/* SPDX-License-Identifier: BSD-3-Clause
*
- * Copyright 2017 NXP
+ * Copyright 2017-2019 NXP
*
*/
/* System headers */
#include <rte_bus.h>
#include <rte_mbuf_pool_ops.h>
+#include <dpaa_of.h>
#include <rte_dpaa_bus.h>
#include <rte_dpaa_logs.h>
#include <dpaax_iova_table.h>
#include <fsl_usd.h>
#include <fsl_qman.h>
#include <fsl_bman.h>
-#include <of.h>
#include <netcfg.h>
int dpaa_logtype_bus;
* allocated for dev->name/
*/
memset(dev->name, 0, RTE_ETH_NAME_MAX_LEN);
- sprintf(dev->name, "dpaa-sec%d", i);
+ sprintf(dev->name, "dpaa_sec-%d", i+1);
DPAA_BUS_LOG(INFO, "%s cryptodev added", dev->name);
dev->device.name = dev->name;
dev->device.devargs = dpaa_devargs_lookup(dev);
int rte_dpaa_portal_init(void *arg)
{
- cpu_set_t cpuset;
- pthread_t id;
- uint32_t cpu = rte_lcore_id();
+ unsigned int cpu, lcore = rte_lcore_id();
int ret;
struct dpaa_portal *dpaa_io_portal;
BUS_INIT_FUNC_TRACE();
- if ((size_t)arg == 1 || cpu == LCORE_ID_ANY)
- cpu = rte_get_master_lcore();
- /* if the core id is not supported */
+ if ((size_t)arg == 1 || lcore == LCORE_ID_ANY)
+ lcore = rte_get_master_lcore();
else
- if (cpu >= RTE_MAX_LCORE)
+ if (lcore >= RTE_MAX_LCORE)
return -1;
- /* Set CPU affinity for this thread */
- CPU_ZERO(&cpuset);
- CPU_SET(cpu, &cpuset);
- id = pthread_self();
- ret = pthread_setaffinity_np(id, sizeof(cpu_set_t), &cpuset);
- if (ret) {
- DPAA_BUS_LOG(ERR, "pthread_setaffinity_np failed on "
- "core :%d with ret: %d", cpu, ret);
- return ret;
- }
+ cpu = rte_lcore_to_cpu_id(lcore);
/* Initialise bman thread portals */
ret = bman_thread_init();
if (ret) {
- DPAA_BUS_LOG(ERR, "bman_thread_init failed on "
- "core %d with ret: %d", cpu, ret);
+ DPAA_BUS_LOG(ERR, "bman_thread_init failed on core %u"
+ " (lcore=%u) with ret: %d", cpu, lcore, ret);
return ret;
}
- DPAA_BUS_LOG(DEBUG, "BMAN thread initialized");
+ DPAA_BUS_LOG(DEBUG, "BMAN thread initialized - CPU=%d lcore=%d",
+ cpu, lcore);
/* Initialise qman thread portals */
ret = qman_thread_init();
if (ret) {
- DPAA_BUS_LOG(ERR, "bman_thread_init failed on "
- "core %d with ret: %d", cpu, ret);
+ DPAA_BUS_LOG(ERR, "qman_thread_init failed on core %u"
+ " (lcore=%u) with ret: %d", cpu, lcore, ret);
bman_thread_finish();
return ret;
}
- DPAA_BUS_LOG(DEBUG, "QMAN thread initialized");
+ DPAA_BUS_LOG(DEBUG, "QMAN thread initialized - CPU=%d lcore=%d",
+ cpu, lcore);
dpaa_io_portal = rte_malloc(NULL, sizeof(struct dpaa_portal),
RTE_CACHE_LINE_SIZE);
ret = pthread_setspecific(dpaa_portal_key, (void *)dpaa_io_portal);
if (ret) {
- DPAA_BUS_LOG(ERR, "pthread_setspecific failed on "
- "core %d with ret: %d", cpu, ret);
+ DPAA_BUS_LOG(ERR, "pthread_setspecific failed on core %u"
+ " (lcore=%u) with ret: %d", cpu, lcore, ret);
dpaa_portal_finish(NULL);
return ret;
{
/* Affine above created portal with channel*/
u32 sdqcr;
- struct qman_portal *qp;
int ret;
if (unlikely(!RTE_PER_LCORE(dpaa_io))) {
}
/* Initialise qman specific portals */
- qp = fsl_qman_portal_create();
- if (!qp) {
- DPAA_BUS_LOG(ERR, "Unable to alloc fq portal");
+ ret = fsl_qman_fq_portal_init(fq->qp);
+ if (ret) {
+ DPAA_BUS_LOG(ERR, "Unable to init fq portal");
return -1;
}
- fq->qp = qp;
+
sdqcr = QM_SDQCR_CHANNELS_POOL_CONV(fq->ch_id);
- qman_static_dequeue_add(sdqcr, qp);
+ qman_static_dequeue_add(sdqcr, fq->qp);
return 0;
}
int rte_dpaa_portal_fq_close(struct qman_fq *fq)
{
- return fsl_qman_portal_destroy(fq->qp);
+ return fsl_qman_fq_portal_destroy(fq->qp);
}
void
{
int i, j;
int max_fman = 2, max_macs = 16;
- char *sep = strchr(name, ':');
-
- if (strncmp(name, RTE_STR(FSL_DPAA_BUS_NAME),
- strlen(RTE_STR(FSL_DPAA_BUS_NAME)))) {
- return -EINVAL;
- }
-
- if (!sep) {
- DPAA_BUS_ERR("Incorrect device name observed");
- return -EINVAL;
- }
+ char *dup_name;
+ char *sep = NULL;
- sep = (char *) (sep + 1);
+ /* There are two ways of passing device name, with and without
+ * separator. "dpaa_bus:fm1-mac3" with separator, and "fm1-mac3"
+ * without separator. Both need to be handled.
+ * It is also possible that "name=fm1-mac3" is passed along.
+ */
+ DPAA_BUS_DEBUG("Parse device name (%s)", name);
+
+ /* Check for dpaa_bus:fm1-mac3 style */
+ dup_name = strdup(name);
+ sep = strchr(dup_name, ':');
+ if (!sep)
+ /* If not, check for name=fm1-mac3 style */
+ sep = strchr(dup_name, '=');
+
+ if (sep)
+ /* jump over the seprator */
+ sep = (char *) (sep + 1);
+ else
+ sep = dup_name;
for (i = 0; i < max_fman; i++) {
for (j = 0; j < max_macs; j++) {
if (strcmp(fm_name, sep) == 0) {
if (out_name)
strcpy(out_name, sep);
+ free(dup_name);
return 0;
}
}
for (i = 0; i < RTE_LIBRTE_DPAA_MAX_CRYPTODEV; i++) {
char sec_name[16];
- snprintf(sec_name, 16, "dpaa-sec%d", i);
+ snprintf(sec_name, 16, "dpaa_sec-%d", i+1);
if (strcmp(sec_name, sep) == 0) {
if (out_name)
strcpy(out_name, sep);
+ free(dup_name);
return 0;
}
}
+ free(dup_name);
return -EINVAL;
}
return 0;
}
- /* Load the device-tree driver */
- ret = of_init();
- if (ret) {
- DPAA_BUS_LOG(ERR, "of_init failed with ret: %d", ret);
- return -1;
- }
-
- /* Get the interface configurations from device-tree */
- dpaa_netcfg = netcfg_acquire();
- if (!dpaa_netcfg) {
- DPAA_BUS_LOG(ERR, "netcfg_acquire failed");
- return -EINVAL;
- }
-
- RTE_LOG(NOTICE, EAL, "DPAA Bus Detected\n");
-
- if (!dpaa_netcfg->num_ethports) {
- DPAA_BUS_LOG(INFO, "no network interfaces available");
- /* This is not an error */
+ if (rte_dpaa_bus.detected)
return 0;
- }
-
-#ifdef RTE_LIBRTE_DPAA_DEBUG_DRIVER
- dump_netcfg(dpaa_netcfg);
-#endif
- DPAA_BUS_LOG(DEBUG, "Number of ethernet devices = %d",
- dpaa_netcfg->num_ethports);
- ret = dpaa_create_device_list();
- if (ret) {
- DPAA_BUS_LOG(ERR, "Unable to create device list. (%d)", ret);
- return ret;
- }
+ rte_dpaa_bus.detected = 1;
/* create the key, supplying a function that'll be invoked
* when a portal affined thread will be deleted.
return -1;
}
+static int
+rte_dpaa_bus_dev_build(void)
+{
+ int ret;
+
+ /* Load the device-tree driver */
+ ret = of_init();
+ if (ret) {
+ DPAA_BUS_LOG(ERR, "of_init failed with ret: %d", ret);
+ return -1;
+ }
+
+ /* Get the interface configurations from device-tree */
+ dpaa_netcfg = netcfg_acquire();
+ if (!dpaa_netcfg) {
+ DPAA_BUS_LOG(ERR, "netcfg_acquire failed");
+ return -EINVAL;
+ }
+
+ RTE_LOG(NOTICE, EAL, "DPAA Bus Detected\n");
+
+ if (!dpaa_netcfg->num_ethports) {
+ DPAA_BUS_LOG(INFO, "no network interfaces available");
+ /* This is not an error */
+ return 0;
+ }
+
+#ifdef RTE_LIBRTE_DPAA_DEBUG_DRIVER
+ dump_netcfg(dpaa_netcfg);
+#endif
+
+ DPAA_BUS_LOG(DEBUG, "Number of ethernet devices = %d",
+ dpaa_netcfg->num_ethports);
+ ret = dpaa_create_device_list();
+ if (ret) {
+ DPAA_BUS_LOG(ERR, "Unable to create device list. (%d)", ret);
+ return ret;
+ }
+ return 0;
+}
+
static int
rte_dpaa_bus_probe(void)
{
FILE *svr_file = NULL;
unsigned int svr_ver;
int probe_all = rte_dpaa_bus.bus.conf.scan_mode != RTE_BUS_SCAN_WHITELIST;
+ static int process_once;
+
+ /* If DPAA bus is not present nothing needs to be done */
+ if (!rte_dpaa_bus.detected)
+ return 0;
+
+ /* Device list creation is only done once */
+ if (!process_once) {
+ rte_dpaa_bus_dev_build();
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ /* One time load of Qman/Bman drivers */
+ ret = qman_global_init();
+ if (ret) {
+ DPAA_PMD_ERR("QMAN initialization failed: %d",
+ ret);
+ return ret;
+ }
+ ret = bman_global_init();
+ if (ret) {
+ DPAA_PMD_ERR("BMAN initialization failed: %d",
+ ret);
+ return ret;
+ }
+ }
+ }
+ process_once = 1;
+
+ /* If no device present on DPAA bus nothing needs to be done */
+ if (TAILQ_EMPTY(&rte_dpaa_bus.device_list))
+ return 0;
svr_file = fopen(DPAA_SOC_ID_FILE, "r");
if (svr_file) {
RTE_DEV_WHITELISTED)) {
ret = drv->probe(drv, dev);
if (ret) {
- DPAA_BUS_ERR("Unable to probe.\n");
+ DPAA_BUS_ERR("unable to probe:%s",
+ dev->name);
} else {
dev->driver = drv;
dev->device.driver = &drv->driver;
/* Register DPAA mempool ops only if any DPAA device has
* been detected.
*/
- if (!TAILQ_EMPTY(&rte_dpaa_bus.device_list))
- rte_mbuf_set_platform_mempool_ops(DPAA_MEMPOOL_OPS_NAME);
+ rte_mbuf_set_platform_mempool_ops(DPAA_MEMPOOL_OPS_NAME);
return 0;
}
const void *data)
{
struct rte_dpaa_device *dev;
+ const struct rte_dpaa_device *dstart;
- TAILQ_FOREACH(dev, &rte_dpaa_bus.device_list, next) {
- if (start && &dev->device == start) {
- start = NULL; /* starting point found */
- continue;
- }
+ /* find_device is called with 'data' as an opaque object - just call
+ * cmp with this and each device object on bus.
+ */
+
+ if (start != NULL) {
+ dstart = RTE_DEV_TO_DPAA_CONST(start);
+ dev = TAILQ_NEXT(dstart, next);
+ } else {
+ dev = TAILQ_FIRST(&rte_dpaa_bus.device_list);
+ }
- if (cmp(&dev->device, data) == 0)
+ while (dev != NULL) {
+ if (cmp(&dev->device, data) == 0) {
+ DPAA_BUS_DEBUG("Found dev=(%s)\n", dev->device.name);
return &dev->device;
+ }
+ dev = TAILQ_NEXT(dev, next);
}
+ DPAA_BUS_DEBUG("Unable to find any device\n");
return NULL;
}
return RTE_IOVA_PA;
}
+static int
+dpaa_bus_plug(struct rte_device *dev __rte_unused)
+{
+ /* No operation is performed while plugging the device */
+ return 0;
+}
+
+static int
+dpaa_bus_unplug(struct rte_device *dev __rte_unused)
+{
+ /* No operation is performed while unplugging the device */
+ return 0;
+}
+
+static void *
+dpaa_bus_dev_iterate(const void *start, const char *str,
+ const struct rte_dev_iterator *it __rte_unused)
+{
+ const struct rte_dpaa_device *dstart;
+ struct rte_dpaa_device *dev;
+ char *dup, *dev_name = NULL;
+
+ /* Expectation is that device would be name=device_name */
+ if (strncmp(str, "name=", 5) != 0) {
+ DPAA_BUS_DEBUG("Invalid device string (%s)\n", str);
+ return NULL;
+ }
+
+ /* Now that name=device_name format is available, split */
+ dup = strdup(str);
+ dev_name = dup + strlen("name=");
+
+ if (start != NULL) {
+ dstart = RTE_DEV_TO_DPAA_CONST(start);
+ dev = TAILQ_NEXT(dstart, next);
+ } else {
+ dev = TAILQ_FIRST(&rte_dpaa_bus.device_list);
+ }
+
+ while (dev != NULL) {
+ if (strcmp(dev->device.name, dev_name) == 0) {
+ free(dup);
+ return &dev->device;
+ }
+ dev = TAILQ_NEXT(dev, next);
+ }
+
+ free(dup);
+ return NULL;
+}
+
static struct rte_dpaa_bus rte_dpaa_bus = {
.bus = {
.scan = rte_dpaa_bus_scan,
.parse = rte_dpaa_bus_parse,
.find_device = rte_dpaa_find_device,
.get_iommu_class = rte_dpaa_get_iommu_class,
+ .plug = dpaa_bus_plug,
+ .unplug = dpaa_bus_unplug,
+ .dev_iterate = dpaa_bus_dev_iterate,
},
.device_list = TAILQ_HEAD_INITIALIZER(rte_dpaa_bus.device_list),
.driver_list = TAILQ_HEAD_INITIALIZER(rte_dpaa_bus.driver_list),
git.droids-corp.org / dpdk.git / blobdiff