/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2018-2019 Hisilicon Limited.
+ * Copyright(c) 2018-2021 HiSilicon Limited.
*/
#ifndef _HNS3_ETHDEV_H_
#define _HNS3_ETHDEV_H_
#include <sys/time.h>
-#include <rte_alarm.h>
+#include <ethdev_driver.h>
+#include <rte_byteorder.h>
+#include <rte_io.h>
+#include <rte_spinlock.h>
#include "hns3_cmd.h"
#include "hns3_mbx.h"
#include "hns3_rss.h"
#include "hns3_fdir.h"
#include "hns3_stats.h"
+#include "hns3_tm.h"
/* Vendor ID */
#define PCI_VENDOR_ID_HUAWEI 0x19e5
#define HNS3_SW_SHIFT_AND_DISCARD_MODE 0
#define HNS3_HW_SHIFT_AND_DISCARD_MODE 1
+#define HNS3_UNLIMIT_PROMISC_MODE 0
+#define HNS3_LIMIT_PROMISC_MODE 1
+
+#define HNS3_SPECIAL_PORT_SW_CKSUM_MODE 0
+#define HNS3_SPECIAL_PORT_HW_CKSUM_MODE 1
+
#define HNS3_UC_MACADDR_NUM 128
#define HNS3_VF_UC_MACADDR_NUM 48
#define HNS3_MC_MACADDR_NUM 128
#define HNS3_HIP08_MIN_TX_PKT_LEN 33
#define HNS3_HIP09_MIN_TX_PKT_LEN 9
+#define HNS3_BITS_PER_BYTE 8
+
#define HNS3_4_TCS 4
#define HNS3_8_TCS 8
};
struct hns3_tc_queue_info {
- uint8_t tqp_offset; /* TQP offset from base TQP */
- uint8_t tqp_count; /* Total TQPs */
- uint8_t tc; /* TC index */
+ uint16_t tqp_offset; /* TQP offset from base TQP */
+ uint16_t tqp_count; /* Total TQPs */
+ uint8_t tc; /* TC index */
bool enable; /* If this TC is enable or not */
};
uint16_t umv_space;
};
+struct hns3_set_link_speed_cfg {
+ uint32_t speed;
+ uint8_t duplex : 1;
+ uint8_t autoneg : 1;
+};
+
/* mac media type */
enum hns3_media_type {
HNS3_MEDIA_TYPE_UNKNOWN,
HNS3_MEDIA_TYPE_NONE,
};
+#define HNS3_DEFAULT_QUERY 0
+#define HNS3_ACTIVE_QUERY 1
+
struct hns3_mac {
uint8_t mac_addr[RTE_ETHER_ADDR_LEN];
- bool default_addr_setted; /* whether default addr(mac_addr) is setted */
+ bool default_addr_setted; /* whether default addr(mac_addr) is set */
uint8_t media_type;
uint8_t phy_addr;
uint8_t link_duplex : 1; /* ETH_LINK_[HALF/FULL]_DUPLEX */
uint8_t link_autoneg : 1; /* ETH_LINK_[AUTONEG/FIXED] */
uint8_t link_status : 1; /* ETH_LINK_[DOWN/UP] */
uint32_t link_speed; /* ETH_SPEED_NUM_ */
+ /*
+ * Some firmware versions support only the SFP speed query. In addition
+ * to the SFP speed query, some firmware supports the query of the speed
+ * capability, auto-negotiation capability, and FEC mode, which can be
+ * selected by the 'query_type' filed in the HNS3_OPC_GET_SFP_INFO CMD.
+ * This field is used to record the SFP information query mode.
+ * Value range:
+ * HNS3_DEFAULT_QUERY/HNS3_ACTIVE_QUERY
+ *
+ * - HNS3_DEFAULT_QUERY
+ * Speed obtained is from SFP. When the queried speed changes, the MAC
+ * speed needs to be reconfigured.
+ *
+ * - HNS3_ACTIVE_QUERY
+ * Speed obtained is from MAC. At this time, it is unnecessary for
+ * driver to reconfigured the MAC speed. In addition, more information,
+ * such as, the speed capability, auto-negotiation capability and FEC
+ * mode, can be obtained by the HNS3_OPC_GET_SFP_INFO CMD.
+ */
+ uint8_t query_type;
+ uint32_t supported_speed; /* supported speed for current media type */
+ uint32_t advertising; /* advertised capability in the local part */
+ uint32_t lp_advertising; /* advertised capability in the link partner */
+ uint8_t support_autoneg;
};
struct hns3_fake_queue_data {
* Kernel PF driver use mailbox to inform DPDK VF to do reset, the value
* of the reset level and the one defined in kernel driver should be
* same.
+ *
+ * According to the protocol of PCIe, FLR to a PF resets the PF state as
+ * well as the SR-IOV extended capability including VF Enable which
+ * means that VFs no longer exist.
+ *
+ * In PF FLR, the register state of VF is not reliable, VF's driver
+ * should not access the registers of the VF device.
*/
HNS3_VF_FULL_RESET = 3,
HNS3_FLR_RESET, /* A VF perform FLR reset */
struct hns3_reset_data {
enum hns3_reset_stage stage;
- rte_atomic16_t schedule;
+ uint16_t schedule;
/* Reset flag, covering the entire reset process */
- rte_atomic16_t resetting;
+ uint16_t resetting;
/* Used to disable sending cmds during reset */
- rte_atomic16_t disable_cmd;
+ uint16_t disable_cmd;
/* The reset level being processed */
enum hns3_reset_level level;
/* Reset level set, each bit represents a reset level */
#define HNS3_INTR_MAPPING_VEC_RSV_ONE 0
#define HNS3_INTR_MAPPING_VEC_ALL 1
-#define HNS3_INTR_COALESCE_NON_QL 0
-#define HNS3_INTR_COALESCE_QL 1
-
#define HNS3_INTR_COALESCE_GL_UINT_2US 0
#define HNS3_INTR_COALESCE_GL_UINT_1US 1
+#define HNS3_INTR_QL_NONE 0
+
struct hns3_queue_intr {
/*
* interrupt mapping mode.
* Rx interrupt in enabled.
*/
uint8_t mapping_mode;
- /*
- * interrupt coalesce mode.
- * value range:
- * HNS3_INTR_COALESCE_NON_QL/HNS3_INTR_COALESCE_QL
- *
- * - HNS3_INTR_COALESCE_NON_QL
- * For some versions of hardware network engine, hardware doesn't
- * support QL(quanity limiter) algorithm for interrupt coalesce
- * of queue's interrupt.
- *
- * - HNS3_INTR_COALESCE_QL
- * In this mode, hardware support QL(quanity limiter) algorithm for
- * interrupt coalesce of queue's interrupt.
- */
- uint8_t coalesce_mode;
/*
* The unit of GL(gap limiter) configuration for interrupt coalesce of
* queue's interrupt.
* HNS3_INTR_COALESCE_GL_UINT_2US/HNS3_INTR_COALESCE_GL_UINT_1US
*/
uint8_t gl_unit;
+ /* The max QL(quantity limiter) value */
+ uint16_t int_ql_max;
};
+#define HNS3_TSO_SW_CAL_PSEUDO_H_CSUM 0
+#define HNS3_TSO_HW_CAL_PSEUDO_H_CSUM 1
+
+#define HNS3_PKTS_DROP_STATS_MODE1 0
+#define HNS3_PKTS_DROP_STATS_MODE2 1
+
struct hns3_hw {
struct rte_eth_dev_data *data;
void *io_base;
uint8_t revision; /* PCI revision, low byte of class word */
struct hns3_cmq cmq;
struct hns3_mbx_resp_status mbx_resp; /* mailbox response */
- struct hns3_mbx_arq_ring arq; /* mailbox async rx queue */
- pthread_t irq_thread_id;
struct hns3_mac mac;
unsigned int secondary_cnt; /* Number of secondary processes init'd. */
struct hns3_tqp_stats tqp_stats;
/* Include Mac stats | Rx stats | Tx stats */
struct hns3_mac_stats mac_stats;
+ struct hns3_rx_missed_stats imissed_stats;
+ uint64_t oerror_stats;
uint32_t fw_version;
uint16_t num_msi;
uint8_t num_tc; /* Total number of enabled TCs */
uint8_t hw_tc_map;
- enum hns3_fc_mode current_mode;
- enum hns3_fc_mode requested_mode;
+ enum hns3_fc_mode requested_fc_mode; /* FC mode requested by user */
struct hns3_dcb_info dcb_info;
enum hns3_fc_status current_fc_status; /* current flow control status */
struct hns3_tc_queue_info tc_queue[HNS3_MAX_TC_NUM];
uint32_t min_tx_pkt_len;
struct hns3_queue_intr intr;
-
+ /*
+ * tso mode.
+ * value range:
+ * HNS3_TSO_SW_CAL_PSEUDO_H_CSUM/HNS3_TSO_HW_CAL_PSEUDO_H_CSUM
+ *
+ * - HNS3_TSO_SW_CAL_PSEUDO_H_CSUM
+ * In this mode, because of the hardware constraint, network driver
+ * software need erase the L4 len value of the TCP pseudo header
+ * and recalculate the TCP pseudo header checksum of packets that
+ * need TSO.
+ *
+ * - HNS3_TSO_HW_CAL_PSEUDO_H_CSUM
+ * In this mode, hardware support recalculate the TCP pseudo header
+ * checksum of packets that need TSO, so network driver software
+ * not need to recalculate it.
+ */
+ uint8_t tso_mode;
/*
* vlan mode.
* value range:
* is enabled.
*/
uint8_t vlan_mode;
+ /*
+ * promisc mode.
+ * value range:
+ * HNS3_UNLIMIT_PROMISC_MODE/HNS3_LIMIT_PROMISC_MODE
+ *
+ * - HNS3_UNLIMIT_PROMISC_MODE
+ * In this mode, TX unicast promisc will be configured when promisc
+ * is set, driver can receive all the ingress and outgoing traffic.
+ * In the words, all the ingress packets, all the packets sent from
+ * the PF and other VFs on the same physical port.
+ *
+ * - HNS3_LIMIT_PROMISC_MODE
+ * In this mode, TX unicast promisc is shutdown when promisc mode
+ * is set. So, driver will only receive all the ingress traffic.
+ * The packets sent from the PF and other VFs on the same physical
+ * port won't be copied to the function which has set promisc mode.
+ */
+ uint8_t promisc_mode;
+
+ /*
+ * drop_stats_mode mode.
+ * value range:
+ * HNS3_PKTS_DROP_STATS_MODE1/HNS3_PKTS_DROP_STATS_MODE2
+ *
+ * - HNS3_PKTS_DROP_STATS_MODE1
+ * This mode for kunpeng920. In this mode, port level imissed stats
+ * is supported. It only includes RPU drop stats.
+ *
+ * - HNS3_PKTS_DROP_STATS_MODE2
+ * This mode for kunpeng930. In this mode, imissed stats and oerrors
+ * stats is supported. Function level imissed stats is supported. It
+ * includes RPU drop stats in VF, and includes both RPU drop stats
+ * and SSU drop stats in PF. Oerror stats is also supported in PF.
+ */
+ uint8_t drop_stats_mode;
+
uint8_t max_non_tso_bd_num; /* max BD number of one non-TSO packet */
+ /*
+ * udp checksum mode.
+ * value range:
+ * HNS3_SPECIAL_PORT_HW_CKSUM_MODE/HNS3_SPECIAL_PORT_SW_CKSUM_MODE
+ *
+ * - HNS3_SPECIAL_PORT_SW_CKSUM_MODE
+ * In this mode, HW can not do checksum for special UDP port like
+ * 4789, 4790, 6081 for non-tunnel UDP packets and UDP tunnel
+ * packets without the PKT_TX_TUNEL_MASK in the mbuf. So, PMD need
+ * do the checksum for these packets to avoid a checksum error.
+ *
+ * - HNS3_SPECIAL_PORT_HW_CKSUM_MODE
+ * In this mode, HW does not have the preceding problems and can
+ * directly calculate the checksum of these UDP packets.
+ */
+ uint8_t udp_cksum_mode;
struct hns3_port_base_vlan_config port_base_vlan_cfg;
/*
#define HNS3_FLAG_TC_BASE_SCH_MODE 1
#define HNS3_FLAG_VNET_BASE_SCH_MODE 2
-struct hns3_err_msix_intr_stats {
- uint64_t mac_afifo_tnl_int_cnt;
- uint64_t ppu_mpf_abn_int_st2_msix_cnt;
- uint64_t ssu_port_based_pf_int_cnt;
- uint64_t ppp_pf_abnormal_int_cnt;
- uint64_t ppu_pf_abnormal_int_msix_cnt;
-
- uint64_t imp_tcm_ecc_int_cnt;
- uint64_t cmdq_mem_ecc_int_cnt;
- uint64_t imp_rd_poison_int_cnt;
- uint64_t tqp_int_ecc_int_cnt;
- uint64_t msix_ecc_int_cnt;
- uint64_t ssu_ecc_multi_bit_int_0_cnt;
- uint64_t ssu_ecc_multi_bit_int_1_cnt;
- uint64_t ssu_common_ecc_int_cnt;
- uint64_t igu_int_cnt;
- uint64_t ppp_mpf_abnormal_int_st1_cnt;
- uint64_t ppp_mpf_abnormal_int_st3_cnt;
- uint64_t ppu_mpf_abnormal_int_st1_cnt;
- uint64_t ppu_mpf_abn_int_st2_ras_cnt;
- uint64_t ppu_mpf_abnormal_int_st3_cnt;
- uint64_t tm_sch_int_cnt;
- uint64_t qcn_fifo_int_cnt;
- uint64_t qcn_ecc_int_cnt;
- uint64_t ncsi_ecc_int_cnt;
- uint64_t ssu_port_based_err_int_cnt;
- uint64_t ssu_fifo_overflow_int_cnt;
- uint64_t ssu_ets_tcg_int_cnt;
- uint64_t igu_egu_tnl_int_cnt;
- uint64_t ppu_pf_abnormal_int_ras_cnt;
-};
-
/* vlan entry information. */
struct hns3_user_vlan_table {
LIST_ENTRY(hns3_user_vlan_table) next;
#define HNS3_L2TBL_NUM 4
#define HNS3_L3TBL_NUM 16
#define HNS3_L4TBL_NUM 16
+#define HNS3_OL2TBL_NUM 4
#define HNS3_OL3TBL_NUM 16
#define HNS3_OL4TBL_NUM 16
+#define HNS3_PTYPE_NUM 256
struct hns3_ptype_table {
- uint32_t l2table[HNS3_L2TBL_NUM];
+ /*
+ * The next fields used to calc packet-type by the
+ * L3_ID/L4_ID/OL3_ID/OL4_ID from the Rx descriptor.
+ */
uint32_t l3table[HNS3_L3TBL_NUM];
uint32_t l4table[HNS3_L4TBL_NUM];
- uint32_t inner_l2table[HNS3_L2TBL_NUM];
uint32_t inner_l3table[HNS3_L3TBL_NUM];
uint32_t inner_l4table[HNS3_L4TBL_NUM];
uint32_t ol3table[HNS3_OL3TBL_NUM];
uint32_t ol4table[HNS3_OL4TBL_NUM];
+
+ /*
+ * The next field used to calc packet-type by the PTYPE from the Rx
+ * descriptor, it functions only when firmware report the capability of
+ * HNS3_CAPS_RXD_ADV_LAYOUT_B and driver enabled it.
+ */
+ uint32_t ptype[HNS3_PTYPE_NUM] __rte_cache_min_aligned;
};
+#define HNS3_FIXED_MAX_TQP_NUM_MODE 0
+#define HNS3_FLEX_MAX_TQP_NUM_MODE 1
+
struct hns3_pf {
struct hns3_adapter *adapter;
bool is_main_pf;
uint16_t func_num; /* num functions of this pf, include pf and vfs */
+ /*
+ * tqp_config mode
+ * tqp_config_mode value range:
+ * HNS3_FIXED_MAX_TQP_NUM_MODE,
+ * HNS3_FLEX_MAX_TQP_NUM_MODE
+ *
+ * - HNS3_FIXED_MAX_TQP_NUM_MODE
+ * There is a limitation on the number of pf interrupts available for
+ * on some versions of network engines. In this case, the maximum
+ * queue number of pf can not be greater than the interrupt number,
+ * such as pf of network engine with revision_id 0x21. So the maximum
+ * number of queues must be fixed.
+ *
+ * - HNS3_FLEX_MAX_TQP_NUM_MODE
+ * In this mode, the maximum queue number of pf has not any constraint
+ * and comes from the macro RTE_LIBRTE_HNS3_MAX_TQP_NUM_PER_PF
+ * in the config file. Users can modify the macro according to their
+ * own application scenarios, which is more flexible to use.
+ */
+ uint8_t tqp_config_mode;
+
uint32_t pkt_buf_size; /* Total pf buf size for tx/rx */
uint32_t tx_buf_size; /* Tx buffer size for each TC */
uint32_t dv_buf_size; /* Dv buffer size for each TC */
uint16_t max_umv_size;
uint16_t used_umv_size;
- /* Statistics information for abnormal interrupt */
- struct hns3_err_msix_intr_stats abn_int_stats;
-
bool support_sfp_query;
+ uint32_t fec_mode; /* current FEC mode for ethdev */
+
+ bool ptp_enable;
+
+ /* Stores timestamp of last received packet on dev */
+ uint64_t rx_timestamp;
struct hns3_vtag_cfg vtag_config;
LIST_HEAD(vlan_tbl, hns3_user_vlan_table) vlan_list;
struct hns3_fdir_info fdir; /* flow director info */
LIST_HEAD(counters, hns3_flow_counter) flow_counters;
+
+ struct hns3_tm_conf tm_conf;
+};
+
+enum {
+ HNS3_PF_PUSH_LSC_CAP_NOT_SUPPORTED,
+ HNS3_PF_PUSH_LSC_CAP_SUPPORTED,
+ HNS3_PF_PUSH_LSC_CAP_UNKNOWN
};
struct hns3_vf {
struct hns3_adapter *adapter;
+
+ /* Whether PF support push link status change to VF */
+ uint16_t pf_push_lsc_cap;
+
+ /*
+ * If PF support push link status change, VF still need send request to
+ * get link status in some cases (such as reset recover stage), so use
+ * the req_link_info_cnt to control max request count.
+ */
+ uint16_t req_link_info_cnt;
+
+ uint16_t poll_job_started; /* whether poll job is started */
};
struct hns3_adapter {
struct hns3_vf vf;
};
- bool rx_simple_allowed;
- bool rx_vec_allowed;
- bool tx_simple_allowed;
- bool tx_vec_allowed;
+ uint32_t rx_func_hint;
+ uint32_t tx_func_hint;
struct hns3_ptype_table ptype_tbl __rte_cache_min_aligned;
};
+enum {
+ HNS3_IO_FUNC_HINT_NONE = 0,
+ HNS3_IO_FUNC_HINT_VEC,
+ HNS3_IO_FUNC_HINT_SVE,
+ HNS3_IO_FUNC_HINT_SIMPLE,
+ HNS3_IO_FUNC_HINT_COMMON
+};
+
+#define HNS3_DEVARG_RX_FUNC_HINT "rx_func_hint"
+#define HNS3_DEVARG_TX_FUNC_HINT "tx_func_hint"
+
#define HNS3_DEV_SUPPORT_DCB_B 0x0
#define HNS3_DEV_SUPPORT_COPPER_B 0x1
#define HNS3_DEV_SUPPORT_UDP_GSO_B 0x2
-#define HNS3_DEV_SUPPORT_ADQ_B 0x3
+#define HNS3_DEV_SUPPORT_FD_QUEUE_REGION_B 0x3
#define HNS3_DEV_SUPPORT_PTP_B 0x4
#define HNS3_DEV_SUPPORT_TX_PUSH_B 0x5
#define HNS3_DEV_SUPPORT_INDEP_TXRX_B 0x6
#define HNS3_DEV_SUPPORT_STASH_B 0x7
+#define HNS3_DEV_SUPPORT_RXD_ADV_LAYOUT_B 0x9
+#define HNS3_DEV_SUPPORT_OUTER_UDP_CKSUM_B 0xA
#define hns3_dev_dcb_supported(hw) \
hns3_get_bit((hw)->capability, HNS3_DEV_SUPPORT_DCB_B)
#define hns3_dev_udp_gso_supported(hw) \
hns3_get_bit((hw)->capability, HNS3_DEV_SUPPORT_UDP_GSO_B)
-/* Support Application Device Queue */
-#define hns3_dev_adq_supported(hw) \
- hns3_get_bit((hw)->capability, HNS3_DEV_SUPPORT_ADQ_B)
+/* Support the queue region action rule of flow directory */
+#define hns3_dev_fd_queue_region_supported(hw) \
+ hns3_get_bit((hw)->capability, HNS3_DEV_SUPPORT_FD_QUEUE_REGION_B)
/* Support PTP timestamp offload */
#define hns3_dev_ptp_supported(hw) \
#define hns3_dev_stash_supported(hw) \
hns3_get_bit((hw)->capability, HNS3_DEV_SUPPORT_STASH_B)
+#define hns3_dev_rxd_adv_layout_supported(hw) \
+ hns3_get_bit((hw)->capability, HNS3_DEV_SUPPORT_RXD_ADV_LAYOUT_B)
+
+#define hns3_dev_outer_udp_cksum_supported(hw) \
+ hns3_get_bit((hw)->capability, HNS3_DEV_SUPPORT_OUTER_UDP_CKSUM_B)
+
#define HNS3_DEV_PRIVATE_TO_HW(adapter) \
(&((struct hns3_adapter *)adapter)->hw)
-#define HNS3_DEV_PRIVATE_TO_ADAPTER(adapter) \
- ((struct hns3_adapter *)adapter)
#define HNS3_DEV_PRIVATE_TO_PF(adapter) \
(&((struct hns3_adapter *)adapter)->pf)
-#define HNS3VF_DEV_PRIVATE_TO_VF(adapter) \
+#define HNS3_DEV_PRIVATE_TO_VF(adapter) \
(&((struct hns3_adapter *)adapter)->vf)
#define HNS3_DEV_HW_TO_ADAPTER(hw) \
container_of(hw, struct hns3_adapter, hw)
+static inline struct hns3_pf *HNS3_DEV_HW_TO_PF(struct hns3_hw *hw)
+{
+ struct hns3_adapter *adapter = HNS3_DEV_HW_TO_ADAPTER(hw);
+ return &adapter->pf;
+}
+
+static inline struct hns3_vf *HNS3_DEV_HW_TO_VF(struct hns3_hw *hw)
+{
+ struct hns3_adapter *adapter = HNS3_DEV_HW_TO_ADAPTER(hw);
+ return &adapter->vf;
+}
+
#define hns3_set_field(origin, mask, shift, val) \
do { \
(origin) &= (~(mask)); \
#define hns3_get_bit(origin, shift) \
hns3_get_field((origin), (0x1UL << (shift)), (shift))
+#define hns3_gen_field_val(mask, shift, val) (((val) << (shift)) & (mask))
+
/*
* upper_32_bits - return bits 32-63 of a number
* A basic shift-right of a 64- or 32-bit quantity. Use this to suppress
#define BIT(nr) (1UL << (nr))
+#define BIT_ULL(x) (1ULL << (x))
+
#define BITS_PER_LONG (__SIZEOF_LONG__ * 8)
#define GENMASK(h, l) \
(((~0UL) << (l)) & (~0UL >> (BITS_PER_LONG - 1 - (h))))
#define hns3_read_dev(a, reg) \
hns3_read_reg((a)->io_base, (reg))
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#define ARRAY_SIZE(x) RTE_DIM(x)
#define NEXT_ITEM_OF_ACTION(act, actions, index) \
do { \
}
int hns3_buffer_alloc(struct hns3_hw *hw);
-int hns3_dev_filter_ctrl(struct rte_eth_dev *dev,
- enum rte_filter_type filter_type,
- enum rte_filter_op filter_op, void *arg);
+int hns3_dev_flow_ops_get(struct rte_eth_dev *dev,
+ const struct rte_flow_ops **ops);
bool hns3_is_reset_pending(struct hns3_adapter *hns);
bool hns3vf_is_reset_pending(struct hns3_adapter *hns);
-void hns3_update_link_status(struct hns3_hw *hw);
+void hns3_update_linkstatus_and_event(struct hns3_hw *hw, bool query);
+void hns3_ether_format_addr(char *buf, uint16_t size,
+ const struct rte_ether_addr *ether_addr);
+int hns3_dev_infos_get(struct rte_eth_dev *eth_dev,
+ struct rte_eth_dev_info *info);
+void hns3vf_update_link_status(struct hns3_hw *hw, uint8_t link_status,
+ uint32_t link_speed, uint8_t link_duplex);
+void hns3_parse_devargs(struct rte_eth_dev *dev);
+void hns3vf_update_push_lsc_cap(struct hns3_hw *hw, bool supported);
+int hns3_restore_ptp(struct hns3_adapter *hns);
+int hns3_mbuf_dyn_rx_timestamp_register(struct rte_eth_dev *dev,
+ struct rte_eth_conf *conf);
+int hns3_ptp_init(struct hns3_hw *hw);
+int hns3_timesync_enable(struct rte_eth_dev *dev);
+int hns3_timesync_disable(struct rte_eth_dev *dev);
+int hns3_timesync_read_rx_timestamp(struct rte_eth_dev *dev,
+ struct timespec *timestamp,
+ uint32_t flags __rte_unused);
+int hns3_timesync_read_tx_timestamp(struct rte_eth_dev *dev,
+ struct timespec *timestamp);
+int hns3_timesync_read_time(struct rte_eth_dev *dev, struct timespec *ts);
+int hns3_timesync_write_time(struct rte_eth_dev *dev,
+ const struct timespec *ts);
+int hns3_timesync_adjust_time(struct rte_eth_dev *dev, int64_t delta);
static inline bool
is_reset_pending(struct hns3_adapter *hns)
git.droids-corp.org / dpdk.git / blobdiff