eal: deprecate function to set default mbuf pool

[dpdk.git] / config / common_base

diff --git a/config/common_base b/config/common_base
index de575d3..6b0d1cb 100644 (file)
--- a/config/common_base
+++ b/config/common_base
@@ -138,6 +138,11 @@ CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS=n
 #
 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
 
+#
+# Compile the Intel FPGA bus
+#
+CONFIG_RTE_LIBRTE_IFPGA_BUS=y
+
 #
 # Compile PCI bus driver
 #
@@ -288,15 +293,14 @@ CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
 CONFIG_RTE_LIBRTE_MLX4_PMD=n
 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
 CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
-CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
 
 #
-# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
+# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
+# (MLX5) PMD
 #
 CONFIG_RTE_LIBRTE_MLX5_PMD=n
 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
 CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
-CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
 
 #
 # Compile burst-oriented Netronome NFP PMD driver
@@ -440,6 +444,7 @@ CONFIG_RTE_PMD_PACKET_PREFETCH=y
 #
 CONFIG_RTE_LIBRTE_BBDEV=y
 CONFIG_RTE_BBDEV_MAX_DEVS=128
+CONFIG_RTE_BBDEV_OFFLOAD_COST=n
 
 #
 # Compile PMD for NULL bbdev device
@@ -556,7 +561,6 @@ CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
 # Compile PMD for AMD CCP crypto device
 #
 CONFIG_RTE_LIBRTE_PMD_CCP=n
-CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=n
 
 #
 # Compile PMD for Marvell Crypto device
@@ -569,6 +573,22 @@ CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO_DEBUG=n
 #
 CONFIG_RTE_LIBRTE_SECURITY=y
 
+#
+# Compile generic compression device library
+#
+CONFIG_RTE_LIBRTE_COMPRESSDEV=y
+CONFIG_RTE_COMPRESS_MAX_DEVS=64
+
+#
+# Compile compressdev unit test
+#
+CONFIG_RTE_COMPRESSDEV_TEST=n
+
+#
+# Compile PMD for ISA-L compression device
+#
+CONFIG_RTE_LIBRTE_PMD_ISAL=n
+
 #
 # Compile generic event device library
 #
@@ -628,6 +648,11 @@ CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
 
+#
+# Compile PMD for Intel FPGA raw device
+#
+CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
+
 #
 # Compile librte_ring
 #
@@ -842,6 +867,13 @@ CONFIG_RTE_LIBRTE_PMD_VHOST=n
 #
 CONFIG_RTE_LIBRTE_IFCVF_VDPA_PMD=n
 
+#
+# Compile librte_bpf
+#
+CONFIG_RTE_LIBRTE_BPF=y
+# allow load BPF from ELF files (requires libelf)
+CONFIG_RTE_LIBRTE_BPF_ELF=n
+
 #
 # Compile the test application
 #