also modify the default hierarchy or specify the new hierarchy through CLI for
implementing QoS scheduler. Requires ``CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y`` ``CONFIG_RTE_LIBRTE_SCHED=y``.
-Note: TX timestamping is only available in the "Full Featured" TX path. To force ``testpmd`` into this mode set ``--txqflags=0``.
-
Example::
testpmd> set fwd rxonly
Currently the only available levels are 0 (silent except for error) and 1 (fully verbose).
+set log
+~~~~~~~
+
+Set the log level for a log type::
+
+ testpmd> set log global|(type) (level)
+
+Where:
+
+* ``type`` is the log name.
+
+* ``level`` is the log level.
+
+For example, to change the global log level::
+ testpmd> set log global (level)
+
+Regexes can also be used for type. To change log level of user1, user2 and user3::
+ testpmd> set log user[1-3] (level)
+
set nbport
~~~~~~~~~~
Check the NIC Datasheet for hardware limits.
+RSS queue region
+~~~~~~~~~~~~~~~~
+
+Set RSS queue region span on a port::
+
+ testpmd> set port (port_id) queue-region region_id (value) \
+ queue_start_index (value) queue_num (value)
+
+Set flowtype mapping on a RSS queue region on a port::
+
+ testpmd> set port (port_id) queue-region region_id (value) flowtype (value)
+
+where:
+
+* For the flowtype(pctype) of packet,the specific index for each type has
+ been defined in file i40e_type.h as enum i40e_filter_pctype.
+
+Set user priority mapping on a RSS queue region on a port::
+
+ testpmd> set port (port_id) queue-region UP (value) region_id (value)
+
+Flush all queue region related configuration on a port::
+
+ testpmd> set port (port_id) queue-region flush (on|off)
+
+where:
+
+* "on"is just an enable function which server for other configuration,
+ it is for all configuration about queue region from up layer,
+ at first will only keep in DPDK softwarestored in driver,
+ only after "flush on", it commit all configuration to HW.
+ "off" is just clean all configuration about queue region just now,
+ and restore all to DPDK i40e driver default config when start up.
+
+Show all queue region related configuration info on a port::
+
+ testpmd> show port (port_id) queue-region
+
+.. note::
+
+ Queue region only support on PF by now, so these command is
+ only for configuration of queue region on PF port.
+
csum parse-tunnel
~~~~~~~~~~~~~~~~~
testpmd> set vf mac addr (port_id) (vf_id) (XX:XX:XX:XX:XX:XX)
+set eth-peer
+~~~~~~~~~~~~
+
+Set the forwarding peer address for certain port::
+
+ testpmd> set eth-peer (port_id) (perr_addr)
+
+This is equivalent to the ``--eth-peer`` command-line option.
+
set port-uta
~~~~~~~~~~~~
testpmd>set stat_qmap rx 0 2 5
+set xstats-hide-zero
+~~~~~~~~~~~~~~~~~~~~
+
+Set the option to hide zero values for xstats display::
+
+ testpmd> set xstats-hide-zero on|off
+
+.. note::
+
+ By default, the zero values are displayed for xstats.
+
set port - rx/tx (for VF)
~~~~~~~~~~~~~~~~~~~~~~~~~
The ``on`` option is equivalent to the ``--enable-scatter`` command-line option.
-port config - TX queue flags
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Set a hexadecimal bitmap of TX queue flags for all ports::
-
- testpmd> port config all txqflags value
-
-This command is equivalent to the ``--txqflags`` command-line option.
-
port config - RX Checksum
~~~~~~~~~~~~~~~~~~~~~~~~~
testpmd> port config all hw-vlan (on|off)
-Hardware VLAN is on by default.
+Hardware VLAN is off by default.
-The ``off`` option is equivalent to the ``--disable-hw-vlan`` command-line option.
+The ``on`` option is equivalent to the ``--enable-hw-vlan`` command-line option.
port config - VLAN filter
~~~~~~~~~~~~~~~~~~~~~~~~~
testpmd> port config all hw-vlan-filter (on|off)
-Hardware VLAN filter is on by default.
+Hardware VLAN filter is off by default.
-The ``off`` option is equivalent to the ``--disable-hw-vlan-filter`` command-line option.
+The ``on`` option is equivalent to the ``--enable-hw-vlan-filter`` command-line option.
port config - VLAN strip
~~~~~~~~~~~~~~~~~~~~~~~~
testpmd> port config all hw-vlan-strip (on|off)
-Hardware VLAN strip is on by default.
+Hardware VLAN strip is off by default.
-The ``off`` option is equivalent to the ``--disable-hw-vlan-strip`` command-line option.
+The ``on`` option is equivalent to the ``--enable-hw-vlan-strip`` command-line option.
port config - VLAN extend
~~~~~~~~~~~~~~~~~~~~~~~~~
Hardware VLAN extend is off by default.
-The ``off`` option is equivalent to the ``--disable-hw-vlan-extend`` command-line option.
+The ``on`` option is equivalent to the ``--enable-hw-vlan-extend`` command-line option.
port config - Drop Packets
~~~~~~~~~~~~~~~~~~~~~~~~~~
* ``flow_type_id``: software flow type id as the index of the pctype mapping table.
+port config input set
+~~~~~~~~~~~~~~~~~~~~~
+
+Config RSS/FDIR/FDIR flexible payload input set for some pctype::
+ testpmd> port config (port_id) pctype (pctype_id) \
+ (hash_inset|fdir_inset|fdir_flx_inset) \
+ (get|set|clear) field (field_idx)
+
+Clear RSS/FDIR/FDIR flexible payload input set for some pctype::
+ testpmd> port config (port_id) pctype (pctype_id) \
+ (hash_inset|fdir_inset|fdir_flx_inset) clear all
+
+where:
+
+* ``pctype_id``: hardware packet classification types.
+* ``field_idx``: hardware field index.
Link Bonding Functions
----------------------
testpmd> write regbit 0 0xEE00 31 1
port 0 PCI register at offset 0xEE00: 0x8000000A (2147483658)
+Traffic Metering and Policing
+-----------------------------
+
+The following section shows functions for configuring traffic metering and
+policing on the ethernet device through the use of generic ethdev API.
+
+show port traffic management capability
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show traffic metering and policing capability of the port::
+
+ testpmd> show port meter cap (port_id)
+
+add port meter profile (srTCM rfc2967)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add meter profile (srTCM rfc2697) to the ethernet device::
+
+ testpmd> add port meter profile srtcm_rfc2697 (port_id) (profile_id) \
+ (cir) (cbs) (ebs)
+
+where:
+
+* ``profile_id``: ID for the meter profile.
+* ``cir``: Committed Information Rate (CIR) (bytes/second).
+* ``cbs``: Committed Burst Size (CBS) (bytes).
+* ``ebs``: Excess Burst Size (EBS) (bytes).
+
+add port meter profile (trTCM rfc2968)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add meter profile (srTCM rfc2698) to the ethernet device::
+
+ testpmd> add port meter profile trtcm_rfc2698 (port_id) (profile_id) \
+ (cir) (pir) (cbs) (pbs)
+
+where:
+
+* ``profile_id``: ID for the meter profile.
+* ``cir``: Committed information rate (bytes/second).
+* ``pir``: Peak information rate (bytes/second).
+* ``cbs``: Committed burst size (bytes).
+* ``pbs``: Peak burst size (bytes).
+
+add port meter profile (trTCM rfc4115)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add meter profile (trTCM rfc4115) to the ethernet device::
+
+ testpmd> add port meter profile trtcm_rfc4115 (port_id) (profile_id) \
+ (cir) (eir) (cbs) (ebs)
+
+where:
+
+* ``profile_id``: ID for the meter profile.
+* ``cir``: Committed information rate (bytes/second).
+* ``eir``: Excess information rate (bytes/second).
+* ``cbs``: Committed burst size (bytes).
+* ``ebs``: Excess burst size (bytes).
+
+delete port meter profile
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Delete meter profile from the ethernet device::
+
+ testpmd> del port meter profile (port_id) (profile_id)
+
+create port meter
+~~~~~~~~~~~~~~~~~
+
+Create new meter object for the ethernet device::
+
+ testpmd> create port meter (port_id) (mtr_id) (profile_id) \
+ (meter_enable) (g_action) (y_action) (r_action) (stats_mask) (shared) \
+ (use_pre_meter_color) [(dscp_tbl_entry0) (dscp_tbl_entry1)...\
+ (dscp_tbl_entry63)]
+
+where:
+
+* ``mtr_id``: meter object ID.
+* ``profile_id``: ID for the meter profile.
+* ``meter_enable``: When this parameter has a non-zero value, the meter object
+ gets enabled at the time of creation, otherwise remains disabled.
+* ``g_action``: Policer action for the packet with green color.
+* ``y_action``: Policer action for the packet with yellow color.
+* ``r_action``: Policer action for the packet with red color.
+* ``stats_mask``: Mask of statistics counter types to be enabled for the
+ meter object.
+* ``shared``: When this parameter has a non-zero value, the meter object is
+ shared by multiple flows. Otherwise, meter object is used by single flow.
+* ``use_pre_meter_color``: When this parameter has a non-zero value, the
+ input color for the current meter object is determined by the latest meter
+ object in the same flow. Otherwise, the current meter object uses the
+ *dscp_table* to determine the input color.
+* ``dscp_tbl_entryx``: DSCP table entry x providing meter providing input
+ color, 0 <= x <= 63.
+
+enable port meter
+~~~~~~~~~~~~~~~~~
+
+Enable meter for the ethernet device::
+
+ testpmd> enable port meter (port_id) (mtr_id)
+
+disable port meter
+~~~~~~~~~~~~~~~~~~
+
+Disable meter for the ethernet device::
+
+ testpmd> disable port meter (port_id) (mtr_id)
+
+delete port meter
+~~~~~~~~~~~~~~~~~
+
+Delete meter for the ethernet device::
+
+ testpmd> del port meter (port_id) (mtr_id)
+
+Set port meter profile
+~~~~~~~~~~~~~~~~~~~~~~
+
+Set meter profile for the ethernet device::
+
+ testpmd> set port meter profile (port_id) (mtr_id) (profile_id)
+
+set port meter dscp table
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set meter dscp table for the ethernet device::
+
+ testpmd> set port meter dscp table (port_id) (mtr_id) [(dscp_tbl_entry0) \
+ (dscp_tbl_entry1)...(dscp_tbl_entry63)]
+
+set port meter policer action
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set meter policer action for the ethernet device::
+
+ testpmd> set port meter policer action (port_id) (mtr_id) (action_mask) \
+ (action0) [(action1) (action1)]
+
+where:
+
+* ``action_mask``: Bit mask indicating which policer actions need to be
+ updated. One or more policer actions can be updated in a single function
+ invocation. To update the policer action associated with color C, bit
+ (1 << C) needs to be set in *action_mask* and element at position C
+ in the *actions* array needs to be valid.
+* ``actionx``: Policer action for the color x,
+ RTE_MTR_GREEN <= x < RTE_MTR_COLORS
+
+set port meter stats mask
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set meter stats mask for the ethernet device::
+
+ testpmd> set port meter stats mask (port_id) (mtr_id) (stats_mask)
+
+where:
+
+* ``stats_mask``: Bit mask indicating statistics counter types to be enabled.
+
+show port meter stats
+~~~~~~~~~~~~~~~~~~~~~
+
+Show meter stats of the ethernet device::
+
+ testpmd> show port meter stats (port_id) (mtr_id) (clear)
+
+where:
+
+* ``clear``: Flag that indicates whether the statistics counters should
+ be cleared (i.e. set to zero) immediately after they have been read or not.
Traffic Management
------------------
Show traffic management hierarchy level capability of the port::
- testpmd> show port tm cap (port_id) (level_id)
+ testpmd> show port tm level cap (port_id) (level_id)
show port traffic management capability (hierarchy node level)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Show the traffic management hierarchy node capability of the port::
- testpmd> show port tm cap (port_id) (node_id)
+ testpmd> show port tm node cap (port_id) (node_id)
show port traffic management hierarchy node type
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
testpmd> add port tm nonleaf node (port_id) (node_id) (parent_node_id) \
(priority) (weight) (level_id) (shaper_profile_id) \
- (shared_shaper_id) (n_shared_shapers) (n_sp_priorities) (stats_mask) \
+ (n_sp_priorities) (stats_mask) (n_shared_shapers) \
+ [(shared_shaper_0) (shared_shaper_1) ...] \
where:
* ``level_id``: Hiearchy level of the node.
* ``shaper_profile_id``: Shaper profile ID of the private shaper to be used by
the node.
-* ``shared_shaper_id``: Shared shaper id.
-* ``n_shared_shapers``: Number of shared shapers.
* ``n_sp_priorities``: Number of strict priorities.
* ``stats_mask``: Mask of statistics counter types to be enabled for this node.
+* ``n_shared_shapers``: Number of shared shapers.
+* ``shared_shaper_id``: Shared shaper id.
Add port traffic management hierarchy leaf node
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
testpmd> add port tm leaf node (port_id) (node_id) (parent_node_id) \
(priority) (weight) (level_id) (shaper_profile_id) \
- (shared_shaper_id) (n_shared_shapers) (cman_mode) \
- (wred_profile_id) (stats_mask) \
+ (cman_mode) (wred_profile_id) (stats_mask) (n_shared_shapers) \
+ [(shared_shaper_id) (shared_shaper_id) ...] \
where:
* ``level_id``: Hiearchy level of the node.
* ``shaper_profile_id``: Shaper profile ID of the private shaper to be used by
the node.
-* ``shared_shaper_id``: Shared shaper id.
-* ``n_shared_shapers``: Number of shared shapers.
* ``cman_mode``: Congestion management mode to be enabled for this node.
* ``wred_profile_id``: WRED profile id to be enabled for this node.
* ``stats_mask``: Mask of statistics counter types to be enabled for this node.
+* ``n_shared_shapers``: Number of shared shapers.
+* ``shared_shaper_id``: Shared shaper id.
Delete port traffic management hierarchy node
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The hardware checks a match between the masked fields of the received packets and the programmed filters.
The masked fields are for tunnel flow.
+* Perfect-raw-flow-type match filters.
+ The hardware checks a match between the masked fields of the received packets and pre-loaded raw (template) packet.
+ The masked fields are specified by input sets.
+
The Flow Director filters can match the different fields for different type of packet: flow type, specific input set
per flow type and the flexible payload.
The Flow Director can also mask out parts of all of these fields so that filters
are only applied to certain fields or parts of the fields.
+Note that for raw flow type mode the source and destination fields in the
+raw packet buffer need to be presented in a reversed order with respect
+to the expected received packets.
+For example: IP source and destination addresses or TCP/UDP/SCTP
+source and destination ports
+
Different NICs may have different capabilities, command show port fdir (port_id) can be used to acquire the information.
# Commands to add flow director filters of different flow types::
flexbytes (flexbytes_value) (drop|fwd) \
queue (queue_id) fd_id (fd_id_value)
+ flow_director_filter (port_id) mode raw (add|del|update) flow (flow_id) \
+ (drop|fwd) queue (queue_id) fd_id (fd_id_value) \
+ packet (packet file name)
+
For example, to add an ipv4-udp flow type filter::
testpmd> flow_director_filter 0 mode IP add flow ipv4-udp src 2.2.2.3 32 \
set_hash_global_config (port_id) (toeplitz|simple_xor|default) \
(ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|ipv6-frag| \
- ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload) \
+ ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload|<flow_id>) \
(enable|disable)
For example, to enable simple_xor for flow type of ipv6 on port 2::
set_hash_input_set (port_id) (ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp| \
ipv4-other|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other| \
- l2_payload) (ovlan|ivlan|src-ipv4|dst-ipv4|src-ipv6|dst-ipv6|ipv4-tos| \
- ipv4-proto|ipv6-tc|ipv6-next-header|udp-src-port|udp-dst-port| \
+ l2_payload|<flow_id>) (ovlan|ivlan|src-ipv4|dst-ipv4|src-ipv6|dst-ipv6| \
+ ipv4-tos|ipv4-proto|ipv6-tc|ipv6-next-header|udp-src-port|udp-dst-port| \
tcp-src-port|tcp-dst-port|sctp-src-port|sctp-dst-port|sctp-veri-tag| \
udp-key|gre-key|fld-1st|fld-2nd|fld-3rd|fld-4th|fld-5th|fld-6th|fld-7th| \
fld-8th|none) (select|add)
set_fdir_input_set (port_id) (ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp| \
ipv4-other|ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other| \
- l2_payload) (ivlan|ethertype|src-ipv4|dst-ipv4|src-ipv6|dst-ipv6|ipv4-tos| \
- ipv4-proto|ipv4-ttl|ipv6-tc|ipv6-next-header|ipv6-hop-limits| \
+ l2_payload|<flow_id>) (ivlan|ethertype|src-ipv4|dst-ipv4|src-ipv6|dst-ipv6| \
+ ipv4-tos|ipv4-proto|ipv4-ttl|ipv6-tc|ipv6-next-header|ipv6-hop-limits| \
tudp-src-port|udp-dst-port|cp-src-port|tcp-dst-port|sctp-src-port| \
sctp-dst-port|sctp-veri-tag|none) (select|add)
- ``teid {unsigned}``: tunnel endpoint identifier.
+- ``geneve``: match GENEVE header.
+
+ - ``vni {unsigned}``: virtual network identifier.
+ - ``protocol {unsigned}``: protocol type.
+
Actions list
^^^^^^^^^^^^
git.droids-corp.org / dpdk.git / blobdiff