net/enic: move PCI device ids to the driver
[dpdk.git] / drivers / net / enic / enic_ethdev.c
index 697ff82..3c87b49 100644 (file)
 /*
  * The set of PCI devices this driver supports
  */
+#define CISCO_PCI_VENDOR_ID 0x1137
 static const struct rte_pci_id pci_id_enic_map[] = {
-#define RTE_PCI_DEV_ID_DECL_ENIC(vend, dev) {RTE_PCI_DEVICE(vend, dev)},
-#ifndef PCI_VENDOR_ID_CISCO
-#define PCI_VENDOR_ID_CISCO    0x1137
-#endif
-#include "rte_pci_dev_ids.h"
-RTE_PCI_DEV_ID_DECL_ENIC(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_VIC_ENET)
-RTE_PCI_DEV_ID_DECL_ENIC(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_VIC_ENET_VF)
-{.vendor_id = 0, /* Sentinal */},
+       { RTE_PCI_DEVICE(CISCO_PCI_VENDOR_ID, PCI_DEVICE_ID_CISCO_VIC_ENET) },
+       { RTE_PCI_DEVICE(CISCO_PCI_VENDOR_ID, PCI_DEVICE_ID_CISCO_VIC_ENET_VF) },
+       {.vendor_id = 0, /* sentinel */},
 };
 
 static int
@@ -269,14 +265,18 @@ static int enicpmd_dev_rx_queue_setup(struct rte_eth_dev *eth_dev,
        struct enic *enic = pmd_priv(eth_dev);
 
        ENICPMD_FUNC_TRACE();
-       if (queue_idx >= ENIC_RQ_MAX) {
+       /* With Rx scatter support, two RQs are now used on VIC per RQ used
+        * by the application.
+        */
+       if (queue_idx * 2 >= ENIC_RQ_MAX) {
                dev_err(enic,
-                       "Max number of RX queues exceeded.  Max is %d\n",
+                       "Max number of RX queues exceeded.  Max is %d. This PMD uses 2 RQs on VIC per RQ used by DPDK.\n",
                        ENIC_RQ_MAX);
                return -EINVAL;
        }
 
-       eth_dev->data->rx_queues[queue_idx] = (void *)&enic->rq[queue_idx];
+       eth_dev->data->rx_queues[queue_idx] =
+               (void *)&enic->rq[enic_sop_rq(queue_idx)];
 
        ret = enic_alloc_rq(enic, queue_idx, socket_id, mp, nb_desc);
        if (ret) {
@@ -432,10 +432,12 @@ static void enicpmd_dev_info_get(struct rte_eth_dev *eth_dev,
        struct enic *enic = pmd_priv(eth_dev);
 
        ENICPMD_FUNC_TRACE();
-       device_info->max_rx_queues = enic->rq_count;
-       device_info->max_tx_queues = enic->wq_count;
+       /* Scattered Rx uses two receive queues per rx queue exposed to dpdk */
+       device_info->max_rx_queues = enic->conf_rq_count / 2;
+       device_info->max_tx_queues = enic->conf_wq_count;
        device_info->min_rx_bufsize = ENIC_MIN_MTU;
-       device_info->max_rx_pktlen = enic->config.mtu;
+       device_info->max_rx_pktlen = enic->rte_dev->data->mtu
+                                  + ETHER_HDR_LEN + 4;
        device_info->max_mac_addrs = 1;
        device_info->rx_offload_capa =
                DEV_RX_OFFLOAD_VLAN_STRIP |
@@ -455,8 +457,12 @@ static void enicpmd_dev_info_get(struct rte_eth_dev *eth_dev,
 static const uint32_t *enicpmd_dev_supported_ptypes_get(struct rte_eth_dev *dev)
 {
        static const uint32_t ptypes[] = {
-               RTE_PTYPE_L3_IPV4,
-               RTE_PTYPE_L3_IPV6,
+               RTE_PTYPE_L3_IPV4_EXT_UNKNOWN,
+               RTE_PTYPE_L3_IPV6_EXT_UNKNOWN,
+               RTE_PTYPE_L4_TCP,
+               RTE_PTYPE_L4_UDP,
+               RTE_PTYPE_L4_FRAG,
+               RTE_PTYPE_L4_NONFRAG,
                RTE_PTYPE_UNKNOWN
        };
 
@@ -519,6 +525,14 @@ static void enicpmd_remove_mac_addr(struct rte_eth_dev *eth_dev, __rte_unused ui
        enic_del_mac_address(enic);
 }
 
+static int enicpmd_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu)
+{
+       struct enic *enic = pmd_priv(eth_dev);
+
+       ENICPMD_FUNC_TRACE();
+       return enic_set_mtu(enic, mtu);
+}
+
 static const struct eth_dev_ops enicpmd_eth_dev_ops = {
        .dev_configure        = enicpmd_dev_configure,
        .dev_start            = enicpmd_dev_start,
@@ -536,7 +550,7 @@ static const struct eth_dev_ops enicpmd_eth_dev_ops = {
        .queue_stats_mapping_set = NULL,
        .dev_infos_get        = enicpmd_dev_info_get,
        .dev_supported_ptypes_get = enicpmd_dev_supported_ptypes_get,
-       .mtu_set              = NULL,
+       .mtu_set              = enicpmd_mtu_set,
        .vlan_filter_set      = enicpmd_vlan_filter_set,
        .vlan_tpid_set        = NULL,
        .vlan_offload_set     = enicpmd_vlan_offload_set,
@@ -619,4 +633,5 @@ static struct rte_driver rte_enic_driver = {
        .init = rte_enic_pmd_init,
 };
 
-PMD_REGISTER_DRIVER(rte_enic_driver);
+PMD_REGISTER_DRIVER(rte_enic_driver, enic);
+DRIVER_REGISTER_PCI_TABLE(enic, pci_id_enic_map);