- Hardware LRO.
- Hairpin.
- Multiple-thread flow insertion.
+- Matching on IPv4 Internet Header Length (IHL).
- Matching on GTP extension header with raw encap/decap action.
- Matching on Geneve TLV option header with raw encap/decap action.
- RSS support in sample action.
- Flow integrity offload API.
- Connection tracking.
- Sub-Function representors.
+- Sub-Function.
+
Limitations
-----------
Last reserved 8-bits matching is only supported When using DV flow
engine (``dv_flow_en`` = 1).
+ For ConnectX-5, the UDP destination port must be the standard one (4789).
Group zero's behavior may differ which depends on FW.
Matching value equals 0 (value & mask) is not supported.
- CRC:
- - ``DEV_RX_OFFLOAD_KEEP_CRC`` cannot be supported with decapsulation
+ - ``RTE_ETH_RX_OFFLOAD_KEEP_CRC`` cannot be supported with decapsulation
for some NICs (such as ConnectX-6 Dx, ConnectX-6 Lx, and BlueField-2).
The capability bit ``scatter_fcs_w_decap_disable`` shows NIC support.
- Meter:
- All the meter colors with drop action will be counted only by the global drop statistics.
- - Green color is not supported with drop action.
- - Yellow detection is not supported.
+ - Yellow detection is only supported with ASO metering.
- Red color must be with drop action.
- Meter statistics are supported only for drop case.
- - Meter yellow color detection is not supported.
- A meter action created with pre-defined policy must be the last action in the flow except single case where the policy actions are:
- green: NULL or END.
- yellow: NULL or END.
- RED: DROP / END.
- The only supported meter policy actions:
- - green: QUEUE, RSS, PORT_ID, JUMP, MARK and SET_TAG.
- - yellow: must be empty.
+ - green: QUEUE, RSS, PORT_ID, REPRESENTED_PORT, JUMP, DROP, MARK and SET_TAG.
+ - yellow: QUEUE, RSS, PORT_ID, REPRESENTED_PORT, JUMP, DROP, MARK and SET_TAG.
- RED: must be DROP.
+ - Policy actions of RSS for green and yellow should have the same configuration except queues.
- meter profile packet mode is supported.
+ - meter profiles of RFC2697, RFC2698 and RFC4115 are supported.
- Integrity:
- 256 ports maximum.
- 4M connections maximum.
+- Multi-thread flow insertion:
+
+ - In order to achieve best insertion rate, application should manage the flows per lcore.
+ - Better to disable memory reclaim by setting ``reclaim_mem_mode`` to 0 to accelerate the flow object allocation and release with cache.
+
+- HW hashed bonding
+
+ - TXQ affinity subjects to HW hash once enabled.
+
Statistics
----------
and each stride receives one packet. MPRQ can improve throughput for
small-packet traffic.
- When MPRQ is enabled, max_rx_pkt_len can be larger than the size of
- user-provided mbuf even if DEV_RX_OFFLOAD_SCATTER isn't enabled. PMD will
- configure large stride size enough to accommodate max_rx_pkt_len as long as
+ When MPRQ is enabled, MTU can be larger than the size of
+ user-provided mbuf even if RTE_ETH_RX_OFFLOAD_SCATTER isn't enabled. PMD will
+ configure large stride size enough to accommodate MTU as long as
device allows. Note that this can waste system memory compared to enabling Rx
scatter and multi-segment packet.
Enabled by default.
+- ``mr_mempool_reg_en`` parameter [int]
+
+ A nonzero value enables implicit registration of DMA memory of all mempools
+ except those having ``RTE_MEMPOOL_F_NON_IO``. This flag is set automatically
+ for mempools populated with non-contiguous objects or those without IOVA.
+ The effect is that when a packet from a mempool is transmitted,
+ its memory is already registered for DMA in the PMD and no registration
+ will happen on the data path. The tradeoff is extra work on the creation
+ of each mempool and increased HW resource use if some mempools
+ are not used with MLX5 devices.
+
+ Enabled by default.
+
- ``representor`` parameter [list]
This parameter can be used to instantiate DPDK Ethernet devices from
echo -n "<device pci address" > /sys/bus/pci/drivers/mlx5_core/unbind
-5. Enbale switchdev mode::
+5. Enable switchdev mode::
echo switchdev > /sys/class/net/<net device>/compat/devlink/mode
-Sub-Function representor
-------------------------
+Sub-Function support
+--------------------
Sub-Function is a portion of the PCI device, a SF netdev has its own
-dedicated queues(txq, rxq). A SF netdev supports E-Switch representation
-offload similar to existing PF and VF representors. A SF shares PCI
-level resources with other SFs and/or with its parent PCI function.
+dedicated queues (txq, rxq).
+A SF shares PCI level resources with other SFs and/or with its parent PCI function.
+
+0. Requirement::
+
+ OFED version >= 5.4-0.3.3.0
1. Configure SF feature::
- mlxconfig -d <mst device> set PF_BAR2_SIZE=<0/1/2/3> PF_BAR2_ENABLE=1
+ # Run mlxconfig on both PFs on host and ECPFs on BlueField.
+ mlxconfig -d <mst device> set PER_PF_NUM_SF=1 PF_TOTAL_SF=252 PF_SF_BAR_SIZE=12
- Value of PF_BAR2_SIZE:
+2. Enable switchdev mode::
- 0: 8 SFs
- 1: 16 SFs
- 2: 32 SFs
- 3: 64 SFs
+ mlxdevm dev eswitch set pci/<DBDF> mode switchdev
-2. Reset the FW::
+3. Add SF port::
- mlxfwreset -d <mst device> reset
+ mlxdevm port add pci/<DBDF> flavour pcisf pfnum 0 sfnum <sfnum>
-3. Enable switchdev mode::
+ Get SFID from output: pci/<DBDF>/<SFID>
- echo switchdev > /sys/class/net/<net device>/compat/devlink/mode
+4. Modify MAC address::
+
+ mlxdevm port function set pci/<DBDF>/<SFID> hw_addr <MAC>
+
+5. Activate SF port::
+
+ mlxdevm port function set pci/<DBDF>/<ID> state active
-4. Create SF::
+6. Devargs to probe SF device::
- mlnx-sf -d <PCI_BDF> -a create
+ auxiliary:mlx5_core.sf.<num>,dv_flow_en=1
-5. Probe SF representor::
+Sub-Function representor support
+--------------------------------
- testpmd> port attach <PCI_BDF>,representor=sf0,dv_flow_en=1
+A SF netdev supports E-Switch representation offload
+similar to PF and VF representors.
+Use <sfnum> to probe SF representor::
+
+ testpmd> port attach <PCI_BDF>,representor=sf<sfnum>,dv_flow_en=1
Performance tuning
------------------
| | | rdma-core 26 | | rdma-core 26 |
| | | ConnectX-5 | | ConnectX-5 |
+-----------------------+-----------------+-----------------+
+ | ASO Metering | | DPDK 21.05 | | DPDK 21.05 |
+ | | | OFED 5.3 | | OFED 5.3 |
+ | | | rdma-core 33 | | rdma-core 33 |
+ | | | ConnectX-6 Dx| | ConnectX-6 Dx |
+ +-----------------------+-----------------+-----------------+
+ | Metering Hierarchy | | DPDK 21.08 | | DPDK 21.08 |
+ | | | OFED 5.3 | | OFED 5.3 |
+ | | | N/A | | N/A |
+ | | | ConnectX-6 Dx| | ConnectX-6 Dx |
+ +-----------------------+-----------------+-----------------+
| Sampling | | DPDK 20.11 | | DPDK 20.11 |
| | | OFED 5.1-2 | | OFED 5.1-2 |
| | | rdma-core 32 | | N/A |
git.droids-corp.org / dpdk.git / blobdiff