ethdev: remove useless parameter in callback process

[dpdk.git] / drivers / net / fm10k / fm10k_ethdev.c

diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
index 4495473..cf8cc6a 100644 (file)
--- a/drivers/net/fm10k/fm10k_ethdev.c
+++ b/drivers/net/fm10k/fm10k_ethdev.c
@@ -25,7 +25,7 @@
 /* Wait interval to get switch status */
 #define WAIT_SWITCH_MSG_US    100000
 /* A period of quiescence for switch */
-#define FM10K_SWITCH_QUIESCE_US 10000
+#define FM10K_SWITCH_QUIESCE_US 100000
 /* Number of chars per uint32 type */
 #define CHARS_PER_UINT32 (sizeof(uint32_t))
 #define BIT_MASK_PER_UINT32 ((1 << CHARS_PER_UINT32) - 1)
@@ -40,6 +40,9 @@
 #define GLORT_FD_MASK    GLORT_PF_MASK
 #define GLORT_FD_INDEX   GLORT_FD_Q_BASE
 
+int fm10k_logtype_init;
+int fm10k_logtype_driver;
+
 static void fm10k_close_mbx_service(struct fm10k_hw *hw);
 static void fm10k_dev_promiscuous_enable(struct rte_eth_dev *dev);
 static void fm10k_dev_promiscuous_disable(struct rte_eth_dev *dev);
@@ -504,9 +507,8 @@ fm10k_dev_rss_configure(struct rte_eth_dev *dev)
                0x6A, 0x42, 0xB7, 0x3B, 0xBE, 0xAC, 0x01, 0xFA,
        };
 
-       if (dev->data->nb_rx_queues == 1 ||
-           dev_conf->rxmode.mq_mode != ETH_MQ_RX_RSS ||
-           dev_conf->rx_adv_conf.rss_conf.rss_hf == 0) {
+       if (dev_conf->rxmode.mq_mode != ETH_MQ_RX_RSS ||
+               dev_conf->rx_adv_conf.rss_conf.rss_hf == 0) {
                FM10K_WRITE_REG(hw, FM10K_MRQC(0), 0);
                return;
        }
@@ -1213,7 +1215,7 @@ fm10k_dev_close(struct rte_eth_dev *dev)
                MAX_LPORT_NUM, false);
        fm10k_mbx_unlock(hw);
 
-       /* allow 10ms for device to quiesce */
+       /* allow 100ms for device to quiesce */
        rte_delay_us(FM10K_SWITCH_QUIESCE_US);
 
        /* Stop mailbox service first */
@@ -2596,7 +2598,7 @@ fm10k_dev_interrupt_handler_pf(void *param)
                        dev_info->sm_down = 0;
                        _rte_eth_dev_callback_process(dev,
                                        RTE_ETH_EVENT_INTR_LSC,
-                                       NULL, NULL);
+                                       NULL);
                }
        }
 
@@ -2609,7 +2611,7 @@ fm10k_dev_interrupt_handler_pf(void *param)
                PMD_INIT_LOG(INFO, "INT: Switch is down");
                dev_info->sm_down = 1;
                _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC,
-                               NULL, NULL);
+                               NULL);
        }
 
        /* Handle SRAM error */
@@ -2677,7 +2679,7 @@ fm10k_dev_interrupt_handler_vf(void *param)
                /* Setting reset flag */
                dev_info->sm_down = 1;
                _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC,
-                               NULL, NULL);
+                               NULL);
        }
 
        if (dev_info->sm_down == 1 &&
@@ -2706,7 +2708,7 @@ fm10k_dev_interrupt_handler_vf(void *param)
 
                dev_info->sm_down = 0;
                _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC,
-                               NULL, NULL);
+                               NULL);
        }
 
        /* Re-enable interrupt from device side */
@@ -3234,3 +3236,15 @@ static struct rte_pci_driver rte_pmd_fm10k = {
 RTE_PMD_REGISTER_PCI(net_fm10k, rte_pmd_fm10k);
 RTE_PMD_REGISTER_PCI_TABLE(net_fm10k, pci_id_fm10k_map);
 RTE_PMD_REGISTER_KMOD_DEP(net_fm10k, "* igb_uio | uio_pci_generic | vfio-pci");
+
+RTE_INIT(fm10k_init_log);
+static void
+fm10k_init_log(void)
+{
+       fm10k_logtype_init = rte_log_register("pmd.fm10k.init");
+       if (fm10k_logtype_init >= 0)
+               rte_log_set_level(fm10k_logtype_init, RTE_LOG_NOTICE);
+       fm10k_logtype_driver = rte_log_register("pmd.fm10k.driver");
+       if (fm10k_logtype_driver >= 0)
+               rte_log_set_level(fm10k_logtype_driver, RTE_LOG_NOTICE);
+}