Also, make sure to start the actual text at the margin.
=========================================================
+* **Added support for using externally allocated memory in DPDK.**
+
+ DPDK has gained support for creating new ``rte_malloc`` heaps referencing
+ memory that was created outside of DPDK's own page allocator, and using that
+ memory natively with any other DPDK library or data structure.
+
* **Add support to offload more flow match and actions for CXGBE PMD**
Flow API support has been enhanced for CXGBE Poll Mode Driver to offload:
* Match items: destination MAC address.
* Action items: push/pop/rewrite vlan header.
+* **Added a devarg to use the latest supported vector path in i40e.**
+ A new devarg ``use-latest-supported-vec`` was introduced to allow users to
+ choose the latest vector path that the platform supported. For example, users
+ can use AVX2 vector path on BDW/HSW to get better performance.
+
+* **Added support for SR-IOV in netvsc PMD.**
+
+ The ``netvsc`` poll mode driver now supports the Accelerated Networking
+ SR-IOV option in Hyper-V and Azure. This is an alternative to the previous
+ vdev_netvsc, tap, and failsafe drivers combination.
+
+* **Added a new net driver for Marvell Armada 3k device.**
+
+ Added the new ``mvneta`` net driver for Marvell Armada 3k device. See the
+ :doc:`../nics/mvneta` NIC guide for more details on this new driver.
+
+* **Added NXP ENETC PMD.**
+
+ Added the new enetc driver for NXP enetc platform. See the
+ "ENETC Poll Mode Driver" document for more details on this new driver.
+
+* **Updated failsafe driver.**
+
+ Updated the failsafe driver including the following changes:
+
+ * Support for Rx and Tx queues start and stop.
+ * Support for Rx and Tx queues deferred start.
+ * Support for runtime Rx and Tx queues setup.
+ * Support multicast MAC address set.
+
+* **Added Event Ethernet Tx Adapter.**
+
+ Added event ethernet Tx adapter library that provides configuration and
+ data path APIs for the ethernet transmit stage of an event driven packet
+ processing application. These APIs abstract the implementation of the
+ transmit stage and allow the application to use eventdev PMD support or
+ a common implementation.
+
+* **Added Distributed Software Eventdev PMD.**
+
+ Added the new Distributed Software Event Device (DSW), which is a
+ pure-software eventdev driver distributing the work of scheduling
+ among all eventdev ports and the lcores using them. DSW, compared to
+ the SW eventdev PMD, sacrifices load balancing performance to
+ gain better event scheduling throughput and scalability.
+
+* **Added ability to switch queue deferred start flag on testpmd app.**
+
+ Added a console command to testpmd app, giving ability to switch
+ ``rx_deferred_start`` or ``tx_deferred_start`` flag of the specified queue of
+ the specified port. The port must be stopped before the command call in order
+ to reconfigure queues.
+
+* **Add a new sample for vDPA**
+
+ The vdpa sample application creates vhost-user sockets by using the
+ vDPA backend. vDPA stands for vhost Data Path Acceleration which utilizes
+ virtio ring compatible devices to serve virtio driver directly to enable
+ datapath acceleration. As vDPA driver can help to set up vhost datapath,
+ this application doesn't need to launch dedicated worker threads for vhost
+ enqueue/dequeue operations.
+
API Changes
-----------
Also, make sure to start the actual text at the margin.
=========================================================
+* eal: ``rte_memseg_list`` structure now has an additional flag indicating
+ whether the memseg list is externally allocated. This will have implications
+ for any users of memseg-walk-related functions, as they will now have to skip
+ externally allocated segments in most cases if the intent is to only iterate
+ over internal DPDK memory.
+ ``socket_id`` parameter across the entire DPDK has gained additional meaning,
+ as some socket ID's will now be representing externally allocated memory. No
+ changes will be required for existing code as backwards compatibility will be
+ kept, and those who do not use this feature will not see these extra socket
+ ID's. Any new API's must not check socket ID parameters themselves, and must
+ instead leave it to the memory subsystem to decide whether socket ID is a
+ valid one.
+
+* eal: The following devargs functions, which were deprecated in 18.05,
+ were removed in 18.11:
+ ``rte_eal_parse_devargs_str()``, ``rte_eal_devargs_add()``,
+ ``rte_eal_devargs_type_count()``, and ``rte_eal_devargs_dump()``.
+
+* eal: The parameters of the function ``rte_devargs_remove()`` have changed
+ from bus and device names to ``struct rte_devargs``.
+
+* mbuf: The ``__rte_mbuf_raw_free()`` and ``__rte_pktmbuf_prefree_seg()``
+ functions were deprecated since 17.05 and are replaced by
+ ``rte_mbuf_raw_free()`` and ``rte_pktmbuf_prefree_seg()``.
+
* A new device flag, RTE_ETH_DEV_NOLIVE_MAC_ADDR, changes the order of
actions inside rte_eth_dev_start regarding MAC set. Some NICs do not
support MAC changes once the port has started and with this new device
flag the MAC can be properly configured in any case. This is particularly
important for bonding.
+* The default behaviour of CRC strip offload changed. Without any specific Rx
+ offload flag, default behavior by PMD is now to strip CRC.
+ DEV_RX_OFFLOAD_CRC_STRIP offload flag has been removed.
+ To request keeping CRC, application should set ``DEV_RX_OFFLOAD_KEEP_CRC`` Rx
+ offload.
+
+* eventdev: Type of 2nd parameter to ``rte_event_eth_rx_adapter_caps_get()``
+ has been changed from uint8_t to uint16_t.
+
ABI Changes
-----------
Also, make sure to start the actual text at the margin.
=========================================================
+* eal: added ``legacy_mem`` and ``single_file_segments`` values to
+ ``rte_config`` structure on account of improving DPDK usability when
+ using either ``--legacy-mem`` or ``--single-file-segments`` flags.
+
+* eal: EAL library ABI version was changed due to previously announced work on
+ supporting external memory in DPDK:
+ - structure ``rte_memseg_list`` now has a new field indicating length
+ of memory addressed by the segment list
+ - structure ``rte_memseg_list`` now has a new flag indicating whether
+ the memseg list refers to external memory
+ - structure ``rte_malloc_heap`` now has a new field indicating socket
+ ID the malloc heap belongs to
+ - structure ``rte_mem_config`` has had its ``malloc_heaps`` array
+ resized from ``RTE_MAX_NUMA_NODES`` to ``RTE_MAX_HEAPS`` value
+ - structure ``rte_malloc_heap`` now has a ``heap_name`` member
+ - structure ``rte_eal_memconfig`` has been extended to contain next
+ socket ID for externally allocated segments
+
+* eal: The structure ``rte_device`` got a new field to reference a ``rte_bus``.
+ It is changing the size of the ``struct rte_device`` and the inherited
+ device structures of all buses.
+
Removed Items
-------------
librte_bbdev.so.1
librte_bitratestats.so.2
librte_bpf.so.1
- librte_bus_dpaa.so.1
- librte_bus_fslmc.so.1
- librte_bus_pci.so.1
- librte_bus_vdev.so.1
- librte_bus_vmbus.so.1
+ + librte_bus_dpaa.so.2
+ + librte_bus_fslmc.so.2
+ + librte_bus_ifpga.so.2
+ + librte_bus_pci.so.2
+ + librte_bus_vdev.so.2
+ + librte_bus_vmbus.so.2
librte_cfgfile.so.2
librte_cmdline.so.2
librte_common_octeontx.so.1
librte_compressdev.so.1
librte_cryptodev.so.5
librte_distributor.so.1
- librte_eal.so.8
+ + librte_eal.so.9
librte_ethdev.so.10
- librte_eventdev.so.4
+ + librte_eventdev.so.6
librte_flow_classify.so.1
librte_gro.so.1
librte_gso.so.1
librte_pmd_ring.so.2
librte_pmd_softnic.so.1
librte_pmd_vhost.so.2
+ + librte_pmd_netvsc.so.1
librte_port.so.3
librte_power.so.1
librte_rawdev.so.1
Also, make sure to start the actual text at the margin.
=========================================================
+* When using SR-IOV (VF) support with netvsc PMD and the Mellanox mlx5 bifurcated
+ driver; the Linux netvsc device must be brought up before the netvsc device is
+ unbound and passed to the DPDK.
+
Tested Platforms
----------------
This section is a comment. Do not overwrite or remove it.
Also, make sure to start the actual text at the margin.
=========================================================
-
git.droids-corp.org / dpdk.git / blobdiff