net/szedata2: support Silicom Mango card

[dpdk.git] / doc / guides / nics / szedata2.rst

diff --git a/doc/guides/nics/szedata2.rst b/doc/guides/nics/szedata2.rst
index a2092f9..30710a8 100644 (file)
--- a/doc/guides/nics/szedata2.rst
+++ b/doc/guides/nics/szedata2.rst
@@ -5,9 +5,9 @@ SZEDATA2 poll mode driver library
 =================================
 
 The SZEDATA2 poll mode driver library implements support for the Netcope
-FPGA Boards (**NFB-***), FPGA-based programmable NICs.
-The SZEDATA2 PMD uses interface provided by the libsze2 library to communicate
-with the NFB cards over the sze2 layer.
+FPGA Boards (**NFB-40G2, NFB-100G2, NFB-200G2QL**) and Silicom **FB2CGG3** card,
+FPGA-based programmable NICs. The SZEDATA2 PMD uses interface provided by the libsze2
+library to communicate with the NFB cards over the sze2 layer.
 
 More information about the
 `NFB cards <http://www.netcope.com/en/products/fpga-boards>`_
@@ -89,7 +89,7 @@ The NFB cards are multi-port multi-queue cards, where (generally) data from any
 Ethernet port may be sent to any queue.
 They were historically represented in DPDK as a single port.
 
-However, the new NFB-200G2QL card employs an addon cable which allows to connect
+However, the new NFB-200G2QL card employs an add-on cable which allows to connect
 it to two physical PCI-E slots at the same time (see the diagram below).
 This is done to allow 200 Gbps of traffic to be transferred through the PCI-E
 bus (note that a single PCI-E 3.0 x16 slot provides only 125 Gbps theoretical