/* Device parameter to enable hardware Rx vector. */
#define MLX5_RX_VEC_EN "rx_vec_en"
+/* Allow L3 VXLAN flow creation. */
+#define MLX5_L3_VXLAN_EN "l3_vxlan_en"
+
/* Activate Netlink support in VF mode. */
#define MLX5_VF_NL_EN "vf_nl_en"
priv->txqs_n = 0;
priv->txqs = NULL;
}
+ mlx5_flow_delete_drop_queue(dev);
if (priv->pd != NULL) {
assert(priv->ctx != NULL);
claim_zero(mlx5_glue->dealloc_pd(priv->pd));
.mac_addr_remove = mlx5_mac_addr_remove,
.mac_addr_add = mlx5_mac_addr_add,
.mac_addr_set = mlx5_mac_addr_set,
+ .set_mc_addr_list = mlx5_set_mc_addr_list,
.mtu_set = mlx5_dev_set_mtu,
.vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
.vlan_offload_set = mlx5_vlan_offload_set,
.mac_addr_remove = mlx5_mac_addr_remove,
.mac_addr_add = mlx5_mac_addr_add,
.mac_addr_set = mlx5_mac_addr_set,
+ .set_mc_addr_list = mlx5_set_mc_addr_list,
.mtu_set = mlx5_dev_set_mtu,
.vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
.vlan_offload_set = mlx5_vlan_offload_set,
config->tx_vec_en = !!tmp;
} else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
config->rx_vec_en = !!tmp;
+ } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
+ config->l3_vxlan_en = !!tmp;
} else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
config->vf_nl_en = !!tmp;
} else {
MLX5_TXQ_MAX_INLINE_LEN,
MLX5_TX_VEC_EN,
MLX5_RX_VEC_EN,
+ MLX5_L3_VXLAN_EN,
MLX5_VF_NL_EN,
NULL,
};
unsigned int mps;
unsigned int cqe_comp;
unsigned int tunnel_en = 0;
+ unsigned int swp = 0;
+ unsigned int verb_priorities = 0;
int idx;
int i;
struct mlx5dv_context attrs_out = {0};
break;
}
if (attr_ctx == NULL) {
- mlx5_glue->free_device_list(list);
switch (err) {
case 0:
DRV_LOG(ERR,
"cannot access device, is mlx5_ib loaded?");
err = ENODEV;
- goto error;
+ break;
case EINVAL:
DRV_LOG(ERR,
"cannot use device, are drivers up to date?");
- goto error;
+ break;
}
+ goto error;
}
ibv_dev = list[i];
DRV_LOG(DEBUG, "device opened");
+#ifdef HAVE_IBV_MLX5_MOD_SWP
+ attrs_out.comp_mask |= MLX5DV_CONTEXT_MASK_SWP;
+#endif
/*
* Multi-packet send is supported by ConnectX-4 Lx PF as well
* as all ConnectX-5 devices.
DRV_LOG(DEBUG, "MPW isn't supported");
mps = MLX5_MPW_DISABLED;
}
+#ifdef HAVE_IBV_MLX5_MOD_SWP
+ if (attrs_out.comp_mask & MLX5DV_CONTEXT_MASK_SWP)
+ swp = attrs_out.sw_parsing_caps.sw_parsing_offloads;
+ DRV_LOG(DEBUG, "SWP support: %u", swp);
+#endif
if (RTE_CACHE_LINE_SIZE == 128 &&
!(attrs_out.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
cqe_comp = 0;
DRV_LOG(WARNING,
"tunnel offloading disabled due to old OFED/rdma-core version");
#endif
- if (mlx5_glue->query_device_ex(attr_ctx, NULL, &device_attr)) {
- err = errno;
+ err = mlx5_glue->query_device_ex(attr_ctx, NULL, &device_attr);
+ if (err) {
+ DEBUG("ibv_query_device_ex() failed");
goto error;
}
DRV_LOG(INFO, "%u port(s) detected",
.txqs_inline = MLX5_ARG_UNSET,
.inline_max_packet_sz = MLX5_ARG_UNSET,
.vf_nl_en = 1,
+ .swp = !!swp,
};
len = snprintf(name, sizeof(name), PCI_PRI_FMT,
eth_dev->device = &pci_dev->device;
eth_dev->dev_ops = &mlx5_dev_sec_ops;
err = mlx5_uar_init_secondary(eth_dev);
- if (err)
+ if (err) {
+ err = rte_errno;
goto error;
+ }
/* Receive command fd from primary process */
err = mlx5_socket_connect(eth_dev);
- if (err)
+ if (err < 0) {
+ err = rte_errno;
goto error;
+ }
/* Remap UAR for Tx queues. */
err = mlx5_tx_uar_remap(eth_dev, err);
- if (err)
+ if (err) {
+ err = rte_errno;
goto error;
+ }
/*
* Ethdev pointer is still required as input since
* the primary device is not accessible from the
if (err) {
DRV_LOG(ERR, "failed to process device arguments: %s",
strerror(err));
+ err = rte_errno;
goto port_error;
}
- if (mlx5_glue->query_device_ex(ctx, NULL, &device_attr_ex)) {
+ err = mlx5_glue->query_device_ex(ctx, NULL, &device_attr_ex);
+ if (err) {
DRV_LOG(ERR, "ibv_query_device_ex() failed");
- err = errno;
goto port_error;
}
config.hw_csum = !!(device_attr_ex.device_cap_flags_ex &
rte_eth_copy_pci_info(eth_dev, pci_dev);
eth_dev->device->driver = &mlx5_driver.driver;
err = mlx5_uar_init_primary(eth_dev);
- if (err)
+ if (err) {
+ err = rte_errno;
goto port_error;
+ }
/* Configure the first MAC address by default. */
if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
DRV_LOG(ERR,
#endif
/* Get actual MTU if possible. */
err = mlx5_get_mtu(eth_dev, &priv->mtu);
- if (err)
+ if (err) {
+ err = rte_errno;
goto port_error;
+ }
DRV_LOG(DEBUG, "port %u MTU is %u", eth_dev->data->port_id,
priv->mtu);
/*
DRV_LOG(DEBUG, "port %u forcing Ethernet interface up",
eth_dev->data->port_id);
mlx5_set_link_up(eth_dev);
+ /*
+ * Even though the interrupt handler is not installed yet,
+ * interrupts will still trigger on the asyn_fd from
+ * Verbs context returned by ibv_open_device().
+ */
+ mlx5_link_update(eth_dev, 0);
/* Store device configuration on private structure. */
priv->config = config;
+ /* Create drop queue. */
+ err = mlx5_flow_create_drop_queue(eth_dev);
+ if (err) {
+ DRV_LOG(ERR, "port %u drop queue allocation failed: %s",
+ eth_dev->data->port_id, strerror(rte_errno));
+ err = rte_errno;
+ goto port_error;
+ }
+ /* Supported Verbs flow priority number detection. */
+ if (verb_priorities == 0)
+ verb_priorities = mlx5_get_max_verbs_prio(eth_dev);
+ if (verb_priorities < MLX5_VERBS_FLOW_PRIO_8) {
+ DRV_LOG(ERR, "port %u wrong Verbs flow priorities: %u",
+ eth_dev->data->port_id, verb_priorities);
+ goto port_error;
+ }
+ priv->config.max_verbs_prio = verb_priorities;
continue;
port_error:
if (priv)
static void
rte_mlx5_pmd_init(void)
{
- /* Build the static table for ptype conversion. */
+ /* Build the static tables for Verbs conversion. */
mlx5_set_ptype_table();
+ mlx5_set_cksum_table();
+ mlx5_set_swp_types_table();
/*
* RDMAV_HUGEPAGES_SAFE tells ibv_fork_init() we intend to use
* huge pages. Calling ibv_fork_init() during init allows
git.droids-corp.org / dpdk.git / blobdiff