.. SPDX-License-Identifier: BSD-3-Clause
- Copyright(c) 2015-2016 Intel Corporation.
+ Copyright(c) 2015-2019 Intel Corporation.
Intel(R) QuickAssist (QAT) Crypto Poll Mode Driver
==================================================
-The QAT PMD provides poll mode crypto driver support for the following
-hardware accelerator devices:
+QAT documentation consists of three parts:
+
+* Details of the symmetric and asymmetric crypto services below.
+* Details of the :doc:`compression service <../compressdevs/qat_comp>`
+ in the compressdev drivers section.
+* Details of building the common QAT infrastructure and the PMDs to support the
+ above services. See :ref:`building_qat` below.
+
+
+Symmetric Crypto Service on QAT
+-------------------------------
+
+The QAT symmetric crypto PMD (hereafter referred to as `QAT SYM [PMD]`) provides
+poll mode crypto driver support for the following hardware accelerator devices:
* ``Intel QuickAssist Technology DH895xCC``
* ``Intel QuickAssist Technology C62x``
* ``Intel QuickAssist Technology C3xxx``
+* ``Intel QuickAssist Technology 200xx``
* ``Intel QuickAssist Technology D15xx``
+* ``Intel QuickAssist Technology C4xxx``
Features
---------
+~~~~~~~~
-The QAT PMD has support for:
+The QAT SYM PMD has support for:
Cipher algorithms:
* ``RTE_CRYPTO_CIPHER_AES128_CTR``
* ``RTE_CRYPTO_CIPHER_AES192_CTR``
* ``RTE_CRYPTO_CIPHER_AES256_CTR``
+* ``RTE_CRYPTO_CIPHER_AES_XTS``
* ``RTE_CRYPTO_CIPHER_SNOW3G_UEA2``
* ``RTE_CRYPTO_CIPHER_NULL``
* ``RTE_CRYPTO_CIPHER_KASUMI_F8``
Hash algorithms:
+* ``RTE_CRYPTO_AUTH_SHA1``
* ``RTE_CRYPTO_AUTH_SHA1_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA224``
* ``RTE_CRYPTO_AUTH_SHA224_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA256``
* ``RTE_CRYPTO_AUTH_SHA256_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA384``
* ``RTE_CRYPTO_AUTH_SHA384_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA512``
* ``RTE_CRYPTO_AUTH_SHA512_HMAC``
* ``RTE_CRYPTO_AUTH_AES_XCBC_MAC``
* ``RTE_CRYPTO_AUTH_SNOW3G_UIA2``
* ``RTE_CRYPTO_AUTH_KASUMI_F9``
* ``RTE_CRYPTO_AUTH_AES_GMAC``
* ``RTE_CRYPTO_AUTH_ZUC_EIA3``
+* ``RTE_CRYPTO_AUTH_AES_CMAC``
Supported AEAD algorithms:
* ``RTE_CRYPTO_AEAD_AES_GCM``
+* ``RTE_CRYPTO_AEAD_AES_CCM``
+* ``RTE_CRYPTO_AEAD_CHACHA20_POLY1305``
+
+Protocol offloads:
+
+* ``RTE_SECURITY_PROTOCOL_DOCSIS``
+
+Supported Chains
+~~~~~~~~~~~~~~~~
+
+All the usual chains are supported and also some mixed chains:
+
+.. table:: Supported hash-cipher chains for wireless digest-encrypted cases
+
+ +------------------+-----------+-------------+----------+----------+
+ | Cipher algorithm | NULL AUTH | SNOW3G UIA2 | ZUC EIA3 | AES CMAC |
+ +==================+===========+=============+==========+==========+
+ | NULL CIPHER | Y | 2&3 | 2&3 | Y |
+ +------------------+-----------+-------------+----------+----------+
+ | SNOW3G UEA2 | 2&3 | Y | 2&3 | 2&3 |
+ +------------------+-----------+-------------+----------+----------+
+ | ZUC EEA3 | 2&3 | 2&3 | 2&3 | 2&3 |
+ +------------------+-----------+-------------+----------+----------+
+ | AES CTR | Y | 2&3 | 2&3 | Y |
+ +------------------+-----------+-------------+----------+----------+
+
+* The combinations marked as "Y" are supported on all QAT hardware versions.
+* The combinations marked as "2&3" are supported on GEN2/GEN3 QAT hardware only.
Limitations
------------
+~~~~~~~~~~~
* Only supports the session-oriented API implementation (session-less APIs are not supported).
* SNOW 3G (UEA2), KASUMI (F8) and ZUC (EEA3) supported only if cipher length and offset fields are byte-multiple.
* SNOW 3G (UIA2) and ZUC (EIA3) supported only if hash length and offset fields are byte-multiple.
* No BSD support as BSD QAT kernel driver not available.
* ZUC EEA3/EIA3 is not supported by dh895xcc devices
-* Maximum additional authenticated data (AAD) for GCM is 240 bytes long.
-* Queue pairs are not thread-safe (that is, within a single queue pair, RX and TX from different lcores is not supported).
-
+* Maximum additional authenticated data (AAD) for GCM is 240 bytes long and must be passed to the device in a buffer rounded up to the nearest block-size multiple (x16) and padded with zeros.
+* Queue-pairs are thread-safe on Intel CPUs but Queues are not (that is, within a single
+ queue-pair all enqueues to the TX queue must be done from one thread and all dequeues
+ from the RX queue must be done from one thread, but enqueues and dequeues may be done
+ in different threads.)
+* A GCM limitation exists, but only in the case where there are multiple
+ generations of QAT devices on a single platform.
+ To optimise performance, the GCM crypto session should be initialised for the
+ device generation to which the ops will be enqueued. Specifically if a GCM
+ session is initialised on a GEN2 device, but then attached to an op enqueued
+ to a GEN3 device, it will work but cannot take advantage of hardware
+ optimisations in the GEN3 device. And if a GCM session is initialised on a
+ GEN3 device, then attached to an op sent to a GEN1/GEN2 device, it will not be
+ enqueued to the device and will be marked as failed. The simplest way to
+ mitigate this is to use the PCI allowlist to avoid mixing devices of different
+ generations in the same process if planning to use for GCM.
+* The mixed algo feature on GEN2 is not supported by all kernel drivers. Check
+ the notes under the Available Kernel Drivers table below for specific details.
+* Out-of-place is not supported for combined Crypto-CRC DOCSIS security
+ protocol.
+* ``RTE_CRYPTO_CIPHER_DES_DOCSISBPI`` is not supported for combined Crypto-CRC
+ DOCSIS security protocol.
+* Multi-segment buffers are not supported for combined Crypto-CRC DOCSIS
+ security protocol.
Extra notes on KASUMI F9
-------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~
When using KASUMI F9 authentication algorithm, the input buffer must be
constructed according to the
Also, offset of data to authenticate "op.sym.auth.data.offset"
must be such that points at the start of the COUNT bytes.
+Asymmetric Crypto Service on QAT
+--------------------------------
-Building the DPDK QAT cryptodev PMD
------------------------------------
+The QAT asymmetric crypto PMD (hereafter referred to as `QAT ASYM [PMD]`) provides
+poll mode crypto driver support for the following hardware accelerator devices:
+* ``Intel QuickAssist Technology DH895xCC``
+* ``Intel QuickAssist Technology C62x``
+* ``Intel QuickAssist Technology C3xxx``
+* ``Intel QuickAssist Technology D15xx``
+* ``Intel QuickAssist Technology C4xxx``
-To enable QAT crypto in DPDK, follow the instructions for modifying the compile-time
-configuration file as described `here <http://dpdk.org/doc/guides/linux_gsg/build_dpdk.html>`_.
+The QAT ASYM PMD has support for:
+* ``RTE_CRYPTO_ASYM_XFORM_MODEX``
+* ``RTE_CRYPTO_ASYM_XFORM_MODINV``
-Quick instructions are as follows:
+Limitations
+~~~~~~~~~~~
-.. code-block:: console
+* Big integers longer than 4096 bits are not supported.
+* Queue-pairs are thread-safe on Intel CPUs but Queues are not (that is, within a single
+ queue-pair all enqueues to the TX queue must be done from one thread and all dequeues
+ from the RX queue must be done from one thread, but enqueues and dequeues may be done
+ in different threads.)
+* RSA-2560, RSA-3584 are not supported
- cd to the top-level DPDK directory
- make config T=x86_64-native-linuxapp-gcc
- sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_QAT\)=n,\1=y,' build/.config
- sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_QAT_SYM\)=n,\1=y,' build/.config
- make
+.. _building_qat:
+Building PMDs on QAT
+--------------------
-.. _qat_kernel_installation:
+A QAT device can host multiple acceleration services:
-Dependency on the QAT kernel driver
------------------------------------
+* symmetric cryptography
+* data compression
+* asymmetric cryptography
-To use the QAT PMD an SRIOV-enabled QAT kernel driver is required. The VF
-devices created and initialised by this driver will be used by the QAT PMD.
+These services are provided to DPDK applications via PMDs which register to
+implement the corresponding cryptodev and compressdev APIs. The PMDs use
+common QAT driver code which manages the QAT PCI device. They also depend on a
+QAT kernel driver being installed on the platform, see :ref:`qat_kernel` below.
-Instructions for installation are below, but first an explanation of the
-relationships between the PF/VF devices and the PMDs visible to
-DPDK applications.
+Configuring and Building the DPDK QAT PMDs
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Acceleration services - cryptography and compression - are provided to DPDK
-applications via PMDs which register to implement the corresponding
-cryptodev and compressdev APIs.
-Each QuickAssist VF device can expose one cryptodev PMD and/or one compressdev PMD.
-These QAT PMDs share the same underlying device and pci-mgmt code, but are
-enumerated independently on their respective APIs and appear as independent
-devices to applications.
+Further information on configuring, building and installing DPDK is described
+:doc:`here <../linux_gsg/build_dpdk>`.
+
+.. _building_qat_config:
+
+Build Configuration
+~~~~~~~~~~~~~~~~~~~
+
+These are the build configuration options affecting QAT, and their default values:
+
+.. code-block:: console
+
+ RTE_PMD_QAT_MAX_PCI_DEVICES=48
+ RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
+
+Both QAT SYM PMD and QAT ASYM PMD have an external dependency on libcrypto, so are not
+built by default.
+
+The QAT compressdev PMD has no external dependencies, so is built by default.
+
+The number of VFs per PF varies - see table below. If multiple QAT packages are
+installed on a platform then RTE_PMD_QAT_MAX_PCI_DEVICES should be
+adjusted to the number of VFs which the QAT common code will need to handle.
.. Note::
- Each VF can only be used by one DPDK process. It is not possible to share
- the same VF across multiple processes, even if these processes are using
- different acceleration services.
+ There are separate config items (not QAT-specific) for max cryptodevs
+ RTE_CRYPTO_MAX_DEVS and max compressdevs RTE_COMPRESS_MAX_DEVS,
+ if necessary these should be adjusted to handle the total of QAT and other
+ devices which the process will use. In particular for crypto, where each
+ QAT VF may expose two crypto devices, sym and asym, it may happen that the
+ number of devices will be bigger than MAX_DEVS and the process will show an error
+ during PMD initialisation. To avoid this problem RTE_CRYPTO_MAX_DEVS may be
+ increased or -a, allow domain:bus:devid:func option may be used.
- Conversely one DPDK process can use one or more QAT VFs and can expose both
- cryptodev and compressdev instances on each of those VFs.
+
+QAT compression PMD needs intermediate buffers to support Deflate compression
+with Dynamic Huffman encoding. RTE_PMD_QAT_COMP_IM_BUFFER_SIZE
+specifies the size of a single buffer, the PMD will allocate a multiple of these,
+plus some extra space for associated meta-data. For GEN2 devices, 20 buffers are
+allocated while for GEN1 devices, 12 buffers are allocated, plus 1472 bytes overhead.
+
+.. Note::
+
+ If the compressed output of a Deflate operation using Dynamic Huffman
+ Encoding is too big to fit in an intermediate buffer, then the
+ operation will be split into smaller operations and their results will
+ be merged afterwards.
+ This is not possible if any checksum calculation was requested - in such
+ case the code falls back to fixed compression.
+ To avoid this less performant case, applications should configure
+ the intermediate buffer size to be larger than the expected input data size
+ (compressed output size is usually unknown, so the only option is to make
+ larger than the input size).
+Running QAT PMD with minimum threshold for burst size
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If only a small number or packets can be enqueued. Each enqueue causes an expensive MMIO write.
+These MMIO write occurrences can be optimised by setting any of the following parameters:
+
+- qat_sym_enq_threshold
+- qat_asym_enq_threshold
+- qat_comp_enq_threshold
+
+When any of these parameters is set rte_cryptodev_enqueue_burst function will
+return 0 (thereby avoiding an MMIO) if the device is congested and number of packets
+possible to enqueue is smaller.
+To use this feature the user must set the parameter on process start as a device additional parameter::
+
+ -a 03:01.1,qat_sym_enq_threshold=32,qat_comp_enq_threshold=16
+
+All parameters can be used with the same device regardless of order. Parameters are separated
+by comma. When the same parameter is used more than once first occurrence of the parameter
+is used.
+Maximum threshold that can be set is 32.
+
Device and driver naming
-------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~
-* The qat cryptodev driver name is "crypto_qat".
- The "rte_cryptodev_devices_get()" returns the devices exposed by this driver.
+* The qat cryptodev symmetric crypto driver name is "crypto_qat".
+* The qat cryptodev asymmetric crypto driver name is "crypto_qat_asym".
-* Each qat crypto device has a unique name, in format
+The "rte_cryptodev_devices_get()" returns the devices exposed by either of these drivers.
+
+* Each qat sym crypto device has a unique name, in format
"<pci bdf>_<service>", e.g. "0000:41:01.0_qat_sym".
+* Each qat asym crypto device has a unique name, in format
+ "<pci bdf>_<service>", e.g. "0000:41:01.0_qat_asym".
This name can be passed to "rte_cryptodev_get_dev_id()" to get the device_id.
.. Note::
- The qat crypto driver name is passed to the dpdk-test-crypto-perf tool in the "-devtype" parameter.
+ The cryptodev driver name is passed to the dpdk-test-crypto-perf tool in the "-devtype" parameter.
- The qat crypto device name is in the format of the slave parameter passed to the crypto scheduler.
+ The qat crypto device name is in the format of the worker parameter passed to the crypto scheduler.
-* The qat compressdev driver name is "qat".
+* The qat compressdev driver name is "compress_qat".
The rte_compressdev_devices_get() returns the devices exposed by this driver.
* Each qat compression device has a unique name, in format
<pci bdf>_<service>, e.g. "0000:41:01.0_qat_comp".
This name can be passed to rte_compressdev_get_dev_id() to get the device_id.
+.. _qat_kernel:
+
+Dependency on the QAT kernel driver
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To use QAT an SRIOV-enabled QAT kernel driver is required. The VF
+devices created and initialised by this driver will be used by the QAT PMDs.
+
+Instructions for installation are below, but first an explanation of the
+relationships between the PF/VF devices and the PMDs visible to
+DPDK applications.
+
+Each QuickAssist PF device exposes a number of VF devices. Each VF device can
+enable one symmetric cryptodev PMD and/or one asymmetric cryptodev PMD and/or
+one compressdev PMD.
+These QAT PMDs share the same underlying device and pci-mgmt code, but are
+enumerated independently on their respective APIs and appear as independent
+devices to applications.
+
+.. Note::
+
+ Each VF can only be used by one DPDK process. It is not possible to share
+ the same VF across multiple processes, even if these processes are using
+ different acceleration services.
+
+ Conversely one DPDK process can use one or more QAT VFs and can expose both
+ cryptodev and compressdev instances on each of those VFs.
+
Available kernel drivers
-------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~
-Kernel drivers for each device are listed in the following table. Scroll right
-to check that the driver and device supports the service you require.
+Kernel drivers for each device for each service are listed in the following table. (Scroll right
+to see the full table)
.. _table_qat_pmds_drivers:
.. table:: QAT device generations, devices and drivers
- +-----+----------+---------------+---------------+------------+--------+------+--------+--------+-----------+-------------+
- | Gen | Device | Driver/ver | Kernel Module | Pci Driver | PF Did | #PFs | VF Did | VFs/PF | cryptodev | compressdev |
- +=====+==========+===============+===============+============+========+======+========+========+===========+=============+
- | 1 | DH895xCC | linux/4.4+ | qat_dh895xcc | dh895xcc | 435 | 1 | 443 | 32 | Yes | No |
- +-----+----------+---------------+---------------+------------+--------+------+--------+--------+-----------+-------------+
- | " | " | 01.org/4.2.0+ | " | " | " | " | " | " | Yes | No |
- +-----+----------+---------------+---------------+------------+--------+------+--------+--------+-----------+-------------+
- | 2 | C62x | linux/4.5+ | qat_c62x | c6xx | 37c8 | 3 | 37c9 | 16 | Yes | No |
- +-----+----------+---------------+---------------+------------+--------+------+--------+--------+-----------+-------------+
- | " | " | 01.org/4.2.0+ | " | " | " | " | " | " | Yes | Yes |
- +-----+----------+---------------+---------------+------------+--------+------+--------+--------+-----------+-------------+
- | 2 | C3xxx | linux/4.5+ | qat_c3xxx | c3xxx | 19e2 | 1 | 19e3 | 16 | Yes | No |
- +-----+----------+---------------+---------------+------------+--------+------+--------+--------+-----------+-------------+
- | " | " | 01.org/4.2.0+ | " | " | " | " | " | " | Yes | Yes |
- +-----+----------+---------------+---------------+------------+--------+------+--------+--------+-----------+-------------+
- | 2 | D15xx | p | qat_d15xx | d15xx | 6f54 | 1 | 6f55 | 16 | Yes | No |
- +-----+----------+---------------+---------------+------------+--------+------+--------+--------+-----------+-------------+
-
+ +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
+ | S | A | C | Gen | Device | Driver/ver | Kernel Module | Pci Driver | PF Did | #PFs | VF Did | VFs/PF |
+ +=====+=====+=====+=====+==========+===============+===============+============+========+======+========+========+
+ | Yes | No | No | 1 | DH895xCC | linux/4.4+ | qat_dh895xcc | dh895xcc | 435 | 1 | 443 | 32 |
+ +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
+ | Yes | Yes | No | " | " | 01.org/4.2.0+ | " | " | " | " | " | " |
+ +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
+ | Yes | Yes | Yes | " | " | 01.org/4.3.0+ | " | " | " | " | " | " |
+ +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
+ | Yes | No | No | 2 | C62x | linux/4.5+ | qat_c62x | c6xx | 37c8 | 3 | 37c9 | 16 |
+ +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
+ | Yes | Yes | Yes | " | " | 01.org/4.2.0+ | " | " | " | " | " | " |
+ +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
+ | Yes | No | No | 2 | C3xxx | linux/4.5+ | qat_c3xxx | c3xxx | 19e2 | 1 | 19e3 | 16 |
+ +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
+ | Yes | Yes | Yes | " | " | 01.org/4.2.0+ | " | " | " | " | " | " |
+ +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
+ | Yes | No | No | 2 | 200xx | p | qat_200xx | 200xx | 18ee | 1 | 18ef | 16 |
+ +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
+ | Yes | No | No | 2 | D15xx | 01.org/4.2.0+ | qat_d15xx | d15xx | 6f54 | 1 | 6f55 | 16 |
+ +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
+ | Yes | No | No | 3 | C4xxx | p | qat_c4xxx | c4xxx | 18a0 | 1 | 18a1 | 128 |
+ +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
+
+* Note: Symmetric mixed crypto algorithms feature on Gen 2 works only with 01.org driver version 4.9.0+
+
+The first 3 columns indicate the service:
+
+* S = Symmetric crypto service (via cryptodev API)
+* A = Asymmetric crypto service (via cryptodev API)
+* C = Compression service (via compressdev API)
The ``Driver`` column indicates either the Linux kernel version in which
support for this device was introduced or a driver available on Intel's 01.org
-website. There are both linux and 01.org kernel drivers available for some
+website. There are both linux in-tree and 01.org kernel drivers available for some
devices. p = release pending.
If you are running on a kernel which includes a driver for your device, see
Installation using kernel.org driver
-------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The examples below are based on the C62x device, if you have a different device
use the corresponding values in the above table.
list 48 VF devices available for a ``C62x`` device.
To complete the installation follow the instructions in
-`Binding the available VFs to the DPDK UIO driver`_.
+`Binding the available VFs to the vfio-pci driver`_.
.. Note::
insmod ./drivers/crypto/qat/qat_common/intel_qat.ko
insmod ./drivers/crypto/qat/qat_dh895xcc/qat_dh895xcc.ko
-
.. Note::
If you see the following warning in ``/var/log/messages`` it can be ignored:
Installation using 01.org QAT driver
-------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Download the latest QuickAssist Technology Driver from `01.org
<https://01.org/packet-processing/intel%C2%AE-quickassist-technology-drivers-and-patches>`_.
lspci -d:37c9
-To complete the installation - follow instructions in `Binding the available VFs to the DPDK UIO driver`_.
+To complete the installation - follow instructions in
+`Binding the available VFs to the vfio-pci driver`_.
.. Note::
sudo yum install kernel-devel-`uname -r`
-Binding the available VFs to the DPDK UIO driver
-------------------------------------------------
+Binding the available VFs to the vfio-pci driver
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Note:
+
+* Please note that due to security issues, the usage of older DPDK igb_uio
+ driver is not recommended. This document shows how to use the more secure
+ vfio-pci driver.
+* If QAT fails to bind to vfio-pci on Linux kernel 5.9+, please see the
+ QATE-39220 and QATE-7495 issues in
+ `01.org doc <https://01.org/sites/default/files/downloads/336211-015-qatsoftwareforlinux-rn-hwv1.7-final.pdf>`_
+ which details the constraint about trusted guests and add `disable_denylist=1`
+ to the vfio-pci params to use QAT. See also `this patch description <https://lkml.org/lkml/2020/7/23/1155>`_.
-Unbind the VFs from the stock driver so they can be bound to the uio driver.
+Unbind the VFs from the stock driver so they can be bound to the vfio-pci driver.
For an Intel(R) QuickAssist Technology DH895xCC device
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The unbind command below assumes ``BDFs`` of ``03:01.00-03:04.07``, if your
VFs are different adjust the unbind command below::
+ cd to the top-level DPDK directory
for device in $(seq 1 4); do \
for fn in $(seq 0 7); do \
- echo -n 0000:03:0${device}.${fn} > \
- /sys/bus/pci/devices/0000\:03\:0${device}.${fn}/driver/unbind; \
+ usertools/dpdk-devbind.py -u 0000:03:0${device}.${fn}; \
done; \
done
For an Intel(R) QuickAssist Technology C62x device
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The unbind command below assumes ``BDFs`` of ``1a:01.00-1a:02.07``,
``3d:01.00-3d:02.07`` and ``3f:01.00-3f:02.07``, if your VFs are different
adjust the unbind command below::
+ cd to the top-level DPDK directory
for device in $(seq 1 2); do \
for fn in $(seq 0 7); do \
- echo -n 0000:1a:0${device}.${fn} > \
- /sys/bus/pci/devices/0000\:1a\:0${device}.${fn}/driver/unbind; \
-
- echo -n 0000:3d:0${device}.${fn} > \
- /sys/bus/pci/devices/0000\:3d\:0${device}.${fn}/driver/unbind; \
-
- echo -n 0000:3f:0${device}.${fn} > \
- /sys/bus/pci/devices/0000\:3f\:0${device}.${fn}/driver/unbind; \
+ usertools/dpdk-devbind.py -u 0000:1a:0${device}.${fn}; \
+ usertools/dpdk-devbind.py -u 0000:3d:0${device}.${fn}; \
+ usertools/dpdk-devbind.py -u 0000:3f:0${device}.${fn}; \
done; \
done
-For Intel(R) QuickAssist Technology C3xxx or D15xx device
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+For Intel(R) QuickAssist Technology C3xxx or 200xx or D15xx device
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The unbind command below assumes ``BDFs`` of ``01:01.00-01:02.07``, if your
VFs are different adjust the unbind command below::
+ cd to the top-level DPDK directory
for device in $(seq 1 2); do \
for fn in $(seq 0 7); do \
- echo -n 0000:01:0${device}.${fn} > \
- /sys/bus/pci/devices/0000\:01\:0${device}.${fn}/driver/unbind; \
+ usertools/dpdk-devbind.py -u 0000:01:0${device}.${fn}; \
done; \
done
-Bind to the DPDK uio driver
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Bind to the vfio-pci driver
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Install the DPDK igb_uio driver, bind the VF PCI Device id to it and use lspci
-to confirm the VF devices are now in use by igb_uio kernel driver,
+Load the vfio-pci driver, bind the VF PCI Device id to it using the
+``dpdk-devbind.py`` script then use the ``--status`` option
+to confirm the VF devices are now in use by vfio-pci kernel driver,
e.g. for the C62x device::
cd to the top-level DPDK directory
- modprobe uio
- insmod ./build/kmod/igb_uio.ko
- echo "8086 37c9" > /sys/bus/pci/drivers/igb_uio/new_id
- lspci -vvd:37c9
+ modprobe vfio-pci
+ usertools/dpdk-devbind.py -b vfio-pci 0000:03:01.1
+ usertools/dpdk-devbind.py --status
-
-Another way to bind the VFs to the DPDK UIO driver is by using the
-``dpdk-devbind.py`` script::
-
- cd to the top-level DPDK directory
- ./usertools/dpdk-devbind.py -b igb_uio 0000:03:01.1
+Use ``modprobe vfio-pci disable_denylist=1`` from kernel 5.9 onwards.
+See note in the section `Binding the available VFs to the vfio-pci driver`_
+above.
Testing
~~~~~~~
-QAT crypto PMD can be tested by running the test application::
+QAT SYM crypto PMD can be tested by running the test application::
- make defconfig
- make test-build -j
- cd ./build/app
- ./test -l1 -n1 -w <your qat bdf>
+ cd ./<build_dir>/app/test
+ ./dpdk-test -l1 -n1 -a <your qat bdf>
RTE>>cryptodev_qat_autotest
+QAT ASYM crypto PMD can be tested by running the test application::
+
+ cd ./<build_dir>/app/test
+ ./dpdk-test -l1 -n1 -a <your qat bdf>
+ RTE>>cryptodev_qat_asym_autotest
+
QAT compression PMD can be tested by running the test application::
- make defconfig
- sed -i 's,\(CONFIG_RTE_COMPRESSDEV_TEST\)=n,\1=y,' build/.config
- make test-build -j
- cd ./build/app
- ./test -l1 -n1 -w <your qat bdf>
+ cd ./<build_dir>/app/test
+ ./dpdk-test -l1 -n1 -a <your qat bdf>
RTE>>compressdev_autotest
Debugging
-----------------------------------------
+~~~~~~~~~
There are 2 sets of trace available via the dynamic logging feature:
-* pmd.qat_dp exposes trace on the data-path.
-* pmd.qat_general exposes all other trace.
+* pmd.qat.dp exposes trace on the data-path.
+* pmd.qat.general exposes all other trace.
pmd.qat exposes both sets of traces.
They can be enabled using the log-level option (where 8=maximum log level) on
the process cmdline, e.g. using any of the following::
- --log-level="pmd.qat_general,8"
- --log-level="pmd.qat_dp,8"
+ --log-level="pmd.qat.general,8"
+ --log-level="pmd.qat.dp,8"
--log-level="pmd.qat,8"
.. Note::
The global RTE_LOG_DP_LEVEL overrides data-path trace so must be set to
RTE_LOG_DEBUG to see all the trace. This variable is in config/rte_config.h
- for meson build and config/common_base for gnu make.
+ for meson build.
Also the dynamic global log level overrides both sets of trace, so e.g. no
QAT trace would display in this case::
- --log-level="7" --log-level="pmd.qat_general,8"
+ --log-level="7" --log-level="pmd.qat.general,8"
git.droids-corp.org / dpdk.git / blobdiff