#include <rte_rwlock.h>
#include <rte_spinlock.h>
#include <rte_string_fns.h>
+#include <rte_alarm.h>
#include "mlx5.h"
#include "mlx5_utils.h"
/* Device parameter to set the minimum number of Rx queues to enable MPRQ. */
#define MLX5_RXQS_MIN_MPRQ "rxqs_min_mprq"
-/* Device parameter to configure inline send. */
+/* Device parameter to configure inline send. Deprecated, ignored.*/
#define MLX5_TXQ_INLINE "txq_inline"
+/* Device parameter to limit packet size to inline with ordinary SEND. */
+#define MLX5_TXQ_INLINE_MAX "txq_inline_max"
+
+/* Device parameter to configure minimal data size to inline. */
+#define MLX5_TXQ_INLINE_MIN "txq_inline_min"
+
+/* Device parameter to limit packet size to inline with Enhanced MPW. */
+#define MLX5_TXQ_INLINE_MPW "txq_inline_mpw"
+
/*
* Device parameter to configure the number of TX queues threshold for
* enabling inline send.
/*
* Device parameter to configure the number of TX queues threshold for
- * enabling vectorized Tx.
+ * enabling vectorized Tx, deprecated, ignored (no vectorized Tx routines).
*/
#define MLX5_TXQS_MAX_VEC "txqs_max_vec"
/* Device parameter to enable multi-packet send WQEs. */
#define MLX5_TXQ_MPW_EN "txq_mpw_en"
-/* Device parameter to include 2 dsegs in the title WQEBB. */
+/*
+ * Device parameter to include 2 dsegs in the title WQEBB.
+ * Deprecated, ignored.
+ */
#define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en"
-/* Device parameter to limit the size of inlining packet. */
+/*
+ * Device parameter to limit the size of inlining packet.
+ * Deprecated, ignored.
+ */
#define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len"
-/* Device parameter to enable hardware Tx vector. */
+/*
+ * Device parameter to enable hardware Tx vector.
+ * Deprecated, ignored (no vectorized Tx routines anymore).
+ */
#define MLX5_TX_VEC_EN "tx_vec_en"
/* Device parameter to enable hardware Rx vector. */
/* Device parameter to configure the maximum number of dump files per queue. */
#define MLX5_MAX_DUMP_FILES_NUM "max_dump_files_num"
+/* Configure timeout of LRO session (in microseconds). */
+#define MLX5_LRO_TIMEOUT_USEC "lro_timeout_usec"
+
#ifndef HAVE_IBV_MLX5_MOD_MPW
#define MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED (1 << 2)
#define MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW (1 << 3)
static LIST_HEAD(, mlx5_ibv_shared) mlx5_ibv_list = LIST_HEAD_INITIALIZER();
static pthread_mutex_t mlx5_ibv_list_mutex = PTHREAD_MUTEX_INITIALIZER;
+/**
+ * Initialize the counters management structure.
+ *
+ * @param[in] sh
+ * Pointer to mlx5_ibv_shared object to free
+ */
+static void
+mlx5_flow_counters_mng_init(struct mlx5_ibv_shared *sh)
+{
+ uint8_t i;
+
+ TAILQ_INIT(&sh->cmng.flow_counters);
+ for (i = 0; i < RTE_DIM(sh->cmng.ccont); ++i)
+ TAILQ_INIT(&sh->cmng.ccont[i].pool_list);
+}
+
+/**
+ * Destroy all the resources allocated for a counter memory management.
+ *
+ * @param[in] mng
+ * Pointer to the memory management structure.
+ */
+static void
+mlx5_flow_destroy_counter_stat_mem_mng(struct mlx5_counter_stats_mem_mng *mng)
+{
+ uint8_t *mem = (uint8_t *)(uintptr_t)mng->raws[0].data;
+
+ LIST_REMOVE(mng, next);
+ claim_zero(mlx5_devx_cmd_destroy(mng->dm));
+ claim_zero(mlx5_glue->devx_umem_dereg(mng->umem));
+ rte_free(mem);
+}
+
+/**
+ * Close and release all the resources of the counters management.
+ *
+ * @param[in] sh
+ * Pointer to mlx5_ibv_shared object to free.
+ */
+static void
+mlx5_flow_counters_mng_close(struct mlx5_ibv_shared *sh)
+{
+ struct mlx5_counter_stats_mem_mng *mng;
+ uint8_t i;
+ int j;
+ int retries = 1024;
+
+ rte_errno = 0;
+ while (--retries) {
+ rte_eal_alarm_cancel(mlx5_flow_query_alarm, sh);
+ if (rte_errno != EINPROGRESS)
+ break;
+ rte_pause();
+ }
+ for (i = 0; i < RTE_DIM(sh->cmng.ccont); ++i) {
+ struct mlx5_flow_counter_pool *pool;
+ uint32_t batch = !!(i % 2);
+
+ if (!sh->cmng.ccont[i].pools)
+ continue;
+ pool = TAILQ_FIRST(&sh->cmng.ccont[i].pool_list);
+ while (pool) {
+ if (batch) {
+ if (pool->min_dcs)
+ claim_zero
+ (mlx5_devx_cmd_destroy(pool->min_dcs));
+ }
+ for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j) {
+ if (pool->counters_raw[j].action)
+ claim_zero
+ (mlx5_glue->destroy_flow_action
+ (pool->counters_raw[j].action));
+ if (!batch && pool->counters_raw[j].dcs)
+ claim_zero(mlx5_devx_cmd_destroy
+ (pool->counters_raw[j].dcs));
+ }
+ TAILQ_REMOVE(&sh->cmng.ccont[i].pool_list, pool,
+ next);
+ rte_free(pool);
+ pool = TAILQ_FIRST(&sh->cmng.ccont[i].pool_list);
+ }
+ rte_free(sh->cmng.ccont[i].pools);
+ }
+ mng = LIST_FIRST(&sh->cmng.mem_mngs);
+ while (mng) {
+ mlx5_flow_destroy_counter_stat_mem_mng(mng);
+ mng = LIST_FIRST(&sh->cmng.mem_mngs);
+ }
+ memset(&sh->cmng, 0, sizeof(sh->cmng));
+}
+
+/**
+ * Extract pdn of PD object using DV API.
+ *
+ * @param[in] pd
+ * Pointer to the verbs PD object.
+ * @param[out] pdn
+ * Pointer to the PD object number variable.
+ *
+ * @return
+ * 0 on success, error value otherwise.
+ */
+#ifdef HAVE_IBV_FLOW_DV_SUPPORT
+static int
+mlx5_get_pdn(struct ibv_pd *pd __rte_unused, uint32_t *pdn __rte_unused)
+{
+ struct mlx5dv_obj obj;
+ struct mlx5dv_pd pd_info;
+ int ret = 0;
+
+ obj.pd.in = pd;
+ obj.pd.out = &pd_info;
+ ret = mlx5_glue->dv_init_obj(&obj, MLX5DV_OBJ_PD);
+ if (ret) {
+ DRV_LOG(DEBUG, "Fail to get PD object info");
+ return ret;
+ }
+ *pdn = pd_info.pdn;
+ return 0;
+}
+#endif /* HAVE_IBV_FLOW_DV_SUPPORT */
+
/**
* Allocate shared IB device context. If there is multiport device the
* master and representors will share this context, if there is single
err = ENOMEM;
goto error;
}
+#ifdef HAVE_IBV_FLOW_DV_SUPPORT
+ err = mlx5_get_pdn(sh->pd, &sh->pdn);
+ if (err) {
+ DRV_LOG(ERR, "Fail to extract pdn from PD");
+ goto error;
+ }
+#endif /* HAVE_IBV_FLOW_DV_SUPPORT */
/*
* Once the device is added to the list of memory event
* callback, its global MR cache table cannot be expanded
err = rte_errno;
goto error;
}
+ mlx5_flow_counters_mng_init(sh);
+ /* Add device to memory callback list. */
+ rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
+ LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
+ sh, mem_event_cb);
+ rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
+ /* Add context to the global device list. */
LIST_INSERT_HEAD(&mlx5_ibv_list, sh, next);
exit:
pthread_mutex_unlock(&mlx5_ibv_list_mutex);
goto exit;
/* Release created Memory Regions. */
mlx5_mr_release(sh);
+ /* Remove from memory callback device list. */
+ rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
+ LIST_REMOVE(sh, mem_event_cb);
+ rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
+ /* Remove context from the global device list. */
LIST_REMOVE(sh, next);
/*
* Ensure there is no async event handler installed.
* Only primary process handles async device events.
**/
+ mlx5_flow_counters_mng_close(sh);
assert(!sh->intr_cnt);
if (sh->intr_cnt)
mlx5_intr_callback_unregister
rte_free(ptr);
}
+/**
+ * DPDK callback to add udp tunnel port
+ *
+ * @param[in] dev
+ * A pointer to eth_dev
+ * @param[in] udp_tunnel
+ * A pointer to udp tunnel
+ *
+ * @return
+ * 0 on valid udp ports and tunnels, -ENOTSUP otherwise.
+ */
+int
+mlx5_udp_tunnel_port_add(struct rte_eth_dev *dev __rte_unused,
+ struct rte_eth_udp_tunnel *udp_tunnel)
+{
+ assert(udp_tunnel != NULL);
+ if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN &&
+ udp_tunnel->udp_port == 4789)
+ return 0;
+ if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN_GPE &&
+ udp_tunnel->udp_port == 4790)
+ return 0;
+ return -ENOTSUP;
+}
+
/**
* Initialize process private data structure.
*
}
mlx5_proc_priv_uninit(dev);
mlx5_mprq_free_mp(dev);
- /* Remove from memory callback device list. */
- rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
- assert(priv->sh);
- LIST_REMOVE(priv->sh, mem_event_cb);
- rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
mlx5_free_shared_dr(priv);
if (priv->rss_conf.rss_key != NULL)
rte_free(priv->rss_conf.rss_key);
close(priv->nl_socket_route);
if (priv->nl_socket_rdma >= 0)
close(priv->nl_socket_rdma);
- if (priv->tcf_context)
- mlx5_flow_tcf_context_destroy(priv->tcf_context);
+ if (priv->vmwa_context)
+ mlx5_vlan_vmwa_exit(priv->vmwa_context);
if (priv->sh) {
/*
* Free the shared context in last turn, because the cleanup
mlx5_free_shared_ibctx(priv->sh);
priv->sh = NULL;
}
- ret = mlx5_hrxq_ibv_verify(dev);
+ ret = mlx5_hrxq_verify(dev);
if (ret)
DRV_LOG(WARNING, "port %u some hash Rx queue still remain",
dev->data->port_id);
- ret = mlx5_ind_table_ibv_verify(dev);
+ ret = mlx5_ind_table_obj_verify(dev);
if (ret)
DRV_LOG(WARNING, "port %u some indirection table still remain",
dev->data->port_id);
- ret = mlx5_rxq_ibv_verify(dev);
+ ret = mlx5_rxq_obj_verify(dev);
if (ret)
- DRV_LOG(WARNING, "port %u some Verbs Rx queue still remain",
+ DRV_LOG(WARNING, "port %u some Rx queue objects still remain",
dev->data->port_id);
ret = mlx5_rxq_verify(dev);
if (ret)
.rx_queue_intr_enable = mlx5_rx_intr_enable,
.rx_queue_intr_disable = mlx5_rx_intr_disable,
.is_removed = mlx5_is_removed,
+ .udp_tunnel_port_add = mlx5_udp_tunnel_port_add,
};
/* Available operations from secondary process. */
} else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
config->mprq.min_rxqs_num = tmp;
} else if (strcmp(MLX5_TXQ_INLINE, key) == 0) {
- config->txq_inline = tmp;
+ DRV_LOG(WARNING, "%s: deprecated parameter,"
+ " converted to txq_inline_max", key);
+ config->txq_inline_max = tmp;
+ } else if (strcmp(MLX5_TXQ_INLINE_MAX, key) == 0) {
+ config->txq_inline_max = tmp;
+ } else if (strcmp(MLX5_TXQ_INLINE_MIN, key) == 0) {
+ config->txq_inline_min = tmp;
+ } else if (strcmp(MLX5_TXQ_INLINE_MPW, key) == 0) {
+ config->txq_inline_mpw = tmp;
} else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
config->txqs_inline = tmp;
} else if (strcmp(MLX5_TXQS_MAX_VEC, key) == 0) {
- config->txqs_vec = tmp;
+ DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
config->mps = !!tmp;
} else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
- config->mpw_hdr_dseg = !!tmp;
+ DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
- config->inline_max_packet_sz = tmp;
+ DRV_LOG(WARNING, "%s: deprecated parameter,"
+ " converted to txq_inline_mpw", key);
+ config->txq_inline_mpw = tmp;
} else if (strcmp(MLX5_TX_VEC_EN, key) == 0) {
- config->tx_vec_en = !!tmp;
+ DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
config->rx_vec_en = !!tmp;
} else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
config->mr_ext_memseg_en = !!tmp;
} else if (strcmp(MLX5_MAX_DUMP_FILES_NUM, key) == 0) {
config->max_dump_files_num = tmp;
+ } else if (strcmp(MLX5_LRO_TIMEOUT_USEC, key) == 0) {
+ config->lro.timeout = tmp;
} else {
DRV_LOG(WARNING, "%s: unknown parameter", key);
rte_errno = EINVAL;
MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
MLX5_RXQS_MIN_MPRQ,
MLX5_TXQ_INLINE,
+ MLX5_TXQ_INLINE_MIN,
+ MLX5_TXQ_INLINE_MAX,
+ MLX5_TXQ_INLINE_MPW,
MLX5_TXQS_MIN_INLINE,
MLX5_TXQS_MAX_VEC,
MLX5_TXQ_MPW_EN,
MLX5_MR_EXT_MEMSEG_EN,
MLX5_REPRESENTOR,
MLX5_MAX_DUMP_FILES_NUM,
+ MLX5_LRO_TIMEOUT_USEC,
NULL,
};
struct rte_kvargs *kvlist;
return 0;
/* Following UGLY cast is done to pass checkpatch. */
kvlist = rte_kvargs_parse(devargs->args, params);
- if (kvlist == NULL)
- return 0;
+ if (kvlist == NULL) {
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
/* Process parameters. */
for (i = 0; (params[i] != NULL); ++i) {
if (rte_kvargs_count(kvlist, params[i])) {
return ret;
}
+/**
+ * Configures the minimal amount of data to inline into WQE
+ * while sending packets.
+ *
+ * - the txq_inline_min has the maximal priority, if this
+ * key is specified in devargs
+ * - if DevX is enabled the inline mode is queried from the
+ * device (HCA attributes and NIC vport context if needed).
+ * - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4LX
+ * and none (0 bytes) for other NICs
+ *
+ * @param spawn
+ * Verbs device parameters (name, port, switch_info) to spawn.
+ * @param config
+ * Device configuration parameters.
+ */
+static void
+mlx5_set_min_inline(struct mlx5_dev_spawn_data *spawn,
+ struct mlx5_dev_config *config)
+{
+ if (config->txq_inline_min != MLX5_ARG_UNSET) {
+ /* Application defines size of inlined data explicitly. */
+ switch (spawn->pci_dev->id.device_id) {
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
+ if (config->txq_inline_min <
+ (int)MLX5_INLINE_HSIZE_L2) {
+ DRV_LOG(DEBUG,
+ "txq_inline_mix aligned to minimal"
+ " ConnectX-4 required value %d",
+ (int)MLX5_INLINE_HSIZE_L2);
+ config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
+ }
+ break;
+ }
+ goto exit;
+ }
+ if (config->hca_attr.eth_net_offloads) {
+ /* We have DevX enabled, inline mode queried successfully. */
+ switch (config->hca_attr.wqe_inline_mode) {
+ case MLX5_CAP_INLINE_MODE_L2:
+ /* outer L2 header must be inlined. */
+ config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
+ goto exit;
+ case MLX5_CAP_INLINE_MODE_NOT_REQUIRED:
+ /* No inline data are required by NIC. */
+ config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
+ config->hw_vlan_insert =
+ config->hca_attr.wqe_vlan_insert;
+ DRV_LOG(DEBUG, "Tx VLAN insertion is supported");
+ goto exit;
+ case MLX5_CAP_INLINE_MODE_VPORT_CONTEXT:
+ /* inline mode is defined by NIC vport context. */
+ if (!config->hca_attr.eth_virt)
+ break;
+ switch (config->hca_attr.vport_inline_mode) {
+ case MLX5_INLINE_MODE_NONE:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_NONE;
+ goto exit;
+ case MLX5_INLINE_MODE_L2:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_L2;
+ goto exit;
+ case MLX5_INLINE_MODE_IP:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_L3;
+ goto exit;
+ case MLX5_INLINE_MODE_TCP_UDP:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_L4;
+ goto exit;
+ case MLX5_INLINE_MODE_INNER_L2:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_INNER_L2;
+ goto exit;
+ case MLX5_INLINE_MODE_INNER_IP:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_INNER_L3;
+ goto exit;
+ case MLX5_INLINE_MODE_INNER_TCP_UDP:
+ config->txq_inline_min =
+ MLX5_INLINE_HSIZE_INNER_L4;
+ goto exit;
+ }
+ }
+ }
+ /*
+ * We get here if we are unable to deduce
+ * inline data size with DevX. Try PCI ID
+ * to determine old NICs.
+ */
+ switch (spawn->pci_dev->id.device_id) {
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
+ config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
+ config->hw_vlan_insert = 0;
+ break;
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
+ /*
+ * These NICs support VLAN insertion from WQE and
+ * report the wqe_vlan_insert flag. But there is the bug
+ * and PFC control may be broken, so disable feature.
+ */
+ config->hw_vlan_insert = 0;
+ config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
+ break;
+ default:
+ config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
+ break;
+ }
+exit:
+ DRV_LOG(DEBUG, "min tx inline configured: %d", config->txq_inline_min);
+}
+
+/**
+ * Allocate page of door-bells and register it using DevX API.
+ *
+ * @param [in] dev
+ * Pointer to Ethernet device.
+ *
+ * @return
+ * Pointer to new page on success, NULL otherwise.
+ */
+static struct mlx5_devx_dbr_page *
+mlx5_alloc_dbr_page(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_devx_dbr_page *page;
+
+ /* Allocate space for door-bell page and management data. */
+ page = rte_calloc_socket(__func__, 1, sizeof(struct mlx5_devx_dbr_page),
+ RTE_CACHE_LINE_SIZE, dev->device->numa_node);
+ if (!page) {
+ DRV_LOG(ERR, "port %u cannot allocate dbr page",
+ dev->data->port_id);
+ return NULL;
+ }
+ /* Register allocated memory. */
+ page->umem = mlx5_glue->devx_umem_reg(priv->sh->ctx, page->dbrs,
+ MLX5_DBR_PAGE_SIZE, 0);
+ if (!page->umem) {
+ DRV_LOG(ERR, "port %u cannot umem reg dbr page",
+ dev->data->port_id);
+ rte_free(page);
+ return NULL;
+ }
+ return page;
+}
+
+/**
+ * Find the next available door-bell, allocate new page if needed.
+ *
+ * @param [in] dev
+ * Pointer to Ethernet device.
+ * @param [out] dbr_page
+ * Door-bell page containing the page data.
+ *
+ * @return
+ * Door-bell address offset on success, a negative error value otherwise.
+ */
+int64_t
+mlx5_get_dbr(struct rte_eth_dev *dev, struct mlx5_devx_dbr_page **dbr_page)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_devx_dbr_page *page = NULL;
+ uint32_t i, j;
+
+ LIST_FOREACH(page, &priv->dbrpgs, next)
+ if (page->dbr_count < MLX5_DBR_PER_PAGE)
+ break;
+ if (!page) { /* No page with free door-bell exists. */
+ page = mlx5_alloc_dbr_page(dev);
+ if (!page) /* Failed to allocate new page. */
+ return (-1);
+ LIST_INSERT_HEAD(&priv->dbrpgs, page, next);
+ }
+ /* Loop to find bitmap part with clear bit. */
+ for (i = 0;
+ i < MLX5_DBR_BITMAP_SIZE && page->dbr_bitmap[i] == UINT64_MAX;
+ i++)
+ ; /* Empty. */
+ /* Find the first clear bit. */
+ j = rte_bsf64(~page->dbr_bitmap[i]);
+ assert(i < (MLX5_DBR_PER_PAGE / 64));
+ page->dbr_bitmap[i] |= (1 << j);
+ page->dbr_count++;
+ *dbr_page = page;
+ return (((i * 64) + j) * sizeof(uint64_t));
+}
+
+/**
+ * Release a door-bell record.
+ *
+ * @param [in] dev
+ * Pointer to Ethernet device.
+ * @param [in] umem_id
+ * UMEM ID of page containing the door-bell record to release.
+ * @param [in] offset
+ * Offset of door-bell record in page.
+ *
+ * @return
+ * 0 on success, a negative error value otherwise.
+ */
+int32_t
+mlx5_release_dbr(struct rte_eth_dev *dev, uint32_t umem_id, uint64_t offset)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_devx_dbr_page *page = NULL;
+ int ret = 0;
+
+ LIST_FOREACH(page, &priv->dbrpgs, next)
+ /* Find the page this address belongs to. */
+ if (page->umem->umem_id == umem_id)
+ break;
+ if (!page)
+ return -EINVAL;
+ page->dbr_count--;
+ if (!page->dbr_count) {
+ /* Page not used, free it and remove from list. */
+ LIST_REMOVE(page, next);
+ if (page->umem)
+ ret = -mlx5_glue->devx_umem_dereg(page->umem);
+ rte_free(page);
+ } else {
+ /* Mark in bitmap that this door-bell is not in use. */
+ offset /= MLX5_DBR_SIZE;
+ int i = offset / 64;
+ int j = offset % 64;
+
+ page->dbr_bitmap[i] &= ~(1 << j);
+ }
+ return ret;
+}
+
/**
* Spawn an Ethernet device from Verbs information.
*
if (!sh)
return NULL;
config.devx = sh->devx;
+#ifdef HAVE_MLX5DV_DR_ACTION_DEST_DEVX_TIR
+ config.dest_tir = 1;
+#endif
#ifdef HAVE_IBV_MLX5_MOD_SWP
dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_SWP;
#endif
} else if (config.cqe_pad) {
DRV_LOG(INFO, "Rx CQE padding is enabled");
}
+ if (config.devx) {
+ priv->counter_fallback = 0;
+ err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config.hca_attr);
+ if (err) {
+ err = -err;
+ goto error;
+ }
+ if (!config.hca_attr.flow_counters_dump)
+ priv->counter_fallback = 1;
+#ifndef HAVE_IBV_DEVX_ASYNC
+ priv->counter_fallback = 1;
+#endif
+ if (priv->counter_fallback)
+ DRV_LOG(INFO, "Use fall-back DV counter management\n");
+ /* Check for LRO support. */
+ if (config.dest_tir && config.hca_attr.lro_cap) {
+ /* TBD check tunnel lro caps. */
+ config.lro.supported = config.hca_attr.lro_cap;
+ DRV_LOG(DEBUG, "Device supports LRO");
+ /*
+ * If LRO timeout is not configured by application,
+ * use the minimal supported value.
+ */
+ if (!config.lro.timeout)
+ config.lro.timeout =
+ config.hca_attr.lro_timer_supported_periods[0];
+ DRV_LOG(DEBUG, "LRO session timeout set to %d usec",
+ config.lro.timeout);
+ }
+ }
if (config.mprq.enabled && mprq) {
if (config.mprq.stride_num_n > mprq_max_stride_num_n ||
config.mprq.stride_num_n < mprq_min_stride_num_n) {
eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
eth_dev->data->representor_id = priv->representor_id;
}
+ /*
+ * Store associated network device interface index. This index
+ * is permanent throughout the lifetime of device. So, we may store
+ * the ifindex here and use the cached value further.
+ */
+ assert(spawn->ifindex);
+ priv->if_index = spawn->ifindex;
eth_dev->data->dev_private = priv;
priv->dev_data = eth_dev->data;
eth_dev->data->mac_addrs = priv->mac;
claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
if (config.vf && config.vf_nl_en)
mlx5_nl_mac_addr_sync(eth_dev);
- priv->tcf_context = mlx5_flow_tcf_context_create();
- if (!priv->tcf_context) {
- err = -rte_errno;
- DRV_LOG(WARNING,
- "flow rules relying on switch offloads will not be"
- " supported: cannot open libmnl socket: %s",
- strerror(rte_errno));
- } else {
- struct rte_flow_error error;
- unsigned int ifindex = mlx5_ifindex(eth_dev);
-
- if (!ifindex) {
- err = -rte_errno;
- error.message =
- "cannot retrieve network interface index";
- } else {
- err = mlx5_flow_tcf_init(priv->tcf_context,
- ifindex, &error);
- }
- if (err) {
- DRV_LOG(WARNING,
- "flow rules relying on switch offloads will"
- " not be supported: %s: %s",
- error.message, strerror(rte_errno));
- mlx5_flow_tcf_context_destroy(priv->tcf_context);
- priv->tcf_context = NULL;
- }
- }
TAILQ_INIT(&priv->flows);
TAILQ_INIT(&priv->ctrl_flows);
/* Hint libmlx5 to use PMD allocator for data plane resources */
* Verbs context returned by ibv_open_device().
*/
mlx5_link_update(eth_dev, 0);
-#ifdef HAVE_IBV_DEVX_OBJ
- if (config.devx) {
- err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config.hca_attr);
- if (err) {
- err = -err;
- goto error;
- }
- }
-#endif
#ifdef HAVE_MLX5DV_DR_ESWITCH
if (!(config.hca_attr.eswitch_manager && config.dv_flow_en &&
(switch_info->representor || switch_info->master)))
#else
config.dv_esw_en = 0;
#endif
+ /* Detect minimal data bytes to inline. */
+ mlx5_set_min_inline(spawn, &config);
/* Store device configuration on private structure. */
priv->config = config;
+ /* Create context for virtual machine VLAN workaround. */
+ priv->vmwa_context = mlx5_vlan_vmwa_init(eth_dev, spawn->ifindex);
if (config.dv_flow_en) {
err = mlx5_alloc_shared_dr(priv);
if (err)
goto error;
}
priv->config.flow_prio = err;
- /* Add device to memory callback list. */
- rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
- LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
- sh, mem_event_cb);
- rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
return eth_dev;
error:
if (priv) {
close(priv->nl_socket_route);
if (priv->nl_socket_rdma >= 0)
close(priv->nl_socket_rdma);
- if (priv->tcf_context)
- mlx5_flow_tcf_context_destroy(priv->tcf_context);
+ if (priv->vmwa_context)
+ mlx5_vlan_vmwa_exit(priv->vmwa_context);
if (own_domain_id)
claim_zero(rte_eth_switch_domain_free(priv->domain_id));
rte_free(priv);
dev_config = (struct mlx5_dev_config){
.hw_padding = 0,
.mps = MLX5_ARG_UNSET,
- .tx_vec_en = 1,
.rx_vec_en = 1,
- .txq_inline = MLX5_ARG_UNSET,
+ .txq_inline_max = MLX5_ARG_UNSET,
+ .txq_inline_min = MLX5_ARG_UNSET,
+ .txq_inline_mpw = MLX5_ARG_UNSET,
.txqs_inline = MLX5_ARG_UNSET,
- .txqs_vec = MLX5_ARG_UNSET,
- .inline_max_packet_sz = MLX5_ARG_UNSET,
.vf_nl_en = 1,
.mr_ext_memseg_en = 1,
.mprq = {
};
/* Device specific configuration. */
switch (pci_dev->id.device_id) {
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5BF:
- dev_config.txqs_vec = MLX5_VPMD_MAX_TXQS_BLUEFIELD;
- break;
case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
default:
break;
}
- /* Set architecture-dependent default value if unset. */
- if (dev_config.txqs_vec == MLX5_ARG_UNSET)
- dev_config.txqs_vec = MLX5_VPMD_MAX_TXQS;
for (i = 0; i != ns; ++i) {
uint32_t restore;
.dma_map = mlx5_dma_map,
.dma_unmap = mlx5_dma_unmap,
.drv_flags = RTE_PCI_DRV_INTR_LSC | RTE_PCI_DRV_INTR_RMV |
- RTE_PCI_DRV_PROBE_AGAIN | RTE_PCI_DRV_IOVA_AS_VA,
+ RTE_PCI_DRV_PROBE_AGAIN,
};
#ifdef RTE_IBVERBS_LINK_DLOPEN
git.droids-corp.org / dpdk.git / blobdiff