static int ixgbe_dev_interrupt_action(struct rte_eth_dev *dev);
static void ixgbe_dev_interrupt_handler(void *param);
static void ixgbe_dev_interrupt_delayed_handler(void *param);
-static void ixgbe_dev_setup_link_alarm_handler(void *param);
+static void *ixgbe_dev_setup_link_thread_handler(void *param);
+static int ixgbe_dev_wait_setup_link_complete(struct rte_eth_dev *dev,
+ uint32_t timeout_ms);
static int ixgbe_add_rar(struct rte_eth_dev *dev,
struct rte_ether_addr *mac_addr,
struct rte_eth_udp_tunnel *udp_tunnel);
static int ixgbe_filter_restore(struct rte_eth_dev *dev);
static void ixgbe_l2_tunnel_conf(struct rte_eth_dev *dev);
+static int ixgbe_wait_for_link_up(struct ixgbe_hw *hw);
/*
* Define VF Stats MACRO for Non "cleared on read" register
int ixgbe_logtype_init;
int ixgbe_logtype_driver;
+#ifdef RTE_LIBRTE_IXGBE_DEBUG_RX
+int ixgbe_logtype_rx;
+#endif
+#ifdef RTE_LIBRTE_IXGBE_DEBUG_TX
+int ixgbe_logtype_tx;
+#endif
+#ifdef RTE_LIBRTE_IXGBE_DEBUG_TX_FREE
+int ixgbe_logtype_tx_free;
+#endif
+
/*
* The set of PCI devices this driver supports
*/
.udp_tunnel_port_add = ixgbe_dev_udp_tunnel_port_add,
.udp_tunnel_port_del = ixgbe_dev_udp_tunnel_port_del,
.tm_ops_get = ixgbe_tm_ops_get,
+ .tx_done_cleanup = ixgbe_dev_tx_done_cleanup,
};
/*
.reta_query = ixgbe_dev_rss_reta_query,
.rss_hash_update = ixgbe_dev_rss_hash_update,
.rss_hash_conf_get = ixgbe_dev_rss_hash_conf_get,
+ .tx_done_cleanup = ixgbe_dev_tx_done_cleanup,
};
/* store statistics names and its offset in stats structure */
static int
eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
{
+ struct ixgbe_adapter *ad = eth_dev->data->dev_private;
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
struct ixgbe_hw *hw =
PMD_INIT_FUNC_TRACE();
+ ixgbe_dev_macsec_setting_reset(eth_dev);
+
eth_dev->dev_ops = &ixgbe_eth_dev_ops;
eth_dev->rx_pkt_burst = &ixgbe_recv_pkts;
eth_dev->tx_pkt_burst = &ixgbe_xmit_pkts;
return 0;
}
+ rte_atomic32_clear(&ad->link_thread_running);
rte_eth_copy_pci_info(eth_dev, pci_dev);
/* Vendor and Device ID need to be set before init of shared code */
memset(dcb_config, 0, sizeof(struct ixgbe_dcb_config));
ixgbe_dcb_init(hw, dcb_config);
/* Get Hardware Flow Control setting */
- hw->fc.requested_mode = ixgbe_fc_full;
- hw->fc.current_mode = ixgbe_fc_full;
+ hw->fc.requested_mode = ixgbe_fc_none;
+ hw->fc.current_mode = ixgbe_fc_none;
hw->fc.pause_time = IXGBE_FC_PAUSE;
for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
hw->fc.low_water[i] = IXGBE_FC_LO;
diag = ixgbe_bypass_init_hw(hw);
#else
diag = ixgbe_init_hw(hw);
+ hw->mac.autotry_restart = false;
#endif /* RTE_LIBRTE_IXGBE_BYPASS */
/*
/* enable support intr */
ixgbe_enable_intr(eth_dev);
+ ixgbe_dev_set_link_down(eth_dev);
+
/* initialize filter info */
memset(filter_info, 0,
sizeof(struct ixgbe_filter_info));
{
int diag;
uint32_t tc, tcs;
+ struct ixgbe_adapter *ad = eth_dev->data->dev_private;
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
struct ixgbe_hw *hw =
return 0;
}
+ rte_atomic32_clear(&ad->link_thread_running);
ixgbevf_parse_devargs(eth_dev->data->dev_private,
pci_dev->device.devargs);
ethdev = rte_eth_dev_allocated(pci_dev->device.name);
if (!ethdev)
- return -ENODEV;
+ return 0;
if (ethdev->data->dev_flags & RTE_ETH_DEV_REPRESENTOR)
- return rte_eth_dev_destroy(ethdev, ixgbe_vf_representor_uninit);
+ return rte_eth_dev_pci_generic_remove(pci_dev,
+ ixgbe_vf_representor_uninit);
else
- return rte_eth_dev_destroy(ethdev, eth_ixgbe_dev_uninit);
+ return rte_eth_dev_pci_generic_remove(pci_dev,
+ eth_ixgbe_dev_uninit);
}
static struct rte_pci_driver rte_ixgbe_pmd = {
int ret;
PMD_INIT_FUNC_TRACE();
+
+ if (dev->data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_RSS_FLAG)
+ dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_RSS_HASH;
+
/* multipe queue mode checking */
ret = ixgbe_check_mq_mode(dev);
if (ret != 0) {
return 0;
}
+static int
+ixgbe_flow_ctrl_enable(struct rte_eth_dev *dev, struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = dev->data->dev_private;
+ int err;
+ uint32_t mflcn;
+
+ err = ixgbe_fc_enable(hw);
+
+ /* Not negotiated is not an error case */
+ if (err == IXGBE_SUCCESS || err == IXGBE_ERR_FC_NOT_NEGOTIATED) {
+ /*
+ *check if we want to forward MAC frames - driver doesn't
+ *have native capability to do that,
+ *so we'll write the registers ourselves
+ */
+
+ mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+
+ /* set or clear MFLCN.PMCF bit depending on configuration */
+ if (adapter->mac_ctrl_frame_fwd != 0)
+ mflcn |= IXGBE_MFLCN_PMCF;
+ else
+ mflcn &= ~IXGBE_MFLCN_PMCF;
+
+ IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+ }
+ return err;
+}
+
/*
* Configure device link speed and setup link.
* It returns 0 on success.
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
uint32_t intr_vector = 0;
- int err, link_up = 0, negotiate = 0;
+ int err;
+ bool link_up = false, negotiate = 0;
uint32_t speed = 0;
uint32_t allowed_speeds = 0;
int mask = 0;
uint32_t *link_speeds;
struct ixgbe_tm_conf *tm_conf =
IXGBE_DEV_PRIVATE_TO_TM_CONF(dev->data->dev_private);
+ struct ixgbe_macsec_setting *macsec_setting =
+ IXGBE_DEV_PRIVATE_TO_MACSEC_SETTING(dev->data->dev_private);
PMD_INIT_FUNC_TRACE();
- /* IXGBE devices don't support:
- * - half duplex (checked afterwards for valid speeds)
- * - fixed speed: TODO implement
- */
- if (dev->data->dev_conf.link_speeds & ETH_LINK_SPEED_FIXED) {
- PMD_INIT_LOG(ERR,
- "Invalid link_speeds for port %u, fix speed not supported",
- dev->data->port_id);
- return -EINVAL;
- }
-
/* Stop the link setup handler before resetting the HW. */
- rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+ ixgbe_dev_wait_setup_link_complete(dev, 0);
/* disable uio/vfio intr/eventfd mapping */
rte_intr_disable(intr_handle);
ixgbe_restore_statistics_mapping(dev);
+ err = ixgbe_flow_ctrl_enable(dev, hw);
+ if (err < 0) {
+ PMD_INIT_LOG(ERR, "enable flow ctrl err");
+ goto error;
+ }
+
err = ixgbe_dev_rxtx_start(dev);
if (err < 0) {
PMD_INIT_LOG(ERR, "Unable to start rxtx queues");
}
link_speeds = &dev->data->dev_conf.link_speeds;
- if (*link_speeds & ~allowed_speeds) {
+
+ /* Ignore autoneg flag bit and check the validity of
+ * link_speed
+ */
+ if (((*link_speeds) >> 1) & ~(allowed_speeds >> 1)) {
PMD_INIT_LOG(ERR, "Invalid link setting");
goto error;
}
"please call hierarchy_commit() "
"before starting the port");
+ /* wait for the controller to acquire link */
+ err = ixgbe_wait_for_link_up(hw);
+ if (err)
+ goto error;
+
/*
* Update link status right before return, because it may
* start link configuration process in a separate thread.
*/
ixgbe_dev_link_update(dev, 0);
+ /* setup the macsec setting register */
+ if (macsec_setting->offload_en)
+ ixgbe_dev_macsec_register_enable(dev, macsec_setting);
+
return 0;
error:
PMD_INIT_FUNC_TRACE();
- rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+ ixgbe_dev_wait_setup_link_complete(dev, 0);
/* disable interrupts */
ixgbe_disable_intr(hw);
adapter->rss_reta_updated = 0;
+ adapter->mac_ctrl_frame_fwd = 0;
+
hw->adapter_stopped = true;
}
} else {
/* Turn on the laser */
ixgbe_enable_tx_laser(hw);
+ ixgbe_dev_link_update(dev, 0);
}
return 0;
} else {
/* Turn off the laser */
ixgbe_disable_tx_laser(hw);
+ ixgbe_dev_link_update(dev, 0);
}
return 0;
do {
ret = rte_intr_callback_unregister(intr_handle,
ixgbe_dev_interrupt_handler, dev);
- if (ret >= 0) {
+ if (ret >= 0 || ret == -ENOENT) {
break;
} else if (ret != -EAGAIN) {
PMD_INIT_LOG(ERR,
dev->rx_pkt_burst == ixgbe_recv_pkts_bulk_alloc)
return ptypes;
-#if defined(RTE_ARCH_X86)
+#if defined(RTE_ARCH_X86) || defined(RTE_MACHINE_CPUFLAG_NEON)
if (dev->rx_pkt_burst == ixgbe_recv_pkts_vec ||
dev->rx_pkt_burst == ixgbe_recv_scattered_pkts_vec)
return ptypes;
static int
ixgbevf_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
- int *link_up, int wait_to_complete)
+ bool *link_up, int wait_to_complete)
{
struct ixgbe_adapter *adapter = container_of(hw,
struct ixgbe_adapter, hw);
return ret_val;
}
-static void
-ixgbe_dev_setup_link_alarm_handler(void *param)
+/*
+ * If @timeout_ms was 0, it means that it will not return until link complete.
+ * It returns 1 on complete, return 0 on timeout.
+ */
+static int
+ixgbe_dev_wait_setup_link_complete(struct rte_eth_dev *dev, uint32_t timeout_ms)
+{
+#define WARNING_TIMEOUT 9000 /* 9s in total */
+ struct ixgbe_adapter *ad = dev->data->dev_private;
+ uint32_t timeout = timeout_ms ? timeout_ms : WARNING_TIMEOUT;
+
+ while (rte_atomic32_read(&ad->link_thread_running)) {
+ msec_delay(1);
+ timeout--;
+
+ if (timeout_ms) {
+ if (!timeout)
+ return 0;
+ } else if (!timeout) {
+ /* It will not return until link complete */
+ timeout = WARNING_TIMEOUT;
+ PMD_DRV_LOG(ERR, "IXGBE link thread not complete too long time!");
+ }
+ }
+
+ return 1;
+}
+
+static void *
+ixgbe_dev_setup_link_thread_handler(void *param)
{
struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+ struct ixgbe_adapter *ad = dev->data->dev_private;
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct ixgbe_interrupt *intr =
IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
u32 speed;
bool autoneg = false;
+ pthread_detach(pthread_self());
speed = hw->phy.autoneg_advertised;
if (!speed)
ixgbe_get_link_capabilities(hw, &speed, &autoneg);
ixgbe_setup_link(hw, speed, true);
intr->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
+ rte_atomic32_clear(&ad->link_thread_running);
+ return NULL;
+}
+
+/*
+ * In freebsd environment, nic_uio drivers do not support interrupts,
+ * rte_intr_callback_register() will fail to register interrupts.
+ * We can not make link status to change from down to up by interrupt
+ * callback. So we need to wait for the controller to acquire link
+ * when ports start.
+ * It returns 0 on link up.
+ */
+static int
+ixgbe_wait_for_link_up(struct ixgbe_hw *hw)
+{
+#ifdef RTE_EXEC_ENV_FREEBSD
+ int err, i;
+ bool link_up = false;
+ uint32_t speed = 0;
+ const int nb_iter = 25;
+
+ for (i = 0; i < nb_iter; i++) {
+ err = ixgbe_check_link(hw, &speed, &link_up, 0);
+ if (err)
+ return err;
+ if (link_up)
+ return 0;
+ msec_delay(200);
+ }
+
+ return 0;
+#else
+ RTE_SET_USED(hw);
+ return 0;
+#endif
}
/* return 0 means link status changed, -1 means not changed */
int wait_to_complete, int vf)
{
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct ixgbe_adapter *ad = dev->data->dev_private;
struct rte_eth_link link;
ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
struct ixgbe_interrupt *intr =
IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
- int link_up;
+ bool link_up;
int diag;
int wait = 1;
+ u32 esdp_reg;
memset(&link, 0, sizeof(link));
link.link_status = ETH_LINK_DOWN;
link.link_speed = ETH_SPEED_NUM_NONE;
link.link_duplex = ETH_LINK_HALF_DUPLEX;
- link.link_autoneg = ETH_LINK_AUTONEG;
+ link.link_autoneg = !(dev->data->dev_conf.link_speeds &
+ ETH_LINK_SPEED_FIXED);
hw->mac.get_link_status = true;
return rte_eth_linkstatus_set(dev, &link);
}
+ if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
+ esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if ((esdp_reg & IXGBE_ESDP_SDP3))
+ link_up = 0;
+ }
+
if (link_up == 0) {
if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
- rte_eal_alarm_set(10,
- ixgbe_dev_setup_link_alarm_handler, dev);
+ ixgbe_dev_wait_setup_link_complete(dev, 0);
+ if (rte_atomic32_test_and_set(&ad->link_thread_running)) {
+ if (rte_ctrl_thread_create(&ad->link_thread_tid,
+ "ixgbe-link-handler",
+ NULL,
+ ixgbe_dev_setup_link_thread_handler,
+ dev) < 0) {
+ PMD_DRV_LOG(ERR,
+ "Create link thread failed!");
+ rte_atomic32_clear(&ad->link_thread_running);
+ }
+ } else {
+ PMD_DRV_LOG(ERR,
+ "Other link thread is running now!");
+ }
}
return rte_eth_linkstatus_set(dev, &link);
}
ixgbe_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
struct ixgbe_hw *hw;
+ struct ixgbe_adapter *adapter = dev->data->dev_private;
int err;
uint32_t rx_buf_size;
uint32_t max_high_water;
- uint32_t mflcn;
enum ixgbe_fc_mode rte_fcmode_2_ixgbe_fcmode[] = {
ixgbe_fc_none,
ixgbe_fc_rx_pause,
hw->fc.low_water[0] = fc_conf->low_water;
hw->fc.send_xon = fc_conf->send_xon;
hw->fc.disable_fc_autoneg = !fc_conf->autoneg;
+ adapter->mac_ctrl_frame_fwd = fc_conf->mac_ctrl_frame_fwd;
- err = ixgbe_fc_enable(hw);
-
- /* Not negotiated is not an error case */
- if ((err == IXGBE_SUCCESS) || (err == IXGBE_ERR_FC_NOT_NEGOTIATED)) {
-
- /* check if we want to forward MAC frames - driver doesn't have native
- * capability to do that, so we'll write the registers ourselves */
-
- mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
-
- /* set or clear MFLCN.PMCF bit depending on configuration */
- if (fc_conf->mac_ctrl_frame_fwd != 0)
- mflcn |= IXGBE_MFLCN_PMCF;
- else
- mflcn &= ~IXGBE_MFLCN_PMCF;
-
- IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
+ err = ixgbe_flow_ctrl_enable(dev, hw);
+ if (err < 0) {
+ PMD_INIT_LOG(ERR, "ixgbe_flow_ctrl_enable = 0x%x", err);
+ return -EIO;
}
-
- PMD_INIT_LOG(ERR, "ixgbe_fc_enable = 0x%x", err);
- return -EIO;
+ return err;
}
/**
PMD_INIT_LOG(DEBUG, "Configured Virtual Function port id: %d",
dev->data->port_id);
+ if (dev->data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_RSS_FLAG)
+ dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_RSS_HASH;
+
/*
* VF has no ability to enable/disable HW CRC
* Keep the persistent behavior the same as Host PF
PMD_INIT_FUNC_TRACE();
/* Stop the link setup handler before resetting the HW. */
- rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+ ixgbe_dev_wait_setup_link_complete(dev, 0);
err = hw->mac.ops.reset_hw(hw);
if (err) {
PMD_INIT_FUNC_TRACE();
- rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+ ixgbe_dev_wait_setup_link_complete(dev, 0);
ixgbevf_intr_disable(dev);
static int
ixgbevf_add_mac_addr(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr,
- __attribute__((unused)) uint32_t index,
- __attribute__((unused)) uint32_t pool)
+ __rte_unused uint32_t index,
+ __rte_unused uint32_t pool)
{
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
int diag;
}
static u8 *
-ixgbe_dev_addr_list_itr(__attribute__((unused)) struct ixgbe_hw *hw,
+ixgbe_dev_addr_list_itr(__rte_unused struct ixgbe_hw *hw,
u8 **mc_addr_ptr, u32 *vmdq)
{
u8 *mc_addr;
return 0;
}
+void
+ixgbe_dev_macsec_setting_save(struct rte_eth_dev *dev,
+ struct ixgbe_macsec_setting *macsec_setting)
+{
+ struct ixgbe_macsec_setting *macsec =
+ IXGBE_DEV_PRIVATE_TO_MACSEC_SETTING(dev->data->dev_private);
+
+ macsec->offload_en = macsec_setting->offload_en;
+ macsec->encrypt_en = macsec_setting->encrypt_en;
+ macsec->replayprotect_en = macsec_setting->replayprotect_en;
+}
+
+void
+ixgbe_dev_macsec_setting_reset(struct rte_eth_dev *dev)
+{
+ struct ixgbe_macsec_setting *macsec =
+ IXGBE_DEV_PRIVATE_TO_MACSEC_SETTING(dev->data->dev_private);
+
+ macsec->offload_en = 0;
+ macsec->encrypt_en = 0;
+ macsec->replayprotect_en = 0;
+}
+
+void
+ixgbe_dev_macsec_register_enable(struct rte_eth_dev *dev,
+ struct ixgbe_macsec_setting *macsec_setting)
+{
+ struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t ctrl;
+ uint8_t en = macsec_setting->encrypt_en;
+ uint8_t rp = macsec_setting->replayprotect_en;
+
+ /**
+ * Workaround:
+ * As no ixgbe_disable_sec_rx_path equivalent is
+ * implemented for tx in the base code, and we are
+ * not allowed to modify the base code in DPDK, so
+ * just call the hand-written one directly for now.
+ * The hardware support has been checked by
+ * ixgbe_disable_sec_rx_path().
+ */
+ ixgbe_disable_sec_tx_path_generic(hw);
+
+ /* Enable Ethernet CRC (required by MACsec offload) */
+ ctrl = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+ ctrl |= IXGBE_HLREG0_TXCRCEN | IXGBE_HLREG0_RXCRCSTRP;
+ IXGBE_WRITE_REG(hw, IXGBE_HLREG0, ctrl);
+
+ /* Enable the TX and RX crypto engines */
+ ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
+ ctrl &= ~IXGBE_SECTXCTRL_SECTX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, ctrl);
+
+ ctrl = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+ ctrl &= ~IXGBE_SECRXCTRL_SECRX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, ctrl);
+
+ ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
+ ctrl &= ~IXGBE_SECTX_MINSECIFG_MASK;
+ ctrl |= 0x3;
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, ctrl);
+
+ /* Enable SA lookup */
+ ctrl = IXGBE_READ_REG(hw, IXGBE_LSECTXCTRL);
+ ctrl &= ~IXGBE_LSECTXCTRL_EN_MASK;
+ ctrl |= en ? IXGBE_LSECTXCTRL_AUTH_ENCRYPT :
+ IXGBE_LSECTXCTRL_AUTH;
+ ctrl |= IXGBE_LSECTXCTRL_AISCI;
+ ctrl &= ~IXGBE_LSECTXCTRL_PNTHRSH_MASK;
+ ctrl |= IXGBE_MACSEC_PNTHRSH & IXGBE_LSECTXCTRL_PNTHRSH_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_LSECTXCTRL, ctrl);
+
+ ctrl = IXGBE_READ_REG(hw, IXGBE_LSECRXCTRL);
+ ctrl &= ~IXGBE_LSECRXCTRL_EN_MASK;
+ ctrl |= IXGBE_LSECRXCTRL_STRICT << IXGBE_LSECRXCTRL_EN_SHIFT;
+ ctrl &= ~IXGBE_LSECRXCTRL_PLSH;
+ if (rp)
+ ctrl |= IXGBE_LSECRXCTRL_RP;
+ else
+ ctrl &= ~IXGBE_LSECRXCTRL_RP;
+ IXGBE_WRITE_REG(hw, IXGBE_LSECRXCTRL, ctrl);
+
+ /* Start the data paths */
+ ixgbe_enable_sec_rx_path(hw);
+ /**
+ * Workaround:
+ * As no ixgbe_enable_sec_rx_path equivalent is
+ * implemented for tx in the base code, and we are
+ * not allowed to modify the base code in DPDK, so
+ * just call the hand-written one directly for now.
+ */
+ ixgbe_enable_sec_tx_path_generic(hw);
+}
+
+void
+ixgbe_dev_macsec_register_disable(struct rte_eth_dev *dev)
+{
+ struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t ctrl;
+
+ /**
+ * Workaround:
+ * As no ixgbe_disable_sec_rx_path equivalent is
+ * implemented for tx in the base code, and we are
+ * not allowed to modify the base code in DPDK, so
+ * just call the hand-written one directly for now.
+ * The hardware support has been checked by
+ * ixgbe_disable_sec_rx_path().
+ */
+ ixgbe_disable_sec_tx_path_generic(hw);
+
+ /* Disable the TX and RX crypto engines */
+ ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
+ ctrl |= IXGBE_SECTXCTRL_SECTX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, ctrl);
+
+ ctrl = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+ ctrl |= IXGBE_SECRXCTRL_SECRX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, ctrl);
+
+ /* Disable SA lookup */
+ ctrl = IXGBE_READ_REG(hw, IXGBE_LSECTXCTRL);
+ ctrl &= ~IXGBE_LSECTXCTRL_EN_MASK;
+ ctrl |= IXGBE_LSECTXCTRL_DISABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_LSECTXCTRL, ctrl);
+
+ ctrl = IXGBE_READ_REG(hw, IXGBE_LSECRXCTRL);
+ ctrl &= ~IXGBE_LSECRXCTRL_EN_MASK;
+ ctrl |= IXGBE_LSECRXCTRL_DISABLE << IXGBE_LSECRXCTRL_EN_SHIFT;
+ IXGBE_WRITE_REG(hw, IXGBE_LSECRXCTRL, ctrl);
+
+ /* Start the data paths */
+ ixgbe_enable_sec_rx_path(hw);
+ /**
+ * Workaround:
+ * As no ixgbe_enable_sec_rx_path equivalent is
+ * implemented for tx in the base code, and we are
+ * not allowed to modify the base code in DPDK, so
+ * just call the hand-written one directly for now.
+ */
+ ixgbe_enable_sec_tx_path_generic(hw);
+}
+
RTE_PMD_REGISTER_PCI(net_ixgbe, rte_ixgbe_pmd);
RTE_PMD_REGISTER_PCI_TABLE(net_ixgbe, pci_id_ixgbe_map);
RTE_PMD_REGISTER_KMOD_DEP(net_ixgbe, "* igb_uio | uio_pci_generic | vfio-pci");
ixgbe_logtype_driver = rte_log_register("pmd.net.ixgbe.driver");
if (ixgbe_logtype_driver >= 0)
rte_log_set_level(ixgbe_logtype_driver, RTE_LOG_NOTICE);
+#ifdef RTE_LIBRTE_IXGBE_DEBUG_RX
+ ixgbe_logtype_rx = rte_log_register("pmd.net.ixgbe.rx");
+ if (ixgbe_logtype_rx >= 0)
+ rte_log_set_level(ixgbe_logtype_rx, RTE_LOG_DEBUG);
+#endif
+
+#ifdef RTE_LIBRTE_IXGBE_DEBUG_TX
+ ixgbe_logtype_tx = rte_log_register("pmd.net.ixgbe.tx");
+ if (ixgbe_logtype_tx >= 0)
+ rte_log_set_level(ixgbe_logtype_tx, RTE_LOG_DEBUG);
+#endif
+
+#ifdef RTE_LIBRTE_IXGBE_DEBUG_TX_FREE
+ ixgbe_logtype_tx_free = rte_log_register("pmd.net.ixgbe.tx_free");
+ if (ixgbe_logtype_tx_free >= 0)
+ rte_log_set_level(ixgbe_logtype_tx_free, RTE_LOG_DEBUG);
+#endif
}
git.droids-corp.org / dpdk.git / blobdiff