- Hardware LRO.
- Hairpin.
- Multiple-thread flow insertion.
+- Matching on IPv4 Internet Header Length (IHL).
- Matching on GTP extension header with raw encap/decap action.
- Matching on Geneve TLV option header with raw encap/decap action.
- RSS support in sample action.
- 21844 flow priorities for ingress or egress flow groups greater than 0 and for any transfer
flow group.
- Flow metering, including meter policy API.
+- Flow meter hierarchy.
- Flow integrity offload API.
- Connection tracking.
- Sub-Function representors.
+- Sub-Function.
+
Limitations
-----------
size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
inline settings) to 58.
-- Flows with a VXLAN Network Identifier equal (or ends to be equal)
- to 0 are not supported.
+- Match on VXLAN supports the following fields only:
+
+ - VNI
+ - Last reserved 8-bits
+
+ Last reserved 8-bits matching is only supported When using DV flow
+ engine (``dv_flow_en`` = 1).
+ Group zero's behavior may differ which depends on FW.
+ Matching value equals 0 (value & mask) is not supported.
- L3 VXLAN and VXLAN-GPE tunnels cannot be supported together with MPLSoGRE and MPLSoUDP.
no MPRQ feature or vectorized code can be engaged.
- When Multi-Packet Rx queue is configured (``mprq_en``), a Rx packet can be
- externally attached to a user-provided mbuf with having EXT_ATTACHED_MBUF in
+ externally attached to a user-provided mbuf with having RTE_MBUF_F_EXTERNAL in
ol_flags. As the mempool for the external buffer is managed by PMD, all the
Rx mbufs must be freed before the device is closed. Otherwise, the mempool of
the external buffers will be freed by PMD and the application which still
- If Multi-Packet Rx queue is configured (``mprq_en``) and Rx CQE compression is
enabled (``rxq_cqe_comp_en``) at the same time, RSS hash result is not fully
- supported. Some Rx packets may not have PKT_RX_RSS_HASH.
+ supported. Some Rx packets may not have RTE_MBUF_F_RX_RSS_HASH.
- IPv6 Multicast messages are not supported on VM, while promiscuous mode
and allmulticast mode are both set to off.
- Meter:
- All the meter colors with drop action will be counted only by the global drop statistics.
- - Green color is not supported with drop action.
- - Yellow detection is not supported.
+ - Yellow detection is only supported with ASO metering.
- Red color must be with drop action.
- Meter statistics are supported only for drop case.
- - Meter yellow color detection is not supported.
- A meter action created with pre-defined policy must be the last action in the flow except single case where the policy actions are:
- green: NULL or END.
- yellow: NULL or END.
- RED: DROP / END.
- The only supported meter policy actions:
- - green: QUEUE, RSS, PORT_ID, JUMP, MARK and SET_TAG.
- - yellow: must be empty.
+ - green: QUEUE, RSS, PORT_ID, JUMP, DROP, MARK and SET_TAG.
+ - yellow: QUEUE, RSS, PORT_ID, JUMP, DROP, MARK and SET_TAG.
- RED: must be DROP.
+ - Policy actions of RSS for green and yellow should have the same configuration except queues.
- meter profile packet mode is supported.
+ - meter profiles of RFC2697, RFC2698 and RFC4115 are supported.
- Integrity:
- 256 ports maximum.
- 4M connections maximum.
+- Multi-thread flow insertion:
+
+ - In order to achieve best insertion rate, application should manage the flows per lcore.
+ - Better to disable memory reclaim by setting ``reclaim_mem_mode`` to 0 to accelerate the flow object allocation and release with cache.
+
Statistics
----------
the mbuf by external buffer attachment - ``rte_pktmbuf_attach_extbuf()``.
A mempool for external buffers will be allocated and managed by PMD. If Rx
packet is externally attached, ol_flags field of the mbuf will have
- EXT_ATTACHED_MBUF and this flag must be preserved. ``RTE_MBUF_HAS_EXTBUF()``
+ RTE_MBUF_F_EXTERNAL and this flag must be preserved. ``RTE_MBUF_HAS_EXTBUF()``
checks the flag. The default value is 128, valid only if ``mprq_en`` is set.
- ``rxqs_min_mprq`` parameter [int]
By default, the PMD will set this value to 1.
+- ``allow_duplicate_pattern`` parameter [int]
+
+ There are two options to choose:
+
+ - 0. Prevent insertion of rules with the same pattern items on non-root table.
+ In this case, only the first rule is inserted and the following rules are
+ rejected and error code EEXIST is returned.
+
+ - 1. Allow insertion of rules with the same pattern items.
+ In this case, all rules are inserted but only the first rule takes effect,
+ the next rule takes effect only if the previous rules are deleted.
+
+ By default, the PMD will set this value to 1.
+
.. _mlx5_firmware_config:
Firmware configuration
echo switchdev > /sys/class/net/<net device>/compat/devlink/mode
-Sub-Function representor
-------------------------
+Sub-Function support
+--------------------
Sub-Function is a portion of the PCI device, a SF netdev has its own
-dedicated queues(txq, rxq). A SF netdev supports E-Switch representation
-offload similar to existing PF and VF representors. A SF shares PCI
-level resources with other SFs and/or with its parent PCI function.
+dedicated queues (txq, rxq).
+A SF shares PCI level resources with other SFs and/or with its parent PCI function.
+
+0. Requirement::
+
+ OFED version >= 5.4-0.3.3.0
1. Configure SF feature::
- mlxconfig -d <mst device> set PF_BAR2_SIZE=<0/1/2/3> PF_BAR2_ENABLE=1
+ # Run mlxconfig on both PFs on host and ECPFs on BlueField.
+ mlxconfig -d <mst device> set PER_PF_NUM_SF=1 PF_TOTAL_SF=252 PF_SF_BAR_SIZE=12
- Value of PF_BAR2_SIZE:
+2. Enable switchdev mode::
- 0: 8 SFs
- 1: 16 SFs
- 2: 32 SFs
- 3: 64 SFs
+ mlxdevm dev eswitch set pci/<DBDF> mode switchdev
-2. Reset the FW::
+3. Add SF port::
- mlxfwreset -d <mst device> reset
+ mlxdevm port add pci/<DBDF> flavour pcisf pfnum 0 sfnum <sfnum>
-3. Enable switchdev mode::
+ Get SFID from output: pci/<DBDF>/<SFID>
- echo switchdev > /sys/class/net/<net device>/compat/devlink/mode
+4. Modify MAC address::
+
+ mlxdevm port function set pci/<DBDF>/<SFID> hw_addr <MAC>
+
+5. Activate SF port::
+
+ mlxdevm port function set pci/<DBDF>/<ID> state active
-4. Create SF::
+6. Devargs to probe SF device::
- mlnx-sf -d <PCI_BDF> -a create
+ auxiliary:mlx5_core.sf.<num>,dv_flow_en=1
-5. Probe SF representor::
+Sub-Function representor support
+--------------------------------
- testpmd> port attach <PCI_BDF>,representor=sf0,dv_flow_en=1
+A SF netdev supports E-Switch representation offload
+similar to PF and VF representors.
+Use <sfnum> to probe SF representor::
+
+ testpmd> port attach <PCI_BDF>,representor=sf<sfnum>,dv_flow_en=1
Performance tuning
------------------
.. code-block:: console
flow create X ingress transfer pattern eth / port_id id is Y / end actions meter mtr_id M / end
+
+How to use meter hierarchy
+--------------------------
+
+This section demonstrates how to create and use a meter hierarchy.
+A termination meter M can be the policy green action of another termination meter N.
+The two meters are chained together as a chain. Using meter N in a flow will apply
+both the meters in hierarchy on that flow.
+
+.. code-block:: console
+
+ add port meter policy 0 1 g_actions queue index 0 / end y_actions end r_actions drop / end
+ create port meter 0 M 1 1 yes 0xffff 1 0
+ add port meter policy 0 2 g_actions meter mtr_id M / end y_actions end r_actions drop / end
+ create port meter 0 N 2 2 yes 0xffff 1 0
+ flow create 0 ingress group 1 pattern eth / end actions meter mtr_id N / end
git.droids-corp.org / dpdk.git / blobdiff