MLX5 poll mode driver
=====================
-The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support
+The MLX5 poll mode driver library (**librte_net_mlx5**) provides support
for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox
-ConnectX-5**, **Mellanox ConnectX-6**, **Mellanox ConnectX-6 Dx** and
-**Mellanox BlueField** families of 10/25/40/50/100/200 Gb/s adapters
-as well as their virtual functions (VF) in SR-IOV context.
+ConnectX-5**, **Mellanox ConnectX-6**, **Mellanox ConnectX-6 Dx**, **Mellanox
+ConnectX-6 Lx**, **Mellanox BlueField** and **Mellanox BlueField-2** families
+of 10/25/40/50/100/200 Gb/s adapters as well as their virtual functions (VF)
+in SR-IOV context.
Information and documentation about these adapters can be found on the
`Mellanox website <http://www.mellanox.com>`__. Help is also provided by the
There is also a `section dedicated to this poll mode driver
<http://www.mellanox.com/page/products_dyn?product_family=209&mtag=pmd_for_dpdk>`__.
-.. note::
-
- Due to external dependencies, this driver is disabled in default configuration
- of the "make" build. It can be enabled with ``CONFIG_RTE_LIBRTE_MLX5_PMD=y``
- or by using "meson" build system which will detect dependencies.
Design
------
Besides its dependency on libibverbs (that implies libmlx5 and associated
-kernel support), librte_pmd_mlx5 relies heavily on system calls for control
+kernel support), librte_net_mlx5 relies heavily on system calls for control
operations such as querying/updating the MTU and flow control parameters.
For security reasons and robustness, this driver only deals with virtual
- DevX allows to access firmware objects
- Direct Rules manages flow steering at low-level hardware layer
-Enabling librte_pmd_mlx5 causes DPDK applications to be linked against
+Enabling librte_net_mlx5 causes DPDK applications to be linked against
libibverbs.
Features
- Multi arch support: x86_64, POWER8, ARMv8, i686.
- Multiple TX and RX queues.
-- Support for scattered TX and RX frames.
+- Support for scattered TX frames.
+- Advanced support for scattered Rx frames with tunable buffer attributes.
- IPv4, IPv6, TCPv4, TCPv6, UDPv4 and UDPv6 RSS on any number of queues.
- RSS using different combinations of fields: L3 only, L4 only or both,
and source only, destination only or both.
- Per packet no-inline hint flag to disable packet data copying into Tx descriptors.
- Hardware LRO.
- Hairpin.
+- Multiple-thread flow insertion.
+- Matching on GTP extension header with raw encap/decap action.
+- Matching on Geneve TLV option header with raw encap/decap action.
+- RSS support in sample action.
+- E-Switch mirroring and jump.
+- E-Switch mirroring and modify.
+- 21844 flow priorities for ingress or egress flow groups greater than 0 and for any transfer
+ flow group.
Limitations
-----------
+- Windows support:
+
+ On Windows, the features are limited:
+
+ - Promiscuous mode is not supported
+ - The following rules are supported:
+
+ - IPv4/UDP with CVLAN filtering
+ - Unicast MAC filtering
+
- For secondary process:
- Forked secondary process not supported.
Will match any ipv4 packet (VLAN included).
-- When using DV flow engine (``dv_flow_en`` = 1), flow pattern without VLAN item
- will match untagged packets only.
+- When using Verbs flow engine (``dv_flow_en`` = 0), multi-tagged(QinQ) match is not supported.
+
+- When using DV flow engine (``dv_flow_en`` = 1), flow pattern with any VLAN specification will match only single-tagged packets unless the ETH item ``type`` field is 0x88A8 or the VLAN item ``has_more_vlan`` field is 1.
The flow rule::
flow create 0 ingress pattern eth / ipv4 / end ...
- Will match untagged packets only.
- The flow rule::
+ Will match any ipv4 packet.
+ The flow rules::
- flow create 0 ingress pattern eth / vlan / ipv4 / end ...
+ flow create 0 ingress pattern eth / vlan / end ...
+ flow create 0 ingress pattern eth has_vlan is 1 / end ...
+ flow create 0 ingress pattern eth type is 0x8100 / end ...
- Will match tagged packets only, with any VLAN ID value.
- The flow rule::
+ Will match single-tagged packets only, with any VLAN ID value.
+ The flow rules::
- flow create 0 ingress pattern eth / vlan vid is 3 / ipv4 / end ...
+ flow create 0 ingress pattern eth type is 0x88A8 / end ...
+ flow create 0 ingress pattern eth / vlan has_more_vlan is 1 / end ...
+
+ Will match multi-tagged packets only, with any VLAN ID value.
- Will only match tagged packets with VLAN ID 3.
+- A flow pattern with 2 sequential VLAN items is not supported.
- VLAN pop offload command:
- OAM
- protocol type
- options length
- Currently, the only supported options length value is 0.
+
+- Match on Geneve TLV option is supported on the following fields:
+
+ - Class
+ - Type
+ - Length
+ - Data
+
+ Only one Class/Type/Length Geneve TLV option is supported per shared device.
+ Class/Type/Length fields must be specified as well as masks.
+ Class/Type/Length specified masks must be full.
+ Matching Geneve TLV option without specifying data is not supported.
+ Matching Geneve TLV option with ``data & mask == 0`` is not supported.
- VF: flow rules created on VF devices can only match traffic targeted at the
configured MAC addresses (see ``rte_eth_dev_mac_addr_add()``).
- msg_type
- teid
+- Match on GTP extension header only for GTP PDU session container (next
+ extension header type = 0x85).
+- Match on GTP extension header is not supported in group 0.
+
- No Tx metadata go to the E-Switch steering domain for the Flow group 0.
The flows within group 0 and set metadata action are rejected by hardware.
the device. In case of ungraceful program termination, some entries may
remain present and should be removed manually by other means.
+- Buffer split offload is supported with regular Rx burst routine only,
+ no MPRQ feature or vectorized code can be engaged.
+
- When Multi-Packet Rx queue is configured (``mprq_en``), a Rx packet can be
externally attached to a user-provided mbuf with having EXT_ATTACHED_MBUF in
ol_flags. As the mempool for the external buffer is managed by PMD, all the
``txq_inline_max`` and ``txq_inline_mpw`` devargs keys.
- To provide the packet send scheduling on mbuf timestamps the ``tx_pp``
- parameter should be specified, RTE_MBUF_DYNFIELD_TIMESTAMP_NAME and
- RTE_MBUF_DYNFLAG_TIMESTAMP_NAME should be registered by application.
- When PMD sees the RTE_MBUF_DYNFLAG_TIMESTAMP_NAME set on the packet
+ parameter should be specified.
+ When PMD sees the RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME set on the packet
being sent it tries to synchronize the time of packet appearing on
the wire with the specified packet timestamp. It the specified one
is in the past it should be ignored, if one is in the distant future
reported via device xstats to assist applications to detect the
time-related problems.
+ The timestamp upper "too-distant-future" limit
+ at the moment of invoking the Tx burst routine
+ can be estimated as ``tx_pp`` option (in nanoseconds) multiplied by 2^23.
+ Please note, for the testpmd txonly mode,
+ the limit is deduced from the expression::
+
+ (n_tx_descriptors / burst_size + 1) * inter_burst_gap
+
There is no any packet reordering according timestamps is supposed,
neither within packet burst, nor between packets, it is an entirely
application responsibility to generate packets and its timestamps
- The input buffer, providing the removal size, is not validated.
- The buffer size must match the length of the headers to be removed.
-- ICMP/ICMP6 code/type matching, IP-in-IP and MPLS flow matching are all
+- ICMP(code/type/identifier/sequence number) / ICMP6(code/type) matching, IP-in-IP and MPLS flow matching are all
mutually exclusive features which cannot be supported together
(see :ref:`mlx5_firmware_config`).
eth (with or without vlan) / ipv4 or ipv6 / tcp / payload
Other TCP packets (e.g. with MPLS label) received on Rx queue with LRO enabled, will be received with bad checksum.
+ - LRO packet aggregation is performed by HW only for packet size larger than
+ ``lro_min_mss_size``. This value is reported on device start, when debug
+ mode is enabled.
- CRC:
- ``DEV_RX_OFFLOAD_KEEP_CRC`` cannot be supported with decapsulation
- for some NICs (such as ConnectX-6 Dx and BlueField 2).
+ for some NICs (such as ConnectX-6 Dx, ConnectX-6 Lx, and BlueField-2).
The capability bit ``scatter_fcs_w_decap_disable`` shows NIC support.
+- Sample flow:
+
+ - Supports ``RTE_FLOW_ACTION_TYPE_SAMPLE`` action only within NIC Rx and E-Switch steering domain.
+ - The E-Switch Sample flow must have the eswitch_manager VPORT destination (PF or ECPF) and no additional actions.
+ - For ConnectX-5, the ``RTE_FLOW_ACTION_TYPE_SAMPLE`` is typically used as first action in the E-Switch egress flow if with header modify or encapsulation actions.
+
+- IPv6 header item 'proto' field, indicating the next header protocol, should
+ not be set as extension header.
+ In case the next header is an extension header, it should not be specified in
+ IPv6 header item 'proto' field.
+ The last extension header item 'next header' field can specify the following
+ header protocol type.
+
+- Hairpin:
+
+ - Hairpin between two ports could only manual binding and explicit Tx flow mode. For single port hairpin, all the combinations of auto/manual binding and explicit/implicit Tx flow mode could be supported.
+ - Hairpin in switchdev SR-IOV mode is not supported till now.
+
Statistics
----------
Compilation options
~~~~~~~~~~~~~~~~~~~
-These options can be modified in the ``.config`` file.
-
-- ``CONFIG_RTE_LIBRTE_MLX5_PMD`` (default **n**)
+The ibverbs libraries can be linked with this PMD in a number of ways,
+configured by the ``ibverbs_link`` build option:
- Toggle compilation of librte_pmd_mlx5 itself.
+- ``shared`` (default): the PMD depends on some .so files.
-- ``CONFIG_RTE_IBVERBS_LINK_DLOPEN`` (default **n**)
+- ``dlopen``: Split the dependencies glue in a separate library
+ loaded when needed by dlopen.
+ It make dependencies on libibverbs and libmlx4 optional,
+ and has no performance impact.
- Build PMD with additional code to make it loadable without hard
- dependencies on **libibverbs** nor **libmlx5**, which may not be installed
- on the target system.
-
- In this mode, their presence is still required for it to run properly,
- however their absence won't prevent a DPDK application from starting (with
- ``CONFIG_RTE_BUILD_SHARED_LIB`` disabled) and they won't show up as
- missing with ``ldd(1)``.
-
- It works by moving these dependencies to a purpose-built rdma-core "glue"
- plug-in which must either be installed in a directory whose name is based
- on ``CONFIG_RTE_EAL_PMD_PATH`` suffixed with ``-glue`` if set, or in a
- standard location for the dynamic linker (e.g. ``/lib``) if left to the
- default empty string (``""``).
-
- This option has no performance impact.
-
-- ``CONFIG_RTE_IBVERBS_LINK_STATIC`` (default **n**)
-
- Embed static flavor of the dependencies **libibverbs** and **libmlx5**
+- ``static``: Embed static flavor of the dependencies libibverbs and libmlx4
in the PMD shared library or the executable static binary.
-- ``CONFIG_RTE_LIBRTE_MLX5_DEBUG`` (default **n**)
-
- Toggle debugging code and stricter compilation flags. Enabling this option
- adds additional run-time checks and debugging messages at the cost of
- lower performance.
-
-.. note::
-
- For BlueField, target should be set to ``arm64-bluefield-linux-gcc``. This
- will enable ``CONFIG_RTE_LIBRTE_MLX5_PMD`` and set ``RTE_CACHE_LINE_SIZE`` to
- 64. Default armv8a configuration of make build and meson build set it to 128
- then brings performance degradation.
-
-This option is available in meson:
-
-- ``ibverbs_link`` can be ``static``, ``shared``, or ``dlopen``.
-
Environment variables
~~~~~~~~~~~~~~~~~~~~~
A list of directories in which to search for the rdma-core "glue" plug-in,
separated by colons or semi-colons.
- Only matters when compiled with ``CONFIG_RTE_IBVERBS_LINK_DLOPEN``
- enabled and most useful when ``CONFIG_RTE_EAL_PMD_PATH`` is also set,
- since ``LD_LIBRARY_PATH`` has no effect in this case.
-
- ``MLX5_SHUT_UP_BF``
Configures HW Tx doorbell register as IO-mapped.
Run-time configuration
~~~~~~~~~~~~~~~~~~~~~~
-- librte_pmd_mlx5 brings kernel network interfaces up during initialization
+- librte_net_mlx5 brings kernel network interfaces up during initialization
because it is affected by their state. Forcing them down prevents packets
reception.
A nonzero value enables the compression of CQE on RX side. This feature
allows to save PCI bandwidth and improve performance. Enabled by default.
+ Different compression formats are supported in order to achieve the best
+ performance for different traffic patterns. Hash RSS format is the default.
- Supported on:
-
- - x86_64 with ConnectX-4, ConnectX-4 Lx, ConnectX-5, ConnectX-6, ConnectX-6 Dx
- and BlueField.
- - POWER9 and ARMv8 with ConnectX-4 Lx, ConnectX-5, ConnectX-6, ConnectX-6 Dx
- and BlueField.
-
-- ``rxq_cqe_pad_en`` parameter [int]
-
- A nonzero value enables 128B padding of CQE on RX side. The size of CQE
- is aligned with the size of a cacheline of the core. If cacheline size is
- 128B, the CQE size is configured to be 128B even though the device writes
- only 64B data on the cacheline. This is to avoid unnecessary cache
- invalidation by device's two consecutive writes on to one cacheline.
- However in some architecture, it is more beneficial to update entire
- cacheline with padding the rest 64B rather than striding because
- read-modify-write could drop performance a lot. On the other hand,
- writing extra data will consume more PCIe bandwidth and could also drop
- the maximum throughput. It is recommended to empirically set this
- parameter. Disabled by default.
+ Specifying 2 as a ``rxq_cqe_comp_en`` value selects Flow Tag format for
+ better compression rate in case of RTE Flow Mark traffic.
+ Specifying 3 as a ``rxq_cqe_comp_en`` value selects Checksum format.
+ Specifying 4 as a ``rxq_cqe_comp_en`` value selects L3/L4 Header format for
+ better compression rate in case of mixed TCP/UDP and IPv4/IPv6 traffic.
Supported on:
- - CPU having 128B cacheline with ConnectX-5 and BlueField.
+ - x86_64 with ConnectX-4, ConnectX-4 Lx, ConnectX-5, ConnectX-6, ConnectX-6 Dx,
+ ConnectX-6 Lx, BlueField and BlueField-2.
+ - POWER9 and ARMv8 with ConnectX-4 Lx, ConnectX-5, ConnectX-6, ConnectX-6 Dx,
+ ConnectX-6 Lx, BlueField and BlueField-2.
- ``rxq_pkt_pad_en`` parameter [int]
Supported on:
- - x86_64 with ConnectX-4, ConnectX-4 Lx, ConnectX-5, ConnectX-6, ConnectX-6 Dx
- and BlueField.
- - POWER8 and ARMv8 with ConnectX-4 Lx, ConnectX-5, ConnectX-6, ConnectX-6 Dx
- and BlueField.
+ - x86_64 with ConnectX-4, ConnectX-4 Lx, ConnectX-5, ConnectX-6, ConnectX-6 Dx,
+ ConnectX-6 Lx, BlueField and BlueField-2.
+ - POWER8 and ARMv8 with ConnectX-4 Lx, ConnectX-5, ConnectX-6, ConnectX-6 Dx,
+ ConnectX-6 Lx, BlueField and BlueField-2.
- ``mprq_en`` parameter [int]
- ``txq_mpw_en`` parameter [int]
A nonzero value enables Enhanced Multi-Packet Write (eMPW) for ConnectX-5,
- ConnectX-6, ConnectX-6 Dx and BlueField. eMPW allows the TX burst function to pack
- up multiple packets in a single descriptor session in order to save PCI bandwidth
- and improve performance at the cost of a slightly higher CPU usage. When
- ``txq_inline_mpw`` is set along with ``txq_mpw_en``, TX burst function copies
- entire packet data on to TX descriptor instead of including pointer of packet.
+ ConnectX-6, ConnectX-6 Dx, ConnectX-6 Lx, BlueField, BlueField-2.
+ eMPW allows the Tx burst function to pack up multiple packets
+ in a single descriptor session in order to save PCI bandwidth
+ and improve performance at the cost of a slightly higher CPU usage.
+ When ``txq_inline_mpw`` is set along with ``txq_mpw_en``,
+ Tx burst function copies entire packet data on to Tx descriptor
+ instead of including pointer of packet.
The Enhanced Multi-Packet Write feature is enabled by default if NIC supports
it, can be disabled by explicit specifying 0 value for ``txq_mpw_en`` option.
- ``tx_vec_en`` parameter [int]
- A nonzero value enables Tx vector on ConnectX-5, ConnectX-6, ConnectX-6 Dx
- and BlueField NICs if the number of global Tx queues on the port is less than
- ``txqs_max_vec``. The parameter is deprecated and ignored.
+ A nonzero value enables Tx vector on ConnectX-5, ConnectX-6, ConnectX-6 Dx,
+ ConnectX-6 Lx, BlueField and BlueField-2 NICs
+ if the number of global Tx queues on the port is less than ``txqs_max_vec``.
+ The parameter is deprecated and ignored.
- ``rx_vec_en`` parameter [int]
24 bits. The actual supported width can be retrieved in runtime by
series of rte_flow_validate() trials.
+ - 3, this engages tunnel offload mode. In E-Switch configuration, that
+ mode implicitly activates ``dv_xmeta_en=1``.
+
+------+-----------+-----------+-------------+-------------+
| Mode | ``MARK`` | ``META`` | ``META`` Tx | FDB/Through |
+======+===========+===========+=============+=============+
FLEX_PARSER_PROFILE_ENABLE=1
-- enable ICMP/ICMP6 code/type fields matching::
+- enable ICMP(code/type/identifier/sequence number) / ICMP6(code/type) fields matching::
FLEX_PARSER_PROFILE_ENABLE=2
or
FLEX_PARSER_PROFILE_ENABLE=1
+- enable Geneve TLV option flow matching::
+
+ FLEX_PARSER_PROFILE_ENABLE=0
+
- enable GTP flow matching::
FLEX_PARSER_PROFILE_ENABLE=3
FLEX_PARSER_PROFILE_ENABLE=4
PROG_PARSE_GRAPH=1
-Prerequisites
--------------
+Linux Prerequisites
+-------------------
This driver relies on external libraries and kernel drivers for resources
allocations and initialization. The following dependencies are not part of
- **libibverbs**
- User space Verbs framework used by librte_pmd_mlx5. This library provides
+ User space Verbs framework used by librte_net_mlx5. This library provides
a generic interface between the kernel and low-level user space drivers
such as libmlx5.
.. _`Linux installation documentation`: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/plain/Documentation/admin-guide/README.rst
.. _`RDMA Core installation documentation`: https://raw.githubusercontent.com/linux-rdma/rdma-core/master/README.md
-If rdma-core libraries are built but not installed, DPDK makefile can link them,
-thanks to these environment variables:
-
- - ``EXTRA_CFLAGS=-I/path/to/rdma-core/build/include``
- - ``EXTRA_LDFLAGS=-L/path/to/rdma-core/build/lib``
- - ``PKG_CONFIG_PATH=/path/to/rdma-core/build/lib/pkgconfig``
Mellanox OFED/EN
^^^^^^^^^^^^^^^^
Several versions of Mellanox OFED/EN are available. Installing the version
this DPDK release was developed and tested against is strongly
- recommended. Please check the `prerequisites`_.
+ recommended. Please check the `linux prerequisites`_.
+
+Windows Prerequisites
+---------------------
+
+This driver relies on external libraries and kernel drivers for resources
+allocations and initialization. The dependencies in the following sub-sections
+are not part of DPDK, and must be installed separately.
+
+Compilation Prerequisites
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+DevX SDK installation
+^^^^^^^^^^^^^^^^^^^^^
+
+The DevX SDK must be installed on the machine building the Windows PMD.
+Additional information can be found at
+`How to Integrate Windows DevX in Your Development Environment
+<https://docs.mellanox.com/display/winof2v250/RShim+Drivers+and+Usage#RShimDriversandUsage-DevXInterface>`__.
+
+Runtime Prerequisites
+~~~~~~~~~~~~~~~~~~~~~
+
+WinOF2 version 2.60 or higher must be installed on the machine.
+
+WinOF2 installation
+^^^^^^^^^^^^^^^^^^^
+
+The driver can be downloaded from the following site:
+`WINOF2
+<https://www.mellanox.com/products/adapter-software/ethernet/windows/winof-2>`__
+
+DevX Enablement
+^^^^^^^^^^^^^^^
+
+DevX for Windows must be enabled in the Windows registry.
+The keys ``DevxEnabled`` and ``DevxFsRules`` must be set.
+Additional information can be found in the WinOF2 user manual.
Supported NICs
--------------
- ConnectX-5 Ex
- ConnectX-6
- ConnectX-6 Dx
+ - ConnectX-6 Lx
- BlueField
+ - BlueField-2
Below are detailed device names:
* Mellanox\ |reg| ConnectX\ |reg|-6 200G MCX654106A-HCAT (2x200G)
* Mellanox\ |reg| ConnectX\ |reg|-6 Dx EN 100G MCX623106AN-CDAT (2x100G)
* Mellanox\ |reg| ConnectX\ |reg|-6 Dx EN 200G MCX623105AN-VDAT (1x200G)
+* Mellanox\ |reg| ConnectX\ |reg|-6 Lx EN 25G MCX631102AN-ADAT (2x25G)
Quick Start Guide on OFED/EN
----------------------------
-1. Download latest Mellanox OFED/EN. For more info check the `prerequisites`_.
+1. Download latest Mellanox OFED/EN. For more info check the `linux prerequisites`_.
2. Install the required libraries and kernel modules either by installing
echo [num_vfs] > /sys/class/infiniband/mlx5_0/device/sriov_numvfs
-6. Compile DPDK and you are ready to go. See instructions on
- :ref:`Development Kit Build System <Development_Kit_Build_System>`
+6. Install DPDK and you are ready to go.
+ See :doc:`compilation instructions <../linux_gsg/build_dpdk>`.
Enable switchdev mode
---------------------
- Configure per-lcore cache when creating Mempools for packet buffer.
- Refrain from dynamically allocating/freeing memory in run-time.
+Rx burst functions
+------------------
+
+There are multiple Rx burst functions with different advantages and limitations.
+
+.. table:: Rx burst functions
+
+ +-------------------+------------------------+---------+-----------------+------+-------+
+ || Function Name || Enabler || Scatter|| Error Recovery || CQE || Large|
+ | | | | || comp|| MTU |
+ +===================+========================+=========+=================+======+=======+
+ | rx_burst | rx_vec_en=0 | Yes | Yes | Yes | Yes |
+ +-------------------+------------------------+---------+-----------------+------+-------+
+ | rx_burst_vec | rx_vec_en=1 (default) | No | if CQE comp off | Yes | No |
+ +-------------------+------------------------+---------+-----------------+------+-------+
+ | rx_burst_mprq || mprq_en=1 | No | Yes | Yes | Yes |
+ | || RxQs >= rxqs_min_mprq | | | | |
+ +-------------------+------------------------+---------+-----------------+------+-------+
+ | rx_burst_mprq_vec || rx_vec_en=1 (default) | No | if CQE comp off | Yes | Yes |
+ | || mprq_en=1 | | | | |
+ | || RxQs >= rxqs_min_mprq | | | | |
+ +-------------------+------------------------+---------+-----------------+------+-------+
+
.. _mlx5_offloads_support:
Supported hardware offloads
.. table:: Minimal SW/HW versions for queue offloads
- ============== ===== ===== ========= ===== ========== ==========
+ ============== ===== ===== ========= ===== ========== =============
Offload DPDK Linux rdma-core OFED firmware hardware
- ============== ===== ===== ========= ===== ========== ==========
+ ============== ===== ===== ========= ===== ========== =============
common base 17.11 4.14 16 4.2-1 12.21.1000 ConnectX-4
checksums 17.11 4.14 16 4.2-1 12.21.1000 ConnectX-4
Rx timestamp 17.11 4.14 16 4.2-1 12.21.1000 ConnectX-4
TSO 17.11 4.14 16 4.2-1 12.21.1000 ConnectX-4
LRO 19.08 N/A N/A 4.6-4 16.25.6406 ConnectX-5
- ============== ===== ===== ========= ===== ========== ==========
+ Buffer Split 20.11 N/A N/A 5.1-2 22.28.2006 ConnectX-6 Dx
+ ============== ===== ===== ========= ===== ========== =============
.. table:: Minimal SW/HW versions for rte_flow offloads
| | | | | rdma-core 23 |
| | | | | ConnectX-4 |
+-----------------------+-----------------+-----------------+
+ | RSS shared action | | | | DPDK 20.11 |
+ | | | N/A | | OFED 5.2 |
+ | | | | | rdma-core 33 |
+ | | | | | ConnectX-5 |
+ +-----------------------+-----------------+-----------------+
+ | | VLAN | | DPDK 19.11 | | DPDK 19.11 |
+ | | (of_pop_vlan / | | OFED 4.7-1 | | OFED 4.7-1 |
+ | | of_push_vlan / | | ConnectX-5 | | ConnectX-5 |
+ | | of_set_vlan_pcp / | | | | |
+ | | of_set_vlan_vid) | | | | |
+ +-----------------------+-----------------+-----------------+
| Encapsulation | | DPDK 19.05 | | DPDK 19.02 |
| (VXLAN / NVGRE / RAW) | | OFED 4.7-1 | | OFED 4.6 |
| | | rdma-core 24 | | rdma-core 23 |
| | | rdma-core 27 | | rdma-core 27 |
| | | ConnectX-5 | | ConnectX-5 |
+-----------------------+-----------------+-----------------+
+ | Tunnel Offload | | DPDK 20.11 | | DPDK 20.11 |
+ | | | OFED 5.1-2 | | OFED 5.1-2 |
+ | | | rdma-core 32 | | N/A |
+ | | | ConnectX-5 | | ConnectX-5 |
+ +-----------------------+-----------------+-----------------+
| | Header rewrite | | DPDK 19.05 | | DPDK 19.02 |
| | (set_ipv4_src / | | OFED 4.7-1 | | OFED 4.7-1 |
| | set_ipv4_dst / | | rdma-core 24 | | rdma-core 24 |
| | | rdma-core 24 | | rdma-core 23 |
| | | ConnectX-5 | | ConnectX-4 |
+-----------------------+-----------------+-----------------+
+ | Meta data | | DPDK 19.11 | | DPDK 19.11 |
+ | | | OFED 4.7-3 | | OFED 4.7-3 |
+ | | | rdma-core 26 | | rdma-core 26 |
+ | | | ConnectX-5 | | ConnectX-5 |
+ +-----------------------+-----------------+-----------------+
| Port ID | | DPDK 19.05 | | N/A |
| | | OFED 4.7-1 | | N/A |
| | | rdma-core 24 | | N/A |
| | | ConnectX-5 | | N/A |
+-----------------------+-----------------+-----------------+
- | | VLAN | | DPDK 19.11 | | DPDK 19.11 |
- | | (of_pop_vlan / | | OFED 4.7-1 | | OFED 4.7-1 |
- | | of_push_vlan / | | ConnectX-5 | | ConnectX-5 |
- | | of_set_vlan_pcp / | | | | |
- | | of_set_vlan_vid) | | | | |
- +-----------------------+-----------------+-----------------+
| Hairpin | | | | DPDK 19.11 |
| | | N/A | | OFED 4.7-3 |
| | | | | rdma-core 26 |
| | | | | ConnectX-5 |
+-----------------------+-----------------+-----------------+
- | Meta data | | DPDK 19.11 | | DPDK 19.11 |
- | | | OFED 4.7-3 | | OFED 4.7-3 |
- | | | rdma-core 26 | | rdma-core 26 |
- | | | ConnectX-5 | | ConnectX-5 |
+ | 2-port Hairpin | | | | DPDK 20.11 |
+ | | | N/A | | OFED 5.1-2 |
+ | | | | | N/A |
+ | | | | | ConnectX-5 |
+-----------------------+-----------------+-----------------+
| Metering | | DPDK 19.11 | | DPDK 19.11 |
| | | OFED 4.7-3 | | OFED 4.7-3 |
| | | rdma-core 26 | | rdma-core 26 |
| | | ConnectX-5 | | ConnectX-5 |
+-----------------------+-----------------+-----------------+
+ | Sampling | | DPDK 20.11 | | DPDK 20.11 |
+ | | | OFED 5.1-2 | | OFED 5.1-2 |
+ | | | rdma-core 32 | | N/A |
+ | | | ConnectX-5 | | ConnectX-5 |
+ +-----------------------+-----------------+-----------------+
+ | Age shared action | | DPDK 20.11 | | DPDK 20.11 |
+ | | | OFED 5.2 | | OFED 5.2 |
+ | | | rdma-core 32 | | rdma-core 32 |
+ | | | ConnectX-6 Dx| | ConnectX-6 Dx |
+ +-----------------------+-----------------+-----------------+
+ | Encapsulation | | DPDK 21.02 | | DPDK 21.02 |
+ | GTP PSC | | OFED 5.2 | | OFED 5.2 |
+ | | | rdma-core 35 | | rdma-core 35 |
+ | | | ConnectX-6 Dx| | ConnectX-6 Dx |
+ +-----------------------+-----------------+-----------------+
+ | Encapsulation | | DPDK 21.02 | | DPDK 21.02 |
+ | GENEVE TLV option | | OFED 5.2 | | OFED 5.2 |
+ | | | rdma-core 34 | | rdma-core 34 |
+ | | | ConnectX-6 Dx | | ConnectX-6 Dx |
+ +-----------------------+-----------------+-----------------+
Notes for metadata
------------------
Notes for testpmd
-----------------
-Compared to librte_pmd_mlx4 that implements a single RSS configuration per
-port, librte_pmd_mlx5 supports per-protocol RSS configuration.
+Compared to librte_net_mlx4 that implements a single RSS configuration per
+port, librte_net_mlx5 supports per-protocol RSS configuration.
Since ``testpmd`` defaults to IP RSS mode and there is currently no
command-line parameter to enable additional protocols (UDP and TCP as well
as IP), the following commands must be entered from its CLI to get the same
-behavior as librte_pmd_mlx4::
+behavior as librte_net_mlx4::
> port stop all
> port config all rss all
-------------
This section demonstrates how to launch **testpmd** with Mellanox
-ConnectX-4/ConnectX-5/ConnectX-6/BlueField devices managed by librte_pmd_mlx5.
+ConnectX-4/ConnectX-5/ConnectX-6/BlueField devices managed by librte_net_mlx5.
#. Load the kernel modules::
eth32
eth33
-#. Optionally, retrieve their PCI bus addresses for whitelisting::
+#. Optionally, retrieve their PCI bus addresses for to be used with the allow list::
{
for intf in eth2 eth3 eth4 eth5;
(cd "/sys/class/net/${intf}/device/" && pwd -P);
done;
} |
- sed -n 's,.*/\(.*\),-w \1,p'
+ sed -n 's,.*/\(.*\),-a \1,p'
Example output::
- -w 0000:05:00.1
- -w 0000:06:00.0
- -w 0000:06:00.1
- -w 0000:05:00.0
+ -a 0000:05:00.1
+ -a 0000:06:00.0
+ -a 0000:06:00.1
+ -a 0000:05:00.0
#. Request huge pages::
#. Start testpmd with basic parameters::
- testpmd -l 8-15 -n 4 -w 05:00.0 -w 05:00.1 -w 06:00.0 -w 06:00.1 -- --rxq=2 --txq=2 -i
+ testpmd -l 8-15 -n 4 -a 05:00.0 -a 05:00.1 -a 06:00.0 -a 06:00.1 -- --rxq=2 --txq=2 -i
Example output::
[...]
EAL: PCI device 0000:05:00.0 on NUMA socket 0
- EAL: probe driver: 15b3:1013 librte_pmd_mlx5
- PMD: librte_pmd_mlx5: PCI information matches, using device "mlx5_0" (VF: false)
- PMD: librte_pmd_mlx5: 1 port(s) detected
- PMD: librte_pmd_mlx5: port 1 MAC address is e4:1d:2d:e7:0c:fe
+ EAL: probe driver: 15b3:1013 librte_net_mlx5
+ PMD: librte_net_mlx5: PCI information matches, using device "mlx5_0" (VF: false)
+ PMD: librte_net_mlx5: 1 port(s) detected
+ PMD: librte_net_mlx5: port 1 MAC address is e4:1d:2d:e7:0c:fe
EAL: PCI device 0000:05:00.1 on NUMA socket 0
- EAL: probe driver: 15b3:1013 librte_pmd_mlx5
- PMD: librte_pmd_mlx5: PCI information matches, using device "mlx5_1" (VF: false)
- PMD: librte_pmd_mlx5: 1 port(s) detected
- PMD: librte_pmd_mlx5: port 1 MAC address is e4:1d:2d:e7:0c:ff
+ EAL: probe driver: 15b3:1013 librte_net_mlx5
+ PMD: librte_net_mlx5: PCI information matches, using device "mlx5_1" (VF: false)
+ PMD: librte_net_mlx5: 1 port(s) detected
+ PMD: librte_net_mlx5: port 1 MAC address is e4:1d:2d:e7:0c:ff
EAL: PCI device 0000:06:00.0 on NUMA socket 0
- EAL: probe driver: 15b3:1013 librte_pmd_mlx5
- PMD: librte_pmd_mlx5: PCI information matches, using device "mlx5_2" (VF: false)
- PMD: librte_pmd_mlx5: 1 port(s) detected
- PMD: librte_pmd_mlx5: port 1 MAC address is e4:1d:2d:e7:0c:fa
+ EAL: probe driver: 15b3:1013 librte_net_mlx5
+ PMD: librte_net_mlx5: PCI information matches, using device "mlx5_2" (VF: false)
+ PMD: librte_net_mlx5: 1 port(s) detected
+ PMD: librte_net_mlx5: port 1 MAC address is e4:1d:2d:e7:0c:fa
EAL: PCI device 0000:06:00.1 on NUMA socket 0
- EAL: probe driver: 15b3:1013 librte_pmd_mlx5
- PMD: librte_pmd_mlx5: PCI information matches, using device "mlx5_3" (VF: false)
- PMD: librte_pmd_mlx5: 1 port(s) detected
- PMD: librte_pmd_mlx5: port 1 MAC address is e4:1d:2d:e7:0c:fb
+ EAL: probe driver: 15b3:1013 librte_net_mlx5
+ PMD: librte_net_mlx5: PCI information matches, using device "mlx5_3" (VF: false)
+ PMD: librte_net_mlx5: 1 port(s) detected
+ PMD: librte_net_mlx5: port 1 MAC address is e4:1d:2d:e7:0c:fb
Interactive-mode selected
Configuring Port 0 (socket 0)
- PMD: librte_pmd_mlx5: 0x8cba80: TX queues number update: 0 -> 2
- PMD: librte_pmd_mlx5: 0x8cba80: RX queues number update: 0 -> 2
+ PMD: librte_net_mlx5: 0x8cba80: TX queues number update: 0 -> 2
+ PMD: librte_net_mlx5: 0x8cba80: RX queues number update: 0 -> 2
Port 0: E4:1D:2D:E7:0C:FE
Configuring Port 1 (socket 0)
- PMD: librte_pmd_mlx5: 0x8ccac8: TX queues number update: 0 -> 2
- PMD: librte_pmd_mlx5: 0x8ccac8: RX queues number update: 0 -> 2
+ PMD: librte_net_mlx5: 0x8ccac8: TX queues number update: 0 -> 2
+ PMD: librte_net_mlx5: 0x8ccac8: RX queues number update: 0 -> 2
Port 1: E4:1D:2D:E7:0C:FF
Configuring Port 2 (socket 0)
- PMD: librte_pmd_mlx5: 0x8cdb10: TX queues number update: 0 -> 2
- PMD: librte_pmd_mlx5: 0x8cdb10: RX queues number update: 0 -> 2
+ PMD: librte_net_mlx5: 0x8cdb10: TX queues number update: 0 -> 2
+ PMD: librte_net_mlx5: 0x8cdb10: RX queues number update: 0 -> 2
Port 2: E4:1D:2D:E7:0C:FA
Configuring Port 3 (socket 0)
- PMD: librte_pmd_mlx5: 0x8ceb58: TX queues number update: 0 -> 2
- PMD: librte_pmd_mlx5: 0x8ceb58: RX queues number update: 0 -> 2
+ PMD: librte_net_mlx5: 0x8ceb58: TX queues number update: 0 -> 2
+ PMD: librte_net_mlx5: 0x8ceb58: RX queues number update: 0 -> 2
Port 3: E4:1D:2D:E7:0C:FB
Checking link statuses...
Port 0 Link Up - speed 40000 Mbps - full-duplex
git.droids-corp.org / dpdk.git / blobdiff