* The set of PCI devices this driver supports
*/
static const struct rte_pci_id pci_id_em_map[] = {
-
-#define RTE_PCI_DEV_ID_DECL_EM(vend, dev) {RTE_PCI_DEVICE(vend, dev)},
-#include "rte_pci_dev_ids.h"
-
-{0},
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82540EM) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82545EM_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82545EM_FIBER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82546EB_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82546EB_FIBER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82546EB_QUAD_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_FIBER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_SERDES) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_SERDES_DUAL) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_SERDES_QUAD) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_QUAD_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571PT_QUAD_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_QUAD_FIBER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_QUAD_COPPER_LP) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82572EI_COPPER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82572EI_FIBER) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82572EI_SERDES) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82572EI) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82573L) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82574L) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82574LA) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82583V) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LPT_I217_LM) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LPT_I217_V) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LPTLP_I218_LM) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LPTLP_I218_V) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_LM2) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_V2) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_LM3) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_V3) },
+ { .vendor_id = 0, /* sentinel */ },
};
static const struct eth_dev_ops eth_em_ops = {
return 0;
}
+/**
+ * eth_em_dev_is_ich8 - Check for ICH8 device
+ * @hw: pointer to the HW structure
+ *
+ * return TRUE for ICH8, otherwise FALSE
+ **/
+static bool
+eth_em_dev_is_ich8(struct e1000_hw *hw)
+{
+ DEBUGFUNC("eth_em_dev_is_ich8");
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_PCH_LPT_I217_LM:
+ case E1000_DEV_ID_PCH_LPT_I217_V:
+ case E1000_DEV_ID_PCH_LPTLP_I218_LM:
+ case E1000_DEV_ID_PCH_LPTLP_I218_V:
+ case E1000_DEV_ID_PCH_I218_V2:
+ case E1000_DEV_ID_PCH_I218_LM2:
+ case E1000_DEV_ID_PCH_I218_V3:
+ case E1000_DEV_ID_PCH_I218_LM3:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
static int
eth_em_dev_init(struct rte_eth_dev *eth_dev)
{
pci_dev = eth_dev->pci_dev;
- rte_eth_copy_pci_info(eth_dev, pci_dev);
-
eth_dev->dev_ops = ð_em_ops;
eth_dev->rx_pkt_burst = (eth_rx_burst_t)ð_em_recv_pkts;
eth_dev->tx_pkt_burst = (eth_tx_burst_t)ð_em_xmit_pkts;
return 0;
}
+ rte_eth_copy_pci_info(eth_dev, pci_dev);
+
hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
hw->device_id = pci_dev->id.device_id;
adapter->stopped = 0;
/* For ICH8 support we'll need to map the flash memory BAR */
+ if (eth_em_dev_is_ich8(hw))
+ hw->flash_address = (void *)pci_dev->mem_resource[1].addr;
if (e1000_setup_init_funcs(hw, TRUE) != E1000_SUCCESS ||
em_hw_init(hw) != 0) {
"failed to init HW",
eth_dev->data->port_id, pci_dev->id.vendor_id,
pci_dev->id.device_id);
- return -(ENODEV);
+ return -ENODEV;
}
/* Allocate memory for storing MAC addresses */
PMD_INIT_LOG(ERR, "Failed to allocate %d bytes needed to "
"store MAC addresses",
ETHER_ADDR_LEN * hw->mac.rar_entry_count);
- return -(ENOMEM);
+ return -ENOMEM;
}
/* Copy the permanent MAC address */
rte_intr_callback_register(&(pci_dev->intr_handle),
eth_em_interrupt_handler, (void *)eth_dev);
- return (0);
+ return 0;
}
static int
.id_table = pci_id_em_map,
.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC |
RTE_PCI_DRV_DETACHABLE,
+ .probe = rte_eth_dev_pci_probe,
+ .remove = rte_eth_dev_pci_remove,
},
.eth_dev_init = eth_em_dev_init,
.eth_dev_uninit = eth_em_dev_uninit,
.dev_private_size = sizeof(struct e1000_adapter),
};
-static int
-rte_em_pmd_init(const char *name __rte_unused, const char *params __rte_unused)
-{
- rte_eth_driver_register(&rte_em_pmd);
- return 0;
-}
-
static int
em_hw_init(struct e1000_hw *hw)
{
PMD_INIT_LOG(ERR, "PHY reset is blocked due to "
"SOL/IDER session");
}
- return (0);
+ return 0;
error:
em_hw_control_release(hw);
- return (diag);
+ return diag;
}
static int
intr->flags |= E1000_FLAG_NEED_LINK_UPDATE;
PMD_INIT_FUNC_TRACE();
- return (0);
+ return 0;
}
static void
break;
case e1000_pchlan:
case e1000_pch2lan:
+ case e1000_pch_lpt:
pba = E1000_PBA_26K;
break;
default:
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
int ret, mask;
uint32_t intr_vector = 0;
+ uint32_t *speeds;
+ int num_speeds;
+ bool autoneg;
PMD_INIT_FUNC_TRACE();
/* Initialize the hardware */
if (em_hardware_init(hw)) {
PMD_INIT_LOG(ERR, "Unable to initialize the hardware");
- return (-EIO);
+ return -EIO;
}
E1000_WRITE_REG(hw, E1000_VET, ETHER_TYPE_VLAN);
E1000_WRITE_REG(hw, E1000_ITR, UINT16_MAX);
/* Setup link speed and duplex */
- switch (dev->data->dev_conf.link_speed) {
- case ETH_LINK_SPEED_AUTONEG:
- if (dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX)
- hw->phy.autoneg_advertised = E1000_ALL_SPEED_DUPLEX;
- else if (dev->data->dev_conf.link_duplex ==
- ETH_LINK_HALF_DUPLEX)
- hw->phy.autoneg_advertised = E1000_ALL_HALF_DUPLEX;
- else if (dev->data->dev_conf.link_duplex ==
- ETH_LINK_FULL_DUPLEX)
- hw->phy.autoneg_advertised = E1000_ALL_FULL_DUPLEX;
- else
- goto error_invalid_config;
- break;
- case ETH_LINK_SPEED_10:
- if (dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX)
- hw->phy.autoneg_advertised = E1000_ALL_10_SPEED;
- else if (dev->data->dev_conf.link_duplex ==
- ETH_LINK_HALF_DUPLEX)
- hw->phy.autoneg_advertised = ADVERTISE_10_HALF;
- else if (dev->data->dev_conf.link_duplex ==
- ETH_LINK_FULL_DUPLEX)
- hw->phy.autoneg_advertised = ADVERTISE_10_FULL;
- else
- goto error_invalid_config;
- break;
- case ETH_LINK_SPEED_100:
- if (dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX)
- hw->phy.autoneg_advertised = E1000_ALL_100_SPEED;
- else if (dev->data->dev_conf.link_duplex ==
- ETH_LINK_HALF_DUPLEX)
- hw->phy.autoneg_advertised = ADVERTISE_100_HALF;
- else if (dev->data->dev_conf.link_duplex ==
- ETH_LINK_FULL_DUPLEX)
- hw->phy.autoneg_advertised = ADVERTISE_100_FULL;
- else
+ speeds = &dev->data->dev_conf.link_speeds;
+ if (*speeds == ETH_LINK_SPEED_AUTONEG) {
+ hw->phy.autoneg_advertised = E1000_ALL_SPEED_DUPLEX;
+ } else {
+ num_speeds = 0;
+ autoneg = (*speeds & ETH_LINK_SPEED_FIXED) == 0;
+
+ /* Reset */
+ hw->phy.autoneg_advertised = 0;
+
+ if (*speeds & ~(ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M |
+ ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M |
+ ETH_LINK_SPEED_1G | ETH_LINK_SPEED_FIXED)) {
+ num_speeds = -1;
goto error_invalid_config;
- break;
- case ETH_LINK_SPEED_1000:
- if ((dev->data->dev_conf.link_duplex ==
- ETH_LINK_AUTONEG_DUPLEX) ||
- (dev->data->dev_conf.link_duplex ==
- ETH_LINK_FULL_DUPLEX))
- hw->phy.autoneg_advertised = ADVERTISE_1000_FULL;
- else
+ }
+ if (*speeds & ETH_LINK_SPEED_10M_HD) {
+ hw->phy.autoneg_advertised |= ADVERTISE_10_HALF;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_10M) {
+ hw->phy.autoneg_advertised |= ADVERTISE_10_FULL;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_100M_HD) {
+ hw->phy.autoneg_advertised |= ADVERTISE_100_HALF;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_100M) {
+ hw->phy.autoneg_advertised |= ADVERTISE_100_FULL;
+ num_speeds++;
+ }
+ if (*speeds & ETH_LINK_SPEED_1G) {
+ hw->phy.autoneg_advertised |= ADVERTISE_1000_FULL;
+ num_speeds++;
+ }
+ if (num_speeds == 0 || (!autoneg && (num_speeds > 1)))
goto error_invalid_config;
- break;
- case ETH_LINK_SPEED_10000:
- default:
- goto error_invalid_config;
}
+
e1000_setup_link(hw);
if (rte_intr_allow_others(intr_handle)) {
/* check if lsc interrupt is enabled */
- if (dev->data->dev_conf.intr_conf.lsc != 0)
+ if (dev->data->dev_conf.intr_conf.lsc != 0) {
ret = eth_em_interrupt_setup(dev);
if (ret) {
PMD_INIT_LOG(ERR, "Unable to setup interrupts");
em_dev_clear_queues(dev);
return ret;
}
+ }
} else {
rte_intr_callback_unregister(intr_handle,
eth_em_interrupt_handler,
PMD_INIT_LOG(DEBUG, "<<");
- return (0);
+ return 0;
error_invalid_config:
- PMD_INIT_LOG(ERR, "Invalid link_speed/link_duplex (%u/%u) for port %u",
- dev->data->dev_conf.link_speed,
- dev->data->dev_conf.link_duplex, dev->data->port_id);
+ PMD_INIT_LOG(ERR, "Invalid advertised speeds (%u) for port %u",
+ dev->data->dev_conf.link_speeds, dev->data->port_id);
em_dev_clear_queues(dev);
- return (-EINVAL);
+ return -EINVAL;
}
/*********************************************************************
hw->fc.low_water = 0x5048;
hw->fc.pause_time = 0x0650;
hw->fc.refresh_time = 0x0400;
+ } else if (hw->mac.type == e1000_pch_lpt) {
+ hw->fc.requested_mode = e1000_fc_full;
}
diag = e1000_init_hw(hw);
if (diag < 0)
- return (diag);
+ return diag;
e1000_check_for_link(hw);
- return (0);
+ return 0;
}
/* This function is based on em_update_stats_counters() in e1000/if_em.c */
rte_stats->imissed = stats->mpc;
rte_stats->ierrors = stats->crcerrs +
stats->rlec + stats->ruc + stats->roc +
- rte_stats->imissed +
stats->rxerrc + stats->algnerrc + stats->cexterr;
/* Tx Errors */
case e1000_ich9lan:
case e1000_ich10lan:
case e1000_pch2lan:
+ case e1000_pch_lpt:
case e1000_82574:
case e1000_80003es2lan: /* 9K Jumbo Frame size */
case e1000_82583:
- return (0x2412);
+ return 0x2412;
case e1000_pchlan:
- return (0x1000);
+ return 0x1000;
/* Adapters that do not support jumbo frames */
case e1000_ich8lan:
- return (ETHER_MAX_LEN);
+ return ETHER_MAX_LEN;
default:
- return (MAX_JUMBO_FRAME_SIZE);
+ return MAX_JUMBO_FRAME_SIZE;
}
}
.nb_min = E1000_MIN_RING_DESC,
.nb_align = EM_TXD_ALIGN,
};
+
+ dev_info->speed_capa = ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M |
+ ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M |
+ ETH_LINK_SPEED_1G;
}
/* return 0 means link status changed, -1 means not changed */
old = link;
/* Now we check if a transition has happened */
- if (link_check && (link.link_status == 0)) {
- hw->mac.ops.get_link_up_info(hw, &link.link_speed,
- &link.link_duplex);
- link.link_status = 1;
- } else if (!link_check && (link.link_status == 1)) {
+ if (link_check && (link.link_status == ETH_LINK_DOWN)) {
+ uint16_t duplex, speed;
+ hw->mac.ops.get_link_up_info(hw, &speed, &duplex);
+ link.link_duplex = (duplex == FULL_DUPLEX) ?
+ ETH_LINK_FULL_DUPLEX :
+ ETH_LINK_HALF_DUPLEX;
+ link.link_speed = speed;
+ link.link_status = ETH_LINK_UP;
+ link.link_autoneg = !(dev->data->dev_conf.link_speeds &
+ ETH_LINK_SPEED_FIXED);
+ } else if (!link_check && (link.link_status == ETH_LINK_UP)) {
link.link_speed = 0;
- link.link_duplex = 0;
- link.link_status = 0;
+ link.link_duplex = ETH_LINK_HALF_DUPLEX;
+ link.link_status = ETH_LINK_DOWN;
+ link.link_autoneg = ETH_LINK_SPEED_FIXED;
}
rte_em_dev_atomic_write_link_status(dev, &link);
E1000_READ_REG(hw, E1000_ICR);
regval = E1000_READ_REG(hw, E1000_IMS);
E1000_WRITE_REG(hw, E1000_IMS, regval | E1000_ICR_LSC);
- return (0);
+ return 0;
}
/*
struct e1000_hw *hw;
hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- return (e1000_led_on(hw) == E1000_SUCCESS ? 0 : -ENOTSUP);
+ return e1000_led_on(hw) == E1000_SUCCESS ? 0 : -ENOTSUP;
}
static int
struct e1000_hw *hw;
hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- return (e1000_led_off(hw) == E1000_SUCCESS ? 0 : -ENOTSUP);
+ return e1000_led_off(hw) == E1000_SUCCESS ? 0 : -ENOTSUP;
}
static int
(fc_conf->high_water < fc_conf->low_water)) {
PMD_INIT_LOG(ERR, "e1000 incorrect high/low water value");
PMD_INIT_LOG(ERR, "high water must <= 0x%x", max_high_water);
- return (-EINVAL);
+ return -EINVAL;
}
hw->fc.requested_mode = rte_fcmode_2_e1000_fcmode[fc_conf->mode];
}
PMD_INIT_LOG(ERR, "e1000_setup_link_generic = 0x%x", err);
- return (-EIO);
+ return -EIO;
}
static void
return 0;
}
-struct rte_driver em_pmd_drv = {
- .type = PMD_PDEV,
- .init = rte_em_pmd_init,
-};
-
-PMD_REGISTER_DRIVER(em_pmd_drv);
+DRIVER_REGISTER_PCI(net_e1000_em, rte_em_pmd.pci_drv);
+DRIVER_REGISTER_PCI_TABLE(net_e1000_em, pci_id_em_map);
git.droids-corp.org / dpdk.git / blobdiff