net/mlx5: support ConnectX-5 devices

[dpdk.git] / config / common_base

diff --git a/config/common_base b/config/common_base
index abd6a64..f2e030c 100644 (file)
--- a/config/common_base
+++ b/config/common_base
@@ -88,7 +88,8 @@ CONFIG_RTE_MAX_NUMA_NODES=8
 CONFIG_RTE_MAX_MEMSEG=256
 CONFIG_RTE_MAX_MEMZONE=2560
 CONFIG_RTE_MAX_TAILQ=32
-CONFIG_RTE_LOG_LEVEL=8
+CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
+CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
 CONFIG_RTE_LOG_HISTORY=256
 CONFIG_RTE_LIBEAL_USE_HPET=n
 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
@@ -100,14 +101,6 @@ CONFIG_RTE_MALLOC_DEBUG=n
 # Default driver path (or "" to disable)
 CONFIG_RTE_EAL_PMD_PATH=""
 
-#
-# Special configurations in PCI Config Space for high performance
-# They are all deprecated, and will be removed later.
-#
-CONFIG_RTE_PCI_CONFIG=n
-CONFIG_RTE_PCI_EXTENDED_TAG=""
-CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
-
 #
 # Compile Environment Abstraction Layer to support Vmware TSC map
 #
@@ -129,6 +122,14 @@ CONFIG_RTE_LIBRTE_IEEE1588=n
 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
 
+#
+# Turn off Tx preparation stage
+#
+# Warning: rte_ethdev_tx_prepare() can be safely disabled only if using a
+# driver which do not implement any Tx preparation.
+#
+CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
+
 #
 # Support NIC bypass logic
 #
@@ -211,12 +212,10 @@ CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
 CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
 
 #
-# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
+# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
 #
 CONFIG_RTE_LIBRTE_MLX5_PMD=n
 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
-CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
 CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
 
 #
@@ -252,6 +251,18 @@ CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
 CONFIG_RTE_LIBRTE_NFP_PMD=n
 CONFIG_RTE_LIBRTE_NFP_DEBUG=n
 
+#
+# Compile burst-oriented Broadcom BNXT PMD driver
+#
+CONFIG_RTE_LIBRTE_BNXT_PMD=y
+
+#
+# Compile burst-oriented Solarflare libefx-based PMD
+#
+CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
+CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
+CONFIG_RTE_LIBRTE_SFC_EFX_TSO=n
+
 #
 # Compile software PMD backed by SZEDATA2 device
 #
@@ -266,6 +277,16 @@ CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
 # Other values raise compile time error
 CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
 
+#
+# Compile burst-oriented Cavium Thunderx NICVF PMD driver
+#
+CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n
+CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_MBOX=n
+
 #
 # Compile burst-oriented VIRTIO PMD driver
 #
@@ -276,6 +297,11 @@ CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
 
+#
+# Compile virtio device emulation inside virtio PMD driver
+#
+CONFIG_RTE_VIRTIO_USER=n
+
 #
 # Compile burst-oriented VMXNET3 PMD driver
 #
@@ -305,11 +331,29 @@ CONFIG_RTE_LIBRTE_PMD_BOND=y
 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
 
+# QLogic 10G/25G/40G/50G/100G PMD
+#
+CONFIG_RTE_LIBRTE_QEDE_PMD=y
+CONFIG_RTE_LIBRTE_QEDE_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO=n
+CONFIG_RTE_LIBRTE_QEDE_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
+#Provides abs path/name of the firmware file.
+#Empty string denotes driver will use default firmware
+CONFIG_RTE_LIBRTE_QEDE_FW=""
+
 #
 # Compile software PMD backed by AF_PACKET sockets (Linux only)
 #
 CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
 
+#
+# Compile the TAP PMD
+# It is enabled by default for Linux only.
+#
+CONFIG_RTE_LIBRTE_PMD_TAP=n
+
 #
 # Compile Xen PMD
 #
@@ -327,7 +371,6 @@ CONFIG_RTE_PMD_PACKET_PREFETCH=y
 
 #
 # Compile generic crypto device library
-# EXPERIMENTAL: API may change without prior notice
 #
 CONFIG_RTE_LIBRTE_CRYPTODEV=y
 CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
@@ -354,6 +397,12 @@ CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
 CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
 CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
 
+#
+# Compile PMD for Software backed device
+#
+CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
+CONFIG_RTE_LIBRTE_PMD_OPENSSL_DEBUG=n
+
 #
 # Compile PMD for AESNI GCM device
 #
@@ -366,6 +415,18 @@ CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n
 CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
 CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
 
+#
+# Compile PMD for KASUMI device
+#
+CONFIG_RTE_LIBRTE_PMD_KASUMI=n
+CONFIG_RTE_LIBRTE_PMD_KASUMI_DEBUG=n
+
+#
+# Compile PMD for ZUC device
+#
+CONFIG_RTE_LIBRTE_PMD_ZUC=n
+CONFIG_RTE_LIBRTE_PMD_ZUC_DEBUG=n
+
 #
 # Compile PMD for NULL Crypto device
 #
@@ -391,6 +452,7 @@ CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
 #
 CONFIG_RTE_LIBRTE_MBUF=y
 CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
+CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
 CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
 CONFIG_RTE_PKTMBUF_HEADROOM=128
 
@@ -505,21 +567,19 @@ CONFIG_RTE_PIPELINE_STATS_COLLECT=n
 CONFIG_RTE_LIBRTE_KNI=n
 CONFIG_RTE_KNI_KMOD=n
 CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
-CONFIG_RTE_KNI_KO_DEBUG=n
 CONFIG_RTE_KNI_VHOST=n
 CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
 CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
-CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
-CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
 
 #
-# Compile vhost library
-# fuse-devel is needed to run vhost-cuse.
-# fuse-devel enables user space char driver development
-# vhost-user is turned on by default.
+# Compile the pdump library
+#
+CONFIG_RTE_LIBRTE_PDUMP=y
+
+#
+# Compile vhost user library
 #
 CONFIG_RTE_LIBRTE_VHOST=n
-CONFIG_RTE_LIBRTE_VHOST_USER=y
 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
 CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
 
@@ -534,15 +594,11 @@ CONFIG_RTE_LIBRTE_PMD_VHOST=n
 #
 CONFIG_RTE_LIBRTE_XEN_DOM0=n
 
-#
-# Enable warning directives
-#
-CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
-
 #
 # Compile the test application
 #
 CONFIG_RTE_APP_TEST=y
+CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
 
 #
 # Compile the PMD test application