net/softnic: add connection agent

[dpdk.git] / config / common_base

diff --git a/config/common_base b/config/common_base
index 7e45412..cf73a75 100644 (file)
--- a/config/common_base
+++ b/config/common_base
@@ -87,6 +87,7 @@ CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
 CONFIG_RTE_EAL_IGB_UIO=n
 CONFIG_RTE_EAL_VFIO=n
 CONFIG_RTE_MAX_VFIO_GROUPS=64
+CONFIG_RTE_MAX_VFIO_CONTAINERS=64
 CONFIG_RTE_MALLOC_DEBUG=n
 CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
 CONFIG_RTE_USE_LIBBSD=n
@@ -137,6 +138,11 @@ CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS=n
 #
 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
 
+#
+# Compile the Intel FPGA bus
+#
+CONFIG_RTE_LIBRTE_IFPGA_BUS=y
+
 #
 # Compile PCI bus driver
 #
@@ -258,8 +264,6 @@ CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
-# interval up to 8160 us, aligned to 2 (or default value)
-CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
 
 #
 # Compile burst-oriented FM10K PMD
@@ -287,15 +291,14 @@ CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
 CONFIG_RTE_LIBRTE_MLX4_PMD=n
 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
 CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
-CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
 
 #
-# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
+# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
+# (MLX5) PMD
 #
 CONFIG_RTE_LIBRTE_MLX5_PMD=n
 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
 CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
-CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
 
 #
 # Compile burst-oriented Netronome NFP PMD driver
@@ -421,7 +424,7 @@ CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
 #
 # Compile SOFTNIC PMD
 #
-CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y
+CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
 
 #
 # Compile the TAP PMD
@@ -439,6 +442,7 @@ CONFIG_RTE_PMD_PACKET_PREFETCH=y
 #
 CONFIG_RTE_LIBRTE_BBDEV=y
 CONFIG_RTE_BBDEV_MAX_DEVS=128
+CONFIG_RTE_BBDEV_OFFLOAD_COST=n
 
 #
 # Compile PMD for NULL bbdev device
@@ -454,7 +458,6 @@ CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n
 # Compile generic crypto device library
 #
 CONFIG_RTE_LIBRTE_CRYPTODEV=y
-CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
 CONFIG_RTE_CRYPTO_MAX_DEVS=64
 
 #
@@ -467,28 +470,21 @@ CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
 # Compile NXP DPAA2 crypto sec driver for CAAM HW
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
-CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS=2048
 
 #
 # NXP DPAA caam - crypto driver
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
 CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
-CONFIG_RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS=2048
 
 #
 # Compile PMD for QuickAssist based devices
 #
 CONFIG_RTE_LIBRTE_PMD_QAT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
 #
-# Number of sessions to create in the session memory pool
-# on a single QuickAssist device.
+# Max. number of QuickAssist devices, which can be detected and attached
 #
-CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
+CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
 
 #
 # Compile PMD for virtio crypto devices
@@ -498,29 +494,21 @@ CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
 # Number of maximum virtio crypto devices
 #
 CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
-#
-# Number of sessions to create in the session memory pool
-# on a single virtio crypto device.
-#
-CONFIG_RTE_VIRTIO_CRYPTO_PMD_MAX_NB_SESSIONS=1024
 
 #
 # Compile PMD for AESNI backed device
 #
 CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
 
 #
 # Compile PMD for Software backed device
 #
 CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
-CONFIG_RTE_LIBRTE_PMD_OPENSSL_DEBUG=n
 
 #
 # Compile PMD for AESNI GCM device
 #
 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
-CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n
 
 #
 # Compile PMD for SNOW 3G device
@@ -532,19 +520,15 @@ CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
 # Compile PMD for KASUMI device
 #
 CONFIG_RTE_LIBRTE_PMD_KASUMI=n
-CONFIG_RTE_LIBRTE_PMD_KASUMI_DEBUG=n
 
 #
 # Compile PMD for ZUC device
 #
 CONFIG_RTE_LIBRTE_PMD_ZUC=n
-CONFIG_RTE_LIBRTE_PMD_ZUC_DEBUG=n
 
-#
 # Compile PMD for Crypto Scheduler device
 #
 CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
-CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER_DEBUG=n
 
 #
 # Compile PMD for NULL Crypto device
@@ -555,19 +539,34 @@ CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
 # Compile PMD for AMD CCP crypto device
 #
 CONFIG_RTE_LIBRTE_PMD_CCP=n
-CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH=n
 
 #
 # Compile PMD for Marvell Crypto device
 #
-CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO=n
-CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO_DEBUG=n
+CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
+CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO_DEBUG=n
 
 #
 # Compile generic security library
 #
 CONFIG_RTE_LIBRTE_SECURITY=y
 
+#
+# Compile generic compression device library
+#
+CONFIG_RTE_LIBRTE_COMPRESSDEV=y
+CONFIG_RTE_COMPRESS_MAX_DEVS=64
+
+#
+# Compile compressdev unit test
+#
+CONFIG_RTE_COMPRESSDEV_TEST=n
+
+#
+# Compile PMD for ISA-L compression device
+#
+CONFIG_RTE_LIBRTE_PMD_ISAL=n
+
 #
 # Compile generic event device library
 #
@@ -576,6 +575,8 @@ CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
 CONFIG_RTE_EVENT_MAX_DEVS=16
 CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
 CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
+CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
+CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
 
 #
 # Compile PMD for skeleton event device
@@ -616,6 +617,21 @@ CONFIG_RTE_LIBRTE_RAWDEV=y
 CONFIG_RTE_RAWDEV_MAX_DEVS=10
 CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
 
+#
+# Compile PMD for NXP DPAA2 CMDIF raw device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
+
+#
+# Compile PMD for NXP DPAA2 QDMA raw device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
+
+#
+# Compile PMD for Intel FPGA raw device
+#
+CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
+
 #
 # Compile librte_ring
 #
@@ -632,6 +648,8 @@ CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
 #
 # Compile Mempool drivers
 #
+CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
+CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
 CONFIG_RTE_DRIVER_MEMPOOL_RING=y
 CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
 
@@ -821,6 +839,20 @@ CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
 #
 CONFIG_RTE_LIBRTE_PMD_VHOST=n
 
+#
+# Compile IFC driver
+# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
+# should be enabled.
+#
+CONFIG_RTE_LIBRTE_IFC_PMD=n
+
+#
+# Compile librte_bpf
+#
+CONFIG_RTE_LIBRTE_BPF=y
+# allow load BPF from ELF files (requires libelf)
+CONFIG_RTE_LIBRTE_BPF_ELF=n
+
 #
 # Compile the test application
 #