mempool: fix alignment of memzone length when populating

[dpdk.git] / config / common_base

diff --git a/config/common_base b/config/common_base
index 348228b..0d181ac 100644 (file)
--- a/config/common_base
+++ b/config/common_base
@@ -61,7 +61,20 @@ CONFIG_RTE_CACHE_LINE_SIZE=64
 CONFIG_RTE_LIBRTE_EAL=y
 CONFIG_RTE_MAX_LCORE=128
 CONFIG_RTE_MAX_NUMA_NODES=8
-CONFIG_RTE_MAX_MEMSEG=256
+CONFIG_RTE_MAX_MEMSEG_LISTS=64
+# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
+# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
+CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
+CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
+# a "type" is a combination of page size and NUMA node. total number of memseg
+# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
+# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
+# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
+# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
+CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
+CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
+# global maximum usable amount of VA, in megabytes
+CONFIG_RTE_MAX_MEM_MB=524288
 CONFIG_RTE_MAX_MEMZONE=2560
 CONFIG_RTE_MAX_TAILQ=32
 CONFIG_RTE_ENABLE_ASSERT=n
@@ -74,8 +87,10 @@ CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
 CONFIG_RTE_EAL_IGB_UIO=n
 CONFIG_RTE_EAL_VFIO=n
 CONFIG_RTE_MAX_VFIO_GROUPS=64
+CONFIG_RTE_MAX_VFIO_CONTAINERS=64
 CONFIG_RTE_MALLOC_DEBUG=n
 CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
+CONFIG_RTE_USE_LIBBSD=n
 
 #
 # Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
@@ -143,6 +158,12 @@ CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
 CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
 
+#
+# Compile AMD PMD
+#
+CONFIG_RTE_LIBRTE_AXGBE_PMD=y
+CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
+
 #
 # Compile burst-oriented Broadcom PMD driver
 #
@@ -303,11 +324,6 @@ CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
 # Compile software PMD backed by SZEDATA2 device
 #
 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
-#
-# Defines firmware type address space.
-# See documentation for supported values.
-# Other values raise compile time error.
-CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
 
 #
 # Compile burst-oriented Cavium Thunderx NICVF PMD driver
@@ -458,9 +474,6 @@ CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS=2048
 # NXP DPAA caam - crypto driver
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX=n
 CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
 CONFIG_RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS=2048
 
@@ -478,6 +491,20 @@ CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
 #
 CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
 
+#
+# Compile PMD for virtio crypto devices
+#
+CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
+#
+# Number of maximum virtio crypto devices
+#
+CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
+#
+# Number of sessions to create in the session memory pool
+# on a single virtio crypto device.
+#
+CONFIG_RTE_VIRTIO_CRYPTO_PMD_MAX_NB_SESSIONS=1024
+
 #
 # Compile PMD for AESNI backed device
 #
@@ -525,6 +552,12 @@ CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER_DEBUG=n
 #
 CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
 
+#
+# Compile PMD for AMD CCP crypto device
+#
+CONFIG_RTE_LIBRTE_PMD_CCP=n
+CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=n
+
 #
 # Compile PMD for Marvell Crypto device
 #
@@ -543,6 +576,7 @@ CONFIG_RTE_LIBRTE_EVENTDEV=y
 CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
 CONFIG_RTE_EVENT_MAX_DEVS=16
 CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
+CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
 
 #
 # Compile PMD for skeleton event device
@@ -583,6 +617,16 @@ CONFIG_RTE_LIBRTE_RAWDEV=y
 CONFIG_RTE_RAWDEV_MAX_DEVS=10
 CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
 
+#
+# Compile PMD for NXP DPAA2 CMDIF raw device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
+
+#
+# Compile PMD for NXP DPAA2 QDMA raw device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
+
 #
 # Compile librte_ring
 #
@@ -599,6 +643,8 @@ CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
 #
 # Compile Mempool drivers
 #
+CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
+CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
 CONFIG_RTE_DRIVER_MEMPOOL_RING=y
 CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
 
@@ -788,6 +834,13 @@ CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
 #
 CONFIG_RTE_LIBRTE_PMD_VHOST=n
 
+#
+# Compile IFCVF driver
+# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
+# should be enabled.
+#
+CONFIG_RTE_LIBRTE_IFCVF_VDPA_PMD=n
+
 #
 # Compile the test application
 #