net/liquidio: fix uninitialized variable
[dpdk.git] / drivers / net / liquidio / lio_ethdev.c
index 479936a..a3c8e67 100644 (file)
@@ -446,29 +446,64 @@ lio_dev_info_get(struct rte_eth_dev *eth_dev,
 }
 
 static int
-lio_dev_validate_vf_mtu(struct rte_eth_dev *eth_dev, uint16_t new_mtu)
+lio_dev_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu)
 {
        struct lio_device *lio_dev = LIO_DEV(eth_dev);
+       uint16_t pf_mtu = lio_dev->linfo.link.s.mtu;
+       uint32_t frame_len = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
+       struct lio_dev_ctrl_cmd ctrl_cmd;
+       struct lio_ctrl_pkt ctrl_pkt;
 
        PMD_INIT_FUNC_TRACE();
 
        if (!lio_dev->intf_open) {
-               lio_dev_err(lio_dev, "Port %d down, can't check MTU\n",
+               lio_dev_err(lio_dev, "Port %d down, can't set MTU\n",
                            lio_dev->port_id);
                return -EINVAL;
        }
 
-       /* Limit the MTU to make sure the ethernet packets are between
-        * ETHER_MIN_MTU bytes and PF's MTU
+       /* check if VF MTU is within allowed range.
+        * New value should not exceed PF MTU.
         */
-       if ((new_mtu < ETHER_MIN_MTU) ||
-                       (new_mtu > lio_dev->linfo.link.s.mtu)) {
-               lio_dev_err(lio_dev, "Invalid MTU: %d\n", new_mtu);
-               lio_dev_err(lio_dev, "Valid range %d and %d\n",
-                           ETHER_MIN_MTU, lio_dev->linfo.link.s.mtu);
+       if ((mtu < ETHER_MIN_MTU) || (mtu > pf_mtu)) {
+               lio_dev_err(lio_dev, "VF MTU should be >= %d and <= %d\n",
+                           ETHER_MIN_MTU, pf_mtu);
                return -EINVAL;
        }
 
+       /* flush added to prevent cmd failure
+        * incase the queue is full
+        */
+       lio_flush_iq(lio_dev, lio_dev->instr_queue[0]);
+
+       memset(&ctrl_pkt, 0, sizeof(struct lio_ctrl_pkt));
+       memset(&ctrl_cmd, 0, sizeof(struct lio_dev_ctrl_cmd));
+
+       ctrl_cmd.eth_dev = eth_dev;
+       ctrl_cmd.cond = 0;
+
+       ctrl_pkt.ncmd.s.cmd = LIO_CMD_CHANGE_MTU;
+       ctrl_pkt.ncmd.s.param1 = mtu;
+       ctrl_pkt.ctrl_cmd = &ctrl_cmd;
+
+       if (lio_send_ctrl_pkt(lio_dev, &ctrl_pkt)) {
+               lio_dev_err(lio_dev, "Failed to send command to change MTU\n");
+               return -1;
+       }
+
+       if (lio_wait_for_ctrl_cmd(lio_dev, &ctrl_cmd)) {
+               lio_dev_err(lio_dev, "Command to change MTU timed out\n");
+               return -1;
+       }
+
+       if (frame_len > ETHER_MAX_LEN)
+               eth_dev->data->dev_conf.rxmode.jumbo_frame = 1;
+       else
+               eth_dev->data->dev_conf.rxmode.jumbo_frame = 0;
+
+       eth_dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_len;
+       eth_dev->data->mtu = mtu;
+
        return 0;
 }
 
@@ -939,6 +974,7 @@ lio_dev_link_update(struct rte_eth_dev *eth_dev,
        link.link_status = ETH_LINK_DOWN;
        link.link_speed = ETH_SPEED_NUM_NONE;
        link.link_duplex = ETH_LINK_HALF_DUPLEX;
+       link.link_autoneg = ETH_LINK_AUTONEG;
        memset(&old, 0, sizeof(old));
 
        /* Return what we found */
@@ -1333,6 +1369,11 @@ lio_dev_get_link_status(struct rte_eth_dev *eth_dev)
        lio_swap_8B_data((uint64_t *)ls, sizeof(union octeon_link_status) >> 3);
 
        if (lio_dev->linfo.link.link_status64 != ls->link_status64) {
+               if (ls->s.mtu < eth_dev->data->mtu) {
+                       lio_dev_info(lio_dev, "Lowered VF MTU to %d as PF MTU dropped\n",
+                                    ls->s.mtu);
+                       eth_dev->data->mtu = ls->s.mtu;
+               }
                lio_dev->linfo.link.link_status64 = ls->link_status64;
                lio_dev_link_update(eth_dev, 0);
        }
@@ -1404,35 +1445,22 @@ lio_dev_start(struct rte_eth_dev *eth_dev)
 
        if (lio_dev->linfo.link.link_status64 == 0) {
                ret = -1;
-               goto dev_mtu_check_error;
+               goto dev_mtu_set_error;
        }
 
-       if (eth_dev->data->dev_conf.rxmode.jumbo_frame == 1) {
-               if (frame_len <= ETHER_MAX_LEN ||
-                   frame_len > LIO_MAX_RX_PKTLEN) {
-                       lio_dev_err(lio_dev, "max packet length should be >= %d and < %d when jumbo frame is enabled\n",
-                                   ETHER_MAX_LEN, LIO_MAX_RX_PKTLEN);
-                       ret = -EINVAL;
-                       goto dev_mtu_check_error;
-               }
-               mtu = (uint16_t)(frame_len - ETHER_HDR_LEN - ETHER_CRC_LEN);
-       } else {
-               /* default MTU */
-               mtu = ETHER_MTU;
-               eth_dev->data->dev_conf.rxmode.max_rx_pkt_len = ETHER_MAX_LEN;
-       }
+       mtu = (uint16_t)(frame_len - ETHER_HDR_LEN - ETHER_CRC_LEN);
+       if (mtu < ETHER_MIN_MTU)
+               mtu = ETHER_MIN_MTU;
 
-       if (lio_dev->linfo.link.s.mtu != mtu) {
-               ret = lio_dev_validate_vf_mtu(eth_dev, mtu);
+       if (eth_dev->data->mtu != mtu) {
+               ret = lio_dev_mtu_set(eth_dev, mtu);
                if (ret)
-                       goto dev_mtu_check_error;
+                       goto dev_mtu_set_error;
        }
 
-       eth_dev->data->mtu = mtu;
-
        return 0;
 
-dev_mtu_check_error:
+dev_mtu_set_error:
        rte_eal_alarm_cancel(lio_sync_link_state_check, eth_dev);
 
 dev_lsc_handle_error:
@@ -1559,9 +1587,6 @@ lio_dev_close(struct rte_eth_dev *eth_dev)
                rte_write32(pkt_count, droq->pkts_sent_reg);
        }
 
-       /* Do FLR for the VF */
-       cn23xx_vf_ask_pf_to_do_flr(lio_dev);
-
        /* lio_free_mbox */
        lio_dev->fn_list.free_mbox(lio_dev);
 
@@ -1844,6 +1869,7 @@ static const struct eth_dev_ops liovf_eth_dev_ops = {
        .rss_hash_update        = lio_dev_rss_hash_update,
        .udp_tunnel_port_add    = lio_dev_udp_tunnel_add,
        .udp_tunnel_port_del    = lio_dev_udp_tunnel_del,
+       .mtu_set                = lio_dev_mtu_set,
 };
 
 static void
@@ -1929,11 +1955,6 @@ lio_first_time_init(struct lio_device *lio_dev,
        if (cn23xx_pfvf_handshake(lio_dev))
                goto error;
 
-       /* Initial reset */
-       cn23xx_vf_ask_pf_to_do_flr(lio_dev);
-       /* Wait for FLR for 100ms per SRIOV specification */
-       rte_delay_ms(100);
-
        if (cn23xx_vf_set_io_queues_off(lio_dev)) {
                lio_dev_err(lio_dev, "Setting io queues off failed\n");
                goto error;