u32 mbox_addr)
{
for ( ; nflit; nflit--, mbox_addr += 8)
- *rpl++ = htobe64(t4_read_reg64(adap, mbox_addr));
+ *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr));
}
/*
return -EINVAL;
}
- bzero(p, size);
+ memset(p, 0, size);
memcpy(p, (const __be64 *)cmd, size);
/*
return 0;
}
+/**
+ * t4_get_pfres - retrieve VF resource limits
+ * @adapter: the adapter
+ *
+ * Retrieves configured resource limits and capabilities for a physical
+ * function. The results are stored in @adapter->pfres.
+ */
+int t4_get_pfres(struct adapter *adapter)
+{
+ struct pf_resources *pfres = &adapter->params.pfres;
+ struct fw_pfvf_cmd cmd, rpl;
+ u32 word;
+ int v;
+
+ /*
+ * Execute PFVF Read command to get VF resource limits; bail out early
+ * with error on command failure.
+ */
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PFVF_CMD) |
+ F_FW_CMD_REQUEST |
+ F_FW_CMD_READ |
+ V_FW_PFVF_CMD_PFN(adapter->pf) |
+ V_FW_PFVF_CMD_VFN(0));
+ cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
+ v = t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &rpl);
+ if (v != FW_SUCCESS)
+ return v;
+
+ /*
+ * Extract PF resource limits and return success.
+ */
+ word = be32_to_cpu(rpl.niqflint_niq);
+ pfres->niqflint = G_FW_PFVF_CMD_NIQFLINT(word);
+
+ word = be32_to_cpu(rpl.type_to_neq);
+ pfres->neq = G_FW_PFVF_CMD_NEQ(word);
+ return 0;
+}
+
/* serial flash and firmware constants and flash config file constants */
enum {
SF_ATTEMPTS = 10, /* max retries for SF operations */
return t4vf_wr_mbox(adap, &c, sizeof(c), NULL);
}
+/**
+ * t4_alloc_raw_mac_filt - Adds a raw mac entry in mps tcam
+ * @adap: the adapter
+ * @viid: the VI id
+ * @mac: the MAC address
+ * @mask: the mask
+ * @idx: index at which to add this entry
+ * @port_id: the port index
+ * @lookup_type: MAC address for inner (1) or outer (0) header
+ * @sleep_ok: call is allowed to sleep
+ *
+ * Adds the mac entry at the specified index using raw mac interface.
+ *
+ * Returns a negative error number or the allocated index for this mac.
+ */
+int t4_alloc_raw_mac_filt(struct adapter *adap, unsigned int viid,
+ const u8 *addr, const u8 *mask, unsigned int idx,
+ u8 lookup_type, u8 port_id, bool sleep_ok)
+{
+ int ret = 0;
+ struct fw_vi_mac_cmd c;
+ struct fw_vi_mac_raw *p = &c.u.raw;
+ u32 val;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
+ V_FW_VI_MAC_CMD_VIID(viid));
+ val = V_FW_CMD_LEN16(1) |
+ V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_RAW);
+ c.freemacs_to_len16 = cpu_to_be32(val);
+
+ /* Specify that this is an inner mac address */
+ p->raw_idx_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_RAW_IDX(idx));
+
+ /* Lookup Type. Outer header: 0, Inner header: 1 */
+ p->data0_pkd = cpu_to_be32(V_DATALKPTYPE(lookup_type) |
+ V_DATAPORTNUM(port_id));
+ /* Lookup mask and port mask */
+ p->data0m_pkd = cpu_to_be64(V_DATALKPTYPE(M_DATALKPTYPE) |
+ V_DATAPORTNUM(M_DATAPORTNUM));
+
+ /* Copy the address and the mask */
+ memcpy((u8 *)&p->data1[0] + 2, addr, ETHER_ADDR_LEN);
+ memcpy((u8 *)&p->data1m[0] + 2, mask, ETHER_ADDR_LEN);
+
+ ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
+ if (ret == 0) {
+ ret = G_FW_VI_MAC_CMD_RAW_IDX(be32_to_cpu(p->raw_idx_pkd));
+ if (ret != (int)idx)
+ ret = -ENOMEM;
+ }
+
+ return ret;
+}
+
+/**
+ * t4_free_raw_mac_filt - Frees a raw mac entry in mps tcam
+ * @adap: the adapter
+ * @viid: the VI id
+ * @addr: the MAC address
+ * @mask: the mask
+ * @idx: index of the entry in mps tcam
+ * @lookup_type: MAC address for inner (1) or outer (0) header
+ * @port_id: the port index
+ * @sleep_ok: call is allowed to sleep
+ *
+ * Removes the mac entry at the specified index using raw mac interface.
+ *
+ * Returns a negative error number on failure.
+ */
+int t4_free_raw_mac_filt(struct adapter *adap, unsigned int viid,
+ const u8 *addr, const u8 *mask, unsigned int idx,
+ u8 lookup_type, u8 port_id, bool sleep_ok)
+{
+ struct fw_vi_mac_cmd c;
+ struct fw_vi_mac_raw *p = &c.u.raw;
+ u32 raw;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
+ V_FW_CMD_EXEC(0) |
+ V_FW_VI_MAC_CMD_VIID(viid));
+ raw = V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_RAW);
+ c.freemacs_to_len16 = cpu_to_be32(V_FW_VI_MAC_CMD_FREEMACS(0U) |
+ raw |
+ V_FW_CMD_LEN16(1));
+
+ p->raw_idx_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_RAW_IDX(idx) |
+ FW_VI_MAC_ID_BASED_FREE);
+
+ /* Lookup Type. Outer header: 0, Inner header: 1 */
+ p->data0_pkd = cpu_to_be32(V_DATALKPTYPE(lookup_type) |
+ V_DATAPORTNUM(port_id));
+ /* Lookup mask and port mask */
+ p->data0m_pkd = cpu_to_be64(V_DATALKPTYPE(M_DATALKPTYPE) |
+ V_DATAPORTNUM(M_DATAPORTNUM));
+
+ /* Copy the address and the mask */
+ memcpy((u8 *)&p->data1[0] + 2, addr, ETHER_ADDR_LEN);
+ memcpy((u8 *)&p->data1m[0] + 2, mask, ETHER_ADDR_LEN);
+
+ return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
+}
+
/**
* t4_change_mac - modifies the exact-match filter for a MAC address
* @adap: the adapter
int t4_get_flash_params(struct adapter *adapter)
{
/*
- * Table for non-Numonix supported flash parts. Numonix parts are left
- * to the preexisting well-tested code. All flash parts have 64KB
- * sectors.
+ * Table for non-standard supported Flash parts. Note, all Flash
+ * parts must have 64KB sectors.
*/
static struct flash_desc supported_flash[] = {
{ 0x00150201, 4 << 20 }, /* Spansion 4MB S25FL032P */
int ret;
u32 flashid = 0;
unsigned int part, manufacturer;
- unsigned int density, size;
+ unsigned int density, size = 0;
/**
* Issue a Read ID Command to the Flash part. We decode supported
if (ret < 0)
return ret;
+ /**
+ * Check to see if it's one of our non-standard supported Flash parts.
+ */
for (part = 0; part < ARRAY_SIZE(supported_flash); part++) {
if (supported_flash[part].vendor_and_model_id == flashid) {
adapter->params.sf_size =
}
}
+ /**
+ * Decode Flash part size. The code below looks repetative with
+ * common encodings, but that's not guaranteed in the JEDEC
+ * specification for the Read JADEC ID command. The only thing that
+ * we're guaranteed by the JADEC specification is where the
+ * Manufacturer ID is in the returned result. After that each
+ * Manufacturer ~could~ encode things completely differently.
+ * Note, all Flash parts must have 64KB sectors.
+ */
manufacturer = flashid & 0xff;
switch (manufacturer) {
case 0x20: { /* Micron/Numonix */
case 0x22:
size = 1 << 28; /* 256MB */
break;
- default:
- dev_err(adapter, "Micron Flash Part has bad size, ID = %#x, Density code = %#x\n",
- flashid, density);
- return -EINVAL;
}
+ break;
+ }
- adapter->params.sf_size = size;
- adapter->params.sf_nsec = size / SF_SEC_SIZE;
+ case 0x9d: { /* ISSI -- Integrated Silicon Solution, Inc. */
+ /**
+ * This Density -> Size decoding table is taken from ISSI
+ * Data Sheets.
+ */
+ density = (flashid >> 16) & 0xff;
+ switch (density) {
+ case 0x16:
+ size = 1 << 25; /* 32MB */
+ break;
+ case 0x17:
+ size = 1 << 26; /* 64MB */
+ break;
+ }
break;
}
- default:
- dev_err(adapter, "Unsupported Flash Part, ID = %#x\n", flashid);
- return -EINVAL;
+
+ case 0xc2: { /* Macronix */
+ /**
+ * This Density -> Size decoding table is taken from Macronix
+ * Data Sheets.
+ */
+ density = (flashid >> 16) & 0xff;
+ switch (density) {
+ case 0x17:
+ size = 1 << 23; /* 8MB */
+ break;
+ case 0x18:
+ size = 1 << 24; /* 16MB */
+ break;
+ }
+ break;
+ }
+
+ case 0xef: { /* Winbond */
+ /**
+ * This Density -> Size decoding table is taken from Winbond
+ * Data Sheets.
+ */
+ density = (flashid >> 16) & 0xff;
+ switch (density) {
+ case 0x17:
+ size = 1 << 23; /* 8MB */
+ break;
+ case 0x18:
+ size = 1 << 24; /* 16MB */
+ break;
+ }
+ break;
+ }
+ }
+
+ /* If we didn't recognize the FLASH part, that's no real issue: the
+ * Hardware/Software contract says that Hardware will _*ALWAYS*_
+ * use a FLASH part which is at least 4MB in size and has 64KB
+ * sectors. The unrecognized FLASH part is likely to be much larger
+ * than 4MB, but that's all we really need.
+ */
+ if (size == 0) {
+ dev_warn(adapter,
+ "Unknown Flash Part, ID = %#x, assuming 4MB\n",
+ flashid);
+ size = 1 << 22;
}
+ /**
+ * Store decoded Flash size and fall through into vetting code.
+ */
+ adapter->params.sf_size = size;
+ adapter->params.sf_nsec = size / SF_SEC_SIZE;
+
found:
/*
* We should reject adapters with FLASHes which are too small. So, emit
F_PROTOCOL);
adap->params.tp.ethertype_shift = t4_filter_field_shift(adap,
F_ETHERTYPE);
-
- /*
- * If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID
- * represents the presense of an Outer VLAN instead of a VNIC ID.
- */
- if ((adap->params.tp.ingress_config & F_VNIC) == 0)
- adap->params.tp.vnic_shift = -1;
+ adap->params.tp.macmatch_shift = t4_filter_field_shift(adap,
+ F_MACMATCH);
+ adap->params.tp.tos_shift = t4_filter_field_shift(adap, F_TOS);
v = t4_read_reg(adap, LE_3_DB_HASH_MASK_GEN_IPV4_T6_A);
adap->params.tp.hash_filter_mask = v;
git.droids-corp.org / dpdk.git / blobdiff