eal: deprecate function to set default mbuf pool

[dpdk.git] / config / common_base

diff --git a/config/common_base b/config/common_base
index f557e6b..6b0d1cb 100644 (file)
--- a/config/common_base
+++ b/config/common_base
@@ -87,6 +87,7 @@ CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
 CONFIG_RTE_EAL_IGB_UIO=n
 CONFIG_RTE_EAL_VFIO=n
 CONFIG_RTE_MAX_VFIO_GROUPS=64
+CONFIG_RTE_MAX_VFIO_CONTAINERS=64
 CONFIG_RTE_MALLOC_DEBUG=n
 CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
 CONFIG_RTE_USE_LIBBSD=n
@@ -137,6 +138,11 @@ CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS=n
 #
 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
 
+#
+# Compile the Intel FPGA bus
+#
+CONFIG_RTE_LIBRTE_IFPGA_BUS=y
+
 #
 # Compile PCI bus driver
 #
@@ -157,6 +163,12 @@ CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
 CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
 
+#
+# Compile AMD PMD
+#
+CONFIG_RTE_LIBRTE_AXGBE_PMD=y
+CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
+
 #
 # Compile burst-oriented Broadcom PMD driver
 #
@@ -281,15 +293,14 @@ CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
 CONFIG_RTE_LIBRTE_MLX4_PMD=n
 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
 CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
-CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
 
 #
-# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
+# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
+# (MLX5) PMD
 #
 CONFIG_RTE_LIBRTE_MLX5_PMD=n
 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
 CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
-CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
 
 #
 # Compile burst-oriented Netronome NFP PMD driver
@@ -317,11 +328,6 @@ CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
 # Compile software PMD backed by SZEDATA2 device
 #
 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
-#
-# Defines firmware type address space.
-# See documentation for supported values.
-# Other values raise compile time error.
-CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
 
 #
 # Compile burst-oriented Cavium Thunderx NICVF PMD driver
@@ -438,6 +444,7 @@ CONFIG_RTE_PMD_PACKET_PREFETCH=y
 #
 CONFIG_RTE_LIBRTE_BBDEV=y
 CONFIG_RTE_BBDEV_MAX_DEVS=128
+CONFIG_RTE_BBDEV_OFFLOAD_COST=n
 
 #
 # Compile PMD for NULL bbdev device
@@ -472,9 +479,6 @@ CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS=2048
 # NXP DPAA caam - crypto driver
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX=n
 CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
 CONFIG_RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS=2048
 
@@ -492,6 +496,20 @@ CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
 #
 CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
 
+#
+# Compile PMD for virtio crypto devices
+#
+CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
+#
+# Number of maximum virtio crypto devices
+#
+CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
+#
+# Number of sessions to create in the session memory pool
+# on a single virtio crypto device.
+#
+CONFIG_RTE_VIRTIO_CRYPTO_PMD_MAX_NB_SESSIONS=1024
+
 #
 # Compile PMD for AESNI backed device
 #
@@ -539,17 +557,38 @@ CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER_DEBUG=n
 #
 CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
 
+#
+# Compile PMD for AMD CCP crypto device
+#
+CONFIG_RTE_LIBRTE_PMD_CCP=n
+
 #
 # Compile PMD for Marvell Crypto device
 #
-CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO=n
-CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO_DEBUG=n
+CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
+CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO_DEBUG=n
 
 #
 # Compile generic security library
 #
 CONFIG_RTE_LIBRTE_SECURITY=y
 
+#
+# Compile generic compression device library
+#
+CONFIG_RTE_LIBRTE_COMPRESSDEV=y
+CONFIG_RTE_COMPRESS_MAX_DEVS=64
+
+#
+# Compile compressdev unit test
+#
+CONFIG_RTE_COMPRESSDEV_TEST=n
+
+#
+# Compile PMD for ISA-L compression device
+#
+CONFIG_RTE_LIBRTE_PMD_ISAL=n
+
 #
 # Compile generic event device library
 #
@@ -557,6 +596,8 @@ CONFIG_RTE_LIBRTE_EVENTDEV=y
 CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
 CONFIG_RTE_EVENT_MAX_DEVS=16
 CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
+CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
+CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
 
 #
 # Compile PMD for skeleton event device
@@ -597,6 +638,21 @@ CONFIG_RTE_LIBRTE_RAWDEV=y
 CONFIG_RTE_RAWDEV_MAX_DEVS=10
 CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
 
+#
+# Compile PMD for NXP DPAA2 CMDIF raw device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
+
+#
+# Compile PMD for NXP DPAA2 QDMA raw device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
+
+#
+# Compile PMD for Intel FPGA raw device
+#
+CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
+
 #
 # Compile librte_ring
 #
@@ -613,6 +669,8 @@ CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
 #
 # Compile Mempool drivers
 #
+CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
+CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
 CONFIG_RTE_DRIVER_MEMPOOL_RING=y
 CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
 
@@ -802,6 +860,20 @@ CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
 #
 CONFIG_RTE_LIBRTE_PMD_VHOST=n
 
+#
+# Compile IFCVF driver
+# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
+# should be enabled.
+#
+CONFIG_RTE_LIBRTE_IFCVF_VDPA_PMD=n
+
+#
+# Compile librte_bpf
+#
+CONFIG_RTE_LIBRTE_BPF=y
+# allow load BPF from ELF files (requires libelf)
+CONFIG_RTE_LIBRTE_BPF_ELF=n
+
 #
 # Compile the test application
 #