net/sfc: implement EF10 native Rx datapath

[dpdk.git] / doc / guides / nics / sfc_efx.rst

diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index 8229d7d..43bd9f1 100644 (file)
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -226,6 +226,16 @@ whitelist option like "-w 02:00.0,arg1=value1,...".
 Case-insensitive 1/y/yes/on or 0/n/no/off may be used to specify
 boolean parameters value.
 
+- ``rx_datapath`` [auto|efx|ef10] (default **auto**)
+
+  Choose receive datapath implementation.
+  **auto** allows the driver itself to make a choice based on firmware
+  features available and required by the datapath implementation.
+  **efx** chooses libefx-based datapath which supports Rx scatter.
+  **ef10** chooses EF10 (SFN7xxx, SFN8xxx) native datapath which is
+  more efficient than libefx-based and provides richer packet type
+  classification, but lacks Rx scatter support.
+
 - ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
 
   Choose hardware tunning to be optimized for either throughput or
@@ -242,3 +252,12 @@ boolean parameters value.
   Enable extra logging of the communication with the NIC's management CPU.
   The logging is done using RTE_LOG() with INFO level and PMD type.
   The format is consumed by the Solarflare netlogdecode cross-platform tool.
+
+- ``stats_update_period_ms`` [long] (default **1000**)
+
+  Adjust period in milliseconds to update port hardware statistics.
+  The accepted range is 0 to 65535. The value of **0** may be used
+  to disable periodic statistics update. One should note that it's
+  only possible to set an arbitrary value on SFN8xxx provided that
+  firmware version is 6.2.1.1033 or higher, otherwise any positive
+  value will select a fixed update period of **1000** milliseconds