* ``ieee1588``: Demonstrate L2 IEEE1588 V2 PTP timestamping for RX and TX. Requires ``CONFIG_RTE_LIBRTE_IEEE1588=y``.
-Note: TX timestamping is only available in the "Full Featured" TX path. To force ``testpmd`` into this mode set ``--txqflags=0``.
+* ``tm``: Traffic Management forwarding mode
+ Demonstrates the use of ethdev traffic management APIs and softnic PMD for
+ QoS traffic management. In this mode, 5-level hierarchical QoS scheduler is
+ available as an default option that can be enabled through CLI. The user can
+ also modify the default hierarchy or specify the new hierarchy through CLI for
+ implementing QoS scheduler. Requires ``CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y`` ``CONFIG_RTE_LIBRTE_SCHED=y``.
Example::
testpmd> read txd 0 0 4
0x00000001 - 0x24C3C440 / 0x000F0000 - 0x2330003C
+ddp get list
+~~~~~~~~~~~~
+
+Get loaded dynamic device personalization (DDP) package info list::
+
+ testpmd> ddp get list (port_id)
+
+ddp get info
+~~~~~~~~~~~~
+
+Display information about dynamic device personalization (DDP) profile::
+
+ testpmd> ddp get info (profile_path)
+
show vf stats
~~~~~~~~~~~~~
testpmd> clear vf stats (port_id) (vf_id)
+show port pctype mapping
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+List all items from the pctype mapping table::
+
+ testpmd> show port (port_id) pctype mapping
+
+
Configuration Functions
-----------------------
Check the NIC Datasheet for hardware limits.
+RSS queue region
+~~~~~~~~~~~~~~~~
+
+Set RSS queue region span on a port::
+
+ testpmd> set port (port_id) queue-region region_id (value) \
+ queue_start_index (value) queue_num (value)
+
+Set flowtype mapping on a RSS queue region on a port::
+
+ testpmd> set port (port_id) queue-region region_id (value) flowtype (value)
+
+where:
+
+* For the flowtype(pctype) of packet,the specific index for each type has
+ been defined in file i40e_type.h as enum i40e_filter_pctype.
+
+Set user priority mapping on a RSS queue region on a port::
+
+ testpmd> set port (port_id) queue-region UP (value) region_id (value)
+
+Flush all queue region related configuration on a port::
+
+ testpmd> set port (port_id) queue-region flush (on|off)
+
+where:
+
+* "on"is just an enable function which server for other configuration,
+ it is for all configuration about queue region from up layer,
+ at first will only keep in DPDK softwarestored in driver,
+ only after "flush on", it commit all configuration to HW.
+ "off" is just clean all configuration about queue region just now,
+ and restore all to DPDK i40e driver default config when start up.
+
+Show all queue region related configuration info on a port::
+
+ testpmd> show port (port_id) queue-region
+
+.. note::
+
+ Queue region only support on PF by now, so these command is
+ only for configuration of queue region on PF port.
+
csum parse-tunnel
~~~~~~~~~~~~~~~~~
testpmd> tso show (port_id)
+set port - gro
+~~~~~~~~~~~~~~
+
+Enable or disable GRO in ``csum`` forwarding engine::
+
+ testpmd> set port <port_id> gro on|off
+
+If enabled, the csum forwarding engine will perform GRO on the TCP/IPv4
+packets received from the given port.
+
+If disabled, packets received from the given port won't be performed
+GRO. By default, GRO is disabled for all ports.
+
+.. note::
+
+ When enable GRO for a port, TCP/IPv4 packets received from the port
+ will be performed GRO. After GRO, all merged packets have bad
+ checksums, since the GRO library doesn't re-calculate checksums for
+ the merged packets. Therefore, if users want the merged packets to
+ have correct checksums, please select HW IP checksum calculation and
+ HW TCP checksum calculation for the port which the merged packets are
+ transmitted to.
+
+show port - gro
+~~~~~~~~~~~~~~~
+
+Display GRO configuration for a given port::
+
+ testpmd> show port <port_id> gro
+
+set gro flush
+~~~~~~~~~~~~~
+
+Set the cycle to flush the GROed packets from reassembly tables::
+
+ testpmd> set gro flush <cycles>
+
+When enable GRO, the csum forwarding engine performs GRO on received
+packets, and the GROed packets are stored in reassembly tables. Users
+can use this command to determine when the GROed packets are flushed
+from the reassembly tables.
+
+The ``cycles`` is measured in GRO operation times. The csum forwarding
+engine flushes the GROed packets from the tables every ``cycles`` GRO
+operations.
+
+By default, the value of ``cycles`` is 1, which means flush GROed packets
+from the reassembly tables as soon as one GRO operation finishes. The value
+of ``cycles`` should be in the range of 1 to ``GRO_MAX_FLUSH_CYCLES``.
+
+Please note that the large value of ``cycles`` may cause the poor TCP/IP
+stack performance. Because the GROed packets are delayed to arrive the
+stack, thus causing more duplicated ACKs and TCP retransmissions.
+
+set port - gso
+~~~~~~~~~~~~~~
+
+Toggle per-port GSO support in ``csum`` forwarding engine::
+
+ testpmd> set port <port_id> gso on|off
+
+If enabled, the csum forwarding engine will perform GSO on supported IPv4
+packets, transmitted on the given port.
+
+If disabled, packets transmitted on the given port will not undergo GSO.
+By default, GSO is disabled for all ports.
+
+.. note::
+
+ When GSO is enabled on a port, supported IPv4 packets transmitted on that
+ port undergo GSO. Afterwards, the segmented packets are represented by
+ multi-segment mbufs; however, the csum forwarding engine doesn't calculation
+ of checksums for GSO'd segments in SW. As a result, if users want correct
+ checksums in GSO segments, they should enable HW checksum calculation for
+ GSO-enabled ports.
+
+ For example, HW checksum calculation for VxLAN GSO'd packets may be enabled
+ by setting the following options in the csum forwarding engine:
+
+ testpmd> csum set outer_ip hw <port_id>
+
+ testpmd> csum set ip hw <port_id>
+
+ testpmd> csum set tcp hw <port_id>
+
+set gso segsz
+~~~~~~~~~~~~~
+
+Set the maximum GSO segment size (measured in bytes), which includes the
+packet header and the packet payload for GSO-enabled ports (global)::
+
+ testpmd> set gso segsz <length>
+
+show port - gso
+~~~~~~~~~~~~~~~
+
+Display the status of Generic Segmentation Offload for a given port::
+
+ testpmd> show port <port_id> gso
+
mac_addr add
~~~~~~~~~~~~
testpmd>set stat_qmap rx 0 2 5
+set xstats-hide-zero
+~~~~~~~~~~~~~~~~~~~~
+
+Set the option to hide zero values for xstats display::
+
+ testpmd> set xstats-hide-zero on|off
+
+.. note::
+
+ By default, the zero values are displayed for xstats.
+
set port - rx/tx (for VF)
~~~~~~~~~~~~~~~~~~~~~~~~~
Delete an E-tag forwarding filter on a port::
testpmd> E-tag set filter del e-tag-id (value) port (port_id)
+ddp add
+~~~~~~~
+
+Load a dynamic device personalization (DDP) package::
+
+ testpmd> ddp add (port_id) (package_path[,output_path])
+
+ddp del
+~~~~~~~
+
+Delete a dynamic device personalization package::
+
+ testpmd> ddp del (port_id) (package_path)
+
ptype mapping
~~~~~~~~~~~~~
The ``on`` option is equivalent to the ``--enable-scatter`` command-line option.
-port config - TX queue flags
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Set a hexadecimal bitmap of TX queue flags for all ports::
-
- testpmd> port config all txqflags value
-
-This command is equivalent to the ``--txqflags`` command-line option.
-
port config - RX Checksum
~~~~~~~~~~~~~~~~~~~~~~~~~
testpmd> port config (port_id|all) l2-tunnel E-tag (enable|disable)
+port config pctype mapping
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Reset pctype mapping table::
+
+ testpmd> port config (port_id) pctype mapping reset
+
+Update hardware defined pctype to software defined flow type mapping table::
+
+ testpmd> port config (port_id) pctype mapping update (pctype_id_0[,pctype_id_1]*) (flow_type_id)
+
+where:
+
+* ``pctype_id_x``: hardware pctype id as index of bit in bitmask value of the pctype mapping table.
+
+* ``flow_type_id``: software flow type id as the index of the pctype mapping table.
+
Link Bonding Functions
----------------------
testpmd> set bonding mon_period 5 150
+set bonding lacp dedicated_queue
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enable dedicated tx/rx queues on bonding devices slaves to handle LACP control plane traffic
+when in mode 4 (link-aggregration-802.3ad)::
+
+ testpmd> set bonding lacp dedicated_queues (port_id) (enable|disable)
+
+
+set bonding agg_mode
+~~~~~~~~~~~~~~~~~~~~
+
+Enable one of the specific aggregators mode when in mode 4 (link-aggregration-802.3ad)::
+
+ testpmd> set bonding agg_mode (port_id) (bandwidth|count|stable)
+
+
show bonding config
~~~~~~~~~~~~~~~~~~~
testpmd> write regbit 0 0xEE00 31 1
port 0 PCI register at offset 0xEE00: 0x8000000A (2147483658)
+Traffic Metering and Policing
+-----------------------------
+
+The following section shows functions for configuring traffic metering and
+policing on the ethernet device through the use of generic ethdev API.
+
+show port traffic management capability
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show traffic metering and policing capability of the port::
+
+ testpmd> show port meter cap (port_id)
+
+add port meter profile (srTCM rfc2967)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add meter profile (srTCM rfc2697) to the ethernet device::
+
+ testpmd> add port meter profile srtcm_rfc2697 (port_id) (profile_id) \
+ (cir) (cbs) (ebs)
+
+where:
+
+* ``profile_id``: ID for the meter profile.
+* ``cir``: Committed Information Rate (CIR) (bytes/second).
+* ``cbs``: Committed Burst Size (CBS) (bytes).
+* ``ebs``: Excess Burst Size (EBS) (bytes).
+
+add port meter profile (trTCM rfc2968)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add meter profile (srTCM rfc2698) to the ethernet device::
+
+ testpmd> add port meter profile trtcm_rfc2698 (port_id) (profile_id) \
+ (cir) (pir) (cbs) (pbs)
+
+where:
+
+* ``profile_id``: ID for the meter profile.
+* ``cir``: Committed information rate (bytes/second).
+* ``pir``: Peak information rate (bytes/second).
+* ``cbs``: Committed burst size (bytes).
+* ``pbs``: Peak burst size (bytes).
+
+add port meter profile (trTCM rfc4115)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add meter profile (trTCM rfc4115) to the ethernet device::
+
+ testpmd> add port meter profile trtcm_rfc4115 (port_id) (profile_id) \
+ (cir) (eir) (cbs) (ebs)
+
+where:
+
+* ``profile_id``: ID for the meter profile.
+* ``cir``: Committed information rate (bytes/second).
+* ``eir``: Excess information rate (bytes/second).
+* ``cbs``: Committed burst size (bytes).
+* ``ebs``: Excess burst size (bytes).
+
+delete port meter profile
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Delete meter profile from the ethernet device::
+
+ testpmd> del port meter profile (port_id) (profile_id)
+
+create port meter
+~~~~~~~~~~~~~~~~~
+
+Create new meter object for the ethernet device::
+
+ testpmd> create port meter (port_id) (mtr_id) (profile_id) \
+ (meter_enable) (g_action) (y_action) (r_action) (stats_mask) (shared) \
+ (use_pre_meter_color) [(dscp_tbl_entry0) (dscp_tbl_entry1)...\
+ (dscp_tbl_entry63)]
+
+where:
+
+* ``mtr_id``: meter object ID.
+* ``profile_id``: ID for the meter profile.
+* ``meter_enable``: When this parameter has a non-zero value, the meter object
+ gets enabled at the time of creation, otherwise remains disabled.
+* ``g_action``: Policer action for the packet with green color.
+* ``y_action``: Policer action for the packet with yellow color.
+* ``r_action``: Policer action for the packet with red color.
+* ``stats_mask``: Mask of statistics counter types to be enabled for the
+ meter object.
+* ``shared``: When this parameter has a non-zero value, the meter object is
+ shared by multiple flows. Otherwise, meter object is used by single flow.
+* ``use_pre_meter_color``: When this parameter has a non-zero value, the
+ input color for the current meter object is determined by the latest meter
+ object in the same flow. Otherwise, the current meter object uses the
+ *dscp_table* to determine the input color.
+* ``dscp_tbl_entryx``: DSCP table entry x providing meter providing input
+ color, 0 <= x <= 63.
+
+enable port meter
+~~~~~~~~~~~~~~~~~
+
+Enable meter for the ethernet device::
+
+ testpmd> enable port meter (port_id) (mtr_id)
+
+disable port meter
+~~~~~~~~~~~~~~~~~~
+
+Disable meter for the ethernet device::
+
+ testpmd> disable port meter (port_id) (mtr_id)
+
+delete port meter
+~~~~~~~~~~~~~~~~~
+
+Delete meter for the ethernet device::
+
+ testpmd> del port meter (port_id) (mtr_id)
+
+Set port meter profile
+~~~~~~~~~~~~~~~~~~~~~~
+
+Set meter profile for the ethernet device::
+
+ testpmd> set port meter profile (port_id) (mtr_id) (profile_id)
+
+set port meter dscp table
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set meter dscp table for the ethernet device::
+
+ testpmd> set port meter dscp table (port_id) (mtr_id) [(dscp_tbl_entry0) \
+ (dscp_tbl_entry1)...(dscp_tbl_entry63)]
+
+set port meter policer action
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set meter policer action for the ethernet device::
+
+ testpmd> set port meter policer action (port_id) (mtr_id) (action_mask) \
+ (action0) [(action1) (action1)]
+
+where:
+
+* ``action_mask``: Bit mask indicating which policer actions need to be
+ updated. One or more policer actions can be updated in a single function
+ invocation. To update the policer action associated with color C, bit
+ (1 << C) needs to be set in *action_mask* and element at position C
+ in the *actions* array needs to be valid.
+* ``actionx``: Policer action for the color x,
+ RTE_MTR_GREEN <= x < RTE_MTR_COLORS
+
+set port meter stats mask
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set meter stats mask for the ethernet device::
+
+ testpmd> set port meter stats mask (port_id) (mtr_id) (stats_mask)
+
+where:
+
+* ``stats_mask``: Bit mask indicating statistics counter types to be enabled.
+
+show port meter stats
+~~~~~~~~~~~~~~~~~~~~~
+
+Show meter stats of the ethernet device::
+
+ testpmd> show port meter stats (port_id) (mtr_id) (clear)
+
+where:
+
+* ``clear``: Flag that indicates whether the statistics counters should
+ be cleared (i.e. set to zero) immediately after they have been read or not.
+
+Traffic Management
+------------------
+
+The following section shows functions for configuring traffic management on
+on the ethernet device through the use of generic TM API.
+
+show port traffic management capability
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show traffic management capability of the port::
+
+ testpmd> show port tm cap (port_id)
+
+show port traffic management capability (hierarchy level)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show traffic management hierarchy level capability of the port::
+
+ testpmd> show port tm cap (port_id) (level_id)
+
+show port traffic management capability (hierarchy node level)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show the traffic management hierarchy node capability of the port::
+
+ testpmd> show port tm cap (port_id) (node_id)
+
+show port traffic management hierarchy node type
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show the port traffic management hierarchy node type::
+
+ testpmd> show port tm node type (port_id) (node_id)
+
+show port traffic management hierarchy node stats
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show the port traffic management hierarchy node statistics::
+
+ testpmd> show port tm node stats (port_id) (node_id) (clear)
+
+where:
+
+* ``clear``: When this parameter has a non-zero value, the statistics counters
+ are cleared (i.e. set to zero) immediately after they have been read,
+ otherwise the statistics counters are left untouched.
+
+Add port traffic management private shaper profile
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add the port traffic management private shaper profile::
+
+ testpmd> add port tm node shaper profile (port_id) (shaper_profile_id) \
+ (tb_rate) (tb_size) (packet_length_adjust)
+
+where:
+
+* ``shaper_profile id``: Shaper profile ID for the new profile.
+* ``tb_rate``: Token bucket rate (bytes per second).
+* ``tb_size``: Token bucket size (bytes).
+* ``packet_length_adjust``: The value (bytes) to be added to the length of
+ each packet for the purpose of shaping. This parameter value can be used to
+ correct the packet length with the framing overhead bytes that are consumed
+ on the wire.
+
+Delete port traffic management private shaper profile
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Delete the port traffic management private shaper::
+
+ testpmd> del port tm node shaper profile (port_id) (shaper_profile_id)
+
+where:
+
+* ``shaper_profile id``: Shaper profile ID that needs to be deleted.
+
+Add port traffic management shared shaper
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Create the port traffic management shared shaper::
+
+ testpmd> add port tm node shared shaper (port_id) (shared_shaper_id) \
+ (shaper_profile_id)
+
+where:
+
+* ``shared_shaper_id``: Shared shaper ID to be created.
+* ``shaper_profile id``: Shaper profile ID for shared shaper.
+
+Set port traffic management shared shaper
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Update the port traffic management shared shaper::
+
+ testpmd> set port tm node shared shaper (port_id) (shared_shaper_id) \
+ (shaper_profile_id)
+
+where:
+
+* ``shared_shaper_id``: Shared shaper ID to be update.
+* ``shaper_profile id``: Shaper profile ID for shared shaper.
+
+Delete port traffic management shared shaper
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Delete the port traffic management shared shaper::
+
+ testpmd> del port tm node shared shaper (port_id) (shared_shaper_id)
+
+where:
+
+* ``shared_shaper_id``: Shared shaper ID to be deleted.
+
+Set port traffic management hiearchy node private shaper
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+set the port traffic management hierarchy node private shaper::
+
+ testpmd> set port tm node shaper profile (port_id) (node_id) \
+ (shaper_profile_id)
+
+where:
+
+* ``shaper_profile id``: Private shaper profile ID to be enabled on the
+ hierarchy node.
+
+Add port traffic management WRED profile
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Create a new WRED profile::
+
+ testpmd> add port tm node wred profile (port_id) (wred_profile_id) \
+ (color_g) (min_th_g) (max_th_g) (maxp_inv_g) (wq_log2_g) \
+ (color_y) (min_th_y) (max_th_y) (maxp_inv_y) (wq_log2_y) \
+ (color_r) (min_th_r) (max_th_r) (maxp_inv_r) (wq_log2_r)
+
+where:
+
+* ``wred_profile id``: Identifier for the newly create WRED profile
+* ``color_g``: Packet color (green)
+* ``min_th_g``: Minimum queue threshold for packet with green color
+* ``max_th_g``: Minimum queue threshold for packet with green color
+* ``maxp_inv_g``: Inverse of packet marking probability maximum value (maxp)
+* ``wq_log2_g``: Negated log2 of queue weight (wq)
+* ``color_y``: Packet color (yellow)
+* ``min_th_y``: Minimum queue threshold for packet with yellow color
+* ``max_th_y``: Minimum queue threshold for packet with yellow color
+* ``maxp_inv_y``: Inverse of packet marking probability maximum value (maxp)
+* ``wq_log2_y``: Negated log2 of queue weight (wq)
+* ``color_r``: Packet color (red)
+* ``min_th_r``: Minimum queue threshold for packet with yellow color
+* ``max_th_r``: Minimum queue threshold for packet with yellow color
+* ``maxp_inv_r``: Inverse of packet marking probability maximum value (maxp)
+* ``wq_log2_r``: Negated log2 of queue weight (wq)
+
+Delete port traffic management WRED profile
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Delete the WRED profile::
+
+ testpmd> del port tm node wred profile (port_id) (wred_profile_id)
+
+Add port traffic management hierarchy nonleaf node
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add nonleaf node to port traffic management hiearchy::
+
+ testpmd> add port tm nonleaf node (port_id) (node_id) (parent_node_id) \
+ (priority) (weight) (level_id) (shaper_profile_id) \
+ (n_sp_priorities) (stats_mask) (n_shared_shapers) \
+ [(shared_shaper_0) (shared_shaper_1) ...] \
+
+where:
+
+* ``parent_node_id``: Node ID of the parent.
+* ``priority``: Node priority (highest node priority is zero). This is used by
+ the SP algorithm running on the parent node for scheduling this node.
+* ``weight``: Node weight (lowest weight is one). The node weight is relative
+ to the weight sum of all siblings that have the same priority. It is used by
+ the WFQ algorithm running on the parent node for scheduling this node.
+* ``level_id``: Hiearchy level of the node.
+* ``shaper_profile_id``: Shaper profile ID of the private shaper to be used by
+ the node.
+* ``n_sp_priorities``: Number of strict priorities.
+* ``stats_mask``: Mask of statistics counter types to be enabled for this node.
+* ``n_shared_shapers``: Number of shared shapers.
+* ``shared_shaper_id``: Shared shaper id.
+
+Add port traffic management hierarchy leaf node
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add leaf node to port traffic management hiearchy::
+
+ testpmd> add port tm leaf node (port_id) (node_id) (parent_node_id) \
+ (priority) (weight) (level_id) (shaper_profile_id) \
+ (cman_mode) (wred_profile_id) (stats_mask) (n_shared_shapers) \
+ [(shared_shaper_id) (shared_shaper_id) ...] \
+
+where:
+
+* ``parent_node_id``: Node ID of the parent.
+* ``priority``: Node priority (highest node priority is zero). This is used by
+ the SP algorithm running on the parent node for scheduling this node.
+* ``weight``: Node weight (lowest weight is one). The node weight is relative
+ to the weight sum of all siblings that have the same priority. It is used by
+ the WFQ algorithm running on the parent node for scheduling this node.
+* ``level_id``: Hiearchy level of the node.
+* ``shaper_profile_id``: Shaper profile ID of the private shaper to be used by
+ the node.
+* ``cman_mode``: Congestion management mode to be enabled for this node.
+* ``wred_profile_id``: WRED profile id to be enabled for this node.
+* ``stats_mask``: Mask of statistics counter types to be enabled for this node.
+* ``n_shared_shapers``: Number of shared shapers.
+* ``shared_shaper_id``: Shared shaper id.
+
+Delete port traffic management hierarchy node
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Delete node from port traffic management hiearchy::
+
+ testpmd> del port tm node (port_id) (node_id)
+
+Update port traffic management hierarchy parent node
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Update port traffic management hierarchy parent node::
+
+ testpmd> set port tm node parent (port_id) (node_id) (parent_node_id) \
+ (priority) (weight)
+
+This function can only be called after the hierarchy commit invocation. Its
+success depends on the port support for this operation, as advertised through
+the port capability set. This function is valid for all nodes of the traffic
+management hierarchy except root node.
+
+Commit port traffic management hierarchy
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Commit the traffic management hierarchy on the port::
+
+ testpmd> port tm hierarchy commit (port_id) (clean_on_fail)
+
+where:
+
+* ``clean_on_fail``: When set to non-zero, hierarchy is cleared on function
+ call failure. On the other hand, hierarchy is preserved when this parameter
+ is equal to zero.
+
+Set port traffic management default hierarchy (tm forwarding mode)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+set the traffic management default hierarchy on the port::
+
+ testpmd> set port tm hierarchy default (port_id)
Filter Functions
----------------
---------------------
Control of the generic flow API (*rte_flow*) is fully exposed through the
-``flow`` command (validation, creation, destruction and queries).
+``flow`` command (validation, creation, destruction, queries and operation
+modes).
Considering *rte_flow* overlaps with all `Filter Functions`_, using both
features simultaneously may cause undefined side-effects and is therefore
flow list {port_id} [group {group_id}] [...]
+- Restrict ingress traffic to the defined flow rules::
+
+ flow isolate {port_id} {boolean}
+
Validating flow rules
~~~~~~~~~~~~~~~~~~~~~
- ``protocol {unsigned}``: protocol type.
+- ``fuzzy``: fuzzy pattern match, expect faster than default.
+
+ - ``thresh {unsigned}``: accuracy threshold.
+
+- ``gtp``, ``gtpc``, ``gtpu``: match GTPv1 header.
+
+ - ``teid {unsigned}``: tunnel endpoint identifier.
+
Actions list
^^^^^^^^^^^^
7 63 0 i- ETH IPV6 UDP VXLAN => MARK QUEUE
testpmd>
+Toggling isolated mode
+~~~~~~~~~~~~~~~~~~~~~~
+
+``flow isolate`` can be used to tell the underlying PMD that ingress traffic
+must only be injected from the defined flow rules; that no default traffic
+is expected outside those rules and the driver is free to assign more
+resources to handle them. It is bound to ``rte_flow_isolate()``::
+
+ flow isolate {port_id} {boolean}
+
+If successful, enabling or disabling isolated mode shows either::
+
+ Ingress traffic on port [...]
+ is now restricted to the defined flow rules
+
+Or::
+
+ Ingress traffic on port [...]
+ is not restricted anymore to the defined flow rules
+
+Otherwise, in case of error::
+
+ Caught error type [...] ([...]): [...]
+
+Mainly due to its side effects, PMDs supporting this mode may not have the
+ability to toggle it more than once without reinitializing affected ports
+first (e.g. by exiting testpmd).
+
+Enabling isolated mode::
+
+ testpmd> flow isolate 0 true
+ Ingress traffic on port 0 is now restricted to the defined flow rules
+ testpmd>
+
+Disabling isolated mode::
+
+ testpmd> flow isolate 0 false
+ Ingress traffic on port 0 is not restricted anymore to the defined flow rules
+ testpmd>
+
Sample QinQ flow rules
~~~~~~~~~~~~~~~~~~~~~~
ID Group Prio Attr Rule
0 0 0 i- ETH VLAN VLAN=>VF QUEUE
1 0 0 i- ETH VLAN VLAN=>PF QUEUE
-
git.droids-corp.org / dpdk.git / blobdiff