- Sample flow:
- - Supports ``RTE_FLOW_ACTION_TYPE_SAMPLE`` action only within NIC Rx and E-Switch steering domain.
- - The E-Switch Sample flow must have the eswitch_manager VPORT destination (PF or ECPF) and no additional actions.
- - For ConnectX-5, the ``RTE_FLOW_ACTION_TYPE_SAMPLE`` is typically used as first action in the E-Switch egress flow if with header modify or encapsulation actions.
+ - Supports ``RTE_FLOW_ACTION_TYPE_SAMPLE`` action only within NIC Rx and
+ E-Switch steering domain.
+ - For E-Switch Sampling flow with sample ratio > 1, additional actions are not
+ supported in the sample actions list.
+ - For ConnectX-5, the ``RTE_FLOW_ACTION_TYPE_SAMPLE`` is typically used as
+ first action in the E-Switch egress flow if with header modify or
+ encapsulation actions.
+ - For NIC Rx flow, supports ``MARK``, ``COUNT``, ``QUEUE``, ``RSS`` in the
+ sample actions list.
+ - For E-Switch mirroring flow, supports ``RAW ENCAP``, ``Port ID`` in the
+ sample actions list.
- Modify Field flow:
of the extensive metadata features. The legacy Verbs supports FLAG and
MARK metadata actions over NIC Rx steering domain only.
- The setting MARK or META value to zero means there is no item provided and
- receiving datapath will not report in mbufs these items are present.
+ Setting META value to zero in flow action means there is no item provided
+ and receiving datapath will not report in mbufs the metadata are present.
+ Setting MARK value to zero in flow action means the zero FDIR ID value
+ will be reported on packet receiving.
For the MARK action the last 16 values in the full range are reserved for
internal PMD purposes (to emulate FLAG action). The valid range for the
- ``representor`` parameter [list]
This parameter can be used to instantiate DPDK Ethernet devices from
- existing port (or VF) representors configured on the device.
+ existing port (PF, VF or SF) representors configured on the device.
It is a standard parameter whose format is described in
:ref:`ethernet_device_standard_device_arguments`.
- For instance, to probe port representors 0 through 2::
+ For instance, to probe VF port representors 0 through 2::
- representor=[0-2]
+ representor=vf[0-2]
+
+ To probe SF port representors 0 through 2::
+
+ representor=sf[0-2]
- ``max_dump_files_num`` parameter [int]
Enable switchdev mode
---------------------
-Switchdev mode is a mode in E-Switch, that binds between representor and VF.
-Representor is a port in DPDK that is connected to a VF in such a way
-that assuming there are no offload flows, each packet that is sent from the VF
-will be received by the corresponding representor. While each packet that is
-sent to a representor will be received by the VF.
+Switchdev mode is a mode in E-Switch, that binds between representor and VF or SF.
+Representor is a port in DPDK that is connected to a VF or SF in such a way
+that assuming there are no offload flows, each packet that is sent from the VF or SF
+will be received by the corresponding representor. While each packet that is or SF
+sent to a representor will be received by the VF or SF.
This is very useful in case of SRIOV mode, where the first packet that is sent
-by the VF will be received by the DPDK application which will decide if this
+by the VF or SF will be received by the DPDK application which will decide if this
flow should be offloaded to the E-Switch. After offloading the flow packet
-that the VF that are matching the flow will not be received any more by
+that the VF or SF that are matching the flow will not be received any more by
the DPDK application.
1. Enable SRIOV mode::
echo switchdev > /sys/class/net/<net device>/compat/devlink/mode
+SubFunction representor support
+-------------------------------
+SubFunction is a portion of the PCI device, a SF netdev has its own
+dedicated queues(txq, rxq). A SF netdev supports E-Switch representation
+offload similar to existing PF and VF representors. A SF shares PCI
+level resources with other SFs and/or with its parent PCI function.
+
+1. Configure SF feature::
+
+ mlxconfig -d <mst device> set PF_BAR2_SIZE=<0/1/2/3> PF_BAR2_ENABLE=1
+
+ Value of PF_BAR2_SIZE:
+
+ 0: 8 SFs
+ 1: 16 SFs
+ 2: 32 SFs
+ 3: 64 SFs
+
+2. Reset the FW::
+
+ mlxfwreset -d <mst device> reset
+
+3. Enable switchdev mode::
+
+ echo switchdev > /sys/class/net/<net device>/compat/devlink/mode
+
+4. Create SF::
+
+ mlnx-sf -d <PCI_BDF> -a create
+
+5. Probe SF representor::
+
+ testpmd> port attach <PCI_BDF>,representor=sf0,dv_flow_en=1
+
Performance tuning
------------------
#. Request huge pages::
- echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages/nr_hugepages
+ dpdk-hugepages.py --setup 2G
#. Start testpmd with basic parameters::
- testpmd -l 8-15 -n 4 -a 05:00.0 -a 05:00.1 -a 06:00.0 -a 06:00.1 -- --rxq=2 --txq=2 -i
+ dpdk-testpmd -l 8-15 -n 4 -a 05:00.0 -a 05:00.1 -a 06:00.0 -a 06:00.1 -- --rxq=2 --txq=2 -i
Example output::
git.droids-corp.org / dpdk.git / blobdiff