mbuf: add rte prefix to offload flags
[dpdk.git] / drivers / net / e1000 / igb_rxtx.c
index 684fa4a..3d02dd7 100644 (file)
@@ -31,7 +31,7 @@
 #include <rte_malloc.h>
 #include <rte_mbuf.h>
 #include <rte_ether.h>
-#include <rte_ethdev_driver.h>
+#include <ethdev_driver.h>
 #include <rte_prefetch.h>
 #include <rte_udp.h>
 #include <rte_tcp.h>
 #include "e1000_ethdev.h"
 
 #ifdef RTE_LIBRTE_IEEE1588
-#define IGB_TX_IEEE1588_TMST PKT_TX_IEEE1588_TMST
+#define IGB_TX_IEEE1588_TMST RTE_MBUF_F_TX_IEEE1588_TMST
 #else
 #define IGB_TX_IEEE1588_TMST 0
 #endif
 /* Bit Mask to indicate what bits required for building TX context */
-#define IGB_TX_OFFLOAD_MASK (                   \
-               PKT_TX_OUTER_IPV6 |      \
-               PKT_TX_OUTER_IPV4 |      \
-               PKT_TX_IPV6 |            \
-               PKT_TX_IPV4 |            \
-               PKT_TX_VLAN_PKT |                \
-               PKT_TX_IP_CKSUM |                \
-               PKT_TX_L4_MASK |                 \
-               PKT_TX_TCP_SEG |                 \
+#define IGB_TX_OFFLOAD_MASK (RTE_MBUF_F_TX_OUTER_IPV6 |         \
+               RTE_MBUF_F_TX_OUTER_IPV4 |       \
+               RTE_MBUF_F_TX_IPV6 |             \
+               RTE_MBUF_F_TX_IPV4 |             \
+               RTE_MBUF_F_TX_VLAN_PKT |                 \
+               RTE_MBUF_F_TX_IP_CKSUM |                 \
+               RTE_MBUF_F_TX_L4_MASK |          \
+               RTE_MBUF_F_TX_TCP_SEG |          \
                IGB_TX_IEEE1588_TMST)
 
 #define IGB_TX_OFFLOAD_NOTSUP_MASK \
-               (PKT_TX_OFFLOAD_MASK ^ IGB_TX_OFFLOAD_MASK)
+               (RTE_MBUF_F_TX_OFFLOAD_MASK ^ IGB_TX_OFFLOAD_MASK)
 
 /**
  * Structure associated with each descriptor of the RX ring of a RX queue.
@@ -224,12 +223,12 @@ struct igb_tx_queue {
 static inline uint64_t
 check_tso_para(uint64_t ol_req, union igb_tx_offload ol_para)
 {
-       if (!(ol_req & PKT_TX_TCP_SEG))
+       if (!(ol_req & RTE_MBUF_F_TX_TCP_SEG))
                return ol_req;
        if ((ol_para.tso_segsz > IGB_TSO_MAX_MSS) || (ol_para.l2_len +
                        ol_para.l3_len + ol_para.l4_len > IGB_TSO_MAX_HDRLEN)) {
-               ol_req &= ~PKT_TX_TCP_SEG;
-               ol_req |= PKT_TX_TCP_CKSUM;
+               ol_req &= ~RTE_MBUF_F_TX_TCP_SEG;
+               ol_req |= RTE_MBUF_F_TX_TCP_CKSUM;
        }
        return ol_req;
 }
@@ -260,13 +259,13 @@ igbe_set_xmit_ctx(struct igb_tx_queue* txq,
        /* Specify which HW CTX to upload. */
        mss_l4len_idx = (ctx_idx << E1000_ADVTXD_IDX_SHIFT);
 
-       if (ol_flags & PKT_TX_VLAN_PKT)
+       if (ol_flags & RTE_MBUF_F_TX_VLAN_PKT)
                tx_offload_mask.data |= TX_VLAN_CMP_MASK;
 
        /* check if TCP segmentation required for this packet */
-       if (ol_flags & PKT_TX_TCP_SEG) {
+       if (ol_flags & RTE_MBUF_F_TX_TCP_SEG) {
                /* implies IP cksum in IPv4 */
-               if (ol_flags & PKT_TX_IP_CKSUM)
+               if (ol_flags & RTE_MBUF_F_TX_IP_CKSUM)
                        type_tucmd_mlhl = E1000_ADVTXD_TUCMD_IPV4 |
                                E1000_ADVTXD_TUCMD_L4T_TCP |
                                E1000_ADVTXD_DTYP_CTXT | E1000_ADVTXD_DCMD_DEXT;
@@ -279,26 +278,26 @@ igbe_set_xmit_ctx(struct igb_tx_queue* txq,
                mss_l4len_idx |= tx_offload.tso_segsz << E1000_ADVTXD_MSS_SHIFT;
                mss_l4len_idx |= tx_offload.l4_len << E1000_ADVTXD_L4LEN_SHIFT;
        } else { /* no TSO, check if hardware checksum is needed */
-               if (ol_flags & (PKT_TX_IP_CKSUM | PKT_TX_L4_MASK))
+               if (ol_flags & (RTE_MBUF_F_TX_IP_CKSUM | RTE_MBUF_F_TX_L4_MASK))
                        tx_offload_mask.data |= TX_MACIP_LEN_CMP_MASK;
 
-               if (ol_flags & PKT_TX_IP_CKSUM)
+               if (ol_flags & RTE_MBUF_F_TX_IP_CKSUM)
                        type_tucmd_mlhl = E1000_ADVTXD_TUCMD_IPV4;
 
-               switch (ol_flags & PKT_TX_L4_MASK) {
-               case PKT_TX_UDP_CKSUM:
+               switch (ol_flags & RTE_MBUF_F_TX_L4_MASK) {
+               case RTE_MBUF_F_TX_UDP_CKSUM:
                        type_tucmd_mlhl |= E1000_ADVTXD_TUCMD_L4T_UDP |
                                E1000_ADVTXD_DTYP_CTXT | E1000_ADVTXD_DCMD_DEXT;
                        mss_l4len_idx |= sizeof(struct rte_udp_hdr)
                                << E1000_ADVTXD_L4LEN_SHIFT;
                        break;
-               case PKT_TX_TCP_CKSUM:
+               case RTE_MBUF_F_TX_TCP_CKSUM:
                        type_tucmd_mlhl |= E1000_ADVTXD_TUCMD_L4T_TCP |
                                E1000_ADVTXD_DTYP_CTXT | E1000_ADVTXD_DCMD_DEXT;
                        mss_l4len_idx |= sizeof(struct rte_tcp_hdr)
                                << E1000_ADVTXD_L4LEN_SHIFT;
                        break;
-               case PKT_TX_SCTP_CKSUM:
+               case RTE_MBUF_F_TX_SCTP_CKSUM:
                        type_tucmd_mlhl |= E1000_ADVTXD_TUCMD_L4T_SCTP |
                                E1000_ADVTXD_DTYP_CTXT | E1000_ADVTXD_DCMD_DEXT;
                        mss_l4len_idx |= sizeof(struct rte_sctp_hdr)
@@ -320,7 +319,7 @@ igbe_set_xmit_ctx(struct igb_tx_queue* txq,
        vlan_macip_lens = (uint32_t)tx_offload.data;
        ctx_txd->vlan_macip_lens = rte_cpu_to_le_32(vlan_macip_lens);
        ctx_txd->mss_l4len_idx = rte_cpu_to_le_32(mss_l4len_idx);
-       ctx_txd->seqnum_seed = 0;
+       ctx_txd->u.seqnum_seed = 0;
 }
 
 /*
@@ -357,9 +356,9 @@ tx_desc_cksum_flags_to_olinfo(uint64_t ol_flags)
        static const uint32_t l3_olinfo[2] = {0, E1000_ADVTXD_POPTS_IXSM};
        uint32_t tmp;
 
-       tmp  = l4_olinfo[(ol_flags & PKT_TX_L4_MASK)  != PKT_TX_L4_NO_CKSUM];
-       tmp |= l3_olinfo[(ol_flags & PKT_TX_IP_CKSUM) != 0];
-       tmp |= l4_olinfo[(ol_flags & PKT_TX_TCP_SEG) != 0];
+       tmp  = l4_olinfo[(ol_flags & RTE_MBUF_F_TX_L4_MASK)  != RTE_MBUF_F_TX_L4_NO_CKSUM];
+       tmp |= l3_olinfo[(ol_flags & RTE_MBUF_F_TX_IP_CKSUM) != 0];
+       tmp |= l4_olinfo[(ol_flags & RTE_MBUF_F_TX_TCP_SEG) != 0];
        return tmp;
 }
 
@@ -369,8 +368,8 @@ tx_desc_vlan_flags_to_cmdtype(uint64_t ol_flags)
        uint32_t cmdtype;
        static uint32_t vlan_cmd[2] = {0, E1000_ADVTXD_DCMD_VLE};
        static uint32_t tso_cmd[2] = {0, E1000_ADVTXD_DCMD_TSE};
-       cmdtype = vlan_cmd[(ol_flags & PKT_TX_VLAN_PKT) != 0];
-       cmdtype |= tso_cmd[(ol_flags & PKT_TX_TCP_SEG) != 0];
+       cmdtype = vlan_cmd[(ol_flags & RTE_MBUF_F_TX_VLAN_PKT) != 0];
+       cmdtype |= tso_cmd[(ol_flags & RTE_MBUF_F_TX_TCP_SEG) != 0];
        return cmdtype;
 }
 
@@ -526,11 +525,11 @@ eth_igb_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
                 */
                cmd_type_len = txq->txd_type |
                        E1000_ADVTXD_DCMD_IFCS | E1000_ADVTXD_DCMD_DEXT;
-               if (tx_ol_req & PKT_TX_TCP_SEG)
+               if (tx_ol_req & RTE_MBUF_F_TX_TCP_SEG)
                        pkt_len -= (tx_pkt->l2_len + tx_pkt->l3_len + tx_pkt->l4_len);
                olinfo_status = (pkt_len << E1000_ADVTXD_PAYLEN_SHIFT);
 #if defined(RTE_LIBRTE_IEEE1588)
-               if (ol_flags & PKT_TX_IEEE1588_TMST)
+               if (ol_flags & RTE_MBUF_F_TX_IEEE1588_TMST)
                        cmd_type_len |= E1000_ADVTXD_MAC_TSTAMP;
 #endif
                if (tx_ol_req) {
@@ -628,7 +627,7 @@ eth_igb_prep_pkts(__rte_unused void *tx_queue, struct rte_mbuf **tx_pkts,
                m = tx_pkts[i];
 
                /* Check some limitations for TSO in hardware */
-               if (m->ol_flags & PKT_TX_TCP_SEG)
+               if (m->ol_flags & RTE_MBUF_F_TX_TCP_SEG)
                        if ((m->tso_segsz > IGB_TSO_MAX_MSS) ||
                                        (m->l2_len + m->l3_len + m->l4_len >
                                        IGB_TSO_MAX_HDRLEN)) {
@@ -641,7 +640,7 @@ eth_igb_prep_pkts(__rte_unused void *tx_queue, struct rte_mbuf **tx_pkts,
                        return i;
                }
 
-#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+#ifdef RTE_ETHDEV_DEBUG_TX
                ret = rte_validate_tx_offload(m);
                if (ret != 0) {
                        rte_errno = -ret;
@@ -743,11 +742,11 @@ igb_rxd_pkt_info_to_pkt_type(uint16_t pkt_info)
 static inline uint64_t
 rx_desc_hlen_type_rss_to_pkt_flags(struct igb_rx_queue *rxq, uint32_t hl_tp_rs)
 {
-       uint64_t pkt_flags = ((hl_tp_rs & 0x0F) == 0) ?  0 : PKT_RX_RSS_HASH;
+       uint64_t pkt_flags = ((hl_tp_rs & 0x0F) == 0) ?  0 : RTE_MBUF_F_RX_RSS_HASH;
 
 #if defined(RTE_LIBRTE_IEEE1588)
        static uint32_t ip_pkt_etqf_map[8] = {
-               0, 0, 0, PKT_RX_IEEE1588_PTP,
+               0, 0, 0, RTE_MBUF_F_RX_IEEE1588_PTP,
                0, 0, 0, 0,
        };
 
@@ -773,11 +772,11 @@ rx_desc_status_to_pkt_flags(uint32_t rx_status)
 
        /* Check if VLAN present */
        pkt_flags = ((rx_status & E1000_RXD_STAT_VP) ?
-               PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED : 0);
+               RTE_MBUF_F_RX_VLAN | RTE_MBUF_F_RX_VLAN_STRIPPED : 0);
 
 #if defined(RTE_LIBRTE_IEEE1588)
        if (rx_status & E1000_RXD_STAT_TMST)
-               pkt_flags = pkt_flags | PKT_RX_IEEE1588_TMST;
+               pkt_flags = pkt_flags | RTE_MBUF_F_RX_IEEE1588_TMST;
 #endif
        return pkt_flags;
 }
@@ -791,10 +790,10 @@ rx_desc_error_to_pkt_flags(uint32_t rx_status)
         */
 
        static uint64_t error_to_pkt_flags_map[4] = {
-               PKT_RX_IP_CKSUM_GOOD | PKT_RX_L4_CKSUM_GOOD,
-               PKT_RX_IP_CKSUM_GOOD | PKT_RX_L4_CKSUM_BAD,
-               PKT_RX_IP_CKSUM_BAD | PKT_RX_L4_CKSUM_GOOD,
-               PKT_RX_IP_CKSUM_BAD | PKT_RX_L4_CKSUM_BAD
+               RTE_MBUF_F_RX_IP_CKSUM_GOOD | RTE_MBUF_F_RX_L4_CKSUM_GOOD,
+               RTE_MBUF_F_RX_IP_CKSUM_GOOD | RTE_MBUF_F_RX_L4_CKSUM_BAD,
+               RTE_MBUF_F_RX_IP_CKSUM_BAD | RTE_MBUF_F_RX_L4_CKSUM_GOOD,
+               RTE_MBUF_F_RX_IP_CKSUM_BAD | RTE_MBUF_F_RX_L4_CKSUM_BAD
        };
        return error_to_pkt_flags_map[(rx_status >>
                E1000_RXD_ERR_CKSUM_BIT) & E1000_RXD_ERR_CKSUM_MSK];
@@ -936,7 +935,7 @@ eth_igb_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
                hlen_type_rss = rte_le_to_cpu_32(rxd.wb.lower.lo_dword.data);
 
                /*
-                * The vlan_tci field is only valid when PKT_RX_VLAN is
+                * The vlan_tci field is only valid when RTE_MBUF_F_RX_VLAN is
                 * set in the pkt_flags field and must be in CPU byte order.
                 */
                if ((staterr & rte_cpu_to_le_32(E1000_RXDEXT_STATERR_LB)) &&
@@ -1176,7 +1175,7 @@ eth_igb_recv_scattered_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
                first_seg->hash.rss = rxd.wb.lower.hi_dword.rss;
 
                /*
-                * The vlan_tci field is only valid when PKT_RX_VLAN is
+                * The vlan_tci field is only valid when RTE_MBUF_F_RX_VLAN is
                 * set in the pkt_flags field and must be in CPU byte order.
                 */
                if ((staterr & rte_cpu_to_le_32(E1000_RXDEXT_STATERR_LB)) &&
@@ -1295,113 +1294,107 @@ igb_tx_done_cleanup(struct igb_tx_queue *txq, uint32_t free_cnt)
        uint16_t tx_id;    /* Current segment being processed. */
        uint16_t tx_last;  /* Last segment in the current packet. */
        uint16_t tx_next;  /* First segment of the next packet. */
-       int count;
+       int count = 0;
 
-       if (txq != NULL) {
-               count = 0;
-               sw_ring = txq->sw_ring;
-               txr = txq->tx_ring;
+       if (!txq)
+               return -ENODEV;
 
-               /*
-                * tx_tail is the last sent packet on the sw_ring. Goto the end
-                * of that packet (the last segment in the packet chain) and
-                * then the next segment will be the start of the oldest segment
-                * in the sw_ring. This is the first packet that will be
-                * attempted to be freed.
-                */
+       sw_ring = txq->sw_ring;
+       txr = txq->tx_ring;
 
-               /* Get last segment in most recently added packet. */
-               tx_first = sw_ring[txq->tx_tail].last_id;
+       /* tx_tail is the last sent packet on the sw_ring. Goto the end
+        * of that packet (the last segment in the packet chain) and
+        * then the next segment will be the start of the oldest segment
+        * in the sw_ring. This is the first packet that will be
+        * attempted to be freed.
+        */
 
-               /* Get the next segment, which is the oldest segment in ring. */
-               tx_first = sw_ring[tx_first].next_id;
+       /* Get last segment in most recently added packet. */
+       tx_first = sw_ring[txq->tx_tail].last_id;
 
-               /* Set the current index to the first. */
-               tx_id = tx_first;
+       /* Get the next segment, which is the oldest segment in ring. */
+       tx_first = sw_ring[tx_first].next_id;
 
-               /*
-                * Loop through each packet. For each packet, verify that an
-                * mbuf exists and that the last segment is free. If so, free
-                * it and move on.
-                */
-               while (1) {
-                       tx_last = sw_ring[tx_id].last_id;
-
-                       if (sw_ring[tx_last].mbuf) {
-                               if (txr[tx_last].wb.status &
-                                               E1000_TXD_STAT_DD) {
-                                       /*
-                                        * Increment the number of packets
-                                        * freed.
-                                        */
-                                       count++;
-
-                                       /* Get the start of the next packet. */
-                                       tx_next = sw_ring[tx_last].next_id;
-
-                                       /*
-                                        * Loop through all segments in a
-                                        * packet.
-                                        */
-                                       do {
-                                               rte_pktmbuf_free_seg(sw_ring[tx_id].mbuf);
+       /* Set the current index to the first. */
+       tx_id = tx_first;
+
+       /* Loop through each packet. For each packet, verify that an
+        * mbuf exists and that the last segment is free. If so, free
+        * it and move on.
+        */
+       while (1) {
+               tx_last = sw_ring[tx_id].last_id;
+
+               if (sw_ring[tx_last].mbuf) {
+                       if (txr[tx_last].wb.status &
+                           E1000_TXD_STAT_DD) {
+                               /* Increment the number of packets
+                                * freed.
+                                */
+                               count++;
+
+                               /* Get the start of the next packet. */
+                               tx_next = sw_ring[tx_last].next_id;
+
+                               /* Loop through all segments in a
+                                * packet.
+                                */
+                               do {
+                                       if (sw_ring[tx_id].mbuf) {
+                                               rte_pktmbuf_free_seg(
+                                                       sw_ring[tx_id].mbuf);
                                                sw_ring[tx_id].mbuf = NULL;
                                                sw_ring[tx_id].last_id = tx_id;
+                                       }
 
-                                               /* Move to next segemnt. */
-                                               tx_id = sw_ring[tx_id].next_id;
+                                       /* Move to next segemnt. */
+                                       tx_id = sw_ring[tx_id].next_id;
 
-                                       } while (tx_id != tx_next);
+                               } while (tx_id != tx_next);
 
-                                       if (unlikely(count == (int)free_cnt))
-                                               break;
-                               } else
-                                       /*
-                                        * mbuf still in use, nothing left to
-                                        * free.
-                                        */
+                               if (unlikely(count == (int)free_cnt))
                                        break;
                        } else {
-                               /*
-                                * There are multiple reasons to be here:
-                                * 1) All the packets on the ring have been
-                                *    freed - tx_id is equal to tx_first
-                                *    and some packets have been freed.
-                                *    - Done, exit
-                                * 2) Interfaces has not sent a rings worth of
-                                *    packets yet, so the segment after tail is
-                                *    still empty. Or a previous call to this
-                                *    function freed some of the segments but
-                                *    not all so there is a hole in the list.
-                                *    Hopefully this is a rare case.
-                                *    - Walk the list and find the next mbuf. If
-                                *      there isn't one, then done.
+                               /* mbuf still in use, nothing left to
+                                * free.
                                 */
-                               if (likely((tx_id == tx_first) && (count != 0)))
-                                       break;
+                               break;
+                       }
+               } else {
+                       /* There are multiple reasons to be here:
+                        * 1) All the packets on the ring have been
+                        *    freed - tx_id is equal to tx_first
+                        *    and some packets have been freed.
+                        *    - Done, exit
+                        * 2) Interfaces has not sent a rings worth of
+                        *    packets yet, so the segment after tail is
+                        *    still empty. Or a previous call to this
+                        *    function freed some of the segments but
+                        *    not all so there is a hole in the list.
+                        *    Hopefully this is a rare case.
+                        *    - Walk the list and find the next mbuf. If
+                        *      there isn't one, then done.
+                        */
+                       if (likely(tx_id == tx_first && count != 0))
+                               break;
 
-                               /*
-                                * Walk the list and find the next mbuf, if any.
-                                */
-                               do {
-                                       /* Move to next segemnt. */
-                                       tx_id = sw_ring[tx_id].next_id;
+                       /* Walk the list and find the next mbuf, if any. */
+                       do {
+                               /* Move to next segemnt. */
+                               tx_id = sw_ring[tx_id].next_id;
 
-                                       if (sw_ring[tx_id].mbuf)
-                                               break;
+                               if (sw_ring[tx_id].mbuf)
+                                       break;
 
-                               } while (tx_id != tx_first);
+                       } while (tx_id != tx_first);
 
-                               /*
-                                * Determine why previous loop bailed. If there
-                                * is not an mbuf, done.
-                                */
-                               if (sw_ring[tx_id].mbuf == NULL)
-                                       break;
-                       }
+                       /* Determine why previous loop bailed. If there
+                        * is not an mbuf, done.
+                        */
+                       if (!sw_ring[tx_id].mbuf)
+                               break;
                }
-       } else
-               count = -ENODEV;
+       }
 
        return count;
 }
@@ -1637,8 +1630,10 @@ uint64_t
 igb_get_rx_port_offloads_capa(struct rte_eth_dev *dev)
 {
        uint64_t rx_offload_capa;
+       struct e1000_hw *hw;
+
+       hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
-       RTE_SET_USED(dev);
        rx_offload_capa = DEV_RX_OFFLOAD_VLAN_STRIP  |
                          DEV_RX_OFFLOAD_VLAN_FILTER |
                          DEV_RX_OFFLOAD_IPV4_CKSUM  |
@@ -1649,6 +1644,11 @@ igb_get_rx_port_offloads_capa(struct rte_eth_dev *dev)
                          DEV_RX_OFFLOAD_SCATTER     |
                          DEV_RX_OFFLOAD_RSS_HASH;
 
+       if (hw->mac.type == e1000_i350 ||
+           hw->mac.type == e1000_i210 ||
+           hw->mac.type == e1000_i211)
+               rx_offload_capa |= DEV_RX_OFFLOAD_VLAN_EXTEND;
+
        return rx_offload_capa;
 }
 
@@ -1884,12 +1884,14 @@ igb_dev_free_queues(struct rte_eth_dev *dev)
        for (i = 0; i < dev->data->nb_rx_queues; i++) {
                eth_igb_rx_queue_release(dev->data->rx_queues[i]);
                dev->data->rx_queues[i] = NULL;
+               rte_eth_dma_zone_free(dev, "rx_ring", i);
        }
        dev->data->nb_rx_queues = 0;
 
        for (i = 0; i < dev->data->nb_tx_queues; i++) {
                eth_igb_tx_queue_release(dev->data->tx_queues[i]);
                dev->data->tx_queues[i] = NULL;
+               rte_eth_dma_zone_free(dev, "tx_ring", i);
        }
        dev->data->nb_tx_queues = 0;
 }
@@ -2340,15 +2342,18 @@ eth_igb_rx_init(struct rte_eth_dev *dev)
         * Configure support of jumbo frames, if any.
         */
        if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
+               uint32_t max_len = dev->data->dev_conf.rxmode.max_rx_pkt_len;
+
                rctl |= E1000_RCTL_LPE;
 
                /*
                 * Set maximum packet length by default, and might be updated
                 * together with enabling/disabling dual VLAN.
                 */
-               E1000_WRITE_REG(hw, E1000_RLPML,
-                       dev->data->dev_conf.rxmode.max_rx_pkt_len +
-                                               VLAN_TAG_SIZE);
+               if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_EXTEND)
+                       max_len += VLAN_TAG_SIZE;
+
+               E1000_WRITE_REG(hw, E1000_RLPML, max_len);
        } else
                rctl &= ~E1000_RCTL_LPE;