* Added support for VLAN set VID offload command.
* Added support for matching on packets withe Geneve tunnel header.
* Added hairpin support.
- * Added ConnectX6-DX support.
+ * Added ConnectX-6 Dx support.
* Flow engine selected based on RDMA Core library version.
DV flow engine selected if version is rdma-core-24.0 or higher.
Verbs flow engine selected otherwise.
* **Enabled Single Pass GCM acceleration on QAT GEN3.**
Added support for Single Pass GCM, available on QAT GEN3 only (Intel
- QuickAssist Technology C4xxx). It is automatically chosen instead of the
+ QuickAssist Technology P5xxx). It is automatically chosen instead of the
classic 2-pass mode when running on QAT GEN3, significantly improving
the performance of AES GCM operations.
* Added IOVA = VA support for KNI. KNI can operate in IOVA = VA mode when
``iova-mode=va`` EAL option is passed to the application or when bus IOVA
scheme is selected as RTE_IOVA_VA. This mode only works on Linux Kernel
- versions >= 4.9.0.
+ versions 4.10.0 and above.
* Due to IOVA to KVA address translations, based on the KNI use case there
can be a performance impact. For mitigation, forcing IOVA to PA via EAL
* event: The function ``rte_event_eth_tx_adapter_enqueue`` takes an additional
input as ``flags``. Flag ``RTE_EVENT_ETH_TX_ADAPTER_ENQUEUE_SAME_DEST`` which
- has been introduced in this release is used when used when all the packets
- enqueued in the Tx adapter are destined for the same Ethernet port ans Tx
- queue.
+ has been introduced in this release is used when all the packets enqueued in
+ the Tx adapter are destined for the same Ethernet port and Tx queue.
* sched: The pipe nodes configuration parameters such as number of pipes,
pipe queue sizes, pipe profiles, etc., are moved from port level structure
Also, make sure to start the actual text at the margin.
=========================================================
+* Intel\ |reg| platforms with Intel\ |reg| NICs combinations
+
+ * CPU
+
+ * Intel\ |reg| Atom\ |trade| CPU C3758 @ 2.20GHz
+ * Intel\ |reg| Atom\ |trade| CPU C3858 @ 2.00GHz
+ * Intel\ |reg| Atom\ |trade| CPU C3958 @ 2.00GHz
+ * Intel\ |reg| Xeon\ |reg| CPU D-1541 @ 2.10GHz
+ * Intel\ |reg| Xeon\ |reg| CPU D-1553N @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2680 0 @ 2.70GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2680 v2 @ 2.80GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2699 v3 @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2699 v4 @ 2.20GHz
+ * Intel\ |reg| Xeon\ |reg| Gold 6139 CPU @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| Gold 6252N CPU @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| Platinum 8180 CPU @ 2.50GHz
+ * Intel\ |reg| Xeon\ |reg| Platinum 8280M CPU @ 2.70GHz
+
+ * OS:
+
+ * CentOS 7.6
+ * Fedora 30
+ * FreeBSD 12.0
+ * Red Hat Enterprise Linux Server release 8.0
+ * Red Hat Enterprise Linux Server release 7.6
+ * Suse12SP3
+ * Ubuntu 14.04
+ * Ubuntu 16.04
+ * Ubuntu 16.10
+ * Ubuntu 18.04
+ * Ubuntu 19.04
+
+ * NICs:
+
+ * Intel\ |reg| Corporation Ethernet Controller E810-C for SFP (2x25G)
+
+ * Firmware version: 1.02 0x80002084 1.2538.0/1.02 0x80002082 1.2538.0
+ * Device id (pf): 8086:1593
+ * Driver version: 0.12.25 (ice)
+
+ * Intel\ |reg| Corporation Ethernet Controller E810-C for SFP (2x100G)
+
+ * Firmware version: 1.02 0x80002081 1.2538.0
+ * Device id (pf): 8086:1592
+ * Driver version: 0.12.25 (ice)
+
+ * Intel\ |reg| 82599ES 10 Gigabit Ethernet Controller
+
+ * Firmware version: 0x61bf0001
+ * Device id (pf/vf): 8086:10fb / 8086:10ed
+ * Driver version: 5.6.1 (ixgbe)
+
+ * Intel\ |reg| Corporation Ethernet Connection X552/X557-AT 10GBASE-T
+
+ * Firmware version: 0x800003e7
+ * Device id (pf/vf): 8086:15ad / 8086:15a8
+ * Driver version: 5.1.0 (ixgbe)
+
+ * Intel\ |reg| Corporation Ethernet Controller 10G X550T
+
+ * Firmware version: 0x80000482
+ * Device id (pf): 8086:1563
+ * Driver version: 5.6.1 (ixgbe)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter X710-DA4 (4x10G)
+
+ * Firmware version: 7.00 0x80004cdb
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 2.9.21 (i40e)
+
+ * Intel\ |reg| Corporation Ethernet Connection X722 for 10GbE SFP+ (4x10G)
+
+ * Firmware version: 4.10 0x80001a3c
+ * Device id (pf/vf): 8086:37d0 / 8086:37cd
+ * Driver version: 2.9.21 (i40e)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter XXV710-DA2 (2x25G)
+
+ * Firmware version: 7.00 0x80004cf8
+ * Device id (pf/vf): 8086:158b / 8086:154c
+ * Driver version: 2.9.21 (i40e)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
+
+ * Firmware version: 7.00 0x80004c97
+ * Device id (pf/vf): 8086:1583 / 8086:154c
+ * Driver version: 2.9.21 (i40e)
+
+ * Intel\ |reg| Corporation I350 Gigabit Network Connection
+
+ * Firmware version: 1.63, 0x80000cbc
+ * Device id (pf/vf): 8086:1521 / 8086:1520
+ * Driver version: 5.4.0-k (igb)
+
+ * Intel\ |reg| Corporation I210 Gigabit Network Connection
+
+ * Firmware version: 3.25, 0x800006eb
+ * Device id (pf): 8086:1533
+ * Driver version: 5.4.0-k(igb)
+
+* ARMv8 SoC combinations from Marvell (with integrated NICs)
+
+ * SoC:
+
+ * CN83xx, CN96xx, CN93xx
+
+ * OS (Based on Marvell OCTEON TX SDK-10.1.2.0):
+
+ * Arch Linux
+ * Buildroot 2018.11
+ * Ubuntu 16.04.1 LTS
+ * Ubuntu 16.10
+ * Ubuntu 18.04.1
+ * Ubuntu 19.04
+
+* Intel\ |reg| platforms with Mellanox\ |reg| NICs combinations
+
+ * CPU:
+
+ * Intel\ |reg| Xeon\ |reg| Gold 6154 CPU @ 3.00GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2697A v4 @ 2.60GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2697 v3 @ 2.60GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2680 v2 @ 2.80GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2650 v4 @ 2.20GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2640 @ 2.50GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2620 v4 @ 2.10GHz
+
+ * OS:
+
+ * Red Hat Enterprise Linux Server release 8.0 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.7 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.6 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.5 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.4 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.3 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.2 (Maipo)
+ * Ubuntu 19.04
+ * Ubuntu 18.10
+ * Ubuntu 18.04
+ * Ubuntu 16.04
+ * SUSE Linux Enterprise Server 15
+
+ * OFED:
+
+ * MLNX_OFED 4.6-1.0.1.1
+ * MLNX_OFED 4.7-1.0.0.1
+ * MLNX_OFED 4.7-3.1.9.0 and above
+
+ * upstream kernel:
+
+ * Linux 5.3 and above
+
+ * rdma-core:
+
+ * rdma-core-24.1-1 and above
+
+ * NICs:
+
+ * Mellanox\ |reg| ConnectX\ |reg|-3 Pro 40G MCX354A-FCC_Ax (2x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1007
+ * Firmware version: 2.42.5000
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 10G MCX4111A-XCAT (1x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 25G MCX4111A-ACAT (1x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 40G MCX415A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX414A-BCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX415A-CCAT (1x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 100G MCX416A-CCAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 Lx 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.26.2032 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 Ex EN 100G MCX516A-CDAT (2x100G)
+
+ * Host interface: PCI Express 4.0 x16
+ * Device ID: 15b3:1019
+ * Firmware version: 16.26.2032 and above
+
+* IBM Power 9 platforms with Mellanox\ |reg| NICs combinations
+
+ * CPU:
+
+ * POWER9 2.2 (pvr 004e 1202) 2300MHz
+
+ * OS:
+
+ * Ubuntu 18.04.1 LTS (Bionic Beaver)
+
+ * NICs:
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.26.1040
+
+ * OFED:
+
+ * MLNX_OFED 4.7-1.0.0.2
git.droids-corp.org / dpdk.git / blobdiff