crypto/aesni_mb: add dynamic logging

[dpdk.git] / drivers / crypto / aesni_mb / rte_aesni_mb_pmd.c

diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
index bb35c66..9ae2b54 100644 (file)
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
@@ -108,7 +108,7 @@ aesni_mb_set_session_auth_parameters(const struct aesni_mb_op_fns *mb_ops,
        }
 
        if (xform->type != RTE_CRYPTO_SYM_XFORM_AUTH) {
-               MB_LOG_ERR("Crypto xform struct not of type auth");
+               AESNI_MB_LOG(ERR, "Crypto xform struct not of type auth");
                return -1;
        }
 
@@ -161,7 +161,7 @@ aesni_mb_set_session_auth_parameters(const struct aesni_mb_op_fns *mb_ops,
                hash_oneblock_fn = mb_ops->aux.one_block.sha512;
                break;
        default:
-               MB_LOG_ERR("Unsupported authentication algorithm selection");
+               AESNI_MB_LOG(ERR, "Unsupported authentication algorithm selection");
                return -ENOTSUP;
        }
 
@@ -190,7 +190,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
        }
 
        if (xform->type != RTE_CRYPTO_SYM_XFORM_CIPHER) {
-               MB_LOG_ERR("Crypto xform struct not of type cipher");
+               AESNI_MB_LOG(ERR, "Crypto xform struct not of type cipher");
                return -EINVAL;
        }
 
@@ -203,7 +203,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
                sess->cipher.direction = DECRYPT;
                break;
        default:
-               MB_LOG_ERR("Invalid cipher operation parameter");
+               AESNI_MB_LOG(ERR, "Invalid cipher operation parameter");
                return -EINVAL;
        }
 
@@ -228,7 +228,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
                sess->cipher.mode = DOCSIS_DES;
                break;
        default:
-               MB_LOG_ERR("Unsupported cipher mode parameter");
+               AESNI_MB_LOG(ERR, "Unsupported cipher mode parameter");
                return -ENOTSUP;
        }
 
@@ -252,7 +252,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
                        aes_keyexp_fn = mb_ops->aux.keyexp.aes256;
                        break;
                default:
-                       MB_LOG_ERR("Invalid cipher key length");
+                       AESNI_MB_LOG(ERR, "Invalid cipher key length");
                        return -EINVAL;
                }
 
@@ -263,7 +263,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
 
        } else {
                if (xform->cipher.key.length != 8) {
-                       MB_LOG_ERR("Invalid cipher key length");
+                       AESNI_MB_LOG(ERR, "Invalid cipher key length");
                        return -EINVAL;
                }
                sess->cipher.key_length_in_bytes = 8;
@@ -294,7 +294,7 @@ aesni_mb_set_session_aead_parameters(const struct aesni_mb_op_fns *mb_ops,
                sess->auth.operation = RTE_CRYPTO_AUTH_OP_VERIFY;
                break;
        default:
-               MB_LOG_ERR("Invalid aead operation parameter");
+               AESNI_MB_LOG(ERR, "Invalid aead operation parameter");
                return -EINVAL;
        }
 
@@ -304,7 +304,7 @@ aesni_mb_set_session_aead_parameters(const struct aesni_mb_op_fns *mb_ops,
                sess->auth.algo = AES_CCM;
                break;
        default:
-               MB_LOG_ERR("Unsupported aead mode parameter");
+               AESNI_MB_LOG(ERR, "Unsupported aead mode parameter");
                return -ENOTSUP;
        }
 
@@ -320,7 +320,7 @@ aesni_mb_set_session_aead_parameters(const struct aesni_mb_op_fns *mb_ops,
                aes_keyexp_fn = mb_ops->aux.keyexp.aes128;
                break;
        default:
-               MB_LOG_ERR("Invalid cipher key length");
+               AESNI_MB_LOG(ERR, "Invalid cipher key length");
                return -EINVAL;
        }
 
@@ -391,7 +391,7 @@ aesni_mb_set_session_parameters(const struct aesni_mb_op_fns *mb_ops,
                break;
        case AESNI_MB_OP_NOT_SUPPORTED:
        default:
-               MB_LOG_ERR("Unsupported operation chain order parameter");
+               AESNI_MB_LOG(ERR, "Unsupported operation chain order parameter");
                return -ENOTSUP;
        }
 
@@ -400,14 +400,14 @@ aesni_mb_set_session_parameters(const struct aesni_mb_op_fns *mb_ops,
 
        ret = aesni_mb_set_session_auth_parameters(mb_ops, sess, auth_xform);
        if (ret != 0) {
-               MB_LOG_ERR("Invalid/unsupported authentication parameters");
+               AESNI_MB_LOG(ERR, "Invalid/unsupported authentication parameters");
                return ret;
        }
 
        ret = aesni_mb_set_session_cipher_parameters(mb_ops, sess,
                        cipher_xform);
        if (ret != 0) {
-               MB_LOG_ERR("Invalid/unsupported cipher parameters");
+               AESNI_MB_LOG(ERR, "Invalid/unsupported cipher parameters");
                return ret;
        }
 
@@ -415,7 +415,7 @@ aesni_mb_set_session_parameters(const struct aesni_mb_op_fns *mb_ops,
                ret = aesni_mb_set_session_aead_parameters(mb_ops, sess,
                                aead_xform);
                if (ret != 0) {
-                       MB_LOG_ERR("Invalid/unsupported aead parameters");
+                       AESNI_MB_LOG(ERR, "Invalid/unsupported aead parameters");
                        return ret;
                }
        }
@@ -555,7 +555,7 @@ set_mb_job_params(JOB_AES_HMAC *job, struct aesni_mb_qp *qp,
                char *odata = rte_pktmbuf_append(m_dst,
                                rte_pktmbuf_data_len(op->sym->m_src));
                if (odata == NULL) {
-                       MB_LOG_ERR("failed to allocate space in destination "
+                       AESNI_MB_LOG(ERR, "failed to allocate space in destination "
                                        "mbuf for source data");
                        op->status = RTE_CRYPTO_OP_STATUS_ERROR;
                        return -1;
@@ -832,13 +832,13 @@ cryptodev_aesni_mb_create(const char *name,
 
        /* Check CPU for support for AES instruction set */
        if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_AES)) {
-               MB_LOG_ERR("AES instructions not supported by CPU");
+               AESNI_MB_LOG(ERR, "AES instructions not supported by CPU");
                return -EFAULT;
        }
 
        dev = rte_cryptodev_pmd_create(name, &vdev->device, init_params);
        if (dev == NULL) {
-               MB_LOG_ERR("failed to create cryptodev vdev");
+               AESNI_MB_LOG(ERR, "failed to create cryptodev vdev");
                return -ENODEV;
        }
 
@@ -911,7 +911,7 @@ cryptodev_aesni_mb_probe(struct rte_vdev_device *vdev)
 
        retval = rte_cryptodev_pmd_parse_input_args(&init_params, args);
        if (retval) {
-               MB_LOG_ERR("Failed to parse initialisation arguments[%s]\n",
+               AESNI_MB_LOG(ERR, "Failed to parse initialisation arguments[%s]",
                                args);
                return -EINVAL;
        }
@@ -952,3 +952,10 @@ RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_AESNI_MB_PMD,
 RTE_PMD_REGISTER_CRYPTO_DRIVER(aesni_mb_crypto_drv,
                cryptodev_aesni_mb_pmd_drv.driver,
                cryptodev_driver_id);
+
+RTE_INIT(aesni_mb_init_log);
+static void
+aesni_mb_init_log(void)
+{
+       aesni_mb_logtype_driver = rte_log_register("pmd.crypto.aesni_mb");
+}