+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright 2018 The DPDK contributors
+
DPDK Release 18.02
==================
-.. **Read this first.**
-
- The text in the sections below explains how to update the release notes.
-
- Use proper spelling, capitalization and punctuation in all sections.
-
- Variable and config names should be quoted as fixed width text:
- ``LIKE_THIS``.
-
- Build the docs and view the output file to ensure the changes are correct::
-
- make doc-guides-html
-
- xdg-open build/doc/html/guides/rel_notes/release_18_02.html
-
-
New Features
------------
-.. This section should contain new features added in this release. Sample
- format:
-
- * **Add a title in the past tense with a full stop.**
-
- Add a short 1-2 sentence description in the past tense. The description
- should be enough to allow someone scanning the release notes to
- understand the new feature.
-
- If the feature adds a lot of sub-features you can use a bullet list like
- this:
-
- * Added feature foo to do something.
- * Enhanced feature bar to do something else.
-
- Refer to the previous release notes for examples.
-
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
-
-* **Add function to allow releasing internal EAL resources on exit**
+* **Added function to allow releasing internal EAL resources on exit.**
During ``rte_eal_init()`` EAL allocates memory from hugepages to enable its
core libraries to perform their tasks. The ``rte_eal_cleanup()`` function
exiting. Not calling this function could result in leaking hugepages, leading
to failure during initialization of secondary processes.
-* **Added the ixgbe ethernet driver to support RSS with flow API.**
-
- Rte_flow actually defined to include RSS, but till now, RSS is out of
- rte_flow. This patch is to support igb and ixgbe NIC with existing RSS
- configuration using rte_flow API.
+* **Added igb, ixgbe and i40e ethernet driver to support RSS with flow API.**
-* **Add MAC loopback support for i40e.**
+ Added support for igb, ixgbe and i40e NICs with existing RSS configuration
+ using the ``rte_flow`` API.
- Add MAC loopback support for i40e in order to support test task asked by
- users. According to the device configuration, it will setup TX->RX loopback
- link or not.
-
-* **Add the support of run time determination of number of queues per i40e VF**
-
- The number of queue per VF is determined by its host PF. If the PCI address
- of an i40e PF is aaaa:bb.cc, the number of queues per VF can be configured
- with EAL parameter like -w aaaa:bb.cc,queue-num-per-vf=n. The value n can be
- 1, 2, 4, 8 or 16. If no such parameter is configured, the number of queues
- per VF is 4 by default.
-
-* **Added the i40e ethernet driver to support RSS with flow API.**
-
- Rte_flow actually defined to include RSS, but till now, RSS is out of
- rte_flow. This patch is to support i40e NIC with existing RSS
- configuration using rte_flow API.It also enable queue region configuration
- using flow API for i40e.
+ Also enabled queue region configuration using the ``rte_flow`` API for i40e.
* **Updated i40e driver to support PPPoE/PPPoL2TP.**
profiles which can be programmed by dynamic device personalization (DDP)
process.
+* **Added MAC loopback support for i40e.**
+
+ Added MAC loopback support for i40e in order to support test tasks requested
+ by users. It will setup ``Tx -> Rx`` loopback link according to the device
+ configuration.
+
+* **Added support of run time determination of number of queues per i40e VF.**
+
+ The number of queue per VF is determined by its host PF. If the PCI address
+ of an i40e PF is ``aaaa:bb.cc``, the number of queues per VF can be
+ configured with EAL parameter like ``-w aaaa:bb.cc,queue-num-per-vf=n``. The
+ value n can be 1, 2, 4, 8 or 16. If no such parameter is configured, the
+ number of queues per VF is 4 by default.
+
* **Updated mlx5 driver.**
Updated the mlx5 driver including the following changes:
* Added tunneled packets classification.
* Added inner checksum offload.
-* **Added the igb ethernet driver to support RSS with flow API.**
-
- Rte_flow actually defined to include RSS, but till now, RSS is out of
- rte_flow. This patch is to support igb NIC with existing RSS configuration
- using rte_flow API.
-
-* **Add AVF (Adaptive Virtual Function) net PMD.**
+* **Added AVF (Adaptive Virtual Function) net PMD.**
- A new net PMD has been added, which supports Intel® Ethernet Adaptive
- Virtual Function (AVF) with features list below:
+ Added a new net PMD called AVF (Adaptive Virtual Function), which supports
+ Intel® Ethernet Adaptive Virtual Function (AVF) with features such as:
* Basic Rx/Tx burst
* SSE vectorized Rx/Tx burst
* Rx/Tx descriptor status
* Link status update/event
+* **Added feature supports for live migration from vhost-net to vhost-user.**
+
+ Added feature supports for vhost-user to make live migration from vhost-net
+ to vhost-user possible. The features include:
+
+ * ``VIRTIO_F_ANY_LAYOUT``
+ * ``VIRTIO_F_EVENT_IDX``
+ * ``VIRTIO_NET_F_GUEST_ECN``, ``VIRTIO_NET_F_HOST_ECN``
+ * ``VIRTIO_NET_F_GUEST_UFO``, ``VIRTIO_NET_F_HOST_UFO``
+ * ``VIRTIO_NET_F_GSO``
+
+ Also added ``VIRTIO_NET_F_GUEST_ANNOUNCE`` feature support in virtio pmd.
+ In a scenario where the vhost backend doesn't have the ability to generate
+ RARP packets, the VM running virtio pmd can still be live migrated if
+ ``VIRTIO_NET_F_GUEST_ANNOUNCE`` feature is negotiated.
+
* **Updated the AESNI-MB PMD.**
The AESNI-MB PMD has been updated with additional support for:
* **Updated the DPAA_SEC crypto driver to support rte_security.**
Updated the ``dpaa_sec`` crypto PMD to support ``rte_security`` lookaside
- protocol offload for IPSec.
+ protocol offload for IPsec.
* **Added Wireless Base Band Device (bbdev) abstraction.**
The Wireless Baseband Device library is an acceleration abstraction
framework for 3gpp Layer 1 processing functions that provides a common
- programming interface for seamless opeartion on integrated or discrete
+ programming interface for seamless operation on integrated or discrete
hardware accelerators or using optimized software libraries for signal
processing.
+
The current release only supports 3GPP CRC, Turbo Coding and Rate
Matching operations, as specified in 3GPP TS 36.212.
See the :doc:`../prog_guide/bbdev` programmer's guide for more details.
-* **Added New eventdev OPDL PMD**
+* **Added New eventdev Ordered Packet Distribution Library (OPDL) PMD.**
The OPDL (Ordered Packet Distribution Library) eventdev is a specific
implementation of the eventdev API. It is particularly suited to packet
processing workloads that have high throughput and low latency requirements.
All packets follow the same path through the device. The order in which
- packets follow is determinted by the order in which queues are set up.
+ packets follow is determined by the order in which queues are set up.
Events are left on the ring until they are transmitted. As a result packets
do not go out of order.
- With this change, application can use OPDL PMD by eventdev api.
+ With this change, applications can use the OPDL PMD via the eventdev api.
-* **Added New pipeline use case for dpdk-test-eventdev application**
+* **Added new pipeline use case for dpdk-test-eventdev application.**
+ Added a new "pipeline" use case for the ``dpdk-test-eventdev`` application.
The pipeline case can be used to simulate various stages in a real world
application from packet receive to transmit while maintaining the packet
- ordering also measure the performance of the event device across the stages
- of the pipeline.
+ ordering. It can also be used to measure the performance of the event device
+ across the stages of the pipeline.
- The pipeline use case has been made generic to work will all the event
+ The pipeline use case has been made generic to work with all the event
devices based on the capabilities.
-* **Updated Eventdev Sample application to support event devices based on capability**
+* **Updated Eventdev sample application to support event devices based on capability.**
- Updated Eventdev pipeline sample application to support various types of pipelines
- based on the capabilities of the attached event and ethernet devices. Also,
- renamed the application from SW PMD specific ``eventdev_pipeline_sw_pmd``
- to PMD agnostic ``eventdev_pipeline``.
+ Updated the Eventdev pipeline sample application to support various types of
+ pipelines based on the capabilities of the attached event and ethernet
+ devices. Also, renamed the application from software PMD specific
+ ``eventdev_pipeline_sw_pmd`` to the more generic ``eventdev_pipeline``.
* **Added Rawdev, a generic device support library.**
- Rawdev library provides support for integrating any generic device type with
- DPDK framework. Generic devices are those which do not have a pre-defined
+ The Rawdev library provides support for integrating any generic device type with
+ the DPDK framework. Generic devices are those which do not have a pre-defined
type within DPDK, for example, ethernet, crypto, event etc.
+
A set of northbound APIs have been defined which encompass a generic set of
operations by allowing applications to interact with device using opaque
- structures/buffers. Also, southbound APIs provide APIs for integrating device
- either as as part of a physical bus (PCI, FSLMC etc) or through ``vdev``.
+ structures/buffers. Also, southbound APIs provide a means of integrating devices
+ either as part of a physical bus (PCI, FSLMC etc) or through ``vdev``.
See the :doc:`../prog_guide/rawdev` programmer's guide for more details.
-* **Added new multi-process communication channel**
+* **Added new multi-process communication channel.**
Added a generic channel in EAL for multi-process (primary/secondary) communication.
Consumers of this channel need to register an action with an action name to response
* ``rte_mp_request`` is for sending a request message and will block until
it gets a reply message which is sent from the peer by ``rte_mp_reply``.
-* **Added new DPDK build system using the tools "meson" and "ninja" [EXPERIMENTAL]**
-
- Added in support for building DPDK using ``meson`` and ``ninja``, which gives
- additional features, such as automatic build-time configuration, over the
- current build system using ``make``. For instructions on how to do a DPDK build
- using the new system, see the instructions in ``doc/build-sdk-meson.txt``.
-
-.. note::
-
- This new build system support is incomplete at this point and is added
- as experimental in this release. The existing build system using ``make``
- is unaffected by these changes, and can continue to be used for this
- and subsequent releases until such time as it's deprecation is announced.
-
-
-API Changes
------------
-
-.. This section should contain API changes. Sample format:
-
- * Add a short 1-2 sentence description of the API change. Use fixed width
- quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past
- tense.
-
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
-
-
-ABI Changes
------------
-
-.. This section should contain ABI changes. Sample format:
-
- * Add a short 1-2 sentence description of the ABI change that was announced
- in the previous releases and made in this release. Use fixed width quotes
- for ``rte_function_names`` or ``rte_struct_names``. Use the past tense.
+* **Added GRO support for VxLAN-tunneled packets.**
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ Added GRO support for VxLAN-tunneled packets. Supported VxLAN packets
+ must contain an outer IPv4 header and inner TCP/IPv4 headers. VxLAN
+ GRO doesn't check if input packets have correct checksums and doesn't
+ update checksums for output packets. Additionally, it assumes the
+ packets are complete (i.e., ``MF==0 && frag_off==0``), when IP
+ fragmentation is possible (i.e., ``DF==0``).
+* **Increased default Rx and Tx ring size in sample applications.**
-Removed Items
--------------
+ Increased the default ``RX_RING_SIZE`` and ``TX_RING_SIZE`` to 1024 entries
+ in testpmd and the sample applications to give better performance in the
+ general case. The user should experiment with various Rx and Tx ring sizes
+ for their specific application to get best performance.
-.. This section should contain removed items in this release. Sample format:
+* **Added new DPDK build system using the tools "meson" and "ninja" [EXPERIMENTAL].**
- * Add a short 1-2 sentence description of the removed item in the past
- tense.
-
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
-
-
-Known Issues
-------------
-
-.. This section should contain new known issues in this release. Sample format:
-
- * **Add title in present tense with full stop.**
+ Added support for building DPDK using ``meson`` and ``ninja``, which gives
+ additional features, such as automatic build-time configuration, over the
+ current build system using ``make``. For instructions on how to do a DPDK build
+ using the new system, see the instructions in ``doc/build-sdk-meson.txt``.
- Add a short 1-2 sentence description of the known issue in the present
- tense. Add information on any known workarounds.
+ .. note::
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ This new build system support is incomplete at this point and is added
+ as experimental in this release. The existing build system using ``make``
+ is unaffected by these changes, and can continue to be used for this
+ and subsequent releases until such time as it's deprecation is announced.
Shared Library Versions
-----------------------
-.. Update any library version updated in this release and prepend with a ``+``
- sign, like this:
-
- librte_acl.so.2
- + librte_cfgfile.so.2
- librte_cmdline.so.2
-
- This section is a comment. do not overwrite or remove it.
- =========================================================
-
-
The libraries prepended with a plus sign were incremented in this version.
.. code-block:: diff
librte_vhost.so.3
-
Tested Platforms
----------------
-.. This section should contain a list of platforms that were tested with this
- release.
+* Intel(R) platforms with Intel(R) NICs combinations
+
+ * CPU
+
+ * Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
+ * Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
+ * Intel(R) Xeon(R) CPU D-1541 @ 2.10GHz
+ * Intel(R) Xeon(R) CPU E5-4667 v3 @ 2.00GHz
+ * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+ * Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
+ * Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz
+ * Intel(R) Xeon(R) CPU E5-2658 v2 @ 2.40GHz
+ * Intel(R) Xeon(R) CPU E5-2658 v3 @ 2.20GHz
+ * Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz
+
+ * OS:
+
+ * CentOS 7.2
+ * Fedora 25
+ * Fedora 26
+ * Fedora 27
+ * FreeBSD 11
+ * Red Hat Enterprise Linux Server release 7.3
+ * SUSE Enterprise Linux 12
+ * Wind River Linux 8
+ * Ubuntu 14.04
+ * Ubuntu 16.04
+ * Ubuntu 16.10
+ * Ubuntu 17.10
+
+ * NICs:
+
+ * Intel(R) 82599ES 10 Gigabit Ethernet Controller
+
+ * Firmware version: 0x61bf0001
+ * Device id (pf/vf): 8086:10fb / 8086:10ed
+ * Driver version: 5.2.3 (ixgbe)
+
+ * Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T
+
+ * Firmware version: 0x800003e7
+ * Device id (pf/vf): 8086:15ad / 8086:15a8
+ * Driver version: 4.4.6 (ixgbe)
+
+ * Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G)
+
+ * Firmware version: 6.01 0x80003221
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 2.4.3 (i40e)
+
+ * Intel Corporation Ethernet Connection X722 for 10GBASE-T
+
+ * firmware-version: 6.01 0x80003221
+ * Device id: 8086:37d2 / 8086:154c
+ * Driver version: 2.4.3 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter XXV710-DA2 (2x25G)
+
+ * Firmware version: 6.01 0x80003221
+ * Device id (pf/vf): 8086:158b / 8086:154c
+ * Driver version: 2.4.3 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
+
+ * Firmware version: 6.01 0x8000321c
+ * Device id (pf/vf): 8086:1583 / 8086:154c
+ * Driver version: 2.4.3 (i40e)
+
+ * Intel(R) Corporation I350 Gigabit Network Connection
+
+ * Firmware version: 1.63, 0x80000dda
+ * Device id (pf/vf): 8086:1521 / 8086:1520
+ * Driver version: 5.3.0-k (igb)
+
+* Intel(R) platforms with Mellanox(R) NICs combinations
+
+ * CPU:
+
+ * Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz
+ * Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
+ * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+ * Intel(R) Xeon(R) CPU E5-2650 v4 @ 2.20GHz
+ * Intel(R) Xeon(R) CPU E5-2640 @ 2.50GHz
+ * Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
+
+ * OS:
+
+ * Red Hat Enterprise Linux Server release 7.5 Beta (Maipo)
+ * Red Hat Enterprise Linux Server release 7.4 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.3 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.2 (Maipo)
+ * Ubuntu 17.10
+ * Ubuntu 16.10
+ * Ubuntu 16.04
+
+ * MLNX_OFED: 4.2-1.0.0.0
+ * MLNX_OFED: 4.3-0.1.6.0
+
+ * NICs:
+
+ * Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1007
+ * Firmware version: 2.42.5000
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.21.1000 and above
+ * Firmware version: 12.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.21.1000 and above
+
+ * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.21.1000 and above
+
+ * Mellanox(R) ConnectX-5 Ex EN 100G MCX516A-CDAT (2x100G)
+
+ * Host interface: PCI Express 4.0 x16
+ * Device ID: 15b3:1019
+ * Firmware version: 16.21.1000 and above
+
+* ARM platforms with Mellanox(R) NICs combinations
+
+ * CPU:
+
+ * Qualcomm ARM 1.1 2500MHz
+
+ * OS:
+
+ * Ubuntu 16.04
+
+ * MLNX_OFED: 4.2-1.0.0.0
+
+ * NICs:
- The format is:
+ * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
- * <vendor> platform with <vendor> <type of devices> combinations
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.21.1000
- * List of CPU
- * List of OS
- * List of devices
- * Other relevant details...
+ * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.21.1000
git.droids-corp.org / dpdk.git / blobdiff