#define RTE_PMD_MLX5_DEFS_H_
#include <rte_ethdev_driver.h>
+#include <rte_vxlan.h>
#include "mlx5_autoconf.h"
* Request TX completion every time descriptors reach this threshold since
* the previous request. Must be a power of two for performance reasons.
*/
-#define MLX5_TX_COMP_THRESH 32
+#define MLX5_TX_COMP_THRESH 32u
/*
* Request TX completion every time the total number of WQEBBs used for inlining
#define MLX5_TX_COMP_THRESH_INLINE_DIV (1 << 3)
/*
- * Maximum number of cached Memory Pools (MPs) per TX queue. Each RTE MP
- * from which buffers are to be transmitted will have to be mapped by this
- * driver to their own Memory Region (MR). This is a slow operation.
- *
- * This value is always 1 for RX queues.
+ * Maximal amount of normal completion CQEs
+ * processed in one call of tx_burst() routine.
*/
-#ifndef MLX5_PMD_TX_MP_CACHE
-#define MLX5_PMD_TX_MP_CACHE 8
-#endif
+#define MLX5_TX_COMP_MAX_CQE 2u
+
+
+/* Size of per-queue MR cache array for linear search. */
+#define MLX5_MR_CACHE_N 8
+
+/* Size of MR cache table for binary search. */
+#define MLX5_MR_BTREE_CACHE_N 256
/*
* If defined, only use software counters. The PMD will never ask the hardware
#define MLX5_PMD_SOFT_COUNTERS 1
#endif
+/* Switch port ID parameters for bonding configurations. */
+#define MLX5_PORT_ID_BONDING_PF_MASK 0xf
+#define MLX5_PORT_ID_BONDING_PF_SHIFT 0xf
+
/* Alarm timeout. */
#define MLX5_ALARM_TIMEOUT_US 100000
#define MLX5_MAX_XSTATS 32
/* Maximum Packet headers size (L2+L3+L4) for TSO. */
-#define MLX5_MAX_TSO_HEADER 128
-
-/* Default minimum number of Tx queues for vectorized Tx. */
-#define MLX5_VPMD_MIN_TXQS 4
+#define MLX5_MAX_TSO_HEADER (128u + 34u)
+
+/* Inline data size required by NICs. */
+#define MLX5_INLINE_HSIZE_NONE 0
+#define MLX5_INLINE_HSIZE_L2 (sizeof(struct rte_ether_hdr) + \
+ sizeof(struct rte_vlan_hdr))
+#define MLX5_INLINE_HSIZE_L3 (MLX5_INLINE_HSIZE_L2 + \
+ sizeof(struct rte_ipv6_hdr))
+#define MLX5_INLINE_HSIZE_L4 (MLX5_INLINE_HSIZE_L3 + \
+ sizeof(struct rte_tcp_hdr))
+#define MLX5_INLINE_HSIZE_INNER_L2 (MLX5_INLINE_HSIZE_L3 + \
+ sizeof(struct rte_udp_hdr) + \
+ sizeof(struct rte_vxlan_hdr) + \
+ sizeof(struct rte_ether_hdr) + \
+ sizeof(struct rte_vlan_hdr))
+#define MLX5_INLINE_HSIZE_INNER_L3 (MLX5_INLINE_HSIZE_INNER_L2 + \
+ sizeof(struct rte_ipv6_hdr))
+#define MLX5_INLINE_HSIZE_INNER_L4 (MLX5_INLINE_HSIZE_INNER_L3 + \
+ sizeof(struct rte_tcp_hdr))
/* Threshold of buffer replenishment for vectorized Rx. */
-#define MLX5_VPMD_RXQ_RPLNSH_THRESH 64U
+#define MLX5_VPMD_RXQ_RPLNSH_THRESH(n) \
+ (RTE_MIN(MLX5_VPMD_RX_MAX_BURST, (unsigned int)(n) >> 2))
/* Maximum size of burst for vectorized Rx. */
-#define MLX5_VPMD_RX_MAX_BURST MLX5_VPMD_RXQ_RPLNSH_THRESH
-
-/*
- * Maximum size of burst for vectorized Tx. This is related to the maximum size
- * of Enhanced MPW (eMPW) WQE as vectorized Tx is supported with eMPW.
- * Careful when changing, large value can cause WQE DS to overlap.
- */
-#define MLX5_VPMD_TX_MAX_BURST 32U
+#define MLX5_VPMD_RX_MAX_BURST 64U
/* Number of packets vectorized Rx can simultaneously process in a loop. */
#define MLX5_VPMD_DESCS_PER_LOOP 4
/* Timeout in seconds to get a valid link status. */
#define MLX5_LINK_STATUS_TIMEOUT 10
-/* Reserved address space for UAR mapping. */
-#define MLX5_UAR_SIZE (1ULL << 32)
+/* Number of times to retry retrieving the physical link information. */
+#define MLX5_GET_LINK_STATUS_RETRY_COUNT 3
+
+/* Maximum number of UAR pages used by a port,
+ * These are the size and mask for an array of mutexes used to synchronize
+ * the access to port's UARs on platforms that do not support 64 bit writes.
+ * In such systems it is possible to issue the 64 bits DoorBells through two
+ * consecutive writes, each write 32 bits. The access to a UAR page (which can
+ * be accessible by all threads in the process) must be synchronized
+ * (for example, using a semaphore). Such a synchronization is not required
+ * when ringing DoorBells on different UAR pages.
+ * A port with 512 Tx queues uses 8, 4kBytes, UAR pages which are shared
+ * among the ports.
+ */
+#define MLX5_UAR_PAGE_NUM_MAX 64
+#define MLX5_UAR_PAGE_NUM_MASK ((MLX5_UAR_PAGE_NUM_MAX) - 1)
+
+/* Log 2 of the default number of strides per WQE for Multi-Packet RQ. */
+#define MLX5_MPRQ_STRIDE_NUM_N 6U
+
+/* Two-byte shift is disabled for Multi-Packet RQ. */
+#define MLX5_MPRQ_TWO_BYTE_SHIFT 0
-/* Offset of reserved UAR address space to hugepage memory. Offset is used here
- * to minimize possibility of address next to hugepage being used by other code
- * in either primary or secondary process, failing to map TX UAR would make TX
- * packets invisible to HW.
+/*
+ * Minimum size of packet to be memcpy'd instead of being attached as an
+ * external buffer.
*/
-#define MLX5_UAR_OFFSET (1ULL << 32)
+#define MLX5_MPRQ_MEMCPY_DEFAULT_LEN 128
+
+/* Minimum number Rx queues to enable Multi-Packet RQ. */
+#define MLX5_MPRQ_MIN_RXQS 12
+
+/* Cache size of mempool for Multi-Packet RQ. */
+#define MLX5_MPRQ_MP_CACHE_SZ 32U
+
+#define MLX5_XMETA_MODE_LEGACY 0
+#define MLX5_XMETA_MODE_META16 1
+#define MLX5_XMETA_MODE_META32 2
+
+/* Definition of static_assert found in /usr/include/assert.h */
+#ifndef HAVE_STATIC_ASSERT
+#define static_assert _Static_assert
+#endif
#endif /* RTE_PMD_MLX5_DEFS_H_ */
git.droids-corp.org / dpdk.git / blobdiff