net/bnxt: add Rx queue create/destroy

[dpdk.git] / drivers / net / bnxt / hsi_struct_def_dpdk.h

diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index ca42a87..bbec5bb 100644 (file)
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -1897,6 +1897,127 @@ struct hwrm_queue_qportcfg_input {
        uint16_t unused_0;
 } __attribute__((packed));
 
+/* hwrm_vnic_rss_cfg */
+/* Description: This function is used to enable RSS configuration. */
+
+/* Input (48 bytes) */
+struct hwrm_vnic_rss_cfg_input {
+       /*
+        * This value indicates what type of request this is. The format for the
+        * rest of the command is determined by this field.
+        */
+       uint16_t req_type;
+
+       /*
+        * This value indicates the what completion ring the request will be
+        * optionally completed on. If the value is -1, then no CR completion
+        * will be generated. Any other value must be a valid CR ring_id value
+        * for this function.
+        */
+       uint16_t cmpl_ring;
+
+       /* This value indicates the command sequence number. */
+       uint16_t seq_id;
+
+       /*
+        * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+        * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+        */
+       uint16_t target_id;
+
+       /*
+        * This is the host address where the response will be written when the
+        * request is complete. This area must be 16B aligned and must be
+        * cleared to zero before the request is made.
+        */
+       uint64_t resp_addr;
+
+       /*
+        * When this bit is '1', the RSS hash shall be computed over source and
+        * destination IPv4 addresses of IPv4 packets.
+        */
+       #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4          UINT32_C(0x1)
+       /*
+        * When this bit is '1', the RSS hash shall be computed over
+        * source/destination IPv4 addresses and source/destination ports of
+        * TCP/IPv4 packets.
+        */
+       #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4      UINT32_C(0x2)
+       /*
+        * When this bit is '1', the RSS hash shall be computed over
+        * source/destination IPv4 addresses and source/destination ports of
+        * UDP/IPv4 packets.
+        */
+       #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4      UINT32_C(0x4)
+       /*
+        * When this bit is '1', the RSS hash shall be computed over source and
+        * destination IPv4 addresses of IPv6 packets.
+        */
+       #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6          UINT32_C(0x8)
+       /*
+        * When this bit is '1', the RSS hash shall be computed over
+        * source/destination IPv6 addresses and source/destination ports of
+        * TCP/IPv6 packets.
+        */
+       #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6      UINT32_C(0x10)
+       /*
+        * When this bit is '1', the RSS hash shall be computed over
+        * source/destination IPv6 addresses and source/destination ports of
+        * UDP/IPv6 packets.
+        */
+       #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6      UINT32_C(0x20)
+       uint32_t hash_type;
+
+       uint32_t unused_0;
+
+       /* This is the address for rss ring group table */
+       uint64_t ring_grp_tbl_addr;
+
+       /* This is the address for rss hash key table */
+       uint64_t hash_key_tbl_addr;
+
+       /* Index to the rss indirection table. */
+       uint16_t rss_ctx_idx;
+
+       uint16_t unused_1[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_vnic_rss_cfg_output {
+       /*
+        * Pass/Fail or error type Note: receiver to verify the in parameters,
+        * and fail the call with an error when appropriate
+        */
+       uint16_t error_code;
+
+       /* This field returns the type of original request. */
+       uint16_t req_type;
+
+       /* This field provides original sequence number of the command. */
+       uint16_t seq_id;
+
+       /*
+        * This field is the length of the response in bytes. The last byte of
+        * the response is a valid flag that will read as '1' when the command
+        * has been completely written to memory.
+        */
+       uint16_t resp_len;
+
+       uint32_t unused_0;
+       uint8_t unused_1;
+       uint8_t unused_2;
+       uint8_t unused_3;
+
+       /*
+        * This field is used in Output records to indicate that the output is
+        * completely written to RAM. This field should be read as '1' to
+        * indicate that the output has been completely written. When writing a
+        * command completion or response to an internal processor, the order of
+        * writes has to be such that this field is written last.
+        */
+       uint8_t valid;
+} __attribute__((packed));
+
 /* Output (32 bytes) */
 struct hwrm_queue_qportcfg_output {
        /*