi;
+       struct rte_eth_dev_info dev_info;
+
+       RTE_ETH_FOREACH_DEV(pi) {
+               rte_eth_dev_info_get(pi, &dev_info);
+               if (dev_info.max_rx_queues < allowed_max_rxq) {
+                       allowed_max_rxq = dev_info.max_rx_queues;
+                       *pid = pi;
+               }
+       }
+       return allowed_max_rxq;
+}
+
+/*
+ * Check input rxq is valid or not.
+ * If input rxq is not greater than any of maximum number
+ * of RX queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_rxq(queueid_t rxq)
+{
+       queueid_t allowed_max_rxq;
+       portid_t pid = 0;
+
+       allowed_max_rxq = get_allowed_max_nb_rxq(&pid);
+       if (rxq > allowed_max_rxq) {
+               printf("Fail: input rxq (%u) can't be greater "
+                      "than max_rx_queues (%u) of port %u\n",
+                      rxq,
+                      allowed_max_rxq,
+                      pid);
+               return -1;
+       }
+       return 0;
+}
+
+/*
+ * Get the allowed maximum number of TX queues.
+ * *pid return the port id which has minimal value of
+ * max_tx_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_txq(portid_t *pid)
+{
+       queueid_t allowed_max_txq = MAX_QUEUE_ID;
+       portid_t pi;
+       struct rte_eth_dev_info dev_info;
+
+       RTE_ETH_FOREACH_DEV(pi) {
+               rte_eth_dev_info_get(pi, &dev_info);
+               if (dev_info.max_tx_queues < allowed_max_txq) {
+                       allowed_max_txq = dev_info.max_tx_queues;
+                       *pid = pi;
+               }
+       }
+       return allowed_max_txq;
+}
+
+/*
+ * Check input txq is valid or not.
+ * If input txq is not greater than any of maximum number
+ * of TX queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_txq(queueid_t txq)
+{
+       queueid_t allowed_max_txq;
+       portid_t pid = 0;
+
+       allowed_max_txq = get_allowed_max_nb_txq(&pid);
+       if (txq > allowed_max_txq) {
+               printf("Fail: input txq (%u) can't be greater "
+                      "than max_tx_queues (%u) of port %u\n",
+                      txq,
+                      allowed_max_txq,
+                      pid);
+               return -1;
+       }
+       return 0;
+}
+
 static void
 init_config(void)
 {
@@ -591,7 +670,14 @@ init_config(void)
 
        RTE_ETH_FOREACH_DEV(pid) {
                port = &ports[pid];
+               /* Apply default Tx configuration for all ports */
+               port->dev_conf.txmode = tx_mode;
+               port->dev_conf.rxmode = rx_mode;
                rte_eth_dev_info_get(pid, &port->dev_info);
+               if (!(port->dev_info.tx_offload_capa &
+                     DEV_TX_OFFLOAD_MBUF_FAST_FREE))
+                       port->dev_conf.txmode.offloads &=
+                               ~DEV_TX_OFFLOAD_MBUF_FAST_FREE;
 
                if (numa_support) {
                        if (port_numa[pid] != NUMA_NO_CONFIG)
@@ -1351,14 +1437,14 @@ stop_packet_forwarding(void)
 void
 dev_set_link_up(portid_t pid)
 {
-       if (rte_eth_dev_set_link_up((uint8_t)pid) < 0)
+       if (rte_eth_dev_set_link_up(pid) < 0)
                printf("\nSet link up fail.\n");
 }
 
 void
 dev_set_link_down(portid_t pid)
 {
-       if (rte_eth_dev_set_link_down((uint8_t)pid) < 0)
+       if (rte_eth_dev_set_link_down(pid) < 0)
                printf("\nSet link down fail.\n");
 }
 
@@ -1380,16 +1466,24 @@ all_ports_started(void)
        return 1;
 }
 
+int
+port_is_stopped(portid_t port_id)
+{
+       struct rte_port *port = &ports[port_id];
+
+       if ((port->port_status != RTE_PORT_STOPPED) &&
+           (port->slave_flag == 0))
+               return 0;
+       return 1;
+}
+
 int
 all_ports_stopped(void)
 {
        portid_t pi;
-       struct rte_port *port;
 
        RTE_ETH_FOREACH_DEV(pi) {
-               port = &ports[pi];
-               if ((port->port_status != RTE_PORT_STOPPED) &&
-                       (port->slave_flag == 0))
+               if (!port_is_stopped(pi))
                        return 0;
        }
 
@@ -1477,6 +1571,9 @@ start_port(portid_t pid)
                }
                if (port->need_reconfig_queues > 0) {
                        port->need_reconfig_queues = 0;
+                       port->tx_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
+                       /* Apply Tx offloads configuration */
+                       port->tx_conf.offloads = port->dev_conf.txmode.offloads;
                        /* setup tx queues */
                        for (qi = 0; qi < nb_txq; qi++) {
                                if ((numa_support) &&
@@ -1503,6 +1600,8 @@ start_port(portid_t pid)
                                port->need_reconfig_queues = 1;
                                return -1;
                        }
+                       /* Apply Rx offloads configuration */
+                       port->rx_conf.offloads = port->dev_conf.rxmode.offloads;
                        /* setup rx queues */
                        for (qi = 0; qi < nb_rxq; qi++) {
                                if ((numa_support) &&
@@ -1550,20 +1649,6 @@ start_port(portid_t pid)
                        }
                }
 
-               for (event_type = RTE_ETH_EVENT_UNKNOWN;
-                    event_type < RTE_ETH_EVENT_MAX;
-                    event_type++) {
-                       diag = rte_eth_dev_callback_register(pi,
-                                                       event_type,
-                                                       eth_event_callback,
-                                                       NULL);
-                       if (diag) {
-                               printf("Failed to setup even callback for event %d\n",
-                                       event_type);
-                               return -1;
-                       }
-               }
-
                /* start port */
                if (rte_eth_dev_start(pi) < 0) {
                        printf("Fail to start port %d\n", pi);
@@ -1590,6 +1675,20 @@ start_port(portid_t pid)
                need_check_link_status = 1;
        }
 
+       for (event_type = RTE_ETH_EVENT_UNKNOWN;
+            event_type < RTE_ETH_EVENT_MAX;
+            event_type++) {
+               diag = rte_eth_dev_callback_register(RTE_ETH_ALL,
+                                               event_type,
+                                               eth_event_callback,
+                                               NULL);
+               if (diag) {
+                       printf("Failed to setup even callback for event %d\n",
+                               event_type);
+                       return -1;
+               }
+       }
+
        if (need_check_link_status == 1 && !no_link_check)
                check_all_ports_link_status(RTE_PORT_ALL);
        else if (need_check_link_status == 0)
@@ -1771,7 +1870,7 @@ attach_port(char *identifier)
 }
 
 void
-detach_port(uint8_t port_id)
+detach_port(portid_t port_id)
 {
        char name[RTE_ETH_NAME_MAX_LEN];
 
@@ -1786,7 +1885,7 @@ detach_port(uint8_t port_id)
                port_flow_flush(port_id);
 
        if (rte_eth_dev_detach(port_id, name)) {
-               RTE_LOG(ERR, USER1, "Failed to detach port '%s'\n", name);
+               TESTPMD_LOG(ERR, "Failed to detach port '%s'\n", name);
                return;
        }
 
@@ -1886,7 +1985,7 @@ static void
 rmv_event_callback(void *arg)
 {
        struct rte_eth_dev *dev;
-       uint8_t port_id = (intptr_t)arg;
+       portid_t port_id = (intptr_t)arg;
 
        RTE_ETH_VALID_PORTID_OR_RET(port_id);
        dev = &rte_eth_devices[port_id];
@@ -1895,7 +1994,7 @@ rmv_event_callback(void *arg)
        close_port(port_id);
        printf("removing device %s\n", dev->device->name);
        if (rte_eal_dev_detach(dev->device))
-               RTE_LOG(ERR, USER1, "Failed to detach device %s\n",
+               TESTPMD_LOG(ERR, "Failed to detach device %s\n",
                        dev->device->name);
 }
 
@@ -1912,6 +2011,8 @@ eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
                [RTE_ETH_EVENT_VF_MBOX] = "VF Mbox",
                [RTE_ETH_EVENT_MACSEC] = "MACsec",
                [RTE_ETH_EVENT_INTR_RMV] = "device removal",
+               [RTE_ETH_EVENT_NEW] = "device probed",
+               [RTE_ETH_EVENT_DESTROY] = "device released",
                [RTE_ETH_EVENT_MAX] = NULL,
        };
 
@@ -1941,7 +2042,7 @@ eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
 }
 
 static int
-set_tx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
+set_tx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
 {
        uint16_t i;
        int diag;
@@ -1964,7 +2065,7 @@ set_tx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
 }
 
 static int
-set_rx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
+set_rx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
 {
        uint16_t i;
        int diag;
@@ -1987,7 +2088,7 @@ set_rx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
 }
 
 static void
-map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port)
+map_port_queue_stats_mapping_registers(portid_t pi, struct rte_port *port)
 {
        int diag = 0;
 
@@ -2054,9 +2155,6 @@ rxtx_port_config(struct rte_port *port)
 
        if (tx_free_thresh != RTE_PMD_PARAM_UNSET)
                port->tx_conf.tx_free_thresh = tx_free_thresh;
-
-       if (txq_flags != RTE_PMD_PARAM_UNSET)
-               port->tx_conf.txq_flags = txq_flags;
 }
 
 void
@@ -2067,7 +2165,6 @@ init_port_config(void)
 
        RTE_ETH_FOREACH_DEV(pid) {
                port = &ports[pid];
-               port->dev_conf.rxmode = rx_mode;
                port->dev_conf.fdir_conf = fdir_conf;
                if (nb_rxq > 1) {
                        port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
@@ -2101,6 +2198,17 @@ init_port_config(void)
                    (rte_eth_devices[pid].data->dev_flags &
                     RTE_ETH_DEV_INTR_RMV))
                        port->dev_conf.intr_conf.rmv = 1;
+
+#if defined RTE_LIBRTE_PMD_SOFTNIC && defined RTE_LIBRTE_SCHED
+               /* Detect softnic port */
+               if (!strcmp(port->dev_info.driver_name, "net_softnic")) {
+                       port->softnic_enable = 1;
+                       memset(&port->softport, 0, sizeof(struct softnic_port));
+
+                       if (!strcmp(cur_fwd_eng->fwd_mode_name, "tm"))
+                               port->softport.tm_flag = 1;
+               }
+#endif
        }
 }
 
@@ -2168,8 +2276,8 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf,
                                1 << (i % vmdq_rx_conf->nb_queue_pools);
                }
                for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
-                       vmdq_rx_conf->dcb_tc[i] = i;
-                       vmdq_tx_conf->dcb_tc[i] = i;
+                       vmdq_rx_conf->dcb_tc[i] = i % num_tcs;
+                       vmdq_tx_conf->dcb_tc[i] = i % num_tcs;
                }
 
                /* set DCB mode of RX and TX of multiple queues */
@@ -2223,7 +2331,7 @@ init_port_dcb_config(portid_t pid,
        retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
        if (retval < 0)
                return retval;
-       port_conf.rxmode.hw_vlan_filter = 1;
+       port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
 
        /**
         * Write the configuration into the device.
@@ -2272,7 +2380,7 @@ init_port_dcb_config(portid_t pid,
 
        rxtx_port_config(rte_port);
        /* VLAN filter */
-       rte_port->dev_conf.rxmode.hw_vlan_filter = 1;
+       rte_port->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
        for (i = 0; i < RTE_DIM(vlan_tags); i++)
                rx_vft_set(pid, vlan_tags[i], 1);
 
@@ -2334,6 +2442,8 @@ signal_handler(int signum)
                rte_latencystats_uninit();
 #endif
                force_quit();
+               /* Set flag to indicate the force termination. */
+               f_quit = 1;
                /* exit with the expected status */
                signal(signum, SIG_DFL);
                kill(getpid(), signum);
@@ -2353,8 +2463,13 @@ main(int argc, char** argv)
        if (diag < 0)
                rte_panic("Cannot init EAL\n");
 
+       testpmd_logtype = rte_log_register("testpmd");
+       if (testpmd_logtype < 0)
+               rte_panic("Cannot register log type");
+       rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
+
        if (mlockall(MCL_CURRENT | MCL_FUTURE)) {
-               RTE_LOG(NOTICE, USER1, "mlockall() failed with error \"%s\"\n",
+               TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n",
                        strerror(errno));
        }
 
@@ -2365,7 +2480,7 @@ main(int argc, char** argv)
 
        nb_ports = (portid_t) rte_eth_dev_count();
        if (nb_ports == 0)
-               RTE_LOG(WARNING, EAL, "No probed ethernet devices\n");
+               TESTPMD_LOG(WARNING, "No probed ethernet devices\n");
 
        /* allocate port structures, and init them */
        init_port();
@@ -2456,6 +2571,8 @@ main(int argc, char** argv)
                char c;
                int rc;
 
+               f_quit = 0;
+
                printf("No commandline core given, start packet forwarding\n");
                start_packet_forwarding(tx_first);
                if (stats_period != 0) {
@@ -2465,7 +2582,7 @@ main(int argc, char** argv)
                        /* Convert to number of cycles */
                        timer_period = stats_period * rte_get_timer_hz();
 
-                       while (1) {
+                       while (f_quit == 0) {
                                cur_time = rte_get_timer_cycles();
                                diff_time += cur_time - prev_time;