* The set of PCI devices this driver supports
*/
static const struct rte_pci_id pci_id_em_map[] = {
-
-#define RTE_PCI_DEV_ID_DECL_EM(vend, dev) {RTE_PCI_DEVICE(vend, dev)},
-#include "rte_pci_dev_ids.h"
-
-{0},
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82540EM) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82545EM_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82545EM_FIBER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82546EB_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82546EB_FIBER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82546EB_QUAD_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_FIBER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_SERDES) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_SERDES_DUAL) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_SERDES_QUAD) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_QUAD_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571PT_QUAD_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_QUAD_FIBER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_QUAD_COPPER_LP) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82572EI_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82572EI_FIBER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82572EI_SERDES) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82572EI) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82573L) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82574L) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82574LA) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82583V) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LPT_I217_LM) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LPT_I217_V) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LPTLP_I218_LM) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LPTLP_I218_V) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_LM2) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_V2) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_LM3) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_V3) },
+ { .vendor_id = 0, /* sentinel */ },
};
static const struct eth_dev_ops eth_em_ops = {
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
int ret, mask;
uint32_t intr_vector = 0;
+ uint32_t *speeds;
+ int num_speeds;
+ bool autoneg;
PMD_INIT_FUNC_TRACE();
E1000_WRITE_REG(hw, E1000_ITR, UINT16_MAX);
/* Setup link speed and duplex */
- switch (dev->data->dev_conf.link_speed) {
- case ETH_LINK_SPEED_AUTONEG:
- if (dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX)
- hw->phy.autoneg_advertised = E1000_ALL_SPEED_DUPLEX;
- else if (dev->data->dev_conf.link_duplex ==
- ETH_LINK_HALF_DUPLEX)
- hw->phy.autoneg_advertised = E1000_ALL_HALF_DUPLEX;
- else if (dev->data->dev_conf.link_duplex ==
- ETH_LINK_FULL_DUPLEX)
- hw->phy.autoneg_advertised = E1000_ALL_FULL_DUPLEX;
- else
- goto error_invalid_config;
- break;
- case ETH_LINK_SPEED_10:
- if (dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX)
- hw->phy.autoneg_advertised = E1000_ALL_10_SPEED;
- else if (dev->data->dev_conf.link_duplex ==
- ETH_LINK_HALF_DUPLEX)
- hw->phy.autoneg_advertised = ADVERTISE_10_HALF;
- else if (dev->data->dev_conf.link_duplex ==
- ETH_LINK_FULL_DUPLEX)
- hw->phy.autoneg_advertised = ADVERTISE_10_FULL;
- else
- goto error_invalid_config;
- break;
- case ETH_LINK_SPEED_100:
- if (dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX)
- hw->phy.autoneg_advertised = E1000_ALL_100_SPEED;
- else if (dev->data->dev_conf.link_duplex ==
- ETH_LINK_HALF_DUPLEX)
- hw->phy.autoneg_advertised = ADVERTISE_100_HALF;
- else if (dev->data->dev_conf.link_duplex ==
- ETH_LINK_FULL_DUPLEX)
- hw->phy.autoneg_advertised = ADVERTISE_100_FULL;
- else
+ speeds = &dev->data->dev_conf.link_speeds;
+ if (*speeds == ETH_LINK_SPEED_AUTONEG) {
+ hw->phy.autoneg_advertised = E1000_ALL_SPEED_DUPLEX;
+ } else {
+ num_speeds = 0;
+ autoneg = (*speeds & ETH_LINK_SPEED_FIXED) == 0;
+
+ /* Reset */
+ hw->phy.autoneg_advertised = 0;
+
+ if (*speeds & ~(ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M |
+ ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M |
+ ETH_LINK_SPEED_1G | ETH_LINK_SPEED_FIXED)) {
+ num_speeds = -1;
goto error_invalid_config;
- break;
- case ETH_LINK_SPEED_1000:
- if ((dev->data->dev_conf.link_duplex ==
- ETH_LINK_AUTONEG_DUPLEX) ||
- (dev->data->dev_conf.link_duplex ==
- ETH_LINK_FULL_DUPLEX))
- hw->phy.autoneg_advertised = ADVERTISE_1000_FULL;
- else
+ }
+ if (*speeds & ETH_LINK_SPEED_10M_HD) {
+ hw->phy.autoneg_advertised |= ADVERTISE_10_HALF;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_10M) {
+ hw->phy.autoneg_advertised |= ADVERTISE_10_FULL;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_100M_HD) {
+ hw->phy.autoneg_advertised |= ADVERTISE_100_HALF;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_100M) {
+ hw->phy.autoneg_advertised |= ADVERTISE_100_FULL;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_1G) {
+ hw->phy.autoneg_advertised |= ADVERTISE_1000_FULL;
+ num_speeds++;
+ }
+ if (num_speeds == 0 || (!autoneg && (num_speeds > 1)))
goto error_invalid_config;
- break;
- case ETH_LINK_SPEED_10000:
- default:
- goto error_invalid_config;
}
+
e1000_setup_link(hw);
if (rte_intr_allow_others(intr_handle)) {
/* check if lsc interrupt is enabled */
- if (dev->data->dev_conf.intr_conf.lsc != 0)
+ if (dev->data->dev_conf.intr_conf.lsc != 0) {
ret = eth_em_interrupt_setup(dev);
if (ret) {
PMD_INIT_LOG(ERR, "Unable to setup interrupts");
em_dev_clear_queues(dev);
return ret;
}
+ }
} else {
rte_intr_callback_unregister(intr_handle,
eth_em_interrupt_handler,
return 0;
error_invalid_config:
- PMD_INIT_LOG(ERR, "Invalid link_speed/link_duplex (%u/%u) for port %u",
- dev->data->dev_conf.link_speed,
- dev->data->dev_conf.link_duplex, dev->data->port_id);
+ PMD_INIT_LOG(ERR, "Invalid advertised speeds (%u) for port %u",
+ dev->data->dev_conf.link_speeds, dev->data->port_id);
em_dev_clear_queues(dev);
return -EINVAL;
}
.nb_min = E1000_MIN_RING_DESC,
.nb_align = EM_TXD_ALIGN,
};
+
+ dev_info->speed_capa = ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M |
+ ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M |
+ ETH_LINK_SPEED_1G;
}
/* return 0 means link status changed, -1 means not changed */
old = link;
/* Now we check if a transition has happened */
- if (link_check && (link.link_status == 0)) {
- hw->mac.ops.get_link_up_info(hw, &link.link_speed,
- &link.link_duplex);
- link.link_status = 1;
- } else if (!link_check && (link.link_status == 1)) {
+ if (link_check && (link.link_status == ETH_LINK_DOWN)) {
+ uint16_t duplex, speed;
+ hw->mac.ops.get_link_up_info(hw, &speed, &duplex);
+ link.link_duplex = (duplex == FULL_DUPLEX) ?
+ ETH_LINK_FULL_DUPLEX :
+ ETH_LINK_HALF_DUPLEX;
+ link.link_speed = speed;
+ link.link_status = ETH_LINK_UP;
+ link.link_autoneg = !(dev->data->dev_conf.link_speeds &
+ ETH_LINK_SPEED_FIXED);
+ } else if (!link_check && (link.link_status == ETH_LINK_UP)) {
link.link_speed = 0;
- link.link_duplex = 0;
- link.link_status = 0;
+ link.link_duplex = ETH_LINK_HALF_DUPLEX;
+ link.link_status = ETH_LINK_DOWN;
+ link.link_autoneg = ETH_LINK_SPEED_FIXED;
}
rte_em_dev_atomic_write_link_status(dev, &link);
.init = rte_em_pmd_init,
};
-PMD_REGISTER_DRIVER(em_pmd_drv);
+PMD_REGISTER_DRIVER(em_pmd_drv, em);
+DRIVER_REGISTER_PCI_TABLE(em, pci_id_em_map);
git.droids-corp.org / dpdk.git / blobdiff