-.. BSD LICENSE
- Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2010-2014 Intel Corporation.
.. _Development_Kit_Build_System:
~~~~~~~~~~~~~~~~~~~~~~~
After installation, a build directory structure is created.
-Each build directory contains include files, libraries, and applications:
-
-.. code-block:: console
-
- ~/DPDK$ ls
- app MAINTAINERS
- config Makefile
- COPYRIGHT mk
- doc scripts
- examples lib
- tools x86_64-native-linuxapp-gcc
- x86_64-native-linuxapp-icc i686-native-linuxapp-gcc
- i686-native-linuxapp-icc
-
- ...
- ~/DEV/DPDK$ ls i686-native-linuxapp-gcc
-
- app build buildtools include kmod lib Makefile
-
-
- ~/DEV/DPDK$ ls i686-native-linuxapp-gcc/app/
- cmdline_test dump_cfg test testpmd
- cmdline_test.map dump_cfg.map test.map
- testpmd.map
-
-
- ~/DEV/DPDK$ ls i686-native-linuxapp-gcc/lib/
-
- libethdev.a librte_hash.a librte_mbuf.a librte_pmd_ixgbe.a
-
- librte_cmdline.a librte_lpm.a librte_mempool.a librte_ring.a
-
- librte_eal.a librte_pmd_e1000.a librte_timer.a
-
-
- ~/DEV/DPDK$ ls i686-native-linuxapp-gcc/include/
- arch rte_cpuflags.h rte_memcpy.h
- cmdline_cirbuf.h rte_cycles.h rte_memory.h
- cmdline.h rte_debug.h rte_mempool.h
- cmdline_parse_etheraddr.h rte_eal.h rte_memzone.h
- cmdline_parse.h rte_errno.h rte_pci_dev_ids.h
- cmdline_parse_ipaddr.h rte_ethdev.h rte_pci.h
- cmdline_parse_num.h rte_ether.h rte_per_lcore.h
- cmdline_parse_portlist.h rte_fbk_hash.h rte_prefetch.h
- cmdline_parse_string.h rte_hash_crc.h rte_random.h
- cmdline_rdline.h rte_hash.h rte_ring.h
- cmdline_socket.h rte_interrupts.h rte_rwlock.h
- cmdline_vt100.h rte_ip.h rte_sctp.h
- exec-env rte_jhash.h rte_spinlock.h
- rte_alarm.h rte_launch.h rte_string_fns.h
- rte_atomic.h rte_lcore.h rte_tailq.h
- rte_branch_prediction.h rte_log.h rte_tcp.h
- rte_byteorder.h rte_lpm.h rte_timer.h
- rte_common.h rte_malloc.h rte_udp.h
- rte_config.h rte_mbuf.h
-
+Each build directory contains include files, libraries, and applications.
A build directory is specific to a configuration that includes architecture + execution environment + toolchain.
It is possible to have several build directories sharing the same sources with different configurations.
-For instance, to create a new build directory called my_sdk_build_dir using the default configuration template config/defconfig_x86_64-linuxapp,
+For instance, to create a new build directory called my_sdk_build_dir using the default configuration template config/defconfig_x86_64-linux,
we use:
.. code-block:: console
cd ${RTE_SDK}
- make config T=x86_64-native-linuxapp-gcc O=my_sdk_build_dir
+ make config T=x86_64-native-linux-gcc O=my_sdk_build_dir
This creates a new my_sdk_build_dir directory. After that, we can compile by doing:
make O=my_sdk_build_dir
-The content of the my_sdk_build_dir is then:
-
-::
-
- -- .config # used configuration
-
- -- Makefile # wrapper that calls head Makefile
- # with $PWD as build directory
-
-
- -- build #All temporary files used during build
- +--app # process, including . o, .d, and .cmd files.
- | +-- test # For libraries, we have the .a file.
- | +-- test.o # For applications, we have the elf file.
- | `-- ...
- +-- lib
- +-- librte_eal
- | `-- ...
- +-- librte_mempool
- | +-- mempool-file1.o
- | +-- .mempool-file1.o.cmd
- | +-- .mempool-file1.o.d
- | +-- mempool-file2.o
- | +-- .mempool-file2.o.cmd
- | +-- .mempool-file2.o.d
- | `-- mempool.a
- `-- ...
-
- -- include # All include files installed by libraries
- +-- librte_mempool.h # and applications are located in this
- +-- rte_eal.h # directory. The installed files can depend
- +-- rte_spinlock.h # on configuration if needed (environment,
- +-- rte_atomic.h # architecture, ..)
- `-- \*.h ...
-
- -- lib # all compiled libraries are copied in this
- +-- librte_eal.a # directory
- +-- librte_mempool.a
- `-- \*.a ...
-
- -- app # All compiled applications are installed
- + --test # here. It includes the binary in elf format
-
Refer to
:ref:`Development Kit Root Makefile Help <Development_Kit_Root_Makefile_Help>`
for details about make commands that can be used from the root of DPDK.
.. code-block:: console
export RTE_SDK=/opt/DPDK
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
cd /path/to/my_app
For a new application, the user must create their own Makefile that includes some .mk files, such as
Misc
^^^^
-* rte.doc.mk: Documentation in the development kit framework
-
* rte.gnuconfigure.mk: Build an application that is configure-based.
* rte.subdir.mk: Build several directories in the development kit framework.
.. code-block:: c
- PMD_REGISTER_DRIVER(drv, name)
+ RTE_PMD_REGISTER_PCI(name, drv)
Creates the following symbol:
* RTE_TOOLCHAIN: Defines the toolchain (gcc , icc).
It is the same value as CONFIG_RTE_TOOLCHAIN but without the double-quotes around the string.
-* RTE_EXEC_ENV: Defines the executive environment (linuxapp).
+* RTE_EXEC_ENV: Defines the executive environment (linux).
It is the same value as CONFIG_RTE_EXEC_ENV but without the double-quotes around the string.
* RTE_KERNELDIR: This variable contains the absolute path to the kernel sources that will be used to compile the kernel modules.
* POSTCLEAN: A list of actions to be taken after cleaning. The user should use += to append data in this variable.
-* DEPDIR-y: Only used in the development kit framework to specify if the build of the current directory depends on build of another one.
+* DEPDIRS-$(DIR): Only used in the development kit framework to specify if the build of the current directory depends on build of another one.
This is needed to support parallel builds correctly.
Variables that can be Set/Overridden by the User on the Command Line Only
git.droids-corp.org / dpdk.git / blobdiff