-/*-
- * BSD LICENSE
- *
- * Copyright 2015 6WIND S.A.
- * Copyright 2015 Mellanox.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of 6WIND S.A. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2015 6WIND S.A.
+ * Copyright 2015 Mellanox.
*/
#include <stddef.h>
#include <unistd.h>
#include <string.h>
#include <assert.h>
+#include <dlfcn.h>
#include <stdint.h>
#include <stdlib.h>
#include <errno.h>
#include <net/if.h>
+#include <sys/mman.h>
/* Verbs header. */
/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
#endif
#include <rte_malloc.h>
-#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
#include <rte_ethdev_pci.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
#include <rte_common.h>
+#include <rte_config.h>
+#include <rte_eal_memconfig.h>
#include <rte_kvargs.h>
#include "mlx5.h"
#include "mlx5_rxtx.h"
#include "mlx5_autoconf.h"
#include "mlx5_defs.h"
+#include "mlx5_glue.h"
/* Device parameter to enable RX completion queue compression. */
#define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
struct priv *priv = data;
void *ret;
size_t alignment = sysconf(_SC_PAGESIZE);
+ unsigned int socket = SOCKET_ID_ANY;
+
+ if (priv->verbs_alloc_ctx.type == MLX5_VERBS_ALLOC_TYPE_TX_QUEUE) {
+ const struct mlx5_txq_ctrl *ctrl = priv->verbs_alloc_ctx.obj;
+ socket = ctrl->socket;
+ } else if (priv->verbs_alloc_ctx.type ==
+ MLX5_VERBS_ALLOC_TYPE_RX_QUEUE) {
+ const struct mlx5_rxq_ctrl *ctrl = priv->verbs_alloc_ctx.obj;
+
+ socket = ctrl->socket;
+ }
assert(data != NULL);
- ret = rte_malloc_socket(__func__, size, alignment,
- priv->dev->device->numa_node);
+ ret = rte_malloc_socket(__func__, size, alignment, socket);
DEBUG("Extern alloc size: %lu, align: %lu: %p", size, alignment, ret);
return ret;
}
unsigned int i;
int ret;
- priv_lock(priv);
DEBUG("%p: closing device \"%s\"",
(void *)dev,
((priv->ctx != NULL) ? priv->ctx->device->name : ""));
/* In case mlx5_dev_stop() has not been called. */
- priv_dev_interrupt_handler_uninstall(priv, dev);
- priv_dev_traffic_disable(priv, dev);
+ mlx5_dev_interrupt_handler_uninstall(dev);
+ mlx5_traffic_disable(dev);
/* Prevent crashes when queues are still in use. */
dev->rx_pkt_burst = removed_rx_burst;
dev->tx_pkt_burst = removed_tx_burst;
/* XXX race condition if mlx5_rx_burst() is still running. */
usleep(1000);
for (i = 0; (i != priv->rxqs_n); ++i)
- mlx5_priv_rxq_release(priv, i);
+ mlx5_rxq_release(dev, i);
priv->rxqs_n = 0;
priv->rxqs = NULL;
}
/* XXX race condition if mlx5_tx_burst() is still running. */
usleep(1000);
for (i = 0; (i != priv->txqs_n); ++i)
- mlx5_priv_txq_release(priv, i);
+ mlx5_txq_release(dev, i);
priv->txqs_n = 0;
priv->txqs = NULL;
}
if (priv->pd != NULL) {
assert(priv->ctx != NULL);
- claim_zero(ibv_dealloc_pd(priv->pd));
- claim_zero(ibv_close_device(priv->ctx));
+ claim_zero(mlx5_glue->dealloc_pd(priv->pd));
+ claim_zero(mlx5_glue->close_device(priv->ctx));
} else
assert(priv->ctx == NULL);
if (priv->rss_conf.rss_key != NULL)
rte_free(priv->rss_conf.rss_key);
if (priv->reta_idx != NULL)
rte_free(priv->reta_idx);
- priv_socket_uninit(priv);
- ret = mlx5_priv_hrxq_ibv_verify(priv);
+ if (priv->primary_socket)
+ mlx5_socket_uninit(dev);
+ ret = mlx5_hrxq_ibv_verify(dev);
if (ret)
- WARN("%p: some Hash Rx queue still remain", (void *)priv);
- ret = mlx5_priv_ind_table_ibv_verify(priv);
+ WARN("%p: some Hash Rx queue still remain", (void *)dev);
+ ret = mlx5_ind_table_ibv_verify(dev);
if (ret)
- WARN("%p: some Indirection table still remain", (void *)priv);
- ret = mlx5_priv_rxq_ibv_verify(priv);
+ WARN("%p: some Indirection table still remain", (void *)dev);
+ ret = mlx5_rxq_ibv_verify(dev);
if (ret)
- WARN("%p: some Verbs Rx queue still remain", (void *)priv);
- ret = mlx5_priv_rxq_verify(priv);
+ WARN("%p: some Verbs Rx queue still remain", (void *)dev);
+ ret = mlx5_rxq_verify(dev);
if (ret)
- WARN("%p: some Rx Queues still remain", (void *)priv);
- ret = mlx5_priv_txq_ibv_verify(priv);
+ WARN("%p: some Rx Queues still remain", (void *)dev);
+ ret = mlx5_txq_ibv_verify(dev);
if (ret)
- WARN("%p: some Verbs Tx queue still remain", (void *)priv);
- ret = mlx5_priv_txq_verify(priv);
+ WARN("%p: some Verbs Tx queue still remain", (void *)dev);
+ ret = mlx5_txq_verify(dev);
if (ret)
- WARN("%p: some Tx Queues still remain", (void *)priv);
- ret = priv_flow_verify(priv);
+ WARN("%p: some Tx Queues still remain", (void *)dev);
+ ret = mlx5_flow_verify(dev);
if (ret)
- WARN("%p: some flows still remain", (void *)priv);
- ret = priv_mr_verify(priv);
+ WARN("%p: some flows still remain", (void *)dev);
+ ret = mlx5_mr_verify(dev);
if (ret)
- WARN("%p: some Memory Region still remain", (void *)priv);
- priv_unlock(priv);
+ WARN("%p: some Memory Region still remain", (void *)dev);
memset(priv, 0, sizeof(*priv));
}
.tx_descriptor_status = mlx5_tx_descriptor_status,
.rx_queue_intr_enable = mlx5_rx_intr_enable,
.rx_queue_intr_disable = mlx5_rx_intr_disable,
+ .is_removed = mlx5_is_removed,
};
static const struct eth_dev_ops mlx5_dev_sec_ops = {
.tx_descriptor_status = mlx5_tx_descriptor_status,
.rx_queue_intr_enable = mlx5_rx_intr_enable,
.rx_queue_intr_disable = mlx5_rx_intr_disable,
+ .is_removed = mlx5_is_removed,
};
static struct {
static struct rte_pci_driver mlx5_driver;
+/*
+ * Reserved UAR address space for TXQ UAR(hw doorbell) mapping, process
+ * local resource used by both primary and secondary to avoid duplicate
+ * reservation.
+ * The space has to be available on both primary and secondary process,
+ * TXQ UAR maps to this area using fixed mmap w/o double check.
+ */
+static void *uar_base;
+
+/**
+ * Reserve UAR address space for primary process.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+mlx5_uar_init_primary(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ void *addr = (void *)0;
+ int i;
+ const struct rte_mem_config *mcfg;
+ int ret;
+
+ if (uar_base) { /* UAR address space mapped. */
+ priv->uar_base = uar_base;
+ return 0;
+ }
+ /* find out lower bound of hugepage segments */
+ mcfg = rte_eal_get_configuration()->mem_config;
+ for (i = 0; i < RTE_MAX_MEMSEG && mcfg->memseg[i].addr; i++) {
+ if (addr)
+ addr = RTE_MIN(addr, mcfg->memseg[i].addr);
+ else
+ addr = mcfg->memseg[i].addr;
+ }
+ /* keep distance to hugepages to minimize potential conflicts. */
+ addr = RTE_PTR_SUB(addr, MLX5_UAR_OFFSET + MLX5_UAR_SIZE);
+ /* anonymous mmap, no real memory consumption. */
+ addr = mmap(addr, MLX5_UAR_SIZE,
+ PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ if (addr == MAP_FAILED) {
+ ERROR("Failed to reserve UAR address space, please adjust "
+ "MLX5_UAR_SIZE or try --base-virtaddr");
+ ret = ENOMEM;
+ return ret;
+ }
+ /* Accept either same addr or a new addr returned from mmap if target
+ * range occupied.
+ */
+ INFO("Reserved UAR address space: %p", addr);
+ priv->uar_base = addr; /* for primary and secondary UAR re-mmap. */
+ uar_base = addr; /* process local, don't reserve again. */
+ return 0;
+}
+
+/**
+ * Reserve UAR address space for secondary process, align with
+ * primary process.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+mlx5_uar_init_secondary(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ void *addr;
+ int ret;
+
+ assert(priv->uar_base);
+ if (uar_base) { /* already reserved. */
+ assert(uar_base == priv->uar_base);
+ return 0;
+ }
+ /* anonymous mmap, no real memory consumption. */
+ addr = mmap(priv->uar_base, MLX5_UAR_SIZE,
+ PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ if (addr == MAP_FAILED) {
+ ERROR("UAR mmap failed: %p size: %llu",
+ priv->uar_base, MLX5_UAR_SIZE);
+ ret = ENXIO;
+ return ret;
+ }
+ if (priv->uar_base != addr) {
+ ERROR("UAR address %p size %llu occupied, please adjust "
+ "MLX5_UAR_OFFSET or try EAL parameter --base-virtaddr",
+ priv->uar_base, MLX5_UAR_SIZE);
+ ret = ENXIO;
+ return ret;
+ }
+ uar_base = addr; /* process local, don't reserve again */
+ INFO("Reserved UAR address space: %p", addr);
+ return 0;
+}
+
/**
* DPDK callback to register a PCI device.
*
* 0 on success, negative errno value on failure.
*/
static int
-mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
+ struct rte_pci_device *pci_dev)
{
struct ibv_device **list;
struct ibv_device *ibv_dev;
int err = 0;
struct ibv_context *attr_ctx = NULL;
struct ibv_device_attr_ex device_attr;
- unsigned int sriov;
unsigned int mps;
unsigned int cqe_comp;
unsigned int tunnel_en = 0;
int idx;
int i;
- struct mlx5dv_context attrs_out;
+ struct mlx5dv_context attrs_out = {0};
#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
struct ibv_counter_set_description cs_desc;
#endif
- (void)pci_drv;
assert(pci_drv == &mlx5_driver);
/* Get mlx5_dev[] index. */
idx = mlx5_dev_idx(&pci_dev->addr);
return -ENOMEM;
}
DEBUG("using driver device index %d", idx);
-
/* Save PCI address. */
mlx5_dev[idx].pci_addr = pci_dev->addr;
- list = ibv_get_device_list(&i);
+ list = mlx5_glue->get_device_list(&i);
if (list == NULL) {
assert(errno);
if (errno == ENOSYS)
(pci_dev->addr.devid != pci_addr.devid) ||
(pci_dev->addr.function != pci_addr.function))
continue;
- sriov = ((pci_dev->id.device_id ==
- PCI_DEVICE_ID_MELLANOX_CONNECTX4VF) ||
- (pci_dev->id.device_id ==
- PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF) ||
- (pci_dev->id.device_id ==
- PCI_DEVICE_ID_MELLANOX_CONNECTX5VF) ||
- (pci_dev->id.device_id ==
- PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF));
- switch (pci_dev->id.device_id) {
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
- tunnel_en = 1;
- break;
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
- tunnel_en = 1;
- break;
- default:
- break;
- }
- INFO("PCI information matches, using device \"%s\""
- " (SR-IOV: %s)",
- list[i]->name,
- sriov ? "true" : "false");
- attr_ctx = ibv_open_device(list[i]);
+ INFO("PCI information matches, using device \"%s\"",
+ list[i]->name);
+ attr_ctx = mlx5_glue->open_device(list[i]);
err = errno;
break;
}
if (attr_ctx == NULL) {
- ibv_free_device_list(list);
+ mlx5_glue->free_device_list(list);
switch (err) {
case 0:
ERROR("cannot access device, is mlx5_ib loaded?");
return -err;
}
ibv_dev = list[i];
-
DEBUG("device opened");
/*
* Multi-packet send is supported by ConnectX-4 Lx PF as well
* as all ConnectX-5 devices.
*/
- mlx5dv_query_device(attr_ctx, &attrs_out);
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ attrs_out.comp_mask |= MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS;
+#endif
+ mlx5_glue->dv_query_device(attr_ctx, &attrs_out);
if (attrs_out.flags & MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED) {
if (attrs_out.flags & MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW) {
DEBUG("Enhanced MPW is supported");
cqe_comp = 0;
else
cqe_comp = 1;
- if (ibv_query_device_ex(attr_ctx, NULL, &device_attr))
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ if (attrs_out.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) {
+ tunnel_en = ((attrs_out.tunnel_offloads_caps &
+ MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN) &&
+ (attrs_out.tunnel_offloads_caps &
+ MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE));
+ }
+ DEBUG("Tunnel offloading is %ssupported", tunnel_en ? "" : "not ");
+#else
+ WARN("Tunnel offloading disabled due to old OFED/rdma-core version");
+#endif
+ if (mlx5_glue->query_device_ex(attr_ctx, NULL, &device_attr))
goto error;
INFO("%u port(s) detected", device_attr.orig_attr.phys_port_cnt);
-
for (i = 0; i < device_attr.orig_attr.phys_port_cnt; i++) {
+ char name[RTE_ETH_NAME_MAX_LEN];
+ int len;
uint32_t port = i + 1; /* ports are indexed from one */
uint32_t test = (1 << i);
struct ibv_context *ctx = NULL;
struct ibv_port_attr port_attr;
struct ibv_pd *pd = NULL;
struct priv *priv = NULL;
- struct rte_eth_dev *eth_dev;
+ struct rte_eth_dev *eth_dev = NULL;
struct ibv_device_attr_ex device_attr_ex;
struct ether_addr mac;
- uint16_t num_vfs = 0;
struct ibv_device_attr_ex device_attr;
struct mlx5_dev_config config = {
.cqe_comp = cqe_comp,
.inline_max_packet_sz = MLX5_ARG_UNSET,
};
+ len = snprintf(name, sizeof(name), PCI_PRI_FMT,
+ pci_dev->addr.domain, pci_dev->addr.bus,
+ pci_dev->addr.devid, pci_dev->addr.function);
+ if (device_attr.orig_attr.phys_port_cnt > 1)
+ snprintf(name + len, sizeof(name), " port %u", i);
mlx5_dev[idx].ports |= test;
-
if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
- /* from rte_ethdev.c */
- char name[RTE_ETH_NAME_MAX_LEN];
-
- snprintf(name, sizeof(name), "%s port %u",
- ibv_get_device_name(ibv_dev), port);
eth_dev = rte_eth_dev_attach_secondary(name);
if (eth_dev == NULL) {
ERROR("can not attach rte ethdev");
}
eth_dev->device = &pci_dev->device;
eth_dev->dev_ops = &mlx5_dev_sec_ops;
- priv = eth_dev->data->dev_private;
- /* Receive command fd from primary process */
- err = priv_socket_connect(priv);
+ err = mlx5_uar_init_secondary(eth_dev);
if (err < 0) {
err = -err;
goto error;
}
- /* Remap UAR for Tx queues. */
- err = priv_tx_uar_remap(priv, err);
+ /* Receive command fd from primary process */
+ err = mlx5_socket_connect(eth_dev);
if (err < 0) {
err = -err;
goto error;
}
+ /* Remap UAR for Tx queues. */
+ err = mlx5_tx_uar_remap(eth_dev, err);
+ if (err)
+ goto error;
/*
* Ethdev pointer is still required as input since
* the primary device is not accessible from the
* secondary process.
*/
eth_dev->rx_pkt_burst =
- priv_select_rx_function(priv, eth_dev);
+ mlx5_select_rx_function(eth_dev);
eth_dev->tx_pkt_burst =
- priv_select_tx_function(priv, eth_dev);
+ mlx5_select_tx_function(eth_dev);
continue;
}
-
DEBUG("using port %u (%08" PRIx32 ")", port, test);
-
- ctx = ibv_open_device(ibv_dev);
+ ctx = mlx5_glue->open_device(ibv_dev);
if (ctx == NULL) {
err = ENODEV;
goto port_error;
}
-
- ibv_query_device_ex(ctx, NULL, &device_attr);
+ mlx5_glue->query_device_ex(ctx, NULL, &device_attr);
/* Check port status. */
- err = ibv_query_port(ctx, port, &port_attr);
+ err = mlx5_glue->query_port(ctx, port, &port_attr);
if (err) {
ERROR("port query failed: %s", strerror(err));
goto port_error;
}
-
if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
ERROR("port %d is not configured in Ethernet mode",
port);
err = EINVAL;
goto port_error;
}
-
if (port_attr.state != IBV_PORT_ACTIVE)
DEBUG("port %d is not active: \"%s\" (%d)",
- port, ibv_port_state_str(port_attr.state),
+ port, mlx5_glue->port_state_str(port_attr.state),
port_attr.state);
-
/* Allocate protection domain. */
- pd = ibv_alloc_pd(ctx);
+ pd = mlx5_glue->alloc_pd(ctx);
if (pd == NULL) {
ERROR("PD allocation failure");
err = ENOMEM;
goto port_error;
}
-
mlx5_dev[idx].ports |= test;
-
/* from rte_ethdev.c */
priv = rte_zmalloc("ethdev private structure",
sizeof(*priv),
err = ENOMEM;
goto port_error;
}
-
priv->ctx = ctx;
strncpy(priv->ibdev_path, priv->ctx->device->ibdev_path,
sizeof(priv->ibdev_path));
strerror(err));
goto port_error;
}
- if (ibv_query_device_ex(ctx, NULL, &device_attr_ex)) {
+ if (mlx5_glue->query_device_ex(ctx, NULL, &device_attr_ex)) {
ERROR("ibv_query_device_ex() failed");
goto port_error;
}
-
config.hw_csum = !!(device_attr_ex.device_cap_flags_ex &
IBV_DEVICE_RAW_IP_CSUM);
DEBUG("checksum offloading is %ssupported",
(config.hw_csum ? "" : "not "));
-
-#ifdef HAVE_IBV_DEVICE_VXLAN_SUPPORT
- config.hw_csum_l2tun =
- !!(exp_device_attr.exp_device_cap_flags &
- IBV_DEVICE_VXLAN_SUPPORT);
-#endif
- DEBUG("Rx L2 tunnel checksum offloads are %ssupported",
- (config.hw_csum_l2tun ? "" : "not "));
-
#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
config.flow_counter_en = !!(device_attr.max_counter_sets);
- ibv_describe_counter_set(ctx, 0, &cs_desc);
+ mlx5_glue->describe_counter_set(ctx, 0, &cs_desc);
DEBUG("counter type = %d, num of cs = %ld, attributes = %d",
cs_desc.counter_type, cs_desc.num_of_cs,
cs_desc.attributes);
DEBUG("VLAN stripping is %ssupported",
(config.hw_vlan_strip ? "" : "not "));
- config.hw_fcs_strip =
- !!(device_attr_ex.orig_attr.device_cap_flags &
- IBV_WQ_FLAGS_SCATTER_FCS);
+ config.hw_fcs_strip = !!(device_attr_ex.raw_packet_caps &
+ IBV_RAW_PACKET_CAP_SCATTER_FCS);
DEBUG("FCS stripping configuration is %ssupported",
(config.hw_fcs_strip ? "" : "not "));
#endif
DEBUG("hardware RX end alignment padding is %ssupported",
(config.hw_padding ? "" : "not "));
-
- priv_get_num_vfs(priv, &num_vfs);
- config.sriov = (num_vfs || sriov);
config.tso = ((device_attr_ex.tso_caps.max_tso > 0) &&
(device_attr_ex.tso_caps.supported_qpts &
(1 << IBV_QPT_RAW_PACKET)));
WARN("Rx CQE compression isn't supported");
config.cqe_comp = 0;
}
+ eth_dev = rte_eth_dev_allocate(name);
+ if (eth_dev == NULL) {
+ ERROR("can not allocate rte ethdev");
+ err = ENOMEM;
+ goto port_error;
+ }
+ eth_dev->data->dev_private = priv;
+ priv->dev = eth_dev;
+ eth_dev->data->mac_addrs = priv->mac;
+ eth_dev->device = &pci_dev->device;
+ rte_eth_copy_pci_info(eth_dev, pci_dev);
+ eth_dev->device->driver = &mlx5_driver.driver;
+ err = mlx5_uar_init_primary(eth_dev);
+ if (err)
+ goto port_error;
/* Configure the first MAC address by default. */
- if (priv_get_mac(priv, &mac.addr_bytes)) {
+ if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
ERROR("cannot get MAC address, is mlx5_en loaded?"
" (errno: %s)", strerror(errno));
err = ENODEV;
{
char ifname[IF_NAMESIZE];
- if (priv_get_ifname(priv, &ifname) == 0)
+ if (mlx5_get_ifname(eth_dev, &ifname) == 0)
DEBUG("port %u ifname is \"%s\"",
priv->port, ifname);
else
}
#endif
/* Get actual MTU if possible. */
- priv_get_mtu(priv, &priv->mtu);
+ mlx5_get_mtu(eth_dev, &priv->mtu);
DEBUG("port %u MTU is %u", priv->port, priv->mtu);
-
- /* from rte_ethdev.c */
- {
- char name[RTE_ETH_NAME_MAX_LEN];
-
- snprintf(name, sizeof(name), "%s port %u",
- ibv_get_device_name(ibv_dev), port);
- eth_dev = rte_eth_dev_allocate(name);
- }
- if (eth_dev == NULL) {
- ERROR("can not allocate rte ethdev");
- err = ENOMEM;
- goto port_error;
- }
- eth_dev->data->dev_private = priv;
- eth_dev->data->mac_addrs = priv->mac;
- eth_dev->device = &pci_dev->device;
- rte_eth_copy_pci_info(eth_dev, pci_dev);
- eth_dev->device->driver = &mlx5_driver.driver;
- priv->dev = eth_dev;
+ /*
+ * Initialize burst functions to prevent crashes before link-up.
+ */
+ eth_dev->rx_pkt_burst = removed_rx_burst;
+ eth_dev->tx_pkt_burst = removed_tx_burst;
eth_dev->dev_ops = &mlx5_dev_ops;
/* Register MAC address. */
claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
TAILQ_INIT(&priv->flows);
TAILQ_INIT(&priv->ctrl_flows);
-
/* Hint libmlx5 to use PMD allocator for data plane resources */
struct mlx5dv_ctx_allocators alctr = {
.alloc = &mlx5_alloc_verbs_buf,
.free = &mlx5_free_verbs_buf,
.data = priv,
};
- mlx5dv_set_context_attr(ctx, MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
- (void *)((uintptr_t)&alctr));
-
+ mlx5_glue->dv_set_context_attr(ctx,
+ MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
+ (void *)((uintptr_t)&alctr));
/* Bring Ethernet device up. */
DEBUG("forcing Ethernet interface up");
- priv_set_flags(priv, ~IFF_UP, IFF_UP);
- mlx5_link_update(priv->dev, 1);
+ mlx5_set_flags(eth_dev, ~IFF_UP, IFF_UP);
/* Store device configuration on private structure. */
priv->config = config;
continue;
-
port_error:
if (priv)
rte_free(priv);
if (pd)
- claim_zero(ibv_dealloc_pd(pd));
+ claim_zero(mlx5_glue->dealloc_pd(pd));
if (ctx)
- claim_zero(ibv_close_device(ctx));
+ claim_zero(mlx5_glue->close_device(ctx));
break;
}
-
/*
* XXX if something went wrong in the loop above, there is a resource
* leak (ctx, pd, priv, dpdk ethdev) but we can do nothing about it as
* long as the dpdk does not provide a way to deallocate a ethdev and a
* way to enumerate the registered ethdevs to free the previous ones.
*/
-
/* no port found, complain */
if (!mlx5_dev[idx].ports) {
err = ENODEV;
goto error;
}
-
error:
if (attr_ctx)
- claim_zero(ibv_close_device(attr_ctx));
+ claim_zero(mlx5_glue->close_device(attr_ctx));
if (list)
- ibv_free_device_list(list);
+ mlx5_glue->free_device_list(list);
assert(err >= 0);
return -err;
}
.drv_flags = RTE_PCI_DRV_INTR_LSC | RTE_PCI_DRV_INTR_RMV,
};
+#ifdef RTE_LIBRTE_MLX5_DLOPEN_DEPS
+
+/**
+ * Suffix RTE_EAL_PMD_PATH with "-glue".
+ *
+ * This function performs a sanity check on RTE_EAL_PMD_PATH before
+ * suffixing its last component.
+ *
+ * @param buf[out]
+ * Output buffer, should be large enough otherwise NULL is returned.
+ * @param size
+ * Size of @p out.
+ *
+ * @return
+ * Pointer to @p buf or @p NULL in case suffix cannot be appended.
+ */
+static char *
+mlx5_glue_path(char *buf, size_t size)
+{
+ static const char *const bad[] = { "/", ".", "..", NULL };
+ const char *path = RTE_EAL_PMD_PATH;
+ size_t len = strlen(path);
+ size_t off;
+ int i;
+
+ while (len && path[len - 1] == '/')
+ --len;
+ for (off = len; off && path[off - 1] != '/'; --off)
+ ;
+ for (i = 0; bad[i]; ++i)
+ if (!strncmp(path + off, bad[i], (int)(len - off)))
+ goto error;
+ i = snprintf(buf, size, "%.*s-glue", (int)len, path);
+ if (i == -1 || (size_t)i >= size)
+ goto error;
+ return buf;
+error:
+ ERROR("unable to append \"-glue\" to last component of"
+ " RTE_EAL_PMD_PATH (\"" RTE_EAL_PMD_PATH "\"),"
+ " please re-configure DPDK");
+ return NULL;
+}
+
+/**
+ * Initialization routine for run-time dependency on rdma-core.
+ */
+static int
+mlx5_glue_init(void)
+{
+ char glue_path[sizeof(RTE_EAL_PMD_PATH) - 1 + sizeof("-glue")];
+ const char *path[] = {
+ /*
+ * A basic security check is necessary before trusting
+ * MLX5_GLUE_PATH, which may override RTE_EAL_PMD_PATH.
+ */
+ (geteuid() == getuid() && getegid() == getgid() ?
+ getenv("MLX5_GLUE_PATH") : NULL),
+ /*
+ * When RTE_EAL_PMD_PATH is set, use its glue-suffixed
+ * variant, otherwise let dlopen() look up libraries on its
+ * own.
+ */
+ (*RTE_EAL_PMD_PATH ?
+ mlx5_glue_path(glue_path, sizeof(glue_path)) : ""),
+ };
+ unsigned int i = 0;
+ void *handle = NULL;
+ void **sym;
+ const char *dlmsg;
+
+ while (!handle && i != RTE_DIM(path)) {
+ const char *end;
+ size_t len;
+ int ret;
+
+ if (!path[i]) {
+ ++i;
+ continue;
+ }
+ end = strpbrk(path[i], ":;");
+ if (!end)
+ end = path[i] + strlen(path[i]);
+ len = end - path[i];
+ ret = 0;
+ do {
+ char name[ret + 1];
+
+ ret = snprintf(name, sizeof(name), "%.*s%s" MLX5_GLUE,
+ (int)len, path[i],
+ (!len || *(end - 1) == '/') ? "" : "/");
+ if (ret == -1)
+ break;
+ if (sizeof(name) != (size_t)ret + 1)
+ continue;
+ DEBUG("looking for rdma-core glue as \"%s\"", name);
+ handle = dlopen(name, RTLD_LAZY);
+ break;
+ } while (1);
+ path[i] = end + 1;
+ if (!*end)
+ ++i;
+ }
+ if (!handle) {
+ rte_errno = EINVAL;
+ dlmsg = dlerror();
+ if (dlmsg)
+ WARN("cannot load glue library: %s", dlmsg);
+ goto glue_error;
+ }
+ sym = dlsym(handle, "mlx5_glue");
+ if (!sym || !*sym) {
+ rte_errno = EINVAL;
+ dlmsg = dlerror();
+ if (dlmsg)
+ ERROR("cannot resolve glue symbol: %s", dlmsg);
+ goto glue_error;
+ }
+ mlx5_glue = *sym;
+ return 0;
+glue_error:
+ if (handle)
+ dlclose(handle);
+ WARN("cannot initialize PMD due to missing run-time"
+ " dependency on rdma-core libraries (libibverbs,"
+ " libmlx5)");
+ return -rte_errno;
+}
+
+#endif
+
/**
* Driver initialization routine.
*/
/* Match the size of Rx completion entry to the size of a cacheline. */
if (RTE_CACHE_LINE_SIZE == 128)
setenv("MLX5_CQE_SIZE", "128", 0);
- ibv_fork_init();
+#ifdef RTE_LIBRTE_MLX5_DLOPEN_DEPS
+ if (mlx5_glue_init())
+ return;
+ assert(mlx5_glue);
+#endif
+#ifndef NDEBUG
+ /* Glue structure must not contain any NULL pointers. */
+ {
+ unsigned int i;
+
+ for (i = 0; i != sizeof(*mlx5_glue) / sizeof(void *); ++i)
+ assert(((const void *const *)mlx5_glue)[i]);
+ }
+#endif
+ if (strcmp(mlx5_glue->version, MLX5_GLUE_VERSION)) {
+ ERROR("rdma-core glue \"%s\" mismatch: \"%s\" is required",
+ mlx5_glue->version, MLX5_GLUE_VERSION);
+ return;
+ }
+ mlx5_glue->fork_init();
rte_pci_register(&mlx5_driver);
}
git.droids-corp.org / dpdk.git / blobdiff