* BSD LICENSE
*
* Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
- * Copyright (c) 2016 NXP. All rights reserved.
+ * Copyright 2016 NXP.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>
#include <dpaa2_hw_dpio.h>
-
+#include <mc/fsl_dpmng.h>
#include "dpaa2_ethdev.h"
static struct rte_dpaa2_driver rte_dpaa2_pmd;
static int dpaa2_dev_uninit(struct rte_eth_dev *eth_dev);
+static int dpaa2_dev_set_link_up(struct rte_eth_dev *dev);
+static int dpaa2_dev_set_link_down(struct rte_eth_dev *dev);
+static int dpaa2_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
/**
* Atomically reads the link status information from global
return 0;
}
+static int
+dpaa2_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ int ret;
+ struct dpaa2_dev_priv *priv = dev->data->dev_private;
+ struct fsl_mc_io *dpni = priv->hw;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (dpni == NULL) {
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
+ return -1;
+ }
+
+ if (on)
+ ret = dpni_add_vlan_id(dpni, CMD_PRI_LOW,
+ priv->token, vlan_id);
+ else
+ ret = dpni_remove_vlan_id(dpni, CMD_PRI_LOW,
+ priv->token, vlan_id);
+
+ if (ret < 0)
+ PMD_DRV_LOG(ERR, "ret = %d Unable to add/rem vlan %d hwid =%d",
+ ret, vlan_id, priv->hw_id);
+
+ return ret;
+}
+
+static void
+dpaa2_vlan_offload_set(struct rte_eth_dev *dev, int mask)
+{
+ struct dpaa2_dev_priv *priv = dev->data->dev_private;
+ struct fsl_mc_io *dpni = priv->hw;
+ int ret;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (mask & ETH_VLAN_FILTER_MASK) {
+ if (dev->data->dev_conf.rxmode.hw_vlan_filter)
+ ret = dpni_enable_vlan_filter(dpni, CMD_PRI_LOW,
+ priv->token, true);
+ else
+ ret = dpni_enable_vlan_filter(dpni, CMD_PRI_LOW,
+ priv->token, false);
+ if (ret < 0)
+ RTE_LOG(ERR, PMD, "Unable to set vlan filter = %d\n",
+ ret);
+ }
+}
+
+static int
+dpaa2_fw_version_get(struct rte_eth_dev *dev,
+ char *fw_version,
+ size_t fw_size)
+{
+ int ret;
+ struct dpaa2_dev_priv *priv = dev->data->dev_private;
+ struct fsl_mc_io *dpni = priv->hw;
+ struct mc_soc_version mc_plat_info = {0};
+ struct mc_version mc_ver_info = {0};
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (mc_get_soc_version(dpni, CMD_PRI_LOW, &mc_plat_info))
+ RTE_LOG(WARNING, PMD, "\tmc_get_soc_version failed\n");
+
+ if (mc_get_version(dpni, CMD_PRI_LOW, &mc_ver_info))
+ RTE_LOG(WARNING, PMD, "\tmc_get_version failed\n");
+
+ ret = snprintf(fw_version, fw_size,
+ "%x-%d.%d.%d",
+ mc_plat_info.svr,
+ mc_ver_info.major,
+ mc_ver_info.minor,
+ mc_ver_info.revision);
+
+ ret += 1; /* add the size of '\0' */
+ if (fw_size < (uint32_t)ret)
+ return ret;
+ else
+ return 0;
+}
+
static void
dpaa2_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
{
}
vq_id = 0;
- for (dist_idx = 0; dist_idx < priv->num_dist_per_tc[DPAA2_DEF_TC];
- dist_idx++) {
+ for (dist_idx = 0; dist_idx < priv->nb_rx_queues; dist_idx++) {
mcq = (struct dpaa2_queue *)priv->rx_vq[vq_id];
mcq->tc_index = DPAA2_DEF_TC;
mcq->flow_id = dist_idx;
PMD_INIT_FUNC_TRACE();
+ if (eth_conf->rxmode.jumbo_frame == 1) {
+ if (eth_conf->rxmode.max_rx_pkt_len <= DPAA2_MAX_RX_PKT_LEN) {
+ ret = dpaa2_dev_mtu_set(dev,
+ eth_conf->rxmode.max_rx_pkt_len);
+ if (ret) {
+ PMD_INIT_LOG(ERR,
+ "unable to set mtu. check config\n");
+ return ret;
+ }
+ } else {
+ return -1;
+ }
+ }
+
/* Check for correct configuration */
if (eth_conf->rxmode.mq_mode != ETH_MQ_RX_RSS &&
data->nb_rx_queues > 1) {
{
struct dpaa2_dev_priv *priv = dev->data->dev_private;
struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
+ struct mc_soc_version mc_plat_info = {0};
struct dpaa2_queue *dpaa2_q;
struct dpni_queue cfg;
uint8_t options = 0;
dpaa2_q = (struct dpaa2_queue *)priv->rx_vq[rx_queue_id];
dpaa2_q->mb_pool = mb_pool; /**< mbuf pool to populate RX ring. */
- /*Get the tc id and flow id from given VQ id*/
- flow_id = rx_queue_id % priv->num_dist_per_tc[dpaa2_q->tc_index];
+ /*Get the flow id from given VQ id*/
+ flow_id = rx_queue_id % priv->nb_rx_queues;
memset(&cfg, 0, sizeof(struct dpni_queue));
options = options | DPNI_QUEUE_OPT_USER_CTX;
cfg.user_context = (uint64_t)(dpaa2_q);
/*if ls2088 or rev2 device, enable the stashing */
- if ((qbman_get_version() & 0xFFFF0000) > QMAN_REV_4000) {
+
+ if (mc_get_soc_version(dpni, CMD_PRI_LOW, &mc_plat_info))
+ PMD_INIT_LOG(ERR, "\tmc_get_soc_version failed\n");
+
+ if ((mc_plat_info.svr & 0xffff0000) != SVR_LS2080A) {
options |= DPNI_QUEUE_OPT_FLC;
cfg.flc.stash_control = true;
cfg.flc.value &= 0xFFFFFFFFFFFFFFC0;
memset(&tx_conf_cfg, 0, sizeof(struct dpni_queue));
memset(&tx_flow_cfg, 0, sizeof(struct dpni_queue));
- if (priv->num_tc == 1) {
- tc_id = 0;
- flow_id = tx_queue_id % priv->num_dist_per_tc[tc_id];
- } else {
- tc_id = tx_queue_id;
- flow_id = 0;
- }
+ tc_id = tx_queue_id;
+ flow_id = 0;
ret = dpni_set_queue(dpni, CMD_PRI_LOW, priv->token, DPNI_QUEUE_TX,
tc_id, flow_id, options, &tx_flow_cfg);
if (priv->flags & DPAA2_TX_CGR_SUPPORT) {
struct dpni_congestion_notification_cfg cong_notif_cfg;
- cong_notif_cfg.units = DPNI_CONGESTION_UNIT_BYTES;
- /* Notify about congestion when the queue size is 32 KB */
+ cong_notif_cfg.units = DPNI_CONGESTION_UNIT_FRAMES;
cong_notif_cfg.threshold_entry = CONG_ENTER_TX_THRESHOLD;
/* Notify that the queue is not congested when the data in
* the queue is below this thershold.
return ret;
}
+ /* Power up the phy. Needed to make the link go Up */
+ dpaa2_dev_set_link_up(dev);
+
ret = dpni_get_qdid(dpni, CMD_PRI_LOW, priv->token,
DPNI_QUEUE_TX, &qdid);
if (ret) {
"code = %d\n", ret);
return ret;
}
+ /* VLAN Offload Settings */
+ if (priv->max_vlan_filters)
+ dpaa2_vlan_offload_set(dev, ETH_VLAN_FILTER_MASK);
return 0;
}
PMD_INIT_FUNC_TRACE();
+ dpaa2_dev_set_link_down(dev);
+
ret = dpni_disable(dpni, CMD_PRI_LOW, priv->token);
if (ret) {
PMD_INIT_LOG(ERR, "Failure (ret %d) in disabling dpni %d dev\n",
struct dpaa2_dev_priv *priv = dev->data->dev_private;
struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
int i, ret;
+ struct rte_eth_link link;
struct dpaa2_queue *dpaa2_q;
PMD_INIT_FUNC_TRACE();
" error code %d\n", ret);
return;
}
+
+ memset(&link, 0, sizeof(link));
+ dpaa2_dev_atomic_write_link_status(dev, &link);
}
static void
PMD_INIT_FUNC_TRACE();
if (dpni == NULL) {
- RTE_LOG(ERR, PMD, "dpni is NULL");
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
return;
}
ret = dpni_set_unicast_promisc(dpni, CMD_PRI_LOW, priv->token, true);
if (ret < 0)
- RTE_LOG(ERR, PMD, "Unable to enable promiscuous mode %d", ret);
+ RTE_LOG(ERR, PMD, "Unable to enable U promisc mode %d\n", ret);
+
+ ret = dpni_set_multicast_promisc(dpni, CMD_PRI_LOW, priv->token, true);
+ if (ret < 0)
+ RTE_LOG(ERR, PMD, "Unable to enable M promisc mode %d\n", ret);
}
static void
PMD_INIT_FUNC_TRACE();
if (dpni == NULL) {
- RTE_LOG(ERR, PMD, "dpni is NULL");
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
return;
}
ret = dpni_set_unicast_promisc(dpni, CMD_PRI_LOW, priv->token, false);
if (ret < 0)
- RTE_LOG(ERR, PMD, "Unable to disable promiscuous mode %d", ret);
+ RTE_LOG(ERR, PMD, "Unable to disable U promisc mode %d\n", ret);
+
+ if (dev->data->all_multicast == 0) {
+ ret = dpni_set_multicast_promisc(dpni, CMD_PRI_LOW,
+ priv->token, false);
+ if (ret < 0)
+ RTE_LOG(ERR, PMD,
+ "Unable to disable M promisc mode %d\n",
+ ret);
+ }
+}
+
+static void
+dpaa2_dev_allmulticast_enable(
+ struct rte_eth_dev *dev)
+{
+ int ret;
+ struct dpaa2_dev_priv *priv = dev->data->dev_private;
+ struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (dpni == NULL) {
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
+ return;
+ }
+
+ ret = dpni_set_multicast_promisc(dpni, CMD_PRI_LOW, priv->token, true);
+ if (ret < 0)
+ RTE_LOG(ERR, PMD, "Unable to enable multicast mode %d\n", ret);
+}
+
+static void
+dpaa2_dev_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ int ret;
+ struct dpaa2_dev_priv *priv = dev->data->dev_private;
+ struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (dpni == NULL) {
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
+ return;
+ }
+
+ /* must remain on for all promiscuous */
+ if (dev->data->promiscuous == 1)
+ return;
+
+ ret = dpni_set_multicast_promisc(dpni, CMD_PRI_LOW, priv->token, false);
+ if (ret < 0)
+ RTE_LOG(ERR, PMD, "Unable to disable multicast mode %d\n", ret);
}
static int
PMD_INIT_FUNC_TRACE();
if (dpni == NULL) {
- RTE_LOG(ERR, PMD, "dpni is NULL");
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
return -EINVAL;
}
if ((mtu < ETHER_MIN_MTU) || (frame_size > DPAA2_MAX_RX_PKT_LEN))
return -EINVAL;
+ if (frame_size > ETHER_MAX_LEN)
+ dev->data->dev_conf.rxmode.jumbo_frame = 1;
+ else
+ dev->data->dev_conf.rxmode.jumbo_frame = 0;
+
/* Set the Max Rx frame length as 'mtu' +
* Maximum Ethernet header length
*/
PMD_INIT_FUNC_TRACE();
if (dpni == NULL) {
- RTE_LOG(ERR, PMD, "dpni is NULL");
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
return -1;
}
ret = dpni_add_mac_addr(dpni, CMD_PRI_LOW,
priv->token, addr->addr_bytes);
if (ret)
- RTE_LOG(ERR, PMD, "error: Adding the MAC ADDR failed:"
- " err = %d", ret);
+ RTE_LOG(ERR, PMD,
+ "error: Adding the MAC ADDR failed: err = %d\n", ret);
return 0;
}
macaddr = &data->mac_addrs[index];
if (dpni == NULL) {
- RTE_LOG(ERR, PMD, "dpni is NULL");
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
return;
}
ret = dpni_remove_mac_addr(dpni, CMD_PRI_LOW,
priv->token, macaddr->addr_bytes);
if (ret)
- RTE_LOG(ERR, PMD, "error: Removing the MAC ADDR failed:"
- " err = %d", ret);
+ RTE_LOG(ERR, PMD,
+ "error: Removing the MAC ADDR failed: err = %d\n", ret);
}
static void
PMD_INIT_FUNC_TRACE();
if (dpni == NULL) {
- RTE_LOG(ERR, PMD, "dpni is NULL");
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
return;
}
priv->token, addr->addr_bytes);
if (ret)
- RTE_LOG(ERR, PMD, "error: Setting the MAC ADDR failed %d", ret);
+ RTE_LOG(ERR, PMD,
+ "error: Setting the MAC ADDR failed %d\n", ret);
}
static
void dpaa2_dev_stats_get(struct rte_eth_dev *dev,
PMD_INIT_FUNC_TRACE();
if (!dpni) {
- RTE_LOG(ERR, PMD, "dpni is NULL");
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
return;
}
if (!stats) {
- RTE_LOG(ERR, PMD, "stats is NULL");
+ RTE_LOG(ERR, PMD, "stats is NULL\n");
return;
}
PMD_INIT_FUNC_TRACE();
if (dpni == NULL) {
- RTE_LOG(ERR, PMD, "dpni is NULL");
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
return;
}
PMD_INIT_FUNC_TRACE();
if (dpni == NULL) {
- RTE_LOG(ERR, PMD, "error : dpni is NULL");
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
return 0;
}
memset(&old, 0, sizeof(old));
ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state);
if (ret < 0) {
- RTE_LOG(ERR, PMD, "error: dpni_get_link_state %d", ret);
+ RTE_LOG(ERR, PMD, "error: dpni_get_link_state %d\n", ret);
return -1;
}
return 0;
}
+/**
+ * Toggle the DPNI to enable, if not already enabled.
+ * This is not strictly PHY up/down - it is more of logical toggling.
+ */
+static int
+dpaa2_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ int ret = -EINVAL;
+ struct dpaa2_dev_priv *priv;
+ struct fsl_mc_io *dpni;
+ int en = 0;
+
+ PMD_INIT_FUNC_TRACE();
+
+ priv = dev->data->dev_private;
+ dpni = (struct fsl_mc_io *)priv->hw;
+
+ if (dpni == NULL) {
+ RTE_LOG(ERR, PMD, "DPNI is NULL\n");
+ return ret;
+ }
+
+ /* Check if DPNI is currently enabled */
+ ret = dpni_is_enabled(dpni, CMD_PRI_LOW, priv->token, &en);
+ if (ret) {
+ /* Unable to obtain dpni status; Not continuing */
+ PMD_DRV_LOG(ERR, "Interface Link UP failed (%d)", ret);
+ return -EINVAL;
+ }
+
+ /* Enable link if not already enabled */
+ if (!en) {
+ ret = dpni_enable(dpni, CMD_PRI_LOW, priv->token);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "Interface Link UP failed (%d)", ret);
+ return -EINVAL;
+ }
+ }
+ /* changing tx burst function to start enqueues */
+ dev->tx_pkt_burst = dpaa2_dev_tx;
+ dev->data->dev_link.link_status = 1;
+
+ PMD_DRV_LOG(INFO, "Port %d Link UP successful", dev->data->port_id);
+ return ret;
+}
+
+/**
+ * Toggle the DPNI to disable, if not already disabled.
+ * This is not strictly PHY up/down - it is more of logical toggling.
+ */
+static int
+dpaa2_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ int ret = -EINVAL;
+ struct dpaa2_dev_priv *priv;
+ struct fsl_mc_io *dpni;
+ int dpni_enabled = 0;
+ int retries = 10;
+
+ PMD_INIT_FUNC_TRACE();
+
+ priv = dev->data->dev_private;
+ dpni = (struct fsl_mc_io *)priv->hw;
+
+ if (dpni == NULL) {
+ RTE_LOG(ERR, PMD, "Device has not yet been configured\n");
+ return ret;
+ }
+
+ /*changing tx burst function to avoid any more enqueues */
+ dev->tx_pkt_burst = dummy_dev_tx;
+
+ /* Loop while dpni_disable() attempts to drain the egress FQs
+ * and confirm them back to us.
+ */
+ do {
+ ret = dpni_disable(dpni, 0, priv->token);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "dpni disable failed (%d)", ret);
+ return ret;
+ }
+ ret = dpni_is_enabled(dpni, 0, priv->token, &dpni_enabled);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "dpni_is_enabled failed (%d)", ret);
+ return ret;
+ }
+ if (dpni_enabled)
+ /* Allow the MC some slack */
+ rte_delay_us(100 * 1000);
+ } while (dpni_enabled && --retries);
+
+ if (!retries) {
+ PMD_DRV_LOG(WARNING, "Retry count exceeded disabling DPNI\n");
+ /* todo- we may have to manually cleanup queues.
+ */
+ } else {
+ PMD_DRV_LOG(INFO, "Port %d Link DOWN successful",
+ dev->data->port_id);
+ }
+
+ dev->data->dev_link.link_status = 0;
+
+ return ret;
+}
+
+static int
+dpaa2_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ int ret = -EINVAL;
+ struct dpaa2_dev_priv *priv;
+ struct fsl_mc_io *dpni;
+ struct dpni_link_state state = {0};
+
+ PMD_INIT_FUNC_TRACE();
+
+ priv = dev->data->dev_private;
+ dpni = (struct fsl_mc_io *)priv->hw;
+
+ if (dpni == NULL || fc_conf == NULL) {
+ RTE_LOG(ERR, PMD, "device not configured\n");
+ return ret;
+ }
+
+ ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state);
+ if (ret) {
+ RTE_LOG(ERR, PMD, "error: dpni_get_link_state %d\n", ret);
+ return ret;
+ }
+
+ memset(fc_conf, 0, sizeof(struct rte_eth_fc_conf));
+ if (state.options & DPNI_LINK_OPT_PAUSE) {
+ /* DPNI_LINK_OPT_PAUSE set
+ * if ASYM_PAUSE not set,
+ * RX Side flow control (handle received Pause frame)
+ * TX side flow control (send Pause frame)
+ * if ASYM_PAUSE set,
+ * RX Side flow control (handle received Pause frame)
+ * No TX side flow control (send Pause frame disabled)
+ */
+ if (!(state.options & DPNI_LINK_OPT_ASYM_PAUSE))
+ fc_conf->mode = RTE_FC_FULL;
+ else
+ fc_conf->mode = RTE_FC_RX_PAUSE;
+ } else {
+ /* DPNI_LINK_OPT_PAUSE not set
+ * if ASYM_PAUSE set,
+ * TX side flow control (send Pause frame)
+ * No RX side flow control (No action on pause frame rx)
+ * if ASYM_PAUSE not set,
+ * Flow control disabled
+ */
+ if (state.options & DPNI_LINK_OPT_ASYM_PAUSE)
+ fc_conf->mode = RTE_FC_TX_PAUSE;
+ else
+ fc_conf->mode = RTE_FC_NONE;
+ }
+
+ return ret;
+}
+
+static int
+dpaa2_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ int ret = -EINVAL;
+ struct dpaa2_dev_priv *priv;
+ struct fsl_mc_io *dpni;
+ struct dpni_link_state state = {0};
+ struct dpni_link_cfg cfg = {0};
+
+ PMD_INIT_FUNC_TRACE();
+
+ priv = dev->data->dev_private;
+ dpni = (struct fsl_mc_io *)priv->hw;
+
+ if (dpni == NULL) {
+ RTE_LOG(ERR, PMD, "dpni is NULL\n");
+ return ret;
+ }
+
+ /* It is necessary to obtain the current state before setting fc_conf
+ * as MC would return error in case rate, autoneg or duplex values are
+ * different.
+ */
+ ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state);
+ if (ret) {
+ RTE_LOG(ERR, PMD, "Unable to get link state (err=%d)\n", ret);
+ return -1;
+ }
+
+ /* Disable link before setting configuration */
+ dpaa2_dev_set_link_down(dev);
+
+ /* Based on fc_conf, update cfg */
+ cfg.rate = state.rate;
+ cfg.options = state.options;
+
+ /* update cfg with fc_conf */
+ switch (fc_conf->mode) {
+ case RTE_FC_FULL:
+ /* Full flow control;
+ * OPT_PAUSE set, ASYM_PAUSE not set
+ */
+ cfg.options |= DPNI_LINK_OPT_PAUSE;
+ cfg.options &= ~DPNI_LINK_OPT_ASYM_PAUSE;
+ break;
+ case RTE_FC_TX_PAUSE:
+ /* Enable RX flow control
+ * OPT_PAUSE not set;
+ * ASYM_PAUSE set;
+ */
+ cfg.options |= DPNI_LINK_OPT_ASYM_PAUSE;
+ cfg.options &= ~DPNI_LINK_OPT_PAUSE;
+ break;
+ case RTE_FC_RX_PAUSE:
+ /* Enable TX Flow control
+ * OPT_PAUSE set
+ * ASYM_PAUSE set
+ */
+ cfg.options |= DPNI_LINK_OPT_PAUSE;
+ cfg.options |= DPNI_LINK_OPT_ASYM_PAUSE;
+ break;
+ case RTE_FC_NONE:
+ /* Disable Flow control
+ * OPT_PAUSE not set
+ * ASYM_PAUSE not set
+ */
+ cfg.options &= ~DPNI_LINK_OPT_PAUSE;
+ cfg.options &= ~DPNI_LINK_OPT_ASYM_PAUSE;
+ break;
+ default:
+ RTE_LOG(ERR, PMD, "Incorrect Flow control flag (%d)\n",
+ fc_conf->mode);
+ return -1;
+ }
+
+ ret = dpni_set_link_cfg(dpni, CMD_PRI_LOW, priv->token, &cfg);
+ if (ret)
+ RTE_LOG(ERR, PMD,
+ "Unable to set Link configuration (err=%d)\n",
+ ret);
+
+ /* Enable link */
+ dpaa2_dev_set_link_up(dev);
+
+ return ret;
+}
+
static struct eth_dev_ops dpaa2_ethdev_ops = {
.dev_configure = dpaa2_eth_dev_configure,
.dev_start = dpaa2_dev_start,
.dev_close = dpaa2_dev_close,
.promiscuous_enable = dpaa2_dev_promiscuous_enable,
.promiscuous_disable = dpaa2_dev_promiscuous_disable,
+ .allmulticast_enable = dpaa2_dev_allmulticast_enable,
+ .allmulticast_disable = dpaa2_dev_allmulticast_disable,
+ .dev_set_link_up = dpaa2_dev_set_link_up,
+ .dev_set_link_down = dpaa2_dev_set_link_down,
.link_update = dpaa2_dev_link_update,
.stats_get = dpaa2_dev_stats_get,
.stats_reset = dpaa2_dev_stats_reset,
+ .fw_version_get = dpaa2_fw_version_get,
.dev_infos_get = dpaa2_dev_info_get,
.dev_supported_ptypes_get = dpaa2_supported_ptypes_get,
.mtu_set = dpaa2_dev_mtu_set,
+ .vlan_filter_set = dpaa2_vlan_filter_set,
+ .vlan_offload_set = dpaa2_vlan_offload_set,
.rx_queue_setup = dpaa2_dev_rx_queue_setup,
.rx_queue_release = dpaa2_dev_rx_queue_release,
.tx_queue_setup = dpaa2_dev_tx_queue_setup,
.tx_queue_release = dpaa2_dev_tx_queue_release,
+ .flow_ctrl_get = dpaa2_flow_ctrl_get,
+ .flow_ctrl_set = dpaa2_flow_ctrl_set,
.mac_addr_add = dpaa2_dev_add_mac_addr,
.mac_addr_remove = dpaa2_dev_remove_mac_addr,
.mac_addr_set = dpaa2_dev_set_mac_addr,
struct dpni_attr attr;
struct dpaa2_dev_priv *priv = eth_dev->data->dev_private;
struct dpni_buffer_layout layout;
- int i, ret, hw_id;
+ int ret, hw_id;
PMD_INIT_FUNC_TRACE();
}
priv->num_tc = attr.num_tcs;
- for (i = 0; i < attr.num_tcs; i++) {
- priv->num_dist_per_tc[i] = attr.num_queues;
- break;
- }
- /* Distribution is per Tc only,
- * so choosing RX queues from default TC only
+ /* Resetting the "num_rx_vqueues" to equal number of queues in first TC
+ * as only one TC is supported on Rx Side. Once Multiple TCs will be
+ * in use for Rx processing then this will be changed or removed.
*/
- priv->nb_rx_queues = priv->num_dist_per_tc[DPAA2_DEF_TC];
+ priv->nb_rx_queues = attr.num_queues;
- if (attr.num_tcs == 1)
- priv->nb_tx_queues = attr.num_queues;
- else
- priv->nb_tx_queues = attr.num_tcs;
+ /* TODO:Using hard coded value for number of TX queues due to dependency
+ * in MC.
+ */
+ priv->nb_tx_queues = 8;
- PMD_INIT_LOG(DEBUG, "num_tc %d", priv->num_tc);
+ PMD_INIT_LOG(DEBUG, "num TC - RX %d", priv->num_tc);
+ PMD_INIT_LOG(DEBUG, "nb_tx_queues %d", priv->nb_tx_queues);
PMD_INIT_LOG(DEBUG, "nb_rx_queues %d", priv->nb_rx_queues);
priv->hw = dpni_dev;
priv->max_vlan_filters = attr.vlan_filter_entries;
priv->flags = 0;
- priv->flags |= DPAA2_TX_CGR_SUPPORT;
- PMD_INIT_LOG(INFO, "Enable the tx congestion control support");
-
/* Allocate memory for hardware structure for queues */
ret = dpaa2_alloc_rx_tx_queues(eth_dev);
if (ret) {
}
eth_dev->dev_ops = &dpaa2_ethdev_ops;
- eth_dev->data->drv_name = rte_dpaa2_pmd.driver.name;
eth_dev->rx_pkt_burst = dpaa2_dev_prefetch_rx;
eth_dev->tx_pkt_burst = dpaa2_dev_tx;
}
static int
-rte_dpaa2_probe(struct rte_dpaa2_driver *dpaa2_drv __rte_unused,
+rte_dpaa2_probe(struct rte_dpaa2_driver *dpaa2_drv,
struct rte_dpaa2_device *dpaa2_dev)
{
struct rte_eth_dev *eth_dev;
- char ethdev_name[RTE_ETH_NAME_MAX_LEN];
-
int diag;
- sprintf(ethdev_name, "dpni-%d", dpaa2_dev->object_id);
-
- eth_dev = rte_eth_dev_allocate(ethdev_name);
+ eth_dev = rte_eth_dev_allocate(dpaa2_dev->device.name);
if (eth_dev == NULL)
return -ENOMEM;
}
}
eth_dev->device = &dpaa2_dev->device;
+ eth_dev->device->driver = &dpaa2_drv->driver;
+
dpaa2_dev->eth_dev = eth_dev;
eth_dev->data->rx_mbuf_alloc_failed = 0;
git.droids-corp.org / dpdk.git / blobdiff