eal: deprecate function to set default mbuf pool
[dpdk.git] / doc / guides / rel_notes / deprecation.rst
index 9f5fa55..d2dd302 100644 (file)
@@ -8,29 +8,95 @@ API and ABI deprecation notices are to be posted here.
 Deprecation Notices
 -------------------
 
-* In 16.11 ABI changes are planned: the ``rte_eth_dev`` structure will be
-  extended with new function pointer ``tx_pkt_prep`` allowing verification
-  and processing of packet burst to meet HW specific requirements before
-  transmit. Also new fields will be added to the ``rte_eth_desc_lim`` structure:
-  ``nb_seg_max`` and ``nb_mtu_seg_max`` providing information about number of
-  segments limit to be transmitted by device for TSO/non-TSO packets.
-
-* ABI changes are planned for 16.11 in the ``rte_mbuf`` structure: some fields
-  may be reordered to facilitate the writing of ``data_off``, ``refcnt``, and
-  ``nb_segs`` in one operation, because some platforms have an overhead if the
-  store address is not naturally aligned. Other mbuf fields, such as the
-  ``port`` field, may be moved or removed as part of this mbuf work.
-
-* The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and
-  are respectively replaced by PKT_RX_VLAN_STRIPPED and
-  PKT_RX_QINQ_STRIPPED, that are better described. The old flags and
-  their behavior will be kept in 16.07 and will be removed in 16.11.
-
-* mempool: The functions ``rte_mempool_count`` and ``rte_mempool_free_count``
-  will be removed in 17.02.
-  They are replaced by ``rte_mempool_avail_count`` and
-  ``rte_mempool_in_use_count`` respectively.
-
-* mempool: The functions for single/multi producer/consumer are deprecated
-  and will be removed in 17.02.
-  It is replaced by ``rte_mempool_generic_get/put`` functions.
+* eal: DPDK runtime configuration file (located at
+  ``/var/run/.<prefix>_config``) will be moved. The new path will be as follows:
+
+  - if DPDK is running as root, path will be set to
+    ``/var/run/dpdk/<prefix>/config``
+  - if DPDK is not running as root and $XDG_RUNTIME_DIR is set, path will be set
+    to ``$XDG_RUNTIME_DIR/dpdk/<prefix>/config``
+  - if DPDK is not running as root and $XDG_RUNTIME_DIR is not set, path will be
+    set to ``/tmp/dpdk/<prefix>/config``
+
+* eal: both declaring and identifying devices will be streamlined in v18.05.
+  New functions will appear to query a specific port from buses, classes of
+  device and device drivers. Device declaration will be made coherent with the
+  new scheme of device identification.
+  As such, ``rte_devargs`` device representation will change.
+
+  - removal of ``name`` and ``args`` fields.
+  - The enum ``rte_devtype`` was used to identify a bus and will disappear.
+  - Functions previously deprecated will change or disappear:
+
+    + ``rte_eal_devargs_type_count``
+    + ``rte_eal_devargs_parse`` will change its format and use.
+
+* pci: Several exposed functions are misnamed.
+  The following functions are deprecated starting from v17.11 and are replaced:
+
+  - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse``
+  - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse``
+  - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp``
+
+* eal: a new set of mbuf mempool ops name APIs for user, platform and best
+  mempool names have been defined in ``rte_mbuf`` in v18.02. The uses of
+  ``rte_eal_mbuf_default_mempool_ops`` shall be replaced by
+  ``rte_mbuf_best_mempool_ops``.
+  The following function is deprecated since 18.05, and will be removed
+  in 18.08:
+
+  - ``rte_eal_mbuf_default_mempool_ops``
+
+* mbuf: The opaque ``mbuf->hash.sched`` field will be updated to support generic
+  definition in line with the ethdev TM and MTR APIs. Currently, this field
+  is defined in librte_sched in a non-generic way. The new generic format
+  will contain: queue ID, traffic class, color. Field size will not change.
+
+* ethdev: a new Tx and Rx offload API was introduced on 17.11.
+  In the new API, offloads are divided into per-port and per-queue offloads.
+  Offloads are disabled by default and enabled per application request.
+
+  In later releases the old offloading API will be deprecated, which will include:
+  - removal of ``ETH_TXQ_FLAGS_NO*`` flags.
+  - removal of ``txq_flags`` field from ``rte_eth_txconf`` struct.
+  - removal of the offloads bit-field from ``rte_eth_rxmode`` struct.
+
+* ethdev: the legacy filter API, including
+  ``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
+  as filter types MACVLAN, ETHERTYPE, FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR,
+  HASH and L2_TUNNEL, is superseded by the generic flow API (rte_flow) in
+  PMDs that implement the latter.
+  Target release for removal of the legacy API will be defined once most
+  PMDs have switched to rte_flow.
+
+* pdump: As we changed to use generic IPC, some changes in APIs and structure
+  are expected in subsequent release.
+
+  - ``rte_pdump_set_socket_dir`` will be removed;
+  - The parameter, ``path``, of ``rte_pdump_init`` will be removed;
+  - The enum ``rte_pdump_socktype`` will be removed.
+
+* cryptodev: The following changes will be made in the library
+  for 18.08:
+
+  - Removal of ``sym`` structure in ``rte_cryptodev_info`` structure,
+    containing fields not relevant anymore since the session mempool
+    is not internal in the crypto device anymore.
+  - Replacement of ``pci_dev`` field with the more generic ``rte_device``
+    structure.
+  - Functions ``rte_cryptodev_queue_pair_attach_sym_session()`` and
+    ``rte_cryptodev_queue_pair_dettach_sym_session()`` will be deprecated from
+    18.05 and removed in 18.08, as there are no drivers doing anything useful
+    with them.
+  - Functions ``rte_cryptodev_queue_pair_start()`` and
+    ``rte_cryptodev_queue_pair_stop()`` will be deprecated from 18.05
+    and removed in 18.08, as there are no drivers doing anything useful
+    with them.
+  - Some feature flags such as ``RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER`` are ambiguous,
+    so some will be replaced by more explicit flags.
+  - Function ``rte_cryptodev_get_header_session_size()`` will be deprecated
+    in 18.05, and it gets replaced with ``rte_cryptodev_sym_get_header_session_size()``.
+    It will be removed in 18.08.
+  - Function ``rte_cryptodev_get_private_session_size()`` will be deprecated
+    in 18.05, and it gets replaced with ``rte_cryptodev_sym_get_private_session_size()``.
+    It will be removed in 18.08.