#include <string.h>
#include <inttypes.h>
#include <stdint.h>
+#include <stdbool.h>
#include <stdlib.h>
#include <stdio.h>
#include <sys/queue.h>
#include <rte_string_fns.h>
#include <rte_common.h>
#include <rte_devargs.h>
+#include <rte_vfio.h>
#include "private.h"
-extern struct rte_pci_bus rte_pci_bus;
#define SYSFS_PCI_DEVICES "/sys/bus/pci/devices"
*/
if (devargs != NULL)
/* If an rte_devargs exists, the generic rte_device uses the
- * given name as its namea
+ * given name as its name.
*/
dev->device.name = dev->device.devargs->name;
else
struct rte_pci_device *dev)
{
int ret;
+ bool already_probed;
struct rte_pci_addr *loc;
if ((dr == NULL) || (dev == NULL))
dev->device.numa_node = 0;
}
+ already_probed = rte_dev_is_probed(&dev->device);
+ if (already_probed && !(dr->drv_flags & RTE_PCI_DRV_PROBE_AGAIN)) {
+ RTE_LOG(DEBUG, EAL, "Device %s is already probed\n",
+ dev->device.name);
+ return -EEXIST;
+ }
+
RTE_LOG(INFO, EAL, " probe driver: %x:%x %s\n", dev->id.vendor_id,
dev->id.device_id, dr->driver.name);
- if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) {
+ /*
+ * reference driver structure
+ * This needs to be before rte_pci_map_device(), as it enables to use
+ * driver flags for adjusting configuration.
+ */
+ if (!already_probed)
+ dev->driver = dr;
+
+ if (!already_probed && (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING)) {
/* map resources for devices that use igb_uio */
ret = rte_pci_map_device(dev);
- if (ret != 0)
+ if (ret != 0) {
+ dev->driver = NULL;
return ret;
+ }
}
- /* reference driver structure */
- dev->driver = dr;
- dev->device.driver = &dr->driver;
-
/* call the driver probe() function */
ret = dr->probe(dr, dev);
+ if (already_probed)
+ return ret; /* no rollback if already succeeded earlier */
if (ret) {
dev->driver = NULL;
- dev->device.driver = NULL;
if ((dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) &&
/* Don't unmap if device is unsupported and
* driver needs mapped resources.
!(ret > 0 &&
(dr->drv_flags & RTE_PCI_DRV_KEEP_MAPPED_RES)))
rte_pci_unmap_device(dev);
+ } else {
+ dev->device.driver = &dr->driver;
}
return ret;
if (dev == NULL)
return -1;
- /* Check if a driver is already loaded */
- if (dev->driver != NULL)
- return 0;
-
FOREACH_DRIVER_ON_PCIBUS(dr) {
rc = rte_pci_probe_one_driver(dr, dev);
if (rc < 0)
return 1;
}
-/*
- * Find the pci device specified by pci address, then invoke probe function of
- * the driver of the device.
- */
-int
-rte_pci_probe_one(const struct rte_pci_addr *addr)
-{
- struct rte_pci_device *dev = NULL;
-
- int ret = 0;
-
- if (addr == NULL)
- return -1;
-
- /* update current pci device in global list, kernel bindings might have
- * changed since last time we looked at it.
- */
- if (pci_update_device(addr) < 0)
- goto err_return;
-
- FOREACH_DEVICE_ON_PCIBUS(dev) {
- if (rte_pci_addr_cmp(&dev->addr, addr))
- continue;
-
- ret = pci_probe_all_drivers(dev);
- if (ret)
- goto err_return;
- return 0;
- }
- return -1;
-
-err_return:
- RTE_LOG(WARNING, EAL,
- "Requested device " PCI_PRI_FMT " cannot be used\n",
- addr->domain, addr->bus, addr->devid, addr->function);
- return -1;
-}
-
-/*
- * Detach device specified by its pci address.
- */
-int
-rte_pci_detach(const struct rte_pci_addr *addr)
-{
- struct rte_pci_device *dev = NULL;
- int ret = 0;
-
- if (addr == NULL)
- return -1;
-
- FOREACH_DEVICE_ON_PCIBUS(dev) {
- if (rte_pci_addr_cmp(&dev->addr, addr))
- continue;
-
- ret = rte_pci_detach_dev(dev);
- if (ret < 0)
- /* negative value is an error */
- goto err_return;
- if (ret > 0)
- /* positive value means driver doesn't support it */
- continue;
-
- rte_pci_remove_device(dev);
- free(dev);
- return 0;
- }
- return -1;
-
-err_return:
- RTE_LOG(WARNING, EAL, "Requested device " PCI_PRI_FMT
- " cannot be used\n", dev->addr.domain, dev->addr.bus,
- dev->addr.devid, dev->addr.function);
- return -1;
-}
-
/*
* Scan the content of the PCI bus, and call the probe() function for
* all registered drivers that have a matching entry in its id_table
devargs->policy == RTE_DEV_WHITELISTED)
ret = pci_probe_all_drivers(dev);
if (ret < 0) {
- RTE_LOG(ERR, EAL, "Requested device " PCI_PRI_FMT
- " cannot be used\n", dev->addr.domain, dev->addr.bus,
- dev->addr.devid, dev->addr.function);
- rte_errno = errno;
- failed++;
+ if (ret != -EEXIST) {
+ RTE_LOG(ERR, EAL, "Requested device "
+ PCI_PRI_FMT " cannot be used\n",
+ dev->addr.domain, dev->addr.bus,
+ dev->addr.devid, dev->addr.function);
+ rte_errno = errno;
+ failed++;
+ }
ret = 0;
}
}
}
/* Remove a device from PCI bus */
-void
+static void
rte_pci_remove_device(struct rte_pci_device *pci_dev)
{
TAILQ_REMOVE(&rte_pci_bus.device_list, pci_dev, next);
pci_find_device(const struct rte_device *start, rte_dev_cmp_t cmp,
const void *data)
{
- struct rte_pci_device *dev;
+ const struct rte_pci_device *pstart;
+ struct rte_pci_device *pdev;
- FOREACH_DEVICE_ON_PCIBUS(dev) {
- if (start && &dev->device == start) {
- start = NULL; /* starting point found */
- continue;
- }
- if (cmp(&dev->device, data) == 0)
- return &dev->device;
+ if (start != NULL) {
+ pstart = RTE_DEV_TO_PCI_CONST(start);
+ pdev = TAILQ_NEXT(pstart, next);
+ } else {
+ pdev = TAILQ_FIRST(&rte_pci_bus.device_list);
}
+ while (pdev != NULL) {
+ if (cmp(&pdev->device, data) == 0)
+ return &pdev->device;
+ pdev = TAILQ_NEXT(pdev, next);
+ }
+ return NULL;
+}
+/*
+ * find the device which encounter the failure, by iterate over all device on
+ * PCI bus to check if the memory failure address is located in the range
+ * of the BARs of the device.
+ */
+static struct rte_pci_device *
+pci_find_device_by_addr(const void *failure_addr)
+{
+ struct rte_pci_device *pdev = NULL;
+ uint64_t check_point, start, end, len;
+ int i;
+
+ check_point = (uint64_t)(uintptr_t)failure_addr;
+
+ FOREACH_DEVICE_ON_PCIBUS(pdev) {
+ for (i = 0; i != RTE_DIM(pdev->mem_resource); i++) {
+ start = (uint64_t)(uintptr_t)pdev->mem_resource[i].addr;
+ len = pdev->mem_resource[i].len;
+ end = start + len;
+ if (check_point >= start && check_point < end) {
+ RTE_LOG(DEBUG, EAL, "Failure address %16.16"
+ PRIx64" belongs to device %s!\n",
+ check_point, pdev->device.name);
+ return pdev;
+ }
+ }
+ }
return NULL;
}
+static int
+pci_hot_unplug_handler(struct rte_device *dev)
+{
+ struct rte_pci_device *pdev = NULL;
+ int ret = 0;
+
+ pdev = RTE_DEV_TO_PCI(dev);
+ if (!pdev)
+ return -1;
+
+ switch (pdev->kdrv) {
+#ifdef HAVE_VFIO_DEV_REQ_INTERFACE
+ case RTE_KDRV_VFIO:
+ /*
+ * vfio kernel module guaranty the pci device would not be
+ * deleted until the user space release the resource, so no
+ * need to remap BARs resource here, just directly notify
+ * the req event to the user space to handle it.
+ */
+ rte_dev_event_callback_process(dev->name,
+ RTE_DEV_EVENT_REMOVE);
+ break;
+#endif
+ case RTE_KDRV_IGB_UIO:
+ case RTE_KDRV_UIO_GENERIC:
+ case RTE_KDRV_NIC_UIO:
+ /* BARs resource is invalid, remap it to be safe. */
+ ret = pci_uio_remap_resource(pdev);
+ break;
+ default:
+ RTE_LOG(DEBUG, EAL,
+ "Not managed by a supported kernel driver, skipped\n");
+ ret = -1;
+ break;
+ }
+
+ return ret;
+}
+
+static int
+pci_sigbus_handler(const void *failure_addr)
+{
+ struct rte_pci_device *pdev = NULL;
+ int ret = 0;
+
+ pdev = pci_find_device_by_addr(failure_addr);
+ if (!pdev) {
+ /* It is a generic sigbus error, no bus would handle it. */
+ ret = 1;
+ } else {
+ /* The sigbus error is caused of hot-unplug. */
+ ret = pci_hot_unplug_handler(&pdev->device);
+ if (ret) {
+ RTE_LOG(ERR, EAL,
+ "Failed to handle hot-unplug for device %s",
+ pdev->name);
+ ret = -1;
+ }
+ }
+ return ret;
+}
+
static int
pci_plug(struct rte_device *dev)
{
ret = rte_pci_detach_dev(pdev);
if (ret == 0) {
rte_pci_remove_device(pdev);
+ rte_devargs_remove(dev->devargs);
free(pdev);
}
return ret;
.unplug = pci_unplug,
.parse = pci_parse,
.get_iommu_class = rte_pci_get_iommu_class,
+ .dev_iterate = rte_pci_dev_iterate,
+ .hot_unplug_handler = pci_hot_unplug_handler,
+ .sigbus_handler = pci_sigbus_handler,
},
.device_list = TAILQ_HEAD_INITIALIZER(rte_pci_bus.device_list),
.driver_list = TAILQ_HEAD_INITIALIZER(rte_pci_bus.driver_list),
git.droids-corp.org / dpdk.git / blobdiff