Deprecation Notices
-------------------
-* make: Support for building DPDK with "make" has been deprecated and
- support will be removed in the 20.11 release. From 20.11 onwards, DPDK
- should be built using meson and ninja. For basic instructions see the
- `Quick-start Guide <https://core.dpdk.org/doc/quick-start/>`_ on the
- website or the `Getting Started Guide
- <https://doc.dpdk.org/guides/linux_gsg/build_dpdk.html>`_ document.
-
* meson: The minimum supported version of meson for configuring and building
DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
those users with a version earlier than 0.47.1, an updated copy of meson
- can be got using the ``pip``, or ``pip3``, tool for downloading python
- packages.
+ can be got using the ``pip3`` tool (or ``python3 -m pip``) for downloading
+ python packages.
* kvargs: The function ``rte_kvargs_process`` will get a new parameter
for returning key match count. It will ease handling of no-match case.
+* eal: To be more inclusive in choice of naming, the DPDK project
+ will replace uses of master/slave in the API's and command line arguments.
+
+ References to master/slave in relation to lcore will be renamed
+ to initial/worker. The function ``rte_get_master_lcore()``
+ will be renamed to ``rte_get_initial_lcore()``.
+ For the 20.11 release, both names will be present and the
+ old function will be marked with the deprecated tag.
+ The old function will be removed in a future version.
+
+ The iterator for worker lcores will also change:
+ ``RTE_LCORE_FOREACH_SLAVE`` will be replaced with
+ ``RTE_LCORE_FOREACH_WORKER``.
+
+ The ``master-lcore`` argument to testpmd will be replaced
+ with ``initial-lcore``. The old ``master-lcore`` argument
+ will produce a runtime notification in 20.11 release, and
+ be removed completely in a future release.
+
+* eal: The terms blacklist and whitelist to describe devices used
+ by DPDK will be replaced in the 20.11 relase.
+ This will apply to command line arguments as well as macros.
+
+ The macro ``RTE_DEV_BLACKLISTED`` will be replaced with ``RTE_DEV_EXCLUDED``
+ and ``RTE_DEV_WHITELISTED`` will be replaced with ``RTE_DEV_INCLUDED``
+ ``RTE_BUS_SCAN_BLACKLIST`` and ``RTE_BUS_SCAN_WHITELIST`` will be
+ replaced with ``RTE_BUS_SCAN_EXCLUDED`` and ``RTE_BUS_SCAN_INCLUDED``
+ respectively. Likewise ``RTE_DEVTYPE_BLACKLISTED_PCI`` and
+ ``RTE_DEVTYPE_WHITELISTED_PCI`` will be replaced with
+ ``RTE_DEVTYPE_EXCLUDED`` and ``RTE_DEVTYPE_INCLUDED``.
+
+ The old macros will be marked as deprecated in 20.11 and any
+ usage will cause a compile warning. They will be removed in
+ a future release.
+
+ The command line arguments to ``rte_eal_init`` will change from
+ ``-b, --pci-blacklist`` to ``-x, --exclude`` and
+ ``-w, --pci-whitelist`` to ``-i, --include``.
+ The old command line arguments will continue to be accepted in 20.11
+ but will cause a runtime warning message. The old arguments will
+ be removed in a future release.
+
* eal: The function ``rte_eal_remote_launch`` will return new error codes
after read or write error on the pipe, instead of calling ``rte_panic``.
-* eal: The ``rte_logs`` struct and global symbol will be made private to
- remove it from the externally visible ABI and allow it to be updated in the
- future.
-
* rte_atomicNN_xxx: These APIs do not take memory order parameter. This does
not allow for writing optimized code for all the CPU architectures supported
in DPDK. DPDK will adopt C11 atomic operations semantics and provide wrappers
These wrappers must be used for patches that need to be merged in 20.08
onwards. This change will not introduce any performance degradation.
-* rte_cio_*mb: Since the IO barriers for ARMv8 platforms are relaxed from DSB
- to DMB, rte_cio_*mb APIs provide the same functionality as rte_io_*mb
- APIs (taking all platforms into consideration). rte_io_*mb APIs should be
- used in the place of rte_cio_*mb APIs. The rte_cio_*mb APIs will be
- deprecated in 20.11 release.
-
-* igb_uio: In the view of reducing the kernel dependency from the main tree,
- as a first step, the Technical Board decided to move ``igb_uio``
- kernel module to the dpdk-kmods repository in the /linux/igb_uio/ directory
- in 20.11.
- Minutes of Technical Board Meeting of `2019-11-06
- <https://mails.dpdk.org/archives/dev/2019-November/151763.html>`_.
-
* lib: will fix extending some enum/define breaking the ABI. There are multiple
samples in DPDK that enum/define terminated with a ``.*MAX.*`` value which is
used by iterators, and arrays holding these values are sized with this
us extending existing enum/define.
One solution can be using a fixed size array instead of ``.*MAX.*`` value.
-* pci: The ``rte_kernel_driver`` enum defined in rte_dev.h will be made private
- to the PCI subsystem as it is used only by the PCI bus driver and PCI
- drivers.
- The associated field ``kdrv`` in the ethdev ``rte_eth_dev_data`` structure
- will be removed as it gave no useful abstracted information to the
- applications and had no user (neither internal nor external).
-
-* ethdev: Split the ``struct eth_dev_ops`` struct to hide it as much as possible
- will be done in 20.11.
- Currently the ``struct eth_dev_ops`` struct is accessible by the application
- because some inline functions, like ``rte_eth_tx_descriptor_status()``,
- access the struct directly.
- The struct will be separate in two, the ops used by inline functions will be
- moved next to Rx/Tx burst functions, rest of the ``struct eth_dev_ops`` struct
- will be moved to header file for drivers to hide it from applications.
+* mbuf: Some fields will be converted to dynamic API in DPDK 20.11
+ in order to reserve more space for the dynamic fields, as explained in
+ `this presentation <https://www.youtube.com/watch?v=Ttl6MlhmzWY>`_.
+ The following static fields will be moved as dynamic:
+
+ - ``timestamp``
+ - ``userdata`` / ``udata64``
+ - ``seqn``
+
+ As a consequence, the layout of the ``struct rte_mbuf`` will be re-arranged,
+ avoiding impact on vectorized implementation of the driver datapaths,
+ while evaluating performance gains of a better use of the first cache line.
+
* ethdev: the legacy filter API, including
``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
as filter types MACVLAN, ETHERTYPE, FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR,
HASH and L2_TUNNEL, is superseded by the generic flow API (rte_flow) in
PMDs that implement the latter.
- Target release for removal of the legacy API will be defined once most
- PMDs have switched to rte_flow.
+ The legacy API will be removed in DPDK 20.11.
+
+* ethdev: The flow director API, including ``rte_eth_conf.fdir_conf`` field,
+ and the related structures (``rte_fdir_*`` and ``rte_eth_fdir_*``),
+ will be removed in DPDK 20.11.
+
+* ethdev: The legacy L2 tunnel filtering API is deprecated as the rest of
+ the legacy filtering API.
+ The functions ``rte_eth_dev_l2_tunnel_eth_type_conf`` and
+ ``rte_eth_dev_l2_tunnel_offload_set`` which were not marked as deprecated,
+ will be removed in DPDK 20.11.
* ethdev: Update API functions returning ``void`` to return ``int`` with
negative errno values to indicate various error conditions (e.g.
In 19.11 PMDs will still update the field even when the offload is not
enabled.
+* ethdev: Add new fields to ``rte_eth_rxconf`` to configure the receiving
+ queues to split ingress packets into multiple segments according to the
+ specified lengths into the buffers allocated from the specified
+ memory pools. The backward compatibility to existing API is preserved.
+
* ethdev: ``rx_descriptor_done`` dev_ops and ``rte_eth_rx_descriptor_done``
- will be deprecated in 20.11 and will be removed in 21.11.
+ will be removed in 21.11.
Existing ``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
APIs can be used as replacement.
-* ethdev: Some internal APIs for driver usage are exported in the .map file.
- Now DPDK has ``__rte_internal`` marker so we can mark internal APIs and move
- them to the INTERNAL block in .map. Although these APIs are internal it will
- break the ABI checks, that is why change is planned for 20.11.
- The list of internal APIs are mainly ones listed in ``rte_ethdev_driver.h``.
-
-* traffic manager: All traffic manager API's in ``rte_tm.h`` were mistakenly made
- ABI stable in the v19.11 release. The TM maintainer and other contributors have
- agreed to keep the TM APIs as experimental in expectation of additional spec
- improvements. Therefore, all APIs in ``rte_tm.h`` will be marked back as
- experimental in v20.11 DPDK release. For more details, please see `the thread
- <https://mails.dpdk.org/archives/dev/2020-April/164970.html>`_.
-
-* pmd_dpaa: The API ``rte_pmd_dpaa_set_tx_loopback`` will have extended
- ``port_id`` definition from ``uint8_t`` to ``uint16_t``.
+* ethdev: The port mirroring API can be replaced with a more fine grain flow API.
+ The structs ``rte_eth_mirror_conf``, ``rte_eth_vlan_mirror`` and the functions
+ ``rte_eth_mirror_rule_set``, ``rte_eth_mirror_rule_reset`` will be marked
+ as deprecated in DPDK 20.11, along with the associated macros ``ETH_MIRROR_*``.
+ This API will be fully removed in DPDK 21.11.
+
+* ethdev: The ``struct rte_flow_item_eth`` and ``struct rte_flow_item_vlan``
+ structs will be modified, to include an additional value, indicating existence
+ or absence of a VLAN header following the current header, as proposed in RFC
+ https://mails.dpdk.org/archives/dev/2020-August/177536.html.
+
+* ethdev: The ``struct rte_flow_item_ipv6`` struct will be modified to include
+ additional values, indicating existence or absence of IPv6 extension headers
+ following the IPv6 header, as proposed in RFC
+ https://mails.dpdk.org/archives/dev/2020-August/177257.html.
+
+* security: The API ``rte_security_session_create`` takes only single mempool
+ for session and session private data. So the application need to create
+ mempool for twice the number of sessions needed and will also lead to
+ wastage of memory as session private data need more memory compared to session.
+ Hence the API will be modified to take two mempool pointers - one for session
+ and one for private data.
+
+* cryptodev: ``RTE_CRYPTO_AEAD_LIST_END`` from ``enum rte_crypto_aead_algorithm``,
+ ``RTE_CRYPTO_CIPHER_LIST_END`` from ``enum rte_crypto_cipher_algorithm`` and
+ ``RTE_CRYPTO_AUTH_LIST_END`` from ``enum rte_crypto_auth_algorithm``
+ will be removed.
* cryptodev: support for using IV with all sizes is added, J0 still can
be used but only when IV length in following structs ``rte_crypto_auth_xform``,
to one it means it represents IV, when is set to zero it means J0 is used
directly, in this case 16 bytes of J0 need to be passed.
-* rawdev: The rawdev APIs which take a device-specific structure as
- parameter directly, or indirectly via a "private" pointer inside another
- structure, will be modified to take an additional parameter of the
- structure size. The affected APIs will include ``rte_rawdev_info_get``,
- ``rte_rawdev_configure``, ``rte_rawdev_queue_conf_get`` and
- ``rte_rawdev_queue_setup``.
+* scheduler: The functions ``rte_cryptodev_scheduler_slave_attach``,
+ ``rte_cryptodev_scheduler_slave_detach`` and
+ ``rte_cryptodev_scheduler_slaves_get`` will be replaced in 20.11 by
+ ``rte_cryptodev_scheduler_worker_attach``,
+ ``rte_cryptodev_scheduler_worker_detach`` and
+ ``rte_cryptodev_scheduler_workers_get`` accordingly.
+
+* eventdev: Following structures will be modified to support DLB PMD
+ and future extensions:
+
+ - ``rte_event_dev_info``
+ - ``rte_event_dev_config``
+ - ``rte_event_port_conf``
+
+ Patches containing justification, documentation, and proposed modifications
+ can be found at:
+
+ - https://patches.dpdk.org/patch/71457/
+ - https://patches.dpdk.org/patch/71456/
* sched: To allow more traffic classes, flexible mapping of pipe queues to
traffic classes, and subport level configuration of pipes and queues
in "rte_sched.h". These changes are aligned to improvements suggested in the
RFC https://mails.dpdk.org/archives/dev/2018-November/120035.html.
-* mbuf: ``refcnt_atomic`` member in structures ``rte_mbuf`` and
- ``rte_mbuf_ext_shared_info`` is of type ``rte_atomic16_t``. Due to adoption
- of C11 atomic builtins it will be of type ``uint16_t``. ``refcnt_atomic``
- will be removed in 20.11. It will be replaced with ``refcnt`` of type
- ``uint16_t``.
-
* metrics: The function ``rte_metrics_init`` will have a non-void return
in order to notify errors instead of calling ``rte_exit``.
In this case the function will return -1 unless the environment is unset first
(using ``rte_power_unset_env``). Other function usage scenarios will not change.
-* python: Since the beginning of 2020, Python 2 has officially reached
- end-of-support: https://www.python.org/doc/sunset-python-2/.
- Python 2 support will be completely removed in 20.11.
- In 20.08, explicit deprecation warnings will be displayed when running
- scripts with Python 2.
+* cmdline: ``cmdline`` structure will be made opaque to hide platform-specific
+ content. On Linux and FreeBSD, supported prior to DPDK 20.11,
+ original structure will be kept until DPDK 21.11.
+
+* dpdk-setup.sh: This old script relies on deprecated stuff, and especially
+ ``make``. Given environments are too much variables for such a simple script,
+ it will be removed in DPDK 20.11.
+ Some useful parts may be converted into specific scripts.
git.droids-corp.org / dpdk.git / blobdiff